IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
The reason codes are handled in two ways nowadays (quoting Mat Martineau):
1. Sending in the MPTCP option on RST packets when there is no subflow
context available (these use subflow_add_reset_reason() and directly call
a TCP-level send_reset function)
2. The "normal" way via subflow->reset_reason. This will propagate to both
the outgoing reset packet and to a local path manager process via netlink
in mptcp_event_sub_closed()
RFC 8684 defines the skb reset reason behaviour which is not required
even though in some places:
A host sends a TCP RST in order to close a subflow or reject
an attempt to open a subflow (MP_JOIN). In order to let the
receiving host know why a subflow is being closed or rejected,
the TCP RST packet MAY include the MP_TCPRST option (Figure 15).
The host MAY use this information to decide, for example, whether
it tries to re-establish the subflow immediately, later, or never.
Since the commit dc87efdb1a5cd ("mptcp: add mptcp reset option support")
introduced this feature about three years ago, we can fully use it.
There remains some places where we could insert reason into skb as
we can see in this patch.
Many thanks to Mat and Paolo for help:)
Signed-off-by: Jason Xing <kernelxing@tencent.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Michael Chan says:
====================
bnxt_en: Bug fixes
The first 2 patches fix 2 potential issues in the aux bus initialization
and error recovery paths. The 3rd patch fixes a potential PTP TX
timestamp issue during error recovery.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
It is possible that during error recovery and firmware reset,
there is a pending TX PTP packet waiting for the timestamp.
We need to reset this condition so that after recovery, the
tx_avail count for PTP is reset back to the initial value.
Otherwise, we may not accept any PTP TX timestamps after
recovery.
Fixes: 118612d519d8 ("bnxt_en: Add PTP clock APIs, ioctls, and ethtool methods")
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Since runtime MSIXs vector allocation/free has been removed,
the L2 driver needs to repopulate the MSIX entries for the
ulp client as the irq table may change during the recovery
process.
Fixes: 303432211324 ("bnxt_en: Remove runtime interrupt vector allocation")
Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com>
Signed-off-by: Vikas Gupta <vikas.gupta@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If ulp = kzalloc() fails, the allocated edev will leak because it is
not properly assigned and the cleanup path will not be able to free it.
Fix it by assigning it properly immediately after allocation.
Fixes: 303432211324 ("bnxt_en: Remove runtime interrupt vector allocation")
Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com>
Signed-off-by: Vikas Gupta <vikas.gupta@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add a "scope" parameter to ip_route_output() so that callers don't have
to override the tos parameter with the RTO_ONLINK flag if they want a
local scope.
This will allow converting flowi4_tos to dscp_t in the future, thus
allowing static analysers to flag invalid interactions between
"tos" (the DSCP bits) and ECN.
Only three users ask for local scope (bonding, arp and atm). The others
continue to use RT_SCOPE_UNIVERSE. While there, add a comment to warn
users about the limitations of ip_route_output().
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Acked-by: Leon Romanovsky <leonro@nvidia.com> # infiniband
Signed-off-by: David S. Miller <davem@davemloft.net>
In case of stacked devices, to help propagate the down
link state from the parent/root device (to this leaf device),
handle NETDEV_DOWN event like it is done now for NETDEV_UP.
In the below example, ens5 is the host interface which is the
parent of the ipvlan interface eth0 in the container.
Host:
[root@gkn-podman-x64 ~]# ip link set ens5 down
[root@gkn-podman-x64 ~]# ip -d link show dev ens5
3: ens5: <BROADCAST,MULTICAST> mtu 9000 qdisc mq state DOWN
...
[root@gkn-podman-x64 ~]#
Container:
[root@testnode-ol8 /]# ip -d link show dev eth0
2: eth0@if3: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 9000 state UNKNOWN
...
ipvlan mode l2 bridge
...
[root@testnode-ol8 /]#
eth0's state continues to show up as UP even though ens5 is now DOWN.
For macvlan the handling of NETDEV_DOWN event was added in
commit 80fd2d6ca546 ("macvlan: Change status when lower device goes down").
Reported-by: Gia-Khanh Nguyen <gia-khanh.nguyen@oracle.com>
Signed-off-by: Venkat Venkatsubra <venkat.x.venkatsubra@oracle.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Although the code is correct, the following line
copy_from_sockptr(&req_u.req, optval, len));
triggers this warning :
memcpy: detected field-spanning write (size 28) of single field "dst" at include/linux/sockptr.h:49 (size 16)
Refactor the code to be more explicit.
