IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
These are recently merged drivers for ASPEED systems.
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Joel Stanley <joel@jms.id.au>
This driver option is used by the AST2600 A0 boards to work around a
hardware issue.
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Pull ARM cpufreq drivers updates for v5.5 from Viresh Kumar:
"This pull request contains:
- Updates to ti-cpufreq driver and DT files to support new platforms
and migrate from opp-v1 bindings to opp-v2 bindings (H. Nikolaus
Schaller and Adam Ford).
- Merging of arm_big_little and vexpress-spc drivers and related
cleanup (Sudeep Holla).
- Fix for imx's default speed grade value (Anson Huang).
- Minor cleanup patch for s3c64xx (Nathan Chancellor).
- Fix CPU speed bin detection for sun50i (Ondrej Jirman)."
* 'cpufreq/arm/linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm:
cpufreq: sun50i: Fix CPU speed bin detection
cpufreq: vexpress-spc: find and skip duplicates when merging frequencies
cpufreq: vexpress-spc: use macros instead of hardcoded values for cluster ids
cpufreq: s3c64xx: Remove pointless NULL check in s3c64xx_cpufreq_driver_init
cpufreq: imx-cpufreq-dt: Correct i.MX8MN's default speed grade value
cpufreq: vexpress-spc: fix some coding style issues
cpufreq: vexpress-spc: remove lots of debug messages
cpufreq: vexpress-spc: drop unnessary cpufreq_arm_bL_ops abstraction
cpufreq: merge arm_big_little and vexpress-spc
cpufreq: scpi: remove stale/outdated comment about the driver
ARM: dts: Add OPP-V2 table for AM3517
cpufreq: ti-cpufreq: Add support for AM3517
ARM: dts: omap36xx: using OPP1G needs to control the abb_ldo
cpufreq: ti-cpufreq: omap36xx use "cpu0","vbb" if run in multi_regulator mode
ARM: dts: omap3: bulk convert compatible to be explicitly ti,omap3430 or ti,omap3630 or ti,am3517
DTS: bindings: omap: update bindings documentation
ARM: dts: omap34xx & omap36xx: replace opp-v1 tables by opp-v2 for
cpufreq: ti-cpufreq: add support for omap34xx and omap36xx
While the OMAP3 family has a USB Host controller, the Torpedo
does not route the host pins off the board rendering it useless.
This patch removes the host references.
Signed-off-by: Adam Ford <aford173@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Instead of using legacy platform data, switch to use device properties.
For clock frequency we are using well established clock-frequency property.
Users, two for now, are also converted here.
Cc: Daniel Mack <daniel@zonque.org>
Cc: Haojian Zhuang <haojian.zhuang@gmail.com>
Cc: Robert Jarzmik <robert.jarzmik@free.fr>
Cc: Russell King <linux@armlinux.org.uk>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
A coccicheck run provided information like the following.
arch/arm/mach-omap2/display.c:268:2-8: ERROR: missing put_device;
call of_find_device_by_node on line 258, but without a corresponding
object release within this function.
Generated by: scripts/coccinelle/free/put_device.cocci
Thus add the missed function call to fix the exception handling for
this function implementation.
Fixes: e0c827aca0730b51f38081aa4e8ecf0912aab55f ("drm/omap: Populate DSS children in omapdss driver")
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Tony Lindgren <tony@atomide.com>
The documentation comments in this file are out of
date with the code, so fix this to avoid the
following warnings:
arch/arm/mach-omap2/omap_device.c:133: warning: Function parameter or member 'pdev' not described in 'omap_device_build_from_dt'
arch/arm/mach-omap2/omap_device.c:133: warning: Excess function parameter 'pdev_name' description in 'omap_device_build_from_dt'
arch/arm/mach-omap2/omap_device.c:133: warning: Excess function parameter 'pdev_id' description in 'omap_device_build_from_dt'
arch/arm/mach-omap2/omap_device.c:133: warning: Excess function parameter 'oh' description in 'omap_device_build_from_dt'
arch/arm/mach-omap2/omap_device.c:133: warning: Excess function parameter 'pdata' description in 'omap_device_build_from_dt'
arch/arm/mach-omap2/omap_device.c:133: warning: Excess function parameter 'pdata_len' description in 'omap_device_build_from_dt'
arch/arm/mach-omap2/omap_device.c:309: warning: Function parameter or member 'pdev' not described in 'omap_device_get_context_loss_count'
arch/arm/mach-omap2/omap_device.c:309: warning: Excess function parameter 'od' description in 'omap_device_get_context_loss_count'
arch/arm/mach-omap2/omap_device.c:335: warning: Function parameter or member 'ohs' not described in 'omap_device_alloc'
arch/arm/mach-omap2/omap_device.c:335: warning: Function parameter or member 'oh_cnt' not described in 'omap_device_alloc'
arch/arm/mach-omap2/omap_device.c:335: warning: Excess function parameter 'oh' description in 'omap_device_alloc'
arch/arm/mach-omap2/omap_device.c:335: warning: Excess function parameter 'pdata' description in 'omap_device_alloc'
