IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Explain why STIBP is needed with legacy IBRS as currently implemented
(KERNEL_IBRS) and why STIBP is not needed when enhanced IBRS is enabled.
Fixes: 7c693f54c873 ("x86/speculation: Add spectre_v2=ibrs option to support Kernel IBRS")
Signed-off-by: KP Singh <kpsingh@kernel.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20230227060541.1939092-2-kpsingh@kernel.org
where possible, when supporting a debug registers swap feature for
SEV-ES guests
- Add support for AMD's version of eIBRS called Automatic IBRS which is
a set-and-forget control of indirect branch restriction speculation
resources on privilege change
- Add support for a new x86 instruction - LKGS - Load kernel GS which is
part of the FRED infrastructure
- Reset SPEC_CTRL upon init to accomodate use cases like kexec which
rediscover
- Other smaller fixes and cleanups
-----BEGIN PGP SIGNATURE-----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=v/ZC
-----END PGP SIGNATURE-----
Merge tag 'x86_cpu_for_v6.3_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 cpuid updates from Borislav Petkov:
- Cache the AMD debug registers in per-CPU variables to avoid MSR
writes where possible, when supporting a debug registers swap feature
for SEV-ES guests
- Add support for AMD's version of eIBRS called Automatic IBRS which is
a set-and-forget control of indirect branch restriction speculation
resources on privilege change
- Add support for a new x86 instruction - LKGS - Load kernel GS which
is part of the FRED infrastructure
- Reset SPEC_CTRL upon init to accomodate use cases like kexec which
rediscover
- Other smaller fixes and cleanups
* tag 'x86_cpu_for_v6.3_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/amd: Cache debug register values in percpu variables
KVM: x86: Propagate the AMD Automatic IBRS feature to the guest
x86/cpu: Support AMD Automatic IBRS
x86/cpu, kvm: Add the SMM_CTL MSR not present feature
x86/cpu, kvm: Add the Null Selector Clears Base feature
x86/cpu, kvm: Move X86_FEATURE_LFENCE_RDTSC to its native leaf
x86/cpu, kvm: Add the NO_NESTED_DATA_BP feature
KVM: x86: Move open-coded CPUID leaf 0x80000021 EAX bit propagation code
x86/cpu, kvm: Add support for CPUID_80000021_EAX
x86/gsseg: Add the new <asm/gsseg.h> header to <asm/asm-prototypes.h>
x86/gsseg: Use the LKGS instruction if available for load_gs_index()
x86/gsseg: Move load_gs_index() to its own new header file
x86/gsseg: Make asm_load_gs_index() take an u16
x86/opcode: Add the LKGS instruction to x86-opcode-map
x86/cpufeature: Add the CPU feature bit for LKGS
x86/bugs: Reset speculation control settings on init
x86/cpu: Remove redundant extern x86_read_arch_cap_msr()
- Rework a large bunch of drivers to use the generic thermal trip
structure and use the opportunity to do more cleanups by removing
unused functions from the OF code (Daniel Lezcano).
- Remove core header inclusion from drivers (Daniel Lezcano).
- Fix some locking issues related to the generic thermal trip rework
(Johan Hovold).
- Fix a crash when requesting the critical temperature on tegra, which
is related to the generic trip point work (Jon Hunter).
- Clean up thermal device unregistration code (Viresh Kumar).
- Fix and clean up thermal control core initialization error code
paths (Daniel Lezcano).
- Relocate the trip points handling code into a separate file (Daniel
Lezcano).
- Make the thermal core fail registration of thermal zones and cooling
devices if the thermal class has not been registered (Rafael Wysocki).
- Add trip point initialization helper functions for ACPI-defined trip
points and modify two thermal drivers to use them (Rafael Wysocki,
Daniel Lezcano).
- Make the core thermal control code use sysfs_emit_at() instead of
scnprintf() where applicable (ye xingchen).
- Consolidate code accessing the Intel TCC (Thermal Control Circuitry)
MSRs by introducing library functions for that and making the
TCC-related code in thermal drivers use them (Zhang Rui).
- Enhance the x86_pkg_temp_thermal driver to support dynamic tjmax
changes (Zhang Rui).
- Address an "unsigned expression compared with zero" warning in the
intel_soc_dts_iosf thermal driver (Yang Li).
- Update comments regarding two functions in the Intel Menlow thermal
driver (Deming Wang).
- Use sysfs_emit_at() instead of scnprintf() in the int340x thermal
driver (ye xingchen).
- Make the intel_pch thermal driver support the Wellsburg PCH (Tim
Zimmermann).
- Modify the intel_pch and processor_thermal_device_pci thermal drivers
use generic trip point tables instead of thermal zone trip point
callbacks (Daniel Lezcano).
- Add production mode attribute sysfs attribute to the int340x thermal
driver (Srinivas Pandruvada).
- Rework dynamic trip point updates handling and locking in the int340x
thermal driver (Rafael Wysocki).
- Make the int340x thermal driver use a generic trip points table
instead of thermal zone trip point callbacks (Rafael Wysocki, Daniel
Lezcano).
- Clean up and improve the int340x thermal driver (Rafael Wysocki).
- Simplify and clean up the intel_pch thermal driver (Rafael Wysocki).
- Fix the Intel powerclamp thermal driver and make it use the common
idle injection framework (Srinivas Pandruvada).
- Add two module parameters, cpumask and max_idle, to the Intel powerclamp
thermal driver to allow it to affect only a specific subset of CPUs
instead of all of them (Srinivas Pandruvada).
- Make the Intel quark_dts thermal driver Use generic trip point
objects instead of its own trip point representation (Daniel
Lezcano).
- Add toctree entry for thermal documents and fix two issues in the
Intel powerclamp driver documentation (Bagas Sanjaya).
- Use strscpy() to instead of strncpy() in the thermal core (Xu Panda).
- Fix thermal_sampling_exit() (Vincent Guittot).
- Add Mediatek Low Voltage Thermal Sensor (LVTS) driver (Balsam Chihi).
- Add r8a779g0 RCar support to the rcar_gen3 thermal driver (Geert
Uytterhoeven).
- Fix useless call to set_trips() when resuming in the rcar_gen3
thermal control driver and add interrupt support detection at init
time to it (Niklas Söderlund).
- Fix memory corruption in the hi3660 thermal driver (Yongqin Liu).
- Fix include path for libnl3 in pkg-config file for libthermal (Vibhav
Pant).
- Remove syscfg-based driver for st as the platform is not supported
any more (Alain Volmat).
-----BEGIN PGP SIGNATURE-----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=tZwm
-----END PGP SIGNATURE-----
Merge tag 'thermal-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull thermal control updates from Rafael Wysocki:
"The majority of changes here are related to the general switch-over to
using arrays of generic trip point structures registered along with a
thermal zone instead of trip point callbacks (this has been done
mostly by Daniel Lezcano with some help from yours truly on the Intel
drivers front).
Apart from that and the related reorganization of code, there are some
enhancements of the existing driver and a new Mediatek Low Voltage
Thermal Sensor (LVTS) driver. The Intel powerclamp undergoes a major
rework so it will use the generic idle_inject facility for CPU idle
time injection going forward and it will take additional module
parameters for specifying the subset of CPUs to be affected by it
(work done by Srinivas Pandruvada).
Also included are assorted fixes and a whole bunch of cleanups.
Specifics:
- Rework a large bunch of drivers to use the generic thermal trip
structure and use the opportunity to do more cleanups by removing
unused functions from the OF code (Daniel Lezcano)
- Remove core header inclusion from drivers (Daniel Lezcano)
- Fix some locking issues related to the generic thermal trip rework
(Johan Hovold)
- Fix a crash when requesting the critical temperature on tegra,
which is related to the generic trip point work (Jon Hunter)
- Clean up thermal device unregistration code (Viresh Kumar)
- Fix and clean up thermal control core initialization error code
paths (Daniel Lezcano)
- Relocate the trip points handling code into a separate file (Daniel
Lezcano)
- Make the thermal core fail registration of thermal zones and
cooling devices if the thermal class has not been registered
(Rafael Wysocki)
- Add trip point initialization helper functions for ACPI-defined
trip points and modify two thermal drivers to use them (Rafael
Wysocki, Daniel Lezcano)
- Make the core thermal control code use sysfs_emit_at() instead of
scnprintf() where applicable (ye xingchen)
- Consolidate code accessing the Intel TCC (Thermal Control
Circuitry) MSRs by introducing library functions for that and
making the TCC-related code in thermal drivers use them (Zhang Rui)
- Enhance the x86_pkg_temp_thermal driver to support dynamic tjmax
changes (Zhang Rui)
- Address an "unsigned expression compared with zero" warning in the
intel_soc_dts_iosf thermal driver (Yang Li)
- Update comments regarding two functions in the Intel Menlow thermal
driver (Deming Wang)
- Use sysfs_emit_at() instead of scnprintf() in the int340x thermal
driver (ye xingchen)
- Make the intel_pch thermal driver support the Wellsburg PCH (Tim
Zimmermann)
- Modify the intel_pch and processor_thermal_device_pci thermal
drivers use generic trip point tables instead of thermal zone trip
point callbacks (Daniel Lezcano)
- Add production mode attribute sysfs attribute to the int340x
thermal driver (Srinivas Pandruvada)
- Rework dynamic trip point updates handling and locking in the
int340x thermal driver (Rafael Wysocki)
- Make the int340x thermal driver use a generic trip points table
instead of thermal zone trip point callbacks (Rafael Wysocki,
Daniel Lezcano)
- Clean up and improve the int340x thermal driver (Rafael Wysocki)
- Simplify and clean up the intel_pch thermal driver (Rafael Wysocki)
- Fix the Intel powerclamp thermal driver and make it use the common
idle injection framework (Srinivas Pandruvada)
- Add two module parameters, cpumask and max_idle, to the Intel
powerclamp thermal driver to allow it to affect only a specific
subset of CPUs instead of all of them (Srinivas Pandruvada)
- Make the Intel quark_dts thermal driver Use generic trip point
objects instead of its own trip point representation (Daniel
Lezcano)
- Add toctree entry for thermal documents and fix two issues in the
Intel powerclamp driver documentation (Bagas Sanjaya)
- Use strscpy() to instead of strncpy() in the thermal core (Xu
Panda)
- Fix thermal_sampling_exit() (Vincent Guittot)
- Add Mediatek Low Voltage Thermal Sensor (LVTS) driver (Balsam
Chihi)
- Add r8a779g0 RCar support to the rcar_gen3 thermal driver (Geert
Uytterhoeven)
- Fix useless call to set_trips() when resuming in the rcar_gen3
thermal control driver and add interrupt support detection at init
time to it (Niklas Söderlund)
- Fix memory corruption in the hi3660 thermal driver (Yongqin Liu)
- Fix include path for libnl3 in pkg-config file for libthermal
(Vibhav Pant)
- Remove syscfg-based driver for st as the platform is not supported
any more (Alain Volmat)"
* tag 'thermal-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (135 commits)
thermal/drivers/st: Remove syscfg based driver
thermal: Remove core header inclusion from drivers
tools/lib/thermal: Fix include path for libnl3 in pkg-config file.
thermal/drivers/hisi: Drop second sensor hi3660
thermal/drivers/rcar_gen3_thermal: Fix device initialization
thermal/drivers/rcar_gen3_thermal: Create device local ops struct
thermal/drivers/rcar_gen3_thermal: Do not call set_trips() when resuming
thermal/drivers/rcar_gen3: Add support for R-Car V4H
dt-bindings: thermal: rcar-gen3-thermal: Add r8a779g0 support
thermal/drivers/mediatek: Add the Low Voltage Thermal Sensor driver
dt-bindings: thermal: mediatek: Add LVTS thermal controllers
thermal/drivers/mediatek: Relocate driver to mediatek folder
tools/lib/thermal: Fix thermal_sampling_exit()
Documentation: powerclamp: Fix numbered lists formatting
Documentation: powerclamp: Escape wildcard in cpumask description
Documentation: admin-guide: Add toctree entry for thermal docs
thermal: intel: powerclamp: Add two module parameters
Documentation: admin-guide: Move intel_powerclamp documentation
thermal: core: Use sysfs_emit_at() instead of scnprintf()
thermal: intel: powerclamp: Fix duration module parameter
...
