IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
The only usage of vpu_m2m_ops is to pass its address to v4l2_m2m_init()
which has a pointer to const struct v4l2_m2m_ops as argument. Make it
const to allow the compiler to put it in read-only memory.
Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Reviewed-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The MODULE_DEVICE_TABLE already creates proper alias for platform
driver. Having another MODULE_ALIAS causes the alias to be duplicated.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Cedrus supports only YUV420 H264/H265 content and mostly only 8-bit
colours (except on H6, where 10-bit are also supported).
Add validation callback to SPS controls, which will reject unsupported
combinations.
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Currently only H6 variant supports decoding 10-bit H265 videos.
Add a capability flag, so driver could determine if 10-bit H265 slices
should be allowed or not.
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Tiled formats requires full rows being allocated (even for Chroma
planes). When the number of Luma tiles is odd, we need to round up
to twice the tile width in order to roundup the number of Chroma
tiles.
This was notice with a crash running BA1_FT_C compliance test using
sunxi tiles using GStreamer. Cedrus driver would allocate 9 rows for
Luma, but only 4.5 rows for Chroma, causing userspace to crash.
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Fixes: 50e761516f2b8 ("media: platform: Add Cedrus VPU decoder driver")
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Some cores use only one interrupt and in such case interrupt name in DT
is not needed. Driver supposedly accounted that, but due to the wrong
field check it never worked. Fix that.
Fixes: 18d6c8b7b4c9 ("media: hantro: add fallback handling for single irq/clk")
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Reviewed-by: Ezequiel Garcia <ezequiel@collabora.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Fix a bunch of kernel-doc warnings:
drivers/staging/media/meson/vdec/esparser.h:22: warning: Function parameter or member 'core' not described in 'esparser_queue_eos'
drivers/staging/media/meson/vdec/esparser.h:22: warning: Function parameter or member 'data' not described in 'esparser_queue_eos'
drivers/staging/media/meson/vdec/esparser.h:22: warning: Function parameter or member 'len' not described in 'esparser_queue_eos'
drivers/staging/media/meson/vdec/esparser.h:28: warning: Function parameter or member 'work' not described in 'esparser_queue_all_src'
drivers/staging/media/meson/vdec/vdec.h:92: warning: Function parameter or member 'vdec_hevcf_clk' not described in 'amvdec_core'
drivers/staging/media/meson/vdec/vdec.h:92: warning: Function parameter or member 'vdev_dec' not described in 'amvdec_core'
drivers/staging/media/meson/vdec/vdec.h:92: warning: Function parameter or member 'lock' not described in 'amvdec_core'
drivers/staging/media/meson/vdec/vdec.h:141: warning: Function parameter or member 'resume' not described in 'amvdec_codec_ops'
drivers/staging/media/meson/vdec/vdec.h:274: warning: Function parameter or member 'lock' not described in 'amvdec_session'
drivers/staging/media/meson/vdec/vdec.h:274: warning: Function parameter or member 'sequence_out' not described in 'amvdec_session'
drivers/staging/media/meson/vdec/vdec.h:274: warning: Function parameter or member 'num_dst_bufs' not described in 'amvdec_session'
drivers/staging/media/meson/vdec/vdec.h:274: warning: Function parameter or member 'changed_format' not described in 'amvdec_session'
drivers/staging/media/meson/vdec/vdec.h:274: warning: Function parameter or member 'last_offset' not described in 'amvdec_session'
drivers/staging/media/meson/vdec/vdec.h:274: warning: Function parameter or member 'wrap_count' not described in 'amvdec_session'
drivers/staging/media/meson/vdec/vdec.h:274: warning: Function parameter or member 'fw_idx_to_vb2_idx' not described in 'amvdec_session'
drivers/staging/media/meson/vdec/vdec_helpers.h:59: warning: Function parameter or member 'tc' not described in 'amvdec_add_ts'
drivers/staging/media/meson/vdec/vdec_helpers.h:59: warning: Function parameter or member 'flags' not described in 'amvdec_add_ts'
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Use the devm_platform_ioremap_resource() helper instead of
calling platform_get_resource() and devm_ioremap_resource()
separately
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Some tools like v4l2-compliance let users select a media device based
on the bus_info string which can be quite convenient. Use a unique
string for that.
