IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
We currently support two NICs in FW version 29, namely 7265D and 3168.
Out of these, only 7265D supports GEO SAR, so adjust the function that
checks for it accordingly.
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Fixes: f5a47fae6aa3 ("iwlwifi: mvm: fix version check for GEO_TX_POWER_LIMIT support")
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
In iwl_pcie_ctxt_info_gen3_init there are cases that the allocated dma
memory is leaked in case of error.
DMA memories prph_scratch, prph_info, and ctxt_info_gen3 are allocated
and initialized to be later assigned to trans_pcie. But in any error case
before such assignment the allocated memories should be released.
First of such error cases happens when iwl_pcie_init_fw_sec fails.
Current implementation correctly releases prph_scratch. But in two
sunsequent error cases where dma_alloc_coherent may fail, such
releases are missing.
This commit adds release for prph_scratch when allocation for
prph_info fails, and adds releases for prph_scratch and prph_info when
allocation for ctxt_info_gen3 fails.
Fixes: 2ee824026288 ("iwlwifi: pcie: support context information for 22560 devices")
Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
In alloc_sgtable if alloc_page fails, the alocated table should be
released.
Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
We don't handle failures in the rb_allocator workqueue allocation
correctly. To fix that, move the code earlier so the cleanup is
easier and we don't have to undo all the interrupt allocations in
this case.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
We got a crash in iwl_trans_pcie_get_cmdlen(), while the TFD was
being accessed to sum up the lengths.
We want to access the TFD here, which is the information for the
hardware. We always only allocate 32 buffers for the cmd queue,
but on newer hardware (using TFH) we can also allocate only a
shorter hardware array, also only 32 TFDs. Prior to the TFH, we
had to allocate a bigger TFD array but would make those point to
a smaller set of buffers.
Additionally, now max_tfd_queue_size is up to 65536, so we can
access *way* out of bounds of a really only 32-entry array, so
it crashes.
Fix this by making the TFD index depend on which hardware we are
using right now.
While changing the calculation, also fix it to not use void ptr
arithmetic, but cast to u8 * before.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Consider the following flow:
1. Driver starts to sync the rx queues due to a delba.
mvm->queue_sync_cookie=1.
This rx-queues-sync is synchronous, so it doesn't increment the
cookie until all rx queues handle the notification from FW.
2. During this time, driver starts to sync rx queues due to nssn sync
required.
The cookie's value is still 1, but it doesn't matter since this
rx-queue-sync is non-synchronous so in the notification handler the
cookie is ignored.
What _does_ matter is that this flow increments the cookie to 2
immediately.
Remember though that the FW won't start servicing this command until
it's done with the previous one.
3. FW is still handling the first command, so it sends a notification
with internal_notif->sync=1, and internal_notif->cookie=0, which
triggers a WARN_ONCE.
The solution for this race is to only use the mvm->queue_sync_cookie in
case of a synchronous sync-rx-queues. This way in step 2 the cookie's
value won't change so we avoid the WARN.
The commit in the "fixes" field is the first commit to introduce
non-synchronous sending of this command to FW.
Fixes: 3c514bf831ac ("iwlwifi: mvm: add a loose synchronization of the NSSN across Rx queues")
Signed-off-by: Naftali Goldstein <naftali.goldstein@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
The PHY is initialized during device initialization, but devices with
the tx_siso_diversity flag set need to send PHY_CONFIGURATION_CMD first,
otherwise the PHY would be reinitialized, causing a SYSASSERT.
To fix this, use a bit that tells the FW not to complete the PHY
initialization before a PHY_CONFIGURATION_CMD is received.
Signed-off-by: Haim Dreyfuss <haim.dreyfuss@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
We can't check for the ACPI table revision validity in the same if
where we check if the package was read correctly, because we return
PTR_ERR(pkg) and if the table is not valid but the pointer is, we
would return a valid pointer as an error. Fix that by moving the
table checks to a separate if and return -EINVAL if it's not valid.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
We copy cfg->trans to trans->trans_cfg at the very beginning, so don't
try to access it via cfg->trans anymore, because the cfg may be unset
in later cases.
