IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Add support for the RK3588 to the driver. The RK3588 has four DDR
channels with a register stride of 0x4000 between the channel
registers, also it has a DDRMON_CTRL register per channel.
Link: https://lore.kernel.org/all/20231018061714.3553817-20-s.hauer@pengutronix.de/
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
The currently supported RK3399 has a set of registers per channel, but
it has only a single DDRMON_CTRL register. With upcoming RK3588 this
will be different, the RK3588 has a DDRMON_CTRL register per channel.
Instead of expecting a single DDRMON_CTRL register, loop over the
channels and write the channel specific DDRMON_CTRL register. Break
out early out of the loop when there is only a single DDRMON_CTRL
register like on the RK3399.
Link: https://lore.kernel.org/all/20231018061714.3553817-19-s.hauer@pengutronix.de/
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
The currently supported RK3399 has a stride of 20 between the channel
specific registers. Upcoming RK3588 has a different stride, so put
the stride into driver data to make it configurable.
While at it convert decimal 20 to hex 0x14 for consistency with RK3588
which has a register stride 0x4000 and we want to write that in hex
as well.
Link: https://lore.kernel.org/all/20231018061714.3553817-18-s.hauer@pengutronix.de/
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
The DFI is a unit which is suitable for measuring DDR utilization, but
so far it could only be used as an event driver for the DDR frequency
scaling driver. This adds perf support to the DFI driver.
Usage with the 'perf' tool can look like:
perf stat -a -e rockchip_ddr/cycles/,\
rockchip_ddr/read-bytes/,\
rockchip_ddr/write-bytes/,\
rockchip_ddr/bytes/ sleep 1
Performance counter stats for 'system wide':
1582524826 rockchip_ddr/cycles/
1802.25 MB rockchip_ddr/read-bytes/
1793.72 MB rockchip_ddr/write-bytes/
3595.90 MB rockchip_ddr/bytes/
1.014369709 seconds time elapsed
perf support has been tested on a RK3568 and a RK3399, the latter with
dual channel DDR.
Link: https://lore.kernel.org/all/20231019064819.3496740-1-s.hauer@pengutronix.de/
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
[cw00.choi: Fix typo from 'write_acccess' to 'write_access']
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
struct dmc_count_channel::total counts the clock cycles of the DDR
controller. Rename it accordingly to give the reader a better idea
what this is about. While at it, at some documentation to struct
dmc_count_channel.
Link: https://lore.kernel.org/all/20231018061714.3553817-16-s.hauer@pengutronix.de/
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
When adding perf support later the DFI must be enabled when
either of devfreq-event or perf is active. Prepare for that
by adding a usage counter for the DFI. Also move enabling
and disabling of the clock away from the devfreq-event specific
functions to which the perf specific part won't have access.
Link: https://lore.kernel.org/all/20231018061714.3553817-15-s.hauer@pengutronix.de/
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
The internal functions do not need the struct devfreq_event_dev *,
so pass them the struct rockchip_dfi *. This is a preparation for
adding perf support later which doesn't have a struct devfreq_event_dev *.
Link: https://lore.kernel.org/all/20231018061714.3553817-14-s.hauer@pengutronix.de/
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
In the DFI driver LPDDR4X can be handled in the same way as LPDDR4. Add
the missing case.
Link: https://lore.kernel.org/all/20231018061714.3553817-13-s.hauer@pengutronix.de/
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
According to the downstream driver the DDRMON_CTRL_LPDDR23 bit must be
set for both LPDDR2 and LPDDR3. Add the missing LPDDR2 case and while
at it turn the if/else if/else into switch/case which makes it easier
to read.
Link: https://lore.kernel.org/all/20231018061714.3553817-12-s.hauer@pengutronix.de/
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
This adds RK3568 support to the DFI driver. Only iniitialization
differs from the currently supported RK3399.