arch/arm/mach-omap2/omap_device.c:335: warning: Excess function parameter 'pdata_len' description in 'omap_device_alloc'
arch/arm/mach-omap2/omap_device.c:659: warning: Function parameter or member 'pdev' not described in 'omap_device_register'
arch/arm/mach-omap2/omap_device.c:659: warning: Excess function parameter 'od' description in 'omap_device_register'
arch/arm/mach-omap2/omap_device.c:682: warning: Function parameter or member 'pdev' not described in 'omap_device_enable'
arch/arm/mach-omap2/omap_device.c:682: warning: Excess function parameter 'od' description in 'omap_device_enable'
arch/arm/mach-omap2/omap_device.c:713: warning: Function parameter or member 'pdev' not described in 'omap_device_idle'
arch/arm/mach-omap2/omap_device.c:713: warning: Excess function parameter 'od' description in 'omap_device_idle'
Signed-off-by: Ben Dooks (Codethink) <ben.dooks@codethink.co.uk>
Signed-off-by: Tony Lindgren <tony@atomide.com>
All of arch/arm/mach-omap1/Kconfig is enclosed in a big "if ARCH_OMAP1"
and so every symbol already has a dependency on ARCH_OMAP1 even without
mentioning it in their list of dependencies.
Also dependencies on ARCH_OMAP can be dropped as it is selected by
ARCH_OMAP1.
Signed-off-by: Uwe Kleine-König <uwe@kleine-koenig.org>
Acked-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Various architectures that use asm-generic/io.h still defined their
own default versions of ioremap_nocache, ioremap_wt and ioremap_wc
that point back to plain ioremap directly or indirectly. Remove these
definitions and rely on asm-generic/io.h instead. For this to work
the backup ioremap_* defintions needs to be changed to purely cpp
macros instea of inlines to cover for architectures like openrisc
that only define ioremap after including <asm-generic/io.h>.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Palmer Dabbelt <palmer@dabbelt.com>
For dma-direct we know that the DMA address is an encoding of the
physical address that we can trivially decode. Use that fact to
provide implementations that do not need the arch_dma_coherent_to_pfn
architecture hook. Note that we still can only support mmap of
non-coherent memory only if the architecture provides a way to set an
uncached bit in the page tables. This must be true for architectures
that use the generic remap helpers, but other architectures can also
manually select it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Max Filippov <jcmvbkbc@gmail.com>
The driver should not require a machine specific header. Change
it to pass the GPIO line through a lookup table, and move the
timing generator definitions into the drivers itself.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Robert Jarzmik <robert.jarzmik@free.fr>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
There is a distinct version of the Ux500 U8420 variant
with "sysclk", as can be seen from the vendor code that
didn't make it upstream, this firmware lacks the
ULPPLL (ultra-low power phase locked loop) which in
effect means that the timer clock is instead wired to
the 32768 Hz always-on clock.
This has some repercussions when enabling the timer
clock as the code as it stands will disable the timer
clock on these platforms (lacking the so-called
"doze mode") and obtaining the wrong rate of the timer
clock.
The timer frequency is of course needed very early in
the boot, and as a consequence, we need to shuffle
around the early PRCMU init code: whereas in the past
we did not need to look up the PRCMU firmware version
in the early init, but now we need to know the version
before the core system timers are registered so we
restructure the platform callbacks to the PRCMU so as
not to take any arguments and instead look up the
resources it needs directly from the device tree
when initializing.
As we do not yet support any platforms using this
firmware it is not a regression, but as PostmarketOS
is starting to support products with this firmware we
need to fix this up.
The low rate of 32kHz also makes the MTU timer unsuitable
as delay timer but this needs to be fixed in a separate
patch.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Stephan Gerhold <stephan@gerhold.net>
Acked-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
-----BEGIN PGP SIGNATURE-----
iQFZBAABCABDFiEE7v+35S2Q1vLNA3Lx86Z5yZzRHYEFAl3IKUclHGhlaWtvLnN0
dWVibmVyQHRoZW9icm9tYS1zeXN0ZW1zLmNvbQAKCRDzpnnJnNEdgV9XB/wPEBzJ
JmK/Adlqs+6bMHJ6IJ1OTE5L2kwf6UU3bjo8cayRqSGohSdUiryiAyn27dHDD9lR
3hgu+6b6rZicZOe2iGC1fGd8nz3tz5/vpDdFlzrxYf5iVoosaFetwuFbDZL+xvbp
saLIeeGeyOVAsCkZCfzzosWbfuhXfi80GkgiSSdKc3wvxZjzd2dI6HKn+BtjN/rL
u+8EuNdFHi10dSRMFsPzYC4jXfMk1ni4gQBaslUObWc/LVC4spFPX4dyWEYF+aQM
9JTI7rtAzkIRZVJ4U8hW4WVXrjDmDAvfLiDBfbcI0DRTrWuY5zPz382Ltu7ULRxq
2+5RzEMfCkppsnob
=SOyG
-----END PGP SIGNATURE-----
Merge tag 'v5.5-rockchip-dts32-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/dt
HDMI-audio support for Veyron devices.
