IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Replace eight spaces with Tab.
Signed-off-by: Rong Tao <rtoax@foxmail.com>
Message-Id: <tencent_89579C514BC4020324A1A4ACA44B5B95BB07@qq.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The MAC Merge layer (IEEE 802.3-2018 clause 99) does all the heavy
lifting for Frame Preemption (IEEE 802.1Q-2018 clause 6.7.2), a TSN
feature for minimizing latency.
Preemptible traffic is different on the wire from normal traffic in
incompatible ways. If we send a preemptible packet and the link partner
doesn't support preemption, it will drop it as an error frame and we
will never know. The MAC Merge layer has a control plane of its own,
which can be manipulated (using ethtool) in order to negotiate this
capability with the link partner (through LLDP).
Actually the TLV format for LLDP solves this problem only partly,
because both partners only advertise:
- if they support preemption (RX and TX)
- if they have enabled preemption (TX)
so we cannot tell the link partner what to do - we cannot force it to
enable reception of our preemptible packets.
That is fully solved by the verification feature, where the local device
generates some small probe frames which look like preemptible frames
with no useful content, and the link partner is obliged to respond to
them if it supports the standard. If the verification times out, we know
that preemption isn't active in our TX direction on the link.
Having clarified the definition, this selftest exercises the manual
(ethtool) configuration path of 2 link partners (with and without
verification), and the LLDP code path, using the openlldp project.
The test also verifies the TX activity of the MAC Merge layer by
sending traffic through a traffic class configured as preemptible
(using mqprio). There isn't a good way to make this really portable
(user space cannot find out how many traffic classes there are for
a device), but I chose num_tc 4 here, that should work reasonably well.
I also know that some devices (stmmac) only permit TXQ0 to be
preemptible, so this is why PREEMPTIBLE_PRIO was strategically chosen
as 0. Even if other hardware is more configurable, this test should
cover the baseline.
This is not really a "forwarding" selftest, but I put it near the other
"ethtool" selftests.
$ ./ethtool_mm.sh eno0 swp0
TEST: Manual configuration with verification: eno0 to swp0 [ OK ]
TEST: Manual configuration with verification: swp0 to eno0 [ OK ]
TEST: Manual configuration without verification: eno0 to swp0 [ OK ]
TEST: Manual configuration without verification: swp0 to eno0 [ OK ]
TEST: Manual configuration with failed verification: eno0 to swp0 [ OK ]
TEST: Manual configuration with failed verification: swp0 to eno0 [ OK ]
TEST: LLDP [ OK ]
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Counters for the MAC Merge layer and preemptible MAC have standardized
so far on using structured ethtool stats as opposed to the driver
specific names and meanings.
Benefit from that rare opportunity and introduce a helper to lib.sh for
querying standardized counters, in the hope that these will take off for
other uses as well.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
mlxsw selftests often invoke a bail_on_lldpad() helper to make sure LLDPAD
is not running, to prevent conflicts between the QoS configuration applied
through TC or DCB command line tool, and the DCB configuration that LLDPAD
might apply. This helper might be useful to others. Move the function to
lib.sh, and parameterize to make reusable in other contexts.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Danielle Ratson <danieller@nvidia.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The driver-specific wrappers of these selftests invoke bail_on_lldpad to
make sure that LLDPAD doesn't trample the configuration. The function
bail_on_lldpad is going to move to lib.sh in the next patch. With that, it
won't be visible for the wrappers before sourcing the framework script. And
after sourcing it, it is too late: the selftest will have run by then.
One option might be to source NUM_NETIFS=0 lib.sh from the wrapper, but
even if that worked (it might, it might not), that seems cumbersome. lib.sh
is doing fair amount of stuff, and even if it works today, it does not look
particularly solid as a solution.
Instead, introduce a hook, sch_tbf_pre_hook(), that when available, gets
invoked. Move the bail to the hook.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Danielle Ratson <danieller@nvidia.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Two test cases:
- "valid read map access into a read-only array 1" and
- "valid read map access into a read-only array 2"
Expect that map_array_ro map is filled with mock data. This logic was
not taken into acount during initial test conversion.
This commit modifies prog_tests/verifier.c entry point for this test
to fill the map.