Link: https://lore.kernel.org/all/20231018061714.3553817-11-s.hauer@pengutronix.de/
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Use the HIWORD_UPDATE() define known from other rockchip drivers to
make the defines look less odd to the readers who've seen other
rockchip drivers.
The HIWORD registers have their functional bits in the lower 16 bits
whereas the upper 16 bits contain a mask. Only the functional bits that
have the corresponding mask bit set are modified during a write. Although
the register writes look different, the end result should be the same,
at least there's no functional change intended with this patch.
Link: https://lore.kernel.org/all/20231018061714.3553817-10-s.hauer@pengutronix.de/
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
The DDRTYPE defines are named to be RK3399 specific, but they can be
used for other Rockchip SoCs as well, so replace the RK3399_PMUGRF_
prefix with ROCKCHIP_. They are defined in a SoC specific header
file, so when generalizing the prefix also move the new defines to
a SoC agnostic header file. While at it use GENMASK to define the
DDRTYPE bitfield and give it a name including the full register name.
Link: https://lore.kernel.org/all/20231018061714.3553817-9-s.hauer@pengutronix.de/
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Different Rockchip SoC variants have a different number of channels.
Introduce a channel mask to make the number of channels configurable
from SoC initialization code.
Link: https://lore.kernel.org/all/20231018061714.3553817-8-s.hauer@pengutronix.de/
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
The DDR_MON counters are free running counters. These are resetted to 0
when starting them over like currently done when reading the current
counter values.
Resetting the counters becomes a problem with perf support we want to
add later, because perf needs counters that are not modified elsewhere.
This patch removes resetting the counters and keeps them running
instead. That means we no longer use the absolute counter values but
instead compare them with the counter values we read last time. Not
stopping the counters also has the impact that they are running while
we are reading them. We cannot read multiple timers atomically, so
the values do not exactly fit together. The effect should be negligible
though as the time between two measurements is some orders of magnitude
bigger than the time we need to read multiple registers.
Link: https://lore.kernel.org/all/20231018061714.3553817-7-s.hauer@pengutronix.de/
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Use preferred device_get_match_data() instead of of_match_device() to
get the driver match data. With this, adjust the includes to explicitly
include the correct headers.
Link: https://lore.kernel.org/all/20231006213854.333261-1-robh@kernel.org/
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
When adding perf support to the DFI driver the perf part will
need the raw counter values, so move the fixed * 4 factor to
rockchip_dfi_get_event().
Link: https://lore.kernel.org/lkml/20230704093242.583575-6-s.hauer@pengutronix.de/
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Move the RK3399 specifics to a SoC specific init function to make
the way free for supporting other SoCs later.
Link: https://lore.kernel.org/lkml/20230704093242.583575-5-s.hauer@pengutronix.de/
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
The variable name for the private data struct is 'info' in some
functions and 'data' in others. Both names do not give a clue what
type the variable has, so consistently use 'dfi'.
Link: https://lore.kernel.org/lkml/20230704093242.583575-4-s.hauer@pengutronix.de/
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
No need for an extra allocation, just embed the struct
devfreq_event_desc into the private data struct.
Link: https://lore.kernel.org/lkml/20230704093242.583575-3-s.hauer@pengutronix.de/
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
As a matter of fact the regmap_pmu already is mandatory because
it is used unconditionally in the driver. Bail out gracefully in
probe() rather than crashing later.
Link: https://lore.kernel.org/lkml/20230704093242.583575-2-s.hauer@pengutronix.de/
Fixes: b9d1262bca ("PM / devfreq: event: support rockchip dfi controller")
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Some devfreq consumers like UFS driver need to work with multiple clocks
through the OPP framework. For this reason, OPP framework exposes the
_indexed() APIs for finding the floor/ceil of the supplied frequency of
the indexed clock. So let's use them in the devfreq driver.
Currently, the clock index of 0 is used which works fine for multiple as
well as single clock.
