linux

iv/linux

Fork 0

Commit Graph

Author	SHA1	Message	Date
Tony Lindgren	259a24001a	phy: cpcap-usb: Fix missing return statement Commit 8ae904e3c236 ("phy: cpcap-usb: Add CPCAP PMIC USB support") is missing return statement as noted by Colin Ian King <colin.king@canonical.com>. If the optional pins are not configured, we just want to return early and not attempt to configure the pins. Fixes: 8ae904e3c236 ("phy: cpcap-usb: Add CPCAP PMIC USB support") Reported-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>	2017-06-16 11:40:21 +05:30
Arnd Bergmann	d05c07c6fa	phy: cpcap-usb: add MUSB dependency When MUSB is a loadable module, we get a link error for a built-in CPCAP driver: drivers/phy/built-in.o: In function `cpcap_usb_phy_remove': phy-cpcap-usb.c:(.text+0xed9): undefined reference to `musb_mailbox' This adds a Kconfig dependency to prevent this broken configuration, enforcing that CPCAP can only be a module when MUSB is also a module. Fixes: 68a1f7c9d470 ("phy: cpcap-usb: Add CPCAP PMIC USB support") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>	2017-06-09 17:39:39 +05:30
Tony Lindgren	6d6ce40f63	phy: cpcap-usb: Add CPCAP PMIC USB support Some Motorola phones like droid 4 use a custom CPCAP PMIC that has a multiplexing USB PHY. This USB PHY can operate at least in four modes using pin multiplexing and two control GPIOS: - Pass through companion PHY for the SoC USB PHY - ULPI PHY for the SoC - Pass through USB for the modem - UART debug console for the SoC This patch adds support for droid 4 USB PHY and debug UART modes, support for other modes can be added later on as needed. Both peripheral and host mode are working for the USB. The host mode depends on the cpcap-charger driver for VBUS. VBUS and ID pin detection are done using cpcap-adc IIO ADC driver. Cc: devicetree@vger.kernel.org Cc: Marcel Partap <mpartap@gmx.net> Cc: Michael Scott <michael.scott@linaro.org> Acked-by: Rob Herring <robh@kernel.org> Tested-by: Sebastian Reichel <sre@kernel.org> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>	2017-06-06 14:50:21 +05:30

Author

SHA1

Message

Date

Tony Lindgren

259a24001a

phy: cpcap-usb: Fix missing return statement

Commit 8ae904e3c236 ("phy: cpcap-usb: Add CPCAP PMIC USB support")
is missing return statement as noted by Colin Ian King
<colin.king@canonical.com>. If the optional pins are not configured,
we just want to return early and not attempt to configure the pins.

Fixes: 8ae904e3c236 ("phy: cpcap-usb: Add CPCAP PMIC USB support")
Reported-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>

2017-06-16 11:40:21 +05:30

Arnd Bergmann

d05c07c6fa

phy: cpcap-usb: add MUSB dependency

When MUSB is a loadable module, we get a link error for a built-in
CPCAP driver:

drivers/phy/built-in.o: In function `cpcap_usb_phy_remove':
phy-cpcap-usb.c:(.text+0xed9): undefined reference to `musb_mailbox'

This adds a Kconfig dependency to prevent this broken configuration,
enforcing that CPCAP can only be a module when MUSB is also a module.

Fixes: 68a1f7c9d470 ("phy: cpcap-usb: Add CPCAP PMIC USB support")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>

2017-06-09 17:39:39 +05:30

Tony Lindgren

6d6ce40f63

phy: cpcap-usb: Add CPCAP PMIC USB support

Some Motorola phones like droid 4 use a custom CPCAP PMIC that has a
multiplexing USB PHY.

This USB PHY can operate at least in four modes using pin multiplexing
and two control GPIOS:

- Pass through companion PHY for the SoC USB PHY
- ULPI PHY for the SoC
- Pass through USB for the modem
- UART debug console for the SoC

This patch adds support for droid 4 USB PHY and debug UART modes,
support for other modes can be added later on as needed.

Both peripheral and host mode are working for the USB. The
host mode depends on the cpcap-charger driver for VBUS.

VBUS and ID pin detection are done using cpcap-adc IIO ADC
driver.

Cc: devicetree@vger.kernel.org
Cc: Marcel Partap <mpartap@gmx.net>
Cc: Michael Scott <michael.scott@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Tested-by: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>

2017-06-06 14:50:21 +05:30

3 Commits