IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
This patch adds DT bindings for the new Atmel I2S controller embedded
inside sama5d2x SoCs.
Signed-off-by: Cyrille Pitchen <cyrille.pitchen@atmel.com>
Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch adds bindings required for TDM ports on AFE.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch describes syscon DT bindings.
Signed-off-by: Christophe Roullier <christophe.roullier@st.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add description for Ethernet MPU families fields
Signed-off-by: Christophe Roullier <christophe.roullier@st.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch is to add a documentation for ptp_qoriq dt-bindings.
The description for ptp_qoriq dt-bindings was actually moved
from Documentation/devicetree/bindings/net/fsl-tsec-phy.txt,
since gianfar_ptp driver was moved to ptp_qoriq driver.
Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Documentation for Renesas R-Car MIPI CSI-2 receiver. The CSI-2 receivers
are located between the video sources (CSI-2 transmitters) and the video
grabbers (VIN) on Gen3 of Renesas R-Car SoC.
Each CSI-2 device is connected to more than one VIN device which
simultaneously can receive video from the same CSI-2 device. Each VIN
device can also be connected to more than one CSI-2 device. The routing
of which links are used is controlled by the VIN devices. There are only
a few possible routes which are set by hardware limitations, which are
different for each SoC in the Gen3 family.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
* SoC
- Change platform dependency to ARCH_RENESAS
Geert Uytterhoeven says "The Renesas Fine Display Processor driver is
used on Renesas R-Car SoCs only. Since commit 9b5ba0df4ea4f940 ("ARM:
shmobile: Introduce ARCH_RENESAS") is ARCH_RENESAS a more appropriate
platform dependency than the legacy ARCH_SHMOBILE, hence use the
former.
This will allow to drop ARCH_SHMOBILE on ARM and ARM64 in the near
future."
- Add the to Kconfig RZ/N1D (r9a06g032) SoC
In preparation for upstream support of this SoC
- Identify R-Car E3 (r8a77990) SoC
- Identify and add minimal support for RZ/G1C (r8a77470) SoC
* R-Car SYSC
- Add support for R-Car E3 (r8a77990) SoC
Shimoda-san says this adds:
+ "Cortex-A53 CPU{0,1}, Cortex-A53 SCU, Cortex-R7, A3VC,
A2VC1 and 3DG-{A,B} power domain areas..."
+ "workaround for 3DG-{A,B} of R-Car E3 ES1.0 because
the SoC has a restriction about the order."
- Remove unused inclusion of <linux/sys_soc.h>,
- Make r8a77995_areas[] const.
* R-Car Reset
- Add support for R-Car E3 (r8a77990) SoC
This driver is needed for the clock driver to work
* Debug-LL
- Add support for RZ/G1C (r8a77470) SoC
RZ/G1C uses SCIF1 for the debug console
-----BEGIN PGP SIGNATURE-----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=xLPA
-----END PGP SIGNATURE-----
Merge tag 'renesas-soc-for-v4.18' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/soc
Renesas ARM Based SoC Updates for v4.18
* SoC
- Change platform dependency to ARCH_RENESAS
This will allow to drop ARCH_SHMOBILE on ARM and ARM64 in the near
future.
- Add the to Kconfig RZ/N1D (r9a06g032) SoC
- Identify R-Car E3 (r8a77990) SoC
- Identify and add minimal support for RZ/G1C (r8a77470) SoC
* R-Car SYSC
- Add support for R-Car E3 (r8a77990) SoC
- Remove unused inclusion of <linux/sys_soc.h>,
- Make r8a77995_areas[] const.