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Willem de Bruijn <willemdebruijn.kernel@gmail.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add Acer Predator PH18-71 to acer_quirks with predator_v4
to support mode button and fan speed sensor.
Signed-off-by: Bernhard Rosenkränzer <bero@baylibre.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20240329152800.29393-1-bero@baylibre.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
In a future patch HAS_IOPORT=n will disable inb()/outb() and friends at
compile time. We thus need to add HAS_IOPORT as dependency for
those drivers requiring them. For the DEFXX driver the use of I/O
ports is optional and we only need to fence specific code paths. It also
turns out that with HAS_IOPORT handled explicitly HAMRADIO does not need
the !S390 dependency and successfully builds the bpqether driver.
Acked-by: Marc Kleine-Budde <mkl@pengutronix.de>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: Maciej W. Rozycki <macro@orcam.me.uk>
Co-developed-by: Arnd Bergmann <arnd@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@kernel.org>
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Since [1], dma_alloc_coherent() does not accept requests for GFP_COMP
anymore, even on archs that may be able to fulfill this. Functionality that
relied on the receive buffer being a compound page broke at that point:
The SMC-D protocol, that utilizes the ism device driver, passes receive
buffers to the splice processor in a struct splice_pipe_desc with a
single entry list of struct pages. As the buffer is no longer a compound
page, the splice processor now rejects requests to handle more than a
page worth of data.
Replace dma_alloc_coherent() and allocate a buffer with folio_alloc and
create a DMA map for it with dma_map_page(). Since only receive buffers
on ISM devices use DMA, qualify the mapping as FROM_DEVICE.
Since ISM devices are available on arch s390, only and on that arch all
DMA is coherent, there is no need to introduce and export some kind of
dma_sync_to_cpu() method to be called by the SMC-D protocol layer.
Analogously, replace dma_free_coherent by a two step dma_unmap_page,
then folio_put to free the receive buffer.
[1] https://lore.kernel.org/all/20221113163535.884299-1-hch@lst.de/
Fixes: c08004eede4b ("s390/ism: don't pass bogus GFP_ flags to dma_alloc_coherent")
Signed-off-by: Gerd Bayer <gbayer@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Matthieu Baerts says:
====================
selftests: mptcp: cleanups and 'ip mptcp' support
Here are some patches from Geliang, doing different cleanups, and
supporting 'ip mptcp' in more MPTCP selftests.
Patch 1 checks that TC is available in selftests requiring it.
Patch 2 adds 'ms' units in TC commands, to avoid confusions.
Patches 3-9 are some prerequisites for patch 10: some export code from
mptcp_join.sh to mptcp_lib.sh, to be re-used in pm_netlink.sh,
mptcp_sockopt.sh and simult_flows.sh ; and others add helpers to
pm_netlink.sh to easily support both 'ip mptcp' and 'pm_nl_ctl' tools to
interact with the in-kernel MPTCP path-manager.
Patch 10 adds a '-i' parameter in mptcp_sockopt.sh, pm_netlink.sh, and
simult_flows.sh to use 'ip mptcp' tool instead of 'pm_nl_ctl'.
Patch 11 fixes some ShellCheck warnings in pm_netlink.sh, in order to
drop a ShellCheck's 'disable' instruction.
====================
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Now there are only a few of variables are not using double quotes.
Modifying them, then "shellcheck disable=SC2086" can be dropped.
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch adds '-i' option for mptcp_sockopt.sh, pm_netlink.sh, and
simult_flows.sh, to use 'ip mptcp' command in the tests instead of
'pm_nl_ctl'. Update usage() correspondingly.
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use those newly added pm_nl endpoint ops helpers to replace all 'pm_nl_ctl'
commands with 'limits', 'add', 'del', 'flush', 'show' and 'set' arguments
in scripts mptcp_sockopt.sh and simult_flows.sh.
In pm_netlink.sh, add wrappers of there helpers to make the function names
shorter. Then use the wrappers to replace all 'pm_nl_ctl' commands.