Link: https://lore.kernel.org/all/20231003111232.42663-3-manivannan.sadhasivam@linaro.org/
Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
srcu_init_notifier_head() allocates resources that need to be released
with a srcu_cleanup_notifier_head() call.
Reported by kmemleak.
Fixes: 0fe3a66410 ("PM / devfreq: Add new DEVFREQ_TRANSITION_NOTIFIER notifier")
Cc: <stable@vger.kernel.org>
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Dhruva Gole <d-gole@ti.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Current kernel-doc comment doesn't specify the default timer used for the
load monitoring. Also, it uses the term "default delayed work" which could
be misunderstood as "default delayer timer". So reword the comment to
clearly specify the default timer and also reword the last sentence to make
it more understandable.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
The DT of_device.h and of_platform.h date back to the separate
of_platform_bus_type before it as merged into the regular platform bus.
As part of that merge prepping Arm DT support 13 years ago, they
"temporarily" include each other. They also include platform_device.h
and of.h. As a result, there's a pretty much random mix of those include
files used throughout the tree. In order to detangle these headers and
replace the implicit includes with struct declarations, users need to
explicitly include the correct includes.
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
smatch warning:
drivers/devfreq/mtk-cci-devfreq.c:135 mtk_ccifreq_target()
warn: variable dereferenced before check 'drv' (see line 130)
This is based on static analysis only. Compilation tested.
Signed-off-by: Sukrut Bellary <sukrut.bellary@linux.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Commit adf8238ef4 ("ARM: dts: exynos: move exynos-bus nodes out of soc
in Exynos4412") changed the order of the exynos-bus nodes, what results
in different probe order of the Exynos Bus devices. Although the driver
properly handles the deferred probe and all devices seems to be finally
properly registered, this change revealed some kind of a bug related to
PPMU counters registration and passive governor operation. Usually in 1
of 10 boots this results in complete board freeze during loading of the
kernel modules.
To avoid that freeze, ensure that the Exynos PPMU driver is already
loaded before the Exynos Bus driver starts probing.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Here is the large set of driver core changes for 6.4-rc1.
Once again, a busy development cycle, with lots of changes happening in
the driver core in the quest to be able to move "struct bus" and "struct
class" into read-only memory, a task now complete with these changes.
This will make the future rust interactions with the driver core more
"provably correct" as well as providing more obvious lifetime rules for
all busses and classes in the kernel.
The changes required for this did touch many individual classes and
busses as many callbacks were changed to take const * parameters
instead. All of these changes have been submitted to the various
subsystem maintainers, giving them plenty of time to review, and most of
them actually did so.
Other than those changes, included in here are a small set of other
things:
- kobject logging improvements
- cacheinfo improvements and updates
- obligatory fw_devlink updates and fixes
- documentation updates
- device property cleanups and const * changes
- firwmare loader dependency fixes.
All of these have been in linux-next for a while with no reported
problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZEp7Sw8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ykitQCfamUHpxGcKOAGuLXMotXNakTEsxgAoIquENm5
LEGadNS38k5fs+73UaxV
=7K4B
-----END PGP SIGNATURE-----
Merge tag 'driver-core-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here is the large set of driver core changes for 6.4-rc1.
Once again, a busy development cycle, with lots of changes happening
in the driver core in the quest to be able to move "struct bus" and
"struct class" into read-only memory, a task now complete with these
changes.
This will make the future rust interactions with the driver core more
"provably correct" as well as providing more obvious lifetime rules
for all busses and classes in the kernel.
The changes required for this did touch many individual classes and
busses as many callbacks were changed to take const * parameters
instead. All of these changes have been submitted to the various
subsystem maintainers, giving them plenty of time to review, and most
of them actually did so.
Other than those changes, included in here are a small set of other
things:
- kobject logging improvements
- cacheinfo improvements and updates
- obligatory fw_devlink updates and fixes
- documentation updates
- device property cleanups and const * changes
- firwmare loader dependency fixes.