Fixes: a3c830ae0209 ("selftests/bpf: verifier/array_access.c converted to inline assembly")
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20230420232317.2181776-5-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
When a test case is annotated with __retval tag the test_loader engine
would use libbpf's bpf_prog_test_run_opts() to do a test run of the
program and compare retvals.
This commit allows to perform arbitrary actions on bpf object right
before test loader invokes bpf_prog_test_run_opts(). This could be
used to setup some state for program execution, e.g. fill some maps.
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20230420232317.2181776-4-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Florian Westphal found a bug in and suggested a fix for test_loader.c
processing of __retval tag. Because of this bug the function
test_loader.c:do_prog_test_run() never executed and all __retval test
tags were ignored.
If this bug is fixed a number of test cases from
progs/verifier_array_access.c fail with retval not matching the
expected value. This test was recently converted to use test_loader.c
and inline assembly in [1]. When doing the conversion I missed the
important detail of test_verifier.c operation: when it creates
fixup_map_array_ro, fixup_map_array_wo and fixup_map_array_small it
populates these maps with a dummy record.
Disabling the __retval checks for the affected verifier_array_access
in this commit to avoid false-postivies in any potential bisects.
The issue is addressed in the next patch.
I verified that the __retval tags are now respected by changing
expected return values for all tests annotated with __retval, and
checking that these tests started to fail.
[1] https://lore.kernel.org/bpf/20230325025524.144043-1-eddyz87@gmail.com/
Fixes: 19a8e06f5f91 ("selftests/bpf: Tests execution support for test_loader.c")
Reported-by: Florian Westphal <fw@strlen.de>
Link: https://lore.kernel.org/bpf/f4c4aee644425842ee6aa8edf1da68f0a8260e7c.camel@gmail.com/T/
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20230420232317.2181776-3-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Florian Westphal found a bug in test_loader.c processing of __retval
tag. Because of this bug the function test_loader.c:do_prog_test_run()
never executed and all __retval test tags were ignored. This hid an
issue with progs/refcounted_kptr.c tests.
When __retval tag bug is fixed and refcounted_kptr.c tests are run
kernel reports various issues and eventually hangs. Shortest reproducer
is the following command run a few times:
$ for i in $(seq 1 4); do (./test_progs --allow=refcounted_kptr &); done
Commenting out __retval tags for these tests until this issue is resolved.
Reported-by: Florian Westphal <fw@strlen.de>
Link: https://lore.kernel.org/bpf/f4c4aee644425842ee6aa8edf1da68f0a8260e7c.camel@gmail.com/T/
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20230420232317.2181776-2-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The recent support for inline annotations in control flow graphs
generated by bpftool introduced the usage of the "__fallthrough" macro
in a switch/case block in btf_dumper.c. This change went through the
bpf-next tree, but resulted in a merge conflict in linux-next, because
this macro has been renamed "fallthrough" (no underscores) in the
meantime.
To address the conflict, we temporarily switch to a simple comment
instead of a macro.
Related: commit f7a858bffcdd ("tools: Rename __fallthrough to fallthrough")
Fixes: 9fd496848b1c ("bpftool: Support inline annotations when dumping the CFG of a program")
Reported-by: Sven Schnelle <svens@linux.ibm.com>
Reported-by: Thomas Richter <tmricht@linux.ibm.com>
Suggested-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Quentin Monnet <quentin@isovalent.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/all/yt9dttxlwal7.fsf@linux.ibm.com/
Link: https://lore.kernel.org/bpf/20230412123636.2358949-1-tmricht@linux.ibm.com/
Link: https://lore.kernel.org/bpf/20230420003333.90901-1-quentin@isovalent.com
If using leak sanitizer then implicitly enable reference count checking.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20230420171812.561603-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Fix a use after put reference count issue. maps is copied from leader,
but the leader is put on line 79 and then maps is used to read the
reference count below - so a use after put, with the put of maps
happening within thread__put. Fix by reversing the order of puts so
that the leader is put last.
To explain the reference count checker, I wrote this up as a little
example here:
https://perf.wiki.kernel.org/index.php/Reference_Count_Checking
Note, the bug was introduced by the committer and wasn't present in
the original reference count patch set.
Committer notes:
Yes, the bug predated your patch and is detected by the reference count
checking you contributed.