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch exports six endpoint operation helpers with pm_nl_ prefix,
pm_nl_set_limits(), pm_nl_add_endpoint(), pm_nl_del_endpoint(),
pm_nl_flush_endpoint(), pm_nl_show_endpoints() and pm_nl_change_endpoint()
into mptcp_lib.sh as public functions, and renamed each of them with a
mptcp_lib_ prefix. Then these old pm_nl_ prefix helpers in mptcp_join.sh
can be wrappers of mptcp_lib_ prefix ones.
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch uses 'case' statements to simplify pm_nl_add_endpoint() and
pm_nl_check_endpoint(). And simplify pm_nl_check_endpoint() with
check_output() helper. Also update pm_nl_del_endpoint() to avoid the
'double quote' shellcheck warning.
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The output formats of 'ip mptcp' commands are much different from that
of 'pm_nl_ctl' commands.
A new 'change_address' helper is added here, to change the flag of an
address. This is a bit similar to mptcp_join.sh's pm_nl_change_endpoint().
Usage:
Address ID - pm_nl_change_endpoint $ns id $id $flags
IP address - change_address $ns $addr $flags
Use this new helper in pm_netlink.sh to replace all 'pm_nl_ctl set'
commands.
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The output formats of 'ip mptcp' commands are much different from that
of 'pm_nl_ctl' commands.
This patch adds a new helper format_endpoints() to format the outputs of
'ip mptcp' and 'pm_nl_ctl' with 'endpoints' arguments to hide these
differences.
A new helper named get_endpoint() has also been added to show a specific
endpoint identified by the given address ID, similar to mptcp_join.sh's
pm_nl_show_endpoints() helper, but showing all entries.
Use these two helpers in mptcp_join.sh and pm_netlink.sh to replace all
'pm_nl_ctl get' commands and outputs of 'pm_nl_ctl dump/get'.
Suggested-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The output format of 'ip mptcp limits' command is much different from
that of 'pm_nl_ctl limits' command.
This patch adds format_limits() helper to format the outputs of these
two commands to hide the difference. get_limits() has been added to show
the limits.
Use these two helpers in pm_netlink.sh to replace all 'pm_nl_ctl limits'
commands and outputs.
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch exports ip_mptcp into mptcp_lib.sh as a public variable,
named MPTCP_LIB_IP_MPTCP. Add a helper mptcp_lib_set_ip_mptcp() to set
it, and a helper mptcp_lib_is_ip_mptcp() to test whether it is set. Use
these two helpers in mptcp_join.sh.
This patch is prepared for coming commits.
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
'delay 1' in tc-netem is confusing, not sure if it's a delay of 1 second or
1 millisecond. This patch explicitly adds millisecond units to make these
commands clearer.
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
tc are used in some test scripts: mptcp_connect.sh, mptcp_join.sh and
simult_flows.sh. It makes sense to check if tc is installed before running
these scripts, just like other tools. So this patch add 'tc' check for
mptcp_lib_check_tools(), and check it in these test scripts.
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
syzbot is able to trigger an uninit-value in geneve_xmit() [1]
Problem : While most ip tunnel helpers (like ip_tunnel_get_dsfield())
uses skb_protocol(skb, true), pskb_inet_may_pull() is only using
skb->protocol.
If anything else than ETH_P_IPV6 or ETH_P_IP is found in skb->protocol,
pskb_inet_may_pull() does nothing at all.
If a vlan tag was provided by the caller (af_packet in the syzbot case),
the network header might not point to the correct location, and skb
linear part could be smaller than expected.
Add skb_vlan_inet_prepare() to perform a complete mac validation.
Use this in geneve for the moment, I suspect we need to adopt this
more broadly.
v4 - Jakub reported v3 broke l2_tos_ttl_inherit.sh selftest
- Only call __vlan_get_protocol() for vlan types.