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Fixes gcc '-Wunused-but-set-variable' warning:
drivers/net/wireless/realtek/rtlwifi/rtl8192ee/trx.c: In function rtl92ee_is_tx_desc_closed:
drivers/net/wireless/realtek/rtlwifi/rtl8192ee/trx.c:1005:18: warning: variable cur_tx_wp set but not used [-Wunused-but-set-variable]
It is not used since commit cf54622c8076 ("rtlwifi:
cleanup the code that check whether TX ring is available")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: zhengbin <zhengbin13@huawei.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Don't populate const arrays on the stack but instead make them
static. Makes the object code smaller by 60 bytes.
Before:
text data bss dec hex filename
15133 8768 0 23901 5d5d realtek/rtl8xxxu/rtl8xxxu_8192e.o
15209 6392 0 21601 5461 realtek/rtl8xxxu/rtl8xxxu_8723b.o
103254 31202 576 135032 20f78 realtek/rtl8xxxu/rtl8xxxu_core.o
After:
text data bss dec hex filename
14861 9024 0 23885 5d4d realtek/rtl8xxxu/rtl8xxxu_8192e.o
14953 6616 0 21569 5441 realtek/rtl8xxxu/rtl8xxxu_8723b.o
102986 31458 576 135020 20f6c realtek/rtl8xxxu/rtl8xxxu_core.o
(gcc version 9.2.1, amd64)
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Chris Chiu <chiu@endlessm.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Don't populate the array interval on the stack but instead make it
static. Makes the object code smaller by 121 bytes.
Before:
text data bss dec hex filename
167797 29676 448 197921 30521 wireless/intel/iwlegacy/common.o
After:
text data bss dec hex filename
167580 29772 448 197800 304a8 wireless/intel/iwlegacy/common.o
(gcc version 9.2.1, amd64)
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
The WARN_ON() macro doesn't take an error message, the argument is a
condition so this won't display the warning message.
Fixes: 27e117e4b01b ("rtw88: add deep power save support")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
The RTL8723BU suffers the wifi disconnection problem while bluetooth
device connected. While wifi is doing tx/rx, the bluetooth will scan
without results. This is due to the wifi and bluetooth share the same
single antenna for RF communication and they need to have a mechanism
to collaborate.
BT information is provided via the packet sent from co-processor to
host (C2H). It contains the status of BT but the rtl8723bu_handle_c2h
dose not really handle it. And there's no bluetooth coexistence
mechanism to deal with it.
This commit adds a workqueue to set the tdma configurations and
coefficient table per the parsed bluetooth link status and given
wifi connection state. The tdma/coef table comes from the vendor
driver code of the RTL8192EU and RTL8723BU. However, this commit is
only for single antenna scenario which RTL8192EU is default dual
antenna. The rtl8xxxu_parse_rxdesc24 which invokes the handle_c2h
is only for 8723b and 8192e so the mechanism is expected to work
on both chips with single antenna. Note RTL8192EU dual antenna is
not supported.
Signed-off-by: Chris Chiu <chiu@endlessm.com>
Signed-off-by: Jes Sorensen <Jes.Sorensen@gmail.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
In mwifiex_pcie_init_evt_ring, a new skb is allocated which should be
released if mwifiex_map_pci_memory() fails. The release for skb and
card->evtbd_ring_vbase is added.
Fixes: 0732484b47b5 ("mwifiex: separate ring initialization and ring creation routines")
Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com>
Acked-by: Ganapathi Bhat <gbhat@marvell.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
In mwifiex_pcie_alloc_cmdrsp_buf, a new skb is allocated which should be
released if mwifiex_map_pci_memory() fails. The release is added.
Fixes: fc3314609047 ("mwifiex: use pci_alloc/free_consistent APIs for PCIe")
Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com>
Acked-by: Ganapathi Bhat <gbhat@marvell.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
USB core will never call a USB-driver probe function with a NULL
device-id pointer.
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
This reverts commit f170d44bc4ec2feae5f6206980e7ae7fbf0432a0.
