Commit Graph

79 Commits

Author SHA1 Message Date
Len Brown
40e2d7f9b5 x86 idle: Repair large-server 50-watt idle-power regression
Linux 3.10 changed the timing of how thread_info->flags is touched:

	x86: Use generic idle loop
	(7d1a941731)

This caused Intel NHM-EX and WSM-EX servers to experience a large number
of immediate MONITOR/MWAIT break wakeups, which caused cpuidle to demote
from deep C-states to shallow C-states, which caused these platforms
to experience a significant increase in idle power.

Note that this issue was already present before the commit above,
however, it wasn't seen often enough to be noticed in power measurements.

Here we extend an errata workaround from the Core2 EX "Dunnington"
to extend to NHM-EX and WSM-EX, to prevent these immediate
returns from MWAIT, reducing idle power on these platforms.

While only acpi_idle ran on Dunnington, intel_idle
may also run on these two newer systems.
As of today, there are no other models that are known
to need this tweak.

Link: http://lkml.kernel.org/r/CAJvTdK=%2BaNN66mYpCGgbHGCHhYQAKx-vB0kJSWjVpsNb_hOAtQ@mail.gmail.com
Signed-off-by: Len Brown <len.brown@intel.com>
Link: http://lkml.kernel.org/r/baff264285f6e585df757d58b17788feabc68918.1387403066.git.len.brown@intel.com
Cc: <stable@vger.kernel.org> # 3.12.x, 3.11.x, 3.10.x
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2013-12-19 11:47:39 -08:00
Bockholdt Arne
22e580d07f intel_idle: Fixed C6 state on Avoton/Rangeley processors
Corrected the MWAIT flag for C-State C6 on Intel Avoton/Rangeley processors.

Signed-off-by: Arne Bockholdt <linux-kernel@bockholdt.com>
Acked-by: Len Brown <len.brown@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-11-28 14:35:26 +01:00
Rafael J. Wysocki
077a671d7b Merge branch 'pm-cpuidle'
* pm-cpuidle:
  intel_idle: Support Intel Atom Processor C2000 Product Family
2013-11-19 01:06:28 +01:00
Linus Torvalds
f9300eaaac ACPI and power management updates for 3.13-rc1
- New power capping framework and the the Intel Running Average Power
    Limit (RAPL) driver using it from Srinivas Pandruvada and Jacob Pan.
 
  - Addition of the in-kernel switching feature to the arm_big_little
    cpufreq driver from Viresh Kumar and Nicolas Pitre.
 
  - cpufreq support for iMac G5 from Aaro Koskinen.
 
  - Baytrail processors support for intel_pstate from Dirk Brandewie.
 
  - cpufreq support for Midway/ECX-2000 from Mark Langsdorf.
 
  - ARM vexpress/TC2 cpufreq support from Sudeep KarkadaNagesha.
 
  - ACPI power management support for the I2C and SPI bus types from
    Mika Westerberg and Lv Zheng.
 
  - cpufreq core fixes and cleanups from Viresh Kumar, Srivatsa S Bhat,
    Stratos Karafotis, Xiaoguang Chen, Lan Tianyu.
 
  - cpufreq drivers updates (mostly fixes and cleanups) from Viresh Kumar,
    Aaro Koskinen, Jungseok Lee, Sudeep KarkadaNagesha, Lukasz Majewski,
    Manish Badarkhe, Hans-Christian Egtvedt, Evgeny Kapaev.
 
  - intel_pstate updates from Dirk Brandewie and Adrian Huang.
 
  - ACPICA update to version 20130927 includig fixes and cleanups and
    some reduction of divergences between the ACPICA code in the kernel
    and ACPICA upstream in order to improve the automatic ACPICA patch
    generation process.  From Bob Moore, Lv Zheng, Tomasz Nowicki,
    Naresh Bhat, Bjorn Helgaas, David E Box.
 
  - ACPI IPMI driver fixes and cleanups from Lv Zheng.
 
  - ACPI hotplug fixes and cleanups from Bjorn Helgaas, Toshi Kani,
    Zhang Yanfei, Rafael J Wysocki.
 
  - Conversion of the ACPI AC driver to the platform bus type and
    multiple driver fixes and cleanups related to ACPI from Zhang Rui.
 
  - ACPI processor driver fixes and cleanups from Hanjun Guo, Jiang Liu,
    Bartlomiej Zolnierkiewicz, Mathieu Rhéaume, Rafael J Wysocki.
 
  - Fixes and cleanups and new blacklist entries related to the ACPI
    video support from Aaron Lu, Felipe Contreras, Lennart Poettering,
    Kirill Tkhai.
 
  - cpuidle core cleanups from Viresh Kumar and Lorenzo Pieralisi.
 
  - cpuidle drivers fixes and cleanups from Daniel Lezcano, Jingoo Han,
    Bartlomiej Zolnierkiewicz, Prarit Bhargava.
 
  - devfreq updates from Sachin Kamat, Dan Carpenter, Manish Badarkhe.
 
  - Operation Performance Points (OPP) core updates from Nishanth Menon.
 
  - Runtime power management core fix from Rafael J Wysocki and update
    from Ulf Hansson.
 
  - Hibernation fixes from Aaron Lu and Rafael J Wysocki.
 
  - Device suspend/resume lockup detection mechanism from Benoit Goby.
 
  - Removal of unused proc directories created for various ACPI drivers
    from Lan Tianyu.
 
  - ACPI LPSS driver fix and new device IDs for the ACPI platform scan
    handler from Heikki Krogerus and Jarkko Nikula.
 
