IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Add a Device Tree for the Allo.com Sparky SBC.
Acked-by: Sudeep Kumar <sudeepkumar@cem-solutions.net>
[AF: Adjusted SPDX-License-Identifier style]
Signed-off-by: Andreas Färber <afaerber@suse.de>
This adds the TVE200/TVC TV-encoder and the Ilitek ILI9322 panel
to the DIR-685 device tree.
This brings graphics to this funky router and it is possible to
even run a console on its tiny screen.
Incidentally this requires us to disable the access to the
parallel (NOR) flash, as the communication pins to the panel
are shared with the flash memory.
To access the flash, a separate kernel with the panel disabled
and the flash enabled should be booted. The pin control selecting
whether to use the lines cannot be altered at runtime due to
hardware constraints.
Cc: David Lechner <david@lechnology.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Ben Dooks <ben.dooks@codethink.co.uk>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
These GPIOs are used in open drain mode, so make sure to
flag them as such. Use the new separate scl/sda line
GPIO bindings.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Add the missing clock to CA7 CPU1 node.
Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Reviewed-by: Chris Paterson <Chris.Paterson2@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
dtc points out that the parent node of the interrupt controllers is not
actually an interrupt controller itself, and lacks an #interrupt-cells
property:
arch/arm/boot/dts/tango4-vantage-1172.dtb: Warning (interrupts_property): Missing #interrupt-cells in interrupt-parent /soc/interrupt-controller@6e000
This removes the annotation.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
dtc warns about two 'clocks' properties that have an extraneous '1'
at the end:
arch/arm/boot/dts/ls1021a-qds.dtb: Warning (clocks_property): arch/arm/boot/dts/ls1021a-twr.dtb: Warning (clocks_property): Property 'clocks', cell 1 is not a phandle reference in /soc/i2c@2180000/mux@77/i2c@4/sgtl5000@2a
arch/arm/boot/dts/ls1021a-qds.dtb: Warning (clocks_property): Missing property '#clock-cells' in node /soc/interrupt-controller@1400000 or bad phandle (referred from /soc/i2c@2180000/mux@77/i2c@4/sgtl5000@2a:clocks[1])
Property 'clocks', cell 1 is not a phandle reference in /soc/i2c@2190000/sgtl5000@a
arch/arm/boot/dts/ls1021a-twr.dtb: Warning (clocks_property): Missing property '#clock-cells' in node /soc/interrupt-controller@1400000 or bad phandle (referred from /soc/i2c@2190000/sgtl5000@a:clocks[1])
The clocks that get referenced here are fixed-rate, so they do not
take any argument, and dtc interprets the next cell as a phandle, which
is invalid.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-----BEGIN PGP SIGNATURE-----
iQFEBAABCAAuFiEE7v+35S2Q1vLNA3Lx86Z5yZzRHYEFAlo7+7IQHGhlaWtvQHNu
dGVjaC5kZQAKCRDzpnnJnNEdgWKzCACiOs6rif6zIG6hBl29S5q8BGIwD1K234Br
4u05OIUzlol41p0cp5wBBuYyUd9jQdXhYVZLVk+iKsygOJEZY/u1jKa1gy6nVQxu
Uqb3CgVq0QjbGIMWEIssOE2oML4Rhgx9dmMhVoVYgP+A1yFiGRnevp0ZKlYc+iHM
kqaZfno2WWBARgLMuJ90kyaZhUSyjweWi3rJiFCc5Hx0oeX/ENKFyI0NftUfjkD1
2bgDAkRiOK4ieK8LqM1BbUvhKPvEP5mR/hZsqa7AykXf+oYKk9ZAxoXx2EndyCN0
dbQppp4fqvWusTDP+xi1lrEq5JVhPHuBtcR1ntzfSOF1D3K00PA8
=b8Nk
-----END PGP SIGNATURE-----
Merge tag 'v4.16-rockchip-dts32-1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into next/dt
Pull "Rockchip dts32 changes for 4.16" from Heiko Stübner:
Just the reset property for the rk3066a-rayeager emac phy
* tag 'v4.16-rockchip-dts32-1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
ARM: dts: rockchip: add reset property for rk3066a-rayeager emac phy
Add and enable the sdhci2 slot and the pinctrl configuration.
Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
- update mmc nodes for mt7623
- mt7623 change mmc card detection pin to active low
- mt7623 set unit address to lower case
-----BEGIN PGP SIGNATURE-----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=d/4Y
-----END PGP SIGNATURE-----
Merge tag 'v4.15-next-dts32' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux into next/dt
Pull "arm: Updates of armv7 DTS for v4.15-next" from Matthias Brugger:
- add reset cells mt2701 and mt7623 ethsys
- update mmc nodes for mt7623
- mt7623 change mmc card detection pin to active low
- mt7623 set unit address to lower case
* tag 'v4.15-next-dts32' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux:
dt-bindings: ARM: Mediatek: Fix ethsys documentation
arm: mt7: dts: Remove leading 0x and 0s from bindings notation
arm: dts: mt7623: fix card detection issue on bananapi-r2
arm: dts: mt7623: update mmc related nodes with the appropriate fallback
arm: dts: mt2701: Add reset-cells
arm: dts: mt7623: Update ethsys binding
These changes enable the video decoder engine found on Tegra20 SoCs.
-----BEGIN PGP SIGNATURE-----
iQJHBAABCAAxFiEEiOrDCAFJzPfAjcif3SOs138+s6EFAlo6toITHHRyZWRpbmdA
bnZpZGlhLmNvbQAKCRDdI6zXfz6zoYs+D/4sVFi9PmWzGv2OwcOfIN8gC2g0sOBl
3bOFKRiLGUtX444RngWqykHP9Ug8txdRQ6PgGyZMWyTzC2jX61gwNhhIB1ZSpzPq
+2PwIawhxeu6gjcZZUdMvuG4Y5RFp2X5ZjxrQWsoUxkgOcKKyAnNd2cNT5h3bHyq
XF7YfvmzxzaV/BqEjqpm9Ob+afEwx19CX8lzkMUV7JX59SnFt4CFXkbw3vOyn19R
FH9tlRigNBpUkMJZ7lHGsRHVy6jd8QLEcqmq2gfLaIcgpICivzdxjyumRl6HBnaj
rL/02Kw2eTWBsySss+L+kZDF6RvO4mYv+2NsOtHfYlkAhY+Cmm2ermGY0rluk+B8
0G7R0Q/O+oqrMYRHX0SG8BjsYMMvODHxYzuRTEPEKfplJEiz25sZHyjQj58BsNa5
j02uwnrDZOTT0uJ0aJm6H5RCOZKK43sog25XRIXVIS3f0k2KqjLYAMlc40nYGveU
8mB3BzQeIGLQbwm5Y+istn9+M3oCJ52qLRjBxeLC7q9IyyHL2/dL/aMGMVT9bstx
jFuf6NBMtlbUmiFfNXMjgY6Bs3+ghX7lVb6A3h03XEFSlpTMx69VUxfuIFvIlIeQ
RKO7VmZ0iiuE5e79QQ9OQHrFKnxAGEbfQyLnY8+xJ+sd2l4kOmgzxqHoSvDY58ZU
6LEHm1C2RjGlXQ==
=bS8w
-----END PGP SIGNATURE-----
Merge tag 'tegra-for-4.16-arm-dt' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tegra/linux into next/dt
Pull "ARM: tegra: Device tree changes for v4.16-rc1" from Thierry Reding:
These changes enable the video decoder engine found on Tegra20 SoCs.
* tag 'tegra-for-4.16-arm-dt' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
ARM: tegra: Add video decoder on Tegra20
ARM: tegra: Add device tree node to describe IRAM on Tegra20
1. Add sound support to Odroid XU4 (and adjustments to Odroid XU3).
2. Enable WiFi on Trats2.
3. Add CPU perf counters to Exynos54xx.
4. Add power domains to certain chipsets.
5. Add Exynos4412 ISP clock controller which finally solves freezes when
accessing ISP clocks while having the ISP power domain turned off.