USB core will never call a USB-driver probe function with a NULL
device-id pointer.
Reverting before removing the existing checks in order to document this
and prevent the offending commit from being "autoselected" for stable.
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Fixes gcc '-Wunused-but-set-variable' warning:
drivers/net/wireless/realtek/rtlwifi/rtl8723com/fw_common.c: In function rtl8723_cmd_send_packet:
drivers/net/wireless/realtek/rtlwifi/rtl8723com/fw_common.c:226:5: warning: variable own set but not used [-Wunused-but-set-variable]
It is not used since commit f1d2b4d338bf ("rtlwifi:
rtl818x: Move drivers into new realtek directory")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: zhengbin <zhengbin13@huawei.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Fixes gcc '-Wunused-but-set-variable' warning:
drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtc8723b1ant.c: In function btc8723b1ant_tdma_dur_adj_for_acl:
drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtc8723b1ant.c:1428:7: warning: variable wifi_busy set but not used [-Wunused-but-set-variable]
drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtc8723b1ant.c: In function btc8723b1ant_tdma_dur_adj_for_acl:
drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtc8723b1ant.c:1427:22: warning: variable bt_info_ext set but not used [-Wunused-but-set-variable]
'wifi_busy' is not used since commit 158707f9584c ("rtlwifi:
btcoex: Restore 23b 1ant routine for tdma adjustment")
'bt_info_ext' is not used since commit 2622d7d86a57 ("rtlwifi:
btcoex: 23b 1ant: TDMA duration for ACL busy")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: zhengbin <zhengbin13@huawei.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Fixes gcc '-Wunused-but-set-variable' warning:
drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtc8192e2ant.c: In function btc8192e2ant_tdma_duration_adjust:
drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtc8192e2ant.c:1584:6: warning: variable result set but not used [-Wunused-but-set-variable]
It is not used since commit 27a31a60a4de ("rtlwifi:
btcoex: remove unused functions")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: zhengbin <zhengbin13@huawei.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Fixes gcc '-Wunused-but-set-variable' warning:
drivers/net/wireless/realtek/rtlwifi/rtl8188ee/dm.c: In function rtl88e_dm_pwdb_monitor:
drivers/net/wireless/realtek/rtlwifi/rtl8188ee/dm.c:763:6: warning: variable h2c_parameter set but not used [-Wunused-but-set-variable]
It is not used since commit f1d2b4d338bf ("rtlwifi:
rtl818x: Move drivers into new realtek directory")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: zhengbin <zhengbin13@huawei.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Fixes gcc '-Wunused-but-set-variable' warning:
drivers/net/wireless/realtek/rtlwifi/rtl8188ee/phy.c: In function phy_config_bb_with_pghdr:
drivers/net/wireless/realtek/rtlwifi/rtl8188ee/phy.c:652:22: warning: variable v3 set but not used [-Wunused-but-set-variable]
drivers/net/wireless/realtek/rtlwifi/rtl8188ee/phy.c: In function rtl88e_phy_config_rf_with_headerfile:
drivers/net/wireless/realtek/rtlwifi/rtl8188ee/phy.c:772:7: warning: variable rtstatus set but not used [-Wunused-but-set-variable]
drivers/net/wireless/realtek/rtlwifi/rtl8188ee/phy.c: In function rtl88e_phy_iq_calibrate:
drivers/net/wireless/realtek/rtlwifi/rtl8188ee/phy.c:1945:6: warning: variable reg_ecc set but not used [-Wunused-but-set-variable]
drivers/net/wireless/realtek/rtlwifi/rtl8188ee/phy.c: In function rtl88e_phy_iq_calibrate:
drivers/net/wireless/realtek/rtlwifi/rtl8188ee/phy.c:1944:61: warning: variable reg_ec4 set but not used [-Wunused-but-set-variable]
