IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Create a common crypt function for each skcipher/aead/gcm/chachapoly
algorithms and call it for encrypt/decrypt with the specific boolean -
true for encrypt and false for decrypt.
Signed-off-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Reviewed-by: Horia Geanta <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The CRYPTO_TFM_RES_BAD_KEY_LEN flag was apparently meant as a way to
make the ->setkey() functions provide more information about errors.
However, no one actually checks for this flag, which makes it pointless.
Also, many algorithms fail to set this flag when given a bad length key.
Reviewing just the generic implementations, this is the case for
aes-fixed-time, cbcmac, echainiv, nhpoly1305, pcrypt, rfc3686, rfc4309,
rfc7539, rfc7539esp, salsa20, seqiv, and xcbc. But there are probably
many more in arch/*/crypto/ and drivers/crypto/.
Some algorithms can even set this flag when the key is the correct
length. For example, authenc and authencesn set it when the key payload
is malformed in any way (not just a bad length), the atmel-sha and ccree
drivers can set it if a memory allocation fails, and the chelsio driver
sets it for bad auth tag lengths, not just bad key lengths.
So even if someone actually wanted to start checking this flag (which
seems unlikely, since it's been unused for a long time), there would be
a lot of work needed to get it working correctly. But it would probably
be much better to go back to the drawing board and just define different
return values, like -EINVAL if the key is invalid for the algorithm vs.
-EKEYREJECTED if the key was rejected by a policy like "no weak keys".
That would be much simpler, less error-prone, and easier to test.
So just remove this flag.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
In order to be able to configure CAAM pointer size at run-time, which
needed to support i.MX8MQ, which is 64-bit SoC with 32-bit pointer
size, convert CAAM_PTR_SZ to refer to a global variable of the same
name ("caam_ptr_sz") and adjust the rest of the code accordingly. No
functional change intended.
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Cc: Chris Spencer <christopher.spencer@sea.co.uk>
Cc: Cory Tusar <cory.tusar@zii.aero>
Cc: Chris Healy <cphealy@gmail.com>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Horia Geantă <horia.geanta@nxp.com>
Cc: Aymen Sghaier <aymen.sghaier@nxp.com>
Cc: Leonard Crestez <leonard.crestez@nxp.com>
Cc: linux-crypto@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Fuzz testing uncovered an issue when |user key| > |derived key|.
Derived key generation has to be fixed in two cases:
1. Era >= 6 (DKP is available)
DKP cannot be used with immediate input key if |user key| > |derived key|,
since the resulting descriptor (after DKP execution) would be invalid -
having a few bytes from user key left in descriptor buffer
as incorrect opcodes.
Fix DKP usage both in standalone hmac and in authenc algorithms.
For authenc the logic is simplified, by always storing both virtual
and dma key addresses.
2. Era < 6
The same case (|user key| > |derived key|) fails when DKP
is not available.
Make sure gen_split_key() dma maps max(|user key|, |derived key|),
since this is an in-place (bidirectional) operation.
Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
Reviewed-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Check zero-length input, for skcipher algorithm, to solve the extra
tests. This is a valid operation, therefore the API will return no error.
Signed-off-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Reviewed-by: Horia Geanta <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Check assoclen to solve the extra tests that expect -EINVAL to be
returned when the associated data size is not valid.
Validated assoclen for RFC4106 and RFC4543 which expects an assoclen
of 16 or 20.
Based on seqiv, IPsec ESP and RFC4543/RFC4106 the assoclen is sizeof IP
Header (spi, seq_no, extended seq_no) and IV len. This can be 16 or 20
bytes.
Signed-off-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Reviewed-by: Horia Geanta <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Check authsize to solve the extra tests that expect -EINVAL to be
returned when the authentication tag size is not valid.
Validated authsize for GCM, RFC4106 and RFC4543.
Signed-off-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Reviewed-by: Horia Geanta <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Check key length to solve the extra tests that expect -EINVAL to be
returned when the key size is not valid.
Validated AES keylen for skcipher, ahash and aead.
Signed-off-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Reviewed-by: Horia Geanta <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
skcipher encryption might fail and in some cases, like (invalid) input
length smaller then block size, updating the IV would lead to a useless
IV copy in case hardware issued an error.
Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Modify drive to provide a valid errno (and not the HW error ID)
to the user, via completion callbacks.
A "valid errno" is currently not explicitly mentioned in the docs,
however the error code is expected to match the one returned by the
generic SW implementation.
Note: in most error cases caam/qi and caam/qi2 returned -EIO; align all
caam drivers to return -EINVAL.
While here, ratelimit prints triggered by fuzz testing, such that
console is not flooded.
Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Modify drivers to perform skcipher IV update using the crypto engine,
instead of performing the operation in SW.
Besides being more efficient, this also fixes IV update for CTR mode.
Output HW S/G table is appended with an entry pointing to the same
IV buffer used as input (which is now mapped BIDIRECTIONAL).
AS (Algorithm State) parameter of the OPERATION command is changed
from INIFINAL to INIT in descriptors used by ctr(aes), cbc(aes).
This is needed since in case FINAL bit is set, HW skips IV updating
in the Context Register for the last data block.
Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Currently, conversion of SW S/G table into HW S/G layout relies on
nents returned by sg_nents_for_len(sg, len).
However this leaves the possibility of HW S/G referencing more data
then needed: since buffer length in HW S/G entries is filled using
sg_dma_len(sg), the last entry in HW S/G table might have a length
that is bigger than needed for the crypto request.
This way of S/G table conversion is fine, unless after converting a table
more entries have to be appended to the HW S/G table.
In this case, crypto engine would access data from the S/G entry having
the incorrect length, instead of advancing in the S/G table.
This situation doesn't exist, but the upcoming implementation of
IV update for skcipher algorithms needs to add a S/G entry after
req->dst S/G (corresponding to output IV).
Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The CAAM driver currently violates an undocumented and slightly
controversial requirement imposed by the crypto stack that a buffer
referred to by the request structure via its virtual address may not
be modified while any scatterlists passed via the same request
structure are mapped for inbound DMA.
This may result in errors like
alg: aead: decryption failed on test 1 for gcm_base(ctr-aes-caam,ghash-generic): ret=74
alg: aead: Failed to load transform for gcm(aes): -2
on non-cache coherent systems, due to the fact that the GCM driver
passes an IV buffer by virtual address which shares a cacheline with
the auth_tag buffer passed via a scatterlist, resulting in corruption
of the auth_tag when the IV is updated while the DMA mapping is live.
Since the IV that is returned to the caller is only valid for CBC mode,
and given that the in-kernel users of CBC (such as CTS) don't trigger the
same issue as the GCM driver, let's just disable the output IV generation
for all modes except CBC for the time being.
Fixes: 854b06f768 ("crypto: caam - properly set IV after {en,de}crypt")
Cc: Horia Geanta <horia.geanta@nxp.com>
Cc: Iuliana Prodan <iuliana.prodan@nxp.com>
Reported-by: Sascha Hauer <s.hauer@pengutronix.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Horia Geanta <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
caam_dump_sg() is only compiled in when DEBUG is defined, hence the
messages are debug messages. Remove the @level argument from
caam_dump_sg() and print all messages at debug level.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The CAAM driver used to put its debug messages inside #ifdef DEBUG and
then prints the messages at KERN_ERR level. Replace this with proper
functions printing at KERN_DEBUG level. The #ifdef DEBUG gets
unnecessary when the right functions are used.
This replaces:
- print_hex_dump(KERN_ERR ...) inside #ifdef DEBUG with
print_hex_dump_debug(...)
- dev_err() inside #ifdef DEBUG with dev_dbg()
- printk(KERN_ERR ...) inside #ifdef DEBUG with dev_dbg()
Some parts of the driver use these functions already, so it is only
consequent to use the debug function consistently.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The CAAM driver defines its own debug() macro, but it is unused. Remove
it.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Reviewed-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Since eaed71a44a ("crypto: caam - add ecb(*) support") the IV can be
NULL, so only dump it when it's non NULL as designated by the ivsize
variable.
Fixes: eaed71a44a ("crypto: caam - add ecb(*) support")
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
For encryption the destination pointer was still mapped, so the hex dump
may be wrong. The IV still contained the input IV while printing instead
of the output IV as intended.
