IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
This attribute is not used because it will be overridden some lines
below:
wattrset(main_window, attr_main_menu_box);
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
The current attributes setup code is strange; the array attribute[]
is set to values outside the range of the attribute_t enum.
At least,
attributes_t attributes[ATTR_MAX+1] = {0};
... should be
int attribute[ATTR_MAX+1] = {0};
Also, there is no need to hard-code the color-pair numbers in
attributes_t.
The current code is messy. Rewrite it.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
The rootmenu always has a prompt even if the 'mainmenu' statement is
missing in the top Kconfig file.
conf_parse() calls menu_add_prompt(P_MENU, "Main menu", NULL) in this
case.
So, every 'menu' has a prompt.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
This reverts commit 10175ba65fde ("nconfig: Silence unused return values
from wattrset").
With this patch applied, recent GCC versions can cleanly build nconf
without "value computed is not used" warnings.
The wattrset() used to be implemented as a macro, like this:
#define wattrset(win,at) \
(NCURSES_OK_ADDR(win) \
? ((win)->_attrs = NCURSES_CAST(attr_t, at), \
OK) \
: ERR)
The GCC bugzilla [1] reported a false-positive -Wunused-value warning
in a similar test case. It was fixed by GCC 4.4.1.
Let's revert that commit, and see if somebody will claim the issue.
[1]: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=39889
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
The lower 8-bit of attributes should be 0, but this code wrongly
sets it to NORMAL (=1). The correct one is A_NORMAL.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
snprintf() always terminates the destination buffer with '\0' even if
the buffer is not long enough. (In this case, the last element of the
buffer becomes '\0'.)
The explicit termination is unneeded.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
When the .config file is missing, 'make config', 'make menuconfig', etc.
uses a file listed in DEFCONFIG_LIST, if found, as base configuration.
Ususally, /boot/config-$(uname -r) exists, and is used as default.
However, when you are cross-compiling the kernel, it does not make
sense to use /boot/config-* on the build host. It should default to
arch/$(SRCARCH)/configs/$(KBUILD_DEFCONFIG).
UML previously did not use DEFCONFIG_LIST at all, but it should be
able to use arch/um/configs/$(KBUILD_DEFCONFIG) as a base config file.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
sym_change_count has no good reason to be 'int' type.
sym_set_change_count() compares the old and new values after casting
both of them to (bool). I do not see any practical diffrence between
sym_set_change_count(1) and sym_add_change_count(1).
Use the boolean flag, conf_changed.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
The following code in get_mext_match():
index = (index + items_num) % items_num;
... makes the program crash when items_num is zero (that is, the menu
is empty).
A menu can be empty when all the options in it are hidden by unmet
'depends on'.
For example,
menu "This menu will be empty"
config FOO
bool "foo"
depends on BROKEN
endmenu
If you visit this menu and press a '/' key and then another key, nconf
crashes with:
Floating point exception (core dumped)
When the number of items is zero, it does not make sense to search in
the menu. In this case, current_item() returns NULL, and item_index()
ERR, but get_mext_match() does not check it.
Let's make get_mext_match() just return if the menu is empty.
While I am here, change items_num from 'int' to 'unsigned int' because
it should never become negative.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
fixed the following coccicheck:
./scripts/kconfig/confdata.c:36:9-10: WARNING: return of 0/1 in function
'is_dir' with return type bool
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Now "modules" is the only member of the "option" property.
Remove "option", and move "modules" to the top level property.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
allnoconfig_y is an ugly hack that sets a symbol to 'y' by allnoconfig.
allnoconfig does not mean a minimal set of CONFIG options because a
bunch of prompts are hidden by 'if EMBEDDED' or 'if EXPERT', but I do
not like to hack Kconfig this way.
Use the pre-existing feature, KCONFIG_ALLCONFIG, to provide a one
liner config fragment. CONFIG_EMBEDDED=y is still forced when
allnoconfig is invoked as a part of tinyconfig.
No change in the .config file produced by 'make tinyconfig'.
The output of 'make allnoconfig' will be changed; we will get
CONFIG_EMBEDDED=n because allnoconfig literally sets all symbols to n.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
This is a partial revert of commit 2a86f6612164 ("kbuild: use
KBUILD_DEFCONFIG as the fallback for DEFCONFIG_LIST").
Now that the reference to $(DEFCONFIG_LIST) was removed from
init/Kconfig, the default KBUILD_DEFCONFIG can go back home.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
"defconfig_list" is a weird option that defines a static symbol that
declares the list of base config files in case the .config does not
exist yet.
This is quite different from other normal symbols; we just abused the
"string" type and the "default" properties to list out the input files.
They must be fixed values since these are searched for and loaded in
the parse stage.
It is an ugly hack, and should not exist in the first place. Providing
this feature as an environment variable is a saner approach.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
This function is only used in conf.c. Move it there together with the
randomize_choice_values() helper.
Define 'enum conf_def_mode' locally in conf.c as well.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
pahole v1.21 supports the --btf_gen_floats flag, which makes it
generate the information about the floating-point types [1].