drivers/net/wireless/realtek/rtlwifi/rtl8188ee/phy.c: In function rtl88e_phy_iq_calibrate:
drivers/net/wireless/realtek/rtlwifi/rtl8188ee/phy.c:1944:34: warning: variable reg_eac set but not used [-Wunused-but-set-variable]
drivers/net/wireless/realtek/rtlwifi/rtl8188ee/phy.c: In function rtl88e_phy_iq_calibrate:
drivers/net/wireless/realtek/rtlwifi/rtl8188ee/phy.c:1943:19: warning: variable b_pathb_ok set but not used [-Wunused-but-set-variable]
They are not used since commit f1d2b4d338bf ("rtlwifi:
rtl818x: Move drivers into new realtek directory")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: zhengbin <zhengbin13@huawei.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Fixes gcc '-Wunused-but-set-variable' warning:
drivers/net/wireless/realtek/rtlwifi/rtl8192c/phy_common.c: In function rtl92c_phy_iq_calibrate:
drivers/net/wireless/realtek/rtlwifi/rtl8192c/phy_common.c:1373:6: warning: variable reg_ecc set but not used [-Wunused-but-set-variable]
drivers/net/wireless/realtek/rtlwifi/rtl8192c/phy_common.c: In function rtl92c_phy_iq_calibrate:
drivers/net/wireless/realtek/rtlwifi/rtl8192c/phy_common.c:1372:34: warning: variable reg_eac set but not used [-Wunused-but-set-variable]
They are not used since commit f1d2b4d338bf ("rtlwifi:
rtl818x: Move drivers into new realtek directory")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: zhengbin <zhengbin13@huawei.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Fixes gcc '-Wunused-but-set-variable' warning:
drivers/net/wireless/realtek/rtlwifi/rtl8723ae/phy.c: In function rtl8723e_phy_iq_calibrate:
drivers/net/wireless/realtek/rtlwifi/rtl8723ae/phy.c:1346:6: warning: variable reg_ecc set but not used [-Wunused-but-set-variable]
drivers/net/wireless/realtek/rtlwifi/rtl8723ae/phy.c: In function rtl8723e_phy_iq_calibrate:
drivers/net/wireless/realtek/rtlwifi/rtl8723ae/phy.c:1345:61: warning: variable reg_ec4 set but not used [-Wunused-but-set-variable]
drivers/net/wireless/realtek/rtlwifi/rtl8723ae/phy.c: In function rtl8723e_phy_iq_calibrate:
drivers/net/wireless/realtek/rtlwifi/rtl8723ae/phy.c:1345:34: warning: variable reg_eac set but not used [-Wunused-but-set-variable]
drivers/net/wireless/realtek/rtlwifi/rtl8723ae/phy.c: In function rtl8723e_phy_iq_calibrate:
drivers/net/wireless/realtek/rtlwifi/rtl8723ae/phy.c:1344:19: warning: variable b_pathb_ok set but not used [-Wunused-but-set-variable]
They are not used since commit f1d2b4d338bf ("rtlwifi:
rtl818x: Move drivers into new realtek directory")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: zhengbin <zhengbin13@huawei.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Fixes gcc '-Wunused-but-set-variable' warning:
drivers/net/wireless/realtek/rtlwifi/rtl8821ae/phy.c: In function rtl8812ae_phy_config_rf_with_headerfile:
drivers/net/wireless/realtek/rtlwifi/rtl8821ae/phy.c:2079:7: warning: variable rtstatus set but not used [-Wunused-but-set-variable]
drivers/net/wireless/realtek/rtlwifi/rtl8821ae/phy.c: In function rtl8821ae_phy_config_rf_with_headerfile:
drivers/net/wireless/realtek/rtlwifi/rtl8821ae/phy.c:2114:7: warning: variable rtstatus set but not used [-Wunused-but-set-variable]
drivers/net/wireless/realtek/rtlwifi/rtl8821ae/phy.c: In function _rtl8812ae_phy_get_txpower_limit:
drivers/net/wireless/realtek/rtlwifi/rtl8821ae/phy.c:2354:6: warning: variable bd set but not used [-Wunused-but-set-variable]
They are not used since commit f1d2b4d338bf ("rtlwifi:
rtl818x: Move drivers into new realtek directory")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: zhengbin <zhengbin13@huawei.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
We have 3 laptops which connect the wifi by the same RTL8723BU.