6. Add Pseudo and True RNG to Exynos5.
7. Minor fixes for Trats2, Odroid XU3/XU4, Exynos5410.
8. Cleanup of some of DTC warnings
-----BEGIN PGP SIGNATURE-----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=auEd
-----END PGP SIGNATURE-----
Merge tag 'samsung-dt-4.16' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/krzk/linux into next/dt
Pull "Samsung DTS ARM changes for 4.16" from Krzysztof Kozłowski:
1. Add sound support to Odroid XU4 (and adjustments to Odroid XU3).
2. Enable WiFi on Trats2.
3. Add CPU perf counters to Exynos54xx.
4. Add power domains to certain chipsets.
5. Add Exynos4412 ISP clock controller which finally solves freezes when
accessing ISP clocks while having the ISP power domain turned off.
6. Add Pseudo and True RNG to Exynos5.
7. Minor fixes for Trats2, Odroid XU3/XU4, Exynos5410.
8. Cleanup of some of DTC warnings
* tag 'samsung-dt-4.16' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
ARM: dts: exynos: Use lower case hex addresses in node unit addresses
ARM: dts: exynos: Add nodes for True Random Number Generator
ARM: dts: exynos: Add DT nodes for PRNG in Exynos5 SoCs
ARM: dts: exynos: Add G3D power domain to Exynos5250
ARM: dts: exynos: Add audio power domain to Exynos5250
ARM: dts: exynos: Fix power domain node names for Exynos5250
ARM: dts: exynos: Add missing interrupt-controller properties to Exynos5410 PMU
ARM: dts: exynos: Add audio power domain support to Exynos542x SoCs
ARM: dts: exynos: Fix property values of LDO15/17 for Odroid XU3/XU4
ARM: dts: exynos: Add Exynos4412 ISP clock controller
ARM: dts: exynos: Move G2D node to exynos5.dtsi
ARM: dts: exynos: Add CPU perf counters to Exynos54xx boards
ARM: dts: exynos: Remove duplicate definitions of SSS nodes for Exynos5
ARM: dts: exynos: Add bcm4334 device node to Trats2
ARM: dts: exynos: Correct Trats2 panel reset line
ARM: dts: exynos: Add sound support for Odroid XU4
ARM: dts: exynos: Switch to dedicated Odroid XU3 sound card binding
-----BEGIN PGP SIGNATURE-----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=10ji
-----END PGP SIGNATURE-----
Merge tag 'gemni-dts-1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik into next/dt
Gemini DTS updates, take one
* tag 'gemni-dts-1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik:
ARM: dts: Add basic devicetree for D-Link DNS-313
ARM: dts: Add ethernet PHYs to the a bunch of Geminis
These changes are mostly improvments for various devices.
Note that these are based on my earlier fixes branch
omap-for-v4.15/fixes-dt to avoid a pointless merge conflict
between a fix and removal. The summary of changes is:
- Fix audio codec reset pin for am335x-pepper and n900, this
has been always broken and won't get fixed until the related
driver changes are also merged in for v4.16, so not urgent
- Fix tps65917 powerhold property for dra76-evm
- Changes to logicpd boards to remove MTD partition information
and to add support for omap35xx variants by setting up common
dts files for the logicpd boards
- Disable dra7 USB metastability workaround, this won't do
anything until the related driver changes are also merged
into v4.16, so not urgent
-----BEGIN PGP SIGNATURE-----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=jzFR
-----END PGP SIGNATURE-----
Merge tag 'omap-for-v4.16/dt-signed' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/dt
Pull "Dts related changes for omaps for v4.16 merge window" from Tony
Lindgren:
These changes are mostly improvments for various devices.
