IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
tegra by adding a dependency on ARCH_TEGRA along with COMPILE_TEST
(Dmitry Osipenko)
- Fix the error code for the exynos when devm_get_clk() fails (Dan
Carpenter)
- Add the TCC cooling support for AlderLake platform (Sumeet Pawnikar)
- Add support for hardware trip points for the rcar gen3 thermal
driver and store TSC id as unsigned int (Niklas Söderlund)
- Replace the deprecated CPU-hotplug functions get_online_cpus() and
put_online_cpus (Sebastian Andrzej Siewior)
- Add the thermal tools directory in the MAINTAINERS file (Daniel
Lezcano)
- Fix the Makefile and the cross compilation flags for the userspace
'tmon' tool (Rolf Eike Beer)
- Allow to use the IMOK independently from the GDDV on Int340x (Sumeet
Pawnikar)
- Fix the stub thermal_cooling_device_register() function prototype
which does not match the real function (Arnd Bergmann)
- Make the thermal trip point optional in the DT bindings (Maxime
Ripard)
- Fix a typo in a comment in the core code (Geert Uytterhoeven)
- Reduce the verbosity of the trace in the SoC thermal tegra driver
(Dmitry Osipenko)
- Add the support for the LMh (Limit Management hardware) driver on
the QCom platforms (Thara Gopinath)
- Allow processing of HWP interrupt by adding a weak function in the
Intel driver (Srinivas Pandruvada)
- Prevent an abort of the sensor probe is a channel is not used
(Matthias Kaehlcke)
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEGn3N4YVz0WNVyHskqDIjiipP6E8FAmE7yAcACgkQqDIjiipP
6E8WKwgAmI+kdOURCz1CtCIv6FnQFx20suxZidfATPULBPZ8zcHqdjxJECXJpvDz
y8T8dGAPRqXmMBJm2vF/qVraHaDJvscHXaflhsurhyEp0tiGptNeugBosso0jDEQ
JFrQ6Rny/NCmNMOkWW4YlSfkik0zQ43xlHocy3UfOKfcshhYWGsPTbIXdA6wH/zh
3tFW8j327tkyenrKZiaioJOSX88Oyy7Ft8l5k0HP+hPYkrvihWDJuEfEEmpfkdA7
Q70Lacf2QtFP8mUfGKpQxURSgndjphDPU7tzP5NqqWvLuT94aTspvJx4ywVwK8Iv
o+jNvR33yBIs5FXXB7B1ymkNE1h8uQ==
=blIQ
-----END PGP SIGNATURE-----
Merge tag 'thermal-v5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux
Pull thermal updates from Daniel Lezcano:
- Add the tegra3 thermal sensor and fix the compilation testing on
tegra by adding a dependency on ARCH_TEGRA along with COMPILE_TEST
(Dmitry Osipenko)
- Fix the error code for the exynos when devm_get_clk() fails (Dan
Carpenter)
- Add the TCC cooling support for AlderLake platform (Sumeet Pawnikar)
- Add support for hardware trip points for the rcar gen3 thermal driver
and store TSC id as unsigned int (Niklas Söderlund)
- Replace the deprecated CPU-hotplug functions get_online_cpus() and
put_online_cpus (Sebastian Andrzej Siewior)
- Add the thermal tools directory in the MAINTAINERS file (Daniel
Lezcano)
- Fix the Makefile and the cross compilation flags for the userspace
'tmon' tool (Rolf Eike Beer)
- Allow to use the IMOK independently from the GDDV on Int340x (Sumeet
Pawnikar)
- Fix the stub thermal_cooling_device_register() function prototype
which does not match the real function (Arnd Bergmann)
- Make the thermal trip point optional in the DT bindings (Maxime
Ripard)
- Fix a typo in a comment in the core code (Geert Uytterhoeven)
- Reduce the verbosity of the trace in the SoC thermal tegra driver
(Dmitry Osipenko)
- Add the support for the LMh (Limit Management hardware) driver on the
QCom platforms (Thara Gopinath)
- Allow processing of HWP interrupt by adding a weak function in the
Intel driver (Srinivas Pandruvada)
- Prevent an abort of the sensor probe is a channel is not used
(Matthias Kaehlcke)
* tag 'thermal-v5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux:
thermal/drivers/qcom/spmi-adc-tm5: Don't abort probing if a sensor is not used
thermal/drivers/intel: Allow processing of HWP interrupt
dt-bindings: thermal: Add dt binding for QCOM LMh
thermal/drivers/qcom: Add support for LMh driver
firmware: qcom_scm: Introduce SCM calls to access LMh
thermal/drivers/tegra-soctherm: Silence message about clamped temperature
thermal: Spelling s/scallbacks/callbacks/
dt-bindings: thermal: Make trips node optional
thermal/core: Fix thermal_cooling_device_register() prototype
thermal/drivers/int340x: Use IMOK independently
tools/thermal/tmon: Add cross compiling support
thermal/tools/tmon: Improve the Makefile
MAINTAINERS: Add missing userspace thermal tools to the thermal section
thermal/drivers/intel_powerclamp: Replace deprecated CPU-hotplug functions.
thermal/drivers/rcar_gen3_thermal: Store TSC id as unsigned int
thermal/drivers/rcar_gen3_thermal: Add support for hardware trip points
drivers/thermal/intel: Add TCC cooling support for AlderLake platform
thermal/drivers/exynos: Fix an error code in exynos_tmu_probe()
thermal/drivers/tegra: Correct compile-testing of drivers
thermal/drivers/tegra: Add driver for Tegra30 thermal sensor
Pull dmi fix from Jean Delvare.
Unbreak some existing udev/hwdb modalias matches due to misplaced
product_sku field.
* 'dmi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging:
firmware: dmi: Move product_sku info to the end of the modalias
- Add -s option (strict mode) to merge_config.sh to make it fail when
any symbol is redefined.
- Show a warning if a different compiler is used for building external
modules.
- Infer --target from ARCH for CC=clang to let you cross-compile the
kernel without CROSS_COMPILE.
- Make the integrated assembler default (LLVM_IAS=1) for CC=clang.
- Add <linux/stdarg.h> to the kernel source instead of borrowing
<stdarg.h> from the compiler.
- Add Nick Desaulniers as a Kbuild reviewer.
- Drop stale cc-option tests.
- Fix the combination of CONFIG_TRIM_UNUSED_KSYMS and CONFIG_LTO_CLANG
to handle symbols in inline assembly.
- Show a warning if 'FORCE' is missing for if_changed rules.
- Various cleanups
-----BEGIN PGP SIGNATURE-----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=lw3M
-----END PGP SIGNATURE-----
Merge tag 'kbuild-v5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- Add -s option (strict mode) to merge_config.sh to make it fail when
any symbol is redefined.
- Show a warning if a different compiler is used for building external
modules.
- Infer --target from ARCH for CC=clang to let you cross-compile the
kernel without CROSS_COMPILE.
- Make the integrated assembler default (LLVM_IAS=1) for CC=clang.
- Add <linux/stdarg.h> to the kernel source instead of borrowing
<stdarg.h> from the compiler.
- Add Nick Desaulniers as a Kbuild reviewer.
- Drop stale cc-option tests.