- Drop port I/O validation for some regions to avoid AML failures due
to rejections of legitimate port I/O writes (Mario Limonciello).
- Constify acpi_get_handle() pathname argument to allow its callers to
pass const pathnames to it (Sakari Ailus).
- Prevent acpi_ns_simple_repair() from crashing in some cases when
AE_AML_NO_RETURN_VALUE should be returned (Daniil Tatianin).
- Fix typo in CDAT DSMAS struct definition (Lukas Wunner).
- Drop an unnecessary (void *) conversion from the ACPI processor
driver (Zhou jie).
- Modify the ACPI processor performance library code to use the "no
limit" frequency QoS as appropriate and adjust the intel_pstate
driver accordingly (Rafael Wysocki).
- Add support for NBFT to the ACPI table parser (Stuart Hayes).
- Introduce list of known non-PNP devices to avoid enumerating some of
them as PNP devices (Rafael Wysocki).
- Add x86 ACPI paths to the ACPI entry in MAINTAINERS to allow scripts
to report the actual maintainers information (Rafael Wysocki).
- Add two more entries to the ACPI IRQ override quirk list (Adam
Niederer, Werner Sembach).
- Add a pmic_i2c_address entry for Intel Bay Trail Crystal Cove to
allow intel_soc_pmic_exec_mipi_pmic_seq_element() to be used with
the Bay Trail Crystal Cove PMIC OpRegion driver (Hans de Goede).
- Add comments with DSDT power OpRegion field names to the ACPI PMIC
driver (Hans de Goede).
- Fix string termination handling in the ACPI battery driver (Armin
Wolf).
- Limit error type to 32-bit width in the ACPI APEI error injection
code (Shuai Xue).
- Fix Lenovo Ideapad Z570 DMI match in the ACPI backlight driver (Hans
de Goede).
- Silence missing prototype warnings in some places in the ACPI-related
code (Ammar Faizi).
- Make kobj_type structures used in the ACPI code constant (Thomas
Weißschuh).
- Correct spelling in firmware-guide/ACPI (Randy Dunlap).
- Clarify the meaning of Explicit and Implicit in the _DSD GPIO
properties documentation (Andy Shevchenko).
- Fix some kernel-doc comments in the ACPI CPPC library code (Yang Li).
-----BEGIN PGP SIGNATURE-----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=BoTs
-----END PGP SIGNATURE-----
Merge tag 'acpi-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI updates from Rafael Wysocki:
"These fix a frequency limit issue in the ACPI processor performance
library code, fix a few issues in the ACPICA code, improve Crystal
Cove support in the ACPI PMIC driver, fix string handling in the ACPI
battery driver, add IRQ override quirks for a few machines more, fix
other assorted problems and clean up code and documentation.
Specifics:
- Drop port I/O validation for some regions to avoid AML failures due
to rejections of legitimate port I/O writes (Mario Limonciello)
- Constify acpi_get_handle() pathname argument to allow its callers
to pass const pathnames to it (Sakari Ailus)
- Prevent acpi_ns_simple_repair() from crashing in some cases when
AE_AML_NO_RETURN_VALUE should be returned (Daniil Tatianin)
- Fix typo in CDAT DSMAS struct definition (Lukas Wunner)
- Drop an unnecessary (void *) conversion from the ACPI processor
driver (Zhou jie)
- Modify the ACPI processor performance library code to use the "no
limit" frequency QoS as appropriate and adjust the intel_pstate
driver accordingly (Rafael Wysocki)
- Add support for NBFT to the ACPI table parser (Stuart Hayes)
- Introduce list of known non-PNP devices to avoid enumerating some
of them as PNP devices (Rafael Wysocki)
- Add x86 ACPI paths to the ACPI entry in MAINTAINERS to allow
scripts to report the actual maintainers information (Rafael
Wysocki)
- Add two more entries to the ACPI IRQ override quirk list (Adam
Niederer, Werner Sembach)
- Add a pmic_i2c_address entry for Intel Bay Trail Crystal Cove to
allow intel_soc_pmic_exec_mipi_pmic_seq_element() to be used with
the Bay Trail Crystal Cove PMIC OpRegion driver (Hans de Goede)
- Add comments with DSDT power OpRegion field names to the ACPI PMIC
driver (Hans de Goede)
- Fix string termination handling in the ACPI battery driver (Armin
Wolf)
- Limit error type to 32-bit width in the ACPI APEI error injection
code (Shuai Xue)
- Fix Lenovo Ideapad Z570 DMI match in the ACPI backlight driver
(Hans de Goede)
- Silence missing prototype warnings in some places in the
ACPI-related code (Ammar Faizi)
- Make kobj_type structures used in the ACPI code constant (Thomas
Weißschuh)
- Correct spelling in firmware-guide/ACPI (Randy Dunlap)
- Clarify the meaning of Explicit and Implicit in the _DSD GPIO
properties documentation (Andy Shevchenko)
- Fix some kernel-doc comments in the ACPI CPPC library code (Yang
Li)"
* tag 'acpi-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (25 commits)
ACPI: make kobj_type structures constant
Documentation: firmware-guide: gpio-properties: Clarify Explicit and Implicit
ACPICA: Fix typo in CDAT DSMAS struct definition
ACPI: resource: Do IRQ override on all TongFang GMxRGxx
ACPI: resource: Add IRQ overrides for MAINGEAR Vector Pro 2 models
ACPI: CPPC: Fix some kernel-doc comments
ACPI: video: Fix Lenovo Ideapad Z570 DMI match
Documentation: firmware-guide/ACPI: correct spelling
ACPI: PMIC: Add comments with DSDT power opregion field names
ACPI: battery: Increase maximum string length
ACPI: battery: Fix buffer overread if not NUL-terminated
ACPI: APEI: EINJ: Limit error type to 32-bit width
MAINTAINERS: Add x86 ACPI paths to the ACPI entry
ACPI: battery: Fix missing NUL-termination with large strings
ACPI: PNP: Introduce list of known non-PNP devices
ACPICA: nsrepair: handle cases without a return value correctly
ACPI: Silence missing prototype warnings
cpufreq: intel_pstate: Drop ACPI _PSS states table patching
ACPI: processor: perflib: Avoid updating frequency QoS unnecessarily
ACPI: processor: perflib: Use the "no limit" frequency QoS
...
- Add EPP support to the AMD P-state cpufreq driver (Perry Yuan, Wyes
Karny, Arnd Bergmann, Bagas Sanjaya).
- Drop the custom cpufreq driver for loongson1 that is not necessary
any more and the corresponding cpufreq platform device (Keguang
Zhang).
- Remove "select SRCU" from system sleep, cpufreq and OPP Kconfig
entries (Paul E. McKenney).
- Enable thermal cooling for Tegra194 (Yi-Wei Wang).
- Register module device table and add missing compatibles for
cpufreq-qcom-hw (Nícolas F. R. A. Prado, Abel Vesa and Luca Weiss).
- Various dt binding updates for qcom-cpufreq-nvmem and opp-v2-kryo-cpu
(Christian Marangi).
- Make kobj_type structure in the cpufreq core constant (Thomas
Weißschuh).
- Make cpufreq_unregister_driver() return void (Uwe Kleine-König).
- Make the TEO cpuidle governor check CPU utilization in order to refine
idle state selection (Kajetan Puchalski).
- Make Kconfig select the haltpoll cpuidle governor when the haltpoll
cpuidle driver is selected and replace a default_idle() call in that
driver with arch_cpu_idle() to allow MWAIT to be used (Li RongQing).
- Add Emerald Rapids Xeon support to the intel_idle driver (Artem
Bityutskiy).
- Add ARCH_SUSPEND_POSSIBLE dependencies for ARMv4 cpuidle drivers to
avoid randconfig build failures (Arnd Bergmann).
- Make kobj_type structures used in the cpuidle sysfs interface
constant (Thomas Weißschuh).
- Make the cpuidle driver registration code update microsecond values
of idle state parameters in accordance with their nanosecond values
if they are provided (Rafael Wysocki).
- Make the PSCI cpuidle driver prevent topology CPUs from being
suspended on PREEMPT_RT (Krzysztof Kozlowski).
- Document that pm_runtime_force_suspend() cannot be used with
DPM_FLAG_SMART_SUSPEND (Richard Fitzgerald).
- Add EXPORT macros for exporting PM functions from drivers (Richard
Fitzgerald).
- Remove /** from non-kernel-doc comments in hibernation code (Randy
Dunlap).
- Fix possible name leak in powercap_register_zone() (Yang Yingliang).
- Add Meteor Lake and Emerald Rapids support to the intel_rapl power
capping driver (Zhang Rui).
- Modify the idle_inject power capping facility to support 100% idle
injection (Srinivas Pandruvada).
- Fix large time windows handling in the intel_rapl power capping
driver (Zhang Rui).
- Fix memory leaks with using debugfs_lookup() in the generic PM
domains and Energy Model code (Greg Kroah-Hartman).
- Add missing 'cache-unified' property in the example for kryo OPP
bindings (Rob Herring).
- Fix error checking in opp_migrate_dentry() (Qi Zheng).
- Let qcom,opp-fuse-level be a 2-long array for qcom SoCs (Konrad
Dybcio).
- Modify some power management utilities to use the canonical ftrace
path (Ross Zwisler).
- Correct spelling problems for Documentation/power/ as reported by
codespell (Randy Dunlap).
-----BEGIN PGP SIGNATURE-----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=lZLx
-----END PGP SIGNATURE-----
Merge tag 'pm-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management updates from Rafael Wysocki:
"These add EPP support to the AMD P-state cpufreq driver, add support
for new platforms to the Intel RAPL power capping driver, intel_idle
and the Qualcomm cpufreq driver, enable thermal cooling for Tegra194,
drop the custom cpufreq driver for loongson1 that is not necessary any
more (and the corresponding cpufreq platform device), fix assorted
issues and clean up code.
