IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Split out a new file for bch_sb_field_members - we'll likely want to
move more code here in the future.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
We need to always call bch2_replicas_gc_end() after we've called
bch2_replicas_gc_start(), else we leave state around that needs to be
cleaned up.
Partial fix for: https://github.com/koverstreet/bcachefs/issues/560
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
- endianness fixes
- mark some things static
- fix a few __percpu annotations
- fix silent enum conversions
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
A simple device evacuate, remove, add test loop with concurrent
shutdowns occasionally reproduces a problem where the filesystem
fails to mount. The mount failure occurs because the filesystem was
uncleanly shut down, yet no member device is marked for journal data
in the superblock. An fsck detects the problem, restores the mark
and allows the mount to proceed without further consistency issues.
The reason for the lack of journal data marks is the gc mechanism
invoked via bch2_journal_flush_device_pins() runs while the journal
happens to be empty. This results in garbage collection of all journal
replicas entries. Once the updated replicas table is written to the
superblock, the filesystem is put in a transiently unrecoverable state
until further journal data is written, because journal recovery expects
to find at least one marked journal device whenever the filesystem is
not otherwise marked clean (i.e. as on clean unmount).
To fix this problem, update the journal replicas gc algorithm to always
mark currently active journal replicas entries by writing to the
journal. This ensures that only entries for devices that are no longer
used for journaling are garbage collected, not just those that don't
happen to currently hold journal data. This preserves the journal
recovery invariant above and avoids putting the fs into a transiently
unrecoverable state.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
GFP_NOIO dates from the bcache days, when we operated under the block
layer. Now, GFP_NOFS is more appropriate, so switch all GFP_NOIO uses to
GFP_NOFS.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
The journal stucking check in bch2_journal_space_available() is
particularly aggressive and can lead to premature shutdown in some
rare cases. This is difficult to reproduce, but also comes along
with a fatal error and so is worthwhile to be cautious.
For example, we've seen instances where the journal is under heavy
reservation pressure, the journal allocation path transitions into
the final available journal bucket, the journal write path
immediately consumes that bucket and calls into
bch2_journal_space_available(), which then in turn flags the journal
as stuck because there is no available space and shuts down the
filesystem instead of submitting the journal write (that would have
otherwise succeeded).
To avoid this problem, simplify the journal stuck checking by just
relying on the higher level logic in the journal reservation path.
This produces more useful debug output and is a more reliable
indicator that things have bogged down.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Tweak journal reclaim to ensure the btree node cache isn't more
than half dirty so that memory reclaim can always make progress - the
same as we do for the btree key cache.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
It's now legal for the pin fifo to be empty, which means this code needs
to be updated in order to not hit an assert.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
checkpatch.pl gives lots of warnings that we don't want - suggested
ignore list:
ASSIGN_IN_IF
UNSPECIFIED_INT - bcachefs coding style prefers single token type names
NEW_TYPEDEFS - typedefs are occasionally good
FUNCTION_ARGUMENTS - we prefer to look at functions in .c files
(hopefully with docbook documentation), not .h
file prototypes
MULTISTATEMENT_MACRO_USE_DO_WHILE
- we have _many_ x-macros and other macros where
we can't do this
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Also, do some reorganizing/renaming, convert atomic counters in bch_fs
to persistent counters, and add a few missing counters.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Delete some obsolete tracepoints, organize alloc tracepoints better,
make a few tracepoints more consistent.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Since journal reclaim -> btree key cache flushing may require the
allocation of new btree nodes, it has an implicit dependency on copygc
in order to make forward progress - so we should avoid blocking copygc
unless the journal is really close to full.
This introduces watermarks to replace our single MAY_GET_UNRESERVED bit
in the journal, and adds a watermark for copygc and plumbs it through.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
When bch2_journal_pin_set() is updating an existing pin, we shouldn't
call bch2_journal_reclaim_fast() after dropping the old pin and before
dropping the new pin - that could reclaim the entry we're trying to pin.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
bch2_journal_space_available -> bch2_journal_halt() self deadlocks on
journal lock; work around this by dropping/retaking journal lock before
we call bch2_fatal_error().
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
It makes the code more readable if we work off of sequence numbers,
instead of direct indexes into the array of journal buffers.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
This patch changes journal_entry_open() to initialize the new journal
entry, not __journal_entry_close().
This also means that journal_cur_seq() refers to the sequence number of
the last journal entry when we don't have an open journal entry, not the
next one.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
journal_flush_done() was overwriting did_work, thus occasionally
returning false when it did do work and occasional assertions in the
shutdown sequence because we didn't completely flush the key cache.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
This patch changes printbufs dynamically allocate and reallocate a
buffer as needed. Stack usage has become a bit of a problem, and a major
cause of that has been static size string buffers on the stack.
The most involved part of this refactoring is that printbufs must now be
exited with printbuf_exit().