- Fix the combination of CONFIG_TRIM_UNUSED_KSYMS and CONFIG_LTO_CLANG
to handle symbols in inline assembly.
- Show a warning if 'FORCE' is missing for if_changed rules.
- Various cleanups
* tag 'kbuild-v5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (39 commits)
kbuild: redo fake deps at include/ksym/*.h
kbuild: clean up objtool_args slightly
modpost: get the *.mod file path more simply
checkkconfigsymbols.py: Fix the '--ignore' option
kbuild: merge vmlinux_link() between ARCH=um and other architectures
kbuild: do not remove 'linux' link in scripts/link-vmlinux.sh
kbuild: merge vmlinux_link() between the ordinary link and Clang LTO
kbuild: remove stale *.symversions
kbuild: remove unused quiet_cmd_update_lto_symversions
gen_compile_commands: extract compiler command from a series of commands
x86: remove cc-option-yn test for -mtune=
arc: replace cc-option-yn uses with cc-option
s390: replace cc-option-yn uses with cc-option
ia64: move core-y in arch/ia64/Makefile to arch/ia64/Kbuild
sparc: move the install rule to arch/sparc/Makefile
security: remove unneeded subdir-$(CONFIG_...)
kbuild: sh: remove unused install script
kbuild: Fix 'no symbols' warning when CONFIG_TRIM_UNUSD_KSYMS=y
kbuild: Switch to 'f' variants of integrated assembler flag
kbuild: Shuffle blank line to improve comment meaning
...
The isa_bus_to_virt is only needed under X86 and in fact the code
that sets the ibft_phys_addr is only compiled under X86.
As such lets just ifdef the code.
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Vijayendra Suman <vijayendra.suman@oracle.com>
CC: Maurizio Lombardi <mlombard@redhat.com>
CC: Mike Rapoport <rppt@kernel.org>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
---
v2: Remove the ibft_phys_addr as it is defined in iscsi_ibft.h
Commit e26f023e01 ("firmware/dmi: Include product_sku info to modalias")
added a new field to the modalias in the middle of the modalias, breaking
some existing udev/hwdb matches on the whole modalias without a wildcard
('*') in between the pvr and rvn fields.
All modalias matches in e.g. :
https://github.com/systemd/systemd/blob/main/hwdb.d/60-sensor.hwdb
deliberately end in ':*' so that new fields can be added at *the end* of
the modalias, but adding a new field in the middle like this breaks things.
Move the new sku field to the end of the modalias to fix some hwdb
entries no longer matching.
The new sku field has already been put to use in 2 new hwdb entries:
sensor:modalias:platform:HID-SENSOR-200073:dmi:*svnDell*:sku0A3E:*
ACCEL_LOCATION=base
sensor:modalias:platform:HID-SENSOR-200073:dmi:*svnDell*:sku0B0B:*
ACCEL_LOCATION=base
The wildcard use before and after the sku in these matches means that they
should keep working with the sku moved to the end.
Note that there is a second instance of in essence the same problem,
commit f5152f4ded ("firmware/dmi: Report DMI Bios & EC firmware release")
Added 2 new br and efr fields in the middle of the modalias. This too
breaks some hwdb modalias matches, but this has gone unnoticed for over
a year. So some newer hwdb modalias matches actually depend on these
fields being in the middle of the string. Moving these to the end now
would break 3 hwdb entries, while fixing 8 entries.
Since there is no good answer for the new br and efr fields I have chosen
to leave these as is. Instead I'll submit a hwdb update to put a wildcard
at the place where these fields may or may not be present depending on the
kernel version.
BugLink: https://github.com/systemd/systemd/issues/20550
Link: https://github.com/systemd/systemd/pull/20562
Fixes: e26f023e01 ("firmware/dmi: Include product_sku info to modalias")
Cc: stable@vger.kernel.org
Cc: Kai-Chuan Hsieh <kaichuan.hsieh@canonical.com>
Cc: Erwan Velu <e.velu@criteo.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jean Delvare <jdelvare@suse.de>
These are updates for drivers that are tied to a particular SoC,
including the correspondig device tree bindings:
- A couple of reset controller changes for unisoc, uniphier, renesas
and zte platforms
- memory controller driver fixes for omap and tegra
- Rockchip io domain driver updates
- Lots of updates for qualcomm platforms, mostly touching their
firmware and power management drivers
- Tegra FUSE and firmware driver updateѕ
- Support for virtio transports in the SCMI firmware framework
- cleanup of ixp4xx drivers, towards enabling multiplatform
support and bringing it up to date with modern platforms
- Minor updates for keystone, mediatek, omap, renesas.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iD8DBQBhLz215t5GS2LDRf4RAjlHAJ473D0PymaTzv68EuPHThG+DEPifQCdGjLq
QGBB6JidIP8rtEdC+LWBB8I=
=M5+N
-----END PGP SIGNATURE-----
Merge tag 'drivers-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC driver updates from Arnd Bergmann:
"These are updates for drivers that are tied to a particular SoC,
including the correspondig device tree bindings:
- A couple of reset controller changes for unisoc, uniphier, renesas
and zte platforms
- memory controller driver fixes for omap and tegra
- Rockchip io domain driver updates
- Lots of updates for qualcomm platforms, mostly touching their
firmware and power management drivers
- Tegra FUSE and firmware driver updateѕ
- Support for virtio transports in the SCMI firmware framework
- cleanup of ixp4xx drivers, towards enabling multiplatform support
and bringing it up to date with modern platforms
- Minor updates for keystone, mediatek, omap, renesas"
* tag 'drivers-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (96 commits)
reset: simple: remove ZTE details in Kconfig help
soc: rockchip: io-domain: Remove unneeded semicolon
soc: rockchip: io-domain: add rk3568 support
dt-bindings: power: add rk3568-pmu-io-domain support
bus: ixp4xx: return on error in ixp4xx_exp_probe()
soc: renesas: Prefer memcpy() over strcpy()
firmware: tegra: Stop using seq_get_buf()
soc/tegra: fuse: Enable fuse clock on suspend for Tegra124
soc/tegra: fuse: Add runtime PM support
soc/tegra: fuse: Clear fuse->clk on driver probe failure
soc/tegra: pmc: Prevent racing with cpuilde driver
soc/tegra: bpmp: Remove unused including <linux/version.h>
dt-bindings: soc: ti: pruss: Add dma-coherent property
soc: ti: Remove pm_runtime_irq_safe() usage for smartreflex
soc: ti: pruss: Enable support for ICSSG subsystems on K3 AM64x SoCs
dt-bindings: soc: ti: pruss: Update bindings for K3 AM64x SoCs
firmware: arm_scmi: Use WARN_ON() to check configured transports
firmware: arm_scmi: Fix boolconv.cocci warnings
soc: mediatek: mmsys: Fix missing UFOE component in mt8173 table routing
soc: mediatek: mmsys: add MT8365 support
...