This was just part of splitting up your series into smaller chunks, in
this case either we fix the problem detected while developing this
reference counting infrastructure before the patch introducing REFCNT_CHECKING
or fix it later after the merged infrastructure, when built with
EXTRA_CFLAGS="-DREFCNT_CHECKING=1" detects it when running 'perf test', which
is what this patch does.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20230420030430.489243-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add prog test for accessing integer type of variable array in tracing
program.
In addition, hook load_balance function to access sd->span[0], only
to confirm whether the load is successful. Because there is no direct
way to trigger load_balance call.
Co-developed-by: Chengming Zhou <zhouchengming@bytedance.com>
Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com>
Signed-off-by: Feng Zhou <zhoufeng.zf@bytedance.com>
Link: https://lore.kernel.org/r/20230420032735.27760-3-zhoufeng.zf@bytedance.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Reducing the time taken by dscr_sysfs_test.c allows restoring the
default timeout, which was removed in
commit 850507f30c38 ("selftests/powerpc: Turn off timeout setting for
benchmarks, dscr, signal, tm") because that test took too long.
Signed-off-by: Benjamin Gray <bgray@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230406043320.125138-8-bgray@linux.ibm.com
This test case is extremely slow, taking around a minute compared to
most of the other DSCR tests taking a second at most. Perf shows most
time is spent by the kernel switching to each CPU it reads in
/sys/devices/system/cpu. This switching is an unavoidable consequnce
of reading all the .../cpuN/dscr values.
Remove the outer iteration loop from this test case, reducing the reads
from 1600 to 16. This still updates the DSCR 16 times and verifies on
every CPU each time, so I do not expect the lower coverage to be
meaningful. The speedup is significant: back down to ~1 second like the
other tests.
Signed-off-by: Benjamin Gray <bgray@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230406043320.125138-7-bgray@linux.ibm.com
The tests currently have a single writer thread updating the system
DSCR with a 1/1000 chance looped only 100 times. So only around one in
10 runs actually do anything.
* Add multiple threads to the dscr_explicit_random_test case.
* Use a barrier to make all the threads start work as simultaneously as
possible.
* Use a rwlock and make all threads have a reasonable chance to write to
the DSCR on each iteration.
PTHREAD_RWLOCK_PREFER_WRITER_NONRECURSIVE_NP is used to prevent
writers from starving while all the other threads keep reading.
Logging the reads/writes shows a decent mix across the whole test.
* Allow all threads a chance to write.
* Make the chance of writing more likely.
Signed-off-by: Benjamin Gray <bgray@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230406043320.125138-6-bgray@linux.ibm.com
Add new cases to the relevant tests that use explicitly synchronized
threads to test the behaviour across context switches with less
randomness. By locking the participants to the same CPU we guarantee a
context switch occurs each time they make progress, which is a likely
failure point if the kernel is not tracking the thread local DSCR
correctly.
The random case is left in to keep exercising potential edge cases.
Signed-off-by: Benjamin Gray <bgray@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230406043320.125138-5-bgray@linux.ibm.com
All current users of bind_to_cpu() don't care _which_ CPU they get, just
that they are bound to a single free one. So alter the interface to
1. Accept a BIND_CPU_ANY value that tells it to automatically
pick a CPU
2. Return the picked CPU
And convert all these users to bind_to_cpu(BIND_CPU_ANY).
Signed-off-by: Benjamin Gray <bgray@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230406043320.125138-4-bgray@linux.ibm.com
This function will be useful in the DSCR test patches later in this
series, so promote it to be shared by all powerpc selftests.
Signed-off-by: Benjamin Gray <bgray@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230406043320.125138-3-bgray@linux.ibm.com
Correct a couple of typos while working on other improvements to the
DSCR tests.
Signed-off-by: Benjamin Gray <bgray@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230406043320.125138-2-bgray@linux.ibm.com
This macro is to be used in assembly where C functions are called.
pcrel addressing mode requires branches to functions with a
localentry value of 1 to have either a trailing nop or @notoc.
This macro permits the latter without changing callers.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
[mpe: Add dummy definitions to fix selftests build]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230408021752.862660-5-npiggin@gmail.com
19 are cc:stable and the remainder address issues which were introduced
during this merge cycle, or aren't considered suitable for -stable
backporting.