Note that these are based on my earlier fixes branch
omap-for-v4.15/fixes-dt to avoid a pointless merge conflict
between a fix and removal. The summary of changes is:
- Fix audio codec reset pin for am335x-pepper and n900, this
has been always broken and won't get fixed until the related
driver changes are also merged in for v4.16, so not urgent
- Fix tps65917 powerhold property for dra76-evm
- Changes to logicpd boards to remove MTD partition information
and to add support for omap35xx variants by setting up common
dts files for the logicpd boards
- Disable dra7 USB metastability workaround, this won't do
anything until the related driver changes are also merged
into v4.16, so not urgent
* tag 'omap-for-v4.16/dt-signed' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: dts: Move move WiFi bindings to logicpd-torpedo-37xx-devkit
ARM: dts: Add minimal support for LogicPD OMAP35xx Torpedo devkit
ARM: dts: Move most of logicpd-torpedo-37xx-devkit to logicpd-torpedo-baseboard
ARM: dts: Add minimal support for LogicPD OMAP35xx SOM-LV devkit
ARM: dts: Move most of logicpd-som-lv-37xx-devkit.dts to logicpd-som-lv-baseboard.dtsi
ARM: dts: dra7: Add missing hdmi audio DMA channel information
ARM: dts: dra7: Disable USB metastability workaround for USB2
ARM: dts: omap3: logicpd kits: Remove partition information
ARM: dts: DRA76-EVM: Set powerhold property for tps65917
ARM: dts: omap3-n900: Fix the audio CODEC's reset pin
ARM: dts: am335x-pepper: Fix the audio CODEC's reset pin
This branch contains a series of dts changes from Tero Kristo to
start using clkctrl clocks.
Note that this branch is based on a merge of omap-for-v4.16/soc-signed
and an immutable commit from Tero Kristo fe7020e64f04 ("clk: ti: omap4:
clkctrl data fixes for opt-clocks") that is also in clk-next.
-----BEGIN PGP SIGNATURE-----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=uhHY
-----END PGP SIGNATURE-----
Merge tag 'omap-for-v4.16/dt-clk-signed' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/dt
Pull "Clock related dts changes for omaps for v4.16 merge window" from
Tony Lindgren:
This branch contains a series of dts changes from Tero Kristo to
start using clkctrl clocks.
Note that this branch is based on a merge of omap-for-v4.16/soc-signed
and an immutable commit from Tero Kristo fe7020e64f04 ("clk: ti: omap4:
clkctrl data fixes for opt-clocks") that is also in clk-next.
* tag 'omap-for-v4.16/dt-clk-signed' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: (57 commits)
ARM: dts: dm816x: add clkctrl nodes
ARM: dts: dm814x: add clkctrl nodes
ARM: dts: am43xx: add clkctrl nodes
ARM: dts: am33xx: add clkctrl nodes
ARM: dts: dra7: add clkctrl nodes
ARM: dts: omap5: add clkctrl nodes
ARM: dts: omap4: add clkctrl nodes
ARM: dts: dm816x: add bus functionality to base PRCM node
ARM: dts: am43xx: add bus functionality to base PRCM node
ARM: dts: am33xx: add bus functionality to base PRCM node
ARM: dts: dra7: add bus functionality to base PRCM nodes
ARM: dts: omap4: add bus functionality to base PRCM nodes
ARM: dts: omap5: add bus functionality to base PRCM nodes
ARM: dts: dm816x: add fck under timers1/2
ARM: dts: dm814x: add fck under timers1/2
ARM: dts: dra7: add fck under timer1
ARM: dts: am43xx: add fck under timers1/2
ARM: dts: am33xx: add fck under timers1/2
ARM: dts: omap4: add fck under timer1
ARM: dts: omap5: add fck under timer1
...
work on DM365 and a fix for battery voltage monitoring on Lego EV3.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=GZm0
-----END PGP SIGNATURE-----
Merge tag 'davinci-fixes-for-v4.15' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci into fixes
Pull "TI DaVinci fixes for v4.15" from Sekhar Nori:
DaVinci fixes for v4.15 consiting of fixes to make EDMA and MMC/SD
work on DM365 and a fix for battery voltage monitoring on Lego EV3.
* tag 'davinci-fixes-for-v4.15' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci:
ARM: davinci: fix mmc entries in dm365's dma_slave_map
ARM: dts: da850-lego-ev3: Fix battery voltage gpio
ARM: davinci: Add dma_mask to dm365's eDMA device
ARM: davinci: Use platform_device_register_full() to create pdev for dm365's eDMA
on the rk3066a-marsboard to make it not fail from cpufreq changes.