core:
- extract i915 eDP backlight into core
- DP aux bus support
- drm_device.irq_enabled removed
- port drivers to native irq interfaces
- export gem shadow plane handling for vgem
- print proper driver name in framebuffer registration
- driver fixes for implicit fencing rules
- ARM fixed rate compression modifier added
- updated fb damage handling
- rmfb ioctl logging/docs
- drop drm_gem_object_put_locked
- define DRM_FORMAT_MAX_PLANES
- add gem fb vmap/vunmap helpers
- add lockdep_assert(once) helpers
- mark drm irq midlayer as legacy
- use offset adjusted bo mapping conversion
vgaarb:
- cleanups
fbdev:
- extend efifb handling to all arches
- div by 0 fixes for multiple drivers
udmabuf:
- add hugepage mapping support
dma-buf:
- non-dynamic exporter fixups
- document implicit fencing rules
amdgpu:
- Initial Cyan Skillfish support
- switch virtual DCE over to vkms based atomic
- VCN/JPEG power down fixes
- NAVI PCIE link handling fixes
- AMD HDMI freesync fixes
- Yellow Carp + Beige Goby fixes
- Clockgating/S0ix/SMU/EEPROM fixes
- embed hw fence in job
- rework dma-resv handling
- ensure eviction to system ram
amdkfd:
- uapi: SVM address range query added
- sysfs leak fix
- GPUVM TLB optimizations
- vmfault/migration counters
i915:
- Enable JSL and EHL by default
- preliminary XeHP/DG2 support
- remove all CNL support (never shipped)
- move to TTM for discrete memory support
- allow mixed object mmap handling
- GEM uAPI spring cleaning
- add I915_MMAP_OBJECT_FIXED
- reinstate ADL-P mmap ioctls
- drop a bunch of unused by userspace features
- disable and remove GPU relocations
- revert some i915 misfeatures
- major refactoring of GuC for Gen11+
- execbuffer object locking separate step
- reject caching/set-domain on discrete
- Enable pipe DMC loading on XE-LPD and ADL-P
- add PSF GV point support
- Refactor and fix DDI buffer translations
- Clean up FBC CFB allocation code
- Finish INTEL_GEN() and friends macro conversions
nouveau:
- add eDP backlight support
- implicit fence fix
msm:
- a680/7c3 support
- drm/scheduler conversion
panfrost:
- rework GPU reset
virtio:
- fix fencing for planes
ast:
- add detect support
bochs:
- move to tiny GPU driver
vc4:
- use hotplug irqs
- HDMI codec support
vmwgfx:
- use internal vmware device headers
ingenic:
- demidlayering irq
rcar-du:
- shutdown fixes
- convert to bridge connector helpers
zynqmp-dsub:
- misc fixes
mgag200:
- convert PLL handling to atomic
mediatek:
- MT8133 AAL support
- gem mmap object support
- MT8167 support
etnaviv:
- NXP Layerscape LS1028A SoC support
- GEM mmap cleanups
tegra:
- new user API
exynos:
- missing unlock fix
- build warning fix
- use refcount_t
-----BEGIN PGP SIGNATURE-----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=vZkA
-----END PGP SIGNATURE-----
Merge tag 'drm-next-2021-08-31-1' of git://anongit.freedesktop.org/drm/drm
Pull drm updates from Dave Airlie:
"Highlights:
- i915 has seen a lot of refactoring and uAPI cleanups due to a
change in the upstream direction going forward
This has all been audited with known userspace, but there may be
some pitfalls that were missed.
- i915 now uses common TTM to enable discrete memory on DG1/2 GPUs
- i915 enables Jasper and Elkhart Lake by default and has preliminary
XeHP/DG2 support
- amdgpu adds support for Cyan Skillfish
- lots of implicit fencing rules documented and fixed up in drivers
- msm now uses the core scheduler
- the irq midlayer has been removed for non-legacy drivers
- the sysfb code now works on more than x86.
Otherwise the usual smattering of stuff everywhere, panels, bridges,
refactorings.
Detailed summary:
core:
- extract i915 eDP backlight into core
- DP aux bus support
- drm_device.irq_enabled removed
- port drivers to native irq interfaces
- export gem shadow plane handling for vgem
- print proper driver name in framebuffer registration
- driver fixes for implicit fencing rules
- ARM fixed rate compression modifier added
- updated fb damage handling
- rmfb ioctl logging/docs
- drop drm_gem_object_put_locked
- define DRM_FORMAT_MAX_PLANES
- add gem fb vmap/vunmap helpers
- add lockdep_assert(once) helpers
- mark drm irq midlayer as legacy
- use offset adjusted bo mapping conversion
vgaarb:
- cleanups
fbdev:
- extend efifb handling to all arches
- div by 0 fixes for multiple drivers
udmabuf:
- add hugepage mapping support
dma-buf:
- non-dynamic exporter fixups
- document implicit fencing rules
amdgpu:
- Initial Cyan Skillfish support
- switch virtual DCE over to vkms based atomic
- VCN/JPEG power down fixes
- NAVI PCIE link handling fixes
- AMD HDMI freesync fixes
- Yellow Carp + Beige Goby fixes
- Clockgating/S0ix/SMU/EEPROM fixes
- embed hw fence in job
- rework dma-resv handling
- ensure eviction to system ram
amdkfd:
- uapi: SVM address range query added
- sysfs leak fix
- GPUVM TLB optimizations
- vmfault/migration counters
i915:
- Enable JSL and EHL by default
- preliminary XeHP/DG2 support
- remove all CNL support (never shipped)
- move to TTM for discrete memory support
- allow mixed object mmap handling
- GEM uAPI spring cleaning
- add I915_MMAP_OBJECT_FIXED
- reinstate ADL-P mmap ioctls
- drop a bunch of unused by userspace features
- disable and remove GPU relocations
- revert some i915 misfeatures
- major refactoring of GuC for Gen11+
- execbuffer object locking separate step
- reject caching/set-domain on discrete
- Enable pipe DMC loading on XE-LPD and ADL-P
- add PSF GV point support
- Refactor and fix DDI buffer translations
- Clean up FBC CFB allocation code
- Finish INTEL_GEN() and friends macro conversions
nouveau:
- add eDP backlight support
- implicit fence fix
msm:
- a680/7c3 support
- drm/scheduler conversion
panfrost:
- rework GPU reset
virtio:
- fix fencing for planes
ast:
- add detect support
bochs:
- move to tiny GPU driver
vc4:
- use hotplug irqs
- HDMI codec support
vmwgfx:
- use internal vmware device headers
ingenic:
- demidlayering irq
rcar-du:
- shutdown fixes
- convert to bridge connector helpers
zynqmp-dsub:
- misc fixes
mgag200:
- convert PLL handling to atomic
mediatek:
- MT8133 AAL support
- gem mmap object support
- MT8167 support
etnaviv:
- NXP Layerscape LS1028A SoC support
- GEM mmap cleanups
tegra:
- new user API
exynos:
- missing unlock fix
- build warning fix
- use refcount_t"
* tag 'drm-next-2021-08-31-1' of git://anongit.freedesktop.org/drm/drm: (1318 commits)
drm/amd/display: Move AllowDRAMSelfRefreshOrDRAMClockChangeInVblank to bounding box
drm/amd/display: Remove duplicate dml init
drm/amd/display: Update bounding box states (v2)
drm/amd/display: Update number of DCN3 clock states
drm/amdgpu: disable GFX CGCG in aldebaran
drm/amdgpu: Clear RAS interrupt status on aldebaran
drm/amdgpu: Add support for RAS XGMI err query
drm/amdkfd: Account for SH/SE count when setting up cu masks.
drm/amdgpu: rename amdgpu_bo_get_preferred_pin_domain
drm/amdgpu: drop redundant cancel_delayed_work_sync call
drm/amdgpu: add missing cleanups for more ASICs on UVD/VCE suspend
drm/amdgpu: add missing cleanups for Polaris12 UVD/VCE on suspend
drm/amdkfd: map SVM range with correct access permission
drm/amdkfd: check access permisson to restore retry fault
drm/amdgpu: Update RAS XGMI Error Query
drm/amdgpu: Add driver infrastructure for MCA RAS
drm/amd/display: Add Logging for HDMI color depth information
drm/amd/amdgpu: consolidate PSP TA init shared buf functions
drm/amd/amdgpu: add name field back to ras_common_if
drm/amdgpu: Fix build with missing pm_suspend_target_state module export
...