  - New ACPI _OSI blacklist entry for Toshiba NB100 from Levente Kurusa.
 
  - Assorted fixes and cleanups related to ACPI from Andy Shevchenko,
    Al Stone, Bartlomiej Zolnierkiewicz, Colin Ian King, Dan Carpenter,
    Felipe Contreras, Jianguo Wu, Lan Tianyu, Yinghai Lu, Mathias Krause,
    Liu Chuansheng.
 
  - Assorted PM fixes and cleanups from Andy Shevchenko, Thierry Reding,
    Jean-Christophe Plagniol-Villard.
 
 /
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.19 (GNU/Linux)
 
 iQIcBAABCAAGBQJSfPKLAAoJEILEb/54YlRxH6YQAJwDKi25RCZziFSIenXuqzC/
 c6JxoH/tSnDHJHhcTgqh7H7Raa+zmatMDf0m2oEv2Wjfx4Lt4BQK4iefhe/zY4lX
 yJ8uXDg+U8DYhDX2XwbwnFpd1M1k/A+s2gIHDTHHGnE0kDngXdd8RAFFktBmooTZ
 l5LBQvOrTlgX/ZfqI/MNmQ6lfY6kbCABGSHV1tUUsDA6Kkvk/LAUTOMSmptv1q22
 hcs6k55vR34qADPkUX5GghjmcYJv+gNtvbDEJUjcmCwVoPWouF415m7R5lJ8w3/M
 49Q8Tbu5HELWLwca64OorS8qh/P7sgUOf1BX5IDzHnJT+TGeDfvcYbMv2Z275/WZ
 /bqhuLuKBpsHQ2wvEeT+lYV3FlifKeTf1FBxER3ApjzI3GfpmVVQ+dpEu8e9hcTh
 ZTPGzziGtoIsHQ0unxb+zQOyt1PmIk+cU4IsKazs5U20zsVDMcKzPrb19Od49vMX
 gCHvRzNyOTqKWpE83Ss4NGOVPAG02AXiXi/BpuYBHKDy6fTH/liKiCw5xlCDEtmt
 lQrEbupKpc/dhCLo5ws6w7MZzjWJs2eSEQcNR4DlR++pxIpYOOeoPTXXrghgZt2X
 mmxZI2qsJ7GAvPzII8OBeF3CRO3fabZ6Nez+M+oEZjGe05ZtpB3ccw410HwieqBn
 dYpJFt/BHK189odhV9CM
 =JCxk
 -----END PGP SIGNATURE-----

Merge tag 'pm+acpi-3.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull ACPI and power management updates from Rafael J Wysocki:

 - New power capping framework and the the Intel Running Average Power
   Limit (RAPL) driver using it from Srinivas Pandruvada and Jacob Pan.

 - Addition of the in-kernel switching feature to the arm_big_little
   cpufreq driver from Viresh Kumar and Nicolas Pitre.

 - cpufreq support for iMac G5 from Aaro Koskinen.

 - Baytrail processors support for intel_pstate from Dirk Brandewie.

 - cpufreq support for Midway/ECX-2000 from Mark Langsdorf.

 - ARM vexpress/TC2 cpufreq support from Sudeep KarkadaNagesha.

 - ACPI power management support for the I2C and SPI bus types from Mika
   Westerberg and Lv Zheng.

 - cpufreq core fixes and cleanups from Viresh Kumar, Srivatsa S Bhat,
   Stratos Karafotis, Xiaoguang Chen, Lan Tianyu.

 - cpufreq drivers updates (mostly fixes and cleanups) from Viresh
   Kumar, Aaro Koskinen, Jungseok Lee, Sudeep KarkadaNagesha, Lukasz
   Majewski, Manish Badarkhe, Hans-Christian Egtvedt, Evgeny Kapaev.

 - intel_pstate updates from Dirk Brandewie and Adrian Huang.

 - ACPICA update to version 20130927 includig fixes and cleanups and
   some reduction of divergences between the ACPICA code in the kernel
   and ACPICA upstream in order to improve the automatic ACPICA patch
   generation process.  From Bob Moore, Lv Zheng, Tomasz Nowicki, Naresh
   Bhat, Bjorn Helgaas, David E Box.

 - ACPI IPMI driver fixes and cleanups from Lv Zheng.

 - ACPI hotplug fixes and cleanups from Bjorn Helgaas, Toshi Kani, Zhang
   Yanfei, Rafael J Wysocki.

 - Conversion of the ACPI AC driver to the platform bus type and
   multiple driver fixes and cleanups related to ACPI from Zhang Rui.

 - ACPI processor driver fixes and cleanups from Hanjun Guo, Jiang Liu,
   Bartlomiej Zolnierkiewicz, Mathieu Rhéaume, Rafael J Wysocki.

 - Fixes and cleanups and new blacklist entries related to the ACPI
   video support from Aaron Lu, Felipe Contreras, Lennart Poettering,
   Kirill Tkhai.

 - cpuidle core cleanups from Viresh Kumar and Lorenzo Pieralisi.

 - cpuidle drivers fixes and cleanups from Daniel Lezcano, Jingoo Han,
   Bartlomiej Zolnierkiewicz, Prarit Bhargava.

 - devfreq updates from Sachin Kamat, Dan Carpenter, Manish Badarkhe.

 - Operation Performance Points (OPP) core updates from Nishanth Menon.

 - Runtime power management core fix from Rafael J Wysocki and update
   from Ulf Hansson.

 - Hibernation fixes from Aaron Lu and Rafael J Wysocki.

 - Device suspend/resume lockup detection mechanism from Benoit Goby.

