IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
All jounal_buf bitfield updates must happen under the journal lock -
perhaps we should just switch these to atomic bit flags.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Buckets usually can't be discarded until the transaction that made them
empty has been committed in the journal.
Tracing has indicated that we're queuing the discard worker excessively,
only for it to skip over many buckets that are still waiting on a
journal commit, discarding only one or two buckets per iteration.
We want to switch to only queuing the discard worker after a journal
flush write, but there's an important optimization we need to preserve:
if a bucket becomes empty and it was never committed in the journal
while it was in use, we want to discard it and reuse it right away -
since overwriting it before the previous writes are flushed from the
device cache eans those writes only cost bus bandwidth.
So, this patch implements a fast path for buckets that can be discarded
right away. We need new locking between the two discard workers; the new
list of buckets being discarded provides that locking.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
If a path doesn't have any active references, we shouldn't downgrade it;
it'll either be reused, possibly with intent refs again, or dropped at
bch2_trans_begin() time.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Now that checking subvolume structure is a separate pass, the main
check_directory_connectivity() pass only needs to walk up to a given
inode's subvolume root.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
This is needed for building Rust bindings on big endian architectures
like s390x. Currently this is only done in userspace, but it might
happen in-kernel in the future. When creating a Rust binding for struct
bkey, the "packed" attribute is needed to get a type with the correct
member offsets in the big endian case. However, rustc does not allow
types to have both a "packed" and "align" attribute. Thus, in order to
get a Rust type compatible with the C type, we must omit the "aligned"
attribute in C.
This does not affect the struct's size or member offsets, only its
toplevel alignment, which should be an acceptable impact.
The little endian version can have the "align" attribute because the
"packed" attr is redundant, and rust-bindgen will omit the "packed" attr
when an "align" attr is present and it can do so without changing a
type's layout
Signed-off-by: Thomas Bertschinger <tahbertschinger@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
bch2_trigger_alloc() kicks off certain tasks on bucket state changes;
e.g. triggering the bucket discard worker and the invalidate worker.
We've observed the discard worker running too often - most runs it
doesn't do any work, according to the tracepoint - so clearly, we're
kicking it off too often.
This adds an explicit statechange() macro to make these checks more
precise.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
THis silences a mm/page_alloc.c warning about allocating more than a
page with GFP_NOFAIL - and there's no reason for this to not have a
vmalloc fallback anyways.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
When bch2_btree_iter_peek_slot() clones the iterator to search for the
next key, and then discovers that the key from the cloned iterator is
the key we want to return - we also want to save the
iter->key_cache_path as well, for the update path.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Various phases of fsck involve checking references from one btree to
another: this means doing a sequential scan of one btree, and then
mostly random access into the second.
This is particularly painful for checking extents <-> backpointers; we
can prefetch btree node access on the sequential scan, but not on the
random access portion, and this is particularly painful on spinning
rust, where we'd like to keep the pipeline fairly full of btree node
reads so that the elevator can reduce seeking.
This patch implements prefetching and pinning of the portion of the
btree that we'll be doing random access to. We already calculate how
much of the random access btree will fit in memory so it's a fairly
straightforward change.
This will put more pressure on system memory usage, so we introduce a
new option, fsck_memory_usage_percent, which is the percentage of total
system ram that fsck is allowed to pin.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Add a btree to record a parent -> child subvolume relationships,
according to the filesystem heirarchy.
The subvolume_children btree is a bitset btree: if a bit is set at pos
p, that means p.offset is a child of subvolume p.inode.
This will be used for efficiently listing subvolumes, as well as
recursive deletion.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Provide a non-write buffer version of bch2_btree_bit_mod_buffered(), for
the subvolume children btree.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Subvolumes need special handling to reattach - we always reattach them
in the root subvolume's lost+found, and they need a slightly different
kind of dirent.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Check that d_parent_subvol makes sense - the dirent's snapshot must be
visible in d_parent_subvol (i.e. an ancestor of d_parent_subvol's
snapshot) in order to be visible.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
check that if an inode has a backpointer, the dirent it points to points
back to it.
We do this in check_dirent_inode_dirent(), but only for inodes that have
dirents that point to them - we also have to do the check starting from
the inode to catch inodes that don't have dirents that point to them.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Subvolumes and subvolume root inodes point to each other: this verifies
the subvolume -> inode -> subvolme path.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
This converts -EIOs related to btree node errors to private error codes,
which will help with some ongoing debugging by giving us better error
messages.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Add a flush op, to return the exit code via close().
Also update bcachefs usage to use this to return fsck exit codes.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Make it so that a thread_with_stdio user can handle ioctls against the
file descriptor.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Create an ops structure so we can add more file-based functionality in
the next few patches.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Experimentally fix some problems with stdio_redirect_vprintf by creating
a MOO variant with which we can experiment. We can't do a GFP_KERNEL
allocation while holding the spinlock, and I don't like how the printf
function can silently truncate the output if memory allocation fails.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Create a new run_thread_with_stdout function that opens a file in
O_RDONLY mode so that the kernel can write things to userspace but
userspace cannot write to the kernel. This will be used to convey xfs
health event information to userspace.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
This fixes a bug where we'd return data without waiting for a newline,
if data was present but a newline was not.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Move the cleanup code to a wrapper function, where we can call it after
the thread_with_stdio fn exits.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
- eliminate the dependency on printbufs, so that we can lift
thread_with_file for use in xfs
- add a nonblocking parameter to stdio_redirect_printf(), and either
block if the buffer is full or drop it on the floor - don't buffer
infinitely
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
The output buffer lock has to be a spinlock so that we can write to it
from interrupt context, so we can't use a direct copy_to_user; this
switches thread_with_file_read() to use fault_in_writeable() and
copy_to_user_nofault(), similar to how thread_with_file_write() works.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