The PCI VID/PID of the wifi chip is 10EC:B720 which is supported.
They have the same problem with the in-kernel rtl8xxxu driver, the
iperf (as a client to an ethernet-connected server) gets ~1Mbps.
Nevertheless, the signal strength is reported as around -40dBm,
which is quite good. From the wireshark capture, the tx rate for each
data and qos data packet is only 1Mbps. Compare to the Realtek driver
at https://github.com/lwfinger/rtl8723bu, the same iperf test gets
~12Mbps or better. The signal strength is reported similarly around
-40dBm. That's why we want to improve.
After reading the source code of the rtl8xxxu driver and Realtek's, the
major difference is that Realtek's driver has a watchdog which will keep
monitoring the signal quality and updating the rate mask just like the
rtl8xxxu_gen2_update_rate_mask() does if signal quality changes.
And this kind of watchdog also exists in rtlwifi driver of some specific
chips, ex rtl8192ee, rtl8188ee, rtl8723ae, rtl8821ae...etc. They have
the same member function named dm_watchdog and will invoke the
corresponding dm_refresh_rate_adaptive_mask to adjust the tx rate
mask.
With this commit, the tx rate of each data and qos data packet will
be 39Mbps (MCS4) with the 0xF00000 as the tx rate mask. The 20th bit
to 23th bit means MCS4 to MCS7. It means that the firmware still picks
the lowest rate from the rate mask and explains why the tx rate of
data and qos data is always lowest 1Mbps because the default rate mask
passed is always 0xFFFFFFF ranges from the basic CCK rate, OFDM rate,
and MCS rate. However, with Realtek's driver, the tx rate observed from
wireshark under the same condition is almost 65Mbps or 72Mbps, which
indicating that rtl8xxxu could still be further improved.
Signed-off-by: Chris Chiu <chiu@endlessm.com>
Reviewed-by: Daniel Drake <drake@endlessm.com>
Acked-by: Jes Sorensen <Jes.Sorensen@gmail.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
The driver does not use input subsystem so we do not need this header,
and it is being removed, so stop pulling it in.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
The id pointer can be NULL in rsi_probe(). It is checked everywhere except
for the else branch in the idProduct condition. The patch adds NULL check
before the id dereference in the rsi_dbg() call.
Fixes: 54fdb318c111 ("rsi: add new device model for 9116")
Cc: Amitkumar Karwar <amitkarwar@gmail.com>
Cc: Siva Rebbagondla <siva8118@gmail.com>
Cc: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Denis Efremov <efremov@linux.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
The variable ret is being assigned a value that is never read and is
being re-assigned a little later on. The assignment is redundant and hence
can be removed.
Addresses-Coverity: ("Unused value")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
The firmware may have SAE authentication code built-in. This is
detected by the driver and indicated in the wiphy features flags.
User-space can use this flag to determine whether or not to provide
the password material for SAE authentication in the nl80211 CONNECT
command.
Signed-off-by: Chung-Hsien Hsu <stanley.hsu@cypress.com>
Signed-off-by: Chi-Hsien Lin <chi-hsien.lin@cypress.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Disable efuse if the efuse is enabled when we failed to setup the efuse
information, otherwise the hardware will not turn off.
Fixes: e3037485c68e ("rtw88: new Realtek 802.11ac driver")
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
8822C is a 2x2 11ac chip, and then NSS must be less or equal to 2. However,
current nss of hw cap is 3, likes
hw cap: hci=0x0f, bw=0x07, ptcl=0x03, ant_num=7, nss=3
This commit adds constraint to make sure NSS <= rf_path_num, and result
looks like
hw cap: hci=0x0f, bw=0x07, ptcl=0x03, ant_num=7, nss=2
Fixes: e3037485c68e ("rtw88: new Realtek 802.11ac driver")
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
This commit doesn't change logic at all, just use struct rtw_fw_hdr to
access fixed part of 64 bytes header. Since remaining part is variable
length data of actual firmware, we don't define them within the struct.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
It's better to print firmware version at load time.
