IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
The biggest single thing in the diffstat here is a massive overhaul of
the PXA2xx driver from Andy Shevchenko (the IP is still in use on modern
Intel systems), though we also have quite a lot of core work as well:
- Better support for mixing native and GPIO chip selects also from
Andy.
- Support for devices with multiple chip selects from Sebastian
Reichel.
- Helper for polling status registers in spi-mem from Patrice Chotard.
- Support for Renesas RZ/N1 and Rockchip RV1126.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmDZ1XMACgkQJNaLcl1U
h9Cw4Qf/dD9K8Psa6oBLrJBVH9L8Bl8UN36UyrZgnZP/cydlPp3MkLpwg9K/mwPV
zqYEm/WcI5mzZ7+RxVwK3fchEBFtlKcIGe2lvfqGBCsVGW8NMtoaiSsCtJ9NoKLk
Q3cjYbERql26sl7fyEx4tCEMGHsRP8XuToyPCm4htSayY6Wh7dsCLpsDPqszeK/c
KnGQItG1hGkXJmy4A47AZqdJlRjeoNxdfnwkE0dxihDmzirE86r4x+QqTVw/OGT/
sE8dtxjuR1bC04oY7I0J3yvgFSA1VxPR+vP0b8KQcXd0pJbTooYppQHDQmltFJ7i
KThmZhDLCsQ8Q/PuWJF7NIPD+gbAoA==
=zcuM
-----END PGP SIGNATURE-----
Merge tag 'spi-v5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi updates from Mark Brown:
"The biggest single thing in the diffstat here is a massive overhaul of
the PXA2xx driver from Andy Shevchenko (the IP is still in use on
modern Intel systems), though we also have quite a lot of core work as
well:
- Better support for mixing native and GPIO chip selects also from
Andy.
- Support for devices with multiple chip selects from Sebastian
Reichel.
- Helper for polling status registers in spi-mem from Patrice
Chotard.
- Support for Renesas RZ/N1 and Rockchip RV1126"
* tag 'spi-v5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (86 commits)
spi: core: add dma_map_dev for dma device
spi: convert Xilinx Zynq UltraScale+ MPSoC GQSPI bindings to YAML
spi: Fix self assignment issue with ancillary->mode
spi: spi-sh-msiof: : use proper DMAENGINE API for termination
spi: spi-rspi: : use proper DMAENGINE API for termination
spi: spi-rockchip: add description for rv1126
spi: rockchip: Support SPI_CS_HIGH
spi: rockchip: Support cs-gpio
spi: rockchip: Wait for STB status in slave mode tx_xfer
spi: rockchip: Set rx_fifo interrupt waterline base on transfer item
spi: rockchip: add compatible string for rv1126
spi: spi-sun6i: Fix chipselect/clock bug
spi: dt-bindings: support devices with multiple chipselects
spi: add ancillary device support
spi: xilinx: convert to yaml
spi: convert Cadence SPI bindings to YAML
spi: stm32-qspi: Remove unused qspi field of struct stm32_qspi_flash
spi: add of_device_uevent_modalias support
spi: meson-spicc: fix memory leak in meson_spicc_probe
spi: meson-spicc: fix a wrong goto jump for avoiding memory leak.
...
The first fix solves an underflow in SoundWire platforms using the
max98373 amplifier, the rest of the patches are minor corrections in
machine drivers.
The fix should be queued for the 5.14 cycle, the rest should be
harmless but can be deferred for 5.15 if it's too late already.
Brent Lu (2):
ASoC: SOF: add a helper to get topology configured bclk
ASoC: Intel: sof_cs42l42: use helper function to get bclk frequency
Gongjun Song (1):
ASoC: Intel: soc-acpi: add support for SoundWire of TGL-H-RVP
Rander Wang (1):
ASoC: Intel: boards: fix xrun issue on platform with max98373
include/sound/sof.h | 1 +
sound/soc/intel/boards/sof_cs42l42.c | 8 +-
sound/soc/intel/boards/sof_sdw_max98373.c | 81 ++++++++++++-------
.../intel/common/soc-acpi-intel-tgl-match.c | 15 ++++
sound/soc/sof/sof-audio.c | 42 ++++++++--
5 files changed, 111 insertions(+), 36 deletions(-)
--
2.25.1
When starting the Halo core it is advised to also write the core reset
bit, this ensures the part starts up in the appropriate state. Omitting
this doesn't cause issues on most parts but cs40l25 requires it and
it is advised on all Halo parts.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20210626155941.12251-2-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When wm_coeff_tlv_get was updated it was accidentally switch to the _raw
version of the helper causing it to ignore the current DSP state it
should be checking. Switch the code back to the correct helper so that
users can't read the controls when they arn't available.