This also fixes the following v4l2-compliance warning:
warn: v4l2-test-media.cpp(52): empty bus_info
Signed-off-by: Martin Kepplinger <martin.kepplinger@puri.sm>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Even if model and bus_info currently both are 32 bytes large, use
the correct array size for bus_info.
Signed-off-by: Martin Kepplinger <martin.kepplinger@puri.sm>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Use the devm_platform_ioremap_resource_byname() helper instead of
calling platform_get_resource_byname() and devm_ioremap_resource()
separately.
Signed-off-by: zhaoxiao <long870912@gmail.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Several trivial code reformatting changes done according to the coding
style guidelines. These changes improves code organisation and readability
and also 4 address many chackpatch error, warning and check complaints.
Signed-off-by: Deepak R Varma <drv@mailo.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Video capture has been successfully tested using an OV5640 parallel
sensor on a imx6ull-evk board at a 640x480 resolution and UYVY8_2X8
format.
Remove the two items that are no longer pending.
Signed-off-by: Fabio Estevam <festevam@denx.de>
Acked-by: Rui Miguel Silva <rmfrfs@gmail.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Currently, Imgu can not support output the auto-exposure statistics into
ae_raw_buffer in 3A stats buffer, this patch document it.
Signed-off-by: Bingbu Cao <bingbu.cao@intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
There is a wrong comparison of the total size of the loaded firmware
css->fw->size with the size of a pointer to struct imgu_fw_header.
Turn binary_header into a flexible-array member[1][2], use the
struct_size() helper and fix the wrong size comparison. Notice
that the loaded firmware needs to contain at least one 'struct
imgu_fw_info' item in the binary_header[] array.
It's also worth mentioning that
"css->fw->size < struct_size(css->fwp, binary_header, 1)"
with binary_header declared as a flexible-array member is equivalent
to
"css->fw->size < sizeof(struct imgu_fw_header)"
with binary_header declared as a one-element array (as in the original
code).
The replacement of the one-element array with a flexible-array member
also helps with the ongoing efforts to globally enable -Warray-bounds
and get us closer to being able to tighten the FORTIFY_SOURCE routines
on memcpy().
[1] https://en.wikipedia.org/wiki/Flexible_array_member
[2] https://www.kernel.org/doc/html/v5.10/process/deprecated.html#zero-length-and-one-element-arrays
Link: https://github.com/KSPP/linux/issues/79
Link: https://github.com/KSPP/linux/issues/109
Fixes: 09d290f0ba21 ("media: staging/intel-ipu3: css: Add support for firmware management")
Cc: stable@vger.kernel.org
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Inside function gc2235_detect(), variable "low" could be uninitialized
if ov5693_read_reg() returns error, however, it affects the value of
variable "id". The "id" is used in the later if statement, which is
potentially unsafe.
Link: https://lore.kernel.org/linux-media/20210711202334.27959-1-yzhai003@ucr.edu
Signed-off-by: Yizhuo <yzhai003@ucr.edu>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
There were several issues with handling errors in lm3554_probe():
- Probe did not set the error code when v4l2_ctrl_handler_init() failed.
- It intermixed gotos for handling errors of v4l2_ctrl_handler_init()
and media_entity_pads_init().
- It did not set the error code for failures of v4l2_ctrl_new_custom().
- Probe did not free resources in case of failures of
atomisp_register_i2c_module().
The patch fixes all these issues.
Found by Linux Driver Verification project (linuxtesting.org).
Link: https://lore.kernel.org/linux-media/20210810162943.19852-1-novikov@ispras.ru
Signed-off-by: Evgeny Novikov <novikov@ispras.ru>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The input_system_configure_channel_sensor() function lost its final
return code in a previous patch:
drivers/staging/media/atomisp/pci/hive_isp_css_common/host/input_system.c: In function 'input_system_configure_channel_sensor':
drivers/staging/media/atomisp/pci/hive_isp_css_common/host/input_system.c:1649:1: error: control reaches end of non-void function [-Werror=return-type]
Restore what was there originally.
Link: https://lore.kernel.org/linux-media/20210802143820.1150099-1-arnd@kernel.org
Fixes: 728a5c64ae5f ("media: atomisp: remove dublicate code")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The V4L2_PIX_FMT_SUNXI_TILED_NV12 format is actually a fairly
common NV12 tiled format, with 32x32 linear tiles. Rename the format
and move its documentation together with the other tiled NV12 formats.
