IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Move aggregation stats array per-phy instead of share it between multiple
interfaces. This is a preliminary patch to add mt7996 driver support.
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
This is a preliminary patch to move aggr_stats array in mt76_phy
structure.
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Similar to mt7915, fix stats clash between bins [4-7] in 802.11 tx
aggregation histogram.
Fixes: 163f4d22c118d ("mt76: mt7921: add MAC support")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
This adds selectable RTC/CTS enablement for each interface.
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
This adds selectable RTC/CTS enablement for each interface.
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Due to information missing, the firmware may be fail on bandwidth
related settings in mt7921/mt7922. Add new cmd STA_REC_HE_V2 to apply
additional capabilities in 6GHz band.
Tested-by: Ben Greear <greearb@candelatech.com>
Co-developed-by: Deren Wu <deren.wu@mediatek.com>
Signed-off-by: Deren Wu <deren.wu@mediatek.com>
Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
This reports signal strength of ACK packets from the peer as measured
at each interface.
Tested-by: Shurong Wen <shurong.wen@mediatek.com>
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
The MIB INFO command is fetching MIB_BUSY_TIME, MIB_TX_TIME, MIB_RX_TIME and
MIB_OBSS_AIRTIME from the radio and filling out cc_busy, cc_tx, cc_bss_rx
and cc_rx respectively.
busy should be >= tx + rx >= tx + bss_rx but we don’t always quite see this.
Sometimes tx + rx is a bit higher than busy due to inaccurate accounting,
so this patch recalculates numbers to make them more reasonable.
Reported-By: Kevin Schneider <kevin.schneider@adtran.com>
Tested-by: Kevin Schneider <kevin.schneider@adtran.com>
Tested-by: Chad Monroe <chad.monroe@smartrg.com>
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
This reverts commit f17f4864504d754bcbf31e4c89412cdf9946c409 and adds the
MT_DRV_AMSDU_OFFLOAD flag for MT7921 USB/SDIO
The reverted commit significantly decreases performance when running
a test where two MT7915 radios have 16 station vdevs each, configured
for AC mode, and transmitting UDP traffic to AP.
Co-developed-by: Felix Fietkau <nbd@nbd.name>
Reported-by: Carson Vandegriffe <carson.vandegriffe@candelatech.com>
Signed-off-by: Ben Greear <greearb@candelatech.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Enable WED tx support for mt7986-wmac chipset available on mt7986 board.
Tested-by: Daniel Golle <daniel@makrotopia.org>
Co-developed-by: Bo Jiao <Bo.Jiao@mediatek.com>
Signed-off-by: Bo Jiao <Bo.Jiao@mediatek.com>
Co-developed-by: Sujuan Chen <sujuan.chen@mediatek.com>
Signed-off-by: Sujuan Chen <sujuan.chen@mediatek.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Introduce wed tx support for MT7986 chipset
Tested-by: Daniel Golle <daniel@makrotopia.org>
Co-developed-by: Bo Jiao <Bo.Jiao@mediatek.com>
Signed-off-by: Bo Jiao <Bo.Jiao@mediatek.com>
Co-developed-by: Sujuan Chen <sujuan.chen@mediatek.com>
Signed-off-by: Sujuan Chen <sujuan.chen@mediatek.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
This is a preliminary patch to enable wed support for mt7986-wmac
chipset.
Tested-by: Daniel Golle <daniel@makrotopia.org>
Co-developed-by: Bo Jiao <Bo.Jiao@mediatek.com>
Signed-off-by: Bo Jiao <Bo.Jiao@mediatek.com>
Co-developed-by: Sujuan Chen <sujuan.chen@mediatek.com>
Signed-off-by: Sujuan Chen <sujuan.chen@mediatek.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Correct mac timiing settings for different hardware generations.
This improves 40-60Mbps performance.
Fixes: 9aac2969fe5f ("mt76: mt7915: update mac timing settings")
Reported-By: Carson Vandegriffe <carson.vandegriffe@candelatech.com>
Tested-by: Chad Monroe <chad.monroe@smartrg.com>
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
For MT7915D, correct antenna index should be set to let DFS radar
detection work on the 5 GHz band.
Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
In previous, we only allow user to configure tx antenna mask
contiguously (e.g. 0x3, 0xf).
This patch allows user to configure tx antenna mask interleavingly
(e.g. 0x5, 0x8). By setting proper antenna mask and nss, user can
prioritized the signal of different antennas, which helps to test
their performance in normal mode.
Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Add mt76_connac_spe_idx() for antenna mask to spatial extension
index conversion. This is used to support flexible control of
tx antenna.
Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Let the configuration of testmode antenna mask on both band0 and band1
become antenna_mask rather than chainmask. This could simplify the
settings for user and get rid of the conversion when sending fw command.
Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
A variant of mt7916 supports up to 3 tx/rx paths but with only
2 spatial streams. An example usage of the 3rd path is to server as
an auxiliary for beamforming.
In order to deal with this case, this patch reworks some parts to
correctly use paths or streams.
Signed-off-by: Peter Chiu <chui-hao.chiu@mediatek.com>
Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Rework tx paths and streams init part to improve readability, and make
sure that the available tx streams should be smaller than or equal to
the available tx paths.
Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
The value of regidx of rf registers is combined with WF selection and
offset. Extend the WF selection field from 4 to 8 bits since the
adie index should also be specified.
Signed-off-by: Evelyn Tsai <evelyn.tsai@mediatek.com>
Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
According to the tx-free-done documentation, the DW4 can be repeated,
so have to be more careful about how we test for walking off the
end of the array.
Signed-off-by: Ben Greear <greearb@candelatech.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
All uses of mt76_wcid_mask_test() have
been removed since commit 8950a62f19c9 ("mt76: get rid of
mt76_wcid_hw routine"), so remove it.
Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Group 3 in RxD is disabled in monitor mode. We should use the group 5 in
RxD instead to fix antenna signal way off issue, e.g we would see the
incorrect antenna signal value in wireshark. On the other hand, Group 5
wouldn't be used in STA or AP mode, so the patch shouldn't cause any
harm to those modes.
Fixes: cbaa0a404f8d ("mt76: mt7921: fix up the monitor mode")
Reported-by: Adrian Granados <agranados@gmail.com>
Co-developed-by: Deren Wu <deren.wu@mediatek.com>
Signed-off-by: Deren Wu <deren.wu@mediatek.com>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
- remove stbc, because mt76x0 doesn't support it and mt76x2 uses the same
values as HT/VHT
- reduce vht array to 2 elements, because VHT MCS0-7 are the same as HT
Signed-off-by: Felix Fietkau <nbd@nbd.name>
ieee80211_drop_unencrypted is called from ieee80211_rx_h_mesh_fwding and
ieee80211_frame_allowed.
Since ieee80211_rx_h_mesh_fwding can forward packets for other mesh nodes
and is called earlier, it needs to check the decryptions status and if the
packet is using the control protocol on its own, instead of deferring to
the later call from ieee80211_frame_allowed.
Because of that, ieee80211_drop_unencrypted has a mesh specific check
that skips over the mesh header in order to check the payload protocol.
This code is invalid when called from ieee80211_frame_allowed, since that
happens after the 802.11->802.3 conversion.
Fix this by moving the mesh specific check directly into
ieee80211_rx_h_mesh_fwding.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Link: https://lore.kernel.org/r/20221201135730.19723-1-nbd@nbd.name
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
This can be used to selectively disable feature flags for checksum offload,
scatter/gather or GSO by changing vif->netdev_features.
Removing features from vif->netdev_features does not affect the netdev
features themselves, but instead fixes up skbs in the tx path so that the
offloads are not needed in the driver.