Fixes: 73ecf1a673d3 ("ASoC: wm_adsp: Correct cache handling of new kernel control API")
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20210626155941.12251-1-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
In commit dc98f1d we removed the zte zx sound drivers but there
was a dangling Kconfig left around for the codec so fix this.
Fixes: dc98f1d655ca ("ASoC: remove zte zx drivers")
Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Mark Brown <broonie@kernel.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20210627105955.3410015-1-pbrobinson@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
On TGL platform with max98373 codec the trigger start sequence is
fe first, then codec component and sdw link is the last. Recently
a delay was introduced in max98373 codec driver and this resulted
to the start of sdw stream transmission was delayed and the data
transmitted by fw can't be consumed by sdw controller, so xrun happened.
Adding delay in trigger function is a bad idea. This patch enable spk
pin in prepare function and disable it in hw_free to avoid xrun issue
caused by delay in trigger.
Fixes: 3a27875e91fb ("ASoC: max98373: Added 30ms turn on/off time delay")
BugLink: https://github.com/thesofproject/sof/issues/4066
Reviewed-by: Bard Liao <bard.liao@intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210625205042.65181-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The HP EliteBook 830 G8 Notebook PC using ALC285 codec which using 0x04 to
control mute LED and 0x01 to control micmute LED.
Therefore, add a quirk to make it works.
Signed-off-by: Jeremy Szu <jeremy.szu@canonical.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210625133414.26760-1-jeremy.szu@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The intent here is to return an error code if we don't find what we are
looking for in the 'list_for_each_entry()' loop.
's' is not NULL if the list is empty or if we scan the complete list.
Introduce a new 'found' variable to handle such cases.
Fixes: 60dd49298ec5 ("ALSA: firewire-lib: handle several AMDTP streams in callback handler of IRQ target")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Acked-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/9c9a53a4905984a570ba5672cbab84f2027dedc1.1624560484.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Currently IRQ_CLEAR register is marked as write-only, however using
regmap_update_bits on this register will have some side effects.
so mark IRQ_CLEAR register appropriately as readable and volatile.
Fixes: da0363f7bfd3 ("ASoC: qcom: Fix for DMA interrupt clear reg overwriting")
Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Tested-by: Srinivasa Rao Mandadapu <srivasam@codeaurora.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20210624092153.5771-1-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
One of the fixes reverted as part of the UMN fallout was actually fine,
however rather than undoing the revert the process that handled all this
stuff resulted in a patch which attempted to add extra error checks
instead. Unfortunately this new change wasn't really based on a good
understanding of the subsystem APIs and bypassed the usual patch flow
without ensuring it was reviewed by people with subsystem knowledge and
was merged as a fix rather than during the merge window.
The effect of the new fix is to upgrade what were previously warnings on
static data in the code to hard errors on that data. If this actually
happens then it would break existing systems, if it doesn't happen then
the change has no effect so this was not a safe change to apply as a fix
to the release candidates. Since the new code has not been tested and
doesn't in practice improve error handling revert it instead, and also
drop the original revert since the original fix was fine. This takes
the driver back to what it was in -rc1.
Fixes: 5e70b8e22b64e ("ASoC: rt5645: add error checking to rt5645_probe function")
Fixes: 1e0ce84215dbf ("Revert "ASoC: rt5645: fix a NULL pointer dereference")
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Phillip Potter <phil@philpotter.co.uk>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20210608160713.21040-1-broonie@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
(cherry picked from commit 916cccb5078eee57fce131c5fe18e417545083e2)
Signed-off-by: Takashi Iwai <tiwai@suse.de>
A final batch of fixes for v5.13, this is larger than I'd like due to
the fixes for a series of suspend issues that Intel turned up in their
testing this week.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmDTZ30ACgkQJNaLcl1U
h9C5dQf6AjDh6y0SfB264cv2kSCLtYsOstSeamrEv3HBjqGiWEDgzfdB5Z+5d+EJ
ScWsfsZ8eMr7WcMZJ+wEGNKxcZO2uHEaC29dpNrDeE4Ffr9hsSucPhJ8Fm+K0qDH
VqX4kDPFY+OiuOf5RipDyAgoHo4zhIeaE9Rgxd4lbNH/xpWtgalN22iyYLpiYZLP
YJk+/8L37ZcKYX3uCImMEe4yseH3AFzGz7yi/tyyWCUP7GEwtWgzv2vadxewjY5E
h12ToqsTMQIrix0ZfMbYW9KJ7ANn6PFBz10vH8XuGbUlBW33pVzqP+Wr9adXGG4N
XLs6wRpbDbdJc3aDpDjA1nRlBl5XEg==
=h2+R
-----END PGP SIGNATURE-----
Merge tag 'asoc-fix-v5.13-rc7' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-next
ASoC: Fixes for v5.13
A final batch of fixes for v5.13, this is larger than I'd like due to
the fixes for a series of suspend issues that Intel turned up in their
testing this week.