19 are for MM and the remainder are for other subsystems.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZEB7GgAKCRDdBJ7gKXxA
jl4zAP9LxKisY8L29qrZG/SKoYbMMSM33ASOGZJRAuRRaOYL6QEAvS14pg/c22rL
4GCZbzvENY4xPRbz/6kc/s2Jnuww4wA=
=Kh/V
-----END PGP SIGNATURE-----
Merge tag 'mm-hotfixes-stable-2023-04-19-16-36' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"22 hotfixes.
19 are cc:stable and the remainder address issues which were
introduced during this merge cycle, or aren't considered suitable for
-stable backporting.
19 are for MM and the remainder are for other subsystems"
* tag 'mm-hotfixes-stable-2023-04-19-16-36' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (22 commits)
nilfs2: initialize unused bytes in segment summary blocks
mm: page_alloc: skip regions with hugetlbfs pages when allocating 1G pages
mm/mmap: regression fix for unmapped_area{_topdown}
maple_tree: fix mas_empty_area() search
maple_tree: make maple state reusable after mas_empty_area_rev()
mm: kmsan: handle alloc failures in kmsan_ioremap_page_range()
mm: kmsan: handle alloc failures in kmsan_vmap_pages_range_noflush()
tools/Makefile: do missed s/vm/mm/
mm: fix memory leak on mm_init error handling
mm/page_alloc: fix potential deadlock on zonelist_update_seq seqlock
kernel/sys.c: fix and improve control flow in __sys_setres[ug]id()
Revert "userfaultfd: don't fail on unrecognized features"
writeback, cgroup: fix null-ptr-deref write in bdi_split_work_to_wbs
maple_tree: fix a potential memory leak, OOB access, or other unpredictable bug
tools/mm/page_owner_sort.c: fix TGID output when cull=tg is used
mailmap: update jtoppins' entry to reference correct email
mm/mempolicy: fix use-after-free of VMA iterator
mm/huge_memory.c: warn with pr_warn_ratelimited instead of VM_WARN_ON_ONCE_FOLIO
mm/mprotect: fix do_mprotect_pkey() return on error
mm/khugepaged: check again on anon uffd-wp during isolation
...
To fix this confusing warning:
# perf probe -l
Failed to find debug information for address 798240
probe_main:prometheus_new_counter__return (on github.com/prometheus/client_golang/prometheus.NewCounter%return in /home/acme/git/prometheus-uprobes/main with counter)
#
As that 798240 is printed with PRIx64 but has no letters, better print
the 0x prefix to disambiguate.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/lkml/ZEBCyFu2GjTw6qOi@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
There's no strict get/put policy with map that leads to leaks or use
after free. Reference count checking identifies correct pairing of gets
and puts.
Committer notes:
Extracted from a larger patch removing bits that were covered by the use
of pre-existing map__ accessors (e.g. maps__nr_maps()) and new ones
added (map__refcnt() and the maps__set_ ones) to reduce
RC_CHK_ACCESS(maps)-> source code pollution.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexey Bayduraev <alexey.v.bayduraev@linux.intel.com>
Cc: Dmitriy Vyukov <dvyukov@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Riccardo Mancini <rickyman7@gmail.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Stephen Brennan <stephen.s.brennan@oracle.com>
Link: https://lore.kernel.org/lkml/20230407230405.2931830-6-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Some conversions weren't performed in 4e8db2d7520f780f ("perf map: Add
map__refcnt() accessor to use in the maps test"), fix it.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Fix the unmapping of hugepage allocated umems so that they are
properly unmapped. The new test referred to in the fixes label,
introduced a test that allocated a umem that is not a multiple of a 2M
hugepage size. This is fine for mmap() that rounds the size up the
nearest multiple of 2M. But munmap() requires the size to be a
multiple of the hugepage size in order for it to unmap the region. The
current behaviour of not properly unmapping the umem, was discovered
when further additions of tests that require hugepages (unaligned mode
tests only) started failing as the system was running out of
hugepages.
Fixes: c0801598e543 ("selftests: xsk: Add test UNALIGNED_INV_DESC_4K1_FRAME_SIZE")
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20230418143617.27762-1-magnus.karlsson@gmail.com
Add reference count checking to make sure of good use of get and put.
Add and use accessors to reduce RC_CHK clutter.
