IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Update the 64s GENERIC_CPU option. POWER4 support has been dropped, so
make that clear in the option name. The POWER5_CPU option is dropped
because it's uncommon, and GENERIC_CPU covers it.
-mtune= before power8 is dropped because the minimum gcc version
supports power8, and tuning is made consistent between big and little
endian.
A 970 option is added for PowerPC 970 / G5 because they still have a
user base, and -mtune=power8 does not generate good code for the 970.
This also updates the ISA versions document to add Power4/Power4+
because I didn't realise Power4+ used 2.01.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Segher Boessenkool <segher@kernel.crashing.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220921014103.587954-2-npiggin@gmail.com
Big-endian GENERIC_CPU supports 970, but builds with -mcpu=power5.
POWER5 is ISA v2.02 whereas 970 is v2.01 plus Altivec. 2.02 added
the popcntb instruction which a compiler might use.
Use -mcpu=power4.
Fixes: 471d7ff8b51b ("powerpc/64s: Remove POWER4 support")
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Segher Boessenkool <segher@kernel.crashing.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220921014103.587954-1-npiggin@gmail.com
We want to move away from using SMT priority updates for cpu_relax, and
use a 'wait' instruction which is similar to x86. As well as being a
much better fit for what everybody else uses and tests with, priority
nops are stateful which is nasty (interrupts have to consider they might
be taken at a different priority), and they're expensive to execute,
similar to a mtSPR which can effect other threads in the pipe.
This has shown to give results that are less affected by code alignment
on benchmarks that cause a lot of spin waiting (e.g., rwsem contention
on unixbench filesystem benchmarks) on POWER10.
QEMU TCG only supports this instruction correctly since v7.1, versions
without the fix may cause hangs whne running POWER10 CPUs.
Reviewed-by: Segher Boessenkool <segher@kernel.crashing.org>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
[mpe: Fix checkpatch warnings RE the macros]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220920122259.363092-2-npiggin@gmail.com
The wait instruction encoding changed between ISA v2.07 and ISA v3.0.
In v3.1 the instruction gained a new field.
Update the PPC_WAIT macro to the current encoding. Rename the older
incompatible one with a _v203 suffix as it was introduced in v2.03
(the WC field was introduced in v2.07 but the kernel only uses WC=0).
Reviewed-by: Segher Boessenkool <segher@kernel.crashing.org>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220920122259.363092-1-npiggin@gmail.com
Setting DEC to maximum at the start of the timer interrupt is not
necessary and can be avoided for performance when MSR[EE] is not
enabled during the handler as explained in commit 0faf20a1ad16
("powerpc/64s/interrupt: Don't enable MSR[EE] in irq handlers unless
perf is in use"), where this change was first attempted.
The idea is that the timer interrupt runs with MSR[EE]=0, and at the end
of the interrupt DEC is programmed to the next timer interval, so there
is no need to clear the decrementer exception before then.
When the above commit was merged, that was not quite true. The low res
timer subsystem had some cases in the oneshot timer code where if the
tick was to be stopped and no timers active, the clock device would not
get the ->set_state_oneshot_stopped() call, so DEC would not get
reprogrammed, and this would hang taking continual timer interrupts.
So this was reverted in commit d2b9be1f4af5 ("powerpc/time: Always set
decrementer in timer_interrupt()"), which was a partial revert of the
above commit.
Commit 62c1256d5447 ("timers/nohz: Switch to ONESHOT_STOPPED in the
low-res handler when the tick is stopped") was later merged to fix this
missing case in the timer subsystem, so now the behaviour can be
restored.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220909142457.278032-1-npiggin@gmail.com
Currently powerpc early debugging contains lot of platform specific
options, but does not support standard UART / serial 16550 console.
Later legacy_serial.c code supports registering UART as early debug console
from device tree but it is not early during booting, but rather later after
machine description code finishes.
So for real early debugging via UART is current code unsuitable.
Add support for new early debugging option CONFIG_PPC_EARLY_DEBUG_16550
which enable Serial 16550 console on address defined by new option
CONFIG_PPC_EARLY_DEBUG_16550_PHYSADDR and by stride by option
CONFIG_PPC_EARLY_DEBUG_16550_STRIDE.