-----BEGIN PGP SIGNATURE-----
iQFEBAABCAAuFiEE7v+35S2Q1vLNA3Lx86Z5yZzRHYEFAlosSE4QHGhlaWtvQHNu
dGVjaC5kZQAKCRDzpnnJnNEdgRhMCACXcPJmWvjPRQwrpFrFOrHUfgsku46CFl2a
AWmN5wGB2pStM1R/1HsfrfO0YXb5e9UESEwyQzb1/DEoAnES5aFrZqnuPSSHr/9W
cZR8fDRk69cxMILdCy25xmWeAmhPTJUWTPwdhfSkINmf0+DcPehKr97xVyzEcVK3
LMczvzPUSuipciQbVdR8bTkVy05ToHJctN+ri3Ux9SqrGZcW86W/v5mRnRVxxvXU
NcdEIB1/IC9nHPYYRJbUvrEgLIzHt21KkS3GEmCI3kf4t7qsY28VkVfsoqrIQMA9
/ennO0r6df+7sSzQXI25lERWMHk+gSSlq4z3jguI6b8NmAFBynMh
=CZn2
-----END PGP SIGNATURE-----
Merge tag 'v4.15-rockchip-dts32fixes-1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into fixes
Pull "Rockchip dts32 fixes for 4.15" from Heiko Stübner:
Removed another trailing interrupt-cell 0 and added the cpu regulator
on the rk3066a-marsboard to make it not fail from cpufreq changes.
* tag 'v4.15-rockchip-dts32fixes-1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
ARM: dts: rockchip: fix rk3288 iep-IOMMU interrupts property cells
ARM: dts: rockchip: add cpu0-regulator on rk3066a-marsboard
After ti-opp-supply driver is in place to provide AVS Class0 and abb
regulator scaling support let's enable 1.5GHz for the cpu.
Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Add the OPP supply node for the MPU voltage rail to provide the
information needed by the ti-opp-supply driver to enable AVS Class 0.
Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Add a vbb-supply phandle to the cpus node and also add an additional
triplet of voltages for each OPP in the operating-points-v2 table to
make use of the multi regulator support in the OPP core and provide the
vbb regulator for use by the ti-opp-supply driver.
Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Otherwise we cannot use generic OF_DEV_AUXDATA match without listing
all the compatibles separately for OF_DEV_AUXDATA. Let's also update the
binding accordingly.
Let's also fix omap4.dtsi to use "ti,sysc-omap4-sr" compatible as we
have documented in the binding. This was not noticed earlier as we're
still probing SmartReflex driver with platform data.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
This should have always been 8.
Fixes: db4d6d9d80fa ("ARM: dts: aspeed: Correctly order UART nodes")
Cc: stable@vger.kernel.org
Signed-off-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
BeagleBone Blue: can: enable the dedicated can connector.
Signed-off-by: Robert Nelson <robertcnelson@gmail.com>
Cc: Jason Kridner <jkridner@beagleboard.org>
Cc: Drew Fustini <drew@beagleboard.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
BeagleBone Blue: usarts: enable all the dedicated usart connectors.
DSM2/uart4: on the Blue, this is a recieve only interface.
Signed-off-by: Robert Nelson <robertcnelson@gmail.com>
Cc: Jason Kridner <jkridner@beagleboard.org>
Cc: Drew Fustini <drew@beagleboard.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Use the correct IRQ gpio pin on the BeagleBone Blue to allow the
wl1835 wireless module to actually work.
Signed-off-by: Robert Nelson <robertcnelson@gmail.com>
Cc: Jason Kridner <jkridner@beagleboard.org>
Cc: Drew Fustini <drew@beagleboard.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Since SoC specific compatible strings are used for PCIe in
dra74x.dtsi and dra72x.dtsi, remove the compatible property
from dra7.dtsi which uses the deprecated compatible string.
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
DRA76 EVM has a 4-lane PCIe connector and DRA76 can support x2 lanes.
Enable both the PCIe lanes here.
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Use dra72 specific compatible string for PCIe while preserving
the older compatible.
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Use dra74 specific compatible string for PCIe while preserving
the older compatible. While at that add a new label for the
2nd instance of pcie.
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
ti,syscon-lane-sel and ti,syscon-lane-conf properties specific to enable
PCIe x2 lane mode are added here.
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
am574x-idk is similar to am572x-idk with am574x SoC. So create
a common file for both evms and include SoC dtsi as needed.