The only significant issue was in tests/thread-maps-share.c where
reference counts were released in the reverse order to acquisition,
leading to a use after put. This was fixed by reversing the put order.
Committer notes:
Extracted from a larger patch removing bits that were covered by the use
of pre-existing maps__ accessors (e.g. maps__nr_maps()) and new ones
added (maps__refcnt()) to reduce RC_CHK_ACCESS(maps)-> source code
pollution.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexey Bayduraev <alexey.v.bayduraev@linux.intel.com>
Cc: Dmitriy Vyukov <dvyukov@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Riccardo Mancini <rickyman7@gmail.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Stephen Brennan <stephen.s.brennan@oracle.com>
Link: https://lore.kernel.org/lkml/20230407230405.2931830-5-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To remove one more direct access to 'struct maps' so that we can
intercept accesses to its instantiations and refcount check it to catch
use after free, etc.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
James Clark noticed that the recent 63df0e4bc368adbd ("perf map: Add
accessor for dso") patch accessed map->dso before the 'map' variable was
NULL checked, which is a change in logic that leads to segmentation
faults, so comb thru that patch to fix similar cases.
Fixes: 63df0e4bc368adbd ("perf map: Add accessor for dso")
Acked-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/lkml/ZD68RYCVT8hqPuxr@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Although __SIZEOF_POINTER__ is equal to _SIZEOF_LONG__ on LoongArch,
it is better to use __SIZEOF_LONG__ to define __BITS_PER_LONG to keep
consistent between arch/loongarch/include/uapi/asm/bitsperlong.h and
tools/arch/loongarch/include/uapi/asm/bitsperlong.h.
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
The old 'copy_user_generic_unrolled' function was oddly implemented for
largely historical reasons: it had been largely based on the uncached
copy case, which has some other concerns.
For example, the __copy_user_nocache() function uses 'movnti' for the
destination stores, and those want the destination to be aligned. In
contrast, the regular copy function doesn't really care, and trying to
align things only complicates matters.
Also, like the clear_user function, the copy function had some odd
handling of the repeat counts, complicating the exception handling for
no really good reason. So as with clear_user, just write it to keep all
the byte counts in the %rcx register, exactly like the 'rep movs'
functionality that this replaces.
Unlike a real 'rep movs', we do allow for this to trash a few temporary
registers to not have to unnecessarily save/restore registers on the
stack.
And like the clearing case, rename this to what it now clearly is:
'rep_movs_alternative', and make it one coherent function, so that it
shows up as such in profiles (instead of the odd split between
"copy_user_generic_unrolled" and "copy_user_short_string", the latter of
which was not about strings at all, and which was shared with the
uncached case).
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The old version was oddly written to have the repeat count in multiple
registers. So instead of taking advantage of %rax being zero, it had
some sub-counts in it. All just for a "single word clearing" loop,
which isn't even efficient to begin with.
So get rid of those games, and just keep all the state in the same
registers we got it in (and that we should return things in). That not
only makes this act much more like 'rep stos' (which this function is
replacing), but makes it much easier to actually do the obvious loop
unrolling.
Also rename the function from the now nonsensical 'clear_user_original'
to what it now clearly is: 'rep_stos_alternative'.
End result: if we don't have a fast 'rep stosb', at least we can have a
fast fallback for it.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This does the same thing for the user copies as commit 0db7058e8e23
("x86/clear_user: Make it faster") did for clear_user(). In other
words, it inlines the "rep movs" case when X86_FEATURE_FSRM is set,
avoiding the function call entirely.
In order to do that, it makes the calling convention for the out-of-line
case ("copy_user_generic_unrolled") match the 'rep movs' calling
convention, although it does also end up clobbering a number of
additional registers.
Also, to simplify code sharing in the low-level assembly with the
__copy_user_nocache() function (that uses the normal C calling
convention), we end up with a kind of mixed return value for the
low-level asm code: it will return the result in both %rcx (to work as
an alternative for the 'rep movs' case), _and_ in %rax (for the nocache
case).
We could avoid this by wrapping __copy_user_nocache() callers in an
inline asm, but since the cost is just an extra register copy, it's
probably not worth it.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This is preparatory work for inlining the 'rep movs' case, but also a
cleanup. The __copy_user_nocache() function was mis-used by the rdma
code to do uncached kernel copies that don't actually want user copies
at all, and as a result doesn't want the stac/clac either.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The modern target to use is FSRS (Fast Short REP STOS), and the other
cases should only be used for bigger areas (ie mainly things like page
clearing).