Aside from making it easier to deal with vif type based hardware limitations,
this also makes it possible to optimize performance on hardware without native
GSO support by declaring GSO support in hw->netdev_features and removing it
from vif->netdev_features. This allows mac80211 to handle GSO segmentation
after the sta lookup, but before itxq enqueue, thus reducing the number of
unnecessary sta lookups, as well as some other per-packet processing.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Link: https://lore.kernel.org/r/20221010094338.78070-1-nbd@nbd.name
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Updates to the TIM information element to match changes made in the
IEEE Std 802.11ah-2020.
Signed-off-by: Kieran Frewen <kieran.frewen@morsemicro.com>
Co-developed-by: Gilad Itzkovitch <gilad.itzkovitch@morsemicro.com>
Signed-off-by: Gilad Itzkovitch <gilad.itzkovitch@morsemicro.com>
Link: https://lore.kernel.org/r/20221106221602.25714-1-gilad.itzkovitch@morsemicro.com
[use skb_put_data/skb_put_u8]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
It's not valid to have the multiple BSSID element in the
association response (per 802.11 REVme D1.0), so don't
try to parse it there, but only in the fallback beacon
elements if needed.
The other case that was parsing association requests was
already changed in a previous commit.
Change-Id: I659d2ef1253e079cc71c46a017044e116e31c024
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
There's no need to open-code container_of() when we have
bss_from_pub(). Use it.
Change-Id: I074723717909ba211a40e6499f0c36df0e2ba4be
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The call to ieee80211_do_stop() right after will also do
synchronize_rcu() to ensure the SDATA_STATE_RUNNING bit
is cleared, so we don't need to synchronize_net() here.
Change-Id: Id9f9ffcf195002013e5d9fde288877d219780864
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
ieee80211_get_txq() can only be called with vif != NULL.
Remove not needed NULL test in function.
Signed-off-by: Alexander Wetzel <alexander@wetzel-home.de>
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <error27@gmail.com>
Link: https://lore.kernel.org/r/20221107161328.2883-1-alexander@wetzel-home.de
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
In regulatory_init_db(), when it's going to return a error, reg_pdev
should be unregistered. When load_builtin_regdb_keys() fails it doesn't
do it and makes cfg80211 can't be reload with report:
sysfs: cannot create duplicate filename '/devices/platform/regulatory.0'
...
<TASK>
dump_stack_lvl+0x79/0x9b
sysfs_warn_dup.cold+0x1c/0x29
sysfs_create_dir_ns+0x22d/0x290
kobject_add_internal+0x247/0x800
kobject_add+0x135/0x1b0
device_add+0x389/0x1be0
platform_device_add+0x28f/0x790
platform_device_register_full+0x376/0x4b0
regulatory_init+0x9a/0x4b2 [cfg80211]
cfg80211_init+0x84/0x113 [cfg80211]
...
Fixes: 90a53e4432b1 ("cfg80211: implement regdb signature checking")
Signed-off-by: Chen Zhongjin <chenzhongjin@huawei.com>
Link: https://lore.kernel.org/r/20221109090237.214127-1-chenzhongjin@huawei.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
If the "channel->freq_offset" comparison is omitted in cmp_bss(),
BSS with different kHz units cannot be distinguished in the S1G Band.
So "freq_offset" should also be included in the comparison.
Signed-off-by: JUN-KYU SHIN <jk.shin@newratek.com>
Link: https://lore.kernel.org/r/20221111023301.6395-1-jk.shin@newratek.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
In ieee80211_lookup_key, the variable named `local` is unused if
compiled without lockdep, getting this warning:
net/mac80211/cfg.c: In function ‘ieee80211_lookup_key’:
net/mac80211/cfg.c:542:26: error: unused variable ‘local’ [-Werror=unused-variable]
struct ieee80211_local *local = sdata->local;
^~~~~
Fix it with __maybe_unused.
