IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
To save power, gate/reset the hardware block while the system is
asleep or powered off.
Acked-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Samuel Holland <samuel@sholland.org>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
In preparation for adding suspend/resume hooks, factor out the hardware
initialization from the driver probe/remove functions.
The timeout programmed during init is taken from the `struct rc_dev` so
it is maintained across an exit/init cycle.
This resolves some trivial issues with the probe function: throwing away
the error from clk_prepare_enable and using the wrong type for the
temporary register value.
It also fixes the order of the remove function to unregister the RC
device before turning off the hardware. This prevents userspace from
triggering register writes (via LIRC_SET_REC_TIMEOUT) while the hardware
is disabled.
Acked-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Samuel Holland <samuel@sholland.org>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Only one register, SUNXI_IR_CIR_REG, is accessed from outside the
interrupt handler, and that register is not accessed from inside it.
As there is no overlap between different contexts, no lock is needed.
Acked-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Samuel Holland <samuel@sholland.org>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The register writes during driver removal occur after the device is
already put back in reset, so they never had any effect.
Acked-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Samuel Holland <samuel@sholland.org>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Currently on platforms designed for Windows, connections between CIO2 and
sensors are not properly defined in DSDT. This patch extends the ipu3-cio2
driver to compensate by building software_node connections, parsing the
connection properties from the sensor's SSDB buffer.
[Sakari Ailus: Make cio2_bridge_init static inline to a fix compiler
warning, wrapped a bunch of long lines.]
Suggested-by: Jordan Hand <jorhand@linux.microsoft.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Daniel Scally <djrscally@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
V4L2 fwnode bus types are enumerated in v4l2-fwnode.c, meaning they aren't
available to the rest of the kernel. Move the enum to the corresponding
header so that I can use the label to refer to those values.
Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Daniel Scally <djrscally@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Where the fwnode graph is comprised of software_nodes, these will be
assigned as the secondary to dev->fwnode. Check the v4l2_subdev's fwnode
for a secondary and attempt to match against it during match_fwnode() to
accommodate that possibility.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Daniel Scally <djrscally@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
ipu3-cio2 driver needs extending with multiple files; rename the main
source file and specify the renamed file in Makefile to accommodate that.
Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Daniel Scally <djrscally@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Add headers that ipu3-cio2.h is direct user of.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Daniel Scally <djrscally@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
This solves a few minor cosmetic issues picked up by checkpatch for
the OV5648 and OV8865 drivers.
Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
This driver can use the replacement API instead of calling
of_match_device() and then dereferencing the pointer that is returned.
This nicely avoids referencing the match table when it is undefined with
configurations where CONFIG_OF=n.
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Acked-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Acked-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Jacopo Mondi <jacopo@jmondi.org>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Frank Rowand <frowand.list@gmail.com>
Cc: <linux-media@vger.kernel.org>
Cc: <linux-renesas-soc@vger.kernel.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210123034428.2841052-2-swboyd@chromium.org
The driver core ignores the return value of the remove callback, so
don't give isa drivers the chance to provide a value.
Adapt all isa_drivers with a remove callbacks accordingly; they all
return 0 unconditionally anyhow.
Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> # for drivers/net/can/sja1000/tscan1.c
Acked-by: William Breathitt Gray <vilhelm.gray@gmail.com>
Acked-by: Wolfram Sang <wsa@kernel.org> # for drivers/i2c/
Reviewed-by: Takashi Iway <tiwai@suse.de> # for sound/
Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> # for drivers/media/
Signed-off-by: Uwe Kleine-König <uwe@kleine-koenig.org>
Link: https://lore.kernel.org/r/20210122092449.426097-4-uwe@kleine-koenig.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Instead of an unconditional return 0, return no value. One of the two
callers ignored the return value already before.
This simplifies the next patch.
Signed-off-by: Uwe Kleine-König <uwe@kleine-koenig.org>
Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Link: https://lore.kernel.org/r/20210122092449.426097-3-uwe@kleine-koenig.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The asd allocated with v4l2_async_notifier_add_fwnode_subdev() must be
of size cal_v4l2_async_subdev, otherwise access to
cal_v4l2_async_subdev->phy will go to unallocated memory.
Fixes: 8fcb7576ad19 ("media: ti-vpe: cal: Allow multiple contexts per subdev notifier")
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Fix the following sparse warning:
drivers/media/platform/ti-vpe/cal-camerarx.c:783:32: warning: symbol 'cal_camerarx_media_ops' was not declared. Should it be static?
Signed-off-by: Zou Wei <zou_wei@huawei.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Add support for base layer priority ID control in encoder.
This is a preparation patch to support v6.
[hverkuil: changed 54 to 51 in v4l2_ctrl_handler_init]
Signed-off-by: Dikshita Agarwal <dikshita@codeaurora.org>
Acked-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
This control indicates the priority id to be applied
to base layer.
[hverkuil: renumbered V4L2_CID_MPEG_VIDEO_BASELAYER_PRIORITY_ID]
Signed-off-by: Dikshita Agarwal <dikshita@codeaurora.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Add support for frame type specific min and max qp controls
for encoder.
This is a preparation patch to support v6.
Signed-off-by: Dikshita Agarwal <dikshita@codeaurora.org>
Acked-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Adds bitrate control for all coding layers for h264
same as hevc.
Signed-off-by: Dikshita Agarwal <dikshita@codeaurora.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
- Adds min/max qp controls for B frame for h264.
