40339 Commits
Author | SHA1 | Message | Date | |
---|---|---|---|---|
Valentin Schneider
|
585463f0d5 |
sched/core: Merge cpumask_andnot()+for_each_cpu() into for_each_cpu_andnot()
This removes the second use of the sched_core_mask temporary mask. Suggested-by: Yury Norov <yury.norov@gmail.com> Signed-off-by: Valentin Schneider <vschneid@redhat.com> |
||
Steven Rostedt (Google)
|
a541a9559b |
tracing: Do not free snapshot if tracer is on cmdline
The ftrace_boot_snapshot and alloc_snapshot cmdline options allocate the snapshot buffer at boot up for use later. The ftrace_boot_snapshot in particular requires the snapshot to be allocated because it will take a snapshot at the end of boot up allowing to see the traces that happened during boot so that it's not lost when user space takes over. When a tracer is registered (started) there's a path that checks if it requires the snapshot buffer or not, and if it does not and it was allocated it will do a synchronization and free the snapshot buffer. This is only required if the previous tracer was using it for "max latency" snapshots, as it needs to make sure all max snapshots are complete before freeing. But this is only needed if the previous tracer was using the snapshot buffer for latency (like irqoff tracer and friends). But it does not make sense to free it, if the previous tracer was not using it, and the snapshot was allocated by the cmdline parameters. This basically takes away the point of allocating it in the first place! Note, the allocated snapshot worked fine for just trace events, but fails when a tracer is enabled on the cmdline. Further investigation, this goes back even further and it does not require a tracer on the cmdline to fail. Simply enable snapshots and then enable a tracer, and it will remove the snapshot. Link: https://lkml.kernel.org/r/20221005113757.041df7fe@gandalf.local.home Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: stable@vger.kernel.org Fixes: 45ad21ca5530 ("tracing: Have trace_array keep track if snapshot buffer is allocated") Reported-by: Ross Zwisler <zwisler@kernel.org> Tested-by: Ross Zwisler <zwisler@kernel.org> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> |
||
Steven Rostedt (Google)
|
cf04f2d5df |
ftrace: Still disable enabled records marked as disabled
Weak functions started causing havoc as they showed up in the "available_filter_functions" and this confused people as to why some functions marked as "notrace" were listed, but when enabled they did nothing. This was because weak functions can still have fentry calls, and these addresses get added to the "available_filter_functions" file. kallsyms is what converts those addresses to names, and since the weak functions are not listed in kallsyms, it would just pick the function before that. To solve this, there was a trick to detect weak functions listed, and these records would be marked as DISABLED so that they do not get enabled and are mostly ignored. As the processing of the list of all functions to figure out what is weak or not can take a long time, this process is put off into a kernel thread and run in parallel with the rest of start up. Now the issue happens whet function tracing is enabled via the kernel command line. As it starts very early in boot up, it can be enabled before the records that are weak are marked to be disabled. This causes an issue in the accounting, as the weak records are enabled by the command line function tracing, but after boot up, they are not disabled. The ftrace records have several accounting flags and a ref count. The DISABLED flag is just one. If the record is enabled before it is marked DISABLED it will get an ENABLED flag and also have its ref counter incremented. After it is marked for DISABLED, neither the ENABLED flag nor the ref counter is cleared. There's sanity checks on the records that are performed after an ftrace function is registered or unregistered, and this detected that there were records marked as ENABLED with ref counter that should not have been. Note, the module loading code uses the DISABLED flag as well to keep its functions from being modified while its being loaded and some of these flags may get set in this process. So changing the verification code to ignore DISABLED records is a no go, as it still needs to verify that the module records are working too. Also, the weak functions still are calling a trampoline. Even though they should never be called, it is dangerous to leave these weak functions calling a trampoline that is freed, so they should still be set back to nops. There's two places that need to not skip records that have the ENABLED and the DISABLED flags set. That is where the ftrace_ops is processed and sets the records ref counts, and then later when the function itself is to be updated, and the ENABLED flag gets removed. Add a helper function "skip_record()" that returns true if the record has the DISABLED flag set but not the ENABLED flag. Link: https://lkml.kernel.org/r/20221005003809.27d2b97b@gandalf.local.home Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: stable@vger.kernel.org Fixes: b39181f7c6907 ("ftrace: Add FTRACE_MCOUNT_MAX_OFFSET to avoid adding weak function") Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> |
||
Linus Torvalds
|
7fb68b6c82 |
platform-drivers-x86 for v6.1-1
Highlights: - AMD Platform Management Framework (PMF) driver with AMT and QnQF support - AMD PMC: Improved logging for debugging s2idle issues - Big refactor of the ACPI/x86 backlight handling, ensuring that we only register 1 /sys/class/backlight device per LCD panel - Microsoft Surface: - Surface Laptop Go 2 support - Surface Pro 8 HID sensor support - Asus WMI: - Lots of cleanups - Support for TUF RGB keyboard backlight control - Add support for ROG X13 tablet mode - Siemens Simatic: IPC227G and IPC427G support - Toshiba ACPI laptop driver: Fan hwmon and battery ECO mode support - tools/power/x86/intel-speed-select: Various improvements - Various cleanups - Various small bugfixes The following is an automated git shortlog grouped by driver: ACPI: - video: Change disable_backlight_sysfs_if quirks to acpi_backlight=native - s2idle: Add a new ->check() callback for platform_s2idle_ops - video: Fix indentation of video_detect_dmi_table[] entries - video: Drop NL5x?U, PF4NU1F and PF5?U?? acpi_backlight=native quirks - video: Drop "Samsung X360" acpi_backlight=native quirk - video: Remove acpi_video_set_dmi_backlight_type() - video: Add Apple GMUX brightness control detection - video: Add Nvidia WMI EC brightness control detection (v3) - video: Refactor acpi_video_get_backlight_type() a bit - video: Remove code to unregister acpi_video backlight when a native backlight registers - video: Make backlight class device registration a separate step (v2) - video: Simplify acpi_video_unregister_backlight() - video: Remove acpi_video_bus from list before tearing it down - video: Drop backlight_device_get_by_type() call from acpi_video_get_backlight_type() - video: Add acpi_video_backlight_use_native() helper acer-wmi: - Move backlight DMI quirks to acpi/video_detect.c - Acer Aspire One AOD270/Packard Bell Dot keymap fixes apple-gmux: - Stop calling acpi/video.h functions asus-wmi: - Expand support of GPU fan to read RPM and label - Make kbd_rgb_mode_groups static - Move acpi_backlight=native quirks to ACPI video_detect.c - Move acpi_backlight=vendor quirks to ACPI video_detect.c - Drop DMI chassis-type check from backlight handling - Increase FAN_CURVE_BUF_LEN to 32 - Fix the name of the mic-mute LED classdev - Implement TUF laptop keyboard power states - Implement TUF laptop keyboard LED modes - Support the GPU fan on TUF laptops - Modify behaviour of Fn+F5 fan key - Update tablet_mode_sw module-param help text - Simplify tablet-mode-switch handling - Simplify tablet-mode-switch probing - Add support for ROG X13 tablet mode - Adjust tablet/lidflip handling to use enum - Support the hardware GPU MUX on some laptops - Simplify some of the *_check_present() helpers - Refactor panel_od attribute - Refactor egpu_enable attribute - Refactor disable_gpu attribute - Document the panel_od sysfs attribute - Document the egpu_enable sysfs attribute - Document the dgpu_disable sysfs attribute - Use kobj_to_dev() - Convert all attr-show to use sysfs_emit compal-laptop: - Get rid of a few forward declarations dell-privacy: - convert to use dev_groups dell-smbios-base: - Use sysfs_emit() dell-wmi: - Add WMI event 0x0012 0x0003 to the list docs: - ABI: charge_control_end_threshold may not support all values drivers/platform: - toshiba_acpi: Call HCI_PANEL_POWER_ON on resume on some models drm/amdgpu: - Register ACPI video backlight when skipping amdgpu backlight registration - Don't register backlight when another backlight should be used (v3) drm/i915: - Call acpi_video_register_backlight() (v3) - Don't register backlight when another backlight should be used (v2) drm/nouveau: - Register ACPI video backlight when nv_backlight registration fails (v2) - Don't register backlight when another backlight should be used (v2) drm/radeon: - Register ACPI video backlight when skipping radeon backlight registration - Don't register backlight when another backlight should be used (v3) drm/todo: - Add entry about dealing with brightness control on devices with > 1 panel gpio-f7188x: - use unique labels for banks/chips - Add GPIO support for Nuvoton NCT6116 - add a prefix to macros to keep gpio namespace clean - switch over to using pr_fmt hp-wmi: - Support touchpad on/off - Setting thermal profile fails with 0x06 int3472/discrete: - Drop a forward declaration intel-uncore-freq: - Use sysfs_emit() to instead of scnprintf() intel_cht_int33fe: - Fix comment according to the code flow leds: - simatic-ipc-leds-gpio: Make simatic_ipc_led_gpio_table static - simatic-ipc-leds-gpio: add new model 227G move from strlcpy with unused retval to strscpy: - move from strlcpy with unused retval to strscpy msi-laptop: - Change DMI match / alias strings to fix module autoloading - Add msi_scm_disable_hw_fn_handling() helper - Add msi_scm_model_exit() helper - Fix resource cleanup - Simplify ec_delay handling - Fix old-ec check for backlight registering - Drop MSI_DRIVER_VERSION - Use MODULE_DEVICE_TABLE() nvidia-wmi-ec-backlight: - Use acpi_video_get_backlight_type() - Move fw interface definitions to a header (v2) p2sb: - Fix UAF when caller uses resource name platform/mellanox: - mlxreg-lc: Make error handling flow consistent - Remove redundant 'NULL' check - Remove unnecessary code - mlxreg-lc: Fix locking issue - mlxreg-lc: Fix coverity warning platform/surface: - Split memcpy() of struct ssam_event flexible array - aggregator_registry: Add HID devices for sensors and UCSI client to SP8 - aggregator_registry: Rename HID device nodes based on new findings - aggregator_registry: Rename HID device nodes based on their function - aggregator_registry: Add support for Surface Laptop Go 2 platform/x86: - use PLATFORM_DEVID_NONE instead of -1 platform/x86/amd: - pmc: Dump idle mask during "check" stage instead - pmc: remove CONFIG_DEBUG_FS checks - pmc: Fix build without debugfs - pmc: Add sysfs files for SMU - pmc: Add an extra STB message for checking s2idle entry - pmc: Always write to the STB - pmc: Add defines for STB events platform/x86/amd/pmf: - Remove unused power_delta instances - install notify handler after acpi init - Add sysfs to toggle CnQF - Add support for CnQF - Fix clang unused variable warning - Fix undefined reference to platform_profile - Force load driver on older supported platforms - Handle AMT and CQL events for Auto mode - Add support for Auto mode feature - Get performance metrics from PMFW - Add fan control support - Add heartbeat signal support - Add debugfs information - Add support SPS PMF feature - Add support for PMF APCI layer - Add support for PMF core layer - Add ABI doc for AMD PMF - Add AMD PMF driver entry platform/x86/intel/wmi: - thunderbolt: Use dev_groups callback pmc_atom: - Amend comment style and grammar - Make terminator entry uniform - Improve quirk message to be less cryptic - Fix SLP_TYPx bitfield mask samsung-laptop: - Move acpi_backlight=[vendor|native] quirks to ACPI video_detect.c simatic-ipc: - add new model 427G - enable watchdog for 227G thinkpad_acpi: - Explicitly set to balanced mode on startup tools/power/x86/intel-speed-select: - Release v1.13 - Optimize CPU initialization - Utilize cpu_map to get physical id - Remove unused struct clos_config fields - Enforce isst_id value - Do not export get_physical_id - Introduce is_cpu_in_power_domain helper - Cleanup get_physical_id usage - Convert more function to use isst_id - Add pkg and die in isst_id - Introduce struct isst_id - Remove unused core_mask array - Remove dead code - Fix cpu count for TDP level display toshiba_acpi: - change turn_on_panel_on_resume to static - Remove duplicate include - Set correct parent for input device. - Add fan RPM reading (hwmon interface) - Add fan RPM reading (internals) - Stop using acpi_video_set_dmi_backlight_type() - Fix ECO LED control on Toshiba Z830 - Battery charge mode in toshiba_acpi (internals) - Battery charge mode in toshiba_acpi (sysfs) wmi: - Drop forward declaration of static functions - Allow duplicate GUIDs for drivers that use struct wmi_driver x86-android-tablets: - Fix broken touchscreen on Chuwi Hi8 with Windows BIOS -----BEGIN PGP SIGNATURE----- iQFIBAABCAAyFiEEuvA7XScYQRpenhd+kuxHeUQDJ9wFAmM9eLgUHGhkZWdvZWRl QHJlZGhhdC5jb20ACgkQkuxHeUQDJ9zIzAf+JG058wucK0Zsnu4POzGp+uHjnWuu AJUmTeRvCD7MidwIv5PiwEtTucQ8OuXYR+tPc8LIwCVZtc05FBmh7Y8le/CX0SS6 n9EZIvCk3Owosti5w2TPnCK920kh+Wfxl/fmfDbpi6+lpAL8r+F/mZEGKGFdZpWu Q+yM/eyxwPH8q8gjrXOUC7rN43aYeO3OCpNG3GYkQ/2S5qrjuz39dXhNVzdSsxm7 aYOqJRNjZQEjQ3kJcp65kC6oWp3UaI1zdpGwhBG/SY8BCtCYZzlRy7gN2FCJfAa/ EyYayOvdy0zNwewbIYzck4W80hUDtfidgZgZ9crQscO/JjbGi6LhveD4YA== =afGw -----END PGP SIGNATURE----- Merge tag 'platform-drivers-x86-v6.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86 Pull x86 platform driver updates from Hans de Goede: - AMD Platform Management Framework (PMF) driver with AMT and QnQF support - AMD PMC: Improved logging for debugging s2idle issues - Big refactor of the ACPI/x86 backlight handling, ensuring that we only register 1 /sys/class/backlight device per LCD panel - Microsoft Surface: - Surface Laptop Go 2 support - Surface Pro 8 HID sensor support - Asus WMI: - Lots of cleanups - Support for TUF RGB keyboard backlight control - Add support for ROG X13 tablet mode - Siemens Simatic: IPC227G and IPC427G support - Toshiba ACPI laptop driver: Fan hwmon and battery ECO mode support - tools/power/x86/intel-speed-select: Various improvements - Various cleanups - Various small bugfixes * tag 'platform-drivers-x86-v6.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (153 commits) platform/x86: use PLATFORM_DEVID_NONE instead of -1 platform/x86/amd: pmc: Dump idle mask during "check" stage instead platform/x86/intel/wmi: thunderbolt: Use dev_groups callback platform/x86/amd: pmc: remove CONFIG_DEBUG_FS checks platform/surface: Split memcpy() of struct ssam_event flexible array platform/x86: compal-laptop: Get rid of a few forward declarations platform/x86: intel-uncore-freq: Use sysfs_emit() to instead of scnprintf() platform/x86: dell-smbios-base: Use sysfs_emit() platform/x86/amd/pmf: Remove unused power_delta instances platform/x86/amd/pmf: install notify handler after acpi init Documentation/ABI/testing/sysfs-amd-pmf: Add ABI doc for AMD PMF platform/x86/amd/pmf: Add sysfs to toggle CnQF platform/x86/amd/pmf: Add support for CnQF platform/x86/amd: pmc: Fix build without debugfs platform/x86: hp-wmi: Support touchpad on/off platform/x86: int3472/discrete: Drop a forward declaration platform/x86: toshiba_acpi: change turn_on_panel_on_resume to static platform/x86: wmi: Drop forward declaration of static functions platform/x86: toshiba_acpi: Remove duplicate include platform/x86: msi-laptop: Change DMI match / alias strings to fix module autoloading ... |
||
Petr Mladek
|
59b2a38c6a | Merge branch 'for-6.1/sysfs-patched-object' into for-linus | ||
Linus Torvalds
|
0326074ff4 |
Networking changes for 6.1.