Specifics:
- Add EPP support to the AMD P-state cpufreq driver (Perry Yuan, Wyes
Karny, Arnd Bergmann, Bagas Sanjaya)
- Drop the custom cpufreq driver for loongson1 that is not necessary
any more and the corresponding cpufreq platform device (Keguang
Zhang)
- Remove "select SRCU" from system sleep, cpufreq and OPP Kconfig
entries (Paul E. McKenney)
- Enable thermal cooling for Tegra194 (Yi-Wei Wang)
- Register module device table and add missing compatibles for
cpufreq-qcom-hw (Nícolas F. R. A. Prado, Abel Vesa and Luca Weiss)
- Various dt binding updates for qcom-cpufreq-nvmem and
opp-v2-kryo-cpu (Christian Marangi)
- Make kobj_type structure in the cpufreq core constant (Thomas
Weißschuh)
- Make cpufreq_unregister_driver() return void (Uwe Kleine-König)
- Make the TEO cpuidle governor check CPU utilization in order to
refine idle state selection (Kajetan Puchalski)
- Make Kconfig select the haltpoll cpuidle governor when the haltpoll
cpuidle driver is selected and replace a default_idle() call in
that driver with arch_cpu_idle() to allow MWAIT to be used (Li
RongQing)
- Add Emerald Rapids Xeon support to the intel_idle driver (Artem
Bityutskiy)
- Add ARCH_SUSPEND_POSSIBLE dependencies for ARMv4 cpuidle drivers to
avoid randconfig build failures (Arnd Bergmann)
- Make kobj_type structures used in the cpuidle sysfs interface
constant (Thomas Weißschuh)
- Make the cpuidle driver registration code update microsecond values
of idle state parameters in accordance with their nanosecond values
if they are provided (Rafael Wysocki)
- Make the PSCI cpuidle driver prevent topology CPUs from being
suspended on PREEMPT_RT (Krzysztof Kozlowski)
- Document that pm_runtime_force_suspend() cannot be used with
DPM_FLAG_SMART_SUSPEND (Richard Fitzgerald)
- Add EXPORT macros for exporting PM functions from drivers (Richard
Fitzgerald)
- Remove /** from non-kernel-doc comments in hibernation code (Randy
Dunlap)
- Fix possible name leak in powercap_register_zone() (Yang Yingliang)
- Add Meteor Lake and Emerald Rapids support to the intel_rapl power
capping driver (Zhang Rui)
- Modify the idle_inject power capping facility to support 100% idle
injection (Srinivas Pandruvada)
- Fix large time windows handling in the intel_rapl power capping
driver (Zhang Rui)
- Fix memory leaks with using debugfs_lookup() in the generic PM
domains and Energy Model code (Greg Kroah-Hartman)
- Add missing 'cache-unified' property in the example for kryo OPP
bindings (Rob Herring)
- Fix error checking in opp_migrate_dentry() (Qi Zheng)
- Let qcom,opp-fuse-level be a 2-long array for qcom SoCs (Konrad
Dybcio)
- Modify some power management utilities to use the canonical ftrace
path (Ross Zwisler)
- Correct spelling problems for Documentation/power/ as reported by
codespell (Randy Dunlap)"
* tag 'pm-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (53 commits)
Documentation: amd-pstate: disambiguate user space sections
cpufreq: amd-pstate: Fix invalid write to MSR_AMD_CPPC_REQ
dt-bindings: opp: opp-v2-kryo-cpu: enlarge opp-supported-hw maximum
dt-bindings: cpufreq: qcom-cpufreq-nvmem: make cpr bindings optional
dt-bindings: cpufreq: qcom-cpufreq-nvmem: specify supported opp tables
PM: Add EXPORT macros for exporting PM functions
cpuidle: psci: Do not suspend topology CPUs on PREEMPT_RT
MIPS: loongson32: Drop obsolete cpufreq platform device
powercap: intel_rapl: Fix handling for large time window
cpuidle: driver: Update microsecond values of state parameters as needed
cpuidle: sysfs: make kobj_type structures constant
cpuidle: add ARCH_SUSPEND_POSSIBLE dependencies
PM: EM: fix memory leak with using debugfs_lookup()
PM: domains: fix memory leak with using debugfs_lookup()
cpufreq: Make kobj_type structure constant
cpufreq: davinci: Fix clk use after free
cpufreq: amd-pstate: avoid uninitialized variable use
cpufreq: Make cpufreq_unregister_driver() return void
OPP: fix error checking in opp_migrate_dentry()
dt-bindings: cpufreq: cpufreq-qcom-hw: Add SM8550 compatible
...
This pull request contains the following branches:
doc.2023.01.05a: Documentation updates.
fixes.2023.01.23a: Miscellaneous fixes, perhaps most notably:
o Throttling callback invocation based on the number of callbacks
that are now ready to invoke instead of on the total number
of callbacks.
o Several patches that suppress false-positive boot-time
diagnostics, for example, due to lockdep not yet being
initialized.
o Make expedited RCU CPU stall warnings dump stacks of any tasks
that are blocking the stalled grace period. (Normal RCU CPU
stall warnings have doen this for mnay years.)
o Lazy-callback fixes to avoid delays during boot, suspend, and
resume. (Note that lazy callbacks must be explicitly enabled,
so this should not (yet) affect production use cases.)
kvfree.2023.01.03a: Cause kfree_rcu() and friends to take advantage of
polled grace periods, thus reducing memory footprint by almost
two orders of magnitude, admittedly on a microbenchmark.
This series also begins the transition from kfree_rcu(p) to
kfree_rcu_mightsleep(p). This transition was motivated by bugs
where kfree_rcu(p), which can block, was typed instead of the
intended kfree_rcu(p, rh).
srcu.2023.01.03a: SRCU updates, perhaps most notably fixing a bug that
causes SRCU to fail when booted on a system with a non-zero boot
CPU. This surprising situation actually happens for kdump kernels
on the powerpc architecture. It also adds an srcu_down_read()
and srcu_up_read(), which act like srcu_read_lock() and
srcu_read_unlock(), but allow an SRCU read-side critical section
to be handed off from one task to another.
srcu-always.2023.02.02a: Cleans up the now-useless SRCU Kconfig option.
There are a few more commits that are not yet acked or pulled
into maintainer trees, and these will be in a pull request for
a later merge window.
tasks.2023.01.03a: RCU-tasks updates, perhaps most notably these fixes:
o A strange interaction between PID-namespace unshare and the
RCU-tasks grace period that results in a low-probability but
very real hang.
o A race between an RCU tasks rude grace period on a single-CPU
system and CPU-hotplug addition of the second CPU that can result
in a too-short grace period.
o A race between shrinking RCU tasks down to a single callback list
and queuing a new callback to some other CPU, but where that
queuing is delayed for more than an RCU grace period. This can
result in that callback being stranded on the non-boot CPU.
torture.2023.01.05a: Torture-test updates and fixes.
torturescript.2023.01.03a: Torture-test scripting updates and fixes.
stall.2023.01.09a: Provide additional RCU CPU stall-warning information
in kernels built with CONFIG_RCU_CPU_STALL_CPUTIME=y, and
restore the full five-minute timeout limit for expedited RCU
CPU stall warnings.
-----BEGIN PGP SIGNATURE-----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=bBYK
-----END PGP SIGNATURE-----
Merge tag 'rcu.2023.02.10a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu
Pull RCU updates from Paul McKenney:
- Documentation updates
- Miscellaneous fixes, perhaps most notably:
- Throttling callback invocation based on the number of callbacks
that are now ready to invoke instead of on the total number of
callbacks
- Several patches that suppress false-positive boot-time
diagnostics, for example, due to lockdep not yet being
initialized
- Make expedited RCU CPU stall warnings dump stacks of any tasks
that are blocking the stalled grace period. (Normal RCU CPU
stall warnings have done this for many years)
- Lazy-callback fixes to avoid delays during boot, suspend, and
resume. (Note that lazy callbacks must be explicitly enabled, so
this should not (yet) affect production use cases)
- Make kfree_rcu() and friends take advantage of polled grace periods,
thus reducing memory footprint by almost two orders of magnitude,
admittedly on a microbenchmark
This also begins the transition from kfree_rcu(p) to
kfree_rcu_mightsleep(p). This transition was motivated by bugs where
kfree_rcu(p), which can block, was typed instead of the intended
kfree_rcu(p, rh)
- SRCU updates, perhaps most notably fixing a bug that causes SRCU to
fail when booted on a system with a non-zero boot CPU. This
surprising situation actually happens for kdump kernels on the
powerpc architecture
This also adds an srcu_down_read() and srcu_up_read(), which act like
srcu_read_lock() and srcu_read_unlock(), but allow an SRCU read-side
critical section to be handed off from one task to another
- Clean up the now-useless SRCU Kconfig option
There are a few more commits that are not yet acked or pulled into
maintainer trees, and these will be in a pull request for a later
merge window
- RCU-tasks updates, perhaps most notably these fixes:
- A strange interaction between PID-namespace unshare and the
RCU-tasks grace period that results in a low-probability but
very real hang
- A race between an RCU tasks rude grace period on a single-CPU
system and CPU-hotplug addition of the second CPU that can
result in a too-short grace period
- A race between shrinking RCU tasks down to a single callback
list and queuing a new callback to some other CPU, but where
that queuing is delayed for more than an RCU grace period. This
can result in that callback being stranded on the non-boot CPU
- Torture-test updates and fixes
- Torture-test scripting updates and fixes
- Provide additional RCU CPU stall-warning information in kernels built
with CONFIG_RCU_CPU_STALL_CPUTIME=y, and restore the full five-minute
timeout limit for expedited RCU CPU stall warnings
* tag 'rcu.2023.02.10a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu: (80 commits)
rcu/kvfree: Add kvfree_rcu_mightsleep() and kfree_rcu_mightsleep()
kernel/notifier: Remove CONFIG_SRCU
init: Remove "select SRCU"
fs/quota: Remove "select SRCU"
fs/notify: Remove "select SRCU"
fs/btrfs: Remove "select SRCU"
fs: Remove CONFIG_SRCU
drivers/pci/controller: Remove "select SRCU"
drivers/net: Remove "select SRCU"
drivers/md: Remove "select SRCU"
drivers/hwtracing/stm: Remove "select SRCU"
drivers/dax: Remove "select SRCU"
drivers/base: Remove CONFIG_SRCU
rcu: Disable laziness if lazy-tracking says so
rcu: Track laziness during boot and suspend
rcu: Remove redundant call to rcu_boost_kthread_setaffinity()
rcu: Allow up to five minutes expedited RCU CPU stall-warning timeouts
rcu: Align the output of RCU CPU stall warning messages
rcu: Add RCU stall diagnosis information
sched: Add helper nr_context_switches_cpu()
...
All the commits are trivial. Doc updates and a trivial code cleanup.
-----BEGIN PGP SIGNATURE-----
iIQEABYIACwWIQTfIjM1kS57o3GsC/uxYfJx3gVYGQUCY/Kvjw4cdGpAa2VybmVs
Lm9yZwAKCRCxYfJx3gVYGfcZAQDoyqEm807R2iaELEfee0xq/NPwJIaDRnXDP6ZL
rIEtqAD8CzpvvtKauekMIsCHVq7SuxDae8Hi0a/RImN8e1sy6wY=
=pUSo
-----END PGP SIGNATURE-----
Merge tag 'cgroup-for-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup
Pull cgroup updates from Tejun Heo:
"All the changes are trivial: documentation updates and a trivial code
cleanup"
* tag 'cgroup-for-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
cgroup/cpuset: fix a few kernel-doc warnings & coding style
docs: cgroup-v1: use numbered lists for user interface setup
docs: cgroup-v1: add internal cross-references
docs: cgroup-v1: make swap extension subsections subsections
docs: cgroup-v1: use bullet lists for list of stat file tables
docs: cgroup-v1: move hierarchy of accounting caption
docs: cgroup-v1: fix footnotes
docs: cgroup-v1: use code block for locking order schema
docs: cgroup-v1: wrap remaining admonitions in admonition blocks
docs: cgroup-v1: replace custom note constructs with appropriate admonition blocks
cgroup/cpuset: no need to explicitly init a global static variable
Core:
- Move the interrupt affinity spreading mechanism into lib/group_cpus
so it can be used for similar spreading requirements, e.g. in the
block multi-queue code.
