IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Document the compatible string for BCM43430A0 bluetooth used in lg-lenok
and BCM43430A1 used in asus-sparrow.
Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
CYW4373A0 is a Wi-Fi + Bluetooth combo device from Cypress.
This chip is present e.g. on muRata 2AE module. Extend the
binding with its DT compatible.
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Add conditional constraint to make property "reset-gpios" available only
for compatible devices acually having the reset pin.
Make property "brcm,requires-autobaud-mode" depend on property
"shutdown-gpios" as the shutdown pin is required to enter autobaud mode.
I looked at all compatible devices and compiled the matrix below before
formulating the conditional constraint. This was a pure paper exercise and
no verification testing has been performed.
d
e
v h
i o
c s
s e t
h - -
u w w v
t r a a v d
d e k k b d
o s e e a i
w e u u t o
n t p p - -
- - - - s s
g g g g u u
p p p p t p p
i i i i x l p p
o o o o c p l l
s s s s o o y y
---------------------------------------
brcm,bcm20702a1 X X X X X X X X
brcm,bcm4329-bt X X X X X X X X
brcm,bcm4330-bt X X X X X X X X
brcm,bcm4334-bt X - X X X X X X
brcm,bcm43438-bt X - X X X X X X
brcm,bcm4345c5 X - X X X X X X
brcm,bcm43540-bt X - X X X X X X
brcm,bcm4335a0 X - X X X X X X
brcm,bcm4349-bt X - X X X X X X
infineon,cyw55572-bt X - X X X X X X
Signed-off-by: Hakan Jansson <hakan.jansson@infineon.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
CYW55572 is a Wi-Fi + Bluetooth combo device from Infineon.
Extend the binding with its DT compatible.
Signed-off-by: Hakan Jansson <hakan.jansson@infineon.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The BCM4349B1, aka CYW/BCM89359, is a WiFi+BT chip and its Bluetooth
portion can be controlled over serial.
Extend the binding with its DT compatible.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Add property, "brcm,requires-autobaud-mode", to enable autobaud mode
selection.
Some devices (e.g. CYW5557x) require autobaud mode to enable FW loading.
Autobaud mode can also be required on some boards where the controller
device is using a non-standard baud rate when first powered on.
Signed-off-by: Hakan Jansson <hakan.jansson@infineon.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
The original binding was mentioning that valid values for the clocks and
clock-names property were one or two clocks from extclk, txco and lpo,
with extclk being deprecated in favor of txco.
However, the current binding lists a valid array as extclk, txco and
lpo, with either one or two items.
While this looks similar, it actually enforces that all the device trees
use either ["extclk"], or ["extclk", "txco"]. That doesn't make much
sense, since the two clocks are said to be equivalent, with one
superseeding the other.
lpo is also not a valid clock anymore, and would be as the third clock
of the list, while we could have only this clock in the previous binding
(and in DTs).
Let's rework the clock clause to allow to have either:
- extclk, and mark it a deprecated
- txco alone
- lpo alone
- txco, lpo
While ["extclk", "lpo"] wouldn't be valid, it wasn't found in any device
tree so it's not an issue in practice.
Similarly, ["lpo", "txco"] is still considered invalid, but it's
generally considered as a best practice to fix the order of clocks.
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: netdev@vger.kernel.org
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210924072756.869731-1-maxime@cerno.tech
This rewrites the Broadcom bluetooth bindings in YAML and
adds a GPIO handle for the BT_RST_N line as used on some
platforms.
The Ingenic UART binding was using this binding in its
example DTS fragment, however mistakenly using "vcc-supply"
for what is called "vbat-supply". The proper DTS files
and the code in the kernel all use "vbat-supply" so
fix up the example in this patch so we ge a clean
check.
Cc: devicetree@vger.kernel.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