* tag 'v5.5-rockchip-dts32-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
ARM: dts: rockchip: Add HDMI audio support to rk3288-veyron-mickey
ARM: dts: rockchip: Add HDMI support to rk3288-veyron-analog-audio
Link: https://lore.kernel.org/r/1926436.N9mSsAMzn9@phil
Signed-off-by: Olof Johansson <olof@lixom.net>
A set of fixes that have trickled in over the last couple of weeks:
- MAINTAINER update for Cavium/Marvell ThunderX2
- stm32 tweaks to pinmux for Joystick/Camera, and RAM allocation for CAN
interfaces
- i.MX fixes for voltage regulator GPIO mappings, fixes voltage scaling
issues
- More i.MX fixes for various issues on i.MX eval boards: interrupt
storm due to u-boot leaving pins in new states, fixing power button
config, a couple of compatible-string corrections.
- Powerdown and Suspend/Resume fixes for Allwinner A83-based tablets
- A few documentation tweaks and a fix of a memory leak in the reset
subsystem
-----BEGIN PGP SIGNATURE-----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=Ei7j
-----END PGP SIGNATURE-----
Merge tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Olof Johansson:
"A set of fixes that have trickled in over the last couple of weeks:
- MAINTAINER update for Cavium/Marvell ThunderX2
- stm32 tweaks to pinmux for Joystick/Camera, and RAM allocation for
CAN interfaces
- i.MX fixes for voltage regulator GPIO mappings, fixes voltage
scaling issues
- More i.MX fixes for various issues on i.MX eval boards: interrupt
storm due to u-boot leaving pins in new states, fixing power button
config, a couple of compatible-string corrections.
- Powerdown and Suspend/Resume fixes for Allwinner A83-based tablets
- A few documentation tweaks and a fix of a memory leak in the reset
subsystem"
* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
MAINTAINERS: update Cavium ThunderX2 maintainers
ARM: dts: stm32: change joystick pinctrl definition on stm32mp157c-ev1
ARM: dts: stm32: remove OV5640 pinctrl definition on stm32mp157c-ev1
ARM: dts: stm32: Fix CAN RAM mapping on stm32mp157c
ARM: dts: stm32: relax qspi pins slew-rate for stm32mp157
arm64: dts: zii-ultra: fix ARM regulator GPIO handle
ARM: sunxi: Fix CPU powerdown on A83T
ARM: dts: sun8i-a83t-tbs-a711: Fix WiFi resume from suspend
arm64: dts: imx8mn: fix compatible string for sdma
arm64: dts: imx8mm: fix compatible string for sdma
reset: fix reset_control_ops kerneldoc comment
ARM: dts: imx6-logicpd: Re-enable SNVS power key
soc: imx: gpc: fix initialiser format
ARM: dts: imx6qdl-sabreauto: Fix storm of accelerometer interrupts
arm64: dts: ls1028a: fix a compatible issue
reset: fix reset_control_get_exclusive kerneldoc comment
reset: fix reset_control_lookup kerneldoc comment
reset: fix of_reset_control_get_count kerneldoc comment
reset: fix of_reset_simple_xlate kerneldoc comment
reset: Fix memory leak in reset_control_array_put()
support poweroff and power-related keys on bpi-r2
Suggested-by: Frank Wunderlich <frank-w@public-files.de>
Signed-off-by: Josef Friedl <josef.friedl@speed.at>
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
- Unselect PIT now that the TCBs can be used at boot time
-----BEGIN PGP SIGNATURE-----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=IDSp
-----END PGP SIGNATURE-----
Merge tag 'at91-5.5-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into arm/defconfig
AT91 defconfig for 5.5
- Unselect PIT now that the TCBs can be used at boot time
* tag 'at91-5.5-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux:
ARM: configs: at91: unselect PIT
Link: https://lore.kernel.org/r/20191107222445.GA202433@piout.net
Signed-off-by: Olof Johansson <olof@lixom.net>
- New Overkiz Kizbox3 board
- Rework of the other Kizbox device trees
- New filters for i2c on sama5d4 and sama5d2
-----BEGIN PGP SIGNATURE-----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=5cCb
-----END PGP SIGNATURE-----
Merge tag 'at91-5.5-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into arm/dt
AT91 DT for 5.5
- New Overkiz Kizbox3 board
- Rework of the other Kizbox device trees
- New filters for i2c on sama5d4 and sama5d2