All of these have been in linux-next for a while with no reported
problems"
* tag 'driver-core-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (120 commits)
device property: make device_property functions take const device *
driver core: update comments in device_rename()
driver core: Don't require dynamic_debug for initcall_debug probe timing
firmware_loader: rework crypto dependencies
firmware_loader: Strip off \n from customized path
zram: fix up permission for the hot_add sysfs file
cacheinfo: Add use_arch[|_cache]_info field/function
arch_topology: Remove early cacheinfo error message if -ENOENT
cacheinfo: Check cache properties are present in DT
cacheinfo: Check sib_leaf in cache_leaves_are_shared()
cacheinfo: Allow early level detection when DT/ACPI info is missing/broken
cacheinfo: Add arm64 early level initializer implementation
cacheinfo: Add arch specific early level initializer
tty: make tty_class a static const structure
driver core: class: remove struct class_interface * from callbacks
driver core: class: mark the struct class in struct class_interface constant
driver core: class: make class_register() take a const *
driver core: class: mark class_release() as taking a const *
driver core: remove incorrect comment for device_create*
MIPS: vpe-cmp: remove module owner pointer from struct class usage.
...
According to commit 890cc39a87 ("drivers: provide
devm_platform_get_and_ioremap_resource()"), convert
platform_get_resource(), devm_ioremap_resource() to a single
call to devm_platform_get_and_ioremap_resource(), as this is exactly
what this function does.
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
The module pointer in class_create() never actually did anything, and it
shouldn't have been requred to be set as a parameter even if it did
something. So just remove it and fix up all callers of the function in
the kernel tree at the same time.
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Link: https://lore.kernel.org/r/20230313181843.1207845-4-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
It is preferred to use typed property access functions (i.e.
of_property_read_<type> functions) rather than low-level
of_get_property/of_find_property functions for reading properties. As
part of this, convert of_get_property/of_find_property calls to the
recently added of_property_present() helper when we just want to test
for presence of a property and nothing more.
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
The driver can match only via the DT table so the table should be always
used and the of_match_ptr does not have any sense (this also allows ACPI
matching via PRP0001, even though it might not be relevant here).
drivers/devfreq/exynos-bus.c:504:34: error: ‘exynos_bus_of_match’ defined but not used [-Werror=unused-const-variable=]
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Now that the SRCU Kconfig option is unconditionally selected, there is
no longer any point in selecting it. Therefore, remove the "select SRCU"
Kconfig statements.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Convert platform_get_resource(), devm_ioremap_resource() to a single
call to devm_platform_get_and_ioremap_resource(), as this is exactly
what this function does.
Signed-off-by: Minghao Chi <chi.minghao@zte.com.cn>
Signed-off-by: ye xingchen <ye.xingchen@zte.com.cn>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Replace the open-code with device_match_of_node().
Signed-off-by: ye xingchen <ye.xingchen@zte.com.cn>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Replace the open-code with device_match_of_node().
Signed-off-by: ye xingchen <ye.xingchen@zte.com.cn>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
The member void *data in the structure devfreq can be overwrite
by governor_userspace. For example:
1. The device driver assigned the devfreq governor to simple_ondemand
by the function devfreq_add_device() and init the devfreq member
void *data to a pointer of a static structure devfreq_simple_ondemand_data
by the function devfreq_add_device().
2. The user changed the devfreq governor to userspace by the command
"echo userspace > /sys/class/devfreq/.../governor".
3. The governor userspace alloced a dynamic memory for the struct
userspace_data and assigend the member void *data of devfreq to
this memory by the function userspace_init().
4. The user changed the devfreq governor back to simple_ondemand
by the command "echo simple_ondemand > /sys/class/devfreq/.../governor".
5. The governor userspace exited and assigned the member void *data
in the structure devfreq to NULL by the function userspace_exit().
6. The governor simple_ondemand fetched the static information of
devfreq_simple_ondemand_data in the function
devfreq_simple_ondemand_func() but the member void *data of devfreq was
assigned to NULL by the function userspace_exit().