Here is the big set of driver core patches for 5.15-rc1.
These do change a number of different things across different
subsystems, and because of that, there were 2 stable tags created that
might have already come into your tree from different pulls that did the
following
- changed the bus remove callback to return void
- sysfs iomem_get_mapping rework
The latter one will cause a tiny merge issue with your tree, as there
was a last-minute fix for this in 5.14 in your tree, but the fixup
should be "obvious". If you want me to provide a fixed merge for this,
please let me know.
Other than those two things, there's only a few small things in here:
- kernfs performance improvements for huge numbers of sysfs
users at once
- tiny api cleanups
- other minor changes
All of these have been in linux-next for a while with no reported
problems, other than the before-mentioned merge issue.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYS+FLQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ylXuACfWECnysDtXNe66DdETCFs1a1RToYAoMokWeU5
s8VFP1NY2BjmxJbkebLL
=8kVu
-----END PGP SIGNATURE-----
Merge tag 'driver-core-5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here is the big set of driver core patches for 5.15-rc1.
These do change a number of different things across different
subsystems, and because of that, there were 2 stable tags created that
might have already come into your tree from different pulls that did
the following
- changed the bus remove callback to return void
- sysfs iomem_get_mapping rework
Other than those two things, there's only a few small things in here:
- kernfs performance improvements for huge numbers of sysfs users at
once
- tiny api cleanups
- other minor changes
All of these have been in linux-next for a while with no reported
problems, other than the before-mentioned merge issue"
* tag 'driver-core-5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (33 commits)
MAINTAINERS: Add dri-devel for component.[hc]
driver core: platform: Remove platform_device_add_properties()
ARM: tegra: paz00: Handle device properties with software node API
bitmap: extend comment to bitmap_print_bitmask/list_to_buf
drivers/base/node.c: use bin_attribute to break the size limitation of cpumap ABI
topology: use bin_attribute to break the size limitation of cpumap ABI
lib: test_bitmap: add bitmap_print_bitmask/list_to_buf test cases
cpumask: introduce cpumap_print_list/bitmask_to_buf to support large bitmask and list
sysfs: Rename struct bin_attribute member to f_mapping
sysfs: Invoke iomem_get_mapping() from the sysfs open callback
debugfs: Return error during {full/open}_proxy_open() on rmmod
zorro: Drop useless (and hardly used) .driver member in struct zorro_dev
zorro: Simplify remove callback
sh: superhyway: Simplify check in remove callback
nubus: Simplify check in remove callback
nubus: Make struct nubus_driver::remove return void
kernfs: dont call d_splice_alias() under kernfs node lock
kernfs: use i_lock to protect concurrent inode updates
kernfs: switch kernfs to use an rwsem
kernfs: use VFS negative dentry caching
...
Here is the big set of char/misc driver changes for 5.15-rc1.
Lots of different driver subsystems are being updated in here, notably:
- mhi subsystem update
- fpga subsystem update
- coresight/hwtracing subsystem update
- interconnect subsystem update
- nvmem subsystem update
- parport drivers update
- phy subsystem update
- soundwire subsystem update
and there are some other char/misc drivers being updated as well:
- binder driver additions
- new misc drivers
- lkdtm driver updates
- mei driver updates
- sram driver updates
- other minor driver updates.
Note, there are no habanna labs driver updates in this pull request,
that will probably come later before -rc1 is out in a different request.
All of these have been in linux-next for a while with no reported
problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYS+Kyw8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymlpACg0JM+hSeo8T5GtwZksZ1QXXQfh8sAoK6Dt6xF
e62OQuuMFT0Un0qOflZk
=emH+
-----END PGP SIGNATURE-----
Merge tag 'char-misc-5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char / misc driver updates from Greg KH:
"Here is the big set of char/misc driver changes for 5.15-rc1.
Lots of different driver subsystems are being updated in here,
notably:
- mhi subsystem update
- fpga subsystem update
- coresight/hwtracing subsystem update
- interconnect subsystem update
- nvmem subsystem update
- parport drivers update
- phy subsystem update
- soundwire subsystem update
and there are some other char/misc drivers being updated as well:
- binder driver additions
- new misc drivers
- lkdtm driver updates
- mei driver updates
- sram driver updates
- other minor driver updates.
Note, there are no habanalabs driver updates in this pull request,
that will probably come later before -rc1 is out in a different
request.
All of these have been in linux-next for a while with no reported
problems"
* tag 'char-misc-5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (169 commits)
Revert "bus: mhi: Add inbound buffers allocation flag"
misc/pvpanic: fix set driver data
VMCI: fix NULL pointer dereference when unmapping queue pair
char: mware: fix returnvar.cocci warnings
parport: remove non-zero check on count
soundwire: cadence: do not extend reset delay
soundwire: intel: conditionally exit clock stop mode on system suspend
soundwire: intel: skip suspend/resume/wake when link was not started
soundwire: intel: fix potential race condition during power down
phy: qcom-qmp: Add support for SM6115 UFS phy
dt-bindings: phy: qcom,qmp: Add SM6115 UFS PHY bindings
phy: qmp: Provide unique clock names for DP clocks
lkdtm: remove IDE_CORE_CP crashpoint
lkdtm: replace SCSI_DISPATCH_CMD with SCSI_QUEUE_RQ
coresight: Replace deprecated CPU-hotplug functions.
Documentation: coresight: Add documentation for CoreSight config
coresight: syscfg: Add initial configfs support
coresight: config: Add preloaded configurations
coresight: etm4x: Add complex configuration handlers to etmv4
coresight: etm-perf: Update to activate selected configuration
...
Pull ibft updates from Konrad Rzeszutek Wilk:
"A fix for iBFT parsing code badly interfacing when KASLR is enabled"
* 'stable/for-linus-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/ibft:
iscsi_ibft: fix warning in reserve_ibft_region()
iscsi_ibft: fix crash due to KASLR physical memory remapping
- EFI CPER parsing improvements,
- Don't take the address of efi_guid_t internal fields
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=nD2k
-----END PGP SIGNATURE-----
Merge tag 'efi-core-2021-08-30' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull EFI updates from Ingo Molnar:
"A handful of EFI changes for this cycle:
- EFI CPER parsing improvements
- Don't take the address of efi_guid_t internal fields"
* tag 'efi-core-2021-08-30' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
efi: cper: check section header more appropriately
efi: Don't use knowledge about efi_guid_t internals
efi: cper: fix scnprintf() use in cper_mem_err_location()
Pull crypto updates from Herbert Xu:
"Algorithms:
- Add AES-NI/AVX/x86_64 implementation of SM4.