 - Removal of unused proc directories created for various ACPI drivers
   from Lan Tianyu.

 - ACPI LPSS driver fix and new device IDs for the ACPI platform scan
   handler from Heikki Krogerus and Jarkko Nikula.

 - New ACPI _OSI blacklist entry for Toshiba NB100 from Levente Kurusa.

 - Assorted fixes and cleanups related to ACPI from Andy Shevchenko, Al
   Stone, Bartlomiej Zolnierkiewicz, Colin Ian King, Dan Carpenter,
   Felipe Contreras, Jianguo Wu, Lan Tianyu, Yinghai Lu, Mathias Krause,
   Liu Chuansheng.

 - Assorted PM fixes and cleanups from Andy Shevchenko, Thierry Reding,
   Jean-Christophe Plagniol-Villard.

* tag 'pm+acpi-3.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (386 commits)
  cpufreq: conservative: fix requested_freq reduction issue
  ACPI / hotplug: Consolidate deferred execution of ACPI hotplug routines
  PM / runtime: Use pm_runtime_put_sync() in __device_release_driver()
  ACPI / event: remove unneeded NULL pointer check
  Revert "ACPI / video: Ignore BIOS initial backlight value for HP 250 G1"
  ACPI / video: Quirk initial backlight level 0
  ACPI / video: Fix initial level validity test
  intel_pstate: skip the driver if ACPI has power mgmt option
  PM / hibernate: Avoid overflow in hibernate_preallocate_memory()
  ACPI / hotplug: Do not execute "insert in progress" _OST
  ACPI / hotplug: Carry out PCI root eject directly
  ACPI / hotplug: Merge device hot-removal routines
  ACPI / hotplug: Make acpi_bus_hot_remove_device() internal
  ACPI / hotplug: Simplify device ejection routines
  ACPI / hotplug: Fix handle_root_bridge_removal()
  ACPI / hotplug: Refuse to hot-remove all objects with disabled hotplug
  ACPI / scan: Start matching drivers after trying scan handlers
  ACPI: Remove acpi_pci_slot_init() headers from internal.h
  ACPI / blacklist: fix name of ThinkPad Edge E530
  PowerCap: Fix build error with option -Werror=format-security
  ...

Conflicts:
	arch/arm/mach-omap2/opp.c
	drivers/Kconfig
	drivers/spi/spi.c
2013-11-14 13:41:48 +09:00
Len Brown
fab04b2208 intel_idle: Support Intel Atom Processor C2000 Product Family
Support the "Intel(R) Atom(TM) Processor C2000 Product Family",
formerly code-named Avoton.  It is based on the next generation
Intel Atom processor architecture, formerly code-named Silvermont.

Signed-off-by: Len Brown <len.brown@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-11-12 23:13:50 +01:00
Prarit Bhargava
e240145311 intel_idle: use CPU_TASKS_FROZEN instead of a numeric constant
Small fixup to use CPU_TASKS_FROZEN instead of 0xf.

Signed-off-by: Prarit Bhargava <prarit@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-10-30 01:25:07 +01:00
Peter Zijlstra
ea81174789 sched, idle: Fix the idle polling state logic
Mike reported that commit 7d1a9417 ("x86: Use generic idle loop")
regressed several workloads and caused excessive reschedule
interrupts.

The patch in question failed to notice that the x86 code had an
inverted sense of the polling state versus the new generic code (x86:
default polling, generic: default !polling).

Fix the two prominent x86 mwait based idle drivers and introduce a few
new generic polling helpers (fixing the wrong smp_mb__after_clear_bit
usage).

Also switch the idle routines to using tif_need_resched() which is an
immediate TIF_NEED_RESCHED test as opposed to need_resched which will
end up being slightly different.

Reported-by: Mike Galbraith <bitbucket@online.de>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Cc: lenb@kernel.org
Cc: tglx@linutronix.de
Link: http://lkml.kernel.org/n/tip-nc03imb0etuefmzybzj7sprf@git.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-09-25 13:53:10 +02:00
Bartlomiej Zolnierkiewicz
00f3e75551 intel_idle: mark some functions with __init tag
intel_idle_probe() and intel_idle_cpuidle_driver_init() can be marked
with __init tag as they are only called from intel_idle_init().

Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-09-24 01:42:58 +02:00
Bartlomiej Zolnierkiewicz
9d046ccb98 intel_idle: mark states tables with __initdata tag
States tables are only accessed during driver initialization so they
can be marked with __initdata tag.

Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-09-24 01:42:58 +02:00
Bartlomiej Zolnierkiewicz
eba682a5ae intel_idle: shrink states tables
There is no reason to define CPUIDLE_STATE_MAX (currently 10) entries
in states tables if the driver always stops iterating over table when
it encounters first .enter == NULL entry.

$ size drivers/idle/intel_idle.o.*
   text    data     bss     dec     hex filename
   2886    5440      32    8358    20a6 drivers/idle/intel_idle.o.before
   2886    3752      32    6670    1a0e drivers/idle/intel_idle.o.after

Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-09-24 01:42:58 +02:00
Linus Torvalds
ac4e01093f Merge branch 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux
Pull idle update from Len Brown:
 "Add support for new Haswell-ULT CPU idle power states"

* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux:
  intel_idle: initial C8, C9, C10 support
  tools/power turbostat: display C8, C9, C10 residency
2013-05-11 15:23:17 -07:00
Rafael J. Wysocki
e4f5a3adc4 Merge branch 'pm-cpuidle'
* pm-cpuidle: (51 commits)
  cpuidle: add maintainer entry
  ARM: s3c64xx: cpuidle: use init/exit common routine
  SH: cpuidle: use init/exit common routine
  cpuidle: fix comment format
  ARM: imx: cpuidle: use init/exit common routine
  ARM: davinci: cpuidle: use init/exit common routine
  ARM: kirkwood: cpuidle: use init/exit common routine
  ARM: calxeda: cpuidle: use init/exit common routine
  ARM: tegra: cpuidle: use init/exit common routine for tegra3
  ARM: tegra: cpuidle: use init/exit common routine for tegra2
  ARM: OMAP4: cpuidle: use init/exit common routine
  ARM: shmobile: cpuidle: use init/exit common routine
  ARM: tegra: cpuidle: use init/exit common routine
  ARM: OMAP3: cpuidle: use init/exit common routine
  ARM: at91: cpuidle: use init/exit common routine
  ARM: ux500: cpuidle: use init/exit common routine
  cpuidle: make a single register function for all
  ARM: ux500: cpuidle: replace for_each_online_cpu by for_each_possible_cpu
  cpuidle: remove en_core_tk_irqen flag
  ARM: OMAP3: remove cpuidle_wrap_enter
  ...
2013-04-28 01:54:49 +02:00
Daniel Lezcano
554c06ba3e cpuidle: remove en_core_tk_irqen flag
The en_core_tk_irqen flag is set in all the cpuidle driver which
means it is not necessary to specify this flag.

Remove the flag and the code related to it.

Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Kevin Hilman <khilman@linaro.org>  # for mach-omap2/*
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-04-23 13:45:22 +02:00
Daniel Lezcano
94b4624986 intel_idle: remove stop/start critical timings
The start/stop_critical_timings are called from arch/x86/kernel/process.c
in the cpu_idle loop function.

Remove the ones in the cpuidle driver.

Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Len Brown <len.brown@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-04-22 00:21:29 +02:00
Len Brown
86239ceb33 intel_idle: initial C8, C9, C10 support
Allow intel_idle and cpuidle to utilize C8, C9, C10
when they are present on...
"Fourth Generation Intel(R) Core(TM) Processors",
which are based on Intel(R) microarchitecture code name Haswell.

Signed-off-by: Len Brown <len.brown@intel.com>
2013-04-17 19:23:32 -04:00
Len Brown
0b15841b0b intel_idle: additional Haswell CPU-id
There is an additional HSW CPU-id, 0x46,
which has C-states exactly like CPU-id 0x45.

Signed-off-by: Len Brown <len.brown@intel.com>
2013-03-15 10:55:31 -04:00
Len Brown
32e9518005 intel_idle: export both C1 and C1E
Here we disable HW promotion of C1 to C1E
and export both C1 and C1E and distinct C-states.

This allows a cpuidle governor to choose a lower latency
C-state than C1E when necessary to satisfy performance
and QOS constraints -- and still save power versus polling.
This also corrects the erroneous latency previously reported
for C1E -- it is 10usec, not 1usec.

Note that if you use "intel_idle.max_cstate=N",
then you must increment N by 1 to get the same behavior
after this change.

Signed-off-by: Len Brown <len.brown@intel.com>
2013-02-13 18:22:08 -05:00
Len Brown
e022e7eb90 intel_idle: remove assumption of one C-state per MWAIT flag
Remove the assumption that cstate_tables are
indexed by MWAIT flag values.  Each entry
identifies itself via its own flags value.
This change is needed to support multiple states
that share the same MWAIT flags.

Note that this can have an effect on what state is described
by 'N' on cmdline intel_idle.max_cstate=N on some systems.

intel_idle.max_cstate=0 still disables the driver
intel_idle.max_cstate=1 still results in just C1(E)
However, "place holders" in the sparse C-state name-space
(eg. Atom) have been removed.

Signed-off-by: Len Brown <len.brown@intel.com>
2013-02-08 19:29:16 -05:00
Len Brown
137ecc779c intel_idle: remove use and definition of MWAIT_MAX_NUM_CSTATES
Cosmetic only.

Replace use of MWAIT_MAX_NUM_CSTATES with CPUIDLE_STATE_MAX.
They are both 8, so this patch has no functional change.

The reason to change is that intel_idle will soon be able
to export more than the 8 "major" states supported by MWAIT.
When we hit that limit, it is important to know
where the limit comes from.

Signed-off-by: Len Brown <len.brown@intel.com>
2013-02-08 19:28:10 -05:00
Len Brown
85a4d2d41d intel_idle: support Haswell
This patch enables intel_idle to run on the
next-generation Intel(R) Microarchitecture code named "Haswell".

Signed-off-by: Len Brown <len.brown@intel.com>
2013-02-08 19:25:48 -05:00
Len Brown
b1beab48f6 intel_idle: stop using driver_data for static flags
The commit, 4202735e8a
(cpuidle: Split cpuidle_state structure and move per-cpu statistics fields)
observed that the MWAIT flags for Cn on every processor to date were the
same, and created get_driver_data() to supply them.

Unfortunately, that assumption is false, going forward.
So here we restore the MWAIT flags to the cpuidle_state table.
However, instead restoring the old "driver_data" field,
we put the flags into the existing "flags" field,
where they probalby should have lived all along.

This patch does not change any operation.

This patch removes 1 of the 3 users of cpuidle_state_usage.driver_data.
Perhaps some day we'll get rid of the other 2.