7. The information of upthreshold and downdifferential is lost
and the governor simple_ondemand can't work correctly.
The member void *data in the structure devfreq is designed for
a static pointer used in a governor and inited by the function
devfreq_add_device(). This patch add an element named governor_data
in the devfreq structure which can be used by a governor(E.g userspace)
who want to assign a private data to do some private things.
Fixes: ce26c5bb95 ("PM / devfreq: Add basic governors")
Cc: stable@vger.kernel.org # 5.10+
Reviewed-by: Chanwoo Choi <cwchoi00@gmail.com>
Acked-by: MyungJoo Ham <myungjoo.ham@samsung.com>
Signed-off-by: Kant Fan <kant@allwinnertech.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
There is a typo in the message. The clock name should be 'pclk_ddr_mon'.
Fix it.
While at it, switch to dev_err_probe() which is less verbose, filters
-EPROBE_DEFER, and log the error code in a human readable way.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
If the regulator_get_optional() call for the SRAM regulator returns
a probe deferral, we must bail out and retry probing later: failing
to do this will produce unstabilities on platforms requiring the
handling for this regulator.
Fixes: b615b00c42da ("PM / devfreq: mediatek: Introduce MediaTek CCI devfreq driver")
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
- Fix return error code in mtk_cpu_dvfs_info_init (Yang Yingliang).
- Minor cleanups and support for new boards for Qcom cpufreq drivers
(Bryan O'Donoghue, Konrad Dybcio, Pierre Gondois, and Yicong Yang).
- Fix sparse warnings for Tegra cpufreq driver (Viresh Kumar).
- Make dev_pm_opp_set_regulators() accept NULL terminated list (Viresh
Kumar).
- Add dev_pm_opp_set_config() and friends and migrate other users and
helpers to using them (Viresh Kumar).
- Add support for multiple clocks for a device (Viresh Kumar and
Krzysztof Kozlowski).
- Configure resources before adding OPP table for Venus (Stanimir
Varbanov).
- Keep reference count up for opp->np and opp_table->np while they are
still in use (Liang He).
- Minor OPP cleanups (Viresh Kumar and Yang Li).
- Add a trace event for cpuidle to track missed (too deep or too
shallow) wakeups (Kajetan Puchalski).
-----BEGIN PGP SIGNATURE-----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=LBb0
-----END PGP SIGNATURE-----
Merge tag 'pm-5.20-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull more power management updates from Rafael Wysocki:
"These are ARM cpufreq updates and operating performance points (OPP)
updates plus one cpuidle update adding a new trace point.
Specifics:
- Fix return error code in mtk_cpu_dvfs_info_init (Yang Yingliang).
- Minor cleanups and support for new boards for Qcom cpufreq drivers
(Bryan O'Donoghue, Konrad Dybcio, Pierre Gondois, and Yicong Yang).
- Fix sparse warnings for Tegra cpufreq driver (Viresh Kumar).
- Make dev_pm_opp_set_regulators() accept NULL terminated list
(Viresh Kumar).
- Add dev_pm_opp_set_config() and friends and migrate other users and
helpers to using them (Viresh Kumar).
- Add support for multiple clocks for a device (Viresh Kumar and
Krzysztof Kozlowski).
- Configure resources before adding OPP table for Venus (Stanimir
Varbanov).
- Keep reference count up for opp->np and opp_table->np while they
are still in use (Liang He).
- Minor OPP cleanups (Viresh Kumar and Yang Li).
