Commit Graph

43969 Commits

Author SHA1 Message Date
d67703fced Merge tag 'mac80211-next-for-davem-2016-02-26' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next
Johannes Berg says:

====================
Here's another round of updates for -next:
 * big A-MSDU RX performance improvement (avoid linearize of paged RX)
 * rfkill changes: cleanups, documentation, platform properties
 * basic PBSS support in cfg80211
 * MU-MIMO action frame processing support
 * BlockAck reordering & duplicate detection offload support
 * various cleanups & little fixes
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-01 17:03:27 -05:00
3db66fdc5f ARM: dts: ls1021a: add 1588 timer node
Add the 1588 timer node for ls1021a platform to
support gianfar ptp driver.

Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-25 16:22:02 -05:00
d54bbaf45a ARM: tegra: use build-in device properties with rfkill_gpio
Pass the rfkill name and type to the device with properties
instead of driver specific platform data.

Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
CC: Alexandre Courbot <gnurou@gmail.com>
CC: Thierry Reding <thierry.reding@gmail.com>
CC: Stephen Warren <swarren@wwwdotorg.org>
Acked-by: Thierry Reding <treding@nvidia.com>
Tested-by: Marc Dietrich <marvin24@gmx.de>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-02-24 09:13:08 +01:00
23300f6575 Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Will Deacon:
 "Here are some more arm64 fixes for 4.5.  This has mostly come from
  Yang Shi, who saw some issues under -rt that also affect mainline.
  The rest of it is pretty small, but still worth having.

  We've got an old issue outstanding with valid_user_regs which will
  likely wait until 4.6 (since it would really benefit from some time in
  -next) and another issue with kasan and idle which should be fixed
  next week.

  Apart from that, pretty quiet here (and still no sign of the THP issue
  reported on s390...)

  Summary:

   - Allow EFI stub to use strnlen(), which is required by recent libfdt

   - Avoid smp_processor_id() in preempt context during unwinding

   - Avoid false Kasan warnings during unwinding

   - Ensure early devices are picked up by the IOMMU DMA ops

   - Avoid rebuilding the kernel for the 'install' target

   - Run fixup handlers for alignment faults on userspace access"

* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
  arm64: mm: allow the kernel to handle alignment faults on user accesses
  arm64: kbuild: make "make install" not depend on vmlinux
  arm64: dma-mapping: fix handling of devices registered before arch_initcall
  arm64/efi: Make strnlen() available to the EFI namespace
  arm/arm64: crypto: assure that ECB modes don't require an IV
  arm64: make irq_stack_ptr more robust
  arm64: debug: re-enable irqs before sending breakpoint SIGTRAP
  arm64: disable kasan when accessing frame->fp in unwind_frame
2016-02-19 08:40:05 -08:00
bee038a4bd arm/arm64: crypto: assure that ECB modes don't require an IV
ECB modes don't use an initialization vector. The kernel
/proc/crypto interface doesn't reflect this properly.

Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Jeremy Linton <jeremy.linton@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
2016-02-15 15:48:29 +00:00
be3f4e0fb3 Merge branch 'fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-arm
Pull ARM fixes from Russell King:
 "A couple of ARM fixes from Linus for the ICST clock generator code"

[ "Linus" here is Linus Walleij.  Name-stealer.

       Linus "there can be only one" Torvalds ]

* 'fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-arm:
  ARM: 8519/1: ICST: try other dividends than 1
  ARM: 8517/1: ICST: avoid arithmetic overflow in icst_hz()
2016-02-14 10:46:47 -08:00
14379cdc76 Merge tag 'fbdev-fixes-4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux
Pull fbdev fixes from Tomi Valkeinen:
 - fix omap2plus_defconfig to enable omapfb as it was in v4.4
 - ocfb: fix timings for margins
 - s6e8ax0, da8xx-fb: fix compile warnings
 - mmp: fix build failure caused by bad printk parameters
 - imxfb: fix clock issue which kept the display off

* tag 'fbdev-fixes-4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux:
  video: fbdev: imxfb: Provide a reset mechanism
  fbdev: mmp: print IRQ resource using %pR format string
  fbdev: da8xx-fb: remove incorrect type cast
  fbdev: s6e8ax0: avoid unused function warnings
  ocfb: fix tgdel and tvdel timing parameters
  ARM: omap2plus_defconfig: update display configs
2016-02-12 09:39:34 -08:00
e972c37459 ARM: 8519/1: ICST: try other dividends than 1
Since the dawn of time the ICST code has only supported divide
by one or hang in an eternal loop. Luckily we were always dividing
by one because the reference frequency for the systems using
the ICSTs is 24MHz and the [min,max] values for the PLL input
if [10,320] MHz for ICST307 and [6,200] for ICST525, so the loop
will always terminate immediately without assigning any divisor
for the reference frequency.