This also contains a first usecase in the block multi-queue code which
Jens asked to take along with the librarization.
- Improve irqdomain locking to close a number race conditions which
can be observed with massive parallel device driver probing.
- Enforce and document the semantics of disable_irq() which cannot be
invoked safely from non-sleepable context.
- Move the IPI multiplexing code from the Apple AIC driver into the
core. so it can be reused by RISCV.
Drivers:
- Plug OF node refcounting leaks in various drivers.
- Correctly mark level triggered interrupts in the Broadcom L2 drivers.
- The usual small fixes and improvements.
- No new drivers for the record!
-----BEGIN PGP SIGNATURE-----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=+pu3
-----END PGP SIGNATURE-----
Merge tag 'irq-core-2023-02-20' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq updates from Thomas Gleixner:
"Updates for the interrupt subsystem:
Core:
- Move the interrupt affinity spreading mechanism into lib/group_cpus
so it can be used for similar spreading requirements, e.g. in the
block multi-queue code
This also contains a first usecase in the block multi-queue code
which Jens asked to take along with the librarization
- Improve irqdomain locking to close a number race conditions which
can be observed with massive parallel device driver probing
- Enforce and document the semantics of disable_irq() which cannot be
invoked safely from non-sleepable context
- Move the IPI multiplexing code from the Apple AIC driver into the
core, so it can be reused by RISCV
Drivers:
- Plug OF node refcounting leaks in various drivers
- Correctly mark level triggered interrupts in the Broadcom L2
drivers
- The usual small fixes and improvements
- No new drivers for the record!"
* tag 'irq-core-2023-02-20' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (42 commits)
irqchip/irq-bcm7120-l2: Set IRQ_LEVEL for level triggered interrupts
irqchip/irq-brcmstb-l2: Set IRQ_LEVEL for level triggered interrupts
irqdomain: Switch to per-domain locking
irqchip/mvebu-odmi: Use irq_domain_create_hierarchy()
irqchip/loongson-pch-msi: Use irq_domain_create_hierarchy()
irqchip/gic-v3-mbi: Use irq_domain_create_hierarchy()
irqchip/gic-v3-its: Use irq_domain_create_hierarchy()
irqchip/gic-v2m: Use irq_domain_create_hierarchy()
irqchip/alpine-msi: Use irq_domain_add_hierarchy()
x86/uv: Use irq_domain_create_hierarchy()
x86/ioapic: Use irq_domain_create_hierarchy()
irqdomain: Clean up irq_domain_push/pop_irq()
irqdomain: Drop leftover brackets
irqdomain: Drop dead domain-name assignment
irqdomain: Drop revmap mutex
irqdomain: Fix domain registration race
irqdomain: Fix mapping-creation race
irqdomain: Refactor __irq_domain_alloc_irqs()
irqdomain: Look for existing mapping only once
irqdomain: Drop bogus fwspec-mapping error handling
...
Core:
- Yet another round of improvements to make the clocksource watchdog
more robust:
- Relax the clocksource-watchdog skew criteria to match the NTP
criteria.
- Temporarily skip the watchdog when high memory latencies are
detected which can lead to false-positives.
- Provide an option to enable TSC skew detection even on systems
where TSC is marked as reliable.
Sigh!
- Initialize the restart block in the nanosleep syscalls to be directed
to the no restart function instead of doing a partial setup on entry.
This prevents an erroneous restart_syscall() invocation from
corrupting user space data. While such a situation is clearly a user
space bug, preventing this is a correctness issue and caters to the
least suprise principle.
- Ignore the hrtimer slack for realtime tasks in schedule_hrtimeout()
to align it with the nanosleep semantics.
Drivers:
- The obligatory new driver bindings for Mediatek, Rockchip and RISC-V
variants.
- Add support for the C3STOP misfeature to the RISC-V timer to handle
the case where the timer stops in deeper idle state.
- Set up a static key in the RISC-V timer correctly before first use.
- The usual small improvements and fixes all over the place
-----BEGIN PGP SIGNATURE-----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=I67j
-----END PGP SIGNATURE-----
Merge tag 'timers-core-2023-02-20' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer updates from Thomas Gleixner:
"Updates for timekeeping, timers and clockevent/source drivers:
Core:
- Yet another round of improvements to make the clocksource watchdog
more robust:
- Relax the clocksource-watchdog skew criteria to match the NTP
criteria.
- Temporarily skip the watchdog when high memory latencies are
detected which can lead to false-positives.
- Provide an option to enable TSC skew detection even on systems
where TSC is marked as reliable.
Sigh!
- Initialize the restart block in the nanosleep syscalls to be
directed to the no restart function instead of doing a partial
setup on entry.
This prevents an erroneous restart_syscall() invocation from
corrupting user space data. While such a situation is clearly a
user space bug, preventing this is a correctness issue and caters
to the least suprise principle.
- Ignore the hrtimer slack for realtime tasks in schedule_hrtimeout()
to align it with the nanosleep semantics.
Drivers:
- The obligatory new driver bindings for Mediatek, Rockchip and
RISC-V variants.
- Add support for the C3STOP misfeature to the RISC-V timer to handle
the case where the timer stops in deeper idle state.
- Set up a static key in the RISC-V timer correctly before first use.
- The usual small improvements and fixes all over the place"
* tag 'timers-core-2023-02-20' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (30 commits)
clocksource/drivers/timer-sun4i: Add CLOCK_EVT_FEAT_DYNIRQ
clocksource/drivers/em_sti: Mark driver as non-removable
clocksource/drivers/sh_tmu: Mark driver as non-removable
clocksource/drivers/riscv: Patch riscv_clock_next_event() jump before first use
clocksource/drivers/timer-microchip-pit64b: Add delay timer
clocksource/drivers/timer-microchip-pit64b: Select driver only on ARM
dt-bindings: timer: sifive,clint: add comaptibles for T-Head's C9xx
dt-bindings: timer: mediatek,mtk-timer: add MT8365
clocksource/drivers/riscv: Get rid of clocksource_arch_init() callback
clocksource/drivers/sh_cmt: Mark driver as non-removable
clocksource/drivers/timer-microchip-pit64b: Drop obsolete dependency on COMPILE_TEST
clocksource/drivers/riscv: Increase the clock source rating
clocksource/drivers/timer-riscv: Set CLOCK_EVT_FEAT_C3STOP based on DT
dt-bindings: timer: Add bindings for the RISC-V timer device
RISC-V: time: initialize hrtimer based broadcast clock event device
dt-bindings: timer: rk-timer: Add rktimer for rv1126
time/debug: Fix memory leak with using debugfs_lookup()
clocksource: Enable TSC watchdog checking of HPET and PMTMR only when requested
posix-timers: Use atomic64_try_cmpxchg() in __update_gt_cputime()
clocksource: Verify HPET and PMTMR when TSC unverified
...
allocation. Its goal is to control resource allocation in external slow
memory which is connected to the machine like for example through CXL devices,
accelerators etc
-----BEGIN PGP SIGNATURE-----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=8hmj
-----END PGP SIGNATURE-----
Merge tag 'x86_cache_for_v6.3_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 resource control updates from Borislav Petkov:
- Add support for a new AMD feature called slow memory bandwidth
allocation. Its goal is to control resource allocation in external
slow memory which is connected to the machine like for example
through CXL devices, accelerators etc
* tag 'x86_cache_for_v6.3_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/resctrl: Fix a silly -Wunused-but-set-variable warning
Documentation/x86: Update resctrl.rst for new features
x86/resctrl: Add interface to write mbm_local_bytes_config
x86/resctrl: Add interface to write mbm_total_bytes_config
x86/resctrl: Add interface to read mbm_local_bytes_config
x86/resctrl: Add interface to read mbm_total_bytes_config
x86/resctrl: Support monitor configuration
x86/resctrl: Add __init attribute to rdt_get_mon_l3_config()
x86/resctrl: Detect and configure Slow Memory Bandwidth Allocation
x86/resctrl: Include new features in command line options
x86/cpufeatures: Add Bandwidth Monitoring Event Configuration feature flag
x86/resctrl: Add a new resource type RDT_RESOURCE_SMBA
x86/cpufeatures: Add Slow Memory Bandwidth Allocation feature flag
x86/resctrl: Replace smp_call_function_many() with on_each_cpu_mask()
controller
- Add support for decoding errors from the first and second level memory
on SKL-based hardware
- Add support for the memory controllers in Intel Granite Rapids and
Emerald Rapids machines
- First round of amd64_edac driver simplification and removal of
unneeded functionality
- The usual cleanups and fixes
-----BEGIN PGP SIGNATURE-----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=i3bo
-----END PGP SIGNATURE-----
Merge tag 'edac_updates_for_v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras
Pull EDAC updates from Borislav Petkov:
- Add a driver for the RAS functionality on Xilinx's on chip memory
controller
- Add support for decoding errors from the first and second level
memory on SKL-based hardware
- Add support for the memory controllers in Intel Granite Rapids and
Emerald Rapids machines
- First round of amd64_edac driver simplification and removal of
unneeded functionality
- The usual cleanups and fixes
* tag 'edac_updates_for_v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras:
EDAC/amd64: Shut up an -Werror,-Wsometimes-uninitialized clang false positive
EDAC/amd64: Remove early_channel_count()
EDAC/amd64: Remove PCI Function 0
EDAC/amd64: Remove PCI Function 6
EDAC/amd64: Remove scrub rate control for Family 17h and later
EDAC/amd64: Don't set up EDAC PCI control on Family 17h+
EDAC/i10nm: Add driver decoder for Sapphire Rapids server
EDAC/i10nm: Add Intel Granite Rapids server support
EDAC/i10nm: Make more configurations CPU model specific
EDAC/i10nm: Add Intel Emerald Rapids server support
EDAC/skx_common: Delete duplicated and unreachable code
EDAC/skx_common: Enable EDAC support for the "near" memory
EDAC/qcom: Add platform_device_id table for module autoloading
EDAC/zynqmp: Add EDAC support for Xilinx ZynqMP OCM
dt-bindings: edac: Add bindings for Xilinx ZynqMP OCM
- Improve the scalability of the CFS bandwidth unthrottling logic
with large number of CPUs.
- Fix & rework various cpuidle routines, simplify interaction with
the generic scheduler code. Add __cpuidle methods as noinstr to
objtool's noinstr detection and fix boatloads of cpuidle bugs & quirks.
- Add new ABI: introduce MEMBARRIER_CMD_GET_REGISTRATIONS,
to query previously issued registrations.
- Limit scheduler slice duration to the sysctl_sched_latency period,
to improve scheduling granularity with a large number of SCHED_IDLE
tasks.
- Debuggability enhancement on sys_exit(): warn about disabled IRQs,
but also enable them to prevent a cascade of followup problems and
repeat warnings.
- Fix the rescheduling logic in prio_changed_dl().
- Micro-optimize cpufreq and sched-util methods.