* tag 'at91-5.5-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux:
ARM: dts: at91: add a dts and dtsi file for kizbox2 based boards
dt-bindings: arm: at91: Document Kizbox2-2 board binding
ARM: dts: at91: sama5d4_xplained: add digital filter for i2c
ARM: dts: at91: sama5d2_xplained: add analog and digital filter for i2c
ARM: dts: at91: add Overkiz KIZBOX3 board
dt-bindings: arm: at91: Document Kizbox3 HS board binding
dt-bindings: Add vendor prefix for Overkiz SAS
ARM: dts: at91: sama5d2: add an rtc label for derived boards
ARM: dts: at91: sama5d27_som1_ek: add mmc capabilities for SDMMC0
Link: https://lore.kernel.org/r/20191108070938.GA215379@piout.net
Signed-off-by: Olof Johansson <olof@lixom.net>
- Lots of work on the AST2600 boards as bringup continues. There's the
eval board, and two IBM boards called Tacoma and Rainier
- A new flash layout for OpenBMC systems with larger flashes
- Better support for the MAC clocking when talking to a NCSI device,
making Linux less reliant on u-boot having done the correct thing
- LED fixes for vesin and fp5280g2
- SGPIO support
- Facebook network BMC cleanup with the common hardware moved to a
shared dtsi
-----BEGIN PGP SIGNATURE-----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=79EI
-----END PGP SIGNATURE-----
Merge tag 'aspeed-5.5-devicetree' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/aspeed into arm/dt
ASPEED device tree updates for 5.5
- Lots of work on the AST2600 boards as bringup continues. There's the
eval board, and two IBM boards called Tacoma and Rainier
- A new flash layout for OpenBMC systems with larger flashes
- Better support for the MAC clocking when talking to a NCSI device,
making Linux less reliant on u-boot having done the correct thing
- LED fixes for vesin and fp5280g2
- SGPIO support
- Facebook network BMC cleanup with the common hardware moved to a
shared dtsi
* tag 'aspeed-5.5-devicetree' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/aspeed: (48 commits)
ARM: dts: aspeed-g6: Add timer description
ARM: dts: aspeed: ast2600evb: Enable i2c buses
ARM: dts: aspeed-g5: Add SGPIO description
ARM: dts: aspeed: yamp: Use common dtsi
ARM: dts: aspeed: minipack: Use common dtsi
ARM: dts: aspeed: cmm: Use common dtsi
ARM: dts: aspeed: Common dtsi for Facebook AST2500 Network BMCs
ARM: dts: aspeed: rainier: gpio-keys for PSU presence
ARM: dts: aspeed: rainier: Fix i2c eeprom size
ARM: dts: tacoma: Hog LPC pinmux
ARM: dts: aspeed: rainier: Enable VUART1
ARM: dts: aspeed: rainier: Add i2c eeproms
ARM: dts: aspeed: tacoma: Use 64MB for firmware memory
ARM: dts: aspeed: tacoma: Add host FSI description
ARM: dts: ast2600evb: Enable UART workaround
ARM: dts: aspeed: tacoma: Add UART1 and workaround
ARM: dts: aspeed-g6: Add remaining UARTs
ARM: dts: aspeed-g6: Fix i2c clock source
ARM: dts: aspeed: Add RCLK to MAC clocks for RMII interfaces
ARM: dts: aspeed: tacoma: Enable FMC and SPI devices
...
Link: https://lore.kernel.org/r/CACPK8Xe8XiJ+oEp3_AXO5Mox-mXWVrOJKQLJMKJxg1WdYCTzMw@mail.gmail.com
Signed-off-by: Olof Johansson <olof@lixom.net>
Just like we do for WFE trapping, it can be useful to turn off
WFI trapping when the physical CPU is not oversubscribed (that
is, the vcpu is the only runnable process on this CPU) *and*
that we're using direct injection of interrupts.
The conditions are reevaluated on each vcpu_load(), ensuring that
we don't switch to this mode on a busy system.
On a GICv4 system, this has the effect of reducing the generation
of doorbell interrupts to zero when the right conditions are
met, which is a huge improvement over the current situation
(where the doorbells are screaming if the CPU ever hits a
blocking WFI).
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Zenghui Yu <yuzenghui@huawei.com>
Reviewed-by: Christoffer Dall <christoffer.dall@arm.com>
Link: https://lore.kernel.org/r/20191107160412.30301-3-maz@kernel.org
The xen_mm_init is not exported or used outside of the file
it is declared in, so make it static. This fixes the following
sparse warning:
arch/arm/xen/mm.c:136:12: warning: symbol 'xen_mm_init' was not declared. Should it be static?