But for the code to make sense, let's insert the missing i++

Reported-by: David Binderman <dcb314@hotmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2016-02-11 14:12:33 +00:00
5070fb14a0 ARM: 8517/1: ICST: avoid arithmetic overflow in icst_hz()
When trying to set the ICST 307 clock to 25174000 Hz I ran into
this arithmetic error: the icst_hz_to_vco() correctly figure out
DIVIDE=2, RDW=100 and VDW=99 yielding a frequency of
25174000 Hz out of the VCO. (I replicated the icst_hz() function
in a spreadsheet to verify this.)

However, when I called icst_hz() on these VCO settings it would
instead return 4122709 Hz. This causes an error in the common
clock driver for ICST as the common clock framework will call
.round_rate() on the clock which will utilize icst_hz_to_vco()
followed by icst_hz() suggesting the erroneous frequency, and
then the clock gets set to this.

The error did not manifest in the old clock framework since
this high frequency was only used by the CLCD, which calls
clk_set_rate() without first calling clk_round_rate() and since
the old clock framework would not call clk_round_rate() before
setting the frequency, the correct values propagated into
the VCO.

After some experimenting I figured out that it was due to a simple
arithmetic overflow: the divisor for 24Mhz reference frequency
as reference becomes 24000000*2*(99+8)=0x132212400 and the "1"
in bit 32 overflows and is lost.

But introducing an explicit 64-by-32 bit do_div() and casting
the divisor into (u64) we get the right frequency back, and the
right frequency gets set.

Tested on the ARM Versatile.

Cc: stable@vger.kernel.org
Cc: linux-clk@vger.kernel.org
Cc: Pawel Moll <pawel.moll@arm.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2016-02-08 16:40:36 +00:00
381a65c21a ARM: multi_v7_defconfig: enable DW_WATCHDOG
The watchdog timer on the SoCFPGA platform is the Synopsys Designware watchdog.
Enable CONFIG_DW_WATCHDOG for the driver to get built.

Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com>
Tested-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
2016-02-04 13:25:33 -08:00
418d551656 ARM: nomadik: fix up SD/MMC DT settings
The DTSI file for the Nomadik does not properly specify how the
PL180 levelshifter is connected: the Nomadik actually needs all
the five st,sig-dir-* flags set to properly control all lines out.

Further this board supports full power cycling of the card, and
since this variant has no hardware clock gating, it needs a
ridiculously low frequency setting to keep up with the ever
overflowing FIFO.

The pin configuration set-up is a bit of a mystery, because of
course these pins are a mix of inputs and outputs. However the
reference implementation sets all pins to "output" with
unspecified initial value, so let's do that here as well.

Cc: stable@vger.kernel.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
2016-02-04 13:24:08 -08:00
6c388927a7 Merge tag 'mvebu-fixes-4.5-1' of git://git.infradead.org/linux-mvebu into fixes
mvebu fixes for 4.5 (part 1)

- Fix dts on buffalo linksations machines (gpios and leds)
- Fix dts partition node according to new binding introduced in v4.5

* tag 'mvebu-fixes-4.5-1' of git://git.infradead.org/linux-mvebu:
  ARM: dts: orion5x: gpio pin fixes for linkstation lswtgl
  ARM: dts: kirkwood: gpio-leds fixes for linkstation ls-wvl/vl
  ARM: dts: kirkwood: gpio-leds fixes for linkstation ls-wxl/wsxl
  ARM: dts: kirkwood: gpio pin fixes for linkstation ls-wvl/vl
  ARM: dts: kirkwood: gpio pin fixes for linkstation ls-wxl/wsxl
  ARM: mvebu: ix4-300d: Add compatible property to "partitions" node
  ARM: mvebu: kirkwood: Add compatible property to "partitions" node