- Micro-optimize ttwu_runnable()
- Micro-optimize the idle-scanning in update_numa_stats(),
select_idle_capacity() and steal_cookie_task().
- Update the RSEQ code & self-tests
- Constify various scheduler methods
- Remove unused methods
- Refine __init tags
- Documentation updates
- ... Misc other cleanups, fixes
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=l1nN
-----END PGP SIGNATURE-----
Merge tag 'sched-core-2023-02-20' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler updates from Ingo Molnar:
- Improve the scalability of the CFS bandwidth unthrottling logic with
large number of CPUs.
- Fix & rework various cpuidle routines, simplify interaction with the
generic scheduler code. Add __cpuidle methods as noinstr to objtool's
noinstr detection and fix boatloads of cpuidle bugs & quirks.
- Add new ABI: introduce MEMBARRIER_CMD_GET_REGISTRATIONS, to query
previously issued registrations.
- Limit scheduler slice duration to the sysctl_sched_latency period, to
improve scheduling granularity with a large number of SCHED_IDLE
tasks.
- Debuggability enhancement on sys_exit(): warn about disabled IRQs,
but also enable them to prevent a cascade of followup problems and
repeat warnings.
- Fix the rescheduling logic in prio_changed_dl().
- Micro-optimize cpufreq and sched-util methods.
- Micro-optimize ttwu_runnable()
- Micro-optimize the idle-scanning in update_numa_stats(),
select_idle_capacity() and steal_cookie_task().
- Update the RSEQ code & self-tests
- Constify various scheduler methods
- Remove unused methods
- Refine __init tags
- Documentation updates
- Misc other cleanups, fixes
* tag 'sched-core-2023-02-20' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (110 commits)
sched/rt: pick_next_rt_entity(): check list_entry
sched/deadline: Add more reschedule cases to prio_changed_dl()
sched/fair: sanitize vruntime of entity being placed
sched/fair: Remove capacity inversion detection
sched/fair: unlink misfit task from cpu overutilized
objtool: mem*() are not uaccess safe
cpuidle: Fix poll_idle() noinstr annotation
sched/clock: Make local_clock() noinstr
sched/clock/x86: Mark sched_clock() noinstr
x86/pvclock: Improve atomic update of last_value in pvclock_clocksource_read()
x86/atomics: Always inline arch_atomic64*()
cpuidle: tracing, preempt: Squash _rcuidle tracing
cpuidle: tracing: Warn about !rcu_is_watching()
cpuidle: lib/bug: Disable rcu_is_watching() during WARN/BUG
cpuidle: drivers: firmware: psci: Dont instrument suspend code
KVM: selftests: Fix build of rseq test
exit: Detect and fix irq disabled state in oops
cpuidle, arm64: Fix the ARM64 cpuidle logic
cpuidle: mvebu: Fix duplicate flags assignment
sched/fair: Limit sched slice duration
...
About a quarter of the changes are for 32-bit arm, mostly filling in
device support for existing machines and adding minor cleanups, mostly
for Qualcomm and Samsung based machines.
Two new 32-bit SoCs are added, both are quad-core Cortex-A7 chips from
Rockchips that have been around for a while but were lacking kernel
support so far: RV1126 is a Vision SoC with an NPU and is used in the
Edgeble Neural Compute Module 2(Neu2) board, while RK3128 is design for
TV boxes and so far only comes with a dts for its refernece design.
The other 32-bit boards that were added are two ASpeed AST2600 based BMC
boards, the Microchip sam9x60_curiosity development board (Armv5 based!),
the Enclustra PE1 FPGA-SoM baseboard, and a few more boards for i.MX53
and i.MX6ULL.
On the RISC-V side, there are fewer patches, but a total of ten new
single-board computers based on variations of the Allwinner D1/T113 chip,
plus one more board based on Microchip Polarfire.
As usual, arm64 has by far the most changes here, with over 700 non-merge
changesets, among them over 400 alone for Qualcomm. The newly added SoCs
this time are all recent high-end embedded SoCs for various markets,
each on comes with support for its reference board:
- Qualcomm SM8550 (Snapdragon 8 Gen 2) for mobile phones
- Qualcomm QDU1000/QRU1000 5G RAN platform
- Rockchips RK3588/RK3588s for tablets, chromebooks and SBCs
- TI J784S4 for industrial and automotive applications
In total, there are 46 new arm64 machines:
- Reference platforms for each of the five new SoCs
- Three Amlogic based development boards
- Six embedded machines based on NXP i.MX8MM and i.MX8MP
- The Mediatek mt7986a based Banana Pi R3 router
- Six tablets based on Qualcomm MSM8916 (Snapdragon 410),
SM6115 (Snapdragon 662) and SM8250 (Snapdragon 865)
- Two LTE dongles, also based on MSM8916
- Seven mobile phones, based on Qualcomm MSM8953 (Snapdragon 610),
SDM450 and SDM632
- Three chromebooks based on Qualcomm SC7280 (Snapdragon 7c)
- Nine development boards based on Rockchips RK3588, RK3568,
RK3566 and RK3328.
- Five development machines based on TI K3 (AM642/AM654/AM68/AM69)
The cleanup of dtc warnings continues across all platforms, adding
to the total number of changes.
-----BEGIN PGP SIGNATURE-----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=I8Ga
-----END PGP SIGNATURE-----
Merge tag 'soc-dt-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC DT updates from Arnd Bergmann:
"About a quarter of the changes are for 32-bit arm, mostly filling in
device support for existing machines and adding minor cleanups, mostly
for Qualcomm and Samsung based machines.
Two new 32-bit SoCs are added, both are quad-core Cortex-A7 chips from
Rockchips that have been around for a while but were lacking kernel
support so far: RV1126 is a Vision SoC with an NPU and is used in the
Edgeble Neural Compute Module 2(Neu2) board, while RK3128 is design
for TV boxes and so far only comes with a dts for its refernece
design.
The other 32-bit boards that were added are two ASpeed AST2600 based
BMC boards, the Microchip sam9x60_curiosity development board (Armv5
based!), the Enclustra PE1 FPGA-SoM baseboard, and a few more boards
for i.MX53 and i.MX6ULL.
On the RISC-V side, there are fewer patches, but a total of ten new
single-board computers based on variations of the Allwinner D1/T113
chip, plus one more board based on Microchip Polarfire.
As usual, arm64 has by far the most changes here, with over 700
non-merge changesets, among them over 400 alone for Qualcomm. The
newly added SoCs this time are all recent high-end embedded SoCs for
various markets, each on comes with support for its reference board:
- Qualcomm SM8550 (Snapdragon 8 Gen 2) for mobile phones
- Qualcomm QDU1000/QRU1000 5G RAN platform
- Rockchips RK3588/RK3588s for tablets, chromebooks and SBCs
- TI J784S4 for industrial and automotive applications
In total, there are 46 new arm64 machines:
- Reference platforms for each of the five new SoCs
- Three Amlogic based development boards
- Six embedded machines based on NXP i.MX8MM and i.MX8MP
- The Mediatek mt7986a based Banana Pi R3 router
- Six tablets based on Qualcomm MSM8916 (Snapdragon 410), SM6115
(Snapdragon 662) and SM8250 (Snapdragon 865)
- Two LTE dongles, also based on MSM8916
- Seven mobile phones, based on Qualcomm MSM8953 (Snapdragon 610),
SDM450 and SDM632
- Three chromebooks based on Qualcomm SC7280 (Snapdragon 7c)
- Nine development boards based on Rockchips RK3588, RK3568, RK3566
and RK3328.
- Five development machines based on TI K3 (AM642/AM654/AM68/AM69)
The cleanup of dtc warnings continues across all platforms, adding to
the total number of changes"
* tag 'soc-dt-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (1035 commits)
dt-bindings: riscv: correct starfive visionfive 2 compatibles
ARM: dts: socfpga: Add enclustra PE1 devicetree
dt-bindings: altera: Add enclustra mercury PE1
arm64: dts: qcom: msm8996: align RPM G-Link clock-controller node with bindings
arm64: dts: qcom: qcs404: align RPM G-Link node with bindings
arm64: dts: qcom: ipq6018: align RPM G-Link node with bindings
arm64: dts: qcom: sm8550: remove invalid interconnect property from cryptobam
arm64: dts: qcom: sc7280: Adjust zombie PWM frequency
arm64: dts: qcom: sc8280xp-pmics: Specify interrupt parent explicitly
arm64: dts: qcom: sm7225-fairphone-fp4: enable remaining i2c busses
arm64: dts: qcom: sm7225-fairphone-fp4: move status property down
arm64: dts: qcom: pmk8350: Use the correct PON compatible
arm64: dts: qcom: sc8280xp-x13s: Enable external display
arm64: dts: qcom: sc8280xp-crd: Introduce pmic_glink
arm64: dts: qcom: sc8280xp: Add USB-C-related DP blocks
arm64: dts: qcom: sm8350-hdk: enable GPU
arm64: dts: qcom: sm8350: add GPU, GMU, GPU CC and SMMU nodes
arm64: dts: qcom: sm8350: finish reordering nodes
arm64: dts: qcom: sm8350: move more nodes to correct place
arm64: dts: qcom: sm8350: reorder device nodes
...
The majority of the changes are for the OMAP2 platform, mostly
removing some dead code that got left behind from previous cleanups.
Aside from that, there are very minor updates and correctness fixes for
Zynq, i.MX, Samsung, Broadcom, AT91, ep93xx, and OMAP1.
-----BEGIN PGP SIGNATURE-----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=4Xcx
-----END PGP SIGNATURE-----
Merge tag 'arm-soc-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC updates from Arnd Bergmann:
"The majority of the changes are for the OMAP2 platform, mostly
removing some dead code that got left behind from previous cleanups.
Aside from that, there are very minor updates and correctness fixes
for Zynq, i.MX, Samsung, Broadcom, AT91, ep93xx, and OMAP1"
* tag 'arm-soc-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (26 commits)
dt-bindings: soc: samsung: exynos-pmu: allow phys as child
ARM: imx: mach-imx6ul: add imx6ulz support
ARM: imx: Call ida_simple_remove() for ida_simple_get
arm64: drop redundant "ARMv8" from Kconfig option title
ARM: ep93xx: Convert to use descriptors for GPIO LEDs
ARM: s3c: fix s3c64xx_set_timer_source prototype
ARM: OMAP2+: Fix spelling typos in comment
ARM: OMAP2+: Remove unneeded #include <linux/pinctrl/machine.h>
ARM: OMAP2+: Remove unneeded #include <linux/pinctrl/pinmux.h>
ARM: OMAP1: call platform_device_put() in error case in omap1_dm_timer_init()
ARM: BCM63xx: remove useless goto statement
ARM: omap2: make functions static
ARM: omap2: remove unused omap2_pm_init
ARM: omap2: remove unused declarations
ARM: omap2: remove unused functions
ARM: omap2: smartreflex: remove on_init control
ARM: omap2: remove APLL control
ARM: omap2: simplify clock2xxx header
ARM: omap2: remove unused omap_hwmod_reset.c
ARM: omap2: remove unused headers
...
This is a follow-up to the deprecation of most of the old-style board
files that was merged in linux-6.0, removing them for good.
This branch is almost exclusively dead code removal based on those
annotations. Some device driver removals went through separate subsystem
trees, but the majority is in the same branch, in order to better handle
dependencies between the patches and avoid breaking bisection.