Core ---- - Introduce and use a single page frag cache for allocating small skb heads, clawing back the 10-20% performance regression in UDP flood test from previous fixes. - Run packets which already went thru HW coalescing thru SW GRO. This significantly improves TCP segment coalescing and simplifies deployments as different workloads benefit from HW or SW GRO. - Shrink the size of the base zero-copy send structure. - Move TCP init under a new slow / sleepable version of DO_ONCE(). BPF --- - Add BPF-specific, any-context-safe memory allocator. - Add helpers/kfuncs for PKCS#7 signature verification from BPF programs. - Define a new map type and related helpers for user space -> kernel communication over a ring buffer (BPF_MAP_TYPE_USER_RINGBUF). - Allow targeting BPF iterators to loop through resources of one task/thread. - Add ability to call selected destructive functions. Expose crash_kexec() to allow BPF to trigger a kernel dump. Use CAP_SYS_BOOT check on the loading process to judge permissions. - Enable BPF to collect custom hierarchical cgroup stats efficiently by integrating with the rstat framework. - Support struct arguments for trampoline based programs. Only structs with size <= 16B and x86 are supported. - Invoke cgroup/connect{4,6} programs for unprivileged ICMP ping sockets (instead of just TCP and UDP sockets). - Add a helper for accessing CLOCK_TAI for time sensitive network related programs. - Support accessing network tunnel metadata's flags. - Make TCP SYN ACK RTO tunable by BPF programs with TCP Fast Open. - Add support for writing to Netfilter's nf_conn:mark. Protocols --------- - WiFi: more Extremely High Throughput (EHT) and Multi-Link Operation (MLO) work (802.11be, WiFi 7). - vsock: improve support for SO_RCVLOWAT. - SMC: support SO_REUSEPORT. - Netlink: define and document how to use netlink in a "modern" way. Support reporting missing attributes via extended ACK. - IPSec: support collect metadata mode for xfrm interfaces. - TCPv6: send consistent autoflowlabel in SYN_RECV state and RST packets. - TCP: introduce optional per-netns connection hash table to allow better isolation between namespaces (opt-in, at the cost of memory and cache pressure). - MPTCP: support TCP_FASTOPEN_CONNECT. - Add NEXT-C-SID support in Segment Routing (SRv6) End behavior. - Adjust IP_UNICAST_IF sockopt behavior for connected UDP sockets. - Open vSwitch: - Allow specifying ifindex of new interfaces. - Allow conntrack and metering in non-initial user namespace. - TLS: support the Korean ARIA-GCM crypto algorithm. - Remove DECnet support. Driver API ---------- - Allow selecting the conduit interface used by each port in DSA switches, at runtime. - Ethernet Power Sourcing Equipment and Power Device support. - Add tc-taprio support for queueMaxSDU parameter, i.e. setting per traffic class max frame size for time-based packet schedules. - Support PHY rate matching - adapting between differing host-side and link-side speeds. - Introduce QUSGMII PHY mode and 1000BASE-KX interface mode. - Validate OF (device tree) nodes for DSA shared ports; make phylink-related properties mandatory on DSA and CPU ports. Enforcing more uniformity should allow transitioning to phylink. - Require that flash component name used during update matches one of the components for which version is reported by info_get(). - Remove "weight" argument from driver-facing NAPI API as much as possible. It's one of those magic knobs which seemed like a good idea at the time but is too indirect to use in practice. - Support offload of TLS connections with 256 bit keys. New hardware / drivers ---------------------- - Ethernet: - Microchip KSZ9896 6-port Gigabit Ethernet Switch - Renesas Ethernet AVB (EtherAVB-IF) Gen4 SoCs - Analog Devices ADIN1110 and ADIN2111 industrial single pair Ethernet (10BASE-T1L) MAC+PHY. - Rockchip RV1126 Gigabit Ethernet (a version of stmmac IP). - Ethernet SFPs / modules: - RollBall / Hilink / Turris 10G copper SFPs - HALNy GPON module - WiFi: - CYW43439 SDIO chipset (brcmfmac) - CYW89459 PCIe chipset (brcmfmac) - BCM4378 on Apple platforms (brcmfmac) Drivers ------- - CAN: - gs_usb: HW timestamp support - Ethernet PHYs: - lan8814: cable diagnostics - Ethernet NICs: - Intel (100G): - implement control of FCS/CRC stripping - port splitting via devlink - L2TPv3 filtering offload - nVidia/Mellanox: - tunnel offload for sub-functions - MACSec offload, w/ Extended packet number and replay window offload - significantly restructure, and optimize the AF_XDP support, align the behavior with other vendors - Huawei: - configuring DSCP map for traffic class selection - querying standard FEC statistics - querying SerDes lane number via ethtool - Marvell/Cavium: - egress priority flow control - MACSec offload - AMD/SolarFlare: - PTP over IPv6 and raw Ethernet - small / embedded: - ax88772: convert to phylink (to support SFP cages) - altera: tse: convert to phylink - ftgmac100: support fixed link - enetc: standard Ethtool counters - macb: ZynqMP SGMII dynamic configuration support - tsnep: support multi-queue and use page pool - lan743x: Rx IP & TCP checksum offload - igc: add xdp frags support to ndo_xdp_xmit - Ethernet high-speed switches: - Marvell (prestera): - support SPAN port features (traffic mirroring) - nexthop object offloading - Microchip (sparx5): - multicast forwarding offload - QoS queuing offload (tc-mqprio, tc-tbf, tc-ets) - Ethernet embedded switches: - Marvell (mv88e6xxx): - support RGMII cmode - NXP (felix): - standardized ethtool counters - Microchip (lan966x): - QoS queuing offload (tc-mqprio, tc-tbf, tc-cbs, tc-ets) - traffic policing and mirroring - link aggregation / bonding offload - QUSGMII PHY mode support - Qualcomm 802.11ax WiFi (ath11k): - cold boot calibration support on WCN6750 - support to connect to a non-transmit MBSSID AP profile - enable remain-on-channel support on WCN6750 - Wake-on-WLAN support for WCN6750 - support to provide transmit power from firmware via nl80211 - support to get power save duration for each client - spectral scan support for 160 MHz - MediaTek WiFi (mt76): - WiFi-to-Ethernet bridging offload for MT7986 chips - RealTek WiFi (rtw89): - P2P support Signed-off-by: Jakub Kicinski <kuba@kernel.org> -----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEE6jPA+I1ugmIBA4hXMUZtbf5SIrsFAmM7vtkACgkQMUZtbf5S Irvotg//dmh53rC+UMKO3OgOqPlSMnaqzbUdDEfN6mj4Mpox7Csb8zERVURHhBHY fvlXWsDgxmvgTebI5fvNC5+f1iW5xcqgJV2TWnNmDOKWwvQwb6qQfgixVmunvkpe IIukMXYt0dAf9bXeeEfbNXcCb85cPwB76stX0tMV6BX7osp3T0TL1fvFk0NJkL0j TeydLad/yAQtPb4TbeWYjNDoxPVDf0cVpUrevLGmWE88UMYmgTqPze+h1W5Wri52 bzjdLklY/4cgcIZClHQ6F9CeRWqEBxvujA5Hj/cwOcn/ptVVJWUGi7sQo3sYkoSs HFu+F8XsTec14kGNC0Ab40eVdqs5l/w8+E+4jvgXeKGOtVns8DwoiUIzqXpyty89 Ib04mffrwWNjFtHvo/kIsNwP05X2PGE9HUHfwsTUfisl/ASvMmQp7D7vUoqQC/4B AMVzT5qpjkmfBHYQQGuw8FxJhMeAOjC6aAo6censhXJyiUhIfleQsN0syHdaNb8q 9RZlhAgQoVb6ZgvBV8r8unQh/WtNZ3AopwifwVJld2unsE/UNfQy2KyqOWBES/zf LP9sfuX0JnmHn8s1BQEUMPU1jF9ZVZCft7nufJDL6JhlAL+bwZeEN4yCiAHOPZqE ymSLHI9s8yWZoNpuMWKrI9kFexVnQFKmA3+quAJUcYHNMSsLkL8= =Gsio -----END PGP SIGNATURE----- Merge tag 'net-next-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Introduce and use a single page frag cache for allocating small skb heads, clawing back the 10-20% performance regression in UDP flood test from previous fixes. - Run packets which already went thru HW coalescing thru SW GRO. This significantly improves TCP segment coalescing and simplifies deployments as different workloads benefit from HW or SW GRO. - Shrink the size of the base zero-copy send structure. - Move TCP init under a new slow / sleepable version of DO_ONCE(). BPF: - Add BPF-specific, any-context-safe memory allocator. - Add helpers/kfuncs for PKCS#7 signature verification from BPF programs. - Define a new map type and related helpers for user space -> kernel communication over a ring buffer (BPF_MAP_TYPE_USER_RINGBUF). - Allow targeting BPF iterators to loop through resources of one task/thread. - Add ability to call selected destructive functions. Expose crash_kexec() to allow BPF to trigger a kernel dump. Use CAP_SYS_BOOT check on the loading process to judge permissions. - Enable BPF to collect custom hierarchical cgroup stats efficiently by integrating with the rstat framework. - Support struct arguments for trampoline based programs. Only structs with size <= 16B and x86 are supported. - Invoke cgroup/connect{4,6} programs for unprivileged ICMP ping sockets (instead of just TCP and UDP sockets). - Add a helper for accessing CLOCK_TAI for time sensitive network related programs. - Support accessing network tunnel metadata's flags. - Make TCP SYN ACK RTO tunable by BPF programs with TCP Fast Open. - Add support for writing to Netfilter's nf_conn:mark. Protocols: - WiFi: more Extremely High Throughput (EHT) and Multi-Link Operation (MLO) work (802.11be, WiFi 7). - vsock: improve support for SO_RCVLOWAT. - SMC: support SO_REUSEPORT. - Netlink: define and document how to use netlink in a "modern" way. Support reporting missing attributes via extended ACK. - IPSec: support collect metadata mode for xfrm interfaces. - TCPv6: send consistent autoflowlabel in SYN_RECV state and RST packets. - TCP: introduce optional per-netns connection hash table to allow better isolation between namespaces (opt-in, at the cost of memory and cache pressure). - MPTCP: support TCP_FASTOPEN_CONNECT. - Add NEXT-C-SID support in Segment Routing (SRv6) End behavior. - Adjust IP_UNICAST_IF sockopt behavior for connected UDP sockets. - Open vSwitch: - Allow specifying ifindex of new interfaces. - Allow conntrack and metering in non-initial user namespace. - TLS: support the Korean ARIA-GCM crypto algorithm. - Remove DECnet support. Driver API: - Allow selecting the conduit interface used by each port in DSA switches, at runtime. - Ethernet Power Sourcing Equipment and Power Device support. - Add tc-taprio support for queueMaxSDU parameter, i.e. setting per traffic class max frame size for time-based packet schedules. - Support PHY rate matching - adapting between differing host-side and link-side speeds. - Introduce QUSGMII PHY mode and 1000BASE-KX interface mode. - Validate OF (device tree) nodes for DSA shared ports; make phylink-related properties mandatory on DSA and CPU ports. Enforcing more uniformity should allow transitioning to phylink. - Require that flash component name used during update matches one of the components for which version is reported by info_get(). - Remove "weight" argument from driver-facing NAPI API as much as possible. It's one of those magic knobs which seemed like a good idea at the time but is too indirect to use in practice. - Support offload of TLS connections with 256 bit keys. New hardware / drivers: - Ethernet: - Microchip KSZ9896 6-port Gigabit Ethernet Switch - Renesas Ethernet AVB (EtherAVB-IF) Gen4 SoCs - Analog Devices ADIN1110 and ADIN2111 industrial single pair Ethernet (10BASE-T1L) MAC+PHY. - Rockchip RV1126 Gigabit Ethernet (a version of stmmac IP). - Ethernet SFPs / modules: - RollBall / Hilink / Turris 10G copper SFPs - HALNy GPON module - WiFi: - CYW43439 SDIO chipset (brcmfmac) - CYW89459 PCIe chipset (brcmfmac) - BCM4378 on Apple platforms (brcmfmac) Drivers: - CAN: - gs_usb: HW timestamp support - Ethernet PHYs: - lan8814: cable diagnostics - Ethernet NICs: - Intel (100G): - implement control of FCS/CRC stripping - port splitting via devlink - L2TPv3 filtering offload - nVidia/Mellanox: - tunnel offload for sub-functions - MACSec offload, w/ Extended packet number and replay window offload - significantly restructure, and optimize the AF_XDP support, align the behavior with other vendors - Huawei: - configuring DSCP map for traffic class selection - querying standard FEC statistics - querying SerDes lane number via ethtool - Marvell/Cavium: - egress priority flow control - MACSec offload - AMD/SolarFlare: - PTP over IPv6 and raw Ethernet - small / embedded: - ax88772: convert to phylink (to support SFP cages) - altera: tse: convert to phylink - ftgmac100: support fixed link - enetc: standard Ethtool counters - macb: ZynqMP SGMII dynamic configuration support - tsnep: support multi-queue and use page pool - lan743x: Rx IP & TCP checksum offload - igc: add xdp frags support to ndo_xdp_xmit - Ethernet high-speed switches: - Marvell (prestera): - support SPAN port features (traffic mirroring) - nexthop object offloading - Microchip (sparx5): - multicast forwarding offload - QoS queuing offload (tc-mqprio, tc-tbf, tc-ets) - Ethernet