* R-Car Reset
- Add support for R-Car E3 (r8a77990) SoC
* Debug-LL
- Add support for RZ/G1C (r8a77470) SoC
* tag 'renesas-soc-for-v4.18' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
soc: renesas: r8a77990-sysc: Add workaround for 3DG-{A,B}
soc: renesas: rcar-sysc: Add support for R-Car E3 power areas
arm: shmobile: Add the RZ/N1D (R9A06G032) to the shmobile Kconfig
arm: shmobile: Change platform dependency to ARCH_RENESAS
soc: renesas: r8a77995-sysc: Cleanups
soc: renesas: rcar-rst: Add support for R-Car E3
soc: renesas: Add r8a77990 SYSC PM Domain Binding Definitions
soc: renesas: identify R-Car E3
ARM: debug-ll: Add support for r8a77470
ARM: shmobile: Add the RZ/N1 arch to the shmobile Kconfig
ARM: shmobile: r8a77470: basic SoC support
soc: renesas: rcar-sysc: Add r8a77470 support
soc: renesas: rcar-rst: Add support for RZ/G1C
soc: renesas: Identify RZ/G1C
Signed-off-by: Olof Johansson <olof@lixom.net>
Document bindings for:
* V3H Starter Kit, a board used with the R-Car V3H (r8a77980) SoC
* R-Car E3 (R8A77990) SoC and its Ebisu board
* iWave Systems RZ/G1C Single Board Computer (iW-RainboW-G23S)
which uses an RZ/G1C (R8A77470) SoC
* RZ/G1M (R8A7743) and RZ/G1N (R8A7744) CMT support
Cleanup:
* Consistently name r8a77965 as R-Car M3-N
-----BEGIN PGP SIGNATURE-----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=xUdq
-----END PGP SIGNATURE-----
Merge tag 'renesas-dt-bindings-for-v4.18' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/dt
Renesas ARM Based SoC DT Bindings Updates for v4.18
Document bindings for:
* V3H Starter Kit, a board used with the R-Car V3H (r8a77980) SoC
* R-Car E3 (R8A77990) SoC and its Ebisu board
* iWave Systems RZ/G1C Single Board Computer (iW-RainboW-G23S)
which uses an RZ/G1C (R8A77470) SoC
* RZ/G1M (R8A7743) and RZ/G1N (R8A7744) CMT support
Cleanup:
* Consistently name r8a77965 as R-Car M3-N
* tag 'renesas-dt-bindings-for-v4.18' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
dt-bindings: arm: document Renesas V3HSK board bindings
dt-bindings: timer: renesas, cmt: Document r8a774[35] CMT support
dt-bindings: arm: consistently name r8a77965 as M3-N
dt-bindings: arm: Document Renesas Ebisu board DT bindings
dt-bindings: arm: Document R-Car E3 SoC DT bindings
dt-bindings: arm: Document iW-RainboW-G23S single board computer
Signed-off-by: Olof Johansson <olof@lixom.net>
New hardware support added:
USB controllers for AST2400 and AST2500 which have drivers
merged in 4.18.
Hardware random number generator which we made enhancements to many
releases ago, but never added the device tree parts.
Misc changes to support watchdog and gpio-keys features used by
OpenBMC systems.
New machines:
Intel S2600WF, an Intel platform family with an ASPEED AST2500 BMC.
Inventec Lanyang, a Power 9 platform with AST2500.
Portwell Neptune, a x86 server development kit with an AST2500.
-----BEGIN PGP SIGNATURE-----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=bGbT
-----END PGP SIGNATURE-----
Merge tag 'aspeed-4.18-devicetree' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/aspeed into next/dt
ASPEED device tree updates for 4.18
New hardware support added:
USB controllers for AST2400 and AST2500 which have drivers
merged in 4.18.
Hardware random number generator which we made enhancements to many
releases ago, but never added the device tree parts.
Misc changes to support watchdog and gpio-keys features used by
OpenBMC systems.
New machines:
Intel S2600WF, an Intel platform family with an ASPEED AST2500 BMC.
Inventec Lanyang, a Power 9 platform with AST2500.
Portwell Neptune, a x86 server development kit with an AST2500.
* tag 'aspeed-4.18-devicetree' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/aspeed:
ARM: dts: Aspeed: Enable USB ports on eval board.