Hi,
this is v2 from my patchset that add support for the TAS2505 to the tlv320aic32x4 driver.
kind regards,
Claudius
Changes from v1:
- clarified commit message of first patch, which add the type value to the struct
- removed unnecessary code to put and get speaker volume
- removed 'Gain' from 'HP Driver Playback Volume' control
- fixed rebase issues
Claudius Heine (3):
ASoC: tlv320aic32x4: add type to device private data struct
ASoC: tlv320aic32x4: add support for TAS2505
ASoC: tlv320aic32x4: dt-bindings: add TAS2505 to compatible
.../bindings/sound/tlv320aic32x4.txt | 1 +
sound/soc/codecs/tlv320aic32x4-i2c.c | 22 ++-
sound/soc/codecs/tlv320aic32x4-spi.c | 23 ++-
sound/soc/codecs/tlv320aic32x4.c | 139 +++++++++++++++++-
sound/soc/codecs/tlv320aic32x4.h | 10 ++
5 files changed, 186 insertions(+), 9 deletions(-)
base-commit: 70585216fe7730d9fb5453d3e2804e149d0fe201
--
2.32.0
Make sure the HDA driver's display power reference is released during
shutdown/reboot.
During the shutdown/reboot sequence the pci device core calls the
pm_runtime_resume handler for all devices before calling the driver's
shutdown callback and so the HDA driver's runtime resume callback will
acquire a display power reference (on HSW/BDW). This triggers a power
reference held WARN on HSW/BDW in the i915 driver's subsequent shutdown
handler, which expects all display power references to be released by
that time.
Since the HDA controller is stopped in the shutdown handler in any case,
let's follow here the same sequence as the one during runtime suspend.
This will also reset the HDA link and drop the display power reference,
getting rid of the above WARN.
Tested on HSW.
v2:
- Fix the build for CONFIG_PM=n (Takashi)
- s/__azx_runtime_suspend/azx_shutdown_chip/
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/3618
References: https://lore.kernel.org/lkml/cea1f9a-52e0-b83-593d-52997fe1aaf6@er-systems.de
Reported-and-tested-by: Thomas Voegtle <tv@lio96.de>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://lore.kernel.org/r/20210623134601.2128663-1-imre.deak@intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Fixes scripts/checkpatch.pl warning:
WARNING: Possible unnecessary 'out of memory' message
Remove it can help us save a bit of memory.
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Link: https://lore.kernel.org/r/20210617103141.1765-1-thunder.leizhen@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This adds support for TAS2505 and TAS2521 to the tlv320aic32x4 driver.
The TAS2505 seems to be a stripped down version of the TLV320AIC32X4 so
it makes sense to handle them in the same driver.
Signed-off-by: Claudius Heine <ch@denx.de>
Link: https://lore.kernel.org/r/20210617085230.1851503-3-ch@denx.de
Signed-off-by: Mark Brown <broonie@kernel.org>
While this driver can already handle different device variants, the
variant information cannot be used in the driver code and therefor
cannot have different code paths depending on the device variant.
This change adds a `type` value into the `aic32x4_priv` structure, that
contains a device variant identifier, which was set when the driver was
bound to the device.
Signed-off-by: Claudius Heine <ch@denx.de>
Link: https://lore.kernel.org/r/20210617085230.1851503-2-ch@denx.de
Signed-off-by: Mark Brown <broonie@kernel.org>
When system enter suspend, the machine driver suspend callback
function will be called, then the cpu driver trigger callback
(SNDRV_PCM_TRIGGER_SUSPEND) be called, it would disable the
interrupt.
But the machine driver suspend and cpu dai driver suspend order
maybe changed, the cpu dai driver's suspend callback is called before
machine driver's suppend callback, then the interrupt is not cleared
successfully in trigger callback.
So need to clear interrupts in cpu dai driver's suspend callback
to avoid such issue.
Fixes: 9cb2b3796e08 ("ASoC: fsl_spdif: Add pm runtime function")
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Link: https://lore.kernel.org/r/1624365084-7934-1-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
After further investigation, I find out some mistakes for 896 about its
register. This commit fixes it.
Fixes: b431f16f1685 ("ALSA: firewire-motu: add support for MOTU 896")
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20210623075941.72562-10-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
After further investigation, I find out some mistakes for 828 about its
register. This commit fixes it.
Fixes: d13d6b284d8b ("ALSA: firewire-motu: add support for MOTU 828")
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20210623075941.72562-9-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Current implementation of driver has two similar helper functions for
source detection of sampling clock. This commit merges them as a code
refactoring.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20210623075941.72562-7-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Current implementation of driver has several similar helper functions
for packet format detection in protocol version 2.