Signed-off-by: Olof Johansson <olof@lixom.net>
2016-02-01 12:24:31 -08:00
7f7420f07e Merge tag 'omap-for-v4.5/fixes-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes
Fixes for omaps with the most intrusive stuff being read-only data
assembly fixes, the other things are mostly board related:

- A series of omap assembly code fixes to fix issues with rodata with
  ARM_KERNMEM_PERMS enabled. We had several places writing to rodata,
  which is bad. The fix in most cases is to load the value from data
  section using a pointer. Let's also enable ARM_KERNMEM_PERMS so
  DEBUG_RODATA gets selected by default. And while testing things,
  I also added few more loadable driver modules to the defconfig that
  I seem to need quite often.

- Fix a long standing omap5 RTC mystery and enable RTC where we need
  to ensure the SoC msecure pin is high so we can write to the RTC
  registers.

- Fix irq types for am437x

- A series of minor dts fixes for sbc-am57x and cl-som-am57x

- Fixes for torpedo dts to make WLAN behave and to remove a duplicate
  i2c rate entry

This series also includes few minor changes that are not stricly
fixes, but would be good to get in during the early -rc cycle:

- Remove legacy mailbox platform data that is no longer needed

- Add the pdata-quirks needed for the new pwm-omap-dmtimer so
  people can use it

- Enable ti,mbox-send-noirq that's needed by wkup_m3 driver

- Enable SPLIT and DWARF4 in omap2plus_defconfig as it makes the
  initramfs quite a bit smaller

* tag 'omap-for-v4.5/fixes-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: (23 commits)
  ARM: dts: am57xx: sbc-am57x: correct Eth PHY settings
  ARM: dts: am57xx: cl-som-am57x: fix CPSW EMAC pinmux
  ARM: dts: am57xx: sbc-am57x: fix UART3 pinmux
  ARM: dts: am57xx: cl-som-am57x: update SPI Flash frequency
  ARM: dts: am57xx: cl-som-am57x: set HOST mode for USB2
  ARM: dts: am57xx: sbc-am57x: fix SB-SOM EEPROM I2C address
  ARM: dts: LogicPD Torpedo: Revert Duplicative Entries
  ARM: dts: am437x: pixcir_tangoc: use correct flags for irq types
  ARM: dts: am4372: fix irq type for arm twd and global timer
  ARM: dts: Fix wl12xx missing clocks that cause hangs
  ARM: OMAP: Add PWM dmtimer platform data quirks
  ARM: omap2plus_defconfig: Enable ARM_KERNMEM_PERMS and few loadable modules
  ARM: OMAP2+: Fix ppa_zero_params and ppa_por_params for rodata
  ARM: OMAP2+: Fix l2_inv_api_params for rodata
  ARM: OMAP2+: Fix save_secure_ram_context for rodata
  ARM: OMAP2+: Fix l2dis_3630 for rodata
  ARM: OMAP2+: Fix wait_dll_lock_timed for rodata
  ARM: OMAP2+: Remove legacy mailbox device instantiation
  ARM: dts: AM4372: Add ti,mbox-send-noirq to wkup_m3 mailbox
  ARM: dts: AM33xx: Add ti,mbox-send-noirq to wkup_m3 mailbox
  ...

Signed-off-by: Olof Johansson <olof@lixom.net>
2016-02-01 12:22:52 -08:00
b83132f762 Merge tag 'at91-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nferre/linux-at91 into fixes
First fixes for 4.5. Only DT changes:
- sama5d4: error in DBGU index
- addition of phy properties in several boards
- at91sam9n12ek fix a panel compatible string

* tag 'at91-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nferre/linux-at91:
  ARM: dts: at91: sama5d4 xplained: fix phy0 IRQ type
  ARM: dts: at91: sama5d4 xplained: properly mux phy interrupt
  ARM: dts: at91: sama5d4ek: add phy address and IRQ for macb0
  ARM: dts: at91: sama5d2 xplained: add phy address and IRQ for macb0
  ARM: dts: at91: at91sam9n12ek: fix panel compatible string
  ARM: dts: at91: sama5d4: fix instance id of DBGU