ARM: dts: Add Aspeed SoC USB controllers to device-tree
ARM: dts: aspeed: Add S2600WF BMC Machine
ARM: dts: aspeed: Add Inventec Lanyang BMC
ARM: dts: aspeed: Add Portwell Neptune machine
ARM: dts: aspeed: witherspoon: Set alternate boot
ARM: dts: aspeed: witherspoon: Add gpio keys for power supply presence
ARM: dts: aspeed: witherspoon: Enable checkstop and cooling gpio keys
ARM: dts: aspeed: zaius: Add pcie-e2b-present gpio key
ARM: dts: aspeed: romulus: Add id-button gpio key
ARM: dts: aspeed: Describe random number device
Signed-off-by: Olof Johansson <olof@lixom.net>
-----BEGIN PGP SIGNATURE-----
iQFEBAABCAAuFiEE7v+35S2Q1vLNA3Lx86Z5yZzRHYEFAlsGtd0QHGhlaWtvQHNu
dGVjaC5kZQAKCRDzpnnJnNEdgZNOCACgExx606ykKSFj9SZEUdXyR/iLCxfrPyoW
28r5IZ6lcp+k5lkJXbsISiyO1pkj7Stz++Uur/blecdwdeLz7nRUNcuDYhXf+2Vp
m4fGvY0Gsz0dFrWO0GoVbVNh5IqjS0zNJRoJQckA+gPUmsXhisf+/ZwWxZj8gl1M
r44+9zDGAYuvacnu2UwYMoOQWywu4gdU/W3cH/bY0CCr6D3RoV9f7NxOYUxGGCeT
DAp9b4pmrIvNZrhOeXSDT3+xO2mMC9wOoDMudeVPlvn6JhfD3dhrgrg7/XKF6X8J
xAjVEBVA0jPzNPWXCMPl3Mne13mbK5DTGwSQVuDGuq3N66T/B5D0
=x85Q
-----END PGP SIGNATURE-----
Merge tag 'v4.18-rockchip-drivers-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into next/drivers
Power-domain support for Rockchip socs px30, rk3128, rk3228 and rk3036.
* tag 'v4.18-rockchip-drivers-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
soc: rockchip: power-domain: add power domain support for px30
dt-bindings: power: add binding for px30 power domains
dt-bindings: power: add PX30 SoCs header for power-domain
soc: rockchip: power-domain: add power domain support for rk3228
dt-bindings: power: add binding for rk3228 power domains
dt-bindings: power: add RK3228 SoCs header for power-domain
soc: rockchip: power-domain: add power domain support for rk3128
dt-bindings: power: add binding for rk3128 power domains
dt-bindings: power: add RK3128 SoCs header for power-domain
soc: rockchip: power-domain: add power domain support for rk3036
dt-bindings: power: add binding for rk3036 power domains
dt-bindings: power: add RK3036 SoCs header for power-domain
Signed-off-by: Olof Johansson <olof@lixom.net>
* Add support for SDM845 and associated peripherals
* Fix gic_irq_domain_translation warnings on Qualcomm platforms
* Add binding for GENI SE, Qualcomm bluetooth, and Command DB
* Add support for SDHCI and ramoops on MSM8992
* Fixup qcom,pcie devices to pcie
* Add wlan, bluetooth, and micro SD supplies on db820c
* Add UFS related nodes on MSM8996
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=pxUm
-----END PGP SIGNATURE-----
Merge tag 'qcom-arm64-for-4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux into next/dt
Qualcomm ARM64 Updates for v4.18
* Add support for SDM845 and associated peripherals
* Fix gic_irq_domain_translation warnings on Qualcomm platforms
* Add binding for GENI SE, Qualcomm bluetooth, and Command DB
* Add support for SDHCI and ramoops on MSM8992
* Fixup qcom,pcie devices to pcie
* Add wlan, bluetooth, and micro SD supplies on db820c
* Add UFS related nodes on MSM8996
* tag 'qcom-arm64-for-4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux:
arm64: dts: qcom: msm8996: Add ufs related nodes