Link: https://lore.kernel.org/netdev/20240404100035.3270a7d5@kernel.org/
v2,v3 - Addressed Sabrina comments on v1 and v2
Link: https://lore.kernel.org/netdev/Zg1l9L2BNoZWZDZG@hog/
[1]
BUG: KMSAN: uninit-value in geneve_xmit_skb drivers/net/geneve.c:910 [inline]
BUG: KMSAN: uninit-value in geneve_xmit+0x302d/0x5420 drivers/net/geneve.c:1030
geneve_xmit_skb drivers/net/geneve.c:910 [inline]
geneve_xmit+0x302d/0x5420 drivers/net/geneve.c:1030
__netdev_start_xmit include/linux/netdevice.h:4903 [inline]
netdev_start_xmit include/linux/netdevice.h:4917 [inline]
xmit_one net/core/dev.c:3531 [inline]
dev_hard_start_xmit+0x247/0xa20 net/core/dev.c:3547
__dev_queue_xmit+0x348d/0x52c0 net/core/dev.c:4335
dev_queue_xmit include/linux/netdevice.h:3091 [inline]
packet_xmit+0x9c/0x6c0 net/packet/af_packet.c:276
packet_snd net/packet/af_packet.c:3081 [inline]
packet_sendmsg+0x8bb0/0x9ef0 net/packet/af_packet.c:3113
sock_sendmsg_nosec net/socket.c:730 [inline]
__sock_sendmsg+0x30f/0x380 net/socket.c:745
__sys_sendto+0x685/0x830 net/socket.c:2191
__do_sys_sendto net/socket.c:2203 [inline]
__se_sys_sendto net/socket.c:2199 [inline]
__x64_sys_sendto+0x125/0x1d0 net/socket.c:2199
do_syscall_64+0xd5/0x1f0
entry_SYSCALL_64_after_hwframe+0x6d/0x75
Uninit was created at:
slab_post_alloc_hook mm/slub.c:3804 [inline]
slab_alloc_node mm/slub.c:3845 [inline]
kmem_cache_alloc_node+0x613/0xc50 mm/slub.c:3888
kmalloc_reserve+0x13d/0x4a0 net/core/skbuff.c:577
__alloc_skb+0x35b/0x7a0 net/core/skbuff.c:668
alloc_skb include/linux/skbuff.h:1318 [inline]
alloc_skb_with_frags+0xc8/0xbf0 net/core/skbuff.c:6504
sock_alloc_send_pskb+0xa81/0xbf0 net/core/sock.c:2795
packet_alloc_skb net/packet/af_packet.c:2930 [inline]
packet_snd net/packet/af_packet.c:3024 [inline]
packet_sendmsg+0x722d/0x9ef0 net/packet/af_packet.c:3113
sock_sendmsg_nosec net/socket.c:730 [inline]
__sock_sendmsg+0x30f/0x380 net/socket.c:745
__sys_sendto+0x685/0x830 net/socket.c:2191
__do_sys_sendto net/socket.c:2203 [inline]
__se_sys_sendto net/socket.c:2199 [inline]
__x64_sys_sendto+0x125/0x1d0 net/socket.c:2199
do_syscall_64+0xd5/0x1f0
entry_SYSCALL_64_after_hwframe+0x6d/0x75
CPU: 0 PID: 5033 Comm: syz-executor346 Not tainted 6.9.0-rc1-syzkaller-00005-g928a87efa423 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 02/29/2024
Fixes: d13f048dd40e ("net: geneve: modify IP header check in geneve6_xmit_skb and geneve_xmit_skb")
Reported-by: syzbot+9ee20ec1de7b3168db09@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/netdev/000000000000d19c3a06152f9ee4@google.com/
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Phillip Potter <phil@philpotter.co.uk>
Cc: Sabrina Dubroca <sd@queasysnail.net>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Reviewed-by: Phillip Potter <phil@philpotter.co.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
tp->recvmsg_inq is used from tcp recvmsg() thus should
be in tcp_sock_read_rx group.
tp->tcp_clock_cache and tp->tcp_mstamp are written
both in rx and tx paths, thus are better placed
in tcp_sock_write_txrx group.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If the mac address can not be read from the device registers or the
devicetree, a random address is generated, but this was already done from
usbnet_probe, so it is not necessary to call eth_hw_addr_random from here
again to generate another random address.
Indeed, when reset was also executed from bind, generate another random mac
address invalidated the check from usbnet_probe to configure if the assigned
mac address for the interface was random or not, because it is comparing
with the initial generated random address. Now, with only a reset from open
operation, it is just a harmless simplification.
Signed-off-by: Jose Ignacio Tornos Martinez <jtornosm@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
From Arnd comments:
"The memcpy() in the ip_tunnel_info_opts_set() causes
a string.h fortification warning, with at least gcc-13:
In function 'fortify_memcpy_chk',
inlined from 'ip_tunnel_info_opts_set' at include/net/ip_tunnels.h:619:3,
inlined from 'pfcp_encap_recv' at drivers/net/pfcp.c:84:2:
include/linux/fortify-string.h:553:25: error: call to '__write_overflow_field' declared with attribute warning: detected write beyond size of field (1st parameter); maybe use struct_group()? [-Werror=attribute-warning]
553 | __write_overflow_field(p_size_field, size);"
It is a false-positivie caused by ambiguity of the union.