- Adds min/max qp controls for I/P/B frames for hevc similar to h264.
- Update valid range of min/max qp for hevc to accommodate 10 bit.
Signed-off-by: Dikshita Agarwal <dikshita@codeaurora.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
GCC with W=2 level of kernel compiler warnings warns about the use of
uninitialised variables in a few locations. While these uninitialised
variables were not used in reality, this still produced compiler warnings.
Address this by assigning the variables to NULL and checking for NULL in
places it is not expected, returning -EIO in that case. This provides
at least some sanity checking at runtime as the compiler appears unable to
do that at compile time.
Reported-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
When processing a MCE_RSP_GETPORTSTATUS command, the bit index to set in
ir->txports_cabled comes from response data, and isn't validated.
As ir->txports_cabled is a u8, nothing should be done if the bit index
is greater than 7.
Cc: stable@vger.kernel.org
Reported-by: syzbot+ec3b3128c576e109171d@syzkaller.appspotmail.com
Signed-off-by: James Reynolds <jr@memlen.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
This device is also supported.
Cc: stable@vger.kernel.org
Tested-by: Georgi Bakalski <georgi.bakalski@gmail.com>
Reported-by: Georgi Bakalski <georgi.bakalski@gmail.com>
Signed-off-by: Sean Young <sean@mess.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Now when everything is in place wire up buffer requirements
from hfi platform buffers to the buffer requirements helper.
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Handle progressive/interlaced bitstream event by similar way as
bit depth.
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Wire up hfi platform codec and capabilities instead of
getting them from firmware.
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Add a new file for hfi platform buffer size and count calculations
for v6.
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
>From Venus v6 and beyond the buffer size and count have to be
calculated in the v4l2 driver instead of getting them from
firmware.
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Starting from v6 we have one more hfi property which will be needed
to calculate buffer sizes/count for particular codec and session type.
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Add ops to get the supported by the platform codecs and capabilities.
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Now when we have hfi platform make venus capabilities an
hfi platform capabilities.
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Introduce a new hfi platform to cover differences between hfi
versions. As a start move vpp/vsp freq data in that hfi
platform, more platform data will come later.
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The core caps are filled but not used, delete them. In case we
need them we can re-introduce.
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Skip calculating instance frequency if it is not in running state.
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
For resolutions below 720p the size of the compressed buffer must
be bigger. Correct this by checking the resolution when calculating
buffer size and multiply by eight.
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The hfi_session_init can be called many times and it returns
EINVAL when the session was already initialized. This error code
(EINVAL) is confusing for the callers. Change hfi_session_init to
return EALREADY error code when the session has been already
initialized.
Tested-by: Fritz Koenig <frkoenig@chromium.org>
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
For synchronous commands, update the message queue variable.
This would inform video firmware to raise interrupt on host
CPU whenever there is a response for such commands.
Signed-off-by: Vikash Garodia <vgarodia@codeaurora.org>
Tested-by: Fritz Koenig <frkoenig@chromium.org>
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Currently we rely on firmware to return error when we reach the maximum
supported number of sessions. But this errors are happened at reqbuf
time which is a bit later. The more reasonable way looks like is to
return the error on driver open.
To achieve that modify hfi_session_create to return error when we reach
maximum count of sessions and thus refuse open.
Tested-by: Fritz Koenig <frkoenig@chromium.org>
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Init the hfi session only once in queue_setup and also cover that
with inst->lock.
Tested-by: Fritz Koenig <frkoenig@chromium.org>
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
If the DRC is near the end of the stream the client
may send a V4L2_DEC_CMD_STOP before the DRC occurs.
V4L2_DEC_CMD_STOP puts the driver into the
VENUS_DEC_STATE_DRAIN state. DRC must be aware so
that after the DRC event the state can be restored
correctly.
Signed-off-by: Fritz Koenig <frkoenig@chromium.org>
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
DRC events can happen virtually at anytime, including when we are
starting a seek. Should this happen, we must make sure to return to the
DRC state, otherwise the firmware will expect buffers of the new
resolution whereas userspace will still work with the old one.
Returning to the DRC state upon resume for seeking makes sure that the
client will get the DRC event and will reallocate the buffers to fit the
firmware's expectations.
Signed-off-by: Alexandre Courbot <acourbot@chromium.org>
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
After adding more logic in vdec buf_queue vb2 op it is not
practical to have two lock/unlock for one decoder buf_queue.
So move the instance lock in encoder and decoder vb2 buf_queue
operations.
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
This makes the decoder to behaives equally for sufficient and
insufficient events. After this change the LAST buffer flag will be set
when the new resolution (in dynamic-resolution-change state) is smaller
then the old bitstream resolution.
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
In real use of dynamic-resolution-change it is observed that the
LAST buffer flag (which marks the last decoded buffer with the
resolution before the resolution-change event) is not reliably set.
Fix this by set the LAST buffer flag on next queued capture buffer
after the resolution-change event.
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
This driver uses the SG vb2 ops, but effectively only ever accesses the
first entry of the SG table, indicating that it expects a flat layout.
Switch it to use the contiguous ops to make sure this expected invariant
is always enforced. Since the device is supposed to be behind an IOMMU
this should have little to none practical consequences beyond making the
driver not rely on a particular behavior of the SG implementation.
Reported-by: Tomasz Figa <tfiga@chromium.org>
Signed-off-by: Alexandre Courbot <acourbot@chromium.org>
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