Keep V4L2_PIX_FMT_SUNXI_TILED_NV12 for application compatibility.
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
There is no reason for the cedrus driver to set min_buffers_needed.
A non-zero min_buffers_needed can cause problems with the Request API
if start_streaming fails when queueing a buffer from a request.
Since it is not needed for this driver, just remove it.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Cc: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Reviewed-by: Ezequiel Garcia <ezequiel@collabora.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
HEVC frames may use scaling list feature. Add support for it.
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
If the bitstream embedded scaling lists allow the driver to use
them for decode the frames.
The scaling lists are expected to be in raster scan order (i.e. not up
right diagonal scan order)
Allocate the memory needed to store lists.
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Reviewed-by: Ezequiel Garcia <ezequiel@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
[hverkuil: add missing @scaling kernel doc description in hantro_hw.h]
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Rename V4L2 async notifier functions, replacing "notifier" with "nf" and
removing "_subdev" at the end of the function names adding subdevs as you
can only add subdevs to a notifier. Also wrap and otherwise clean up long
lines.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Rui Miguel Silva <rmfrfs@gmail.com> (imx7)
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
- Add -s option (strict mode) to merge_config.sh to make it fail when
any symbol is redefined.
- Show a warning if a different compiler is used for building external
modules.
- Infer --target from ARCH for CC=clang to let you cross-compile the
kernel without CROSS_COMPILE.
- Make the integrated assembler default (LLVM_IAS=1) for CC=clang.
- Add <linux/stdarg.h> to the kernel source instead of borrowing
<stdarg.h> from the compiler.
- Add Nick Desaulniers as a Kbuild reviewer.
- Drop stale cc-option tests.
- Fix the combination of CONFIG_TRIM_UNUSED_KSYMS and CONFIG_LTO_CLANG
to handle symbols in inline assembly.
- Show a warning if 'FORCE' is missing for if_changed rules.
- Various cleanups
-----BEGIN PGP SIGNATURE-----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=lw3M
-----END PGP SIGNATURE-----
Merge tag 'kbuild-v5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- Add -s option (strict mode) to merge_config.sh to make it fail when
any symbol is redefined.
- Show a warning if a different compiler is used for building external
modules.
- Infer --target from ARCH for CC=clang to let you cross-compile the
kernel without CROSS_COMPILE.
- Make the integrated assembler default (LLVM_IAS=1) for CC=clang.
- Add <linux/stdarg.h> to the kernel source instead of borrowing
<stdarg.h> from the compiler.
- Add Nick Desaulniers as a Kbuild reviewer.
- Drop stale cc-option tests.
- Fix the combination of CONFIG_TRIM_UNUSED_KSYMS and CONFIG_LTO_CLANG
to handle symbols in inline assembly.
- Show a warning if 'FORCE' is missing for if_changed rules.
- Various cleanups
* tag 'kbuild-v5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (39 commits)
kbuild: redo fake deps at include/ksym/*.h
kbuild: clean up objtool_args slightly
modpost: get the *.mod file path more simply
checkkconfigsymbols.py: Fix the '--ignore' option
kbuild: merge vmlinux_link() between ARCH=um and other architectures
kbuild: do not remove 'linux' link in scripts/link-vmlinux.sh
kbuild: merge vmlinux_link() between the ordinary link and Clang LTO
kbuild: remove stale *.symversions
kbuild: remove unused quiet_cmd_update_lto_symversions
gen_compile_commands: extract compiler command from a series of commands
x86: remove cc-option-yn test for -mtune=
arc: replace cc-option-yn uses with cc-option
s390: replace cc-option-yn uses with cc-option
ia64: move core-y in arch/ia64/Makefile to arch/ia64/Kbuild
sparc: move the install rule to arch/sparc/Makefile
security: remove unneeded subdir-$(CONFIG_...)
kbuild: sh: remove unused install script
kbuild: Fix 'no symbols' warning when CONFIG_TRIM_UNUSD_KSYMS=y
kbuild: Switch to 'f' variants of integrated assembler flag
kbuild: Shuffle blank line to improve comment meaning
...