Signed-off-by: Ben Dooks (Codethink) <ben.dooks@codethink.co.uk>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Signed-off-by: Juergen Gross <jgross@suse.com>
Include <xen/xen-ops.h> for xen_{create,destroy}_contigous_region
call declarations. Fixes the following sparse warnings:
arch/arm/xen/mm.c:119:5: warning: symbol 'xen_create_contiguous_region' was not declared. Should it be static?
arch/arm/xen/mm.c:131:6: warning: symbol 'xen_destroy_contiguous_region' was not declared. Should it be static?
Signed-off-by: Ben Dooks (Codethink) <ben.dooks@codethink.co.uk>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Signed-off-by: Juergen Gross <jgross@suse.com>
With the exception of i2c10 and i2c11 which conflict with the pins
for the third and forth MDIO controllers.
i2c0 has an ADT7490 fan controller/thermal monitor device connected. The
devicetree describes an adt74490 on i2c0, however bus that it appears on
depends on jumper settings, so it may not be present on all EVBs. It is
included to assist testing of I2C.
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Signed-off-by: Joel Stanley <joel@jms.id.au>
There are several boards available depending on the PCB
(3 antennas support and several revison). Add a dtsi file to share
common binding between all kizbox2 boards. This patch also add support
for the kizbox2-2 variant.
Signed-off-by: Kévin RAYMOND <k.raymond@overkiz.com>
Signed-off-by: Mickael GARDET <m.gardet@overkiz.com>
Signed-off-by: Kamel Bouhara <kamel.bouhara@bootlin.com>
Link: https://lore.kernel.org/r/20191105212234.22999-2-kamel.bouhara@bootlin.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
* Enable OCMEM support
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=2pjn
-----END PGP SIGNATURE-----
Merge tag 'qcom-defconfig-for-5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/defconfig
Qualcomm ARM Based defconfig Updates for v5.5
* Enable OCMEM support
* tag 'qcom-defconfig-for-5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
ARM: qcom_defconfig: add ocmem support
Link: https://lore.kernel.org/r/1573068840-13098-3-git-send-email-agross@kernel.org
Signed-off-by: Olof Johansson <olof@lixom.net>
- Enable i.MX7ULP watchdog, DA9052 touch and USB configfs support
in imx_v6_v7_defconfig.
- Enable newly added S32V234 SoC and its UART driver support in arm64
defconfig.
- Built i.MX8QXP SCU key driver as module in arm64 defconfig.
- Change AT803X Ethernet PHY driver from module to built-in, so that
we can boot i.MX8MM EVK board with rootfs on NFS.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJdwYuhAAoJEFBXWFqHsHzO+tcH/RmEkt5uueRqM++I56F7Kmc9
80I2pMUbCXln2rjWXEP29OE1h4pKtimfwtEoQvtRX8DOhCFT+CCxsj9JqMZAEnxp
WrCC6GbNAYG+Geje6HAVy7mr2mFD4KXwcc/TLjV2fk3MpuEcsYLuEL/t+wqnKw/W
IabyG0v/CZfp1fkX5FIkpmI770WzOs5kzfIGTnJ9GEJtj/omZYPXK605GSDSWovJ
XX2iI2wFmLy8/KO9enhGQjSzZQyOZce/cyqCG4YGdWSHQzJE9zBP207EHZqEB21b
g+5VzYbM75WmAt0TL+2K3ZzuOKVKZeDpY6KQTz02rTfIRZ4sieY6l9+i/ECtAgY=
=w4CK
-----END PGP SIGNATURE-----
Merge tag 'imx-defconfig-5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/defconfig
i.MX defconfig update for 5.5:
- Enable i.MX7ULP watchdog, DA9052 touch and USB configfs support
in imx_v6_v7_defconfig.
- Enable newly added S32V234 SoC and its UART driver support in arm64
defconfig.
- Built i.MX8QXP SCU key driver as module in arm64 defconfig.
- Change AT803X Ethernet PHY driver from module to built-in, so that
we can boot i.MX8MM EVK board with rootfs on NFS.
* tag 'imx-defconfig-5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
arm64: defconfig: Change CONFIG_AT803X_PHY from m to y
ARM: imx_v6_v7_defconfig: Enable CONFIG_TOUCHSCREEN_DA9052
arm64: defconfig: Enable configs for S32V234
arm64: defconfig: Enable CONFIG_KEYBOARD_IMX_SC_KEY as module
ARM: imx_v6_v7_defconfig: Build USB_CONFIGFS into kernel
ARM: imx_v6_v7_defconfig: Enable CONFIG_IMX7ULP_WDT by default
Link: https://lore.kernel.org/r/20191105150315.15477-7-shawnguo@kernel.org
Signed-off-by: Olof Johansson <olof@lixom.net>
- New board support: Netronix E60K02 and Kobo Clara HD, Kontron N6311
and N6411, OPOS6UL and OPOS6ULDev.