With this change it is possible to debug powerpc machine descriptor code.
For example this early debugging code can print on serial console also
"No suitable machine description found" error which is done before
legacy_serial.c code.
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220822231501.16827-1-pali@kernel.org
Since commit e641eb03ab2b0 ("powerpc: Fix up the kdump base cap to
128M") memory for kdump kernel has been reserved at an offset of 128MB.
This held up well for a long time before running into boot failure on
LPARs having a lot of cores. Commit 7c5ed82b800d8 ("powerpc: Set
crashkernel offset to mid of RMA region") fixed this boot failure by
moving the offset to mid of RMA region. This change meant the offset is
either 256MB or 512MB on LPARs as ppc64_rma_size was 512MB or 1024MB
owing to commit 103a8542cb35b ("powerpc/book3s64/ radix: Fix boot
failure with large amount of guest memory").
But ppc64_rma_size can be larger as well with newer f/w. So, limit
crashkernel reservation offset to 512MB to avoid running into boot
failures during kdump kernel boot, due to RTAS or other allocation
restrictions.
Also, while here, use SZ_128M instead of opening coding it.
Signed-off-by: Hari Bathini <hbathini@linux.ibm.com>
Tested-by: Sachin Sant <sachinp@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220912065031.57416-1-hbathini@linux.ibm.com
Implement syscall wrapper as per s390, x86, arm64. When enabled
cause handlers to accept parameters from a stack frame rather than
from user scratch register state. This allows for user registers to be
safely cleared in order to reduce caller influence on speculation
within syscall routine. The wrapper is a macro that emits syscall
handler symbols that call into the target handler, obtaining its
parameters from a struct pt_regs on the stack.
As registers are already saved to the stack prior to calling
system_call_exception, it appears that this function is executed more
efficiently with the new stack-pointer convention than with parameters
passed by registers, avoiding the allocation of a stack frame for this
method. On a 32-bit system, we see >20% performance increases on the
null_syscall microbenchmark, and on a Power 8 the performance gains
amortise the cost of clearing and restoring registers which is
implemented at the end of this series, seeing final result of ~5.6%
performance improvement on null_syscall.
Syscalls are wrapped in this fashion on all platforms except for the
Cell processor as this commit does not provide SPU support. This can be
quickly fixed in a successive patch, but requires spu_sys_callback to
allocate a pt_regs structure to satisfy the wrapped calling convention.
Co-developed-by: Andrew Donnellan <ajd@linux.ibm.com>
Signed-off-by: Andrew Donnellan <ajd@linux.ibm.com>
Signed-off-by: Rohan McLure <rmclure@linux.ibm.com>
Reviewed-by: Nicholas Piggin <npiggin@gmai.com>
[mpe: Make incompatible with COMPAT to retain clearing of high bits of args]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220921065605.1051927-22-rmclure@linux.ibm.com
Change system_call_exception arguments to pass a pointer to a stack
frame container caller state, as well as the original r0, which
determines the number of the syscall. This has been observed to yield
improved performance to passing them by registers, circumventing the
need to allocate a stack frame.
Signed-off-by: Rohan McLure <rmclure@linux.ibm.com>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
[mpe: Retain clearing of high bits of args for compat tasks]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220921065605.1051927-21-rmclure@linux.ibm.com
Cause syscall handlers to be typed as follows when called indirectly
throughout the kernel. This is to allow for better type checking.
typedef long (*syscall_fn)(unsigned long, unsigned long, unsigned long,
unsigned long, unsigned long, unsigned long);
Since both 32 and 64-bit abis allow for at least the first six
machine-word length parameters to a function to be passed by registers,
even handlers which admit fewer than six parameters may be viewed as
having the above type.
Coercing syscalls to syscall_fn requires a cast to void* to avoid
-Wcast-function-type.
Fixup comparisons in VDSO to avoid pointer-integer comparison. Introduce
explicit cast on systems with SPUs.