For decryption the destination pointer was still mapped, so the hex dump
may be wrong. The IV dump was correct.
Do the hex dumps consistenly after the buffers have been unmapped and
in case of IV copied to their final destination.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Reviewed-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Currently we allow top level code, i.e. that which sits between the
low level (HW-specific) drivers and crypto API, to be built as several
drivers: caamalg, caamhash, caam_pkc, caamrng, caamalg_qi.
There is no advantage in this, more it interferes with adding support
for deferred probing (there are no corresponding devices and thus
no bus).
Convert these drivers and call init() / exit() manually at the right
time.
Move algorithms initialization at JR probe / remove time:
-the first probed JR registers the crypto algs
-the last removed JR unregisters the crypto algs
Note: caam_qi_init() is called before JR platform devices creation
(of_populate_bus()), such that QI interface is initialized when
the caam/qi algorithms are registered in the JR driver (by calling
caam_qi_algapi_init().
While here, fix the Kconfig entries under CRYPTO_DEV_FSL_CAAM_JR
to be aligned.
Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
According to CAAM RM:
-crypto engine reads 4 S/G entries (64 bytes) at a time,
even if the S/G table has fewer entries
-it's the responsibility of the user / programmer to make sure
this HW behaviour has no side effect
The drivers do not take care of this currently, leading to IOMMU faults
when the S/G table ends close to a page boundary - since only one page
is DMA mapped, while CAAM's DMA engine accesses two pages.
Fix this by rounding up the number of allocated S/G table entries
to a multiple of 4.
Note that in case of two *contiguous* S/G tables, only the last table
might needs extra entries.
Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
When enabling IOMMU support, the following issue becomes visible
in the AEAD zero-length case.
Even though the output sequence length is set to zero, the crypto engine
tries to prefetch 4 S/G table entries (since SGF bit is set
in SEQ OUT PTR command - which is either generated in SW in case of
caam/jr or in HW in case of caam/qi, caam/qi2).
The DMA read operation will trigger an IOMMU fault since the address in
the SEQ OUT PTR is "dummy" (set to zero / not obtained via DMA API
mapping).
1. In case of caam/jr, avoid the IOMMU fault by clearing the SGF bit
in SEQ OUT PTR command.
2. In case of caam/qi - setting address, bpid, length to zero for output
entry in the compound frame has a special meaning (cf. CAAM RM):
"Output frame = Unspecified, Input address = Y. A unspecified frame is
indicated by an unused SGT entry (an entry in which the Address, Length,
and BPID fields are all zero). SEC obtains output buffers from BMan as
prescribed by the preheader."
Since no output buffers are needed, modify the preheader by setting
(ABS = 1, ADDBUF = 0):
-"ABS = 1 means obtain the number of buffers in ADDBUF (0 or 1) from
the pool POOL ID"
-ADDBUF: "If ABS is set, ADD BUF specifies whether to allocate
a buffer or not"
3. In case of caam/qi2, since engine:
-does not support FLE[FMT]=2'b11 ("unused" entry) mentioned in DPAA2 RM
-requires output entry to be present, even if not used
the solution chosen is to leave output frame list entry zeroized.
Fixes: 763069ba49 ("crypto: caam - handle zero-length AEAD output")
Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The detection for DKP (Derived Key Protocol) relied on the value
of the setkey function. This was broken by the recent change which
added des3_aead_setkey.
This patch fixes this by introducing a new flag for DKP and setting
that where needed.
Fixes: 1b52c40919 ("crypto: caam - Forbid 2-key 3DES in FIPS mode")
Reported-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Tested-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
GCM detection logic has to change for two reasons:
-some CAAM instantiations with Era < 10, even though they have AES LP,
they now support GCM mode
-Era 10 upwards, there is a dedicated bit in AESA_VERSION[AESA_MISC]
field for GCM support
For Era 9 and earlier, all AES accelerator versions support GCM,
except for AES LP (CHAVID_LS[AESVID]=3) with revision CRNR[AESRN] < 8.
For Era 10 and later, bit 9 of the AESA_VERSION register should be used
to detect GCM support in AES accelerator.