But since we need to set debug_mask properly to default print
rtw_dbg(), raise the debug level to rtw_info() instead.
Also change the multiple line style to one line only, it will
be easier for log analyzing.
Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Set CWmax/CWmin, TXOP and AIFS according to ieee80211_tx_queue_params.
Do note that hardware has only one group of EDCA[ac] registers, if more
than one vif are added, the EDCA[ac] registers will contain value of
params of the most recent set by ieee80211_ops::conf_tx().
And AIFS = AIFSN[ac] * slot_time + SIFS, so if use_short_slot is changed,
need to also change AIFS.
Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
The value of GET_RX_DESC_SWDEC() indicates that if this RX
packet requires software decryption or not. And software
decryption is required when the packet was encrypted and the
hardware failed to decrypt it.
So, GET_RX_DESC_SWDEC() is negative does not mean that this
packet is decrypted, it might just have no encryption at all.
To actually see if the packet is decrypted, driver needs to
further check if the hardware has successfully decrypted it,
with a specific type of encryption algorithm.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
When downloading the reserved page, the first page always contains
a beacon for the firmware to reference. For non-beaconing modes such
as station mode, also put a blank skb with length=1.
And for the beaconing modes, driver will get a real beacon with a
length approximate to the page size. But as the beacon is always put
at the first page, it does not need a tx_desc, because the TX path
will generate one when TXing the reserved page to the hardware. So we
could allocate a buffer with a size smaller than the reserved page,
when using memcpy() to copy the content of reserved page to the buffer,
the over-sized reserved page will violate the kernel memory.
To fix it, add the tx_desc before memcpy() the reserved packets to
the buffer, then we can get SKBs with correct length when counting
the pages in total. And for page 0, count the extra tx_desc_sz that
the TX path will generate. This way, the first beacon that allocated
without tx_desc can be counted with the extra tx_desc_sz to get
actual pages it requires.
Fixes: e3037485c68e ("rtw88: new Realtek 802.11ac driver")
Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Sometimes mac80211 will ask us to flush the hardware queues.
To flush them, first we need to get the corresponding priority queues
from the RQPN mapping table.
Then we can check the available pages are equal to the originally
reserved pages, which means the hardware has returned all of the pages
it used to transmit.
Note that now we only check for 100 ms for the priority queue, but
sometimes if we have a lot of traffic (ex. 100Mbps up), some of the
packets could be dropped.
Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Based on the mac80211's TXQ implementation, TX-AMSDU can
be used to get higher MAC efficiency. To make mac80211
aggregate MSDUs, low level driver just need to leave skbs
in the TXQ, and mac80211 will try to aggregate them if
possible. As driver will schedule a tasklet when the TX
queue is woke, until the tasklet being served, there will
have some skbs in the queue if traffic is heavy.
Driver can control the max AMSDU size depending on the
current bit rate used by hardware/firmware. The higher
rates are used, the larger AMSDU size can be.
It is tested that can achieve higher T-Put at higher rates.
If the environment is relatively clean, and the bit_rate
is high enough, we can get about 80Mbps improvement.
For lower bit rates, not much gain can we get, so leave
the max_amsdu length low to prevent aggregation.
Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Whenever the firmware increases/decreases the bit rate used
to transmit to a peer, it sends an RA report through C2H to
driver. Driver can then record the bit rate in the peer's
struct rtw_sta_info, and report to mac80211 when it asks us
for the statistics of the sta by ieee80211_ops::sta_statistics
Signed-off-by: Tzu-En Huang <tehuang@realtek.com>
Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
We can indicate IEEE80211_HW_HAS_RATE_CONTROL to mac80211 because
the hardware has its own rate control algorithm. And what driver needs
to do is to choose an RA mask according the peer's capabilities.
But the hardware is not able to setup BA session by itself. So driver
requires to initiate tx BA session for hardware, and tells it if it is
possible to transmit AMPDU. The hardware can then aggregate MPDUs.