Note! This changes the conditional for the inlining from FSRM ("fast
short rep movs") to FSRS ("fast short rep stos").
We'll have a separate fixup for AMD microarchitectures that have a good
'rep stosb' yet do not set the new Intel-specific FSRS bit (because FSRM
was there first).
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
sysctl memfd_noexec is pid-namespaced, non-reservable, and inherent to the
child process.
Move the inherence test from init ns to child ns, so init ns can keep the
default value.
Link: https://lkml.kernel.org/r/20230414022801.2545257-1-jeffxu@google.com
Signed-off-by: Jeff Xu <jeffxu@google.com>
Reported-by: kernel test robot <yujie.liu@intel.com>
Link: https://lore.kernel.org/oe-lkp/202303312259.441e35db-yujie.liu@intel.com
Tested-by: Yujie Liu <yujie.liu@intel.com>
Cc: Daniel Verkamp <dverkamp@chromium.org>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jann Horn <jannh@google.com>
Cc: Jorge Lucangeli Obes <jorgelo@chromium.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The va_high_addr_switch selftest is used to test mmap across 128TB
boundary. It divides the selftest cases into two main categories on the
basis of size. One set is used to create mappings that are multiples of
PAGE_SIZE while the other creates mappings that are multiples of
HUGETLB_SIZE.
In order to run the hugetlb testcases the binary must be appended with
"--run-hugetlb" but the file that used to run the test only invokes the
binary, thereby completely skipping the hugetlb testcases. Hence, the
required statement has been added.
Link: https://lkml.kernel.org/r/20230323105243.2807166-6-chaitanyas.prakash@arm.com
Signed-off-by: Chaitanya S Prakash <chaitanyas.prakash@arm.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Arm64 has a default hugepage size of 512MB when CONFIG_ARM64_64K_PAGES=y
is enabled. While testing on arm64 platforms having up to 4PB of virtual
address space, a minimum of 6 hugepages were required for all test cases
to pass. Support for this requirement has been added.
Link: https://lkml.kernel.org/r/20230323105243.2807166-5-chaitanyas.prakash@arm.com
Signed-off-by: Chaitanya S Prakash <chaitanyas.prakash@arm.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The in code comments for the selftest were made on the basis of 128TB
switch, an architecture feature specific to PowerPc and x86 platforms.
Keeping in mind the support added for arm64 platforms which implements a
256TB switch, a more generic explanation has been provided.
Link: https://lkml.kernel.org/r/20230323105243.2807166-4-chaitanyas.prakash@arm.com
Signed-off-by: Chaitanya S Prakash <chaitanyas.prakash@arm.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
As the initial selftest only took into consideration PowperPC and x86
architectures, on adding support for arm64, a platform independent naming
convention is chosen.
Link: https://lkml.kernel.org/r/20230323105243.2807166-3-chaitanyas.prakash@arm.com
Signed-off-by: Chaitanya S Prakash <chaitanyas.prakash@arm.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "selftests/mm: Implement support for arm64 on va".
The va_128TBswitch selftest is designed and implemented for PowerPC and
x86 architectures which support a 128TB switch, up to 256TB of virtual
address space and hugepage sizes of 16MB and 2MB respectively. Arm64
platforms on the other hand support a 256Tb switch, up to 4PB of virtual
address space and a default hugepage size of 512MB when 64k pagesize is
enabled.
These architectural differences require introducing support for arm64
platforms, after which a more generic naming convention is suggested. The
in code comments are amended to provide a more platform independent
explanation of the working of the code and nr_hugepages are configured as
required. Finally, the file running the testcase is modified in order to
prevent skipping of hugetlb testcases of va_high_addr_switch.
This patch (of 5):
Arm64 platforms have the ability to support 64kb pagesize, 512MB default
hugepage size and up to 4PB of virtual address space. The address switch
occurs at 256TB as opposed to 128TB. Hence, the necessary support has
been added.