Signed-off-by: Rohan McLure <rmclure@linux.ibm.com>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220921065605.1051927-19-rmclure@linux.ibm.com
The table of syscall handlers and registered compatibility syscall
handlers has in past been produced using assembly, with function
references resolved at link time. This moves link-time errors to
compile-time, by rewriting systbl.S in C, and including the
linux/syscalls.h, linux/compat.h and asm/syscalls.h headers for
prototypes.
Reported-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Rohan McLure <rmclure@linux.ibm.com>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220921065605.1051927-18-rmclure@linux.ibm.com
Forward declare all syscall handler prototypes where a generic prototype
is not provided in either linux/syscalls.h or linux/compat.h in
asm/syscalls.h. This is required for compile-time type-checking for
syscall handlers, which is implemented later in this series.
32-bit compatibility syscall handlers are expressed in terms of types in
ppc32.h. Expose this header globally.
Signed-off-by: Rohan McLure <rmclure@linux.ibm.com>
Acked-by: Nicholas Piggin <npiggin@gmail.com>
[mpe: Use standard include guard naming for syscalls_32.h]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220921065605.1051927-17-rmclure@linux.ibm.com
Arch-specific implementations of syscall handlers are currently used
over generic implementations for the following reasons:
1. Semantics unique to powerpc
2. Compatibility syscalls require 'argument padding' to comply with
64-bit argument convention in ELF32 abi.
3. Parameter types or order is different in other architectures.
These syscall handlers have been defined prior to this patch series
without invoking the SYSCALL_DEFINE or COMPAT_SYSCALL_DEFINE macros with
custom input and output types. We remove every such direct definition in
favour of the aforementioned macros.
Also update syscalls.tbl in order to refer to the symbol names generated
by each of these macros. Since ppc64_personality can be called by both
64 bit and 32 bit binaries through compatibility, we must generate both
both compat_sys_ and sys_ symbols for this handler.
As an aside:
A number of architectures including arm and powerpc agree on an
alternative argument order and numbering for most of these arch-specific
handlers. A future patch series may allow for asm/unistd.h to signal
through its defines that a generic implementation of these syscall
handlers with the correct calling convention be emitted, through the
__ARCH_WANT_COMPAT_SYS_... convention.
Signed-off-by: Rohan McLure <rmclure@linux.ibm.com>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220921065605.1051927-16-rmclure@linux.ibm.com
Avoid duplication in future patch that will define the ppc64_personality
syscall handler in terms of the SYSCALL_DEFINE and COMPAT_SYSCALL_DEFINE
macros, by extracting the common body of ppc64_personality into a helper
function.
Signed-off-by: Rohan McLure <rmclure@linux.ibm.com>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220921065605.1051927-15-rmclure@linux.ibm.com
Syscall handlers should not be invoked internally by their symbol names,
as these symbols defined by the architecture-defined SYSCALL_DEFINE
macro. Move the compatibility syscall definition for mmap2 to
syscalls.c, so that all mmap implementations can share a helper function.
Remove 'inline' on static mmap helper.
Signed-off-by: Rohan McLure <rmclure@linux.ibm.com>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
[mpe: Fix compat_sys_mmap2() prototype and offset handling]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220921065605.1051927-14-rmclure@linux.ibm.com
Stolen time logging in dtl was removed from the P9 path, so guests had
no stolen time accounting. Add it back in a simpler way that still
avoids locks and per-core accounting code.
Fixes: ecb6a7207f92 ("KVM: PPC: Book3S HV P9: Remove most of the vcore logic")
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220908132545.4085849-4-npiggin@gmail.com
Update the guest state and timing entry/exit accounting to use the new
API, which was introduced following issues found[1]. KVM HV does
possibly call instrumented code inside the guest context, and it does
call srcu inside the guest context which is fragile at best.
Switch to the new API, moving the guest context inside the
srcu_read_lock/unlock region.
[1] https://lore.kernel.org/lkml/20220201132926.3301912-1-mark.rutland@arm.com/
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220908132545.4085849-3-npiggin@gmail.com
kvmhv_run_single_vcpu() disables PMIs as well as Linux irqs,
however the tick time accounting code enables and disables irqs and
not PMIs within this region. By chance this might not actually cause
a bug, but it is clearly an incorrect use of the APIs.