arm64: dts: msm8996: fix gic_irq_domain_translate warnings
arm64: dts: qcom: sdm845: Sort nodes in the soc by address
arm64: dts: qcom: sdm845: Sort nodes in the reserved mem by address
arm64: dts: sdm845: Add command DB node
arm64: dts: sdm845: Fix xo_board clock name and speed
arm64: dts: qcom: Add SDM845 SMEM nodes
arm64: dts: qcom: Add APSS shared mailbox node to SDM845
arm64: dts: msm8916: fix gic_irq_domain_translate warnings
dt-bindings: introduce Command DB for QCOM SoCs
arm64: dts: apq8096-db820c: Add micro sd card supplies
dt-bindings: soc: qcom: Add device tree binding for GENI SE
dt-bindings: net: bluetooth: Add qualcomm-bluetooth
arm64: dts: apq8096-db820c: enable bluetooth node
arm64: dts: apq8096-db820c: Enable wlan and bt en pins
arm64: dts: qcom: rename qcom,pcie devices to pcie
arm64: dts: msm8992: add pstore-ramoops support
arm64: dts: sdm845: Add minimal dts/dtsi files for sdm845 SoC and MTP
arm64: dts: Enable onboard SDHCI on msm8992
Signed-off-by: Olof Johansson <olof@lixom.net>
Here is our usual bunch of DT changes for our arm SoCs, with most
significantly:
- MIPI-DSI support for the A33
- NAND support for the A33
- SMP support for the A83t
- GMAC support for the R40
- And some new boards: Olimex A20-SOM-EVB-eMMC, Nintendo NES and SuperNES
Classic
-----BEGIN PGP SIGNATURE-----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=f5iC
-----END PGP SIGNATURE-----
Merge tag 'sunxi-dt-for-4.18' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into next/dt
Allwinner DT additions for 4.18
Here is our usual bunch of DT changes for our arm SoCs, with most
significantly:
- MIPI-DSI support for the A33
- NAND support for the A33
- SMP support for the A83t
- GMAC support for the R40
- And some new boards: Olimex A20-SOM-EVB-eMMC, Nintendo NES and SuperNES
Classic
* tag 'sunxi-dt-for-4.18' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
ARM: dts: sun7i: Add Olimex A20-SOM-EVB-eMMC board
ARM: dts: sun8i: r40: bananapi-m2-ultra: Enable GMAC ethernet controller
ARM: dts: sun8i: r40: Add device node and RGMII pinmux node for GMAC
ARM: dts: sun8i: r40: bananapi-m2-ultra: Sort device node dereferences
ARM: dts: sun8i: Add enable-method for SMP support for the A83T SoC
ARM: dts: sun8i: a83t: Add CCI-400 node
ARM: dts: sun8i: Add R_CPUCFG device node for the A83T dtsi
ARM: dts: sun8i: Add CPUCFG device node for A83T dtsi
ARM: dts: nes: add Nintendo NES/SuperNES Classic Edition support
ARM: dts: sun8i: a23/a33: declare NAND pins
ARM: dts: sunxi: Add sid for a83t
ARM: dts: sun8i: a33: Add the DSI-related nodes
ARM: dts: sunxi: Change sun7i-a20-olimex-som204-evb to not use cd-inverted
ARM: sun8i: v40: enable USB host ports for Banana Pi M2 Berry
Signed-off-by: Olof Johansson <olof@lixom.net>
- New boards support: BTicino i.MX6DL Mamoj board, DHCOM iMX6 SoM and
PDK2 board, Engicam i.CoreM6 1.5 Quad/Dual MIPI starter kit,
Kieback & Peter GmbH iMX6Q TPC board.
- A series from Anson Huang to add a bunch of devices for i.MX6SX
SabreAuto board, PMIC, IO expanders, FEC, Watchdog, LED and Touch.
- Update i.MX7D for cpufreq support, using operating-points-v2
bindings, correcting cpu supply name for voltage scaling.