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
AM437x IDK has a TPS386000 supply voltage supervisor on the VDD_MPU rail
set to trigger undervoltage condition at 0.96V. Because of this, OPP50,
which is normally configured to 300MHz at 0.95V, must be disabled to
avoid triggering the undervoltage condition. Also mark OPP100 as the
suspend-opp as it is now our lowest OPP.
Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
We can remove the unnecessary "omapdss," prefix because
the omapdrm driver takes care of it when matching with
the driver table.
Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
* Convert to named i2c-gpio bindings
Geert Uytterhoeven says "Commits 7d29f509d2cfd807 ("dt-bindings: i2c:
i2c-gpio: Add support for named gpios") and 05c74778858d7d99 ("i2c: gpio:
Add support for named gpios in DT") introduced named i2c-gpio DT
bindings, and deprecated the more error-prone unnamed variant.
This patch series switches all Renesas boards to the new bindings, and
adds the missing GPIO_OPEN_DRAIN I/O flags, which were implicitly
assumed before..."
... Note that after this series is applied, the i2c-gpio buses are no
longer detected when booting new DTBs on old (v4.14 and older) kernels,
which should not be an issue. Booting old DTBs on new kernels is not
affected."
* Update DTS for CMT DT binding rework
Geert Uytterhoeven says "This patch series updates the CMT device nodes
in the various Renesas DTS files sh_cmt clocksource driver for the recent
DT binding rework that was merged in v4.14-rc1 and v4.15-rc1..."
* Add SMP support to r8a7794 (R-Car E2) SoC
Sergei Shtylyov says "Add the device tree node for the Advanced Power
Management Unit (APMU). Use the "enable-method" prop to point out that
the APMU should be used for the SMP support."
* Correct primary compatible value for eeprom
on r7s72100 (RZ/A1H) genmai and r8a7791 (R-Car M2-W) koelsh boards
Geert Uytterhoeven says "The Renesas part numbers of the two-wire serial
interface EEPROMs do not follow the 24Cxx pattern, but the R1EX24xxx
pattern.
Hence change the primary compatible values to the appropriate variant of
"renesas,r1ex24xxx", like is already done on Gose.""
* Move cec_clock to root node on r8a7791 (R-Car M2-W) koelsh board
r8a7791 (R-Car M2-W) koelsh board
* Use R-Car SDHI and Ether Gen1 and 2 fallback compat strings
Use recently posted R-Car SDHI and Ether Gen 1 and 2 fallback
compat strings in the DT of Renesas ARM based SoCs.
* Add IIC cores to dtsi of r8a7745 (RZ/G1E) SoC
* Rework DT architecture for r8a7745 (RZ/G1E) iW-RainboW-G22D development
platform and add serial support.
Fabrizio Castro says "... define a new DT architecture for the
iW-RainboW-G22D SODIMM Development Platform to include the configuration
with the HDMI daughter board and to define the serial interfaces."
* Add USB function support to
r8a7745 (RZ/G1E) iW-RainboW-G22D development platform
* Add PCIEC and ttySC3 support to r8a7743 (RZ/G1M) iW-RainboW-G20M-Qseven SoM
* Add VIN support to r8a7743 (RZ/G1M) and r8a7745 (RZ/G1E) SoCs
* Add CAN and HDMI support to r8a7743 (RZ/G1M) iW-RainboW-G20D-Qseven and
r8a7745 (RZ/G1E) iW-RainboW-G22D development platforms