embedded switches: - Marvell (mv88e6xxx): - support RGMII cmode - NXP (felix): - standardized ethtool counters - Microchip (lan966x): - QoS queuing offload (tc-mqprio, tc-tbf, tc-cbs, tc-ets) - traffic policing and mirroring - link aggregation / bonding offload - QUSGMII PHY mode support - Qualcomm 802.11ax WiFi (ath11k): - cold boot calibration support on WCN6750 - support to connect to a non-transmit MBSSID AP profile - enable remain-on-channel support on WCN6750 - Wake-on-WLAN support for WCN6750 - support to provide transmit power from firmware via nl80211 - support to get power save duration for each client - spectral scan support for 160 MHz - MediaTek WiFi (mt76): - WiFi-to-Ethernet bridging offload for MT7986 chips - RealTek WiFi (rtw89): - P2P support" * tag 'net-next-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1864 commits) eth: pse: add missing static inlines once: rename _SLOW to _SLEEPABLE net: pse-pd: add regulator based PSE driver dt-bindings: net: pse-dt: add bindings for regulator based PoDL PSE controller ethtool: add interface to interact with Ethernet Power Equipment net: mdiobus: search for PSE nodes by parsing PHY nodes. net: mdiobus: fwnode_mdiobus_register_phy() rework error handling net: add framework to support Ethernet PSE and PDs devices dt-bindings: net: phy: add PoDL PSE property net: marvell: prestera: Propagate nh state from hw to kernel net: marvell: prestera: Add neighbour cache accounting net: marvell: prestera: add stub handler neighbour events net: marvell: prestera: Add heplers to interact with fib_notifier_info net: marvell: prestera: Add length macros for prestera_ip_addr net: marvell: prestera: add delayed wq and flush wq on deinit net: marvell: prestera: Add strict cleanup of fib arbiter net: marvell: prestera: Add cleanup of allocated fib_nodes net: marvell: prestera: Add router nexthops ABI eth: octeon: fix build after netif_napi_add() changes net/mlx5: E-Switch, Return EBUSY if can't get mode lock ... |
||
Linus Torvalds
|
c645c11a2d |
audit/stable-6.1 PR 20221003
-----BEGIN PGP SIGNATURE----- iQJIBAABCAAyFiEES0KozwfymdVUl37v6iDy2pc3iXMFAmM68bIUHHBhdWxAcGF1 bC1tb29yZS5jb20ACgkQ6iDy2pc3iXN1/Q/+L0xoduzZg6u8cpkVrBmqPmhFFxDi 580v69CUcXa29+sxVpH7rPJIhaR/EK/UrdNTVgGa+cvo11StgzuieY3Ds3gzfhmf 7G7fvZtiloZ1SWnfUMuk3NxNCWBHGE7CE2l+CgWqKmWuOlXcHyq81ydJ1Aydr8Gr qJhGPf+StC2XxXGlsAqKHboxTRbFDREFKrKllF2XYOiNNcGoyNcmeSoLGzTweWTx 52YbtiUtjOk4r482QJKwGRxmKLfFPeMDr7BZmB8acZasp+o0nLF9yaFlSUEmiwZO XMIqszdhywAhe0z+WAy6TnoQSHWkHKILa2+R2se7XB+EpEWie01bOfsYqg21Pgt8 HzcQ9edsiykCtXmgZLTt6K1+aKvBaY2R0kKtBhNR7Rn8XyfR5f9VCVE+YNCZAVxu OiQdvFX/etAc0bWAJzgDL1r3mHkMGmsyg+s1rXQoNnaAIK3t9VBCgKndWkoblHGF jnoUceU17RZiuqwwjp4FSSniX/1yHexIPGHvYY7lwrgbDeBgiZpOJM1mVZqW3ShE X+xgWyYIaLGndavzn41dzaa8irfRpvzWE3xywnghJx6BDGKwAkSX/yBpE3EzXirf nUE+50g919U27DWsWwm2ev+DkJwdb1d11jRRJbcNqHOqN3FCEmSGQAAl0h79Bib8 +/V0XWZ1tFOjPkE= =52r/ -----END PGP SIGNATURE----- Merge tag 'audit-pr-20221003' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit Pull audit updates from Paul Moore: "Six audit patches for v6.1, most are pretty trivial, but a quick list of the highlights are below: - Only free the audit proctitle information on task exit. This allows us to cache the information and improve performance slightly. - Use the time_after() macro to do time comparisons instead of doing it directly and potentially causing ourselves problems when the timer wraps. - Convert an audit_context state comparison from a relative enum comparison, e.g. (x < y), to a not-equal comparison to ensure that we are not caught out at some unknown point in the future by an enum shuffle. - A handful of small cleanups such as tidying up comments and removing unused declarations" * tag 'audit-pr-20221003' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit: audit: remove selinux_audit_rule_update() declaration audit: use time_after to compare time audit: free audit_proctitle only on task exit audit: explicitly check audit_context->context enum value audit: audit_context pid unused, context enum comment fix audit: fix repeated words in comments |
||
Kai-Heng Feng
|
e7fd8b6840 |
kernel/reboot: Add SYS_OFF_MODE_RESTART_PREPARE mode
Add SYS_OFF_MODE_RESTART_PREPARE callbacks to be invoked before a system restart. Suggested-by: Dmitry Osipenko <dmitry.osipenko@collabora.com> Reviewed-by: Dmitry Osipenko <dmitry.osipenko@collabora.com> Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> [ rjw: Changelog edits ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
||
Petr Mladek
|
c77ae0b863 | Merge branch 'rework/kthreads' into for-linus | ||
Peter Zijlstra
|
82aad7ff7a |
perf/hw_breakpoint: Annotate tsk->perf_event_mutex vs ctx->mutex
Perf fuzzer gifted a lockdep splat: perf_event_init_context() mutex_lock(parent_ctx->mutex); (B) inherit_task_group() inherit_group() inherit_event() perf_event_alloc() perf_try_init_event() := hw_breakpoint_event_init() register_perf_hw_breakpoint() mutex_lock(child->perf_event_mutex); (A) Which is against the normal (documented) order. Now, this is a false positive in that child is not published yet, but also inherited events never end up on ->perf_event_list. Annotate this one away. Fixes: 0912037fec11 ("perf/hw_breakpoint: Reduce contention with large number of tasks") Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> |
||
Peter Zijlstra
|
7be51cc1c6 |
perf: Fix pmu_filter_match()
Mark reported that the new for_each_sibling_event() assertion triggers in pmu_filter_match() -- which isn't always called with IRQs disabled or ctx->mutex held. Fixes: f3c0eba28704 ("perf: Add a few assertions") Reported-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lkml.kernel.org/r/YvvJq2f/7eFVcnNy@FVFF77S0Q05N |
||
Linus Torvalds
|
26b84401da |
lsm/stable-6.1 PR 20221003
-----BEGIN PGP SIGNATURE----- iQJIBAABCAAyFiEES0KozwfymdVUl37v6iDy2pc3iXMFAmM68YIUHHBhdWxAcGF1 bC1tb29yZS5jb20ACgkQ6iDy2pc3iXOTbA//TR8i+Wy8iswUCmtfmYg91h1uebpl /kjNsSmfgivAUTGamr3eN2WRlGhZfkFDPIHa25uybSA6Q+75p4lst83Rt3HDbjkv Ga7grCXnHwSDwJoHOSeFh0pojV2u7Zvfmiib2U5hPZEmd3kBw3NCgAJVcSGN80B2 dct36fzZNXjvpWDbygmFtRRkmEseslSkft8bUVvNZBP+B0zvv3vcNY1QFuKuK+W2 8wWpvO/cCSmke5i2c2ktHSk2f8/Y6n26Ik/OTHcTVfoKZLRaFbXEzLyxzLrNWd6m hujXgcxszTtHdmoXx+J6uBauju7TR8pi1x8mO2LSGrlpRc1cX0A5ED8WcH71+HVE 8L1fIOmZShccPZn8xRok7oYycAUm/gIfpmSLzmZA76JsZYAe+mp9Ze9FA6fZtSwp 7Q/rfw/Rlz25WcFBe4xypP078HkOmqutkCk2zy5liR+cWGrgy/WKX15vyC0TaPrX tbsRKuCLkipgfXrTk0dX3kmhz+3bJYjqeZEt7sfPSZYpaOGkNXVmAW0wnCOTuLMU +8pIVktvQxMmACEj2gBMz11iooR4DpWLxOcQQR/impgCpNdZ60nA0a6KPJoIXC+5 NfTa422FZkc99QRVblUZyWSgJBW78Z3ZAQcQlo1AGLlFydbfrSFTRLbmNJZo/Nkl KwpGvWs5nB0rVw0= =VZl5 -----END PGP SIGNATURE----- Merge tag 'lsm-pr-20221003' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm Pull LSM updates from Paul Moore: "Seven patches for the LSM layer and we've got a mix of trivial and significant patches. Highlights below, starting with the smaller bits first so they don't get lost in the discussion of the larger items: - Remove some redundant NULL pointer checks in the common LSM audit code. - Ratelimit the lockdown LSM's access denial messages. With this change there is a chance that the last visible lockdown message on the console is outdated/old, but it does help preserve the initial series of lockdown denials that started the denial message flood and my gut feeling is that these might be the more valuable messages. - Open userfaultfds as readonly instead of read/write. While this code obviously lives outside the LSM, it does have a noticeable impact on the LSMs with Ondrej explaining the situation in the commit description. It is worth noting that this patch languished on the VFS list for over a year without any comments (objections or otherwise) so I took the liberty of pulling it into the LSM tree after giving fair notice. It has been in linux-next since the end of August without any noticeable problems. - Add a LSM hook for user namespace creation, with implementations for both the BPF LSM and SELinux. Even though the changes are fairly small, this is the bulk of the diffstat as we are also including BPF LSM selftests for the new hook. It's also the most contentious of the changes in this pull request with Eric Biederman NACK'ing the LSM hook multiple times during its development and discussion upstream. While I've never taken NACK's lightly, I'm sending these patches to you because it is my belief that they are of good quality, satisfy a long-standing need of users and distros, and are in keeping with the existing nature of the LSM layer and the Linux Kernel as a whole. The patches in implement a LSM hook for user namespace creation that allows for a granular approach, configurable at runtime, which enables both monitoring and control of user namespaces. The general consensus has been that this is far preferable to the other solutions that have been adopted downstream including outright removal from the kernel, disabling via system wide sysctls, or various other out-of-tree mechanisms that users have been forced to adopt since we haven't been able to provide them an upstream solution for their requests. Eric has been steadfast in his objections to this LSM hook, explaining that any restrictions on the user namespace could have significant impact on userspace. While there is the possibility of impacting userspace, it is important to note that this solution only impacts userspace when it is requested based on the runtime configuration supplied by the distro/admin/user. Frederick (the pathset author), the LSM/security community, and myself have tried to work with Eric during development of this patchset to find a mutually acceptable solution, but Eric's approach and unwillingness to engage in a meaningful way have made this impossible. I have CC'd Eric directly on this pull request so he has a chance to provide his side of the story; there have been no objections outside of Eric's" * tag 'lsm-pr-20221003' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm: lockdown: ratelimit denial messages userfaultfd: open userfaultfds with O_RDONLY selinux: Implement userns_create hook selftests/bpf: Add tests verifying bpf lsm userns_create hook bpf-lsm: Make bpf_lsm_userns_create() sleepable security, lsm: Introduce security_create_user_ns() lsm: clean up redundant NULL pointer check |
||
Jakub Kicinski
|
e52f7c1ddf |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Merge in the left-over fixes before the net-next pull-request. Conflicts: drivers/net/ethernet/mediatek/mtk_ppe.c ae3ed15da588 ("net: ethernet: mtk_eth_soc: fix state in __mtk_foe_entry_clear") 9d8cb4c096ab ("net: ethernet: mtk_eth_soc: add foe_entry_size to mtk_eth_soc") https://lore.kernel.org/all/6cb6893b-4921-a068-4c30-1109795110bb@tessares.net/ kernel/bpf/helpers.c 8addbfc7b308 ("bpf: Gate dynptr API behind CAP_BPF") 5679ff2f138f ("bpf: Move bpf_loop and bpf_for_each_map_elem under CAP_BPF") 8a67f2de9b1d ("bpf: expose bpf_strtol and bpf_strtoul to all program types") https://lore.kernel.org/all/20221003201957.13149-1-daniel@iogearbox.net/ Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
Linus Torvalds
|
865dad2022 |
kcfi updates for v6.1-rc1