Link: https://lkml.kernel.org/r/20230323105243.2807166-1-chaitanyas.prakash@arm.com
Link: https://lkml.kernel.org/r/20230323105243.2807166-2-chaitanyas.prakash@arm.com
Signed-off-by: Chaitanya S Prakash <chaitanyas.prakash@arm.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Delay accounting does not track the delay of IRQ/SOFTIRQ. While
IRQ/SOFTIRQ could have obvious impact on some workloads productivity, such
as when workloads are running on system which is busy handling network
IRQ/SOFTIRQ.
Get the delay of IRQ/SOFTIRQ could help users to reduce such delay. Such
as setting interrupt affinity or task affinity, using kernel thread for
NAPI etc. This is inspired by "sched/psi: Add PSI_IRQ to track
IRQ/SOFTIRQ pressure"[1]. Also fix some code indent problems of older
code.
And update tools/accounting/getdelays.c:
/ # ./getdelays -p 156 -di
print delayacct stats ON
printing IO accounting
PID 156
CPU count real total virtual total delay total delay average
15 15836008 16218149 275700790 18.380ms
IO count delay total delay average
0 0 0.000ms
SWAP count delay total delay average
0 0 0.000ms
RECLAIM count delay total delay average
0 0 0.000ms
THRASHING count delay total delay average
0 0 0.000ms
COMPACT count delay total delay average
0 0 0.000ms
WPCOPY count delay total delay average
36 7586118 0.211ms
IRQ count delay total delay average
42 929161 0.022ms
[1] commit 52b1364ba0b1("sched/psi: Add PSI_IRQ to track IRQ/SOFTIRQ pressure")
Link: https://lkml.kernel.org/r/202304081728353557233@zte.com.cn
Signed-off-by: Yang Yang <yang.yang29@zte.com.cn>
Cc: Jiang Xuexin <jiang.xuexin@zte.com.cn>
Cc: wangyong <wang.yong12@zte.com.cn>
Cc: junhua huang <huang.junhua@zte.com.cn>
Cc: Balbir Singh <bsingharora@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
This new test tests against the returned ioctls from UFFDIO_REGISTER,
where put into uffdio_register.ioctls.
This also tests the expected failure cases of UFFDIO_REGISTER, aka:
- Register with empty mode should fail with -EINVAL
- Register minor without page cache (anon) should fail with -EINVAL
Link: https://lkml.kernel.org/r/20230412164548.329376-1-peterx@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Dmitry Safonov <0x7f454c46@gmail.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: Zach O'Keefe <zokeefe@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The userfaultfd stress test never tested private shmem, which I think was
overlooked long due. Add it so it matches with uffd unit test and it'll
cover all memory supported with the three memory types.
Meanwhile, rename the memory types a bit. Considering shared mem is the
major use case for both shmem / hugetlbfs, changing from:
anon, hugetlb, hugetlb_shared, shmem
To (with shmem-private added):
anon, hugetlb, hugetlb-private, shmem, shmem-private
Add the shmem-private to run_vmtests.sh too.
Link: https://lkml.kernel.org/r/20230412164546.329355-1-peterx@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Dmitry Safonov <0x7f454c46@gmail.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: Zach O'Keefe <zokeefe@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
With the new uffd unit test covering the /dev/userfaultfd path and syscall
path of uffd initializations, we can safely drop the devnode test in the
old stress test.
One thing is to avoid duplication of running the stress test twice which is
an overkill to only test the /dev/ interface in run_vmtests.sh.
The other benefit is now all uffd tests (that uses userfaultfd_open) can
run automatically as long as any type of interface is enabled (either
syscall or dev), so it's more likely to succeed rather than fail due to
unprivilege.
With this patch lands, we can drop all the "mem_type:XXX" handlings too.
Link: https://lkml.kernel.org/r/20230412164525.329176-1-peterx@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Dmitry Safonov <0x7f454c46@gmail.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: Zach O'Keefe <zokeefe@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Allow skip a unit test properly due to no privilege (e.g. sigbus and
events tests).
[colin.i.king@gmail.com: fix spelling mistake "priviledge" -> "privilege"]
Link: https://lkml.kernel.org/r/20230414081506.1678998-1-colin.i.king@gmail.com
Link: https://lkml.kernel.org/r/20230412164520.329163-1-peterx@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Dmitry Safonov <0x7f454c46@gmail.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: Zach O'Keefe <zokeefe@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