Signed-off-by: Olof Johansson <olof@lixom.net>
2016-02-01 12:21:15 -08:00
c65cd255e4 ARM: realview: use "depends on" instead of "if" after prompt
This platform recently moved to multi-platform, so missed the global
fixup by commit e324654294 ("ARM: use "depends on" for SoC configs
instead of "if" after prompt").  Fix it now.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
2016-02-01 12:19:10 -08:00
990591ee39 ARM: tango: use "depends on" instead of "if" after prompt
This platform was recently added, so missed the global fixup by
commit e324654294 ("ARM: use "depends on" for SoC configs instead
of "if" after prompt").  Fix it now.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Marc Gonzalez <marc_gonzalez@sigmadesigns.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
2016-02-01 12:18:49 -08:00
c38ac80eb4 ARM: tango: use const and __initconst for smp_operations
This newly added code missed the global fixup by commit 75305275a7
("ARM: use const and __initconst for smp_operations").  So fix it now.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Marc Gonzalez <marc_gonzalez@sigmadesigns.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
2016-02-01 12:18:23 -08:00
567fdd9d91 ARM: realview: use const and __initconst for smp_operations
This newly added code missed the global fixup by commit 75305275a7
("ARM: use const and __initconst for smp_operations").  So fix it now.

Also, add missing "static" qualifier.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
2016-02-01 12:17:30 -08:00
c84f6b8bce ARM: omap2plus_defconfig: update display configs
omapfb and omapdrm were recently made independent of each other, and
this required Kconfig option changes. This patch changes the
omap2plus_defconfig to enable display similarly as before: omapfb and
panel & encoder drivers as modules.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
2016-01-29 12:59:37 +02:00
03590cb56d ARM: wire up copy_file_range() syscall
Add the copy_file_range() syscall to ARM.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2016-01-27 18:14:46 +00:00
ab342c77fa ARM: dts: am57xx: sbc-am57x: correct Eth PHY settings
Update Eth PHY settings to make it possible to run both phys at 1Gbps.

Signed-off-by: Dmitry Lifshitz <lifshitz@compulab.co.il>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-01-27 09:19:31 -08:00
2fe8bab2b0 ARM: dts: am57xx: cl-som-am57x: fix CPSW EMAC pinmux
Fix CPSW EMAC pinmux

Signed-off-by: Dmitry Lifshitz <lifshitz@compulab.co.il>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-01-27 09:19:31 -08:00
5ddfc9fc9b ARM: dts: am57xx: sbc-am57x: fix UART3 pinmux
Fix UART3 pinmux.

Signed-off-by: Dmitry Lifshitz <lifshitz@compulab.co.il>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-01-27 09:19:31 -08:00
e46c408fc7 ARM: dts: am57xx: cl-som-am57x: update SPI Flash frequency
On-board SPI flash cat act at 48Mhz SPI bus frequency.
Update the DT frequency property.

Signed-off-by: Dmitry Lifshitz <lifshitz@compulab.co.il>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-01-27 09:19:30 -08:00
c71ff38e32 ARM: dts: am57xx: cl-som-am57x: set HOST mode for USB2
Setup USB2 to act in "HOST" mode by default.

Signed-off-by: Dmitry Lifshitz <lifshitz@compulab.co.il>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-01-27 09:19:30 -08:00
bd73da8c3b ARM: dts: am57xx: sbc-am57x: fix SB-SOM EEPROM I2C address
Fix SB-SOM EEPROM I2C address

Signed-off-by: Dmitry Lifshitz <lifshitz@compulab.co.il>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-01-27 09:19:30 -08:00
2dfdc75442 ARM: dts: LogicPD Torpedo: Revert Duplicative Entries
Revert commit 7cd6ca770d ("ARM: dts: Change I2C2 and I2C3 to 400KHz
for LogicPD Torpedo DM3730 devkit")  It was already done and it is
just a duplicate.

Signed-off-by: Adam Ford <aford173@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-01-27 09:15:53 -08:00
95e7d03e08 ARM: dts: am437x: pixcir_tangoc: use correct flags for irq types
Now IRQs for Pixcir Tangoc touchscreen are defined using
IRQ_TYPE_NONE in am437x-gp-evm.dts and am43x-epos-evm.dts wich
do not correspond HW.

Hence, update am437x-gp-evm.dts and am43x-epos-evm.dts files
and use correct flag IRQ_TYPE_EDGE_FALLING for irq types.