Drivers:
- Add Arm SMCCC TRNG based driver"
[ And obviously a lot of random fixes and updates - Linus]
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (84 commits)
crypto: sha512 - remove imaginary and mystifying clearing of variables
crypto: aesni - xts_crypt() return if walk.nbytes is 0
padata: Remove repeated verbose license text
crypto: ccp - Add support for new CCP/PSP device ID
crypto: x86/sm4 - add AES-NI/AVX2/x86_64 implementation
crypto: x86/sm4 - export reusable AESNI/AVX functions
crypto: rmd320 - remove rmd320 in Makefile
crypto: skcipher - in_irq() cleanup
crypto: hisilicon - check _PS0 and _PR0 method
crypto: hisilicon - change parameter passing of debugfs function
crypto: hisilicon - support runtime PM for accelerator device
crypto: hisilicon - add runtime PM ops
crypto: hisilicon - using 'debugfs_create_file' instead of 'debugfs_create_regset32'
crypto: tcrypt - add GCM/CCM mode test for SM4 algorithm
crypto: testmgr - Add GCM/CCM mode test of SM4 algorithm
crypto: tcrypt - Fix missing return value check
crypto: hisilicon/sec - modify the hardware endian configuration
crypto: hisilicon/sec - fix the abnormal exiting process
crypto: qat - store vf.compatible flag
crypto: qat - do not export adf_iov_putmsg()
...
When checking a generic status block, we iterate over all the generic data
blocks. The loop condition checks that the generic data block is valid.
Because the size of data blocks (excluding error data) may vary depending
on the revision and the revision is contained within the data block, we
should ensure that enough of the current data block is valid appropriately
for different revision.
Signed-off-by: Shuai Xue <xueshuai@linux.alibaba.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
The last two if-clauses fail to update n, so whatever they might have
written at &msg[n] would be cut off by the final nul-termination.
That nul-termination is redundant; scnprintf(), just like snprintf(),
guarantees a nul-terminated output buffer, provided the buffer size is
positive.
And there's no need to discount one byte from the initial buffer;
vsnprintf() expects to be given the full buffer size - it's not going
to write the nul-terminator one beyond the given (buffer, size) pair.
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Ship minimal stdarg.h (1 type, 4 macros) as <linux/stdarg.h>.
stdarg.h is the only userspace header commonly used in the kernel.
GPL 2 version of <stdarg.h> can be extracted from
http://archive.debian.org/debian/pool/main/g/gcc-4.2/gcc-4.2_4.2.4.orig.tar.gz
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
The reference taken by 'of_find_device_by_node()' must be released when
not needed anymore.
Add the corresponding 'put_device()' in the normal and error handling
paths.
Fixes: 4e3d60656a ("ARM: bcm2835: Add the Raspberry Pi firmware driver")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/5e17e5409b934cd08bf6f9279c73be5c1cb11cce.1628232242.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This fixes the "shared memory state machine" (SMSM) interrupt logic to
avoid missing transitions happening while the interrupts are masked.
SM6115 support is added to smd-rpm and rpmpd.
The Qualcomm SCM firmware driver is once again made possible to compile
and load as a kernel module.
An out-of-bounds error related to the cooling devices of the AOSS driver
is corrected. The binding is converted to YAML and a generic compatible
is introduced to reduce the driver churn.
The GENI wrapper gains a helper function used in I2C and SPI for
switching the serial engine hardware to use the wrapper's DMA-engine.
Lastly it contains a number of cleanups and smaller fixes for rpmhpd,
socinfo, CPR, mdt_loader and the GENI DT binding.
-----BEGIN PGP SIGNATURE-----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=88qN
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAmEdDA4ACgkQmmx57+YA
GNmAmw//WfdprWl2SJGfyojhDeeUq6ZeNesMFBabFss7Ar++szhyFSu3bqlyH6WC
ZgPOZOJakKQq2EGKNm7RuEgeR8sEUs9czetNO8AqVy1szlhqnUKhG0OO+uLqRLQn
Hvf1fc+uG3xeaFP0/Q/4fuG+GL1fnmXIJWl0nZFUGfWyQ3mxxm5fLq1DM27KAzP1
eKMqtCh3F0qHMWZTJd084LO2XXyUTVVBbXAQKX/IQmH6+BK3Q2YMToo/919HCnZs
XfgcdKuB/fOfi1n+PgGNODdTJ/Uy10WkSALZHlzKfr77AUCs9+RWxdkogCmACJBs
IhNoZ/6D6a6kCIEuaEjHtNsMAVoG0bYpaB9vFLhJgF4wfdCd+DuOXkCy9B7vI4/8
7/SKArKYrG1sPlhDGFaWZjWEFBCGycDDsHQ4T2ecZ5d3f+Kuimgx7NLYhKRHPI+9
8QVJwNbIGrNXjwIn6S0AeqDLoXIzMmAbNvuX1lFz0OyEkbgDYPSuUPmKYoKh0VL5
+aTPYANbKxfF7nIPxfN580yjQGZmJmctyhkqnavEB6HdNySO2/oM5F2uGRVdVKnv
5HaPLqWZf2PffjAg+bU3O3bBlYRdIpEaKaa1eHFIMTgK7nlcvFESWWtwg+IBKdqY
JI3Kkg5PP3jxqxybzgFPE298vI1G6/so2A12HBi0dl28XheK+wM=
=dS58
-----END PGP SIGNATURE-----
Merge tag 'qcom-drivers-for-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/drivers
Qualcomm driver updates for v5.15
This fixes the "shared memory state machine" (SMSM) interrupt logic to
avoid missing transitions happening while the interrupts are masked.
SM6115 support is added to smd-rpm and rpmpd.
The Qualcomm SCM firmware driver is once again made possible to compile
and load as a kernel module.
An out-of-bounds error related to the cooling devices of the AOSS driver
is corrected. The binding is converted to YAML and a generic compatible
is introduced to reduce the driver churn.
The GENI wrapper gains a helper function used in I2C and SPI for
switching the serial engine hardware to use the wrapper's DMA-engine.
Lastly it contains a number of cleanups and smaller fixes for rpmhpd,
socinfo, CPR, mdt_loader and the GENI DT binding.