Adjust link-vmlinux.sh to pass this flag to pahole in case it's
supported, which is determined using a simple version check.
[1] https://lore.kernel.org/dwarves/YHRiXNX1JUF2Az0A@kernel.org/
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210413190043.21918-1-iii@linux.ibm.com
msm-next pull request has a baseline with stuff from -fixes, roll
forward first.
Some simple conflicts in amdgpu, ttm and one in i915 where git gets
confused and tries to add the same function twice.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Conflicts:
MAINTAINERS
- keep Chandrasekar
drivers/net/ethernet/mellanox/mlx5/core/en_main.c
- simple fix + trust the code re-added to param.c in -next is fine
include/linux/bpf.h
- trivial
include/linux/ethtool.h
- trivial, fix kdoc while at it
include/linux/skmsg.h
- move to relevant place in tcp.c, comment re-wrapped
net/core/skmsg.c
- add the sk = sk // sk = NULL around calls
net/tipc/crypto.c
- trivial
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
CONFIG_CFI_CLANG_SHADOW assumes the __cfi_check() function is page
aligned and at the beginning of the .text section. While Clang would
normally align the function correctly, it fails to do so for modules
with no executable code.
This change ensures the correct __cfi_check() location and
alignment. It also discards the .eh_frame section, which Clang can
generate with certain sanitizers, such as CFI.
Link: https://bugs.llvm.org/show_bug.cgi?id=46293
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Acked-by: Jessica Yu <jeyu@kernel.org>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20210408182843.1754385-5-samitolvanen@google.com
This change adds support for Clang’s forward-edge Control Flow
Integrity (CFI) checking. With CONFIG_CFI_CLANG, the compiler
injects a runtime check before each indirect function call to ensure
the target is a valid function with the correct static type. This
restricts possible call targets and makes it more difficult for
an attacker to exploit bugs that allow the modification of stored
function pointers. For more details, see:
https://clang.llvm.org/docs/ControlFlowIntegrity.html
Clang requires CONFIG_LTO_CLANG to be enabled with CFI to gain
visibility to possible call targets. Kernel modules are supported
with Clang’s cross-DSO CFI mode, which allows checking between
independently compiled components.
With CFI enabled, the compiler injects a __cfi_check() function into
the kernel and each module for validating local call targets. For
cross-module calls that cannot be validated locally, the compiler
calls the global __cfi_slowpath_diag() function, which determines
the target module and calls the correct __cfi_check() function. This
patch includes a slowpath implementation that uses __module_address()
to resolve call targets, and with CONFIG_CFI_CLANG_SHADOW enabled, a
shadow map that speeds up module look-ups by ~3x.
Clang implements indirect call checking using jump tables and
offers two methods of generating them. With canonical jump tables,
the compiler renames each address-taken function to <function>.cfi
and points the original symbol to a jump table entry, which passes
__cfi_check() validation. This isn’t compatible with stand-alone
assembly code, which the compiler doesn’t instrument, and would
result in indirect calls to assembly code to fail. Therefore, we
default to using non-canonical jump tables instead, where the compiler
generates a local jump table entry <function>.cfi_jt for each
address-taken function, and replaces all references to the function
with the address of the jump table entry.
Note that because non-canonical jump table addresses are local
to each component, they break cross-module function address
equality. Specifically, the address of a global function will be
different in each module, as it's replaced with the address of a local
jump table entry. If this address is passed to a different module,
it won’t match the address of the same function taken there. This
may break code that relies on comparing addresses passed from other
components.
CFI checking can be disabled in a function with the __nocfi attribute.
Additionally, CFI can be disabled for an entire compilation unit by
filtering out CC_FLAGS_CFI.
By default, CFI failures result in a kernel panic to stop a potential
exploit. CONFIG_CFI_PERMISSIVE enables a permissive mode, where the
kernel prints out a rate-limited warning instead, and allows execution
to continue. This option is helpful for locating type mismatches, but
should only be enabled during development.
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20210408182843.1754385-2-samitolvanen@google.com
Merge module sections only when using Clang LTO. With ld.bfd, merging
sections does not appear to update the symbol tables for the module,
e.g. 'readelf -s' shows the value that a symbol would have had, if
sections were not merged. ld.lld does not show this problem.
The stale symbol table breaks gdb's function disassembler, and presumably
other things, e.g.
gdb -batch -ex "file arch/x86/kvm/kvm.ko" -ex "disassemble kvm_init"
reads the wrong bytes and dumps garbage.
Fixes: dd2776222abb ("kbuild: lto: merge module sections")
Cc: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Sami Tolvanen <samitolvanen@google.com>
Tested-by: Sami Tolvanen <samitolvanen@google.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20210322234438.502582-1-seanjc@google.com
Change the description parsing logic in rst mode in order
to parse it line per line.