This replaces the prior support for Clang's standard Control Flow Integrity (CFI) instrumentation, which has required a lot of special conditions (e.g. LTO) and work-arounds. The current implementation ("Kernel CFI") is specific to C, directly designed for the Linux kernel, and takes advantage of architectural features like x86's IBT. This series retains arm64 support and adds x86 support. Additional "generic" architectural support is expected soon: https://github.com/samitolvanen/llvm-project/commits/kcfi_generic - treewide: Remove old CFI support details - arm64: Replace Clang CFI support with Clang KCFI support - x86: Introduce Clang KCFI support -----BEGIN PGP SIGNATURE----- iQJKBAABCgA0FiEEpcP2jyKd1g9yPm4TiXL039xtwCYFAmM4aAUWHGtlZXNjb29r QGNocm9taXVtLm9yZwAKCRCJcvTf3G3AJkgWD/4mUgb7xewNIG/+fuipGd620Iao K0T8q4BNxLNRltOxNc3Q0WMDCggX0qJGCeds7EdFQJQOGxWcbifM8MAS4idAGM0G fc3Gxl1imC/oF6goCAbQgndA6jYFIWXGsv8LsRjAXRidWLFr3GFAqVqYJyokSySr 8zMQsEDuF4I1gQnOhEWdtPZbV3MQ4ZjfFzpv+33agbq6Gb72vKvDh3G6g2VXlxjt 1qnMtS+eEpbBU65cJkOi4MSLgymWbnIAeTMb0dbsV4kJ08YoTl8uz1B+weeH6GgT WP73ZJ4nqh1kkkT9EqS9oKozNB9fObhvCokEuAjuQ7i1eCEZsbShvRc0iL7OKTGG UfuTJa5qQ4h7Z0JS35FCSJETa+fcG0lTyEd133nLXLMZP9K2antf+A6O//fd0J1V Jg4VN7DQmZ+UNGOzRkL6dTtQUy4PkxhniIloaClfSYXxhNirA+v//sHTnTK3z2Bl 6qceYqmFmns2Laual7+lvnZgt6egMBcmAL/MOdbU74+KIR9Xw76wxQjifktHX+WF FEUQkUJDB5XcUyKlbvHoqobRMxvEZ8RIlC5DIkgFiPRE3TI0MqfzNSFnQ/6+lFNg Y0AS9HYJmcj8sVzAJ7ji24WPFCXzsbFn6baJa9usDNbWyQZokYeiv7ZPNPHPDVrv YEBP6aYko0lVSUS9qw== =Li4D -----END PGP SIGNATURE----- Merge tag 'kcfi-v6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux Pull kcfi updates from Kees Cook: "This replaces the prior support for Clang's standard Control Flow Integrity (CFI) instrumentation, which has required a lot of special conditions (e.g. LTO) and work-arounds. The new implementation ("Kernel CFI") is specific to C, directly designed for the Linux kernel, and takes advantage of architectural features like x86's IBT. This series retains arm64 support and adds x86 support. GCC support is expected in the future[1], and additional "generic" architectural support is expected soon[2]. Summary: - treewide: Remove old CFI support details - arm64: Replace Clang CFI support with Clang KCFI support - x86: Introduce Clang KCFI support" Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=107048 [1] Link: https://github.com/samitolvanen/llvm-project/commits/kcfi_generic [2] * tag 'kcfi-v6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: (22 commits) x86: Add support for CONFIG_CFI_CLANG x86/purgatory: Disable CFI x86: Add types to indirectly called assembly functions x86/tools/relocs: Ignore __kcfi_typeid_ relocations kallsyms: Drop CONFIG_CFI_CLANG workarounds objtool: Disable CFI warnings objtool: Preserve special st_shndx indexes in elf_update_symbol treewide: Drop __cficanonical treewide: Drop WARN_ON_FUNCTION_MISMATCH treewide: Drop function_nocfi init: Drop __nocfi from __init arm64: Drop unneeded __nocfi attributes arm64: Add CFI error handling arm64: Add types to indirect called assembly functions psci: Fix the function type for psci_initcall_t lkdtm: Emit an indirect call for CFI tests cfi: Add type helper macros cfi: Switch to -fsanitize=kcfi cfi: Drop __CFI_ADDRESSABLE cfi: Remove CONFIG_CFI_CLANG_SHADOW ... |
||
Linus Torvalds
|
8aebac8293 |
Rust introduction for v6.1-rc1
The initial support of Rust-for-Linux comes in roughly 4 areas: - Kernel internals (kallsyms expansion for Rust symbols, %pA format) - Kbuild infrastructure (Rust build rules and support scripts) - Rust crates and bindings for initial minimum viable build - Rust kernel documentation and samples Rust support has been in linux-next for a year and a half now, and the short log doesn't do justice to the number of people who have contributed both to the Linux kernel side but also to the upstream Rust side to support the kernel's needs. Thanks to these 173 people, and many more, who have been involved in all kinds of ways: Miguel Ojeda, Wedson Almeida Filho, Alex Gaynor, Boqun Feng, Gary Guo, Björn Roy Baron, Andreas Hindborg, Adam Bratschi-Kaye, Benno Lossin, Maciej Falkowski, Finn Behrens, Sven Van Asbroeck, Asahi Lina, FUJITA Tomonori, John Baublitz, Wei Liu, Geoffrey Thomas, Philip Herron, Arthur Cohen, David Faust, Antoni Boucher, Philip Li, Yujie Liu, Jonathan Corbet, Greg Kroah-Hartman, Paul E. McKenney, Josh Triplett, Kent Overstreet, David Gow, Alice Ryhl, Robin Randhawa, Kees Cook, Nick Desaulniers, Matthew Wilcox, Linus Walleij, Joe Perches, Michael Ellerman, Petr Mladek, Masahiro Yamada, Arnaldo Carvalho de Melo, Andrii Nakryiko, Konstantin Shelekhin, Rasmus Villemoes, Konstantin Ryabitsev, Stephen Rothwell, Andy Shevchenko, Sergey Senozhatsky, John Paul Adrian Glaubitz, David Laight, Nathan Chancellor, Jonathan Cameron, Daniel Latypov, Shuah Khan, Brendan Higgins, Julia Lawall, Laurent Pinchart, Geert Uytterhoeven, Akira Yokosawa, Pavel Machek, David S. Miller, John Hawley, James Bottomley, Arnd Bergmann, Christian Brauner, Dan Robertson, Nicholas Piggin, Zhouyi Zhou, Elena Zannoni, Jose E. Marchesi, Leon Romanovsky, Will Deacon, Richard Weinberger, Randy Dunlap, Paolo Bonzini, Roland Dreier, Mark Brown, Sasha Levin, Ted Ts'o, Steven Rostedt, Jarkko Sakkinen, Michal Kubecek, Marco Elver, Al Viro, Keith Busch, Johannes Berg, Jan Kara, David Sterba, Connor Kuehl, Andy Lutomirski, Andrew Lunn, Alexandre Belloni, Peter Zijlstra, Russell King, Eric W. Biederman, Willy Tarreau, Christoph Hellwig, Emilio Cobos Álvarez, Christian Poveda, Mark Rousskov, John Ericson, TennyZhuang, Xuanwo, Daniel Paoliello, Manish Goregaokar, comex, Josh Stone, Stephan Sokolow, Philipp Krones, Guillaume Gomez, Joshua Nelson, Mats Larsen, Marc Poulhiès, Samantha Miller, Esteban Blanc, Martin Schmidt, Martin Rodriguez Reboredo, Daniel Xu, Viresh Kumar, Bartosz Golaszewski, Vegard Nossum, Milan Landaverde, Dariusz Sosnowski, Yuki Okushi, Matthew Bakhtiari, Wu XiangCheng, Tiago Lam, Boris-Chengbiao Zhou, Sumera Priyadarsini, Viktor Garske, Niklas Mohrin, Nándor István Krácser, Morgan Bartlett, Miguel Cano, Léo Lanteri Thauvin, Julian Merkle, Andreas Reindl, Jiapeng Chong, Fox Chen, Douglas Su, Antonio Terceiro, SeongJae Park, Sergio González Collado, Ngo Iok Ui (Wu Yu Wei), Joshua Abraham, Milan, Daniel Kolsoi, ahomescu, Manas, Luis Gerhorst, Li Hongyu, Philipp Gesang, Russell Currey, Jalil David Salamé Messina, Jon Olson, Raghvender, Angelos, Kaviraj Kanagaraj, Paul Römer, Sladyn Nunes, Mauro Baladés, Hsiang-Cheng Yang, Abhik Jain, Hongyu Li, Sean Nash, Yuheng Su, Peng Hao, Anhad Singh, Roel Kluin, Sara Saa, Geert Stappers, Garrett LeSage, IFo Hancroft, and Linus Torvalds. -----BEGIN PGP SIGNATURE----- iQJKBAABCgA0FiEEpcP2jyKd1g9yPm4TiXL039xtwCYFAmM4WcIWHGtlZXNjb29r QGNocm9taXVtLm9yZwAKCRCJcvTf3G3AJlGrD/93HbmxjNi/hwdWF5UdWV1/W0kJ bSTh9JsNtN9atQGEUwxePBjrtxHE75lxSL0RJ+sWvaJ7vR3iv2qys+cEgU0ePrgX INZ3bvHAGgvPG1b0R6VxmakksHq1BdCDbCT3Ft5lSNxB0uQBi95KgjtR0lCH/NUl eoZnGJ0ZbKs5KpbzFqOjM2gmJ51geZppnfNFmbKOb3lSUpPQqhZLPDCzweE57GNo e2vcMoY4daVaSUxmo01TSEphrM5IjDxp5rs09+aeovfmpbeoiz33siyGiAxyM7CI +Ybxl+bBnyqXLadjbs9VvvtYzASFZgmrQdwIQbY8j/sqsw34jmZarOwa5iUVmo+Q 2w1CDDNLMG3XpI/PdnUklFRIJg1uYCM+OXgZY2MFFqzbjoik/zFv2qFWTp1F5+XV DdLxoN9quBPDSVDFQjAZPsyCD/pSRfiJYh9s7BdlhUPL6rk9uLIgZyZuPqy3kWXn 2Z02lWJpiHUtTaICdUDyNPFzTggDHEfY2DvmuedXpsyhlMkCdtFS5zoo/evl8pb6 xUV7qdfpjyLyTLmLWjYEVRO6DJJuFQWMK5Qpqn6O0y3wch3XV+At5QDk2TE2WMvB cYwd9nCqcMs7J0HrdoDmtLwew1jrLd1xefqDgD0zd6B/+Dk9W4gFD69Stmtarg7d KGRvH0wnL0keMxy31w== =zz09 -----END PGP SIGNATURE----- Merge tag 'rust-v6.1-rc1' of https://github.com/Rust-for-Linux/linux Pull Rust introductory support from Kees Cook: "The tree has a recent base, but has fundamentally been in linux-next for a year and a half[1]. It's been updated based on feedback from the Kernel Maintainer's Summit, and to gain recent Reviewed-by: tags. Miguel is the primary maintainer, with me helping where needed/wanted. Our plan is for the tree to switch to the standard non-rebasing practice once this initial infrastructure series lands. The contents are the absolute minimum to get Rust code building in the kernel, with many more interfaces[2] (and drivers - NVMe[3], 9p[4], M1 GPU[5]) on the way. The initial support of Rust-for-Linux comes in roughly 4 areas: - Kernel internals (kallsyms expansion for Rust symbols, %pA format) - Kbuild infrastructure (Rust build rules and support scripts) - Rust crates and bindings for initial minimum viable build - Rust kernel documentation and samples Rust support has been in linux-next for a year and a half now, and the short log doesn't do justice to the number of people who have contributed both to the Linux kernel side but also to the upstream Rust side to support the kernel's needs. Thanks to these 173 people, and many more, who have been involved in all kinds of ways: Miguel Ojeda, Wedson Almeida Filho, Alex Gaynor, Boqun Feng, Gary Guo, Björn Roy Baron, Andreas Hindborg, Adam Bratschi-Kaye, Benno Lossin, Maciej Falkowski, Finn Behrens, Sven Van Asbroeck, Asahi Lina, FUJITA Tomonori, John Baublitz, Wei Liu, Geoffrey Thomas, Philip Herron, Arthur Cohen, David Faust, Antoni Boucher, Philip Li, Yujie Liu, Jonathan Corbet, Greg Kroah-Hartman, Paul E. McKenney, Josh Triplett, Kent Overstreet, David Gow, Alice Ryhl, Robin Randhawa, Kees Cook, Nick Desaulniers, Matthew Wilcox, Linus Walleij, Joe Perches, Michael Ellerman, Petr Mladek, Masahiro Yamada, Arnaldo Carvalho de Melo, Andrii Nakryiko, Konstantin Shelekhin, Rasmus Villemoes, Konstantin Ryabitsev, Stephen Rothwell, Andy Shevchenko, Sergey Senozhatsky, John Paul Adrian Glaubitz, David Laight, Nathan Chancellor, Jonathan Cameron, Daniel Latypov, Shuah Khan, Brendan Higgins, Julia Lawall, Laurent Pinchart, Geert Uytterhoeven, Akira Yokosawa, Pavel Machek, David S. Miller, John Hawley, James Bottomley, Arnd Bergmann, Christian Brauner, Dan Robertson, Nicholas Piggin, Zhouyi Zhou, Elena Zannoni, Jose E. Marchesi, Leon Romanovsky, Will Deacon, Richard Weinberger, Randy Dunlap, Paolo Bonzini, Roland Dreier, Mark Brown, Sasha Levin, Ted Ts'o, Steven Rostedt, Jarkko Sakkinen, Michal Kubecek, Marco Elver, Al Viro, Keith Busch, Johannes Berg, Jan Kara, David Sterba, Connor Kuehl, Andy Lutomirski, Andrew Lunn, Alexandre Belloni, Peter Zijlstra, Russell King, Eric W. Biederman, Willy Tarreau, Christoph Hellwig, Emilio Cobos Álvarez, Christian Poveda, Mark Rousskov, John Ericson, TennyZhuang, Xuanwo, Daniel Paoliello, Manish Goregaokar, comex, Josh Stone, Stephan Sokolow, Philipp Krones, Guillaume Gomez, Joshua Nelson, Mats Larsen, Marc Poulhiès, Samantha Miller, Esteban Blanc, Martin Schmidt, Martin Rodriguez Reboredo, Daniel Xu, Viresh Kumar, Bartosz Golaszewski, Vegard Nossum, Milan Landaverde, Dariusz Sosnowski, Yuki Okushi, Matthew Bakhtiari, Wu XiangCheng, Tiago Lam, Boris-Chengbiao Zhou, Sumera Priyadarsini, Viktor Garske, Niklas Mohrin, Nándor István Krácser, Morgan Bartlett, Miguel Cano, Léo Lanteri Thauvin, Julian Merkle, Andreas Reindl, Jiapeng Chong, Fox Chen, Douglas Su, Antonio Terceiro, SeongJae Park, Sergio González Collado, Ngo Iok Ui (Wu Yu Wei), Joshua Abraham, Milan, Daniel Kolsoi, ahomescu, Manas, Luis Gerhorst, Li Hongyu, Philipp Gesang, Russell Currey, Jalil David Salamé Messina, Jon Olson, Raghvender, Angelos, Kaviraj Kanagaraj, Paul Römer, Sladyn Nunes, Mauro Baladés, Hsiang-Cheng Yang, Abhik Jain, Hongyu Li, Sean Nash, Yuheng Su, Peng Hao, Anhad Singh, Roel Kluin, Sara Saa, Geert Stappers, Garrett LeSage, IFo Hancroft, and Linus Torvalds" Link: https://lwn.net/Articles/849849/ [1] Link: https://github.com/Rust-for-Linux/linux/commits/rust [2] Link: |
||
Jakub Kicinski
|
ad061cf422 |
Merge https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf
Daniel Borkmann says: ==================== pull-request: bpf 2022-10-03 We've added 10 non-merge commits during the last 23 day(s) which contain a total of 14 files changed, 130 insertions(+), 69 deletions(-). The main changes are: 1) Fix dynptr helper API to gate behind CAP_BPF given it was not intended for unprivileged BPF programs, from Kumar Kartikeya Dwivedi. 2) Fix need_wakeup flag inheritance from umem buffer pool for shared xsk sockets, from Jalal Mostafa. 3) Fix truncated last_member_type_id in btf_struct_resolve() which had a wrong storage type, from Lorenz Bauer. 4) Fix xsk back-pressure mechanism on tx when amount of produced descriptors to CQ is lower than what was grabbed from xsk tx ring, from Maciej Fijalkowski. 5) Fix wrong cgroup attach flags being displayed to effective progs, from Pu Lehui. * https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf: xsk: Inherit need_wakeup flag for shared sockets bpf: Gate dynptr API behind CAP_BPF selftests/bpf: Adapt cgroup effective query uapi change bpftool: Fix wrong cgroup attach flags being assigned to effective progs bpf, cgroup: Reject prog_attach_flags array when effective query bpf: Ensure correct locking around vulnerable function find_vpid() bpf: btf: fix truncated last_member_type_id in btf_struct_resolve selftests/xsk: Add missing close() on netns fd xsk: Fix backpressure mechanism on Tx MAINTAINERS: Add include/linux/tnum.h to BPF CORE ==================== Link: https://lore.kernel.org/r/20221003201957.13149-1-daniel@iogearbox.net Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
wuchi
|
83d87a4ddb |
relay: use kvcalloc to alloc page array in relay_alloc_page_array
kvcalloc() is safer because it will check the integer overflows, and using it will simple the logic of allocation size. Link: https://lkml.kernel.org/r/20220909101025.82955-1-wuchi.zero@gmail.com Signed-off-by: wuchi <wuchi.zero@gmail.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Jens Axboe <axboe@kernel.dk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
Zach O'Keefe
|
34488399fa |
mm/madvise: add file and shmem support to MADV_COLLAPSE