- Add a trace event for cpuidle to track missed (too deep or too
shallow) wakeups (Kajetan Puchalski)"
* tag 'pm-5.20-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (55 commits)
cpuidle: Add cpu_idle_miss trace event
venus: pm_helpers: Fix warning in OPP during probe
OPP: Don't drop opp->np reference while it is still in use
OPP: Don't drop opp_table->np reference while it is still in use
cpufreq: tegra194: Staticize struct tegra_cpufreq_soc instances
dt-bindings: cpufreq: cpufreq-qcom-hw: Add SM6375 compatible
dt-bindings: opp: Add msm8939 to the compatible list
dt-bindings: opp: Add missing compat devices
dt-bindings: opp: opp-v2-kryo-cpu: Fix example binding checks
cpufreq: Change order of online() CB and policy->cpus modification
cpufreq: qcom-hw: Remove deprecated irq_set_affinity_hint() call
cpufreq: qcom-hw: Disable LMH irq when disabling policy
cpufreq: qcom-hw: Reset cancel_throttle when policy is re-enabled
cpufreq: qcom-cpufreq-hw: use HZ_PER_KHZ macro in units.h
cpufreq: mediatek: fix error return code in mtk_cpu_dvfs_info_init()
OPP: Remove dev{m}_pm_opp_of_add_table_noclk()
PM / devfreq: tegra30: Register config_clks helper
OPP: Allow config_clks helper for single clk case
OPP: Provide a simple implementation to configure multiple clocks
OPP: Assert clk_count == 1 for single clk helpers
...
Here is the large set of char and misc and other driver subsystem
changes for 6.0-rc1.
Highlights include:
- large set of IIO driver updates, additions, and cleanups
- new habanalabs device support added (loads of register maps
much like GPUs have)
- soundwire driver updates
- phy driver updates
- slimbus driver updates
- tiny virt driver fixes and updates
- misc driver fixes and updates
- interconnect driver updates
- hwtracing driver updates
- fpga driver updates
- extcon driver updates
- firmware driver updates
- counter driver update
- mhi driver fixes and updates
- binder driver fixes and updates
- speakup driver fixes
Full details are in the long shortlog contents.
All of these have been in linux-next for a while without any reported
problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYup9QQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ylBKQCfaSuzl9ZP9dTvAw2FPp14oRqXnpoAnicvWAoq
1vU9Vtq2c73uBVLdZm4m
=AwP3
-----END PGP SIGNATURE-----
Merge tag 'char-misc-6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char / misc driver updates from Greg KH:
"Here is the large set of char and misc and other driver subsystem
changes for 6.0-rc1.
Highlights include:
- large set of IIO driver updates, additions, and cleanups
- new habanalabs device support added (loads of register maps much
like GPUs have)
- soundwire driver updates
- phy driver updates
- slimbus driver updates
- tiny virt driver fixes and updates
- misc driver fixes and updates
- interconnect driver updates
- hwtracing driver updates
- fpga driver updates
- extcon driver updates
- firmware driver updates
- counter driver update
- mhi driver fixes and updates
- binder driver fixes and updates
- speakup driver fixes
All of these have been in linux-next for a while without any reported
problems"
* tag 'char-misc-6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (634 commits)
drivers: lkdtm: fix clang -Wformat warning
char: remove VR41XX related char driver
misc: Mark MICROCODE_MINOR unused
spmi: trace: fix stack-out-of-bound access in SPMI tracing functions
dt-bindings: iio: adc: Add compatible for MT8188
iio: light: isl29028: Fix the warning in isl29028_remove()
iio: accel: sca3300: Extend the trigger buffer from 16 to 32 bytes
iio: fix iio_format_avail_range() printing for none IIO_VAL_INT
iio: adc: max1027: unlock on error path in max1027_read_single_value()
iio: proximity: sx9324: add empty line in front of bullet list
iio: magnetometer: hmc5843: Remove duplicate 'the'
iio: magn: yas530: Use DEFINE_RUNTIME_DEV_PM_OPS() and pm_ptr() macros
iio: magnetometer: ak8974: Use DEFINE_RUNTIME_DEV_PM_OPS() and pm_ptr() macros
iio: light: veml6030: Use DEFINE_RUNTIME_DEV_PM_OPS() and pm_ptr() macros
iio: light: vcnl4035: Use DEFINE_RUNTIME_DEV_PM_OPS() and pm_ptr() macros
iio: light: vcnl4000: Use DEFINE_RUNTIME_DEV_PM_OPS() and pm_ptr() macros
iio: light: tsl2591: Use DEFINE_RUNTIME_DEV_PM_OPS() and pm_ptr()
iio: light: tsl2583: Use DEFINE_RUNTIME_DEV_PM_OPS and pm_ptr()
iio: light: isl29028: Use DEFINE_RUNTIME_DEV_PM_OPS() and pm_ptr()
iio: light: gp2ap002: Switch to DEFINE_RUNTIME_DEV_PM_OPS and pm_ptr()
...