Signed-off-by: Len Brown <len.brown@intel.com>
2013-02-01 16:16:22 -05:00
Konrad Rzeszutek Wilk
6f8c2e7933 intel_idle: Don't register CPU notifier if we are not running.
The 'intel_idle_probe' probes the CPU and sets the CPU notifier.
But if later on during the module initialization we fail (say
in cpuidle_register_driver), we stop loading, but we neglect
to unregister the CPU notifier.  This means that during CPU
hotplug events the system will fail:

calling  intel_idle_init+0x0/0x326 @ 1
intel_idle: MWAIT substates: 0x1120
intel_idle: v0.4 model 0x2A
intel_idle: lapic_timer_reliable_states 0xffffffff
intel_idle: intel_idle yielding to none
initcall intel_idle_init+0x0/0x326 returned -19 after 14 usecs

... some time later, offlining and onlining a CPU:

cpu 3 spinlock event irq 62
BUG: unable to ] __cpuidle_register_device+0x1c/0x120
PGD 99b8b067 PUD 99b95067 PMD 0
Oops: 0000 [#1] SMP
Modules linked in: xen_evtchn nouveau mxm_wmi wmi radeon ttm i915 fbcon tileblit font atl1c bitblit softcursor drm_kms_helper video xen_blkfront xen_netfront fb_sys_fops sysimgblt sysfillrect syscopyarea xenfs xen_privcmd mperf
CPU 0
Pid: 2302, comm: udevd Not tainted 3.8.0-rc3upstream-00249-g09ad159 #1 MSI MS-7680/H61M-P23 (MS-7680)
RIP: e030:[<ffffffff814d956c>]  [<ffffffff814d956c>] __cpuidle_register_device+0x1c/0x120
RSP: e02b:ffff88009dacfcb8  EFLAGS: 00010286
RAX: 0000000000000000 RBX: ffff880105380000 RCX: 000000000000001c
RDX: 0000000000000000 RSI: 0000000000000055 RDI: ffff880105380000
RBP: ffff88009dacfce8 R08: ffffffff81a4f048 R09: 0000000000000008
R10: 0000000000000008 R11: 0000000000000000 R12: ffff880105380000
R13: 00000000ffffffdd R14: 0000000000000000 R15: ffffffff81a523d0
FS:  00007f37bd83b7a0(0000) GS:ffff880105200000(0000) knlGS:0000000000000000
CS:  e033 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000008 CR3: 00000000a09ea000 CR4: 0000000000042660
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
Process udevd (pid: 2302, threadinfo ffff88009dace000, task ffff88009afb47f0)
Stack:
 ffffffff8107f2d0 ffffffff810c2fb7 ffff88009dacfce8 00000000ffffffea
 ffff880105380000 00000000ffffffdd ffff88009dacfd08 ffffffff814d9882
 0000000000000003 ffff880105380000 ffff88009dacfd28 ffffffff81340afd
Call Trace:
 [<ffffffff8107f2d0>] ? collect_cpu_info_local+0x30/0x30
 [<ffffffff810c2fb7>] ? __might_sleep+0xe7/0x100
 [<ffffffff814d9882>] cpuidle_register_device+0x32/0x70
 [<ffffffff81340afd>] intel_idle_cpu_init+0xad/0x110
 [<ffffffff81340bc8>] cpu_hotplug_notify+0x68/0x80
 [<ffffffff8166023d>] notifier_call_chain+0x4d/0x70
 [<ffffffff810bc369>] __raw_notifier_call_chain+0x9/0x10
 [<ffffffff81094a4b>] __cpu_notify+0x1b/0x30
 [<ffffffff81652cf7>] _cpu_up+0x103/0x14b
 [<ffffffff81652e18>] cpu_up+0xd9/0xec
 [<ffffffff8164a254>] store_online+0x94/0xd0
 [<ffffffff814122fb>] dev_attr_store+0x1b/0x20
 [<ffffffff81216404>] sysfs_write_file+0xf4/0x170
 [<ffffffff811a1024>] vfs_write+0xb4/0x130
 [<ffffffff811a17ea>] sys_write+0x5a/0xa0
 [<ffffffff816643a9>] system_call_fastpath+0x16/0x1b
Code: 03 18 00 c9 c3 66 2e 0f 1f 84 00 00 00 00 00 55 48 89 e5 48 83 ec 30 48 89 5d e8 4c 89 65 f0 48 89 fb 4c 89 6d f8 e8 84 08 00 00 <48> 8b 78 08 49 89 c4 e8 f8 7f c1 ff 89 c2 b8 ea ff ff ff 84 d2
RIP  [<ffffffff814d956c>] __cpuidle_register_device+0x1c/0x120
 RSP <ffff88009dacfcb8>

This patch fixes that by moving the CPU notifier registration
as the last item to be done by the module.

Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Reviewed-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com>
Cc: 3.6+ <stable@vger.kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-01-18 13:43:43 +01:00
Youquan Song
17915d582f intel_idle: pr_debug information need separated
When debug kernel, the the below information is found:
intel_idle: unaware of model 0x1a MWAIT 4 please contact lenb@kernel.orgACPI: Device input0 -> No ACPI support

so this patch separates it.

Signed-off-by: Youquan Song <youquan.song@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-01-03 13:11:05 +01:00
Julius Werner
a474a51549 cpuidle: Measure idle state durations with monotonic clock
Many cpuidle drivers measure their time spent in an idle state by
reading the wallclock time before and after idling and calculating the
difference. This leads to erroneous results when the wallclock time gets
updated by another processor in the meantime, adding that clock
adjustment to the idle state's time counter.

If the clock adjustment was negative, the result is even worse due to an
erroneous cast from int to unsigned long long of the last_residency
variable. The negative 32 bit integer will zero-extend and result in a
forward time jump of roughly four billion milliseconds or 1.3 hours on
the idle state residency counter.