- Correct speed grading fuse settings and add opp-suspend property for
i.MX7D device tree.
- Move usdhc clocks assignment from SoC to board level DTS for imx7ulp,
and use APLL_PFD1 as usdhc's clock source on imx7ulp-evk board.
- Add missing cooling device properties for CPUs for i.MX6/7 SoCs.
- Add sensor GPIO regulator and assign power supplies for magnetometer
for imx6ul-14x14-evk board.
- Replace "simple-bus" with "simple-mfd" for ANATOP device for i.MX6/7
SoCs.
- Fix DTC W=1 warnings by not using simple-audio-card,dai-link on
imx6qdl-gw551x and imx6q-gw54xx board.
- Move to use DRM bindings for the Seiko 43WVF1G panel on imx53-qsb.
- A series from Frieder Schrempf to support more i.MX6UL/ULL-based SoMs
and boards from Kontron Electronics GmbH.
- A few patches from Michal Vokáč to enable more devices support on
imx6dl-yapp4 board.
- A patch series from Philippe Schenker to improve i.MX6/7 Apalis and
Colibri board support.
- A patch series from Sébastien Szymanski to update i.MX6 APF6/APF6Dev
device tree with more devices added and adopting DRM bindings for
display.
- Random improvements, clean-up and device additions on various boards.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJdwW3/AAoJEFBXWFqHsHzOnhcH/jgLxillLz4ie3ijAxWUChRl
mYK4EHitWTCE/GIcvRBFLissSb+m88cTc5GYvnlHRtbGGz7EATNOeC5ifE5O73QA
hT2ce5L4YafC8pzA9eelFxdoimQx5mdiDFWHzLv6yMqgNn1L2vGCDPUJ58HDkV1G
8rGiWWWsFFEwcpmgaojn9bANUfSG667QD1lcbJkboLaaeUP+lI0WfiJ+W5XmQyhe
v8oS8m7oPnOOb77/MdJTYpnxj/3uZqwCPrhur1uiruQVchq5xGCJmYzB5PjkxLZO
Cp5ZdnUjLtRUvhTfRCbN6mYv0nusEpZE9ekZATLj3V8U86E7EKYMQ2gmv7tFhso=
=h8xX
-----END PGP SIGNATURE-----
Merge tag 'imx-dt-5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/dt
i.MX device tree changes for 5.5:
- New board support: Netronix E60K02 and Kobo Clara HD, Kontron N6311
and N6411, OPOS6UL and OPOS6ULDev.
- Correct speed grading fuse settings and add opp-suspend property for
i.MX7D device tree.
- Move usdhc clocks assignment from SoC to board level DTS for imx7ulp,
and use APLL_PFD1 as usdhc's clock source on imx7ulp-evk board.
- Add missing cooling device properties for CPUs for i.MX6/7 SoCs.
- Add sensor GPIO regulator and assign power supplies for magnetometer
for imx6ul-14x14-evk board.
- Replace "simple-bus" with "simple-mfd" for ANATOP device for i.MX6/7
SoCs.
- Fix DTC W=1 warnings by not using simple-audio-card,dai-link on
imx6qdl-gw551x and imx6q-gw54xx board.
- Move to use DRM bindings for the Seiko 43WVF1G panel on imx53-qsb.
- A series from Frieder Schrempf to support more i.MX6UL/ULL-based SoMs
and boards from Kontron Electronics GmbH.
- A few patches from Michal Vokáč to enable more devices support on
imx6dl-yapp4 board.
- A patch series from Philippe Schenker to improve i.MX6/7 Apalis and
Colibri board support.
- A patch series from Sébastien Szymanski to update i.MX6 APF6/APF6Dev
device tree with more devices added and adopting DRM bindings for
display.
- Random improvements, clean-up and device additions on various boards.
* tag 'imx-dt-5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (68 commits)
ARM: dts: imx6ul-kontron-n6x1x-s: Remove an obsolete comment and fix indentation
ARM: dts: imx6ul-kontron-n6x1x-s: Add vbus-supply and overcurrent polarity to usb nodes
ARM: dts: imx6ul-kontron-n6x1x: Add 'chosen' node with 'stdout-path'
ARM: dts: Add support for two more Kontron evalkit boards 'N6311 S' and 'N6411 S'
ARM: dts: imx6ul-kontron-n6310-s: Move common nodes to a separate file
ARM: dts: imx6ul-kontron-n6310-s: Disable the snvs-poweroff driver
ARM: dts: Add support for two more Kontron SoMs N6311 and N6411
ARM: dts: imx6ul-kontron-n6310: Move common SoM nodes to a separate file
ARM: dts: imx7ulp-evk: Use APLL_PFD1 as usdhc's clock source
ARM: dts: imx: add devicetree for Kobo Clara HD
ARM: dts: add Netronix E60K02 board common file
ARM: dts: vf-colibri: fix typo in top-level module compatible
ARM: dts: imx53-qsb: Use DRM bindings for the Seiko 43WVF1G panel
ARM: dts: imx53: Spelling s/configration/configuration/
ARM: dts: imx6ul-14x14-evk: Assign power supplies for magnetometer
ARM: dts: imx6ul-14x14-evk: Fix the magnetometer node name
ARM: dts: imx6ul-14x14-evk: Add sensors' GPIO regulator
ARM: dts: imx6ul: Disable gpt2 by default
ARM: dts: imx7d: Add missing cooling device properties for CPUs
ARM: dts: imx6dl: Add missing cooling device properties for CPUs
...