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEE4nzZofWswv9L/nKF189kaWo3T74FAlonxA0ACgkQ189kaWo3
T76EtA//RMlwBDrH9XbrrPEtMePSTsXisKQPooYV/NOO1RcvAZjSILtzmdzpwipr
pm8Ogdou6E3dX0i0+OnZRw+62apaK0xt0tuRf4ayxfKCWhqWnTpFOf8icNyXbQ0w
fr0Q//lPdAEW5+qD15dAtbASqQqUntgsCldQHXS8+KlLEs9BHfZxU9Myyqr+pJHH
+7C6Jwy68bSvhIxtbJRNbkA4jj464Tcy0OsDJdNktEduGPel7llew+Zv3WI/dpoL
Q0BMbkpTUctK6VuYvJZt7RlKwkOpW7xlePi4SP87AnUYnYHhYQAA5Lz+uJIv4EVq
0SQadPbXnDl9BtTrKXPmWLIYG+OTh4mx1Gf49dvmh2737NydbSzbam3DprgJW6+T
lsyAMvU/LWgdRv8wuZfS6EJ63UjPRqq0siZdWYQX7vEXveIgjVrY3yF6av8RJJhy
YRnvKx2oASo/+uskBs8EY73yIPPiQO3KBdCTRwOOtllQo7lTXaM6s2pmNWfkJjm8
xXBo2V6/qLEwBnT4MEPGEM+uj4kiRKtWDwmVtb+YqDEH3l4ztyVfjOgw+DZj5XnC
jo6253AIHAY90XXapKqgXJ20+Xb4JfmPYPsU/t2sGrWKNA/IahPxI3QbXDpdgCH0
alAiohPojdbR+zOynPKNTZC5/DwYOGcKfsyh5ClXCAmY7yFhGtM=
=Yk5x
-----END PGP SIGNATURE-----
Merge tag 'renesas-dt-for-v4.16' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/dt
Pull "Renesas ARM Based SoC DT Updates for v4.16" from Simon Horman:
* Convert to named i2c-gpio bindings
Geert Uytterhoeven says "Commits 7d29f509d2cfd807 ("dt-bindings: i2c:
i2c-gpio: Add support for named gpios") and 05c74778858d7d99 ("i2c: gpio:
Add support for named gpios in DT") introduced named i2c-gpio DT
bindings, and deprecated the more error-prone unnamed variant.
This patch series switches all Renesas boards to the new bindings, and
adds the missing GPIO_OPEN_DRAIN I/O flags, which were implicitly
assumed before..."
... Note that after this series is applied, the i2c-gpio buses are no
longer detected when booting new DTBs on old (v4.14 and older) kernels,
which should not be an issue. Booting old DTBs on new kernels is not
affected."
* Update DTS for CMT DT binding rework
Geert Uytterhoeven says "This patch series updates the CMT device nodes
in the various Renesas DTS files sh_cmt clocksource driver for the recent
DT binding rework that was merged in v4.14-rc1 and v4.15-rc1..."
* Add SMP support to r8a7794 (R-Car E2) SoC
Sergei Shtylyov says "Add the device tree node for the Advanced Power
Management Unit (APMU). Use the "enable-method" prop to point out that
the APMU should be used for the SMP support."
* Correct primary compatible value for eeprom
on r7s72100 (RZ/A1H) genmai and r8a7791 (R-Car M2-W) koelsh boards
Geert Uytterhoeven says "The Renesas part numbers of the two-wire serial
interface EEPROMs do not follow the 24Cxx pattern, but the R1EX24xxx
pattern.
Hence change the primary compatible values to the appropriate variant of
"renesas,r1ex24xxx", like is already done on Gose.""
* Move cec_clock to root node on r8a7791 (R-Car M2-W) koelsh board
r8a7791 (R-Car M2-W) koelsh board
* Use R-Car SDHI and Ether Gen1 and 2 fallback compat strings
Use recently posted R-Car SDHI and Ether Gen 1 and 2 fallback
compat strings in the DT of Renesas ARM based SoCs.
* Add IIC cores to dtsi of r8a7745 (RZ/G1E) SoC
* Rework DT architecture for r8a7745 (RZ/G1E) iW-RainboW-G22D development
platform and add serial support.
Fabrizio Castro says "... define a new DT architecture for the
iW-RainboW-G22D SODIMM Development Platform to include the configuration
with the HDMI daughter board and to define the serial interfaces."