However, as Arnd noticed, copying here is unescessary. The code can be
simplified to avoid calling ip_tunnel_info_opts_set(), which is doing
copying, setting flags and options_len.
Set correct flags and options_len directly on tun_info.
Fixes: 6dd514f48110 ("pfcp: always set pfcp metadata")
Reported-by: Arnd Bergmann <arnd@arndb.de>
Closes: https://lore.kernel.org/netdev/701f8f93-f5fb-408b-822a-37a1d5c424ba@app.fastmail.com/
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
When sending a patch to (among others) Li Yang the nxp MTA replied that
the address doesn't exist and so the mail couldn't be delivered. The
error code was 550, so at least technically that's not a temporal issue.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Kicinski says:
====================
selftests: net: groundwork for YNL-based tests
Currently the options for writing networking tests are C, bash or
some mix of the two. YAML/Netlink gives us the ability to easily
interface with Netlink in higher level laguages. In particular,
there is a Python library already available in tree, under tools/net.
Add the scaffolding which allows writing tests using this library.
The "scaffolding" is needed because the library lives under
tools/net and uses YAML files from under Documentation/.
So we need a small amount of glue code to find those things
and add them to TEST_FILES.
This series adds both a basic SW sanity test and driver
test which can be run against netdevsim or a real device.
When I develop core code I usually test with netdevsim,
then a real device, and then a backport to Meta's kernel.
Because of the lack of integration, until now I had
to throw away the (YNL-based) test script and netdevsim code.
Running tests in tree directly:
$ ./tools/testing/selftests/net/nl_netdev.py
KTAP version 1
1..2
ok 1 nl_netdev.empty_check
ok 2 nl_netdev.lo_check
# Totals: pass:2 fail:0 xfail:0 xpass:0 skip:0 error:0
in tree via make:
$ make -C tools/testing/selftests/ TARGETS=net \
TEST_PROGS=nl_netdev.py TEST_GEN_PROGS="" run_tests
[ ... ]
and installed externally, all seem to work:
$ make -C tools/testing/selftests/ TARGETS=net \
install INSTALL_PATH=/tmp/ksft-net
$ /tmp/ksft-net/run_kselftest.sh -t net:nl_netdev.py
[ ... ]
For driver tests I followed the lead of net/forwarding and
get the device name from env and/or a config file.
v3:
- fix up netdevsim C
- various small nits in other patches (see changelog in patches)
v2: https://lore.kernel.org/all/20240403023426.1762996-1-kuba@kernel.org/
- don't add to TARGETS, create a deperate variable with deps
- support and use with
- support and use passing arguments to tests
v1: https://lore.kernel.org/all/20240402010520.1209517-1-kuba@kernel.org/
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Add a very simple test to make sure drivers report expected
stats. Drivers which implement FEC or pause configuration
should report relevant stats. Qstats must be reported,
at least packet and byte counts, and they must match
total device stats.
Tested with netdevsim, bnxt, in-tree and installed.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add drivers/net as a target for mixed-use tests.
The setup is expected to work similarly to the forwarding tests.
Since we only need one interface (unlike forwarding tests)
read the target device name from NETIF. If not present we'll
try to run the test against netdevsim.
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Real devices should implement qstats. Devices which support
pause or FEC configuration should also report the relevant stats.
nsim was missing FEC stats completely, some of the qstats
and pause stats required toggling a debugfs knob.
Note that the tests which used pause always initialize the setting
so they shouldn't be affected by the different starting value.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add a trivial test using YNL.
$ ./tools/testing/selftests/net/nl_netdev.py
KTAP version 1
1..2
ok 1 nl_netdev.empty_check
ok 2 nl_netdev.lo_check
Instantiate the family once, it takes longer than the test itself.
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add glue code for accessing the YNL library which lives under
tools/net and YAML spec files from under Documentation/.
Automatically figure out if tests are run in tree or not.
Since we'll want to use this library both from net and
drivers/net test targets make the library a target as well,
and automatically include it when net or drivers/net are
included. Making net/lib a target ensures that we end up
with only one copy of it, and saves us some path guessing.