Link: https://lore.kernel.org/r/20191105150315.15477-4-shawnguo@kernel.org
Signed-off-by: Olof Johansson <olof@lixom.net>
- Add arm64 Kconfig option for the NXP S32 platform.
- Drop imx_anatop_usb_chrg_detect_disable() function which becomes
unneeded, since all the necessary charger setup is done by the USB
PHY driver now.
- Add serial number support for i.MX6/7 SoCs by reading 64-bit SoC
unique ID from OCOTP block.
- Replace i.MX machine specific coherency exit implementation using
the generic v7_exit_coherency_flush() function.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJdwV03AAoJEFBXWFqHsHzOZuwH/Rsls0F80Iowk9382TJqQEWN
cwuZpaPmYyxClUGI16QCWIeL2w0AMh0ni+iamneabADH0rLUvhu753mtSnODZFxE
YQJMJ6Gv5rTW87A3zwWDoGulJ4YGr2HpoNHyY0Re7KQ5lFEZOKafIThbkDkERaum
CqQj5uy39p7DRs+g2jtP8ePTQVH1fU0GfXkNIfI7izYftvM3cpSjwWoTrCV5NE2I
SDanlra5f2UeJ6uUBzpzUrzbNQSMHr87PCfaFwpNdvcCSP2eYrY2NHf6Swi81Q+7
SNLO+5iE9UHWiojWD0vdataioKxOEeSQF8KavVp6Ou6ue/u31TCiCi6ki6sAEB4=
=Mo5t
-----END PGP SIGNATURE-----
Merge tag 'imx-soc-5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/soc
i.MX SoC update for 5.5:
- Add arm64 Kconfig option for the NXP S32 platform.
- Drop imx_anatop_usb_chrg_detect_disable() function which becomes
unneeded, since all the necessary charger setup is done by the USB
PHY driver now.
- Add serial number support for i.MX6/7 SoCs by reading 64-bit SoC
unique ID from OCOTP block.
- Replace i.MX machine specific coherency exit implementation using
the generic v7_exit_coherency_flush() function.
* tag 'imx-soc-5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
ARM: imx: use generic function to exit coherency
ARM: imx: Add serial number support for i.MX6/7 SoCs
ARM: imx: Drop imx_anatop_usb_chrg_detect_disable()
arm64: Introduce config for S32
Link: https://lore.kernel.org/r/20191105150315.15477-2-shawnguo@kernel.org
Signed-off-by: Olof Johansson <olof@lixom.net>
- USB3 support for the H6
- Deinterlacer support for the H3
- eDP Bridge support on the Teres-I
- More DT cleanups thanks to the validation
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRcEzekXsqa64kGDp7j7w1vZxhRxQUCXcK5xwAKCRDj7w1vZxhR
xZagAP9dDphr5+3Ah5E01ANIbI3xiEITkMm55DjahFUtcoygogEA82VvUmCNMzRx
UVt2+k/eLB12V0RPsCCeCKXGCt34OgI=
=arSK
-----END PGP SIGNATURE-----
Merge tag 'sunxi-dt-for-5.5-2' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/dt
A few more DT patches for 5.5, mostly:
- USB3 support for the H6
- Deinterlacer support for the H3
- eDP Bridge support on the Teres-I
- More DT cleanups thanks to the validation
* tag 'sunxi-dt-for-5.5-2' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
arm64: dts: allwinner: h6: Remove useless reset name
ARM: dts: sun6i: Remove useless reset-names
arm64: dts: allwinner: orange-pi-3: Enable USB 3.0 host support
arm64: dts: allwinner: h6: add USB3 device nodes
dt-bindings: Add ANX6345 DP/eDP transmitter binding
arm64: dts: allwinner: a64: enable ANX6345 bridge on Teres-I
dts: arm: sun8i: h3: Enable deinterlace unit
ARM: dts: sunxi: h3/h5: Add MBUS controller node
dt-bindings: bus: sunxi: Add H3 MBUS compatible
Link: https://lore.kernel.org/r/58ad00a8-9579-4811-969a-a74e331ee9a2.lettre@localhost
Signed-off-by: Olof Johansson <olof@lixom.net>
interrupts were improper in a previous fixes PR.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRcEzekXsqa64kGDp7j7w1vZxhRxQUCXcK4vQAKCRDj7w1vZxhR
xYicAP47+z/2soJsnUf1jahKsVFqYoxKa+Z+qYg/f/hdphEvCwD+JqY46XbjbaL7
hzHqYYQvJ1OAO/Mks3ms01/0ZnhbKww=
=9zaU
-----END PGP SIGNATURE-----
Merge tag 'sunxi-fixes-for-5.4-3' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/dt
One patch to add back the PMU node that was removed because the
interrupts were improper in a previous fixes PR.