* Add USB function support to
r8a7745 (RZ/G1E) iW-RainboW-G22D development platform
* Add PCIEC and ttySC3 support to r8a7743 (RZ/G1M) iW-RainboW-G20M-Qseven SoM
* Add VIN support to r8a7743 (RZ/G1M) and r8a7745 (RZ/G1E) SoCs
* Add CAN and HDMI support to r8a7743 (RZ/G1M) iW-RainboW-G20D-Qseven and
r8a7745 (RZ/G1E) iW-RainboW-G22D development platforms
* tag 'renesas-dt-for-v4.16' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/horms/renesas: (61 commits)
ARM: dts: alt: Convert to named i2c-gpio bindings
ARM: dts: koelsch: Convert to named i2c-gpio bindings
ARM: dts: lager: Convert to named i2c-gpio bindings
ARM: dts: armadillo800eva: Convert to named i2c-gpio bindings
ARM: dts: sh73a0: Remove CMT renesas,channels-mask
ARM: dts: r8a7794: Remove CMT renesas,channels-mask
ARM: dts: r8a7793: Remove CMT renesas,channels-mask
ARM: dts: r8a7791: Remove CMT renesas,channels-mask
ARM: dts: r8a7790: Remove CMT renesas,channels-mask
ARM: dts: r8a7740: Remove CMT renesas,channels-mask
ARM: dts: r8a73a4: Remove CMT renesas,channels-mask
ARM: dts: r8a7794: Update CMT compat strings
ARM: dts: r8a7793: Update CMT compat strings
ARM: dts: r8a7791: Update CMT compat strings
ARM: dts: r8a7790: Update CMT compat strings
ARM: dts: r8a73a4: Update CMT compat string
ARM: dts: r8a7794: Add SMP support
ARM: dts: genmai: Correct primary compatible value for eeprom
ARM: dts: koelsch: Correct primary compatible value for eeprom
ARM: dts: r8a7745: add VIN dt support
...
ARCH_S3C24XX is a very exceptional platform that some DT files in
arch/arm/boot/dts/, but does not select USE_OF.
All the other platforms with DT files correctly select USE_OF
directly or indirectly (Most of them are either ARCH_MULTIPLATFORM
or ARM_SINGLE_ARMV7M).
With ARCH_S3C24XX fixed, "ifeq ($(CONFIG_OF),y)" in DT Makefile
can be deleted.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Commit 1cb686c08d12 ("ARM: dts: exynos: Add status property to Exynos 542x
Mixer nodes") disabled the Mixer node by default in the DTSI and enabled
for each Exynos 542x DTS. But unfortunately it missed to enable it for the
Exynos5800 Peach Pi machine, since the 5800 is also an 542x SoC variant.
Fixes: 1cb686c08d12 ("ARM: dts: exynos: Add status property to Exynos 542x Mixer nodes")
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Acked-by: Marek Szyprowski <m.szyprowski@samsung.com>
Tested-by: Guillaume Tucker <guillaume.tucker@collabora.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The at24 driver allows to register I2C EEPROM chips using different vendor
and devices, but the I2C subsystem does not take the vendor into account
when matching using the I2C table since it only has device entries.
But when matching using an OF table, both the vendor and device has to be
taken into account so the driver defines only a set of compatible strings
using the "atmel" vendor as a generic fallback for compatible I2C devices.
So add this generic fallback to the device node compatible string to make
the device to match the driver using the OF device ID table.
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The at24 driver allows to register I2C EEPROM chips using different vendor
and devices, but the I2C subsystem does not take the vendor into account
when matching using the I2C table since it only has device entries.
But when matching using an OF table, both the vendor and device has to be
taken into account so the driver defines only a set of compatible strings
using the "atmel" vendor as a generic fallback for compatible I2C devices.
So add this generic fallback to the device node compatible string to make
the device to match the driver using the OF device ID table.
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The at24 driver allows to register I2C EEPROM chips using different vendor
and devices, but the I2C subsystem does not take the vendor into account
when matching using the I2C table since it only has device entries.
But when matching using an OF table, both the vendor and device has to be
taken into account so the driver defines only a set of compatible strings
using the "atmel" vendor as a generic fallback for compatible I2C devices.
So add this generic fallback to the device node compatible string to make
the device to match the driver using the OF device ID table.
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Official vendor string is now "tpo" and not "toppoly".
Requires patch "omapdrm: panel: fix compatible vendor string for td028ttec1"
so that the driver understands both.
Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Add basic panel support for the Nokia N950. It must be tweaked a
little bit later, since the panel was built into the device
upside-down. Also the first 5 and the last 5 pixels are covered
by plastic.
Signed-off-By: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Tony Lindgren <tony@atomide.com>