Fixes: 2251fbe76395e ("KVM: PPC: Book3S HV P9: Improve mtmsrd scheduling by delaying MSR[EE] disable")
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220908132545.4085849-2-npiggin@gmail.com
On guest entry, vcpu->cpu and vcpu->arch.thread_cpu are set after
disabling host irqs. On guest exit there is a window whre tick time
accounting briefly enables irqs before these fields are cleared.
Move them up to ensure they are cleared before host irqs are run.
This is possibly not a problem, but is more symmetric and makes the
fields less surprising.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220908132545.4085849-1-npiggin@gmail.com
We used to have a workaround[1] for a hang during migration that was
made ineffective when we converted the decrementer expiry to be
relative to guest timebase.
The point of the workaround was that in the absence of an explicit
decrementer expiry value provided by userspace during migration, KVM
needs to initialize dec_expires to a value that will result in an
expired decrementer after subtracting the current guest timebase. That
stops the vcpu from hanging after migration due to a decrementer
that's too large.
If the dec_expires is now relative to guest timebase, its
initialization needs to be guest timebase-relative as well, otherwise
we end up with a decrementer expiry that is still larger than the
guest timebase.
1- https://git.kernel.org/torvalds/c/5855564c8ab2
Fixes: 3c1a4322bba7 ("KVM: PPC: Book3S HV: Change dec_expires to be relative to guest timebase")
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220816222517.1916391-1-farosas@linux.ibm.com
Syscall handlers should not be invoked internally by their symbol names,
as these symbols defined by the architecture-defined SYSCALL_DEFINE
macro. Fortunately, in the case of ppc64_personality, its call to
sys_personality can be replaced with an invocation to the
equivalent ksys_personality inline helper in <linux/syscalls.h>.
Signed-off-by: Rohan McLure <rmclure@linux.ibm.com>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220921065605.1051927-13-rmclure@linux.ibm.com
Syscall #82 has been implemented for 32-bit platforms in a unique way on
powerpc systems. This hack will in effect guess whether the caller is
expecting new select semantics or old select semantics. It does so via a
guess, based off the first parameter. In new select, this parameter
represents the length of a user-memory array of file descriptors, and in
old select this is a pointer to an arguments structure.
The heuristic simply interprets sufficiently large values of its first
parameter as being a call to old select. The following is a discussion
on how this syscall should be handled.
As discussed in this thread, the existence of such a hack suggests that for
whatever powerpc binaries may predate glibc, it is most likely that they
would have taken use of the old select semantics. x86 and arm64 both
implement this syscall with oldselect semantics.
Remove the powerpc implementation, and update syscall.tbl to refer to emit
a reference to sys_old_select and compat_sys_old_select
for 32-bit binaries, in keeping with how other architectures support
syscall #82.
Signed-off-by: Rohan McLure <rmclure@linux.ibm.com>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/lkml/13737de5-0eb7-e881-9af0-163b0d29a1a0@csgroup.eu/
Link: https://lore.kernel.org/r/20220921065605.1051927-12-rmclure@linux.ibm.com
The powerpc fallocate compat syscall handler is identical to the
generic implementation provided by commit 59c10c52f573f ("riscv:
compat: syscall: Add compat_sys_call_table implementation"), and as
such can be removed in favour of the generic implementation.
A future patch series will replace more architecture-defined syscall
handlers with generic implementations, dependent on introducing generic
implementations that are compatible with powerpc and arm's parameter
reorderings.
Reported-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Rohan McLure <rmclure@linux.ibm.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220921065605.1051927-11-rmclure@linux.ibm.com
32-bit ABIs support passing 64-bit integers by registers via argument
translation. Commit 59c10c52f573 ("riscv: compat: syscall: Add
compat_sys_call_table implementation") implements the compat_arg_u64
macro for efficiently defining little endian compatibility syscalls.
Architectures supporting big endianness may benefit from reciprocal
argument translation, but are welcome also to implement their own.
Signed-off-by: Rohan McLure <rmclure@linux.ibm.com>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Arnd Bergmann <arnd@anrdb.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220921065605.1051927-10-rmclure@linux.ibm.com
As reported[1] by Arnd, the arch-specific fadvise64_64 and fallocate
compatibility handlers assume parameters are passed with 32-bit
big-endian ABI. This affects the assignment of odd-even parameter pairs
to the high or low words of a 64-bit syscall parameter.