* tag 'qcom-drivers-for-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
soc: qcom: smsm: Fix missed interrupts if state changes while masked
soc: qcom: smsm: Implement support for get_irqchip_state
soc: qcom: mdt_loader: be more informative on errors
dt-bindings: qcom: geni-se: document iommus
soc: qcom: smd-rpm: Add SM6115 compatible
soc: qcom: geni: Add support for gpi dma
soc: qcom: geni: move GENI_IF_DISABLE_RO to common header
PM: AVS: qcom-cpr: Use nvmem_cell_read_variable_le_u32()
drivers: soc: qcom: rpmpd: Add SM6115 RPM Power Domains
dt-bindings: power: rpmpd: Add SM6115 to rpmpd binding
dt-bindings: soc: qcom: smd-rpm: Add SM6115 compatible
soc: qcom: aoss: Fix the out of bound usage of cooling_devs
firmware: qcom_scm: Allow qcom_scm driver to be loadable as a permenent module
soc: qcom: socinfo: Don't print anything if nothing found
soc: qcom: rpmhpd: Use corner in power_off
soc: qcom: aoss: Add generic compatible
dt-bindings: soc: qcom: aoss: Convert to YAML
dt-bindings: soc: qcom: aoss: Add SC8180X and generic compatible
firmware: qcom_scm: remove a duplicative condition
firmware: qcom_scm: Mark string array const
Link: https://lore.kernel.org/r/20210816214840.581244-1-bjorn.andersson@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This contains a single fix to stop a slight abuse of the seq_buf API.
-----BEGIN PGP SIGNATURE-----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=A0aA
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=5Ef7
-----END PGP SIGNATURE-----
Merge tag 'tegra-for-5.15-firmware' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/drivers
firmware: tegra: Changes for v5.15-rc1
This contains a single fix to stop a slight abuse of the seq_buf API.
* tag 'tegra-for-5.15-firmware' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
firmware: tegra: Stop using seq_get_buf()
Link: https://lore.kernel.org/r/20210813162157.2820913-2-thierry.reding@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
A batch of fixes for the arm64 stub image loader:
- fix a logic bug that can make the random page allocator fail
spuriously
- force reallocation of the Image when it overlaps with firmware
reserved memory regions
- fix an oversight that defeated on optimization introduced earlier
where images loaded at a suitable offset are never moved if booting
without randomization
- complain about images that were not loaded at the right offset by the
firmware image loader.
-----BEGIN PGP SIGNATURE-----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=oMzy
-----END PGP SIGNATURE-----
Merge tag 'efi_urgent_for_v5.14_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull EFI fixes from Borislav Petkov:
"A batch of fixes for the arm64 stub image loader:
- fix a logic bug that can make the random page allocator fail
spuriously
- force reallocation of the Image when it overlaps with firmware
reserved memory regions
- fix an oversight that defeated on optimization introduced earlier
where images loaded at a suitable offset are never moved if booting
without randomization
- complain about images that were not loaded at the right offset by
the firmware image loader"
* tag 'efi_urgent_for_v5.14_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
efi/libstub: arm64: Double check image alignment at entry
efi/libstub: arm64: Warn when efi_random_alloc() fails
efi/libstub: arm64: Relax 2M alignment again for relocatable kernels
efi/libstub: arm64: Force Image reallocation if BSS was not reserved
arm64: efi: kaslr: Fix occasional random alloc (and boot) failure
The bulk of the addition this time is mainly refactoring to add support
for Virtio transport for SCMI and the addition of the support itself.
The refactoring includes allowing transport specific init/exit calls,
making each transport as compile time configurable, supporting
monotonically increasing tokens instead of using the next available
free buffer index as the token for scmi messages which eases handling
concurrent and out-of-order messages which is a must have for virtio
transport.
Virtio support itself is conformant to the virtio SCMI device spec [1].
Virtio device id 32 has been reserved for the SCMI device [2].
Other than the virtio support, there is one bug fix in the probe failure
clean up path.
[1] https://github.com/oasis-tcs/virtio-spec/blob/master/virtio-scmi.tex
[2] https://www.oasis-open.org/committees/ballot.php?id=3496
-----BEGIN PGP SIGNATURE-----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=CR6R
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=H7PM
-----END PGP SIGNATURE-----
Merge tag 'scmi-updates-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into arm/drivers
SCMI Updates for v5.15
The bulk of the addition this time is mainly refactoring to add support
for Virtio transport for SCMI and the addition of the support itself.
The refactoring includes allowing transport specific init/exit calls,
making each transport as compile time configurable, supporting
monotonically increasing tokens instead of using the next available
free buffer index as the token for scmi messages which eases handling
concurrent and out-of-order messages which is a must have for virtio
transport.
Virtio support itself is conformant to the virtio SCMI device spec [1].
Virtio device id 32 has been reserved for the SCMI device [2].
Other than the virtio support, there is one bug fix in the probe failure
clean up path.
[1] https://github.com/oasis-tcs/virtio-spec/blob/master/virtio-scmi.tex
[2] https://www.oasis-open.org/committees/ballot.php?id=3496
* tag 'scmi-updates-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
firmware: arm_scmi: Use WARN_ON() to check configured transports
firmware: arm_scmi: Fix boolconv.cocci warnings
firmware: arm_scmi: Free mailbox channels if probe fails
firmware: arm_scmi: Add virtio transport
firmware: arm_scmi: Add priv parameter to scmi_rx_callback
dt-bindings: arm: Add virtio transport for SCMI
firmware: arm_scmi: Add optional link_supplier() transport op
firmware: arm_scmi: Add message passing abstractions for transports
firmware: arm_scmi: Add method to override max message number
firmware: arm_scmi: Make shmem support optional for transports
firmware: arm_scmi: Make SCMI transports configurable
firmware: arm_scmi: Make polling mode optional
firmware: arm_scmi: Make .clear_channel optional
firmware: arm_scmi: Handle concurrent and out-of-order messages
firmware: arm_scmi: Introduce monotonically increasing tokens
firmware: arm_scmi: Add optional transport_init/exit support
firmware: arm_scmi: Remove scmi_dump_header_dbg() helper
firmware: arm_scmi: Add support for type handling in common functions
Link: https://lore.kernel.org/r/20210811075743.707961-1-sudeep.holla@arm.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Opencode a copy of mrq_debug_read() in bpmp_debug_show() so that it
can use seq_write() directly instead of poking holes into the seq_file
abstractions using seq_get_buf().
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Tag for other trees/branches to pull from in order to have a stable
place to build off of if they want to add new busses for 5.15.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYPkvsg8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+yl8pwCff+mL/zOaU8M1KwIHrEvNH6LgF58AoKgBAeCb
58Lenmw44ofP5itzU5x3
=J5mO
-----END PGP SIGNATURE-----
Merge tag 'bus_remove_return_void-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core into drm-next
Bus: Make remove callback return void tag
Tag for other trees/branches to pull from in order to have a stable
place to build off of if they want to add new busses for 5.15.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
[airlied: fixed up merge conflict in drm]
From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://patchwork.freedesktop.org/patch/msgid/YPkwQwf0dUKnGA7L@kroah.com
A batch of fixes for the arm64 stub image loader:
- fix a logic bug that can make the random page allocator fail
spuriously
- force reallocation of the Image when it overlaps with firmware
reserved memory regions
- fix an oversight that defeated on optimization introduced earlier
where images loaded at a suitable offset are never moved if booting
without randomization
- complain about images that were not loaded at the right offset by the
firmware image loader.
-----BEGIN PGP SIGNATURE-----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=Shjx
-----END PGP SIGNATURE-----
Merge tag 'efi-urgent-for-v5.14-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi into efi/urgent
Pull EFI fixes from Ard Biesheuvel:
A batch of fixes for the arm64 stub image loader:
- fix a logic bug that can make the random page allocator fail
spuriously
- force reallocation of the Image when it overlaps with firmware
reserved memory regions
- fix an oversight that defeated on optimization introduced earlier
where images loaded at a suitable offset are never moved if booting
without randomization
- complain about images that were not loaded at the right offset by the
firmware image loader.