This patch changes all affected cpuidle drivers to either use the
monotonic clock for their measurements or make use of the generic time
measurement wrapper in cpuidle.c, which was already working correctly.
Some superfluous CLIs/STIs in the ACPI code are removed (interrupts
should always already be disabled before entering the idle function, and
not get reenabled until the generic wrapper has performed its second
measurement). It also removes the erroneous cast, making sure that
negative residency values are applied correctly even though they should
not appear anymore.

Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Preeti U Murthy <preeti@linux.vnet.ibm.com>
Tested-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Len Brown <len.brown@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2012-11-27 14:17:58 +01:00
Len Brown
23795e580c intel_idle: enable IVB Xeon support
IVB Xeon currently shares the same parameters IVB client.

Signed-off-by: Len Brown <len.brown@intel.com>
2012-09-26 22:28:21 -04:00
Konrad Rzeszutek Wilk
3735d524da intel_idle: Check cpu_idle_get_driver() for NULL before dereferencing it.
If the machine is booted without any cpu_idle driver set
(b/c disable_cpuidle() has been called) we should follow
other users of cpu_idle API and check the return value
for NULL before using it.

Reported-and-tested-by: Mark van Dijk <mark@internecto.net>
Suggested-by: Jan Beulich <JBeulich@suse.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2012-08-17 19:37:14 +02:00
Linus Torvalds
476525004a Merge branch 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux
Pull ACPI & power management update from Len Brown:
 "Re-write of the turbostat tool.
     lower overhead was necessary for measuring very large system when
     they are very idle.

  IVB support in intel_idle
     It's what I run on my IVB, others should be able to also:-)

  ACPICA core update
     We have found some bugs due to divergence between Linux and the
     upstream ACPICA base.  Most of these patches are to reduce that
     divergence to reduce the risk of future bugs.

  Some cpuidle updates, mostly for non-Intel
     More will be coming, as they depend on this part.

  Some thermal management changes needed by non-ACPI systems.

  Some _OST (OS Status Indication) updates for hot ACPI hot-plug."

* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux: (51 commits)
  Thermal: Documentation update
  Thermal: Add Hysteresis attributes
  Thermal: Make Thermal trip points writeable
  ACPI/AC: prevent OOPS on some boxes due to missing check power_supply_register() return value check
  tools/power: turbostat: fix large c1% issue
  tools/power: turbostat v2 - re-write for efficiency
  ACPICA: Update to version 20120711
  ACPICA: AcpiSrc: Fix some translation issues for Linux conversion
  ACPICA: Update header files copyrights to 2012
  ACPICA: Add new ACPI table load/unload external interfaces
  ACPICA: Split file: tbxface.c -> tbxfload.c
  ACPICA: Add PCC address space to space ID decode function
  ACPICA: Fix some comment fields
  ACPICA: Table manager: deploy new firmware error/warning interfaces
  ACPICA: Add new interfaces for BIOS(firmware) errors and warnings
  ACPICA: Split exception code utilities to a new file, utexcep.c
  ACPI: acpi_pad: tune round_robin_time
  ACPICA: Update to version 20120620
  ACPICA: Add support for implicit notify on multiple devices
  ACPICA: Update comments; no functional change
  ...
2012-07-26 14:28:55 -07:00
Daniel Lezcano
25ac77613a ACPI: intel_idle : break dependency between modules
When the system is booted with some cpus offline, the idle
driver is not initialized. When a cpu is set online, the
acpi code call the intel idle init function. Unfortunately
this code introduce a dependency between intel_idle and acpi.

This patch is intended to remove this dependency by using the
notifier of intel_idle. This patch has the benefit of
encapsulating the intel_idle driver and remove some exported
functions.

Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2012-07-05 22:37:47 +02:00
Len Brown
6edab08c24 intel_idle: initial IVB support
From an OS point of view, IVB looks like SNB, but quicker.

Signed-off-by: Len Brown <len.brown@intel.com>
2012-06-05 15:39:11 -04:00
Marcos Paulo de Souza
dc716e96f5 drivers/idle/intel_idle.c: fix confusing code identation
Fix a code indentation in the function intel_idle_cpu_init that looks
confusing.o

Suggested-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com>
Reviewed-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com>
Signed-off-by: Marcos Paulo de Souza <marcos.mage@gmail.com>
Cc: "Brown, Len" <len.brown@intel.com>
Cc: Len Brown <lenb@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-03-21 17:54:54 -07:00
Ben Hutchings
8bf1193845 intel_idle: Revert change of auto_demotion_disable_flags for Nehalem
Commit b66b8b9a4a ('intel-idle: convert
to x86_cpu_id auto probing') added a distinction between Nehalem and
Westemere processors and changed auto_demotion_disable_flags for the
former to 0.  This was not explained in the commit message, so change
it back.

Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Acked-by: Thomas Renninger <trenn@suse.de>
Acked-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-02-15 22:27:15 -08:00
Ben Hutchings
e668505c98 intel_idle: Fix ID for Nehalem-EX Xeon in device ID table
Commit b66b8b9a4a ('intel-idle: convert
to x86_cpu_id auto probing') put two entries for model 0x2f
(Westmere-EX Xeon) in the device ID table and left out model 0x2e
(Nehalem-EX Xeon).

Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Acked-by: Thomas Renninger <trenn@suse.de>
Acked-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-02-13 15:24:27 -08:00
Greg Kroah-Hartman
bd1d462e13 Merge 3.3-rc2 into the driver-core-next branch.
This was done to resolve a merge and build problem with the
drivers/acpi/processor_driver.c file.

Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-02-02 11:24:44 -08:00
Andi Kleen
b66b8b9a4a intel-idle: convert to x86_cpu_id auto probing
With this it should be automatically loaded on suitable systems by
udev.

The old switch () is replaced with a table based approach, this
also cleans up the code.

Cc: Len Brown <lenb@kernel.org>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Thomas Renninger <trenn@suse.de>
Acked-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2012-01-26 16:48:11 -08:00
Thomas Renninger
99b7250844 ACPI processor hotplug: Delay acpi_processor_start() call for hotplugged cores
Delay the setting up of features (cpuidle, throttling by calling
acpi_processor_start()) to the time when the hotplugged
core got onlined the first time and got fully
initialized.

Signed-off-by: Thomas Renninger <trenn@suse.de>
Signed-off-by: Len Brown <len.brown@intel.com>
2012-01-19 21:26:32 -05:00
Len Brown
79ba0db69c Merge branches 'einj', 'intel_idle', 'misc', 'srat' and 'turbostat-ivb' into release 2012-01-18 01:15:54 -05:00
Thomas Renninger
65b7f839ce intel_idle: Split up and provide per CPU initialization func
Function split up, should have no functional change.

Provides entry point for physically hotplugged CPUs
to initialize and activate cpuidle.

Signed-off-by: Thomas Renninger <trenn@suse.de>
CC: Deepthi Dharwar <deepthi@linux.vnet.ibm.com>
CC: Shaohua Li <shaohua.li@intel.com>
CC: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Len Brown <len.brown@intel.com>
2012-01-17 23:59:12 -05:00
Thomas Renninger
5c2a9f06a9 intel idle: Make idle driver more robust
kvm -cpu host passes the original cpuid info to the guest.

Latest kvm version seem to return true for mwait_leaf cpuid
function on recent Intel CPUs. But it does not return mwait
C-states (mwait_substates), instead zero is returned.

While real CPUs seem to always return non-zero values, the intel
idle driver should not get active in kvm (mwait_substates == 0)
case and bail out.
Otherwise a Null pointer exception will happen later when the
cpuidle subsystem tries to get active:
[0.984807] BUG: unable to handle kernel NULL pointer dereference at (null)
[0.984807] IP: [<(null)>] (null)
...
[0.984807][<ffffffff8143cf34>] ? cpuidle_idle_call+0xb4/0x340
[0.984807][<ffffffff8159e7bc>] ? __atomic_notifier_call_chain+0x4c/0x70
[0.984807][<ffffffff81001198>] ? cpu_idle+0x78/0xd0

Reference:
https://bugzilla.novell.com/show_bug.cgi?id=726296

Cc: stable@vger.kernel.org
Signed-off-by: Thomas Renninger <trenn@suse.de>
CC: Bruno Friedmann <bruno@ioda-net.ch>
Signed-off-by: Len Brown <len.brown@intel.com>
2012-01-17 14:19:59 -05:00
David Howells
95e3ec1149 intel_idle: Fix a cast to pointer from integer of different size warning in intel_idle
Fix the following warning:

drivers/idle/intel_idle.c: In function 'intel_idle_cpuidle_devices_init':
drivers/idle/intel_idle.c:518:5: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast]

By making get_driver_data() return a long instead of an int.

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2012-01-17 14:19:59 -05:00
Yanmin Zhang
63ff07beae intel_idle: remove redundant local_irq_disable() call
irq disabling happens earlier in process_32.c:cpu_idle.  Basically,
cpuidle_state->enter is called, cpu irq is disabled.  cpuidle_state->enter
would turn on irq when exiting.

intel_idle doesn't follow this assumption.  Although it doesn't cause real
issue, it misleads developers.  Remove the call to local_irq_disable() at
entry.

[akpm@linux-foundation.org: add comment]
Signed-off-by: Mingming Zhang <mingmingx.zhang@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Len Brown <len.brown@intel.com>
2012-01-17 14:19:58 -05:00
Shaohua Li
39a74fdedd intel_idle: fix API misuse
smp_call_function() only lets all other CPUs execute a specific function,
while we expect all CPUs do in intel_idle.  Without the fix, we could have
one cpu which has auto_demotion enabled or has no broadcast timer setup.
Usually we don't see impact because auto demotion just harms power and the
intel_idle init is called in CPU 0, where boradcast timer delivers
interrupt, but this still could be a problem.

Cc: stable@vger.kernel.org
Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Len Brown <len.brown@intel.com>
2012-01-17 05:15:36 -05:00
Linus Torvalds
3c00303206 Merge branch 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux
* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux:
  cpuidle: Single/Global registration of idle states
  cpuidle: Split cpuidle_state structure and move per-cpu statistics fields
  cpuidle: Remove CPUIDLE_FLAG_IGNORE and dev->prepare()
  cpuidle: Move dev->last_residency update to driver enter routine; remove dev->last_state
  ACPI: Fix CONFIG_ACPI_DOCK=n compiler warning
  ACPI: Export FADT pm_profile integer value to userspace
  thermal: Prevent polling from happening during system suspend
  ACPI: Drop ACPI_NO_HARDWARE_INIT
  ACPI atomicio: Convert width in bits to bytes in __acpi_ioremap_fast()
  PNPACPI: Simplify disabled resource registration
  ACPI: Fix possible recursive locking in hwregs.c
  ACPI: use kstrdup()
  mrst pmu: update comment
  tools/power turbostat: less verbose debugging
2011-11-07 10:13:52 -08:00
Deepthi Dharwar
46bcfad7a8 cpuidle: Single/Global registration of idle states
This patch makes the cpuidle_states structure global (single copy)
instead of per-cpu. The statistics needed on per-cpu basis
by the governor are kept per-cpu. This simplifies the cpuidle
subsystem as state registration is done by single cpu only.
Having single copy of cpuidle_states saves memory. Rare case
of asymmetric C-states can be handled within the cpuidle driver
and architectures such as POWER do not have asymmetric C-states.