- Clean up unneeded 'codec-handle' property from imx25-pdk and
imx53-tx53 device tree.
- Switch SoC dtsi and NXP board dts files to use SPDX identifier.
- Remove unnecessary '#address-cells/#size-cells' to fix DTC warning
avoid_unnecessary_addr_size seen with W=1 switch.
- A series from Rob Herring to fix DTC warning graph_endpoint seen with
IPU OF graph when W=1 switch is on.
- Update a few boards to use symbol name instead of hard-coding the
input codes.
- Update a number of boards to use IRQ_TYPE specifier instead of the
raw value.
- A few updates for i.MX6 RDU2 board: bumping SoC/PU operating points,
adding assigned clocks for GPU, and enabling eGalax touchscreen.
- A couple of i.MX51 RDU1 updates: limiting usbh1 to full-speed, and
cleaning up eMMC device node.
- Convert Hummingboard audio bindings from imx-audio-sgtl5000 to
simple-audio-card, so that auxiliary audio devices such as external
amplifiers can be supported.
- Replace underscore with hyphen in aliases name to fix DTC warning
alias_paths with W=1 switch.
- A couple of updates on i.MX7D SAI and i.MX6ULL UART5 pin defines.
- Other random and small changes.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJbAYgeAAoJEFBXWFqHsHzO8ZUH/RG21GCtMGozrIoL9f0/6R4T
wBj/vdg31XGk7XYkmxKH5J6hwryco7Z2uMfKhsRbfXUzt+DxwtseJUgaKHygk/oh
ns7LhuSvhYwqa6AENN70DOt4b3TX/sAyYrBIFUXQRsZrafPhn7+8/Y8oiLbY3lOs
cctrHA31jz5ytXVoLT1AkFST020JcRjaTpRFYqDohpcOOMqhpjPxPJ6uF6lE/LHf
XVzBYGbxzmzH5PDpEy7KjzkxDt0cvBfH7LrfvcHzi8hGho3P1ShpRah/TYKpmwkx
MVD1NRFTCwKgIjibcjfLse9NJdixza5j6pvWaCacC9agWG6drOxYvYy4ILe2ros=
=F8Nx
-----END PGP SIGNATURE-----
Merge tag 'imx-dt-4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/dt
i.MX device tree update for 4.18:
- New boards support: BTicino i.MX6DL Mamoj board, DHCOM iMX6 SoM and
PDK2 board, Engicam i.CoreM6 1.5 Quad/Dual MIPI starter kit,
Kieback & Peter GmbH iMX6Q TPC board.
- A series from Anson Huang to add a bunch of devices for i.MX6SX
SabreAuto board, PMIC, IO expanders, FEC, Watchdog, LED and Touch.
- Update i.MX7D for cpufreq support, using operating-points-v2
bindings, correcting cpu supply name for voltage scaling.
- Clean up unneeded 'codec-handle' property from imx25-pdk and
imx53-tx53 device tree.
- Switch SoC dtsi and NXP board dts files to use SPDX identifier.
- Remove unnecessary '#address-cells/#size-cells' to fix DTC warning
avoid_unnecessary_addr_size seen with W=1 switch.
- A series from Rob Herring to fix DTC warning graph_endpoint seen with
IPU OF graph when W=1 switch is on.
- Update a few boards to use symbol name instead of hard-coding the
input codes.
- Update a number of boards to use IRQ_TYPE specifier instead of the
raw value.
- A few updates for i.MX6 RDU2 board: bumping SoC/PU operating points,
adding assigned clocks for GPU, and enabling eGalax touchscreen.
- A couple of i.MX51 RDU1 updates: limiting usbh1 to full-speed, and
cleaning up eMMC device node.
- Convert Hummingboard audio bindings from imx-audio-sgtl5000 to
simple-audio-card, so that auxiliary audio devices such as external
amplifiers can be supported.
- Replace underscore with hyphen in aliases name to fix DTC warning
alias_paths with W=1 switch.