While here, remove duplicated irq declaration for pixcir_ts@5c node
in am437x-gp-evm.dts.

Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-01-27 08:56:24 -08:00
84fb225ad2 ARM: dts: am4372: fix irq type for arm twd and global timer
As per ARM documentation
PPI(0) ID27 - global timer interrupt is rising-edge sensitive.
PPI(2) ID29 - twd interrupt is rising-edge sensitive.

and the same is proved by GIC distributor register value
GIC_DIST_CONFIG(0xC04) = 0x7DC00000.

Hence, set IRQ triggering type to IRQ_TYPE_EDGE_RISING
for ARM TWD and Global timers.

Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-01-27 08:47:13 -08:00
e873cc022c ARM: dts: at91: sama5d4 xplained: fix phy0 IRQ type
For phy0 KSZ8081, the type of GPIO IRQ should be "level low" instead of
"edge falling".

Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Fixes: 38153a0178 ("ARM: at91/dt: sama5d4: add dts for sama5d4 xplained board")
Cc: <stable@vger.kernel.org> # 4.1+
2016-01-27 11:14:25 +01:00
f505dba762 ARM: dts: at91: sama5d4 xplained: properly mux phy interrupt
No interrupt were received from the phy because PIOE 1 may not be properly
muxed. It prevented proper link detection, especially since commit
321beec504 ("net: phy: Use interrupts when available in NOLINK state")
disables polling.

Cc: <stable@vger.kernel.org> # 4.4
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2016-01-27 11:14:24 +01:00
aae6b18f5c ARM: dts: at91: sama5d4ek: add phy address and IRQ for macb0
On SAMA5D4EK board, the Ethernet doesn't work after resuming from the suspend
state.

Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com>
[nicolas.ferre@atmel.com: adapt to newer kernel]
Fixes: 38153a0178 ("ARM: at91/dt: sama5d4: add dts for sama5d4 xplained board")
Cc: <stable@vger.kernel.org> # 4.1+
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2016-01-27 11:14:23 +01:00
6c482fd15d ARM: dts: at91: sama5d2 xplained: add phy address and IRQ for macb0
After 57a38effa5 (net: phy: micrel: disable broadcast for KSZ8081/KSZ8091)
the macb0 interface has difficulties to come back from power saving mode if
address not explicitly set up.
As the micrel phy on the board is actually configured to show up at address 1
we use this explicitly.
Adding the phy node and its real address fixes the issue.

The phy IRQ and associated pinmux node is also added.

Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Cc: stable@vger.kernel.org # 4.4+ // manual merge needed
2016-01-27 11:14:22 +01:00
1a469ae2ce ARM: dts: at91: at91sam9n12ek: fix panel compatible string
Properly use qiaodian as the vendor prefix for the panel.

Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2016-01-27 11:13:11 +01:00
929e883f2b ARM: dts: at91: sama5d4: fix instance id of DBGU
Change instance id of DBGU to 45.

Signed-off-by: Mohamed Jamsheeth Hajanajubudeen <mohamedjamsheeth.hajanajubudeen@atmel.com>
Fixes: 7c661394c5 ("ARM: at91: dt: add device tree file for SAMA5D4 SoC")
Cc: stable@vger.kernel.org   # 3.18+
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2016-01-27 11:11:51 +01:00
7f66cd3f54 ARM: 8500/1: fix atags_to_fdt with stack-protector-strong
Building with CONFIG_CC_STACKPROTECTOR_STRONG triggers protection code
generation under CONFIG_ARM_ATAG_DTB_COMPAT but this is too early for
being able to use any of the stack_chk code. Explicitly disable it for
only the atags_to_fdt bits.

Suggested-by: zhxihu <zhxihu@marvell.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2016-01-26 23:49:26 +00:00
0ea24daae0 ARM: dts: Fix wl12xx missing clocks that cause hangs
The tcxo-clock-frequency binding is listed as optional,
but without it the wl12xx used on the torpedo + wireless
may hang.  Scanning also appears broken without this patch.