Note: caam/qi and caam/qi2 are drivers for QI (Queue Interface), which
is used in DPAA-based SoCs; for now, we rely on CAAM having an AES HP
and this AES accelerator having support for GCM.
Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
Reviewed-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch forbids the use of 2-key 3DES (K1 == K3) in FIPS mode.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Reviewed-by: Horia Geantă <horia.geanta@nxp.com>
Tested-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The of_find_device_by_node() takes a reference to the underlying device
structure, we should release that reference.
Fixes: 35af640386 ("crypto: caam - Check for CAAM block presence before registering with crypto layer")
Fixes: b189817cf7 ("crypto: caam/qi - add ablkcipher and authenc algorithms")
Reviewed-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Wen Yang <yellowriver2010@hotmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Modify setkey callback for cbc des and 3des to check for weak keys.
Signed-off-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Reviewed-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add ecb mode support for aes, des, 3des and arc4 ciphers.
ecb(*) reuses existing skcipher implementation, updating it with support
for no IV.
Signed-off-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Reviewed-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The mapped_{src,dst}_nents _returned_ from the dma_map_sg call (which
could be less than src/dst_nents) have to be used to generate the aead,
skcipher job descriptors.
Signed-off-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Reviewed-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
when the source sg contains more than 1 fragment and
destination sg contains 1 fragment, the caam driver
mishandle the buffers to be sent to caam.
Fixes: f2147b88b2 ("crypto: caam - Convert GCM to new AEAD interface")
Cc: <stable@vger.kernel.org> # 4.2+
Signed-off-by: Pankaj Gupta <pankaj.gupta@nxp.com>
Signed-off-by: Arun Pathak <arun.pathak@nxp.com>
Reviewed-by: Horia Geanta <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Recent AEAD changes in testmgr framework introduced by commit
a0d608ee5e ("crypto: testmgr - unify the AEAD encryption and decryption test vectors")
uncovered an error in the CAAM drivers, since they don't correctly
handle the case when AEAD output length is zero.
Add checks to avoid feeding zero-length req->dst to DMA API.
Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The addition of Chacha20 + Poly1305 authenc support inadvertently broke
detection of algorithms supported by MDHA (Message Digest Hardware
Accelerator), fix it.
Fixes: d6bbd4eea2 ("crypto: caam/jr - add support for Chacha20 + Poly1305")
Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
In preparation for adding XChaCha12 support, rename/refactor
chacha20-generic to support different numbers of rounds. The
justification for needing XChaCha12 support is explained in more detail
in the patch "crypto: chacha - add XChaCha12 support".
The only difference between ChaCha{8,12,20} are the number of rounds
itself; all other parts of the algorithm are the same. Therefore,
remove the "20" from all definitions, structures, functions, files, etc.
that will be shared by all ChaCha versions.
Also make ->setkey() store the round count in the chacha_ctx (previously
chacha20_ctx). The generic code then passes the round count through to
chacha_block(). There will be a ->setkey() function for each explicitly
allowed round count; the encrypt/decrypt functions will be the same. I
decided not to do it the opposite way (same ->setkey() function for all
round counts, with different encrypt/decrypt functions) because that
would have required more boilerplate code in architecture-specific
implementations of ChaCha and XChaCha.
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Martin Willi <martin@strongswan.org>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add support for Chacha20 + Poly1305 combined AEAD:
-generic (rfc7539)
-IPsec (rfc7634 - known as rfc7539esp in the kernel)
Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add support for Chacha20 + Poly1305 combined AEAD:
-generic (rfc7539)
-IPsec (rfc7634 - known as rfc7539esp in the kernel)
Signed-off-by: Cristian Stoica <cristian.stoica@nxp.com>
Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Era 10 changes the register map.
The updates that affect the drivers:
-new version registers are added
-DBG_DBG[deco_state] field is moved to a new register -
DBG_EXEC[19:16] @ 8_0E3Ch.
Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Previously, a tree-wide change added SPDX license identifiers to
files lacking licensing information:
b24413180f ("License cleanup: add SPDX GPL-2.0 license identifier to files with no license")
To be consistent update the rest of the files:
-files with license specified by means of MODULE_LICENSE()
-files with complete license text
-Kconfig
Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
In some cases the zero-length hw_desc array at the end of
ablkcipher_edesc struct requires for 4B of tail padding.