Fix fadvise64_64 fallocate compat handlers to correctly swap upper/lower
32 bits conditioned on endianness.
A future patch will replace the arch-specific compat fallocate with an
asm-generic implementation. This patch is intended for ease of
back-port.
[1]: https://lore.kernel.org/all/be29926f-226e-48dc-871a-e29a54e80583@www.fastmail.com/
Fixes: 57f48b4b74e7 ("powerpc/compat_sys: swap hi/lo parts of 64-bit syscall args in LE mode")
Reported-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Rohan McLure <rmclure@linux.ibm.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220921065605.1051927-9-rmclure@linux.ibm.com
Interrupt handlers on 64s systems will often need to save register state
from the interrupted process to make space for loading special purpose
registers or for internal state.
Fix a comment documenting a common code path macro in the beginning of
interrupt handlers where r10 is saved to the PACA to afford space for
the value of the CFAR. Comment is currently written as if r10-r12 are
saved to PACA, but in fact only r10 is saved, with r11-r12 saved much
later. The distance in code between these saves has grown over the many
revisions of this macro. Fix this by signalling with a comment where
r11-r12 are saved to the PACA.
Signed-off-by: Rohan McLure <rmclure@linux.ibm.com>
Reported-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220921065605.1051927-8-rmclure@linux.ibm.com
The common interrupt handler prologue macro and the bad_stack
trampolines include consecutive sequences of register saves, and some
register clears. Neaten such instances by expanding use of the SAVE_GPRS
macro and employing the ZEROIZE_GPR macro when appropriate.
Also simplify an invocation of SAVE_GPRS targetting all non-volatile
registers to SAVE_NVGPRS.
Signed-off-by: Rohan McLure <rmclure@linux.ibm.com>
Reported-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220921065605.1051927-7-rmclure@linux.ibm.com
Restoring the register state of the interrupted thread involves issuing
a large number of predictable loads to the kernel stack frame. Issue the
REST_GPR{,S} macros to clearly signal when this is happening, and bunch
together restores at the end of the interrupt handler where the saved
value is not consumed earlier in the handler code.
Signed-off-by: Rohan McLure <rmclure@linux.ibm.com>
Reported-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220921065605.1051927-6-rmclure@linux.ibm.com
Use the convenience macros for saving/clearing/restoring gprs in keeping
with syscall calling conventions. The plural variants of these macros
can store a range of registers for concision.
This works well when the user gpr value we are hoping to save is still
live. In the syscall interrupt handlers, user register state is
sometimes juggled between registers. Hold-off from issuing the SAVE_GPR
macro for applicable neighbouring lines to highlight the delicate
register save logic.
Signed-off-by: Rohan McLure <rmclure@linux.ibm.com>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220921065605.1051927-5-rmclure@linux.ibm.com
Provide register zeroing macros, following the same convention as
existing register stack save/restore macros, to be used in later
change to concisely zero a sequence of consecutive gprs.
The resulting macros are called ZEROIZE_GPRS and ZEROIZE_NVGPRS, keeping
with the naming of the accompanying restore and save macros, and usage
of zeroize to describe this operation elsewhere in the kernel.
Signed-off-by: Rohan McLure <rmclure@linux.ibm.com>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220921065605.1051927-4-rmclure@linux.ibm.com
This reverts commit 8875f47b7681 ("powerpc/syscall: Save r3 in regs->orig_r3
").
Save caller's original r3 state to the kernel stackframe before entering
system_call_exception. This allows for user registers to be cleared by
the time system_call_exception is entered, reducing the influence of
user registers on speculation within the kernel.
Prior to this commit, orig_r3 was saved at the beginning of
system_call_exception. Instead, save orig_r3 while the user value is
still live in r3.
Also replicate this early save in 32-bit. A similar save was removed in
commit 6f76a01173cc ("powerpc/syscall: implement system call entry/exit
logic in C for PPC32") when 32-bit adopted system_call_exception. Revert
its removal of orig_r3 saves.
