10 Commits

Author SHA1 Message Date
Andrew Lunn
c58e39942a net: mdio: ipq4019: Separate C22 and C45 transactions
The ipq4019 driver can perform both C22 and C45 transfers.  Create
separate functions for each and register the C45 versions using the
new driver API calls.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-01-13 21:40:54 -08:00
Baruch Siach
b6ad6261d2 net: mdio-ipq4019: add delay after clock enable
Experimentation shows that PHY detect might fail when the code attempts
MDIO bus read immediately after clock enable. Add delay to stabilize the
clock before bus access.

PHY detect failure started to show after commit 7590fc6f80ac ("net:
mdio: Demote probed message to debug print") that removed coincidental
delay between clock enable and bus access.

10ms is meant to match the time it take to send the probed message over
UART at 115200 bps. This might be a far overshoot.

Fixes: 23a890d493e3 ("net: mdio: Add the reset function for IPQ MDIO driver")
Signed-off-by: Baruch Siach <baruch.siach@siklu.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-21 13:04:53 +00:00
Cai Huoqing
9e28cfead2 net: mdio-ipq4019: Fix the error for an optional regs resource
The second resource is optional which is only provided on the chipset
IPQ5018. But the blamed commit ignores that and if the resource is
not there it just fails.

the resource is used like this,
	if (priv->eth_ldo_rdy) {
		val = readl(priv->eth_ldo_rdy);
		val |= BIT(0);
		writel(val, priv->eth_ldo_rdy);
		fsleep(IPQ_PHY_SET_DELAY_US);
	}

This patch reverts that to still allow the second resource to be optional
because other SoC have the some MDIO controller and doesn't need to
second resource.

Fixes: fa14d03e014a ("net: mdio-ipq4019: Make use of devm_platform_ioremap_resource()")
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20210928134849.2092-1-caihuoqing@baidu.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-09-28 17:28:54 -07:00
Cai Huoqing
fa14d03e01 net: mdio-ipq4019: Make use of devm_platform_ioremap_resource()
Use the devm_platform_ioremap_resource() helper instead of
calling platform_get_resource() and devm_ioremap_resource()
separately

Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-31 12:05:51 +01:00
Luo Jie
c76ee26306 MDIO: Kconfig: Specify more IPQ chipset supported
The IPQ MDIO driver currently supports the chipset IPQ40xx, IPQ807x,
IPQ60xx and IPQ50xx.

Add the compatible 'qcom,ipq5018-mdio' because of ethernet LDO dedicated
to the IPQ5018 platform.

Signed-off-by: Luo Jie <luoj@codeaurora.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-16 10:30:27 +01:00
Luo Jie
23a890d493 net: mdio: Add the reset function for IPQ MDIO driver
1. configure the MDIO clock source frequency.
2. the LDO resource is needed to configure the ethernet LDO available
for CMN_PLL.

Signed-off-by: Luo Jie <luoj@codeaurora.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-16 10:30:27 +01:00
Calvin Johnson
1bf3436650 net: mdio: Alphabetically sort header inclusion
Alphabetically sort header inclusion

Signed-off-by: Calvin Johnson <calvin.johnson@oss.nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-16 11:10:00 -07:00
Robert Marko
06fb560602 net: mdio-ipq4019: add Clause 45 support
While up-streaming the IPQ4019 driver it was thought that the controller had no Clause 45 support,
but it actually does and its activated by writing a bit to the mode register.

So lets add it as newer SoC-s use the same controller and Clause 45 compliant PHY-s.

Signed-off-by: Robert Marko <robert.marko@sartura.hr>
Cc: Luka Perkov <luka.perkov@sartura.hr>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-23 17:41:15 -07:00
Robert Marko
b840ec1efd net: mdio-ipq4019: change defines to upper case
In the commit adding the IPQ4019 MDIO driver, defines for timeout and sleep partially used lower case.
Lets change it to upper case in line with the rest of driver defines.

Signed-off-by: Robert Marko <robert.marko@sartura.hr>
Cc: Luka Perkov <luka.perkov@sartura.hr>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-23 17:41:15 -07:00
Andrew Lunn
a9770eac51 net: mdio: Move MDIO drivers into a new subdirectory
Move all the MDIO drivers and multiplexers into drivers/net/mdio.  The
mdio core is however left in the phy directory, due to mutual
dependencies between the MDIO core and the PHY core.

Take this opportunity to sort the Kconfig based on the menuconfig
strings, and move the multiplexers to the end with a separating
comment.

v2:
Fix typo in commit message

Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-27 06:55:50 -07:00