Add support for MADV_COLLAPSE to collapse shmem-backed and file-backed memory into THPs (requires CONFIG_READ_ONLY_THP_FOR_FS=y). On success, the backing memory will be a hugepage. For the memory range and process provided, the page tables will synchronously have a huge pmd installed, mapping the THP. Other mappings of the file extent mapped by the memory range may be added to a set of entries that khugepaged will later process and attempt update their page tables to map the THP by a pmd. This functionality unlocks two important uses: (1) Immediately back executable text by THPs. Current support provided by CONFIG_READ_ONLY_THP_FOR_FS may take a long time on a large system which might impair services from serving at their full rated load after (re)starting. Tricks like mremap(2)'ing text onto anonymous memory to immediately realize iTLB performance prevents page sharing and demand paging, both of which increase steady state memory footprint. Now, we can have the best of both worlds: Peak upfront performance and lower RAM footprints. (2) userfaultfd-based live migration of virtual machines satisfy UFFD faults by fetching native-sized pages over the network (to avoid latency of transferring an entire hugepage). However, after guest memory has been fully copied to the new host, MADV_COLLAPSE can be used to immediately increase guest performance. Since khugepaged is single threaded, this change now introduces possibility of collapse contexts racing in file collapse path. There a important few places to consider: (1) hpage_collapse_scan_file(), when we xas_pause() and drop RCU. We could have the memory collapsed out from under us, but the next xas_for_each() iteration will correctly pick up the hugepage. The hugepage might not be up to date (insofar as copying of small page contents might not have completed - the page still may be locked), but regardless what small page index we were iterating over, we'll find the hugepage and identify it as a suitably aligned compound page of order HPAGE_PMD_ORDER. In khugepaged path, we locklessly check the value of the pmd, and only add it to deferred collapse array if we find pmd mapping pte table. This is fine, since other values that could have raced in right afterwards denote failure, or that the memory was successfully collapsed, so we don't need further processing. In madvise path, we'll take mmap_lock() in write to serialize against page table updates and will know what to do based on the true value of the pmd: recheck all ptes if we point to a pte table, directly install the pmd, if the pmd has been cleared, but memory not yet faulted, or nothing at all if we find a huge pmd. It's worth putting emphasis here on how we treat the none pmd here. If khugepaged has processed this mm's page tables already, it will have left the pmd cleared (ready for refault by the process). Depending on the VMA flags and sysfs settings, amount of RAM on the machine, and the current load, could be a relatively common occurrence - and as such is one we'd like to handle successfully in MADV_COLLAPSE. When we see the none pmd in collapse_pte_mapped_thp(), we've locked mmap_lock in write and checked (a) huepaged_vma_check() to see if the backing memory is appropriate still, along with VMA sizing and appropriate hugepage alignment within the file, and (b) we've found a hugepage head of order HPAGE_PMD_ORDER at the offset in the file mapped by our hugepage-aligned virtual address. Even though the common-case is likely race with khugepaged, given these checks (regardless how we got here - we could be operating on a completely different file than originally checked in hpage_collapse_scan_file() for all we know) it should be safe to directly make the pmd a huge pmd pointing to this hugepage. (2) collapse_file() is mostly serialized on the same file extent by lock sequence: | lock hupepage | lock mapping->i_pages | lock 1st page | unlock mapping->i_pages | <page checks> | lock mapping->i_pages | page_ref_freeze(3) | xas_store(hugepage) | unlock mapping->i_pages | page_ref_unfreeze(1) | unlock 1st page V unlock hugepage Once a context (who already has their fresh hugepage locked) locks mapping->i_pages exclusively, it will hold said lock until it locks the first page, and it will hold that lock until the after the hugepage has been added to the page cache (and will unlock the hugepage after page table update, though that isn't important here). A racing context that loses the race for mapping->i_pages will then lose the race to locking the first page. Here - depending on how far the other racing context has gotten - we might find the new hugepage (in which case we'll exit cleanly when we check PageTransCompound()), or we'll find the "old" 1st small page (in which we'll exit cleanly when we discover unexpected refcount of 2 after isolate_lru_page()). This is assuming we are able to successfully lock the page we find - in shmem path, we could just fail the trylock and exit cleanly anyways. Failure path in collapse_file() is similar: once we hold lock on 1st small page, we are serialized against other collapse contexts. Before the 1st small page is unlocked, we add it back to the pagecache and unfreeze the refcount appropriately. Contexts who lost the race to the 1st small page will then find the same 1st small page with the correct refcount and will be able to proceed. [zokeefe@google.com: don't check pmd value twice in collapse_pte_mapped_thp()] Link: https://lkml.kernel.org/r/20220927033854.477018-1-zokeefe@google.com [shy828301@gmail.com: Delete hugepage_vma_revalidate_anon(), remove check for multi-add in khugepaged_add_pte_mapped_thp()] Link: https://lore.kernel.org/linux-mm/CAHbLzkrtpM=ic7cYAHcqkubah5VTR8N5=k5RT8MTvv5rN1Y91w@mail.gmail.com/ Link: https://lkml.kernel.org/r/20220907144521.3115321-4-zokeefe@google.com Link: https://lkml.kernel.org/r/20220922224046.1143204-4-zokeefe@google.com Signed-off-by: Zach O'Keefe <zokeefe@google.com> Cc: Axel Rasmussen <axelrasmussen@google.com> Cc: Chris Kennelly <ckennelly@google.com> Cc: David Hildenbrand <david@redhat.com> Cc: David Rientjes <rientjes@google.com> Cc: Hugh Dickins <hughd@google.com> Cc: James Houghton <jthoughton@google.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Pasha Tatashin <pasha.tatashin@soleen.com> Cc: Peter Xu <peterx@redhat.com> Cc: Rongwei Wang <rongwei.wang@linux.alibaba.com> Cc: SeongJae Park <sj@kernel.org> Cc: Song Liu <songliubraving@fb.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Yang Shi <shy828301@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
Alexander Potapenko
|
a6a7aaba7f |
bpf: kmsan: initialize BPF registers with zeroes
When executing BPF programs, certain registers may get passed uninitialized to helper functions. E.g. when performing a JMP_CALL, registers BPF_R1-BPF_R5 are always passed to the helper, no matter how many of them are actually used. Passing uninitialized values as function parameters is technically undefined behavior, so we work around it by always initializing the registers. Link: https://lkml.kernel.org/r/20220915150417.722975-42-glider@google.com Signed-off-by: Alexander Potapenko <glider@google.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Andrey Konovalov <andreyknvl@gmail.com> Cc: Andrey Konovalov <andreyknvl@google.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Borislav Petkov <bp@alien8.de> Cc: Christoph Hellwig <hch@lst.de> Cc: Christoph Lameter <cl@linux.com> Cc: David Rientjes <rientjes@google.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Eric Biggers <ebiggers@google.com> Cc: Eric Biggers <ebiggers@kernel.org> Cc: Eric Dumazet <edumazet@google.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: Ilya Leoshkevich <iii@linux.ibm.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Kees Cook <keescook@chromium.org> Cc: Marco Elver <elver@google.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Petr Mladek <pmladek@suse.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Vegard Nossum <vegard.nossum@oracle.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
Alexander Potapenko
|
6cae637fa2 |
entry: kmsan: introduce kmsan_unpoison_entry_regs()
struct pt_regs passed into IRQ entry code is set up by uninstrumented asm functions, therefore KMSAN may not notice the registers are initialized. kmsan_unpoison_entry_regs() unpoisons the contents of struct pt_regs, preventing potential false positives. Unlike kmsan_unpoison_memory(), it can be called under kmsan_in_runtime(), which is often the case in IRQ entry code. Link: https://lkml.kernel.org/r/20220915150417.722975-41-glider@google.com Signed-off-by: Alexander Potapenko <glider@google.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Andrey Konovalov <andreyknvl@gmail.com> Cc: Andrey Konovalov <andreyknvl@google.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Borislav Petkov <bp@alien8.de> Cc: Christoph Hellwig <hch@lst.de> Cc: Christoph Lameter <cl@linux.com> Cc: David Rientjes <rientjes@google.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Eric Biggers <ebiggers@google.com> Cc: Eric Biggers <ebiggers@kernel.org> Cc: Eric Dumazet <edumazet@google.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: Ilya Leoshkevich <iii@linux.ibm.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Kees Cook <keescook@chromium.org> Cc: Marco Elver <elver@google.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Petr Mladek <pmladek@suse.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Vegard Nossum <vegard.nossum@oracle.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
Alexander Potapenko
|
74d8990988 |
kcov: kmsan: unpoison area->list in kcov_remote_area_put()
KMSAN does not instrument kernel/kcov.c for performance reasons (with CONFIG_KCOV=y virtually every place in the kernel invokes kcov instrumentation). Therefore the tool may miss writes from kcov.c that initialize memory. When CONFIG_DEBUG_LIST is enabled, list pointers from kernel/kcov.c are passed to instrumented helpers in lib/list_debug.c, resulting in false positives. To work around these reports, we unpoison the contents of area->list after initializing it. Link: https://lkml.kernel.org/r/20220915150417.722975-30-glider@google.com Signed-off-by: Alexander Potapenko <glider@google.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Andrey Konovalov <andreyknvl@gmail.com> Cc: Andrey Konovalov <andreyknvl@google.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Borislav Petkov <bp@alien8.de> Cc: Christoph Hellwig <hch@lst.de> Cc: Christoph Lameter <cl@linux.com> Cc: David Rientjes <rientjes@google.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Eric Biggers <ebiggers@google.com> Cc: Eric Biggers <ebiggers@kernel.org> Cc: Eric Dumazet <edumazet@google.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: Ilya Leoshkevich <iii@linux.ibm.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Kees Cook <keescook@chromium.org> Cc: Marco Elver <elver@google.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Petr Mladek <pmladek@suse.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Vegard Nossum <vegard.nossum@oracle.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
Alexander Potapenko
|
7ade4f1077 |
dma: kmsan: unpoison DMA mappings
KMSAN doesn't know about DMA memory writes performed by devices. We unpoison such memory when it's mapped to avoid false positive reports. Link: https://lkml.kernel.org/r/20220915150417.722975-22-glider@google.com Signed-off-by: Alexander Potapenko <glider@google.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Andrey Konovalov <andreyknvl@gmail.com> Cc: Andrey Konovalov <andreyknvl@google.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Borislav Petkov <bp@alien8.de> Cc: Christoph Hellwig <hch@lst.de> Cc: Christoph Lameter <cl@linux.com> Cc: David Rientjes <rientjes@google.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Eric Biggers <ebiggers@google.com> Cc: Eric Biggers <ebiggers@kernel.org> Cc: Eric Dumazet <edumazet@google.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: Ilya Leoshkevich <iii@linux.ibm.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Kees Cook <keescook@chromium.org> Cc: Marco Elver <elver@google.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Petr Mladek <pmladek@suse.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Vegard Nossum <vegard.nossum@oracle.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
Alexander Potapenko
|
50b5e49ca6 |
kmsan: handle task creation and exiting