Link: https://lore.kernel.org/r/20210803091215.2566-1-ardb@kernel.org
Use a WARN_ON() when SCMI stack is loaded to check the consistency of
configured SCMI transports instead of the current compile-time check
BUILD_BUG_ON() to avoid breaking bot-builds on random bad configs.
Bail-out early and noisy during SCMI stack initialization if no transport
was enabled in configuration since SCMI cannot work without at least one
enabled transport and such constraint cannot be enforced in Kconfig due to
circular dependency issues.
Link: https://lore.kernel.org/r/20210809092245.8730-1-cristian.marussi@arm.com
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
We need the fixes in here as well, and resolves some merge issues with
the mhi codebase.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
drivers/firmware/arm_scmi/virtio.c:225:40-45: WARNING: conversion to bool not needed here
Remove unneeded conversion to bool
Semantic patch information:
Relational and logical operators evaluate to bool,
explicit conversion is overly verbose and unneeded.
Generated by: scripts/coccinelle/misc/boolconv.cocci
Link: https://lore.kernel.org/r/20210807173127.GA43248@a24dbc127934
CC: Igor Skalkin <igor.skalkin@opensynergy.com>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: kernel test robot <lkp@intel.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
There are some c&p issues reported by kernel-doc as:
drivers/firmware/xilinx/zynqmp.c:676: warning: expecting prototype for
zynqmp_pm_write_ggs(). Prototype was for zynqmp_pm_read_ggs() instead
drivers/firmware/xilinx/zynqmp.c:710: warning: expecting prototype for
zynqmp_pm_write_pggs(). Prototype was for zynqmp_pm_read_pggs() instead
drivers/firmware/xilinx/zynqmp.c:1023: warning: expecting prototype for
zynqmp_pm_aes(). Prototype was for zynqmp_pm_aes_engine() instead
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Link: https://lore.kernel.org/r/a81edd4fc6cff4bd7e4984fceda941b9e9ab01bf.1628245954.git.michal.simek@xilinx.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
At the moment we probe for the Random Number Generator SMCCC service,
and use that in the core code (arch_get_random). However the hardware
entropy can also be useful to access from userland, and be it to assess
its quality.
Register a platform device when the SMCCC TRNG service is detected, to
allow a hw_random driver to hook onto this.
The function registering the device is deliberately made in a way which
allows expansion, so other services that could be exposed via a platform
device (or some other interface), can be added here easily.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Use %pa to print a physical address.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Maurizio Lombardi <mlombard@redhat.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad@kernel.org>
Mailbox channels for the base protocol are setup during probe.
There can be a scenario where probe fails to acquire the base
protocol due to a timeout leading to cleaning up of all device
managed memory including the scmi_mailbox structure setup during
mailbox_chan_setup function.
| arm-scmi soc:qcom,scmi: timed out in resp(caller: version_get+0x84/0x140)
| arm-scmi soc:qcom,scmi: unable to communicate with SCMI
| arm-scmi: probe of soc:qcom,scmi failed with error -110
Now when a message arrives at cpu slightly after the timeout, the mailbox
controller will try to call the rx_callback of the client and might end
up accessing freed memory.
| rx_callback+0x24/0x160
| mbox_chan_received_data+0x44/0x94
| __handle_irq_event_percpu+0xd4/0x240
This patch frees the mailbox channels setup during probe and adds some more
error handling in case the probe fails.
Link: https://lore.kernel.org/r/1628111999-21595-1-git-send-email-rishabhb@codeaurora.org
Tested-by: Cristian Marussi <cristian.marussi@arm.com>
Reviewed-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Rishabh Bhatnagar <rishabhb@codeaurora.org>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
This transport enables communications with an SCMI platform through virtio;
the SCMI platform will be represented by a virtio device.
Implement an SCMI virtio driver according to the virtio SCMI device spec
[1]. Virtio device id 32 has been reserved for the SCMI device [2].
The virtio transport has one Tx channel (virtio cmdq, A2P channel) and
at most one Rx channel (virtio eventq, P2A channel).
The following feature bit defined in [1] is not implemented:
VIRTIO_SCMI_F_SHARED_MEMORY.
The number of messages which can be pending simultaneously is restricted
according to the virtqueue capacity negotiated at probing time.
As soon as Rx channel message buffers are allocated or have been read
out by the arm-scmi driver, feed them back to the virtio device.
Since some virtio devices may not have the short response time exhibited
by SCMI platforms using other transports, set a generous response
timeout.
SCMI polling mode is not supported by this virtio transport since deemed
meaningless: polling mode operation is offered by the SCMI core to those
transports that could not provide a completion interrupt on the TX path,
which is never the case for virtio whose core callbacks can easily call
into core scmi_rx_callback upon messages reception.
[1] https://github.com/oasis-tcs/virtio-spec/blob/master/virtio-scmi.tex
[2] https://www.oasis-open.org/committees/ballot.php?id=3496
Link: https://lore.kernel.org/r/20210803131024.40280-16-cristian.marussi@arm.com
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Co-developed-by: Peter Hilber <peter.hilber@opensynergy.com>
Co-developed-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Igor Skalkin <igor.skalkin@opensynergy.com>
[ Peter: Adapted patch for submission to upstream. ]
Signed-off-by: Peter Hilber <peter.hilber@opensynergy.com>
[ Cristian: simplified driver logic, changed link_supplier and channel
available/setup logic, removed dummy callbacks ]
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Add a new opaque void *priv parameter to scmi_rx_callback which can be
optionally provided by the transport layer when invoking scmi_rx_callback
and that will be passed back to the transport layer in xfer->priv.
This can be used by transports that needs to keep track of their specific
data structures together with the valid xfers.
Link: https://lore.kernel.org/r/20210803131024.40280-15-cristian.marussi@arm.com
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Some transports are also effectively registered with other kernel subsystem
in order to be properly probed and initialized; as a consequence such kind
of transports, and their related devices, might still not have been probed
and initialized at the time the main SCMI core driver is probed.
Add an optional .link_supplier() transport operation which can be used by
the core SCMI stack to dynamically check if the transport is ready and
dynamically link its device to the SCMI platform instance device.
Link: https://lore.kernel.org/r/20210803131024.40280-13-cristian.marussi@arm.com
Signed-off-by: Peter Hilber <peter.hilber@opensynergy.com>
[ Cristian: reworded commit message ]
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Add abstractions for future transports using message passing, such as
virtio. Derive the abstractions from the shared memory abstractions.
Abstract the transport SDU through the opaque struct scmi_msg_payld.
Also enable the transport to determine all other required information
about the transport SDU.
Link: https://lore.kernel.org/r/20210803131024.40280-12-cristian.marussi@arm.com
Signed-off-by: Peter Hilber <peter.hilber@opensynergy.com>
[ Cristian: Adapted to new SCMI Kconfig layout, updated Copyrights ]
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
The maximum number of simultaneously pending messages is a transport
specific quantity that is usually described statically in struct scmi_desc.