Unfortunately that leads to merge conflicts against other changes in the
subsystem trees, but they should all be trivial to resolve by removing
the files.
See commit 7d0d3fa7339e ("Merge tag 'arm-boardfiles-6.0' of
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc") for the
description of which machines were marked unused and are now removed. The
only removals that got postponed are Terastation WXL (mv78xx0) and
Jornada720 (StrongARM1100), which turned out to still have potential
users.
-----BEGIN PGP SIGNATURE-----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=WejQ
-----END PGP SIGNATURE-----
Merge tag 'arm-boardfile-remove-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC boardfile updates from Arnd Bergmann
"Unused boardfile removal for 6.3
This is a follow-up to the deprecation of most of the old-style board
files that was merged in linux-6.0, removing them for good.
This branch is almost exclusively dead code removal based on those
annotations. Some device driver removals went through separate
subsystem trees, but the majority is in the same branch, in order to
better handle dependencies between the patches and avoid breaking
bisection.
Unfortunately that leads to merge conflicts against other changes in
the subsystem trees, but they should all be trivial to resolve by
removing the files.
See commit 7d0d3fa7339e ("Merge tag 'arm-boardfiles-6.0' of
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc") for the
description of which machines were marked unused and are now removed.
The only removals that got postponed are Terastation WXL (mv78xx0) and
Jornada720 (StrongARM1100), which turned out to still have potential
users"
* tag 'arm-boardfile-remove-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (91 commits)
mmc: omap: drop TPS65010 dependency
ARM: pxa: restore mfp-pxa320.h
usb: ohci-omap: avoid unused-variable warning
ARM: debug: remove references in DEBUG_UART_8250_SHIFT to removed configs
ARM: s3c: remove obsolete s3c-cpu-freq header
MAINTAINERS: adjust SAMSUNG SOC CLOCK DRIVERS after s3c24xx support removal
MAINTAINERS: update file entries after arm multi-platform rework and mach-pxa removal
ARM: remove CONFIG_UNUSED_BOARD_FILES
mfd: remove htc-pasic3 driver
w1: remove ds1wm driver
usb: remove ohci-tmio driver
fbdev: remove w100fb driver
fbdev: remove tmiofb driver
mmc: remove tmio_mmc driver
mfd: remove ucb1400 support
mfd: remove toshiba tmio drivers
rtc: remove v3020 driver
power: remove pda_power supply driver
ASoC: pxa: remove unused board support
pcmcia: remove unused pxa/sa1100 drivers
...
-----BEGIN PGP SIGNATURE-----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=poRc
-----END PGP SIGNATURE-----
Merge tag 'for-6.3/block-2023-02-16' of git://git.kernel.dk/linux
Pull block updates from Jens Axboe:
- NVMe updates via Christoph:
- Small improvements to the logging functionality (Amit Engel)
- Authentication cleanups (Hannes Reinecke)
- Cleanup and optimize the DMA mapping cod in the PCIe driver
(Keith Busch)
- Work around the command effects for Format NVM (Keith Busch)
- Misc cleanups (Keith Busch, Christoph Hellwig)
- Fix and cleanup freeing single sgl (Keith Busch)
- MD updates via Song:
- Fix a rare crash during the takeover process
- Don't update recovery_cp when curr_resync is ACTIVE
- Free writes_pending in md_stop
- Change active_io to percpu
- Updates to drbd, inching us closer to unifying the out-of-tree driver
with the in-tree one (Andreas, Christoph, Lars, Robert)
- BFQ update adding support for multi-actuator drives (Paolo, Federico,
Davide)
- Make brd compliant with REQ_NOWAIT (me)
- Fix for IOPOLL and queue entering, fixing stalled IO waiting on
timeouts (me)
- Fix for REQ_NOWAIT with multiple bios (me)
- Fix memory leak in blktrace cleanup (Greg)
- Clean up sbitmap and fix a potential hang (Kemeng)
- Clean up some bits in BFQ, and fix a bug in the request injection
(Kemeng)
- Clean up the request allocation and issue code, and fix some bugs
related to that (Kemeng)
- ublk updates and fixes:
- Add support for unprivileged ublk (Ming)
- Improve device deletion handling (Ming)
- Misc (Liu, Ziyang)
- s390 dasd fixes (Alexander, Qiheng)
- Improve utility of request caching and fixes (Anuj, Xiao)
- zoned cleanups (Pankaj)
- More constification for kobjs (Thomas)
- blk-iocost cleanups (Yu)
- Remove bio splitting from drivers that don't need it (Christoph)
- Switch blk-cgroups to use struct gendisk. Some of this is now
incomplete as select late reverts were done. (Christoph)
- Add bvec initialization helpers, and convert callers to use that
rather than open-coding it (Christoph)
- Misc fixes and cleanups (Jinke, Keith, Arnd, Bart, Li, Martin,
Matthew, Ulf, Zhong)
* tag 'for-6.3/block-2023-02-16' of git://git.kernel.dk/linux: (169 commits)
brd: use radix_tree_maybe_preload instead of radix_tree_preload
block: use proper return value from bio_failfast()
block: bio-integrity: Copy flags when bio_integrity_payload is cloned
block: Fix io statistics for cgroup in throttle path
brd: mark as nowait compatible
brd: check for REQ_NOWAIT and set correct page allocation mask
brd: return 0/-error from brd_insert_page()
block: sync mixed merged request's failfast with 1st bio's
Revert "blk-cgroup: pin the gendisk in struct blkcg_gq"
Revert "blk-cgroup: pass a gendisk to blkg_lookup"
Revert "blk-cgroup: delay blk-cgroup initialization until add_disk"
Revert "blk-cgroup: delay calling blkcg_exit_disk until disk_release"
Revert "blk-cgroup: move the cgroup information to struct gendisk"
nvme-pci: remove iod use_sgls
nvme-pci: fix freeing single sgl
block: ublk: check IO buffer based on flag need_get_data
s390/dasd: Fix potential memleak in dasd_eckd_init()
s390/dasd: sort out physical vs virtual pointers usage
block: Remove the ALLOC_CACHE_SLACK constant
block: make kobj_type structures constant
...
Fix the longstanding implementation limitation that fsverity was only
supported when the Merkle tree block size, filesystem block size, and
PAGE_SIZE were all equal. Specifically, add support for Merkle tree
block sizes less than PAGE_SIZE, and make ext4 support fsverity on
filesystems where the filesystem block size is less than PAGE_SIZE.
Effectively, this means that fsverity can now be used on systems with
non-4K pages, at least on ext4. These changes have been tested using
the verity group of xfstests, newly updated to cover the new code paths.
Also update fs/verity/ to support verifying data from large folios.
There's also a similar patch for fs/crypto/, to support decrypting data
from large folios, which I'm including in this pull request to avoid a
merge conflict between the fscrypt and fsverity branches.
There will be a merge conflict in fs/buffer.c with some of the foliation
work in the mm tree. Please use the merge resolution from linux-next.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQSacvsUNc7UX4ntmEPzXCl4vpKOKwUCY/KJtRQcZWJpZ2dlcnNA
Z29vZ2xlLmNvbQAKCRDzXCl4vpKOK/A/AP0RUlCClBRuHwXPRG0we8R1L153ga4s
Vl+xRpCr+SswXwEAiOEpYN5cXoVKzNgxbEXo2pQzxi5lrpjZgUI6CL3DuQs=
=ZRFX
-----END PGP SIGNATURE-----
Merge tag 'fsverity-for-linus' of git://git.kernel.org/pub/scm/fs/fsverity/linux
Pull fsverity updates from Eric Biggers:
"Fix the longstanding implementation limitation that fsverity was only
supported when the Merkle tree block size, filesystem block size, and
PAGE_SIZE were all equal.
Specifically, add support for Merkle tree block sizes less than
PAGE_SIZE, and make ext4 support fsverity on filesystems where the
filesystem block size is less than PAGE_SIZE.
Effectively, this means that fsverity can now be used on systems with
non-4K pages, at least on ext4. These changes have been tested using
the verity group of xfstests, newly updated to cover the new code
paths.
Also update fs/verity/ to support verifying data from large folios.
There's also a similar patch for fs/crypto/, to support decrypting
data from large folios, which I'm including in here to avoid a merge
conflict between the fscrypt and fsverity branches"
* tag 'fsverity-for-linus' of git://git.kernel.org/pub/scm/fs/fsverity/linux:
fscrypt: support decrypting data from large folios
fsverity: support verifying data from large folios
fsverity.rst: update git repo URL for fsverity-utils
ext4: allow verity with fs block size < PAGE_SIZE
fs/buffer.c: support fsverity in block_read_full_folio()
f2fs: simplify f2fs_readpage_limit()
ext4: simplify ext4_readpage_limit()
fsverity: support enabling with tree block size < PAGE_SIZE
fsverity: support verification with tree block size < PAGE_SIZE
fsverity: replace fsverity_hash_page() with fsverity_hash_block()
fsverity: use EFBIG for file too large to enable verity
fsverity: store log2(digest_size) precomputed
fsverity: simplify Merkle tree readahead size calculation
fsverity: use unsigned long for level_start
fsverity: remove debug messages and CONFIG_FS_VERITY_DEBUG
fsverity: pass pos and size to ->write_merkle_tree_block
fsverity: optimize fsverity_cleanup_inode() on non-verity files
fsverity: optimize fsverity_prepare_setattr() on non-verity files
fsverity: optimize fsverity_file_open() on non-verity files
- Add per-cpu kthreads for low-latency decompression for Android
use cases;
- Get rid of tagged pointer helpers since they are rarely used now;
- Several code cleanups to reduce codebase;
- Documentation and MAINTAINERS updates.
-----BEGIN PGP SIGNATURE-----
iIcEABYIAC8WIQThPAmQN9sSA0DVxtI5NzHcH7XmBAUCY/IDjhEceGlhbmdAa2Vy
bmVsLm9yZwAKCRA5NzHcH7XmBNbTAQDT2njll/B2JSYbVC2I2HYTZSyFXEaHhH+M
6gHRbEhTWAD/VNiAcdE600IkUwut/78tDvwlz/XJSd2JQMMwkTSviwc=
=oroQ
-----END PGP SIGNATURE-----
Merge tag 'erofs-for-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs
Pull erofs updates from Gao Xiang:
"The most noticeable feature for this cycle is per-CPU kthread
decompression since Android use cases need low-latency I/O handling in
order to ensure the app runtime performance, currently unbounded
workqueue latencies are not quite good for production on many aarch64
hardwares and thus we need to introduce a deterministic expectation
for these. Decompression is CPU-intensive and it is sleepable for
EROFS, so other alternatives like decompression under softirq contexts
are not considered. More details are in the corresponding commit
message.
Others are random cleanups around the whole codebase and we will
continue to clean up further in the next few months.
Due to Lunar New Year holidays, some other new features were not
completely reviewed and solidified as expected and we may delay them
into the next version.