-----BEGIN PGP SIGNATURE-----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=PQpb
-----END PGP SIGNATURE-----
Merge tag 'media/v5.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media updates from Mauro Carvalho Chehab:
- new sensor drivers: imx335, imx412, ov9282
- new IR transmitter driver: meson-ir-tx
- handro driver gained support for H.264 for Rockchip VDPU2
- imx gained support for i.MX8MQ
- ti-vpe has gained support for other SoC variants
- lots of cleanups, fixes, board additions and doc improvements
* tag 'media/v5.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (195 commits)
media: venus: venc: add support for V4L2_CID_MPEG_VIDEO_H264_8X8_TRANSFORM control
media: venus: venc: Add support for intra-refresh period
media: v4l2-ctrls: Add intra-refresh period control
media: docs: ext-ctrls-codec: Document cyclic intra-refresh zero control value
media: venus: helper: do not set constrained parameters for UBWC
media: venus: venc: Fix potential null pointer dereference on pointer fmt
media: venus: hfi: fix return value check in sys_get_prop_image_version()
media: tegra-cec: Handle errors of clk_prepare_enable()
media: cec-pin: rename timer overrun variables
media: TDA1997x: report -ENOLINK after disconnecting HDMI source
media: TDA1997x: fix tda1997x_query_dv_timings() return value
media: Fix cosmetic error in TDA1997x driver
media: v4l2-dv-timings.c: fix wrong condition in two for-loops
media: imx: add a driver for i.MX8MQ mipi csi rx phy and controller
media: dt-bindings: media: document the nxp,imx8mq-mipi-csi2 receiver phy and controller
media: imx: imx7_mipi_csis: convert some switch cases to the default
media: imx: imx7-media-csi: Fix buffer return upon stream start failure
media: imx: imx7-media-csi: Don't set PIXEL_BIT in CSICR1
media: imx: imx7-media-csi: Set TWO_8BIT_SENSOR for >= 10-bit formats
media: dt-bindings: media: nxp,imx7-csi: Add i.MX8MM support
...
The regular pile:
- A few improvements to the mutex code
- Documentation updates for atomics to clarify the difference between
cmpxchg() and try_cmpxchg() and to explain the forward progress
expectations.
- Simplification of the atomics fallback generator
- The addition of arch_atomic_long*() variants and generic arch_*()
bitops based on them.
- Add the missing might_sleep() invocations to the down*() operations of
semaphores.
The PREEMPT_RT locking core:
- Scheduler updates to support the state preserving mechanism for
'sleeping' spin- and rwlocks on RT. This mechanism is carefully
preserving the state of the task when blocking on a 'sleeping' spin- or
rwlock and takes regular wake-ups targeted at the same task into
account. The preserved or updated (via a regular wakeup) state is
restored when the lock has been acquired.
- Restructuring of the rtmutex code so it can be utilized and extended
for the RT specific lock variants.
- Restructuring of the ww_mutex code to allow sharing of the ww_mutex
specific functionality for rtmutex based ww_mutexes.
- Header file disentangling to allow substitution of the regular lock
implementations with the PREEMPT_RT variants without creating an
unmaintainable #ifdef mess.
- Shared base code for the PREEMPT_RT specific rw_semaphore and rwlock
implementations. Contrary to the regular rw_semaphores and rwlocks the
PREEMPT_RT implementation is writer unfair because it is infeasible to
do priority inheritance on multiple readers. Experience over the years
has shown that real-time workloads are not the typical workloads which
are sensitive to writer starvation. The alternative solution would be
to allow only a single reader which has been tried and discarded as it
is a major bottleneck especially for mmap_sem. Aside of that many of
the writer starvation critical usage sites have been converted to a
writer side mutex/spinlock and RCU read side protections in the past
decade so that the issue is less prominent than it used to be.
- The actual rtmutex based lock substitutions for PREEMPT_RT enabled
kernels which affect mutex, ww_mutex, rw_semaphore, spinlock_t and
rwlock_t. The spin/rw_lock*() functions disable migration across the
critical section to preserve the existing semantics vs. per CPU
variables.
- Rework of the futex REQUEUE_PI mechanism to handle the case of early
wake-ups which interleave with a re-queue operation to prevent the
situation that a task would be blocked on both the rtmutex associated
to the outer futex and the rtmutex based hash bucket spinlock.
While this situation cannot happen on !RT enabled kernels the changes
make the underlying concurrency problems easier to understand in
general. As a result the difference between !RT and RT kernels is
reduced to the handling of waiting for the critical section. !RT
kernels simply spin-wait as before and RT kernels utilize rcu_wait().