Fixes: 8cbf0c2ab6df ("wifi: mac80211: refactor some key code")
Signed-off-by: Íñigo Huguet <ihuguet@redhat.com>
Link: https://lore.kernel.org/r/20221111153622.29016-1-ihuguet@redhat.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
For ACKs generated inside the I/O thread, transmit the ACK at the point of
generation. Where the ACK is generated outside of the I/O thread, it's
offloaded to the I/O thread to transmit it.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Fold __rxrpc_unuse_local() into rxrpc_unuse_local() as the latter is now
the only user of the former.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
When we've gone for >1RTT without transmitting a packet, we should reduce
the ssthresh and cut the cwnd by half (as suggested in RFC2861 sec 3.1).
However, we may receive ACK packets in a batch and the first of these may
cut the cwnd, preventing further transmission, and each subsequent one cuts
the cwnd yet further, reducing it to the floor and killing performance.
Fix this by moving the cwnd reset to after doing the transmission and
resetting the base time such that we don't cut the cwnd by half again for
at least another RTT.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Add a tracepoint to log when a cwnd reset occurs due to lack of
transmission on a call.
Add stat counters to count transmission underflows (ie. when we have tx
window space, but sendmsg doesn't manage to keep up), cwnd resets and
transmission failures.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
None of the spinlocks in rxrpc need a _bh annotation now as the RCU
callback routines no longer take spinlocks and the bulk of the packet
wrangling code is now run in the I/O thread, not softirq context.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Move the functions from the call->processor and local->processor work items
into the domain of the I/O thread.
The call event processor, now called from the I/O thread, then takes over
the job of cranking the call state machine, processing incoming packets and
transmitting DATA, ACK and ABORT packets. In a future patch,
rxrpc_send_ACK() will transmit the ACK on the spot rather than queuing it
for later transmission.
The call event processor becomes purely received-skb driven. It only
transmits things in response to events. We use "pokes" to queue a dummy
skb to make it do things like start/resume transmitting data. Timer expiry
also results in pokes.
The connection event processor, becomes similar, though crypto events, such
as dealing with CHALLENGE and RESPONSE packets is offloaded to a work item
to avoid doing crypto in the I/O thread.
The local event processor is removed and VERSION response packets are
generated directly from the packet parser. Similarly, ABORTs generated in
response to protocol errors will be transmitted immediately rather than
being pushed onto a queue for later transmission.
Changes:
========
ver #2)
- Fix a couple of introduced lock context imbalances.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Extract the peer address from an incoming packet earlier, at the beginning
of rxrpc_input_packet() and thence pass a pointer to it to various
functions that use it as part of the lookup rather than doing it on several
separate paths.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Shrink the region of rxrpc_input_packet() that is covered by the RCU read
lock so that it only covers the connection and call lookup. This means
that the bits now outside of that can call sleepable functions such as
kmalloc and sendmsg.
Also take a ref on the conn or call we're going to use before we drop the
RCU read lock.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
A received skbuff needs a ref when it gets put on a call data queue or conn
packet queue, and rxrpc_input_packet() and co. jump through a lot of hoops
to avoid double-dropping the skbuff ref so that we can avoid getting a ref
when we queue the packet.
Change this so that the skbuff ref is unconditionally dropped by the caller
of rxrpc_input_packet(). An additional ref is then taken on the packet if
it is pushed onto a queue.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Remove the RCU requirements from the peer's list of error targets so that
the error distributor can call sleeping functions.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Move DATA transmission into the call processor work item. In a future
patch, this will be called from the I/O thread rather than being itsown
work item.
This will allow DATA transmission to be driven directly by incoming ACKs,
pokes and timers as those are processed.
The Tx queue is also split: The queue of packets prepared by sendmsg is now
places in call->tx_sendmsg and the packet dispatcher decants the packets
into call->tx_buffer as space becomes available in the transmission
window. This allows sendmsg to run ahead of the available space to try and
prevent an underflow in transmission.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Copy client call parameters into rxrpc_call earlier so that that can be
used to convey them to the connection code - which can then be offloaded to
the I/O thread.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Provide a means by which an event notification can be sent to a call such
that the I/O thread can process it rather than it being done in a separate
workqueue. This will allow a lot of locking to be removed.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Don't use sk->sk_receive_queue.lock to guard socket state changes as the
socket mutex is sufficient.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