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
This patch was originally to work around the journal geting stuck in
nochanges mode - but that was just a hack, we needed to fix the actual
bug. It should be fixed now, so revert it.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
When the nochanges option is selected, we're supposed to never issue
writes. Unfortunately, it seems discards were missed when implemnting
this, leading to some painful filesystem corruption.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
With BTREE_ITER_WITH_JOURNAL, there's no longer any restrictions on the
order we have to replay keys from the journal in, and we can also start
up journal reclaim right away - and delete a bunch of code.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
This converts journal_write_delay, journal_flush_disabled, and
journal_reclaim_delay to normal filesystems options, and also adds them
to the superblock.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
This tweaks the journal code to always act as if there's space available
in nochanges mode, when we're not going to be doing any writes. This
helps in recovering filesystems that won't mount because they need
journal replay and the journal has gotten stuck.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Type size_t is architecture-specific. Fix warnings for some non-amd64
arches.
Signed-off-by: Brett Holman <bholman.devel@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
When devices have different bucket sizes, we may accumulate a journal
write that doesn't fit on some of our devices - previously, we'd
underflow when calculating space on that device and then everything
would get weird.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
If the journal reclaim thread makes it to the timeout without ever
initializing j->last_flushed, we could end up sleeping for a very long
time.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Flushing the btree key cache needs to use allocation reserves - journal
reclaim depends on flushing the btree key cache for making forward
progress, and the allocator and copygc depend on journal reclaim making
forward progress.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
When dirty key cache keys were separated from other journal pins, we
broke the loop conditional in __bch2_journal_reclaim() - it's supposed
to keep looping as long as there's work to do.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
We need to flush the btree key cache when it's too dirty, because
otherwise the shrinker won't be able to reclaim memory - this is done by
journal reclaim. But journal reclaim also kicks btree node writes: this
meant that btree node writes were getting kicked much too often just
because we needed to flush btree key cache keys.
This patch splits journal pins into two different lists, and teaches
journal reclaim to not flush btree node writes when it only needs to
flush key cache keys.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
JOURNAL_RES_GET_RESERVED should only be used for updatse that need to be
done to free up space in the journal. In particular, when we're flushing
keys from the key cache, if we're flushing them out of order we
shouldn't be using it, since we're using up our remaining space in the
journal without dropping a pin that will let us make forward progress.
With this patch, BTREE_INSERT_JOURNAL_RECLAIM without
BTREE_INSERT_JOURNAL_RESERVED may return -EAGAIN - we can't wait on
journal reclaim if we're already in journal reclaim.
This means we need to propagate these errors up to journal reclaim,
indicating that flushing a journal pin should be retried in the future.
This is prep work for a patch to change the way journal reclaim works,
to split out flushing key cache keys because the btree key cache is too
dirty from journal reclaim because we need space in the journal.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
This adds a new watermark for the journal reclaim when flushing btree
key cache entries - it should try and stay ahead of where foreground
threads doing transaction commits will enter direct journal reclaim.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
The btree key cache mutex was becoming a significant bottleneck - it was
mainly used to protect the lists of dirty, clean and freed cached keys.
This patch eliminates the dirty and clean lists - instead, when we need
to scan for keys to drop from the cache we iterate over the rhashtable,
and thus we're able to remove most uses of that lock.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
In bch2_btree_interior_update_will_free_node, we copy the journal pins
from outstanding writes on the btree node we're about to free. But, this
can race with the writes completing, and dropping their journal pins.
To guard against this, just use READ_ONCE() in bch2_journal_pin_copy().
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Without checking if we actually flushed anything, journal reclaim could
still go into an infinite loop while trying ot shut down.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Had a type that meant we were triggering journal reclaim _much_ more
aggressively than needed. Also, fix a potential integer overflow.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
- Try to always keep 1/8th of the journal free, on top of
pre-reservations
- Move the check for whether the journal is stuck to
bch2_journal_space_available, and make it only fire when there aren't
any journal writes in flight (that might free up space by updating
last_seq)
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
This patch adds a flag to journal entries which, if set, indicates that
they weren't done as flush/fua writes.
- non flush/fua journal writes don't update last_seq (i.e. they don't
free up space in the journal), thus the journal free space
calculations now check whether nonflush journal writes are currently
allowed (i.e. are we low on free space, or would doing a flush write
free up a lot of space in the journal)
- write_delay_ms, the user configurable option for when open journal
entries are automatically written, is now interpreted as the max
delay between flush journal writes (default 1 second).
- bch2_journal_flush_seq_async is changed to ensure a flush write >=
the requested sequence number has happened
- journal read/replay must now ignore, and blacklist, any journal
entries newer than the most recent flush entry in the journal. Also,
the way the read_entire_journal option is handled has been improved;
struct journal_replay now has an entry, 'ignore', for entries that
were read but should not be used.
- assorted refactoring and improvements related to journal read in
journal_io.c and recovery.c
Previously, we'd have to issue a flush/fua write every time we
accumulated a full journal entry - typically the bucket size. Now we
need to issue them much less frequently: when an fsync is requested, or
it's been more than write_delay_ms since the last flush, or when we need
to free up space in the journal. This is a significant performance
improvement on many write heavy workloads.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
This patch increases the maximum journal buffers in flight from 2 to 4 -
this will be particularly helpful when in the future we stop requiring
flush+fua for every journal write.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
If the journal is halted, journal reclaim won't necessarily be able to
make any forward progress, and won't accomplish anything anyways - we
should bail out so that we don't get stuck looping in reclaim when the
caches are too dirty and we should be shutting down.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
This deletes some duplicated code.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