Signed-off-by: Adam Ford <aford173@gmail.com>
Fixes: 687c276761 ("ARM: dts: Add minimal support for LogicPD
Torpedo DM3730 devkit")
Cc: stable@vger.kernel.org # v4.2+
Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-01-25 10:52:35 -08:00
7e3b120770 Merge branch 'enable-devices' into omap-for-v4.5/fixes 2016-01-25 10:46:21 -08:00
20437f79f6 ARM: OMAP: Add PWM dmtimer platform data quirks
In order to set the currently platform dependent dmtimer
functions pointers as platform data for the pwm-omap-dmtimer
platform driver, add it to plat-omap auxdata_lookup table.

Suggested-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-01-25 09:51:28 -08:00
ff61ee84e7 ARM: dts: orion5x: gpio pin fixes for linkstation lswtgl
Here're a few gpio pin related fixes:
  - remove pinctrl-0 definition from pinctrl, since those pins are used
    in other places such as gpio-fan and regulators.
  - keep initial state of power led
  - fix for alarm pin of gpio-fan.

Fixes: dc57844a73 ("ARM: dts: orion5x: add buffalo linkstation ls-wtgl")
Signed-off-by: Roger Shimizu <rogershimizu@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
2016-01-25 16:22:59 +01:00
0418138e2f ARM: dts: kirkwood: gpio-leds fixes for linkstation ls-wvl/vl
The GPIOs controlling the LEDs, listed below, are active high, not low:
  - gpio-leds: "lswvl:red:alarm" pin
  - gpio-leds: "lswvl:red:func" pin
  - gpio-leds: "lswvl:amber:info" pin
  - gpio-leds: "lswvl:blue:func" pin
  - gpio-leds: "lswvl:red:hdderr{0,1}" pin

Fixes: c43379e150 ("ARM: dts: add buffalo linkstation ls-wvl/vl")
Signed-off-by: Roger Shimizu <rogershimizu@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
2016-01-25 15:05:11 +01:00
e98bd707e3 ARM: dts: kirkwood: gpio-leds fixes for linkstation ls-wxl/wsxl
The GPIOs controlling the LEDs, listed below, are active high, not low:
  - gpio-leds: "lswxl:blue:power" pin
  - gpio-leds: "lswxl:red:func" pin
  - gpio-leds: "lswxl:red:hdderr{0,1}" pin

Fixes: e54e4b1b62 ("ARM: dts: add buffalo linkstation ls-wxl/wsxl")
Signed-off-by: Roger Shimizu <rogershimizu@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
2016-01-25 14:49:26 +01:00
6f86e9adc5 ARM: dts: kirkwood: gpio pin fixes for linkstation ls-wvl/vl
For kirkwood, gpio pins starts from 32 are in the 2nd bank, so it should be
converted to "gpio1 <pin minus 32>" in dts file.
e.g. gpio 40 should be "gpio1 8"

The pin/bank issue was found when discussing Debian Bug #810894
  [https://bugs.debian.org/810894#47]

Fixes: c43379e150 ("ARM: dts: add buffalo linkstation ls-wvl/vl")
Reported-by: Arnaud Patard (Rtp) <arnaud.patard@rtp-net.org>
Signed-off-by: Roger Shimizu <rogershimizu@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
2016-01-25 14:49:11 +01:00
144e08abe8 ARM: dts: kirkwood: gpio pin fixes for linkstation ls-wxl/wsxl
For kirkwood, gpio pins starts from 32 are in the 2nd bank, so it should be
converted to "gpio1 <pin minus 32>" in dts file.
e.g. gpio 40 should be "gpio1 8"

Besides, a few other pin fixes for ls-wxl/wsxl, to match with mpp pin
definition:
  - gpio-leds: "lswxl:blue:power" pin
  - gpio-leds: "lswxl:red:func" pin
  - gpio-leds: "lswxl:red:hdderr0" pin
  - gpio-leds: "lswxl:red:hdderr1" pin
  - gpio-fan:  low/high/alarm pin

The pin/bank issue was found when discussing Debian Bug #810894
  [https://bugs.debian.org/810894#47]