- The substitution of local_lock for PREEMPT_RT with a spinlock which
protects the critical section while staying preemptible. The CPU
locality is established by disabling migration.
The underlying concepts of this code have been in use in PREEMPT_RT for
way more than a decade. The code has been refactored several times over
the years and this final incarnation has been optimized once again to be
as non-intrusive as possible, i.e. the RT specific parts are mostly
isolated.
It has been extensively tested in the 5.14-rt patch series and it has
been verified that !RT kernels are not affected by these changes.
-----BEGIN PGP SIGNATURE-----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=IEqE
-----END PGP SIGNATURE-----
Merge tag 'locking-core-2021-08-30' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking and atomics updates from Thomas Gleixner:
"The regular pile:
- A few improvements to the mutex code
- Documentation updates for atomics to clarify the difference between
cmpxchg() and try_cmpxchg() and to explain the forward progress
expectations.
- Simplification of the atomics fallback generator
- The addition of arch_atomic_long*() variants and generic arch_*()
bitops based on them.
- Add the missing might_sleep() invocations to the down*() operations
of semaphores.
The PREEMPT_RT locking core:
- Scheduler updates to support the state preserving mechanism for
'sleeping' spin- and rwlocks on RT.
This mechanism is carefully preserving the state of the task when
blocking on a 'sleeping' spin- or rwlock and takes regular wake-ups
targeted at the same task into account. The preserved or updated
(via a regular wakeup) state is restored when the lock has been
acquired.
- Restructuring of the rtmutex code so it can be utilized and
extended for the RT specific lock variants.
- Restructuring of the ww_mutex code to allow sharing of the ww_mutex
specific functionality for rtmutex based ww_mutexes.
- Header file disentangling to allow substitution of the regular lock
implementations with the PREEMPT_RT variants without creating an
unmaintainable #ifdef mess.
- Shared base code for the PREEMPT_RT specific rw_semaphore and
rwlock implementations.
Contrary to the regular rw_semaphores and rwlocks the PREEMPT_RT
implementation is writer unfair because it is infeasible to do
priority inheritance on multiple readers. Experience over the years
has shown that real-time workloads are not the typical workloads
which are sensitive to writer starvation.
The alternative solution would be to allow only a single reader
which has been tried and discarded as it is a major bottleneck
especially for mmap_sem. Aside of that many of the writer
starvation critical usage sites have been converted to a writer
side mutex/spinlock and RCU read side protections in the past
decade so that the issue is less prominent than it used to be.
- The actual rtmutex based lock substitutions for PREEMPT_RT enabled
kernels which affect mutex, ww_mutex, rw_semaphore, spinlock_t and
rwlock_t. The spin/rw_lock*() functions disable migration across
the critical section to preserve the existing semantics vs per-CPU
variables.
- Rework of the futex REQUEUE_PI mechanism to handle the case of
early wake-ups which interleave with a re-queue operation to
prevent the situation that a task would be blocked on both the
rtmutex associated to the outer futex and the rtmutex based hash
bucket spinlock.
While this situation cannot happen on !RT enabled kernels the
changes make the underlying concurrency problems easier to
understand in general. As a result the difference between !RT and
RT kernels is reduced to the handling of waiting for the critical
section. !RT kernels simply spin-wait as before and RT kernels
utilize rcu_wait().
- The substitution of local_lock for PREEMPT_RT with a spinlock which
protects the critical section while staying preemptible. The CPU
locality is established by disabling migration.
The underlying concepts of this code have been in use in PREEMPT_RT for
way more than a decade. The code has been refactored several times over
the years and this final incarnation has been optimized once again to be
as non-intrusive as possible, i.e. the RT specific parts are mostly
isolated.