Some transports, though, can calculate such number only at run-time after
some initial transport specific setup and probing is completed; moreover
the resulting max message numbers could also be different between rx and
tx channels.
Add an optional get_max_msg() operation so that a transport can report more
accurate max message numbers for each channel type.
The value in scmi_desc.max_msg is still used as default when transport does
not provide any get_max_msg() method.
Link: https://lore.kernel.org/r/20210803131024.40280-11-cristian.marussi@arm.com
Co-developed-by: Peter Hilber <peter.hilber@opensynergy.com>
Co-developed-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Igor Skalkin <igor.skalkin@opensynergy.com>
[ Peter: Adapted patch for submission to upstream. ]
Signed-off-by: Peter Hilber <peter.hilber@opensynergy.com>
[ Cristian: refactored how get_max_msg() is used to minimize core changes ]
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Upcoming new SCMI transports won't need any kind of shared memory support.
Compile shmem.c only if a shmem based transport is selected.
Link: https://lore.kernel.org/r/20210803131024.40280-10-cristian.marussi@arm.com
Co-developed-by: Peter Hilber <peter.hilber@opensynergy.com>
Signed-off-by: Igor Skalkin <igor.skalkin@opensynergy.com>
[ Peter: Adapted patch for submission to upstream. ]
Signed-off-by: Peter Hilber <peter.hilber@opensynergy.com>
[ Cristian: Adapted patch/commit_msg to new SCMI Kconfig layout ]
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Add configuration options to be able to select which SCMI transports have
to be compiled into the SCMI stack.
Mailbox and SMC are by default enabled if their related dependencies are
satisfied.
While doing that move all SCMI related config options in their own
dedicated submenu.
Link: https://lore.kernel.org/r/20210803131024.40280-9-cristian.marussi@arm.com
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Add a check for the presence of .poll_done transport operation so that
transports that do not need to support polling mode have no need to provide
a dummy .poll_done callback either and polling mode can be disabled in the
SCMI core for that tranport.
Link: https://lore.kernel.org/r/20210803131024.40280-8-cristian.marussi@arm.com
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Make transport operation .clear_channel optional since some transports
do not need it and so avoid to have them implement dummy callbacks.
Link: https://lore.kernel.org/r/20210803131024.40280-7-cristian.marussi@arm.com
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Even though in case of asynchronous commands an SCMI platform is
constrained to emit the delayed response message only after the related
message response has been sent, the configured underlying transport could
still deliver such messages together or in inverted order, causing races
due to the concurrent or out-of-order access to the underlying xfer.
Introduce a mechanism to grant exclusive access to an xfer in order to
properly serialize concurrent accesses to the same xfer originating from
multiple correlated messages.
Add additional state information to xfer descriptors so as to be able to
identify out-of-order message deliveries and act accordingly:
- when a delayed response is expected but delivered before the related
response, the synchronous response is considered as successfully
received and the delayed response processing is carried on as usual.
- when/if the missing synchronous response is subsequently received, it
is discarded as not congruent with the current state of the xfer, or
simply, because the xfer has been already released and so, now, the
monotonically increasing sequence number carried by the late response
is stale.
Link: https://lore.kernel.org/r/20210803131024.40280-6-cristian.marussi@arm.com
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Tokens are sequence numbers embedded in the each SCMI message header: they
are used to correlate commands with responses (and delayed responses), but
their usage and policy of selection is entirely up to the caller (usually
the OSPM agent), while they are completely opaque to the callee (i.e. SCMI
platform) which merely copies them back from the command into the response
message header.
This also means that the platform does not, can not and should not enforce
any kind of policy on received messages depending on the contained sequence
number: platform can perfectly handle concurrent requests carrying the same
identifiying token if that should happen.
Moreover the platform is not required to produce in-order responses to
agent requests, the only constraint in these regards is that in case of
an asynchronous message the delayed response must be sent after the
immediate response for the synchronous part of the command transaction.
Currenly the SCMI stack of the OSPM agent selects a token for the egressing
commands picking the lowest possible number which is not already in use by
an existing in-flight transaction, which means, in other words, that we
immediately reuse any token after its transaction has completed or it has
timed out: this policy indeed does simplify management and lookup of tokens
and associated xfers.
Under the above assumptions and constraints, since there is really no state
shared between the agent and the platform to let the platform know when a
token and its associated message has timed out, the current policy of early
reuse of tokens can easily lead to the situation in which a spurious or
late received response (or delayed_response), related to an old stale and
timed out transaction, can be wrongly associated to a newer valid in-flight
xfer that just happens to have reused the same token.
This misbehaviour on such late/spurious responses is more easily exposed on
those transports that naturally have an higher level of parallelism in
processing multiple concurrent in-flight messages.
This commit introduces a new policy of selection of tokens for the OSPM
agent: each new command transfer now gets the next available, monotonically
increasing token, until tokens are exhausted and the counter rolls over.
Such new policy mitigates the above issues with late/spurious responses
since the tokens are now reused as late as possible (when they roll back
ideally) and so it is much easier to identify such late/spurious responses
to stale timed out transactions: this also helps in simplifying the
specific transports implementation since stale transport messages can be
easily identified and discarded early on in the rx path without the need
to cross check their actual state with the core transport layer.
This mitigation is even more effective when, as is usually the case, the
maximum number of pending messages is capped by the platform to a much
lower number than the whole possible range of tokens values (2^10).
This internal policy change in the core SCMI transport layer is fully
transparent to the specific transports so it has not and should not have
any impact on the transports implementation.
Link: https://lore.kernel.org/r/20210803131024.40280-5-cristian.marussi@arm.com
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Some SCMI transport could need to perform some transport specific setup
before they can be used by the SCMI core transport layer: typically this
early setup consists in registering with some other kernel subsystem.
Add the optional capability for a transport to provide a couple of init
and exit functions that are assured to be called early during the SCMI
core initialization phase, well before the SCMI core probing step.
[ Peter: Adapted RFC patch by Cristian for submission to upstream. ]
Link: https://lore.kernel.org/r/20210803131024.40280-4-cristian.marussi@arm.com
Signed-off-by: Peter Hilber <peter.hilber@opensynergy.com>
[ Cristian: Fixed scmi_transports_exit point of invocation ]
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Being a while that we have SCMI trace events in the SCMI stack, remove
this debug helper and its call sites.
Link: https://lore.kernel.org/r/20210803131024.40280-3-cristian.marussi@arm.com
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
On arm64, the stub only moves the kernel image around in memory if
needed, which is typically only for KASLR, given that relocatable
kernels (which is the default) can run from any 64k aligned address,
which is also the minimum alignment communicated to EFI via the PE/COFF
header.
Unfortunately, some loaders appear to ignore this header, and load the
kernel at some arbitrary offset in memory. We can deal with this, but
let's check for this condition anyway, so non-compliant code can be
spotted and fixed.
Cc: <stable@vger.kernel.org> # v5.10+
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Tested-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Randomization of the physical load address of the kernel image relies on
efi_random_alloc() returning successfully, and currently, we ignore any
failures and just carry on, using the ordinary, non-randomized page
allocator routine. This means we never find out if a failure occurs,
which could harm security, so let's at least warn about this condition.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Tested-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