* tag 'sunxi-fixes-for-5.4-3' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
arm64: dts: allwinner: a64: Re-add PMU node
ARM: sunxi: Fix CPU powerdown on A83T
ARM: dts: sun8i-a83t-tbs-a711: Fix WiFi resume from suspend
ARM: dts: sun7i: Drop the module clock from the device tree
dt-bindings: media: sun4i-csi: Drop the module clock
media: dt-bindings: Fix building error for dt_binding_check
arm64: dts: allwinner: a64: sopine-baseboard: Add PHY regulator delay
arm64: dts: allwinner: a64: Drop PMU node
arm64: dts: allwinner: a64: pine64-plus: Add PHY regulator delay
Link: https://lore.kernel.org/r/45023fa6-b2bc-4934-b85c-3e7841dde0b1.lettre@localhost
Signed-off-by: Olof Johansson <olof@lixom.net>
Highlights:
-----------
Fixes for STM32MP157:
-Fix CAN RAM mapping
-Change stmfx pinctrl definition for joystick and camera. Due to
stmfx pinctrl fix done in v5.4-rc cycle, camera and joystick were no
longer functional.
-----BEGIN PGP SIGNATURE-----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=Fv0m
-----END PGP SIGNATURE-----
Merge tag 'stm32-dt-for-v5.4-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32 into arm/fixes
STM32 DT fixes for v5.4, round 2
Highlights:
-----------
Fixes for STM32MP157:
-Fix CAN RAM mapping
-Change stmfx pinctrl definition for joystick and camera. Due to
stmfx pinctrl fix done in v5.4-rc cycle, camera and joystick were no
longer functional.
* tag 'stm32-dt-for-v5.4-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32:
ARM: dts: stm32: change joystick pinctrl definition on stm32mp157c-ev1
ARM: dts: stm32: remove OV5640 pinctrl definition on stm32mp157c-ev1
ARM: dts: stm32: Fix CAN RAM mapping on stm32mp157c
ARM: dts: stm32: relax qspi pins slew-rate for stm32mp157
Link: https://lore.kernel.org/r/d316b81f-a8d7-e9be-fe3c-73a242e7d941@st.com
Signed-off-by: Olof Johansson <olof@lixom.net>
Pins used for joystick are all configured as input. "push-pull" is not a
valid setting for an input pin.
Fixes: a502b343ebd0 ("pinctrl: stmfx: update pinconf settings")
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
"push-pull" configuration is now fully handled by the gpiolib and the
STMFX pinctrl driver. There is no longer need to declare a pinctrl group
to only configure "push-pull" setting for the line. It is done directly by
the gpiolib.
Fixes: a502b343ebd0 ("pinctrl: stmfx: update pinconf settings")
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
Split the 10Kbytes CAN message RAM to be able to use simultaneously
FDCAN1 and FDCAN2 instances.
First 5Kbytes are allocated to FDCAN1 and last 5Kbytes are used for
FDCAN2. To do so, set the offset to 0x1400 in mram-cfg for FDCAN2.
Fixes: d44d6e021301 ("ARM: dts: stm32: change CAN RAM mapping on stm32mp157c")
Signed-off-by: Christophe Roullier <christophe.roullier@st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
The HDMI controller definition in the A31 DTSI has a reset-names property,
yet the binding for that controller doesn't declare it.
Remove it.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Acked-by: Chen-Yu Tsai <wens@csie.org>
Allwinner H3 SoC contains deinterlace unit, which can be used in
combination with VPU unit to decode and process interlaced videos.
Add a node for it.
Acked-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Both, H3 and H5, contain MBUS, which is the bus used by DMA devices to
access system memory.
MBUS controller is responsible for arbitration between channels based
on set priority and can do some other things as well, like report
bandwidth used. It also maps RAM region to different address than CPU.
Acked-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
The ECSPI1 is not used for a FRAM chip, so remove the comment.
While at it, also change some whitespaces to tabs to comply with the
indentation style of the rest of the file.
Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
To silence the warnings shown by the driver at boot time, we add a
fixed regulator for the 5V supply of usbotg2 and specify the polarity
of the overcurrent signal for usbotg1.
Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