It has been extensively tested in the 5.14-rt patch series and it has
been verified that !RT kernels are not affected by these changes"
* tag 'locking-core-2021-08-30' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (92 commits)
locking/rtmutex: Return success on deadlock for ww_mutex waiters
locking/rtmutex: Prevent spurious EDEADLK return caused by ww_mutexes
locking/rtmutex: Dequeue waiter on ww_mutex deadlock
locking/rtmutex: Dont dereference waiter lockless
locking/semaphore: Add might_sleep() to down_*() family
locking/ww_mutex: Initialize waiter.ww_ctx properly
static_call: Update API documentation
locking/local_lock: Add PREEMPT_RT support
locking/spinlock/rt: Prepare for RT local_lock
locking/rtmutex: Add adaptive spinwait mechanism
locking/rtmutex: Implement equal priority lock stealing
preempt: Adjust PREEMPT_LOCK_OFFSET for RT
locking/rtmutex: Prevent lockdep false positive with PI futexes
futex: Prevent requeue_pi() lock nesting issue on RT
futex: Simplify handle_early_requeue_pi_wakeup()
futex: Reorder sanity checks in futex_requeue()
futex: Clarify comment in futex_requeue()
futex: Restructure futex_requeue()
futex: Correct the number of requeued waiters for PI
futex: Remove bogus condition for requeue PI
...
This reverts commit 819fbd3d8ef36c09576c2a0ffea503f5c46e9177.
It turns out that some user-space applications use these uapi header
files, so even though the only user of the interface is an old driver
that was moved to staging, moving the header files causes unnecessary
pain.
Generally, we really don't want user space to use kernel headers
directly (exactly because it causes pain when we re-organize), and
instead copy them as needed. But these things happen, and the headers
were in the uapi directory, so I guess it's not entirely unreasonable.
Link: https://lore.kernel.org/lkml/4e3e0d40-df4a-94f8-7c2d-85010b0873c4@web.de/
Reported-by: Soeren Moch <smoch@web.de>
Cc: stable@kernel.org # 5.13
Cc: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Ship minimal stdarg.h (1 type, 4 macros) as <linux/stdarg.h>.
stdarg.h is the only userspace header commonly used in the kernel.
GPL 2 version of <stdarg.h> can be extracted from
http://archive.debian.org/debian/pool/main/g/gcc-4.2/gcc-4.2_4.2.4.orig.tar.gz
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Delete/fixup few includes in anticipation of global -isystem compile
option removal.
Note: crypto/aegis128-neon-inner.c keeps <stddef.h> due to redefinition
of uintptr_t error (one definition comes from <stddef.h>, another from
<linux/types.h>).
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
The only user of rt_mutex_is_locked() is an anti-pattern, remove it.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20210815211302.491442626@linutronix.de
Add a driver to support the i.MX8MQ MIPI CSI receiver. The hardware side
is based on
https://source.codeaurora.org/external/imx/linux-imx/tree/drivers/media/platform/imx8/mxc-mipi-csi2_yav.c?h=imx_5.4.70_2.3.0
It's built as part of VIDEO_IMX7_CSI because that's documented to support
i.MX8M platforms. This driver adds i.MX8MQ support where currently only the
i.MX8MM platform has been supported.
Signed-off-by: Martin Kepplinger <martin.kepplinger@puri.sm>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Static analysis reports this false positive
imx7-mipi-csis.c:1027:2: warning: 4th function call argument is
an uninitialized value
The variable 'align' is falsely reported as uninitialized.
Even though all the cases are covered in the
switch (csis_fmt->width % 8) {
Because there is no default case, it is reported as uninialized.
Improve the switch by converting the most numerous set of cases
to the default and silence the false positive.
Signed-off-by: Tom Rix <trix@redhat.com>
Reviewed-by: Rui Miguel Silva <rmfrfs@gmail.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
When the stream fails to start, the first two buffers in the queue have
been moved to the active_vb2_buf array and are returned to vb2 by
imx7_csi_dma_unsetup_vb2_buf(). The function is called with the buffer
state set to VB2_BUF_STATE_ERROR unconditionally, which is correct when
stopping the stream, but not when the start operation fails. In that
case, the state should be set to VB2_BUF_STATE_QUEUED. Fix it.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Martin Kepplinger <martin.kepplinger@puri.sm>
Reviewed-by: Rui Miguel Silva <rmfrfs@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The PIXEL_BIT field of the CSICR1 register is documented as setting the
Bayer data width to 10 bits, and is set by the driver for all non-YUV
pixel formats. Test code from NXP showed that the bit shouldn't be set
for Bayer formats, and this was confirmed by experimentation with RAW8
capture (which doesn't work when setting the field) and RAW10 capture