Fixes: e54e4b1b62 ("ARM: dts: add buffalo linkstation ls-wxl/wsxl")
Reported-by: Arnaud Patard (Rtp) <arnaud.patard@rtp-net.org>
Signed-off-by: Roger Shimizu <rogershimizu@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
2016-01-25 14:48:57 +01:00
293de94cd6 ARM: mvebu: ix4-300d: Add compatible property to "partitions" node
As of commit e488ca9f8d ("doc: dt: mtd: partitions: add compatible
property to "partitions" node"), the "partitions" subnode of an SPI
FLASH device node must have a compatible property. The partitions are no
longer detected if it is not present.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Brian Norris <computersforpeace@gmail.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
2016-01-25 13:16:04 +01:00
84d92dd3b6 ARM: mvebu: kirkwood: Add compatible property to "partitions" node
As of commit e488ca9f8d ("doc: dt: mtd: partitions: add compatible
property to "partitions" node"), the "partitions" subnode of an SPI
FLASH device node must have a compatible property. The partitions are no
longer detected if it is not present.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
2016-01-25 13:16:04 +01:00
20c759ca98 Merge branch 'akpm' (patches from Andrew)
Merge small final update from Andrew Morton:

 - DAX feature work: add fsync/msync support

 - kfree cleanup, MAINTAINERS update

* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
  MAINTAINERS: return arch/sh to maintained state, with new maintainers
  tree wide: use kvfree() than conditional kfree()/vfree()
  dax: never rely on bh.b_dev being set by get_block()
  xfs: call dax_pfn_mkwrite() for DAX fsync/msync
  ext4: call dax_pfn_mkwrite() for DAX fsync/msync
  ext2: call dax_pfn_mkwrite() for DAX fsync/msync
  dax: add support for fsync/sync
  mm: add find_get_entries_tag()
  dax: support dirty DAX entries in radix tree
  pmem: add wb_cache_pmem() to the PMEM API
  dax: fix conversion of holes to PMDs
  dax: fix NULL pointer dereference in __dax_dbg()
2016-01-23 11:13:56 -08:00
79d245327f Merge tag 'armsoc-tegra' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC support for Tegra platforms from Olof Johansson:
 "Here's a single-SoC topic branch that we've staged separately.  Mainly
  because it was hard to sort the branch contents in a way that fit our
  existing branches due to some refactorings.

  The code has been in -next for quite a while, but we staged it in
  arm-soc a bit late, which is why we've kept it separate from the other
  updates and are sending it separately here"

* tag 'armsoc-tegra' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  arm64: tegra: Add NVIDIA Jetson TX1 Developer Kit support
  arm64: tegra: Add NVIDIA P2597 I/O board support
  arm64: tegra: Add NVIDIA Jetson TX1 support
  arm64: tegra: Add NVIDIA P2571 board support
  arm64: tegra: Add NVIDIA P2371 board support
  arm64: tegra: Add NVIDIA P2595 I/O board support
  arm64: tegra: Add NVIDIA P2530 main board support
  arm64: tegra: Add Tegra210 support
  arm64: tegra: Add NVIDIA Tegra132 Norrin support
  arm64: tegra: Add Tegra132 support
  ARM: tegra: select USB_ULPI from EHCI rather than platform
  ARM: tegra: Ensure entire dcache is flushed on entering LP0/1
  amba: Hide TEGRA_AHB symbol
  soc/tegra: Add Tegra210 support
  soc/tegra: Provide per-SoC Kconfig symbols
2016-01-22 17:30:52 -08:00
1b8ee1ec41 Merge tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC fixes from Olof Johansson:
 "A few fixes for fallout that we didn't catch in time in -next, or
  smaller warning fixes that have been discovered since"

* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  soc: qcom/spm: shut up uninitialized variable warning
  ARM: realview: fix device tree build
  ARM: debug-ll: fix BCM63xx entry for multiplatform
  ARM: dts: armadillo800eva Correct extal1 frequency to 24 MHz
2016-01-22 17:26:00 -08:00
1d5cfdb076 tree wide: use kvfree() than conditional kfree()/vfree()
There are many locations that do

  if (memory_was_allocated_by_vmalloc)
    vfree(ptr);
  else
    kfree(ptr);

but kvfree() can handle both kmalloc()ed memory and vmalloc()ed memory
using is_vmalloc_addr().  Unless callers have special reasons, we can
replace this branch with kvfree().  Please check and reply if you found
problems.

Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Jan Kara <jack@suse.com>
Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Acked-by: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Acked-by: David Rientjes <rientjes@google.com>
Cc: "Luck, Tony" <tony.luck@intel.com>
Cc: Oleg Drokin <oleg.drokin@intel.com>
Cc: Boris Petkov <bp@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-01-22 17:02:18 -08:00