- Make dev_pm_opp_set_regulators() accept NULL terminated list (Viresh
Kumar).
- Add dev_pm_opp_set_config() and friends and migrate other
users/helpers to using them (Viresh Kumar).
- Add support for multiple clocks for a device (Viresh Kumar and
Krzysztof Kozlowski).
- Configure resources before adding OPP table for Venus (Stanimir
Varbanov).
- Keep reference count up for opp->np and opp_table->np while they are
still in use (Liang He).
- Minor cleanups (Viresh Kumar and Yang Li).
-----BEGIN PGP SIGNATURE-----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=NHBQ
-----END PGP SIGNATURE-----
Merge tag 'opp-updates-5.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm
Pull operating performance points (OPP) updates for 5.20-rc1 from Viresh
Kumar:
"- Make dev_pm_opp_set_regulators() accept NULL terminated list (Viresh
Kumar).
- Add dev_pm_opp_set_config() and friends and migrate other
users/helpers to using them (Viresh Kumar).
- Add support for multiple clocks for a device (Viresh Kumar and
Krzysztof Kozlowski).
- Configure resources before adding OPP table for Venus (Stanimir
Varbanov).
- Keep reference count up for opp->np and opp_table->np while they are
still in use (Liang He).
- Minor cleanups (Viresh Kumar and Yang Li)."
* tag 'opp-updates-5.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm: (43 commits)
venus: pm_helpers: Fix warning in OPP during probe
OPP: Don't drop opp->np reference while it is still in use
OPP: Don't drop opp_table->np reference while it is still in use
OPP: Remove dev{m}_pm_opp_of_add_table_noclk()
PM / devfreq: tegra30: Register config_clks helper
OPP: Allow config_clks helper for single clk case
OPP: Provide a simple implementation to configure multiple clocks
OPP: Assert clk_count == 1 for single clk helpers
OPP: Add key specific assert() method to key finding helpers
OPP: Compare bandwidths for all paths in _opp_compare_key()
OPP: Allow multiple clocks for a device
dt-bindings: opp: accept array of frequencies
OPP: Make dev_pm_opp_set_opp() independent of frequency
OPP: Reuse _opp_compare_key() in _opp_add_static_v2()
OPP: Remove rate_not_available parameter to _opp_add()
OPP: Use consistent names for OPP table instances
OPP: Use generic key finding helpers for bandwidth key
OPP: Use generic key finding helpers for level key
OPP: Add generic key finding helpers and use them for freq APIs
OPP: Remove dev_pm_opp_find_freq_ceil_by_volt()
...
Here are the interconnect changes for the 5.20-rc1 merge window consisting
of two new drivers, misc driver improvements and new device managed API.
Core change:
- Add device managed bulk API
Driver changes:
- New driver for NXP i.MX8MP platforms
- New driver for Qualcomm SM6350 platforms
- Multiple bucket support for Qualcomm RPM-based drivers.
Signed-off-by: Georgi Djakov <djakov@kernel.org>
-----BEGIN PGP SIGNATURE-----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=VTig
-----END PGP SIGNATURE-----
Merge tag 'icc-5.20-rc1-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/djakov/icc into char-misc-next
Georgi writes:
interconnect changes for 5.20
Here are the interconnect changes for the 5.20-rc1 merge window consisting
of two new drivers, misc driver improvements and new device managed API.