Having single/global registration of all the idle states,
dynamic C-state transitions on x86 are handled by
the boot cpu. Here, the boot cpu  would disable all the devices,
re-populate the states and later enable all the devices,
irrespective of the cpu that would receive the notification first.

Reference:
https://lkml.org/lkml/2011/4/25/83

Signed-off-by: Deepthi Dharwar <deepthi@linux.vnet.ibm.com>
Signed-off-by: Trinabh Gupta <g.trinabh@gmail.com>
Tested-by: Jean Pihet <j-pihet@ti.com>
Reviewed-by: Kevin Hilman <khilman@ti.com>
Acked-by: Arjan van de Ven <arjan@linux.intel.com>
Acked-by: Kevin Hilman <khilman@ti.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2011-11-06 21:13:58 -05:00
Deepthi Dharwar
4202735e8a cpuidle: Split cpuidle_state structure and move per-cpu statistics fields
This is the first step towards global registration of cpuidle
states. The statistics used primarily by the governor are per-cpu
and have to be split from rest of the fields inside cpuidle_state,
which would be made global i.e. single copy. The driver_data field
is also per-cpu and moved.

Signed-off-by: Deepthi Dharwar <deepthi@linux.vnet.ibm.com>
Signed-off-by: Trinabh Gupta <g.trinabh@gmail.com>
Tested-by: Jean Pihet <j-pihet@ti.com>
Reviewed-by: Kevin Hilman <khilman@ti.com>
Acked-by: Arjan van de Ven <arjan@linux.intel.com>
Acked-by: Kevin Hilman <khilman@ti.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2011-11-06 21:13:49 -05:00
Deepthi Dharwar
e978aa7d7d cpuidle: Move dev->last_residency update to driver enter routine; remove dev->last_state
Cpuidle governor only suggests the state to enter using the
governor->select() interface, but allows the low level driver to
override the recommended state. The actual entered state
may be different because of software or hardware demotion. Software
demotion is done by the back-end cpuidle driver and can be accounted
correctly. Current cpuidle code uses last_state field to capture the
actual state entered and based on that updates the statistics for the
state entered.

Ideally the driver enter routine should update the counters,
and it should return the state actually entered rather than the time
spent there. The generic cpuidle code should simply handle where
the counters live in the sysfs namespace, not updating the counters.

Reference:
https://lkml.org/lkml/2011/3/25/52

Signed-off-by: Deepthi Dharwar <deepthi@linux.vnet.ibm.com>
Signed-off-by: Trinabh Gupta <g.trinabh@gmail.com>
Tested-by: Jean Pihet <j-pihet@ti.com>
Reviewed-by: Kevin Hilman <khilman@ti.com>
Acked-by: Arjan van de Ven <arjan@linux.intel.com>
Acked-by: Kevin Hilman <khilman@ti.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2011-11-06 21:13:30 -05:00
Paul Gortmaker
7c52d55170 x86: fix up files really needing to include module.h
These files aren't just exporting symbols -- they are also defining
a MODULE_LICENSE etc. so give them the full module.h file.

Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-10-31 19:30:36 -04:00
Thomas Renninger
15e123e5d7 intel_idle: Rename cpuidle states
Userspace apps might have to cut off parts off the
idle state name for display reasons.
Switch NHM-C1 to C1-NHM (and others) so that a cut off
name is unique and makes sense to the user.

Signed-off-by: Thomas Renninger <trenn@suse.de>
CC: lenb@kernel.org
Signed-off-by: Len Brown <len.brown@intel.com>
2011-02-28 11:04:45 -05:00
Len Brown
bfb53ccf1c intel_idle: disable Atom/Lincroft HW C-state auto-demotion
Just as we had to disable auto-demotion for NHM/WSM,
we need to do the same for Atom (Lincroft version).

In particular, auto-demotion will prevent Lincroft
from entering the S0i3 idle power saving state.

https://bugzilla.kernel.org/show_bug.cgi?id=25252

Signed-off-by: Len Brown <len.brown@intel.com>
2011-02-17 17:08:48 -05:00
Len Brown
14796fca2b intel_idle: disable NHM/WSM HW C-state auto-demotion
Hardware C-state auto-demotion is a mechanism where the HW overrides
the OS C-state request, instead demoting to a shallower state,
which is less expensive, but saves less power.

Modern Linux should generally get exactly the states it requests.
In particular, when a CPU is taken off-line, it must not be demoted, else
it can prevent the entire package from reaching deep C-states.

https://bugzilla.kernel.org/show_bug.cgi?id=25252

Signed-off-by: Len Brown <len.brown@intel.com>
2011-02-17 17:08:46 -05:00
Shaohua Li
ec30f343d6 fix a shutdown regression in intel_idle
Fix a shutdown regression caused by 2a2d31c8dc ("intel_idle: open
broadcast clock event").  The clockevent framework can automatically
shutdown broadcast timers for hotremove CPUs.  And we get a shutdown
regression when we shutdown broadcast timer for hot remove CPU, so just
delete some code.

Also fix some section mismatch.

Reported-by: Ari Savolainen <ari.m.savolainen@gmail.com>
Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Tested-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-01-25 05:57:34 +10:00