- A couple of updates on i.MX7D SAI and i.MX6ULL UART5 pin defines.
- Other random and small changes.
* tag 'imx-dt-4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (72 commits)
ARM: dts: imx28/imx53: enable edt-ft5x06 wakeup source
ARM: dts: imx51-zii-rdu1: cleanup eMMC node
ARM: dts: vf610-zii-dev: enable vf610 builtin temp sensor
ARM: dts: imx7d: use operating-points-v2 for cpu
ARM: dts: imx7s-warp: remove unnecessary cpu regulator supply
ARM: dts: imx7d: correct cpu supply name for voltage scaling
ARM: dts: imx51-zii-rdu1: limit usbh1 to full-speed
ARM: dts: imx6/7: Remove unit-address from anatop regulators
ARM: dts: imx: Switch NXP boards to SPDX identifier
ARM: dts: imx6qdl-phytec-pfla02: Use IRQ_TYPE specifier
ARM: dts: imx53-voipac-dmm-668: Use IRQ_TYPE specifier
ARM: dts: imx53-qsb: Use IRQ_TYPE specifier
ARM: dts: vf-colibri-eval-v3: Use IRQ_TYPE specifier
ARM: dts: imx6q-gk802: Do not hardcode input codes
ARM: dts: imx53-smd: Do not hardcode input codes
ARM: dts: imx53-ard: Do not hardcode input codes
ARM: dts: imx7: Fix error in coresight TPIU graph connection
ARM: dts: imx53: Fix LDB OF graph warning
ARM: dts: imx: fix IPU OF graph endpoint node names
ARM: dts: imx: Switch to SPDX identifier
...
Signed-off-by: Olof Johansson <olof@lixom.net>
*) Add PHY driver for the ATH79 USB PHY
*) Add USB3 PHY driver for Mediatek XS-PHY
*) Add QUSB/QMP V3 USB3 PHY Support for Qualcomm's SDM845
*) Add runtime PM support for mapphone PHY driver
*) Allow phy_pm_runtime_xxx API calls to accept NULL
*) Other minor cleanups and fixes
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)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=5D63
-----END PGP SIGNATURE-----
Merge tag 'phy-for-4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/kishon/linux-phy into usb-next
Kishon writes:
phy: for 4.18
*) Add PHY driver for the ATH79 USB PHY
*) Add USB3 PHY driver for Mediatek XS-PHY
*) Add QUSB/QMP V3 USB3 PHY Support for Qualcomm's SDM845
*) Add runtime PM support for mapphone PHY driver
*) Allow phy_pm_runtime_xxx API calls to accept NULL
*) Other minor cleanups and fixes
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
This contains the device tree bindings updates for the memory controller
hot resets that are implemented by driver patches in a different branch.
-----BEGIN PGP SIGNATURE-----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=Ua3m
-----END PGP SIGNATURE-----
Merge tag 'tegra-for-4.18-dt-bindings' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into next/dt
dt-bindings: tegra: Changes for v4.18-rc1
This contains the device tree bindings updates for the memory controller
hot resets that are implemented by driver patches in a different branch.
* tag 'tegra-for-4.18-dt-bindings' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
dt-bindings: Relocate Tegra20 memory controller bindings
dt-bindings: arm: tegra: Document #reset-cells property of the Tegra20 MC
dt-bindings: memory: tegra: Document #reset-cells property of the Tegra30 MC
dt-bindings: arm: tegra: Remove duplicated Tegra30+ MC binding
Signed-off-by: Olof Johansson <olof@lixom.net>
Initial introduction of Portwell Neptune family equipped with
Aspeed 2500 BMC SoC. Neptune is a x86 server development kit with a
ASPEED ast2500 BMC manufactured by Portwell. Specifically, This
adds the neptune platform device tree file including the flash
layout used by the neptune machines.
Signed-off-by: Amithash Prasad <amithash@fb.com>
Acked-by: Andrew Jeffery <andrew@aj.id.au>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Document the DT bindings for the SAW regulators.