(for which setting the field doesn't seem to make a difference) on
i.MX8MM with an OV5640 sensor connected over CSI-2. Don't set it.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Rui Miguel Silva <rmfrfs@gmail.com>
Tested-by: Martin Kepplinger <martin.kepplinger@puri.sm>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Sample code from NXP, as well as experiments on i.MX8MM with RAW10
capture with an OV5640 sensor connected over CSI-2, showed that the
TWO_8BIT_SENSOR field of the CSICR3 register needs to be set for formats
larger than 8 bits. Do so, even if the reference manual doesn't clearly
describe the effect of the field.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Martin Kepplinger <martin.kepplinger@puri.sm>
Reviewed-by: Rui Miguel Silva <rmfrfs@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Misplaced braces makes it difficult to follow the code easily. This also
goes against the code style guidelines. This resolved following checkpatch
complaints:
ERROR: open brace '{' following function definitions go on the next line
ERROR: that open brace { should be on the previous line
Link: https://lore.kernel.org/linux-media/YIwk3KbVGRPJwKa4@dU2104
[mchehab: dropped a hunk with a merge conflict]
Cc: linux-media@vger.kernel.org, devel@driverdev.osuosl.org, linux-kernel@vger.kernel.org, drv@mailo.com # X-LSpam-Score: -7.3 (-------)
Signed-off-by: Deepak R Varma <drv@mailo.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
There is no need to memset() both dvs_grid_info and dvs_stat_grid_info
separately: they are part of the same union. Instead, just zero the
union itself. This additionally avoids a false positive (due to a
gcc optimization bug[1]) when building with the coming FORTIFY_SOURCE
improvements:
In function 'fortify_memset_chk',
inlined from 'sh_css_pipe_get_grid_info' at drivers/staging/media/atomisp/pci/sh_css.c:5186:3,
inlined from 'ia_css_stream_create' at drivers/staging/media/atomisp/pci/sh_css.c:9442:10:
./include/linux/fortify-string.h:199:4: warning: call to '__write_overflow_field' declared with attribute warning: detected write beyond size of field (1st parameter); maybe use struct_group()? [-Wattribute-warning]
199 | __write_overflow_field();
| ^~~~~~~~~~~~~~~~~~~~~~~~
[1] https://gcc.gnu.org/bugzilla/show_bug.cgi?id=101419
Link: https://lore.kernel.org/linux-media/20210711145101.1434065-1-keescook@chromium.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Removed an unnecessary (void *) cast for an argument passed to kfree().
Link: https://lore.kernel.org/linux-media/20210605020855.1065-3-fmdefrancesco@gmail.com
Suggested-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Fabio M. De Francesco <fmdefrancesco@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Removed checks for pointers != NULL before freeing memory. If kvfree()
and kfree() are given NULL pointers no operations are performed, so
there is no need for the above-mentioned checks. Coccinelle detected the
second of the two unnecessary checks.
Link: https://lore.kernel.org/linux-media/20210527193922.25225-1-fmdefrancesco@gmail.com
Signed-off-by: Fabio M. De Francesco <fmdefrancesco@gmail.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
There are definitions in the header that are not used by all modules inside
the driver. Annotate them with __maybe_unused to avoid compiler warnings.
Link: https://lore.kernel.org/linux-media/20210526124322.48915-4-andriy.shevchenko@linux.intel.com
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Static analysis reports this representative problem
atomisp-gc2235.c:867:20: warning: The right operand
of '|' is a garbage value
id = ((high << 8) | low);
^ ~~~
When gc2235_read_reg() fails, its return val is never written.
For gc2235_detect(), high and low are or-ed and compared
with GC2235_ID, 0x2235. Initialize both to 0 and skip
checking the read returns, it's errors are not passed up, only
-ENODEV is.
Link: https://lore.kernel.org/linux-media/20210521194805.2078135-1-trix@redhat.com
Signed-off-by: Tom Rix <trix@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
This patch fixes whitespace at the beginning of line by wrapping after
the type name and aligning the arguments with the open parenthesis.
Identified by checkpatch: WARNING: please, no spaces at the start of a
line.
Link: https://lore.kernel.org/linux-media/20210524173609.672153-1-aniketmail669@gmail.com
Signed-off-by: Aniket Bhattacharyea <aniketmail669@gmail.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
sysfs_emit() is preferred over raw sprintf() for sysfs attributes since it
knows about the sysfs buffer specifics and has some built-in sanity checks.
Link: https://lore.kernel.org/linux-media/20210513034650.252993-1-phind.uet@gmail.com
Signed-off-by: Nguyen Dinh Phi <phind.uet@gmail.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