Signed-off-by: Rohan McLure <rmclure@linux.ibm.com>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220921065605.1051927-3-rmclure@linux.ibm.com
The asmlinkage macro has no special meaning in powerpc, and prior to
this patch is used sporadically on some syscall handler definitions. On
architectures that do not define asmlinkage, it resolves to extern "C"
for C++ compilers and a nop otherwise. The current invocations of
asmlinkage provide far from complete support for C++ toolchains, and so
the macro serves no purpose in powerpc.
Remove all invocations of asmlinkage in arch/powerpc. These incidentally
only occur in syscall definitions and prototypes.
Signed-off-by: Rohan McLure <rmclure@linux.ibm.com>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Andrew Donnellan <ajd@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220921065605.1051927-2-rmclure@linux.ibm.com
This partialy reapply commit ef5b570d3700 ("powerpc/irq: Don't
open code irq_soft_mask helpers") which was reverted by
commit 684c68d92e2e ("Revert "powerpc/irq: Don't open code
irq_soft_mask helpers"")
irq_soft_mask_set_return() and irq_soft_mask_or_return()
are overset of irq_soft_mask_set().
Have them use irq_soft_mask_set() instead of duplicating it.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/18473da42362ee8f07bce36b9caef8ba77d7633f.1663656054.git.christophe.leroy@csgroup.eu
Today there is:
if e500 or 8xx
if e500
mmu_psize_defs[] =
else if 8xx
mmu_psize_defs[] =
else
mmu_psize_defs[] =
endif
endif
The else leg is dead definition.
Drop that else leg and rewrite as:
if e500
mmu_psize_defs[] =
endif
if 8xx
mmu_psize_defs[] =
endif
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/030a843449f348c0b709ca5349640624f36a016f.1663606876.git.christophe.leroy@csgroup.eu
e500 idle setup is a bit messy.
e500_idle() is used for PPC32 while book3e_idle() is used for PPC64.
As they are mutually exclusive, call them all e500_idle().
Use CONFIG_MPC_85xx instead of PPC32 + E500 in Makefile and rename
idle_e500.c to idle_85xx.c .
Rename idle_book3e.c to idle_64e.c and remove #ifdef PPC64 in
as it's only built on PPC64.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/8039301334e948974c85ec5ef2db37751075185b.1663606876.git.christophe.leroy@csgroup.eu
PPC_85xx and PPC_BOOK3E_64 already select E500 so no need
to select it again by PPC_QEMU_E500 and CORENET_GENERIC
as they depend on PPC_85xx || PPC_BOOK3E_64.
PPC_BOOK3E_64 already selects E500MC so no need to
select it again by PPC_QEMU_E500 if PPC64, PPC_BOOK3E_64
is the only way into PPC_QEMU_E500 with PPC64.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/44f03fa1506892fabf626dceb2f47a049908b6af.1663606876.git.christophe.leroy@csgroup.eu
PPC_85xx is PPC32 only.
PPC_85xx always selects E500 and is the only PPC32 that
selects E500.
FSL_BOOKE is selected when E500 and PPC32 are selected.
So FSL_BOOKE is redundant with PPC_85xx.
Remove FSL_BOOKE.
And rename four files accordingly.
cpu_setup_fsl_booke.S is not renamed because it is linked to
PPC_FSL_BOOK3E and not to FSL_BOOKE as suggested by its name.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/08e3e15594e66d63b9e89c5b4f9c35153913c28f.1663606875.git.christophe.leroy@csgroup.eu
cpu_specs[] is full of #ifdefs depending on the different
types of CPU.
CPUs are mutually exclusive, it is therefore possible to split
cpu_specs[] into smaller more readable pieces.
Create cpu_specs_XXX.h that will each be dedicated on one
of the following mutually exclusive families:
- 40x
- 44x
- 47x
- 8xx
- e500
- book3s/32
- book3s/64
In book3s/32, the block for 603 has been moved in front in order
to not have two 604 blocks.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
[mpe: Fix CONFIG_47x to be CONFIG_PPC_47x, tweak some formatting]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/a44b865e0318286155273b10cdf524ab697928c1.1663606875.git.christophe.leroy@csgroup.eu