The saw-leader is the only property that is configurable in DT.
The saw-slave property allows ganging (grouping) of
several regulators so that their outputs can be combined.
Signed-off-by: Ilia Lin <ilialin@codeaurora.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAlsB91MeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGqLYH+gPrmb8gvH6CmckN
5U+RKRjzvs6oDqXf5yFUJ7NqW1Ex8qMuAqv1Kx2LpuN8sDD42fPB0A5OxijNgk81
omJIxqANbFPUQCt+epR1P5dp0XqbXCcIvmo9Dd2TM4EP0mcQqr+c61d7JXtVATMu
JrR5X7pgepatgH7JYI7fm1yIh/6RIhYZXjU2HxwiRHIzsLfW/sTmM4HZksv8nJjl
m+bT8XzEUCBhWCLT8z0TbbVug1N2qdyMzkMIS2JmDVJE4FZ9YOEnZzaCHGNZrkVV
OYzr94Bv2Z2PO3KIrsEsNA/szhr9/8f5Si9mk9nOi2kTuvaF9hhjKxcCozVB+ses
fm8wpmM=
=FiAO
-----END PGP SIGNATURE-----
Merge tag 'v4.17-rc6' into next
Sync up with mainline to bring in Atmel controller changes for Caroline.
A total of 98 non-merge commits, the biggest part being in dwc3 this
time around with a large refactoring of dwc3's transfer handling code.
We also have a new driver for Aspeed virtual hub controller.
Apart from that, just a list of miscellaneous fixes all over the place.
-----BEGIN PGP SIGNATURE-----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=b56m
-----END PGP SIGNATURE-----
Merge tag 'usb-for-v4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-next
usb: changes for v4.18 merge window
A total of 98 non-merge commits, the biggest part being in dwc3 this
time around with a large refactoring of dwc3's transfer handling code.
We also have a new driver for Aspeed virtual hub controller.
Apart from that, just a list of miscellaneous fixes all over the place.
Exti controller has been differently integrated on stm32mp1 SoC.
A parent irq has only one external interrupt. A hierachy domain could
be used. Handlers are call by parent, each parent interrupt could be
masked and unmasked according to the needs.
Signed-off-by: Ludovic Barre <ludovic.barre@st.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Update the dt-binding documentation to support new compatible string
for the GPIO interrupt controller which found in Amlogic's Meson-AXG SoC.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Yixun Lan <yixun.lan@amlogic.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
The double quotes seems not ASCII type, fix it here.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Yixun Lan <yixun.lan@amlogic.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Extend the capability of MT7622 pinctrl with adding EINT so that each
GPIO can be used to notify CPU when a signal state is changing on the
line as an external interrupt.
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
- Add support for the new R-Car E3 SoC,
- Add I2C pin groups on R-Car M3-N,
- Small fixes and cleanups.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=xeSy
-----END PGP SIGNATURE-----
Merge tag 'sh-pfc-for-v4.18-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers into devel
pinctrl: sh-pfc: Updates for v4.18 (take two)
- Add support for the new R-Car E3 SoC,
- Add I2C pin groups on R-Car M3-N,
- Small fixes and cleanups.
Proper support for Decon's hardware window no 4 and 5 require enabling
a few more clocks ("aclk_smmu_decon1x", "aclk_xiu_decon1x",
"pclk_smmu_decon1x"). Add those clocks to required clocks list in Decon's
dt bindings.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
The Elan touchpads over I2C/SMBus also can handle a trackstick.
Unfortunately, nothing tells us if the device supports trackstick (the
information lies in the PS/2 node), so rely on device properties to
determine whether to enable the trackstick node.
Link: https://bugzilla.redhat.com/show_bug.cgi?id=1313939
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: KT Liao <kt.liao@emc.com.tw>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Logic PD is an electronics design, engineering and manufacturing
company, which offers system on module and baseboard products.