Due to tail padding and the way pointers to S/G table and IV
are computed:
edesc->sec4_sg = (void *)edesc + sizeof(struct ablkcipher_edesc) +
desc_bytes;
iv = (u8 *)edesc->hw_desc + desc_bytes + sec4_sg_bytes;
first 4 bytes of IV are overwritten by S/G table.
Update computation of pointer to S/G table to rely on offset of hw_desc
member and not on sizeof() operator.
Cc: <stable@vger.kernel.org> # 4.13+
Fixes: 115957bb3e ("crypto: caam - fix IV DMA mapping and updating")
Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
There are two IV-related issues:
(1) crypto API does not guarantee to provide an IV buffer that is DMAable,
thus it's incorrect to DMA map it
(2) for in-place decryption, since ciphertext is overwritten with
plaintext, updated req->info will contain the last block of plaintext
(instead of the last block of ciphertext)
While these two issues could be fixed separately, it's straightforward
to fix both in the same time - by allocating extra space in the
ablkcipher_edesc for the IV that will be fed to the crypto engine;
this allows for fixing (2) by saving req->src[last_block] in req->info
directly, i.e. without allocating another temporary buffer.
A side effect of the fix is that it's no longer possible to have the IV
and req->src contiguous. Code checking for this case is removed.
Cc: <stable@vger.kernel.org> # 4.13+
Fixes: 854b06f768 ("crypto: caam - properly set IV after {en,de}crypt")
Link: http://lkml.kernel.org/r/20170113084620.GF22022@gondor.apana.org.au
Reported-by: Gilad Ben-Yossef <gilad@benyossef.com>
Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
In case of GIVCIPHER, IV is generated by the device.
Fix the DMA mapping direction.
Cc: <stable@vger.kernel.org> # 3.19+
Fixes: 7222d1a341 ("crypto: caam - add support for givencrypt cbc(aes) and rfc3686(ctr(aes))")
Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
In caam's aead_setkey we save pointers to the authenc keys in a
local variable of type struct crypto_authenc_keys and we don't
zeroize it after use. Fix this and don't leak pointers to the
authenc keys.
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Reviewed-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Update gcm(aes) descriptors (generic, rfc4106 and rfc4543) such that
they would also work when submitted via the QI interface.
Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Offload split key generation in CAAM engine, using DKP.
DKP is supported starting with Era 6.
Note that the way assoclen is transmitted from the job descriptor
to the shared descriptor changes - DPOVRD register is used instead
of MATH3 (where available), since DKP protocol thrashes the MATH
registers.
The replacement of MDHA split key generation with DKP has the side
effect of the crypto engine writing the authentication key, and thus
the DMA mapping direction for the buffer holding the key has to change
from DMA_TO_DEVICE to DMA_BIDIRECTIONAL.
There are two cases:
-key is inlined in descriptor - descriptor buffer mapping changes
-key is referenced - key buffer mapping changes
Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
ablkcipher shared descriptors are relatively small, thus there is enough
space for the key to be inlined.
Accordingly, there is no need to copy the key in ctx->key.
Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch replace GCM IV size value by their constant name.
Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
caam/qi driver does not compile when DEBUG is enabled
(CRYPTO_DEV_FSL_CAAM_DEBUG=y):
drivers/crypto/caam/caamalg_qi.c: In function 'ablkcipher_done':
drivers/crypto/caam/caamalg_qi.c:794:2: error: implicit declaration of function 'dbg_dump_sg' [-Werror=implicit-function-declaration]
dbg_dump_sg(KERN_ERR, "dst @" __stringify(__LINE__)": ",
Since dbg_dump_sg() is shared between caam/jr and caam/qi, move it
in a shared location and export it.
At the same time:
-reduce ifdeferry by providing a no-op implementation for !DEBUG case
-rename it to caam_dump_sg() to be consistent in terms of
exported symbols namespace (caam_*)
Cc: <stable@vger.kernel.org>
Fixes: b189817cf7 ("crypto: caam/qi - add ablkcipher and authenc algorithms")
Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