Add a tiny bit of formatting support to be able to output KTAP
from the start.
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
- bump version strings, by Simon Wunderlich
- prefer kfree_rcu() over call_rcu() with free-only callbacks,
by Dmitry Antipov
- bypass empty buckets in batadv_purge_orig_ref(), by Eric Dumazet
-----BEGIN PGP SIGNATURE-----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=AUfY
-----END PGP SIGNATURE-----
Merge tag 'batadv-next-pullrequest-20240405' of git://git.open-mesh.org/linux-merge
Simon Wunderlich says:
====================
This cleanup patchset includes the following patches:
- bump version strings, by Simon Wunderlich
- prefer kfree_rcu() over call_rcu() with free-only callbacks,
by Dmitry Antipov
- bypass empty buckets in batadv_purge_orig_ref(), by Eric Dumazet
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
- void infinite loop trying to resize local TT, by Sven Eckelmann
-----BEGIN PGP SIGNATURE-----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=t7p3
-----END PGP SIGNATURE-----
Merge tag 'batadv-net-pullrequest-20240405' of git://git.open-mesh.org/linux-merge
Simon Wunderlich says:
====================
Here is a batman-adv bugfix:
- void infinite loop trying to resize local TT, by Sven Eckelmann
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Replace open coded variant of device_is_compatible().
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit 6025b9135f7a ("net: dqs: add NIC stall detector based on BQL")
added three sysfs files.
Use the recommended sysfs_emit() helper.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Breno Leitao <leitao@debian.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
When CONFIG_NET is disabled, an extra warning shows up for this
unused variable:
lib/checksum_kunit.c:218:18: error: 'expected_csum_ipv6_magic' defined but not used [-Werror=unused-const-variable=]
Replace the #ifdef with an IS_ENABLED() check that makes the compiler's
dead-code-elimination take care of the link failure.
Fixes: f24a70106dc1 ("lib: checksum: Fix build with CONFIG_NET=n")
Suggested-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Simon Horman <horms@kernel.org> # build-tested
Signed-off-by: David S. Miller <davem@davemloft.net>
Structures which are about to be copied to userspace shouldn't have
uninitialized fields or paddings.
memset() the whole &ip_tunnel_parm in ip_tunnel_parm_to_user() before
filling it with the kernel data. The compilers will hopefully combine
writes to it.
Fixes: 117aef12a7b1 ("ip_tunnel: use a separate struct to store tunnel params in the kernel")
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/netdev/5f63dd25-de94-4ca3-84e6-14095953db13@moroto.mountain
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
No longer hold RTNL while calling ip6addrlbl_dump()
("ip addrlabel show")
ip6addrlbl_dump() was already mostly relying on RCU anyway.
Add READ_ONCE()/WRITE_ONCE() annotations around
net->ipv6.ip6addrlbl_table.seq
Note that ifal_seq value is currently ignored in iproute2,
and a bit weak.
We might user later cb->seq / nl_dump_check_consistent()
protocol if needed.
Also change return value for a completed dump,
so that NLMSG_DONE can be appended to current skb,
saving one recvmsg() system call.
v2: read net->ipv6.ip6addrlbl_table.seq once, (David Ahern)
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link:https://lore.kernel.org/netdev/67f5cb70-14a4-4455-8372-f039da2f15c2@kernel.org/
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
fqdir_free_fn() is using very expensive rcu_barrier()
When one netns is dismantled, we often call fqdir_exit()
multiple times, typically lauching fqdir_free_fn() twice.
Delaying by one second fqdir_free_fn() helps to reduce
the number of rcu_barrier() calls, and lock contention
on rcu_state.barrier_mutex.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit 3e2f544dd8a33 ("net: get stats64 if device if driver is
configured") moved the callback to dev_get_tstats64() to net core, so,
unless the driver is doing some custom stats collection, it does not
need to set .ndo_get_stats64.
Since this driver is now relying in NETDEV_PCPU_STAT_TSTATS, then, it
doesn't need to set the dev_get_tstats64() generic .ndo_get_stats64
function pointer.
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
With commit 34d21de99cea9 ("net: Move {l,t,d}stats allocation to core and
convert veth & vrf"), stats allocation could be done on net core
instead of in this driver.
With this new approach, the driver doesn't have to bother with error
handling (allocation failure checking, making sure free happens in the
right spot, etc). This is core responsibility now.