Tell KMSAN that a new task is created, so the tool creates a backing metadata structure for that task. Link: https://lkml.kernel.org/r/20220915150417.722975-17-glider@google.com Signed-off-by: Alexander Potapenko <glider@google.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Andrey Konovalov <andreyknvl@gmail.com> Cc: Andrey Konovalov <andreyknvl@google.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Borislav Petkov <bp@alien8.de> Cc: Christoph Hellwig <hch@lst.de> Cc: Christoph Lameter <cl@linux.com> Cc: David Rientjes <rientjes@google.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Eric Biggers <ebiggers@google.com> Cc: Eric Biggers <ebiggers@kernel.org> Cc: Eric Dumazet <edumazet@google.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: Ilya Leoshkevich <iii@linux.ibm.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Kees Cook <keescook@chromium.org> Cc: Marco Elver <elver@google.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Petr Mladek <pmladek@suse.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Vegard Nossum <vegard.nossum@oracle.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
Alexander Potapenko
|
79dbd006a6 |
kmsan: disable instrumentation of unsupported common kernel code
EFI stub cannot be linked with KMSAN runtime, so we disable instrumentation for it. Instrumenting kcov, stackdepot or lockdep leads to infinite recursion caused by instrumentation hooks calling instrumented code again. Link: https://lkml.kernel.org/r/20220915150417.722975-13-glider@google.com Signed-off-by: Alexander Potapenko <glider@google.com> Reviewed-by: Marco Elver <elver@google.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Andrey Konovalov <andreyknvl@gmail.com> Cc: Andrey Konovalov <andreyknvl@google.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Borislav Petkov <bp@alien8.de> Cc: Christoph Hellwig <hch@lst.de> Cc: Christoph Lameter <cl@linux.com> Cc: David Rientjes <rientjes@google.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Eric Biggers <ebiggers@google.com> Cc: Eric Biggers <ebiggers@kernel.org> Cc: Eric Dumazet <edumazet@google.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: Ilya Leoshkevich <iii@linux.ibm.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Kees Cook <keescook@chromium.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Petr Mladek <pmladek@suse.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Vegard Nossum <vegard.nossum@oracle.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
Mike Kravetz
|
8d9bfb2608 |
hugetlb: add vma based lock for pmd sharing
Allocate a new hugetlb_vma_lock structure and hang off vm_private_data for synchronization use by vmas that could be involved in pmd sharing. This data structure contains a rw semaphore that is the primary tool used for synchronization. This new structure is ref counted, so that it can exist when NOT attached to a vma. This is only helpful in resolving lock ordering issues where code may need to obtain the vma_lock while there are no guarantees the vma may go away. By obtaining a ref on the structure, it can be guaranteed that at least the rw semaphore will not go away. Only add infrastructure for the new lock here. Actual use will be added in subsequent patches. [mike.kravetz@oracle.com: fix build issue for missing hugetlb_vma_lock_release] Link: https://lkml.kernel.org/r/YyNUtA1vRASOE4+M@monkey Link: https://lkml.kernel.org/r/20220914221810.95771-7-mike.kravetz@oracle.com Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com> Reviewed-by: Miaohe Lin <linmiaohe@huawei.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com> Cc: Axel Rasmussen <axelrasmussen@google.com> Cc: David Hildenbrand <david@redhat.com> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: James Houghton <jthoughton@google.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Mina Almasry <almasrymina@google.com> Cc: Muchun Song <songmuchun@bytedance.com> Cc: Naoya Horiguchi <naoya.horiguchi@linux.dev> Cc: Pasha Tatashin <pasha.tatashin@soleen.com> Cc: Peter Xu <peterx@redhat.com> Cc: Prakash Sangappa <prakash.sangappa@oracle.com> Cc: Sven Schnelle <svens@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
Matthew Wilcox (Oracle)
|
82e66bf761 |
uprobes: use new_folio in __replace_page()
Saves several calls to compound_head(). Link: https://lkml.kernel.org/r/20220902194653.1739778-57-willy@infradead.org Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
Matthew Wilcox (Oracle)
|
5fcd079af9 |
uprobes: use folios more widely in __replace_page()
Remove a few hidden calls to compound_head(). Link: https://lkml.kernel.org/r/20220902194653.1739778-45-willy@infradead.org Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
Linus Torvalds
|
c79e6fa98c |
Power management updates for 6.1-rc1
- Add isupport for Tiger Lake in no-HWP mode to intel_pstate (Doug Smythies). - Update the AMD P-state driver (Perry Yuan): * Fix wrong lowest perf fetch. * Map desired perf into pstate scope for powersave governor. * Update pstate frequency transition delay time. * Fix initial highest_perf value. * Clean up. - Move max CPU capacity to sugov_policy in the schedutil cpufreq governor (Lukasz Luba). - Add SM6115 to cpufreq-dt blocklist (Adam Skladowski). - Add support for Tegra239 and minor cleanups (Sumit Gupta, ye xingchen, and Yang Yingliang). - Add freq qos for qcom cpufreq driver and minor cleanups (Xuewen Yan, and Viresh Kumar). - Minor cleanups around functions called at module_init() (Xiu Jianfeng). - Use module_init and add module_exit for bmips driver (Zhang Jianhua). - Add AlderLake-N support to intel_idle (Zhang Rui). - Replace strlcpy() with unused retval with strscpy() in intel_idle (Wolfram Sang). - Remove redundant check from cpuidle_switch_governor() (Yu Liao). - Replace strlcpy() with unused retval with strscpy() in the powernv cpuidle driver (Wolfram Sang). - Drop duplicate word from a comment in the coupled cpuidle driver (Jason Wang). - Make rpm_resume() return -EINPROGRESS if RPM_NOWAIT is passed to it in the flags and the device is about to resume (Rafael Wysocki). - Add extra debugging statement for multiple active IRQs to system wakeup handling code (Mario Limonciello). - Replace strlcpy() with unused retval with strscpy() in the core system suspend support code (Wolfram Sang). - Update the intel_rapl power capping driver: * Use standard Energy Unit for SPR Dram RAPL domain (Zhang Rui). * Add support for RAPTORLAKE_S (Zhang Rui). * Fix UBSAN shift-out-of-bounds issue (Chao Qin). - Handle -EPROBE_DEFER when regulator is not probed on mtk-ci-devfreq.c (AngeloGioacchino Del Regno). - Fix message typo and use dev_err_probe() in rockchip-dfi.c (Christophe JAILLET). -----BEGIN PGP SIGNATURE----- iQJGBAABCAAwFiEE4fcc61cGeeHD/fCwgsRv/nhiVHEFAmM7OrYSHHJqd0Byand5 c29ja2kubmV0AAoJEILEb/54YlRxeKAP/jFiZ1lhTGRngiVLMV6a6SSSy5xzzXZZ b/V0oqsuUvWWo6CzVmfU4QfmKGr55+77NgI9Yh5qN6zJTEJmunuCYwVD80KdxPDJ 8SjMUNCACiVwfryLR1gFJlO+0BN4CWTxvto2gjGxzm0l1UQBACf71wm9MQCP8b7A gcBNuOtM7o5NLywDB+/528SiF9AXfZKjkwXhJACimak5yQytaCJaqtOWtcG2KqYF USunmqSB3IIVkAa5LJcwloc8wxHYo5mTPaWGGuSA65hfF42k3vJQ2/b8v8oTVza7 bKzhegErIYtL6B9FjB+P1FyknNOvT7BYr+4RSGLvaPySfjMn1bwz9fM1Epo59Guk Azz3ExpaPixDh+x7b89W1Gb751FZU/zlWT+h1CNy5sOP/ChfxgCEBHw0mnWJ2Y0u CPcI/Ch0FNQHG+PdbdGlyfvORHVh7te/t6dOhoEHXBue+1r3VkOo8tRGY9x+2IrX /JB968u1r0oajF0btGwaDdbbWlyMRTzjrxVl3bwsuz/Kv/0JxsryND2JT0zkKAMZ qYT29HQxhdE0Duw1chgAK6X+BsgP58Bu6LeM3mVcwnGPZE9QvcFa0GQh7z+H71AW 3yOGNmMVMqQSThBYFC6GDi7O2N1UEsLOMV9+ThTRh6D11nU4uiITM5QVIn8nWZGR z3IZ52Jg0oeJ =+3IL -----END PGP SIGNATURE----- Merge tag 'pm-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management updates from Rafael Wysocki: "These add support for some new hardware, extend the existing hardware support, fix some issues and clean up code Specifics: - Add isupport for Tiger Lake in no-HWP mode to intel_pstate (Doug Smythies) - Update the AMD P-state driver (Perry Yuan): - Fix wrong lowest perf fetch - Map desired perf into pstate scope for powersave governor - Update pstate frequency transition delay time - Fix initial highest_perf value - Clean up - Move max CPU capacity to sugov_policy in the schedutil cpufreq governor (Lukasz Luba) - Add SM6115 to cpufreq-dt blocklist (Adam Skladowski) - Add support for Tegra239 and minor cleanups (Sumit Gupta, ye xingchen, and Yang Yingliang) - Add freq qos for qcom cpufreq driver and minor cleanups (Xuewen Yan, and Viresh Kumar) - Minor cleanups around functions called at module_init() (Xiu Jianfeng) - Use module_init and add module_exit for bmips driver (Zhang Jianhua) - Add AlderLake-N support to intel_idle (Zhang Rui) - Replace strlcpy() with unused retval with strscpy() in intel_idle (Wolfram Sang) - Remove redundant check from cpuidle_switch_governor() (Yu Liao) - Replace strlcpy() with unused retval with strscpy() in the powernv cpuidle driver (Wolfram Sang) - Drop duplicate word from a comment in the coupled cpuidle driver (Jason Wang) - Make rpm_resume() return -EINPROGRESS if RPM_NOWAIT is passed to it in the flags and the device is about to resume (Rafael Wysocki) - Add extra debugging statement for multiple active IRQs to system wakeup handling code (Mario Limonciello) - Replace strlcpy() with unused retval with strscpy() in the core system suspend support code (Wolfram Sang) - Update the intel_rapl power capping driver: - Use standard Energy Unit for SPR Dram RAPL domain (Zhang Rui). - Add support for RAPTORLAKE_S (Zhang Rui). - Fix UBSAN shift-out-of-bounds issue (Chao Qin) - Handle -EPROBE_DEFER when regulator is not probed on mtk-ci-devfreq.c (AngeloGioacchino Del Regno) - Fix message typo and use dev_err_probe() in rockchip-dfi.c (Christophe JAILLET)" * tag 'pm-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (29 commits) cpufreq: qcom-cpufreq-hw: Add cpufreq qos for LMh cpufreq: Add __init annotation to module init funcs cpufreq: tegra194: change tegra239_cpufreq_soc to static PM / devfreq: rockchip-dfi: Fix an error message PM / devfreq: mtk-cci: Handle sram regulator probe deferral powercap: intel_rapl: Use standard Energy Unit for SPR Dram RAPL domain PM: runtime: Return -EINPROGRESS from rpm_resume() in the RPM_NOWAIT case intel_idle: Add AlderLake-N support powercap: intel_rapl: fix UBSAN shift-out-of-bounds issue cpufreq: tegra194: Add support for Tegra239 cpufreq: qcom-cpufreq-hw: Fix uninitialized throttled_freq warning cpufreq: intel_pstate: Add Tigerlake support in no-HWP mode powercap: intel_rapl: Add support for RAPTORLAKE_S cpufreq: amd-pstate: Fix initial highest_perf value cpuidle: Remove redundant check in cpuidle_switch_governor() PM: wakeup: Add extra debugging statement for multiple active IRQs cpufreq: tegra194: Remove the unneeded result variable PM: suspend: move from strlcpy() with unused retval to strscpy() intel_idle: move from strlcpy() with unused retval to strscpy() cpuidle: powernv: move from strlcpy() with unused retval to strscpy() ... |
||
Jakub Kicinski
|
a08d97a193 |