The end result is the same, but doing line per line allows
to add some code to escape literal blocks when seeking for
cross-references.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/d33cfa2e59ecf8f28d4ed7de7402468cf2168921.1616668017.git.mchehab+huawei@kernel.org
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
There are some issues with the regex that seeks for What:
cross references: basically, it is mis-identifying the start
and the end boundaries of the regex, which causes :ref: to
be inseerted for the wrong symbols at the wrong places.
Fix it.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/79a14d2518499b76931b5f29c50979987108152d.1616668017.git.mchehab+huawei@kernel.org
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
The parser for the symbols defined on What: doesn't cover all
chars that need to be scaped, like '{' and '}'. Change the logic
to be more generic, and ensure that the same regex will be used
on both What: and when parsing the cross-references.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/29cb56def89b508fe605bcd2ba74a4376cc08e35.1616668017.git.mchehab+huawei@kernel.org
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Make 'make tar-pkg' and 'tarbz2-pkg' work on riscv.
Signed-off-by: Carlos de Paula <me@carlosedp.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
Currently, kernel-doc start parsing the comment as a kernel-doc comment if
it starts with '/**', but does not take into account if the content inside
the comment too, adheres with the expected format.
This results in unexpected and unclear warnings for the user.
E.g., running scripts/kernel-doc -none mm/memcontrol.c emits:
"mm/memcontrol.c:961: warning: expecting prototype for do not fallback to current(). Prototype was for get_mem_cgroup_from_current() instead"
Here kernel-doc parses the corresponding comment as a kernel-doc comment
and expects prototype for it in the next lines, and as a result causing
this warning.
Provide a clearer warning message to the users regarding the same, if the
content inside the comment does not follow the kernel-doc expected format.
Signed-off-by: Aditya Srivastava <yashsri421@gmail.com>
Link: https://lore.kernel.org/r/20210329092945.13152-1-yashsri421@gmail.com
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
The previous attempt to properly handle literal blocks broke parsing of
parameter lines containing colons; fix it by tweaking the regex to
specifically exclude the "::" pattern while accepting lines containing
colons in general. Add a little documentation to the regex while in the
neighborhood.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Fixes: 8d295fbad687 ("kernel-doc: better handle '::' sequences")
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Right now, if one of the following headers end with a '::', the
kernel-doc script will do the wrong thing:
description|context|returns?|notes?|examples?
The real issue is with examples, as people could try to write
something like:
example::
/* Some C code */
and this won't be properly evaluated. So, improve the regex
to not catch '\w+::' regex for the above identifiers.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/2cf44cf1fa42588632735d4fbc8e84304bdc235f.1616696051.git.mchehab+huawei@kernel.org
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
The current option parse code is clumsy.
The 's' option is separately handled in an if-conditional due to the
following code:
input_mode = (enum input_mode)opt;
If 's' is moved to the switch statement, the invalid value 's' would
be assigned to the input_mode.
Another potential problem is that we are mixing 'enum input_mode' and
ASCII characters. They could overwrap if we add more input modes.
To separate them out, set the flag field of long options to a pointer
of input_mode_opt. For mode select options, getopt_long() returns 0,
which never causes overwrap with ASCII characters that represent short
options.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
This code is too big to be placed in the switch statement.
Move the code into a new helper function. I slightly refactor the code
without changing the behavior.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Add a generic rule to apply fdtoverlay in Makefile.lib, so every
platform doesn't need to carry the complex rule. This also automatically
adds "DTC_FLAGS_foo_base += -@" for all base files.
The platform's Makefile only needs to have this now:
foo-dtbs := foo_base.dtb foo_overlay1.dtbo foo_overlay2.dtbo
dtb-y := foo.dtb
We don't want to run schema checks on foo.dtb (as foo.dts doesn't exist)
and the Makefile is updated accordingly.
Acked-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Co-developed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Frank Rowand <frank.rowand@sony.com>
Tested-by: Frank Rowand <frank.rowand@sony.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20920b0df6b067aca4040459a9677d7d1d6d766a.1615354376.git.viresh.kumar@linaro.org
We update 'always-y' based on CONFIG_OF_ALL_DTBS three times. It would be
far more straight forward if we rather update dtb-y to include all .dtb
files if CONFIG_OF_ALL_DTBS is enabled.
Acked-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Frank Rowand <frank.rowand@sony.com>
Tested-by: Frank Rowand <frank.rowand@sony.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/7fe7e5ef6ed75450ddf6c224b8adb53059e504e2.1615354376.git.viresh.kumar@linaro.org
By default, emacs indents Perl files with 4 spaces, but will use tabs
where 8 spaces are used. Add a vim command of softtabstop=4, to make vim
behave the same. This should remove the issue of developers using vim
having causing different indentation.
"John (Warthog9) Hawley" <warthog9@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Emacs by default will have perl files have 4 space indents, where 8 spaces
are represented with a single tab. There are some places in
recordmcount.pl that has 8 spaces where a tab should be used. Replace them
to make the file consistent.
No functional changes.
Cc: "John (Warthog9) Hawley" <warthog9@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