This commit merges them as code refactoring.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20210623075941.72562-6-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Although MOTU Traveler supports AES/EBU source for sampling clock,
current implementation of driver doesn't code it.
This commit adds support for AES/EBU source in protocol version 2.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20210623075941.72562-4-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Current implementation of driver has two similar helper functions for
source detection of sampling clock. This commit merges them as a code
refactoring.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20210623075941.72562-3-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The devices in protocol version 2 has a register with flag for IEC 60958
signal detection as source of sampling clock without discrimination
between coaxial and optical interfaces. On the other hand, current
implementation of driver manage to interpret type of signal on optical
interface instead.
This commit fixes the detection of optical/coaxial interface for S/PDIF
signal.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20210623075941.72562-2-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
For configuration items with a size of 16, scarlett2_usb_get_config()
was filling *buf with little-endian data. Update it to convert to CPU
endian. This function is not currently used so affects nothing yet;
will be used by the upcoming talkback feature.
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Link: https://lore.kernel.org/r/cbc8b6eedd859dd27086ab4126d724a86dd50bcb.1624379707.git.g@b4.vu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The 18i8 and 18i20 Gen 3 support "speaker switching". Add a Speaker
Switch control which can be set to Off/Main/Alt.
When speaker switching is enabled or disabled, the interface may
change the state of the Analog Outputs 3 and 4 routing and the global
mute button, so use a flag private->speaker_switching_switched to note
that those should be checked when the next "monitor other"
notification is received.
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Link: https://lore.kernel.org/r/874193a534cd0aeb6f2e108ae761cadd2dc25ad2.1624379707.git.g@b4.vu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Enabling/disabling speaker switching will update the mux
configuration. To prepare for this, add a private->mux_updated flag
and update the scarlett2_mux_src_enum_ctl_get() callback to check it.
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Link: https://lore.kernel.org/r/5ce3bb9fe4006b550d18c783c5ff640fe0bfbfcb.1624379707.git.g@b4.vu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Save the struct snd_kcontrol pointers for the sw_hw and mux controls.
This is in preparation for speaker switching support which needs to be
able to update those controls.
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Link: https://lore.kernel.org/r/269d89181bf29dbea80ba6f8cfff84fb23b77f86.1624379707.git.g@b4.vu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Split part of scarlett2_sw_hw_enum_ctl_put() out into
scarlett2_sw_hw_change() so that the code which actually makes the
change is available in its own function. This will be used by the
speaker switching support which needs to set the SW/HW switch to HW
when speaker switching is enabled.
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Link: https://lore.kernel.org/r/f2cf91841ba067b490e7709bc4b14f4532b4ddd5.1624379707.git.g@b4.vu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The Solo and 2i2 devices don't have a mixer but they do have a "direct
monitor" switch. Add support for getting and setting the state of this
switch.
Co-developed-by: Vladimir Sadovnikov <sadko4u@gmail.com>
Signed-off-by: Vladimir Sadovnikov <sadko4u@gmail.com>
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Link: https://lore.kernel.org/r/61d23dc4feb3b046d870ad7203e66ff2bd1d278c.1624379707.git.g@b4.vu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Some inputs on Gen 3 models support software-selectable phantom power.
Add support for getting and setting the state of those switches and
the "Phantom Power Persistence" switch.
Co-developed-by: Vladimir Sadovnikov <sadko4u@gmail.com>
Signed-off-by: Vladimir Sadovnikov <sadko4u@gmail.com>
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Link: https://lore.kernel.org/r/5837ce8a8c686560fc8f40b4204dd2a10721869b.1624379707.git.g@b4.vu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Some inputs on Gen 3 models have an "air" feature which can be enabled
from the driver or (model-dependent) from the front panel. Add support
for getting and setting the state of those switches.
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Link: https://lore.kernel.org/r/44d448a4150b9c068754759c9fdd2bfe21484487.1624379707.git.g@b4.vu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Add initial support for the Focusrite Scarlett Solo and 2i2 devices:
- They have no mixer
- They don't support reporting sync status or levels
- The configuration space is laid out differently to the other models
- There is no level (line/inst) switch on input 1 of the Solo
Co-developed-by: Vladimir Sadovnikov <sadko4u@gmail.com>
Signed-off-by: Vladimir Sadovnikov <sadko4u@gmail.com>
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Link: https://lore.kernel.org/r/190b90f6f1f8f8d4dfb5f0a7761ff8ae5c40fdde.1624379707.git.g@b4.vu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Move scarlett2_usb_get() and scarlett2_usb_get_config() above the
functions relating to updating the configuration so that
scarlett2_usb_set_config() can call scarlett2_usb_get() in a
subsequent patch.
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Link: https://lore.kernel.org/r/1549f8e44548be679119f0b1462f888f4a03812d.1624379707.git.g@b4.vu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