Merge https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Daniel Borkmann says: ==================== pull-request: bpf-next 2022-10-03 We've added 143 non-merge commits during the last 27 day(s) which contain a total of 151 files changed, 8321 insertions(+), 1402 deletions(-). The main changes are: 1) Add kfuncs for PKCS#7 signature verification from BPF programs, from Roberto Sassu. 2) Add support for struct-based arguments for trampoline based BPF programs, from Yonghong Song. 3) Fix entry IP for kprobe-multi and trampoline probes under IBT enabled, from Jiri Olsa. 4) Batch of improvements to veristat selftest tool in particular to add CSV output, a comparison mode for CSV outputs and filtering, from Andrii Nakryiko. 5) Add preparatory changes needed for the BPF core for upcoming BPF HID support, from Benjamin Tissoires. 6) Support for direct writes to nf_conn's mark field from tc and XDP BPF program types, from Daniel Xu. 7) Initial batch of documentation improvements for BPF insn set spec, from Dave Thaler. 8) Add a new BPF_MAP_TYPE_USER_RINGBUF map which provides single-user-space-producer / single-kernel-consumer semantics for BPF ring buffer, from David Vernet. 9) Follow-up fixes to BPF allocator under RT to always use raw spinlock for the BPF hashtab's bucket lock, from Hou Tao. 10) Allow creating an iterator that loops through only the resources of one task/thread instead of all, from Kui-Feng Lee. 11) Add support for kptrs in the per-CPU arraymap, from Kumar Kartikeya Dwivedi. 12) Add a new kfunc helper for nf to set src/dst NAT IP/port in a newly allocated CT entry which is not yet inserted, from Lorenzo Bianconi. 13) Remove invalid recursion check for struct_ops for TCP congestion control BPF programs, from Martin KaFai Lau. 14) Fix W^X issue with BPF trampoline and BPF dispatcher, from Song Liu. 15) Fix percpu_counter leakage in BPF hashtab allocation error path, from Tetsuo Handa. 16) Various cleanups in BPF selftests to use preferred ASSERT_* macros, from Wang Yufen. 17) Add invocation for cgroup/connect{4,6} BPF programs for ICMP pings, from YiFei Zhu. 18) Lift blinding decision under bpf_jit_harden = 1 to bpf_capable(), from Yauheni Kaliuta. 19) Various libbpf fixes and cleanups including a libbpf NULL pointer deref, from Xin Liu. * https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (143 commits) net: netfilter: move bpf_ct_set_nat_info kfunc in nf_nat_bpf.c Documentation: bpf: Add implementation notes documentations to table of contents bpf, docs: Delete misformatted table. selftests/xsk: Fix double free bpftool: Fix error message of strerror libbpf: Fix overrun in netlink attribute iteration selftests/bpf: Fix spelling mistake "unpriviledged" -> "unprivileged" samples/bpf: Fix typo in xdp_router_ipv4 sample bpftool: Remove unused struct event_ring_info bpftool: Remove unused struct btf_attach_point bpf, docs: Add TOC and fix formatting. bpf, docs: Add Clang note about BPF_ALU bpf, docs: Move Clang notes to a separate file bpf, docs: Linux byteswap note bpf, docs: Move legacy packet instructions to a separate file selftests/bpf: Check -EBUSY for the recurred bpf_setsockopt(TCP_CONGESTION) bpf: tcp: Stop bpf_setsockopt(TCP_CONGESTION) in init ops to recur itself bpf: Refactor bpf_setsockopt(TCP_CONGESTION) handling into another function bpf: Move the "cdg" tcp-cc check to the common sol_tcp_sockopt() bpf: Add __bpf_prog_{enter,exit}_struct_ops for struct_ops trampoline ... ==================== Link: https://lore.kernel.org/r/20221003194915.11847-1-daniel@iogearbox.net Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
Rafael J. Wysocki
|
0766fa2e8a |
Merge branch 'pm-cpufreq'
Merge cpufreq changes for 6.1-rc1: - Add isupport for Tiger Lake in no-HWP mode to intel_pstate (Doug Smythies). - Update the AMD P-state driver (Perry Yuan): * Fix wrong lowest perf fetch. * Map desired perf into pstate scope for powersave governor. * Update pstate frequency transition delay time. * Fix initial highest_perf value. * Clean up. - Move max CPU capacity to sugov_policy in the schedutil cpufreq governor (Lukasz Luba). - Add SM6115 to cpufreq-dt blocklist (Adam Skladowski). - Add support for Tegra239 and minor cleanups (Sumit Gupta, ye xingchen, and Yang Yingliang). - Add freq qos for qcom cpufreq driver and minor cleanups (Xuewen Yan, and Viresh Kumar). - Minor cleanups around functions called at module_init() (Xiu Jianfeng). - Use module_init and add module_exit for bmips driver (Zhang Jianhua). * pm-cpufreq: cpufreq: qcom-cpufreq-hw: Add cpufreq qos for LMh cpufreq: Add __init annotation to module init funcs cpufreq: tegra194: change tegra239_cpufreq_soc to static cpufreq: tegra194: Add support for Tegra239 cpufreq: qcom-cpufreq-hw: Fix uninitialized throttled_freq warning cpufreq: intel_pstate: Add Tigerlake support in no-HWP mode cpufreq: amd-pstate: Fix initial highest_perf value cpufreq: tegra194: Remove the unneeded result variable cpufreq: amd-pstate: update pstate frequency transition delay time cpufreq: amd_pstate: map desired perf into pstate scope for powersave governor cpufreq: amd_pstate: fix wrong lowest perf fetch cpufreq: amd-pstate: fix white-space cpufreq: amd-pstate: simplify cpudata pointer assignment cpufreq: bmips-cpufreq: Use module_init and add module_exit cpufreq: schedutil: Move max CPU capacity to sugov_policy cpufreq: Add SM6115 to cpufreq-dt-platdev blocklist |
||
Beau Belgrave
|
e5d271812e |
tracing/user_events: Move pages/locks into groups to prepare for namespaces
In order to enable namespaces or any sort of isolation within user_events the register lock and pages need to be broken up into groups. Each event and file now has a group pointer which stores the actual pages to map, lookup data and synchronization objects. This only enables a single group that maps to init_user_ns, as IMA namespace has done. This enables user_events to start the work of supporting namespaces by walking the namespaces up to the init_user_ns. Future patches will address other user namespaces and will align to the approaches the IMA namespace uses. Link: https://lore.kernel.org/linux-kernel/20220915193221.1728029-15-stefanb@linux.ibm.com/#t Link: https://lkml.kernel.org/r/20221001001016.2832-2-beaub@linux.microsoft.com Signed-off-by: Beau Belgrave <beaub@linux.microsoft.com> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> |
||
Linus Torvalds
|
890f242084 |
RCU pull request for v6.1
This pull request contains the following branches: doc.2022.08.31b: Documentation updates. This is the first in a series from an ongoing review of the RCU documentation. "Why are people thinking -that- about RCU? Oh. Because that is an entirely reasonable interpretation of its documentation." fixes.2022.08.31b: Miscellaneous fixes. kvfree.2022.08.31b: Improved memory allocation and heuristics. nocb.2022.09.01a: Improve rcu_nocbs diagnostic output. poll.2022.08.31b: Add full-sized polled RCU grace period state values. These are the same size as an rcu_head structure, which is double that of the traditional unsigned long state values that may still be obtained from et_state_synchronize_rcu(). The added size avoids missing overlapping grace periods. This benefit is that call_rcu() can be replaced by polling, which can be attractive in situations where RCU-protected data is aged out of memory. Early in the series, the size of this state value is three unsigned longs. Later in the series, the synchronize_rcu() and synchronize_rcu_expedited() fastpaths are reworked to permit the full state to be represented by only two unsigned longs. This reworking slows these two functions down in SMP kernels running either on single-CPU systems or on systems with all but one CPU offlined, but this should not be a significant problem. And if it somehow becomes a problem in some yet-as-unforeseen situations, three-value state values can be provided for only those situations. Finally, a pair of functions named same_state_synchronize_rcu() and same_state_synchronize_rcu_full() allow grace-period state values to be compared for equality. This permits users to maintain lists of data structures having the same state value, removing the need for per-data-structure grace-period state values, thus decreasing memory footprint. poll-srcu.2022.08.31b: Polled SRCU grace-period updates, including adding tests to rcutorture and reducing the incidence of Tiny SRCU grace-period-state counter wrap. tasks.2022.08.31b: Improve Tasks RCU diagnostics and quiescent-state detection. -----BEGIN PGP SIGNATURE----- iQJHBAABCgAxFiEEbK7UrM+RBIrCoViJnr8S83LZ+4wFAmM3bxQTHHBhdWxtY2tA a2VybmVsLm9yZwAKCRCevxLzctn7jC0zD/0cPe9Nl3LPKVTqDN8wWG6SUOHcwQrg dLBUo1pbBh3mK3HcHzwl1iIF7gd2nmKN7UT3m+C+qv+N3Q9ej9K+MutGThCiRvNT A56TDYU9I1xfqoQ25E9TL7nqty818rtYYMl36Rw8epcLKHo/It9MFODb5kEBY5ir P5UaIK2D4heHfJL6Di8JDq9vC5a/NlNIIkiIj7lUB+px0FpVW0dUqmnWbIOE74YH OBGJ/Mxn6KDO4WeFO0v0DxVaBTLd+khu6W0JspI0szOO6iyTqiDCGE5EqkEdcs5I Fk9WCifdo9nrQG0LPIuEBv0YnwNfGbe5nYXupAmGFb3tdCbjkM+W0UBUE032nXog 3E6m5FEBD1XGQttScFHm70kYssa+xI7khGb9/ZFoYN/QW28oWqwfnx6+eAZGxPNS AZx6pc2bebg8sOUhkz/Sv+qMH7CQgIgcMR66SKl5SdT1Onaig45sgdUuC23BshgG oEdDxvK7vexFQT6q0oqU8LAO/CVKdyVIswt3pB6CUmn8yNgSo+qDZzlEHt0gPdMY 4Xa1jnNtOHobDnI4g0JMdVqAujByrRq74ZsVW96hdedKrA0r9y462jnVBm9tqW68 lu0Lw9WLif2kw0lMY8Q59zqTL+fB8TdNiZrHoqefwvQ/ZrvinfHGSblcrS8zAhX3 4oVwCUs9pPQRMA== =AZPZ -----END PGP SIGNATURE----- Merge tag 'rcu.2022.09.30a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu Pull RCU updates from Paul McKenney: - Documentation updates. This is the first in a series from an ongoing review of the RCU documentation. "Why are people thinking -that- about RCU? Oh. Because that is an entirely reasonable interpretation of its documentation." - Miscellaneous fixes. - Improved memory allocation and heuristics. - Improve rcu_nocbs diagnostic output. - Add full-sized polled RCU grace period state values. These are the same size as an rcu_head structure, which is double that of the traditional unsigned long state values that may still be obtained from et_state_synchronize_rcu(). The added size avoids missing overlapping grace periods. This benefit is that call_rcu() can be replaced by polling, which can be attractive in situations where RCU-protected data is aged out of memory. Early in the series, the size of this state value is three unsigned longs. Later in the series, the fastpaths in synchronize_rcu() and synchronize_rcu_expedited() are reworked to permit the full state to be represented by only two unsigned longs. This reworking slows these two functions down in SMP kernels running either on single-CPU systems or on systems with all but one CPU offlined, but this should not be a significant problem. And if it somehow becomes a problem in some yet-as-unforeseen situations, three-value state values can be provided for only those situations. Finally, a pair of functions named same_state_synchronize_rcu() and same_state_synchronize_rcu_full() allow grace-period state values to be compared for equality. This permits users to maintain lists of data structures having the same state value, removing the need for per-data-structure grace-period state values, thus decreasing memory footprint. - Polled SRCU grace-period updates, including adding tests to rcutorture and reducing the incidence of Tiny SRCU grace-period-state counter wrap. - Improve Tasks RCU diagnostics and quiescent-state detection. * tag 'rcu.2022.09.30a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu: (55 commits) rcutorture: Use the barrier operation specified by cur_ops rcu-tasks: Make RCU Tasks Trace check for userspace execution rcu-tasks: Ensure RCU Tasks Trace loops have quiescent states rcu-tasks: Convert RCU_LOCKDEP_WARN() to WARN_ONCE() srcu: Make Tiny SRCU use full-sized grace-period counters srcu: Make Tiny SRCU poll_state_synchronize_srcu() more precise srcu: Add GP and maximum requested GP to Tiny SRCU rcutorture output rcutorture: Make "srcud" option also test polled grace-period API rcutorture: Limit read-side polling-API testing rcu: Add functions to compare grace-period state values rcutorture: Expand rcu_torture_write_types() first "if" statement rcutorture: Use 1-suffixed variable in rcu_torture_write_types() check rcu: Make synchronize_rcu() fastpath update only boot-CPU counters rcutorture: Adjust rcu_poll_need_2gp() for rcu_gp_oldstate field removal rcu: Remove ->rgos_polled field from rcu_gp_oldstate structure rcu: Make synchronize_rcu_expedited() fast path update .expedited_sequence rcu: Remove expedited grace-period fast-path forward-progress helper rcu: Make synchronize_rcu() fast path update ->gp_seq counters rcu-tasks: Remove grace-period fast-path rcu-tasks helper rcu: Set rcu_data structures' initial ->gpwrap value to true ... |
||
Chen Zhongjin
|
ed87277f12 |
tracing: Remove unused variable 'dups'
Reported by Clang [-Wunused-but-set-variable] 'commit c193707dde77 ("tracing: Remove code which merges duplicates")' This commit removed the code which merges duplicates in detect_dups(), but forgot to delete the variable 'dups' which used to merge duplicates in the loop. Now only 'total_dups' is needed, remove 'dups' for clean code. Link: https://lkml.kernel.org/r/20220930103236.253985-1-chenzhongjin@huawei.com Signed-off-by: Chen Zhongjin <chenzhongjin@huawei.com> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> |
||
Linus Torvalds
|
febae48afe |
Misc fixes:
- Fix a PMU enumeration/initialization bug on Intel Alder Lake CPUs. - Fix KVM guest PEBS register handling. - Fix race/reentry bug in perf_output_read_group() reading of PMU counters. Signed-off-by: Ingo Molnar <mingo@kernel.org> -----BEGIN PGP SIGNATURE----- iQJFBAABCgAvFiEEBpT5eoXrXCwVQwEKEnMQ0APhK1gFAmM5bd8RHG1pbmdvQGtl cm5lbC5vcmcACgkQEnMQ0APhK1gMmw/+Nudwq3g/YcarTfoiBOTV0Ey9b8KEDjzU BKk/k/W8+3Qd4lU2u6DzXIVMcIyJM2SpgdagsvVdWAPjx/qgu//zuQKP8ai8uRww ipBDB+PU39hDPyJwOy3YLVEdnPqiMBvzaWcfb35R5p/ZA+Y7p/ituw9HwZ/jql5d C1rEcu9vjleY8Cs5dVLuvlz57VPq8VuHcYsnMGODo2WYdjX3CRNnfjWQyJFBQYJk f/4WYGLqcDeFHWZ92X527mxsKHBFCZFx8zxLHyhjfckPPGLOophAQkimg0X0TWrH HU2iNVQWV6BlCvirWnovR9jcPvmEjabl1BWd/1KCdR+L+AYTveYxd10nXCbQHIT2 fT0T6m7TgPb4Resl8Jk33VuKFNaeNmdPrN0iKeEfFeIbT/p6+TAshhzBDbbhsrCB JVQx8Ri4kfbUSdiCsWLlreczslSYncfDvDrVB9WW8ngnv2VDwwKzJja/3Q2/hZH8 RDd9DVLfT7l4zdUvBmOIU/j4vPPTKf3bJVn+CVcxtztC10cdJC5Xsfseh5N4nyzT BjPxDDo7nX/fx53iNEb5aSfPz68KBUMmPdDLupPY+2olO9EOixS2tfA9AsU6tmIf 4y3RbnkEcKYknYRxJjmipKGsYL9AEeG9O7E+4aOJU4zfNbXJkoN0CwfRXY7+u/Ov nCLZTs2iWDM= =JFXZ -----END PGP SIGNATURE----- Merge tag 'perf-urgent-2022-10-02' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull misc perf fixes from Ingo Molnar: - Fix a PMU enumeration/initialization bug on Intel Alder Lake CPUs - Fix KVM guest PEBS register handling - Fix race/reentry bug in perf_output_read_group() reading of PMU counters * tag 'perf-urgent-2022-10-02' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/core: Fix reentry problem in perf_output_read_group() perf/x86/core: Completely disable guest PEBS via guest's global_ctrl perf/x86/intel: Fix unchecked MSR access error for Alder Lake N |
||
Peter Zijlstra
|
fdf756f712 |
sched: Fix more TASK_state comparisons
Boris reported hung_task splats after commit 5aec788aeb8e ("sched: Fix TASK_state comparisons"). Upon closer consideration of that change it doesn't only exclude TASK_KILLABLE, but also TASK_IDLE. Update the comment to reflect this fact and add an additional TASK_NOLOAD test to exclude them. Additionally, remove the TASK_FREEZABLE early exit from check_hung_task(), a freezable task is not a frozen task. Fixes: 5aec788aeb8e ("sched: Fix TASK_state comparisons") Reported-by: Borislav Petkov <bp@alien8.de> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Tested-by: Borislav Petkov <bp@alien8.de> |
||
Jakub Kicinski
|
accc3b4a57 |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
No conflicts. Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
Jason A. Donenfeld
|
37608ba315 |
utsname: contribute changes to RNG
On some small machines with little entropy, a quasi-unique hostname is sometimes a relevant factor. I've seen, for example, 8 character alpha-numeric serial numbers. In addition, the time at which the hostname is set is usually a decent measurement of how long early boot took. So, call add_device_randomness() on new hostnames, which feeds its arguments to the RNG in addition to a fresh cycle counter. Low cost hooks like this never hurt and can only ever help, and since this costs basically nothing for an operation that is never a fast path, this is an overall easy win. Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Dominik Brodowski <linux@dominikbrodowski.net> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> |
||
Martin KaFai Lau
|
64696c40d0 |
bpf: Add __bpf_prog_{enter,exit}_struct_ops for struct_ops trampoline
The struct_ops prog is to allow using bpf to implement the functions in a struct (eg. kernel module). The current usage is to implement the tcp_congestion. The kernel does not call the tcp-cc's ops (ie. the bpf prog) in a recursive way. The struct_ops is sharing the tracing-trampoline's enter/exit function which tracks prog->active to avoid recursion. It is needed for tracing prog. However, it turns out the struct_ops bpf prog will hit this prog->active and unnecessarily skipped running the struct_ops prog. eg. The '.ssthresh' may run in_task() and then interrupted by softirq that runs the same '.ssthresh'. Skip running the '.ssthresh' will end up returning random value to the caller. The patch adds __bpf_prog_{enter,exit}_struct_ops for the struct_ops trampoline. They do not track the prog->active to detect recursion. One exception is when the tcp_congestion's '.init' ops is doing bpf_setsockopt(TCP_CONGESTION) and then recurs to the same '.init' ops. This will be addressed in the following patches. Fixes: ca06f55b9002 ("bpf: Add per-program recursion prevention mechanism") Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org> Link: https://lore.kernel.org/r/20220929070407.965581-2-martin.lau@linux.dev Signed-off-by: Alexei Starovoitov <ast@kernel.org> |
||
Steven Rostedt (Google)
|
a0fcaaed0c |
ring-buffer: Fix race between reset page and reading page
The ring buffer is broken up into sub buffers (currently of page size). Each sub buffer has a pointer to its "tail" (the last event written to the sub buffer). When a new event is requested, the tail is locally incremented to cover the size of the new event. This is done in a way that there is no need for locking. If the tail goes past the end of the sub buffer, the process of moving to the next sub buffer takes place. After setting the current sub buffer to the next one, the previous one that had the tail go passed the end of the sub buffer needs to be reset back to the original tail location (before the new event was requested) and the rest of the sub buffer needs to be "padded". The race happens when a reader takes control of the sub buffer. As readers do a "swap" of sub buffers from the ring buffer to get exclusive access to the sub buffer, it replaces the "head" sub buffer with an empty sub buffer that goes back into the writable portion of the ring buffer. This swap can happen as soon as the writer moves to the next sub buffer and before it updates the last sub buffer with padding. Because the sub buffer can be released to the reader while the writer is still updating the padding, it is possible for the reader to see the event that goes past the end of the sub buffer. This can cause obvious issues. To fix this, add a few memory barriers so that the reader definitely sees the updates to the sub buffer, and also waits until the writer has put back the "tail" of the sub buffer back to the last event that was written on it. To be paranoid, it will only spin for 1 second, otherwise it will warn and shutdown the ring buffer code. 1 second should be enough as the writer does have preemption disabled. If the writer doesn't move within 1 second (with preemption disabled) something is horribly wrong. No interrupt should last 1 second! Link: https://lore.kernel.org/all/20220830120854.7545-1-jiazi.li@transsion.com/ Link: https://bugzilla.kernel.org/show_bug.cgi?id=216369 Link: https://lkml.kernel.org/r/20220929104909.0650a36c@gandalf.local.home Cc: Ingo Molnar <mingo@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: stable@vger.kernel.org Fixes: c7b0930857e22 ("ring-buffer: prevent adding write in discarded area") Reported-by: Jiazi.Li <jiazi.li@transsion.com> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> |
||
Beau Belgrave
|
39d6d08b2e |
tracing/user_events: Use bits vs bytes for enabled status page data
User processes may require many events and when they do the cache performance of a byte index status check is less ideal than a bit index. The previous event limit per-page was 4096, the new limit is 32,768. This change adds a bitwise index to the user_reg struct. Programs check that the bit at status_bit has a bit set within the status page(s). Link: https://lkml.kernel.org/r/20220728233309.1896-6-beaub@linux.microsoft.com Link: https://lore.kernel.org/all/2059213643.196683.1648499088753.JavaMail.zimbra@efficios.com/ Suggested-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Signed-off-by: Beau Belgrave <beaub@linux.microsoft.com> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> |
||
Beau Belgrave
|
d401b72458 |
tracing/user_events: Use refcount instead of atomic for ref tracking
User processes could open up enough event references to cause rollovers. These could cause use after free scenarios, which we do not want. Switching to refcount APIs prevent this, but will leak memory once saturated. Once saturated, user processes can still use the events. This prevents a bad user process from stopping existing telemetry from being emitted. Link: https://lkml.kernel.org/r/20220728233309.1896-5-beaub@linux.microsoft.com Link: https://lore.kernel.org/all/2059213643.196683.1648499088753.JavaMail.zimbra@efficios.com/ Reported-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Signed-off-by: Beau Belgrave <beaub@linux.microsoft.com> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> |
||
Beau Belgrave
|
e6f89a1498 |
tracing/user_events: Ensure user provided strings are safely formatted
User processes can provide bad strings that may cause issues or leak kernel details back out. Don't trust the content of these strings when formatting strings for matching. This also moves to a consistent dynamic length string creation model. Link: https://lkml.kernel.org/r/20220728233309.1896-4-beaub@linux.microsoft.com Link: https://lore.kernel.org/all/2059213643.196683.1648499088753.JavaMail.zimbra@efficios.com/ Reported-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Signed-off-by: Beau Belgrave <beaub@linux.microsoft.com> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> |
||
Beau Belgrave
|
95f187603d |
tracing/user_events: Use WRITE instead of READ for io vector import
import_single_range expects the direction/rw to be where it came from, not the protection/limit. Since the import is in a write path use WRITE. Link: https://lkml.kernel.org/r/20220728233309.1896-3-beaub@linux.microsoft.com Link: https://lore.kernel.org/all/2059213643.196683.1648499088753.JavaMail.zimbra@efficios.com/ Reported-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Signed-off-by: Beau Belgrave <beaub@linux.microsoft.com> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> |
||
Beau Belgrave
|
9cbf12343d |
tracing/user_events: Use NULL for strstr checks
Trivial fix to ensure strstr checks use NULL instead of 0. Link: https://lkml.kernel.org/r/20220728233309.1896-2-beaub@linux.microsoft.com Signed-off-by: Beau Belgrave <beaub@linux.microsoft.com> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> |
||
Colin Ian King
|
e841e8bfac |
tracing: Fix spelling mistake "preapre" -> "prepare"
There is a spelling mistake in the trace text. Fix it. Link: https://lkml.kernel.org/r/20220928215828.66325-1-colin.i.king@gmail.com Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> |
||
Steven Rostedt (Google)
|
2b0fd9a59b |
tracing: Wake up waiters when tracing is disabled
When tracing is disabled, there's no reason that waiters should stay waiting, wake them up, otherwise tasks get stuck when they should be flushing the buffers. Cc: stable@vger.kernel.org Fixes: e30f53aad2202 ("tracing: Do not busy wait in buffer splice") Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> |
||
Steven Rostedt (Google)
|
01b2a52171 |
tracing: Add ioctl() to force ring buffer waiters to wake up
If a process is waiting on the ring buffer for data, there currently isn't a clean way to force it to wake up. Add an ioctl call that will force any tasks that are waiting on the trace_pipe_raw file to wake up. Link: https://lkml.kernel.org/r/20220929095029.117f913f@gandalf.local.home Cc: stable@vger.kernel.org Cc: Ingo Molnar <mingo@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Fixes: e30f53aad2202 ("tracing: Do not busy wait in buffer splice") Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> |
||
Thomas Gleixner
|
78ba392c84 |
printk: Mark __printk percpu data ready __ro_after_init
This variable cannot change post boot. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: John Ogness <john.ogness@linutronix.de> Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org> Reviewed-by: Petr Mladek <pmladek@suse.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Petr Mladek <pmladek@suse.com> Link: https://lore.kernel.org/r/20220924000454.3319186-6-john.ogness@linutronix.de |
||
Thomas Gleixner
|
eb4531b346 |
printk: Remove bogus comment vs. boot consoles
The comment about unregistering boot consoles is just not matching the reality. Remove it. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: John Ogness <john.ogness@linutronix.de> Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org> Reviewed-by: Petr Mladek <pmladek@suse.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Petr Mladek <pmladek@suse.com> Link: https://lore.kernel.org/r/20220924000454.3319186-5-john.ogness@linutronix.de |
||
Thomas Gleixner
|
7fc11a521e |
printk: Remove write only variable nr_ext_console_drivers
Commit a699449bb13b ("printk: refactor and rework printing logic") removed the need for @nr_ext_console_drivers. Remove the unneeded variable. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: John Ogness <john.ogness@linutronix.de> Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org> Reviewed-by: Petr Mladek <pmladek@suse.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Petr Mladek <pmladek@suse.com> Link: https://lore.kernel.org/r/20220924000454.3319186-4-john.ogness@linutronix.de |