Website: https://www.logicpd.com/
Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Add support for the four-port variant of the Qualcomm QCA833x switch.
The CPU port default link settings can be reconfigured using
a fixed-link sub-node.
Signed-off-by: Michal Vokáč <michal.vokac@ysoft.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Introduce the device tree bindings for the lm3601x
family of LED torch, flash and IR drivers.
Signed-off-by: Dan Murphy <dmurphy@ti.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
Add binding documentation for the power domains
found on Rockchip RK3228 SoCs.
Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Add binding documentation for the power domains
found on Rockchip RK3128 SoCs.
Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Add binding documentation for the power domains
found on Rockchip RK3036 SoCs.
Signed-off-by: Caesar Wang <wxt@rock-chips.com>
Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The i2c-bus property for sfp modules was made mandatory. Update the
documentation to keep it in sync with the driver's behaviour.
Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
-----BEGIN PGP SIGNATURE-----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=VQUJ
-----END PGP SIGNATURE-----
Merge tag 'for-kevin-meson-clk-bindings-v4.18-1' of https://github.com/BayLibre/clk-meson into v4.18/dt64
First round of binding update for meson clocks targeted at v4.18
# gpg: Signature made Wed May 16 01:23:15 2018 PDT
# gpg: using RSA key F4E159AE18F3F56D5F1BB71BE6FC0F1C37F2DA85
# gpg: Can't check signature: No public key
* tag 'for-kevin-meson-clk-bindings-v4.18-1' of https://github.com/BayLibre/clk-meson:
dt-bindings: clock: reset: Add AXG AO Clock and Reset Bindings
dt-bindings: clock: axg-aoclkc: New binding for Meson-AXG SoC
clk: meson: gxbb: expose VDEC_1 and VDEC_HEVC clocks
dt-bindings: clock: meson8b: export the NAND clock
This patch adds initial pinctrl driver to support for the R8A77990 SoC.
Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com>
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Initially we tried modeling clocks via the devicetree before switching
to clocks declared in the clock drivers and only exporting specific
ids to the devicetree.
As the old code was in the kernel for 1-2 releases when the new mode
of operation was added we kept it for backwards compatibility.
That deprecation notice is in the binding since july 2014, so nearly
4 years now and I think it's time to drop the old cruft.
Especially as at the time using the mainline kernel on Rockchip devices
was not really possible, except for experiments on the really old socs of
the rk3066 + rk3188 line, so there shouldn't be any devicetrees still
around that rely on that code.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Reviewed-by: Rob Herring <robh@kernel.org>
There are 4 banks (GPIO0 ~ GPIO3), bank0 is in PD_PMU
subsystem, bank1/bank2/bank3 are in PD_BUS subsystem.
Signed-off-by: David Wu <david.wu@rock-chips.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Broadcom based home router devices use partitions which have to be
discovered in a specific way. They are not fixed and there is not any
standard partition table. This commit adds and describes a new custom
binding for such devices.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Command DB provides information on shared resources like clocks,
regulators etc., probed at boot by the remote subsytem and made
available in shared memory.
Cc: devicetree@vger.kernel.org
Signed-off-by: Mahesh Sivasubramanian <msivasub@codeaurora.org>
Signed-off-by: Lina Iyer <ilina@codeaurora.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Evan Green <evgreen@chromium.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Add device tree binding support for the QCOM GENI SE driver.
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@codeaurora.org>
Signed-off-by: Sagar Dharia <sdharia@codeaurora.org>
Signed-off-by: Girish Mahadevan <girishm@codeaurora.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Add binding document for serial bluetooth chips using Qualcomm protocol.
Signed-off-by: Thierry Escande <thierry.escande@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
RTC embedded in stm32mp1 SoC is slightly different from stm32h7 one, it
doesn't require to disable backup domain write protection, and rtc_ck
parent clock assignment isn't allowed.
To sum up, stm32mp1 RTC requires 2 clocks, pclk and rtc_ck, and an RTC
alarm interrupt.
Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