Summary:
- Add per-cpu kthreads for low-latency decompression for Android use
cases
- Get rid of tagged pointer helpers since they are rarely used now
- Several code cleanups to reduce codebase
- Documentation and MAINTAINERS updates"
* tag 'erofs-for-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs: (21 commits)
erofs: fix an error code in z_erofs_init_zip_subsystem()
erofs: unify anonymous inodes for blob
erofs: relinquish volume with mutex held
erofs: maintain cookies of share domain in self-contained list
erofs: remove unused device mapping in meta routine
MAINTAINERS: erofs: Add Documentation/ABI/testing/sysfs-fs-erofs
Documentation/ABI: sysfs-fs-erofs: update supported features
erofs: remove unused EROFS_GET_BLOCKS_RAW flag
erofs: update print symbols for various flags in trace
erofs: make kobj_type structures constant
erofs: add per-cpu threads for decompression as an option
erofs: tidy up internal.h
erofs: get rid of z_erofs_do_map_blocks() forward declaration
erofs: move zdata.h into zdata.c
erofs: remove tagged pointer helpers
erofs: avoid tagged pointers to mark sync decompression
erofs: get rid of erofs_inode_datablocks()
erofs: simplify iloc()
erofs: get rid of debug_one_dentry()
erofs: remove linux/buffer_head.h dependency
...
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCY+5NlQAKCRCRxhvAZXjc
orOaAP9i2h3OJy95nO2Fpde0Bt2UT+oulKCCcGlvXJ8/+TQpyQD/ZQq47gFQ0EAz
Br5NxeyGeecAb0lHpFz+CpLGsxMrMwQ=
=+BG5
-----END PGP SIGNATURE-----
Merge tag 'fs.idmapped.v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/idmapping
Pull vfs idmapping updates from Christian Brauner:
- Last cycle we introduced the dedicated struct mnt_idmap type for
mount idmapping and the required infrastucture in 256c8aed2b42 ("fs:
introduce dedicated idmap type for mounts"). As promised in last
cycle's pull request message this converts everything to rely on
struct mnt_idmap.
Currently we still pass around the plain namespace that was attached
to a mount. This is in general pretty convenient but it makes it easy
to conflate namespaces that are relevant on the filesystem with
namespaces that are relevant on the mount level. Especially for
non-vfs developers without detailed knowledge in this area this was a
potential source for bugs.
This finishes the conversion. Instead of passing the plain namespace
around this updates all places that currently take a pointer to a
mnt_userns with a pointer to struct mnt_idmap.
Now that the conversion is done all helpers down to the really
low-level helpers only accept a struct mnt_idmap argument instead of
two namespace arguments.
Conflating mount and other idmappings will now cause the compiler to
complain loudly thus eliminating the possibility of any bugs. This
makes it impossible for filesystem developers to mix up mount and
filesystem idmappings as they are two distinct types and require
distinct helpers that cannot be used interchangeably.
Everything associated with struct mnt_idmap is moved into a single
separate file. With that change no code can poke around in struct
mnt_idmap. It can only be interacted with through dedicated helpers.
That means all filesystems are and all of the vfs is completely
oblivious to the actual implementation of idmappings.
We are now also able to extend struct mnt_idmap as we see fit. For
example, we can decouple it completely from namespaces for users that
don't require or don't want to use them at all. We can also extend
the concept of idmappings so we can cover filesystem specific
requirements.
In combination with the vfs{g,u}id_t work we finished in v6.2 this
makes this feature substantially more robust and thus difficult to
implement wrong by a given filesystem and also protects the vfs.
- Enable idmapped mounts for tmpfs and fulfill a longstanding request.
A long-standing request from users had been to make it possible to
create idmapped mounts for tmpfs. For example, to share the host's
tmpfs mount between multiple sandboxes. This is a prerequisite for
some advanced Kubernetes cases. Systemd also has a range of use-cases
to increase service isolation. And there are more users of this.
However, with all of the other work going on this was way down on the
priority list but luckily someone other than ourselves picked this
up.
As usual the patch is tiny as all the infrastructure work had been
done multiple kernel releases ago. In addition to all the tests that
we already have I requested that Rodrigo add a dedicated tmpfs
testsuite for idmapped mounts to xfstests. It is to be included into
xfstests during the v6.3 development cycle. This should add a slew of
additional tests.
* tag 'fs.idmapped.v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/idmapping: (26 commits)
shmem: support idmapped mounts for tmpfs
fs: move mnt_idmap
fs: port vfs{g,u}id helpers to mnt_idmap
fs: port fs{g,u}id helpers to mnt_idmap
fs: port i_{g,u}id_into_vfs{g,u}id() to mnt_idmap
fs: port i_{g,u}id_{needs_}update() to mnt_idmap
quota: port to mnt_idmap
fs: port privilege checking helpers to mnt_idmap
fs: port inode_owner_or_capable() to mnt_idmap
fs: port inode_init_owner() to mnt_idmap
fs: port acl to mnt_idmap
fs: port xattr to mnt_idmap
fs: port ->permission() to pass mnt_idmap
fs: port ->fileattr_set() to pass mnt_idmap
fs: port ->set_acl() to pass mnt_idmap
fs: port ->get_acl() to pass mnt_idmap
fs: port ->tmpfile() to pass mnt_idmap
fs: port ->rename() to pass mnt_idmap
fs: port ->mknod() to pass mnt_idmap
fs: port ->mkdir() to pass mnt_idmap
...
- New and improved irqdomain locking, closing a number of races that
became apparent now that we are able to probe drivers in parallel
- A bunch of OF node refcounting bugs have been fixed
- We now have a new IPI mux, lifted from the Apple AIC code and
made common. It is expected that riscv will eventually benefit
from it
- Two small fixes for the Broadcom L2 drivers
- Various cleanups and minor bug fixes
-----BEGIN PGP SIGNATURE-----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=ONcj
-----END PGP SIGNATURE-----
Merge tag 'irqchip-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into irq/core
Pull irqchip updates from Marc Zyngier:
- New and improved irqdomain locking, closing a number of races that
became apparent now that we are able to probe drivers in parallel
- A bunch of OF node refcounting bugs have been fixed
- We now have a new IPI mux, lifted from the Apple AIC code and
made common. It is expected that riscv will eventually benefit
from it
- Two small fixes for the Broadcom L2 drivers
- Various cleanups and minor bug fixes
Link: https://lore.kernel.org/r/20230218143452.3817627-1-maz@kernel.org
* zero all padding for KVM_GET_DEBUGREGS
* fix rST warning
* disable vPMU support on hybrid CPUs
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmPw5PsUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroNqaAf6A0zjrdY1KjSyvrcHr0NV6lUfU+Ye
lc5xrtAJDuO7kERgnqFGPeg3a72tA4a9tlFrTdqqQIrAxnvVn4JNP5gtD7UxfpOn
PELO7JUbG3/CV2oErTugH02n3lKN/pLSISAClFkO7uAL5sJEM2pXH+ws1CZ7F7kN
FbPdnmvzi7tnTpv3oJ+gVl2l0HZYTnH4DydFGo68O3lP+oFgRXznkF5rpMxAe6oK
93fvSWGabVCft278sSVq5XpYfKQSJb5j8KjB8L4qqAlRh0ZJA5haDZWQyaaJvNY0
oefFj9XYPpA08l8VqZ2ti5vE4b6e+o2/oTg3Nwf/5DrQxJiYOGTHKoA/NA==
=H68L
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm/x86 fixes from Paolo Bonzini:
- zero all padding for KVM_GET_DEBUGREGS
- fix rST warning
- disable vPMU support on hybrid CPUs
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
kvm: initialize all of the kvm_debugregs structure before sending it to userspace
perf/x86: Refuse to export capabilities for hybrid PMUs
KVM: x86/pmu: Disable vPMU support on hybrid CPUs (host PMUs)
Documentation/hw-vuln: Fix rST warning
Using "va" and "vb" doesn't match what's written on the board, or the
communications from StarFive.
Switching to using the silkscreened version number will ease confusion &
the risk of another spin of the board containing a "conflicting" version
identifier.
As the binding has not made it into mainline yet, take the opportunity
to "correct" things.
Suggested-by: Emil Renner Berthing <emil.renner.berthing@canonical.com>
Link: https://lore.kernel.org/linux-riscv/Y+4AxDSDLyL1WAqh@wendy/
Fixes: 97b7ed072784 ("dt-bindings: riscv: Add StarFive JH7110 SoC and VisionFive 2 board")
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230216131511.3327943-1-conor.dooley@microchip.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- Add support for the enclustra PE1 board that is based on Arria10
-----BEGIN PGP SIGNATURE-----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=8EYA
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=E8ON
-----END PGP SIGNATURE-----
Merge tag 'socfpga_dts_updates_for_v6.3_part2' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux into arm/dt
SoCFPGA dts updates for v6.3, part 2
- Add support for the enclustra PE1 board that is based on Arria10
* tag 'socfpga_dts_updates_for_v6.3_part2' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux:
ARM: dts: socfpga: Add enclustra PE1 devicetree
dt-bindings: altera: Add enclustra mercury PE1
Link: https://lore.kernel.org/r/20230216160910.509065-1-dinguyen@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Merge power management utilities and documentation updates for 6.3-rc1:
- Modify some power management utilities to use the canonical ftrace
path (Ross Zwisler).
- Correct spelling problems for Documentation/power/ as reported by
codespell (Randy Dunlap).
* pm-tools:
PM: tools: use canonical ftrace path
* pm-docs:
Documentation: power: correct spelling
Merge updates of the powercap framework, generic PM domains, Energy
Model and operating performance points for 6.3-rc1:
- Fix possible name leak in powercap_register_zone() (Yang Yingliang).
- Add Meteor Lake and Emerald Rapids support to the intel_rapl power
capping driver (Zhang Rui).
- Modify the idle_inject power capping facility to support 100% idle
injection (Srinivas Pandruvada).
- Fix large time windows handling in the intel_rapl power capping
driver (Zhang Rui).
- Fix memory leaks with using debugfs_lookup() in the generic PM
domains and Energy Model code (Greg Kroah-Hartman).
- Add missing 'cache-unified' property in example for kryo OPP bindings
(Rob Herring).
- Fix error checking in opp_migrate_dentry() (Qi Zheng).
- Remove "select SRCU" (Paul E. McKenney).
- Let qcom,opp-fuse-level be a 2-long array for qcom SoCs (Konrad
Dybcio).
* powercap:
powercap: intel_rapl: Fix handling for large time window
powercap: idle_inject: Support 100% idle injection
powercap: intel_rapl: add support for Emerald Rapids
powercap: intel_rapl: add support for Meteor Lake
powercap: fix possible name leak in powercap_register_zone()
* pm-domains:
PM: domains: fix memory leak with using debugfs_lookup()
* pm-em:
PM: EM: fix memory leak with using debugfs_lookup()
* pm-opp:
OPP: fix error checking in opp_migrate_dentry()
dt-bindings: opp: v2-qcom-level: Let qcom,opp-fuse-level be a 2-long array
drivers/opp: Remove "select SRCU"
dt-bindings: opp: opp-v2-kryo-cpu: Add missing 'cache-unified' property in example
Document support for the Thermal Sensor/Chip Internal Voltage
Monitor/Core Voltage Monitor (THS/CIVM/CVM) on the Renesas R-Car V4H
(R8A779G0) SoC.
Unlike most other R-Car Gen3 and Gen4 SoCs, it has 4 instead of 3
sensors, so increase the maximum number of reg tuples.
Just like other R-Car Gen4 SoCs, interrupts are not routed to the
INTC-AP but to the ECM.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Link: https://lore.kernel.org/r/11f740522ec479011cc8eef6bb450603be394def.1675958665.git.geert+renesas@glider.be
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Add LVTS thermal controllers dt-binding definition for mt8192 and mt8195.