And the size of AMPDU is controlled by the TX descriptor and the
register value. Since the TX descriptor will reference the max AMPDU
size from ieee80211_sta::ht_cap::ampdu_factor, just set the register
value to 0x3f, and let it be controlled by TX descriptor.
Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
The mac80211 provides software TX queue for driver, as long as
driver has hooked ieee80211_ops::wake_tx_queue. Each time a
packet is queued onto the TX queue, that queue will be woken
up the inform driver to serve the queue.
Now driver only supports PCI interface ICs, there's no specific
traffic control for each queue, just schedule a tasklet, and
dump all of the packets at once to the DMA ring. Instead of TX
the packets whenever TX queue is woke, tasklet handler can have
more packets dumped to the device, takes advantage of burst
write with DMA engine.
And if the driver is going to support USB/SDIO ICs, the tasklet
can be more flexible for aggregating the packets, enhance the
efficiency of bandwidth usage.
Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Allows driver to send RTS by filling tx descriptor.
The user may want to set the rts threshold. But since we have not
been taking over rate control from mac80211 to driver by setting flag
IEEE80211_HW_HAS_RATE_CONTROL, there is nothing we can do about it.
So here just store the value, and mac80211 will tell us to use rts
protection by ieee80211_tx_info::control::use_rts.
Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Driver needs to wait for firmware to restore hardware setting
to active mode after leaving lps.
After getting H2C from driver for leaving lps, firmware will
issue null packet without PS bit to inform AP driver is active,
and then restore REG_TCR Register if AP has receiced null packet.
But the transmission of null packet may cost much more time
in noisy environment. If driver does not wait for firmware,
null packet with PS bit could be sent due to incorrect REG_TCR setting.
And AP will be confused.
In our test, 100ms is enough for firmware to send null packet
to AP. If REG_TCR Register is still wrong after 100ms, we will
modify it directly, force the PS bit to be cleared
Signed-off-by: Chin-Yen Lee <timlee@realtek.com>
Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
If dev_alloc_name fails, hwsim_mon's memory allocated in alloc_netdev
needs to be freed.
Change goto command in dev_alloc_name failure to out_free_mon in
order to perform free_netdev.
Signed-off-by: Michael Vassernis <michael.vassernis@tandemg.com>
Link: https://lore.kernel.org/r/20191003073049.3760-1-michael.vassernis@tandemg.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
There really is no need to make drivers call the
ieee80211_start_tx_ba_cb_irqsafe() function and then
schedule the worker if all we want is to set a bit.
Add a new return value (that was previously considered
invalid) to indicate that the driver is immediately
ready for the session, and make drivers use it. The
only drivers that remain different are the Intel ones
as they need to negotiate more with the firmware.
Link: https://lore.kernel.org/r/1570007543-I152912660131cbab2e5d80b4218238c20f8a06e5@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
memcpy() in wmi_set_ie() and wmi_update_ft_ies() is called with
src == NULL and len == 0. This is an undefined behavior. Fix it
by checking "ie_len > 0" before the memcpy() calls.
As suggested by GCC documentation:
"The pointers passed to memmove (and similar functions in <string.h>)
must be non-null even when nbytes==0, so GCC can use that information
to remove the check after the memmove call." [1]
[1] https://gcc.gnu.org/gcc-4.9/porting_to.html
Cc: Maya Erez <merez@codeaurora.org>
Cc: Kalle Valo <kvalo@codeaurora.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: stable@vger.kernel.org
Signed-off-by: Denis Efremov <efremov@linux.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
memcpy() call with "idata == NULL && ilen == 0" results in undefined
behavior in ar5523_cmd(). For example, NULL is passed in callchain
"ar5523_stat_work() -> ar5523_cmd_write() -> ar5523_cmd()". This patch
adds ilen check before memcpy() call in ar5523_cmd() to prevent an
undefined behavior.
Cc: Pontus Fuchs <pontus.fuchs@gmail.com>
Cc: Kalle Valo <kvalo@codeaurora.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: David Laight <David.Laight@ACULAB.COM>
Cc: stable@vger.kernel.org
Signed-off-by: Denis Efremov <efremov@linux.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>