Remove the allocation in the ip6_vti and leverage the network
core allocation instead.
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
bch2_acl_from_disk() uses allocate_dropping_locks, and can thus return
a transaction restart - this wasn't handled.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
When allocating bkey_cached from bc->freed_pcpu list, it missed
decreasing the count of nr_freed_pcpu which would cause the mismatch
between the value of nr_freed_pcpu and the list items. This problem
also exists in moving new bkey_cached to bc->freed_pcpu list.
If these happened, the bug info may appear in
bch2_fs_btree_key_cache_exit by the follow code:
BUG_ON(list_count_nodes(&bc->freed_pcpu) != bc->nr_freed_pcpu);
BUG_ON(list_count_nodes(&bc->freed_nonpcpu) != bc->nr_freed_nonpcpu);
Fixes: c65c13f0eac6 ("bcachefs: Run btree key cache shrinker less aggressively")
Signed-off-by: Hongbo Li <lihongbo22@huawei.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
- Fix a timer migration bug that may result in missed events
- Fix timer migration group hierarchy event updates
- Fix a PowerPC64 build warning
- Fix a handful of DocBook annotation bugs
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=4VkW
-----END PGP SIGNATURE-----
Merge tag 'timers-urgent-2024-04-07' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer fixes from Ingo Molnar:
"Fix various timer bugs:
- Fix a timer migration bug that may result in missed events
- Fix timer migration group hierarchy event updates
- Fix a PowerPC64 build warning
- Fix a handful of DocBook annotation bugs"
* tag 'timers-urgent-2024-04-07' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
timers/migration: Return early on deactivation
timers/migration: Fix ignored event due to missing CPU update
vdso: Use CONFIG_PAGE_SHIFT in vdso/datapage.h
timers: Fix text inconsistencies and spelling
tick/sched: Fix struct tick_sched doc warnings
tick/sched: Fix various kernel-doc warnings
timers: Fix kernel-doc format and add Return values
time/timekeeping: Fix kernel-doc warnings and typos
time/timecounter: Fix inline documentation
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQJFBAABCgAvFiEEBpT5eoXrXCwVQwEKEnMQ0APhK1gFAmYSRmYRHG1pbmdvQGtl
cm5lbC5vcmcACgkQEnMQ0APhK1gGLg/9GQS5B/kub1ydjoFx2sCuHe5Zl9vLXpLg
515yOSKRWnpzjDJaMlAJg9MHiNlcR2Df5rcnVLaKpQSomajFQBKpsJkX4skqAUm3
wuuCwP0Wc+XJFNDzHGb5yqWaCo06XI80BnZyGHDHDD6jJ5fypzKVyJERnGBpLwjO
h2YTomtLP5j5Gq7em2d+A9pVRpKwcBOCB8K2sBnJRlPNVR190MWTOm1wEQ+vYQeR
x8nIx7WaaA6SInqWVGkhloasTmeWEH89Q2wjCltZpYFnRiEa1yS/VHVT6ZQKrpOy
+mBqr92tXdxT2Y+8LNAMUg5PgRVMbZoY+Glin0Q0N4Cg92BZIl8NX8wtb3oacYgd
XhiRyRWaw8JDCC2mEmhlEa01M2Y7PXtcBjvOVQwoZLS/711Zyf+fHjyX4FUG8Vcb
T0PgaQoterlVnN4H2uWq8Za8ubjI0TW0nRBw2oQKlSv/5ldJ2IKJsQdsbl1q4wQr
TtYJY2bq5Hrn+qlFZi6jFB2KvBOUV3molXlZAPJ0Nr/Y9mkMBRVcq6ufrAunpgUB
l62Ls61HHZ9+hVNIIpM8/p/rTYjeVilA7vjHGiCJFcsclvPNBBkobtbpri/ioE0t
4+pH60LsMBIwAhOAKlJ6Jzf4LaWEikJfDPpj8yMKixGOxDT542rUN7A3NwdP2H6b
2fV3Nyr7sEw=
=v7jY
-----END PGP SIGNATURE-----
Merge tag 'perf-urgent-2024-04-07' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 perf fix from Ingo Molnar:
"Fix a combined PEBS events bug on x86 Intel CPUs"
* tag 'perf-urgent-2024-04-07' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86/intel/ds: Don't clear ->pebs_data_cfg for the last PEBS event