Core change:
- Add device managed bulk API
Driver changes:
- New driver for NXP i.MX8MP platforms
- New driver for Qualcomm SM6350 platforms
- Multiple bucket support for Qualcomm RPM-based drivers.
Signed-off-by: Georgi Djakov <djakov@kernel.org>
* tag 'icc-5.20-rc1-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/djakov/icc:
PM / devfreq: imx: Register i.MX8MP interconnect device
interconnect: imx: Add platform driver for imx8mp
interconnect: imx: configure NoC mode/prioriry/ext_control
interconnect: imx: introduce imx_icc_provider
interconnect: imx: set src node
interconnect: imx: fix max_node_id
interconnect: qcom: icc-rpm: Set bandwidth and clock for bucket values
interconnect: qcom: icc-rpm: Support multiple buckets
interconnect: qcom: icc-rpm: Change to use qcom_icc_xlate_extended()
interconnect: qcom: Move qcom_icc_xlate_extended() to a common file
dt-bindings: interconnect: Update property for icc-rpm path tag
interconnect: icc-rpm: Set destination bandwidth as well as source bandwidth
interconnect: qcom: msm8939: Use icc_sync_state
interconnect: add device managed bulk API
dt-bindings: interconnect: add fsl,imx8mp.h
dt-bindings: interconnect: imx8m: Add bindings for imx8mp noc
interconnect: qcom: Add SM6350 driver support
dt-bindings: interconnect: Add Qualcomm SM6350 NoC support
dt-bindings: interconnect: qcom: Split out rpmh-common bindings
interconnect: qcom: icc-rpmh: Support child NoC device probe
Same to i.MX8MM/N/Q, register i.MX8MP interconnect device to make
i.MX8MP Interconnect driver work.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
Link: https://lore.kernel.org/r/20220703091132.1412063-10-peng.fan@oss.nxp.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
It's difficult to notice that driver failed to probe by looking at KMSG
when devm_devfreq_add_device() fails. Add explicit error message for this
case.
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
The 3rd argument to the function of_get_property is a pointer and it is
being passed using 0. Use NULL instead.
Cleans up sparse warning:
warning: Using plain integer as NULL pointer
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
There are 4 warnings there:
drivers/devfreq/devfreq.c:707: warning: Function parameter or member 'val' not described in 'qos_min_notifier_call'
drivers/devfreq/devfreq.c:707: warning: Function parameter or member 'ptr' not described in 'qos_min_notifier_call'
drivers/devfreq/devfreq.c:717: warning: Function parameter or member 'val' not described in 'qos_max_notifier_call'
drivers/devfreq/devfreq.c:717: warning: Function parameter or member 'ptr' not described in 'qos_max_notifier_call'
It turns that neither val nor ptr are actually used on those
function, so document as such.
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
We introduce a devfreq driver for the MediaTek Cache Coherent Interconnect
(CCI) used by some MediaTek SoCs.
In this driver, we use the passive devfreq driver to get target frequencies
and adjust voltages accordingly. In MT8183 and MT8186, the MediaTek CCI
is supplied by the same regulators with the little core CPUs.
Signed-off-by: Jia-Wei Chang <jia-wei.chang@mediatek.com>
Signed-off-by: Johnson Wang <johnson.wang@mediatek.com>
Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
Tested-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
There is a corner case with Tegra30, where we want to skip clk
configuration that happens via dev_pm_opp_set_opp(), but still want the
OPP core to read the "opp-hz" property so we can find the right OPP via
freq finding helpers.
The OPP core provides support for the platforms to provide config_clks
helpers now, lets use that instead of devm_pm_opp_of_add_table_noclk()
to achieve the same result, as the OPP core won't parse the DT's
"opp-hz" property anymore if the clock isn't provided.
Tested-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
