IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Merge series from Hui Wang <hui.wang@canonical.com>:
Taking your advice and try to enable internal PLL to get a more
accurate sample rate. And I also changed the fsl-asoc-card.c to support
the nau8822 codec, now the sound quality is pretty good on my imx6sx
EVB.
When we configure the PLL record the input and output frequency, then if we
get asked to configure the same values again just skip reprogramming the
hardware. This makes things a bit easier to use for machine drivers since
it means they don't need to keep track of if they've programmed the PLL
so much.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220603103530.3844527-1-broonie@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
After finishing the playback or recording, the machine driver might
call snd_soc_dai_set_pll(codec, pll_id, 0, 0, 0) to stop the internal
PLL, but with the codec driver nau8822, it will print error as below:
nau8822 0-001a: Unsupported input clock 0
fsl-asoc-card sound-nau8822: failed to stop FLL: -22
Refer to the function wm8962_set_fll() in the codec driver wm8962, if
the freq_out is zero, turn off the internal PLL and return 0.
Cc: David Lin <ctlin0@nuvoton.com>
Cc: John Hsu <kchsu0@nuvoton.com>
Cc: Seven Li <wtli@nuvoton.com>
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Link: https://lore.kernel.org/r/20220530040151.95221-3-hui.wang@canonical.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We tried to enable the audio on an imx6sx EVB with the codec nau8822,
after setting the internal PLL fractional parameters, the audio still
couldn't work and the there was no sdma irq at all.
After checking with the section "8.1.1 Phase Locked Loop (PLL) Design
Example" of "NAU88C22 Datasheet Rev 0.6", we found we need to
turn off the PLL before programming fractional parameters and turn on
the PLL after programming.
After this change, the audio driver could record and play sound and
the sdma's irq is triggered when playing or recording.
Cc: David Lin <ctlin0@nuvoton.com>
Cc: John Hsu <kchsu0@nuvoton.com>
Cc: Seven Li <wtli@nuvoton.com>
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Link: https://lore.kernel.org/r/20220530040151.95221-2-hui.wang@canonical.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The i2c probe functions here don't use the id information provided in
their second argument, so the single-parameter i2c probe function
("probe_new") can be used instead.
This avoids scanning the identifier tables during probes.
Signed-off-by: Stephen Kitt <steve@sk2.org>
Link: https://lore.kernel.org/r/20220405165836.2165310-8-steve@sk2.org
Signed-off-by: Mark Brown <broonie@kernel.org>
snd_soc_dai_digital_mute() is internally using both
mute_stream() (1) or digital_mute() (2), but the difference between
these 2 are only handling direction.
We can merge digital_mute() into mute_stream
int snd_soc_dai_digital_mute(xxx, int direction)
{
...
else if (dai->driver->ops->mute_stream)
(1) return dai->driver->ops->mute_stream(xxx, direction);
else if (direction == SNDRV_PCM_STREAM_PLAYBACK &&
dai->driver->ops->digital_mute)
(2) return dai->driver->ops->digital_mute(xxx);
...
}
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Link: https://lore.kernel.org/r/875zaxxxi4.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We need to use snd_soc_component_read()
instead of snd_soc_component_read32()
This patch renames _read32() to _read()
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87mu534me5.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We had read/write function for Codec, Platform, etc,
but these has been merged into snd_soc_component_read/write().
Internally, it is using regmap or driver function.
In read case, each styles are like below
regmap
ret = regmap_read(..., reg, &val);
driver function
val = xxx->read(..., reg);
Because of this kind of different style, to keep same read style,
when we merged each read function into snd_soc_component_read(),
we created snd_soc_component_read32(), like below.
commit 738b49efe6 ("ASoC: add snd_soc_component_read32")
(1) val = snd_soc_component_read32(component, reg);
(2) ret = snd_soc_component_read(component, reg, &val);
Many drivers are using snd_soc_component_read32(), and
some drivers are using snd_soc_component_read() today.
In generally, we don't check read function successes,
because, we will have many other issues at initial timing
if read function didn't work.
Now we can use soc_component_err() when error case.
This means, it is easy to notice if error occurred.
This patch aggressively merge snd_soc_component_read() and _read32(),
and makes snd_soc_component_read/write() as generally style.
This patch do
1) merge snd_soc_component_read() and snd_soc_component_read32()
2) it uses soc_component_err() when error case (easy to notice)
3) keeps read32 for now by #define
4) update snd_soc_component_read() for all drivers
Because _read() user drivers are not too many, this patch changes
all user drivers.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/87sgev4mfl.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The driver selects the proper BCLK divide through the BCLK and FS
at the hardware parameter when the I2S master mode.
Signed-off-by: David Lin <CTLIN0@nuvoton.com>
Signed-off-by: John Hsu <KCHSU0@nuvoton.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch updates license to SPDX-License-Identifier
instead of verbose license text.
Signed-off-by: David Lin <CTLIN0@nuvoton.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