Signed-off-by: Balsam CHIHI <bchihi@baylibre.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230209105628.50294-3-bchihi@baylibre.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Merge thermal control changes related to Intel platforms for 6.3-rc1:
- Rework ACPI helper functions for thermal control to retrieve a trip
point temperature instead of initializing a trip point objetc (Rafael
Wysocki).
- Clean up and improve the int340x thermal driver ((Rafael Wysocki).
- Simplify and clean up the intel_pch thermal driver ((Rafael Wysocki).
- Fix the Intel powerclamp thermal driver and make it use the common
idle injection framework (Srinivas Pandruvada).
- Add two module parameters, cpumask and max_idle, to the Intel powerclamp
thermal driver to allow it to affect only a specific subset of CPUs
instead of all of them (Srinivas Pandruvada).
- Make the Intel quark_dts thermal driver Use generic trip point
objects instead of its own trip point representation (Daniel
Lezcano).
- Add toctree entry for thermal documents and fix two issues in the
Intel powerclamp driver documentation (Bagas Sanjaya).
* thermal-intel: (25 commits)
Documentation: powerclamp: Fix numbered lists formatting
Documentation: powerclamp: Escape wildcard in cpumask description
Documentation: admin-guide: Add toctree entry for thermal docs
thermal: intel: powerclamp: Add two module parameters
Documentation: admin-guide: Move intel_powerclamp documentation
thermal: intel: powerclamp: Fix duration module parameter
thermal: intel: powerclamp: Return last requested state as cur_state
thermal: intel: quark_dts: Use generic trip points
thermal: intel: powerclamp: Use powercap idle-inject feature
powercap: idle_inject: Add update callback
powercap: idle_inject: Export symbols
thermal: intel: powerclamp: Fix cur_state for multi package system
thermal: intel: intel_pch: Drop struct board_info
thermal: intel: intel_pch: Rename board ID symbols
thermal: intel: intel_pch: Fold suspend and resume routines into their callers
thermal: intel: intel_pch: Fold two functions into their callers
thermal: intel: intel_pch: Eliminate device operations object
thermal: intel: intel_pch: Rename device operations callbacks
thermal: intel: intel_pch: Eliminate redundant return pointers
thermal: intel: intel_pch: Make pch_wpt_add_acpi_psv_trip() return int
...
kernel test robot reported htmldocs warning:
Documentation/admin-guide/pm/amd-pstate.rst:343: WARNING: duplicate label admin-guide/pm/amd-pstate:user space interface in ``sysfs``, other instance in Documentation/admin-guide/pm/amd-pstate.rst
The documentation contains two sections with the same "User Space Interface
in ``sysfs``" title. The first one deals with per-policy sysfs and the
second one is about general attributes (currently only global attributes
are documented).
Disambiguate title text of both sections to fix the warning.
Link: https://lore.kernel.org/linux-doc/202302151041.0SWs1RHK-lkp@intel.com/
Fixes: b9e6a2d47b2565 ("Documentation: amd-pstate: introduce new global sysfs attributes")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Reviewed-by: Wyes Karny <wyes.karny@amd.com>
Acked-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Merge ACPI backlight driver changes, miscellaneous ACPI-related changes
and ACPI-related documentation updates for 6.3-rc1:
- Fix Lenovo Ideapad Z570 DMI match in the ACPI backlight driver (Hans
de Goede).
- Silence missing prototype warnings in some places in the ACPI-related
code (Ammar Faizi).
- Make kobj_type structures used in the ACPI code constant (Thomas
Weißschuh).
- Correct spelling in firmware-guide/ACPI (Randy Dunlap).
- Clarify the meaning of Explicit and Implicit in the _DSD GPIO
properties documentation (Andy Shevchenko).
* acpi-video:
ACPI: video: Fix Lenovo Ideapad Z570 DMI match
* acpi-misc:
ACPI: make kobj_type structures constant
ACPI: Silence missing prototype warnings
* acpi-docs:
Documentation: firmware-guide: gpio-properties: Clarify Explicit and Implicit
Documentation: firmware-guide/ACPI: correct spelling
The following warning:
Documentation/admin-guide/hw-vuln/cross-thread-rsb.rst:92: ERROR: Unexpected indentation.
was introduced by commit 493a2c2d23ca. Fix it by placing everything in
the same paragraph and also use a monospace font.
Fixes: 493a2c2d23ca ("Documentation/hw-vuln: Add documentation for Cross-Thread Return Predictions")
Reported-by: Stephen Rothwell <sfr@canb@auug.org.au>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
predictions bug. When running in SMT mode and one of the sibling threads
transitions out of C0 state, the other thread gets access to twice as many
entries in the RSB, but unfortunately the predictions of the now-halted
logical processor are not purged. Therefore, the executing processor
could speculatively execute from locations that the now-halted processor
had trained the RSB on.
The Spectre v2 mitigations cover the Linux kernel, as it fills the RSB
when context switching to the idle thread. However, KVM allows a VMM to
prevent exiting guest mode when transitioning out of C0 using the
KVM_CAP_X86_DISABLE_EXITS capability can be used by a VMM to change this
behavior. To mitigate the cross-thread return address predictions bug,
a VMM must not be allowed to override the default behavior to intercept
C0 transitions.
These patches introduce a KVM module parameter that, if set, will prevent
the user from disabling the HLT, MWAIT and CSTATE exits.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmPrvAAUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroMQAgf8CirL+yrngzQ+39UTFQgXj3IS1UyR
o2mF39w3bVlQhLNf5MBHF965FUeOV/8A16x73hJGjhiiuisphtQWS/6xKR6uYbq7
0Qi821skqN6XpRsWTWqFHMsdY+n0skr8QeXG4k/GJu7Ghb3tqs4eTGgnf2WBfI8/
K1UgTmjd9+ikM5gKZoVLpcqZnti0gx3lM+cvZGdfrIUaXB+i+hNd2NfRTiGsTOiK
fX7vZtLvOeje2TPoKLhzekTbh8kTU07HRWID9aVXT8bLy6Zd6tg2CHlv11noKpwv
DFVV+RsJ1SiAQYSwT+4IvWfIG4oq4onBQ972g2a27pP2cxF+38GXzt4NQw==
=xscg
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
"Certain AMD processors are vulnerable to a cross-thread return address
predictions bug. When running in SMT mode and one of the sibling
threads transitions out of C0 state, the other thread gets access to
twice as many entries in the RSB, but unfortunately the predictions of
the now-halted logical processor are not purged. Therefore, the
executing processor could speculatively execute from locations that
the now-halted processor had trained the RSB on.
The Spectre v2 mitigations cover the Linux kernel, as it fills the RSB
when context switching to the idle thread. However, KVM allows a VMM
to prevent exiting guest mode when transitioning out of C0 using the
KVM_CAP_X86_DISABLE_EXITS capability can be used by a VMM to change
this behavior. To mitigate the cross-thread return address predictions
bug, a VMM must not be allowed to override the default behavior to
intercept C0 transitions.
These patches introduce a KVM module parameter that, if set, will
prevent the user from disabling the HLT, MWAIT and CSTATE exits"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
Documentation/hw-vuln: Add documentation for Cross-Thread Return Predictions
KVM: x86: Mitigate the cross-thread return address predictions bug
x86/speculation: Identify processors vulnerable to SMT RSB predictions
Clarify the Explicit and Implicit meanings in the table of Pull Bias.
While at it, distinguish pull bias keywords used in ACPI by using bold
font in the table of the respective terms.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
- Add missing 'cache-unified' property in example for kryo OPP bindings
(Rob Herring).
- Fix error checking in opp_migrate_dentry() (Qi Zheng).
- Remove "select SRCU" (Paul E. McKenney).
- Let qcom,opp-fuse-level be a 2-long array for qcom SoCs (Konrad
Dybcio).
-----BEGIN PGP SIGNATURE-----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=wSRZ
-----END PGP SIGNATURE-----
Merge tag 'opp-updates-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm
Pull OPP (Operating Performance Points) updates for 6.3 from Viresh
Kumar:
"- Add missing 'cache-unified' property in example for kryo OPP bindings
(Rob Herring).
- Fix error checking in opp_migrate_dentry() (Qi Zheng).
- Remove "select SRCU" (Paul E. McKenney).
- Let qcom,opp-fuse-level be a 2-long array for qcom SoCs (Konrad
Dybcio)."
* tag 'opp-updates-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm:
OPP: fix error checking in opp_migrate_dentry()
dt-bindings: opp: v2-qcom-level: Let qcom,opp-fuse-level be a 2-long array
drivers/opp: Remove "select SRCU"
dt-bindings: opp: opp-v2-kryo-cpu: Add missing 'cache-unified' property in example
- Enable thermal cooling for Tegra194 (Yi-Wei Wang).
- Register module device table and add missing compatibles for
cpufreq-qcom-hw (Nícolas F. R. A. Prado, Abel Vesa and Luca Weiss).
- Various dt binding updates for qcom-cpufreq-nvmem and opp-v2-kryo-cpu
(Christian Marangi).
-----BEGIN PGP SIGNATURE-----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=dCgg
-----END PGP SIGNATURE-----
Merge tag 'cpufreq-arm-updates-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm
Pull cpufreq ARM updates for 6.3 from Viresh Kumar:
"- Enable thermal cooling for Tegra194 (Yi-Wei Wang).
- Register module device table and add missing compatibles for
cpufreq-qcom-hw (Nícolas F. R. A. Prado, Abel Vesa and Luca Weiss).
- Various dt binding updates for qcom-cpufreq-nvmem and opp-v2-kryo-cpu
(Christian Marangi)."
* tag 'cpufreq-arm-updates-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm:
dt-bindings: opp: opp-v2-kryo-cpu: enlarge opp-supported-hw maximum
dt-bindings: cpufreq: qcom-cpufreq-nvmem: make cpr bindings optional
dt-bindings: cpufreq: qcom-cpufreq-nvmem: specify supported opp tables
dt-bindings: cpufreq: cpufreq-qcom-hw: Add SM8550 compatible
dt-bindings: cpufreq: cpufreq-qcom-hw: Add missing compatibles
cpufreq: mediatek-hw: Register to module device table
cpufreq: tegra194: Enable CPUFREQ thermal cooling
Enlarge opp-supported-hw maximum value. In recent SoC we started
matching more bit and we currently match mask of 112. The old maximum of
7 was good for old SoC that didn't had complex id, but now this is
limiting and we need to enlarge it to support more variants.
Document all the various mask that can be used and limit them to only
reasonable values instead of using a generic maximum limit.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
The qcom-cpufreq-nvmem driver supports 2 kind of devices:
- pre-cpr that doesn't have power-domains and base everything on nvmem
cells and multiple named microvolt bindings.
Doesn't need required-opp binding in the opp nodes as they are only
used for genpd based devices.
- cpr-based that require power-domain in the cpu nodes and use various
source to decide the correct voltage and freq
Require required-opp binding since they need to be linked to the
related opp-level.
When the schema was introduced, it was wrongly set to always require these
binding but this is not the case for pre-cpr devices.
Make the power-domain and the required-opp optional and set them required
only for qcs404 based devices.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Add additional info on what opp tables the defined devices in this schema
supports (operating-points-v2-kryo-cpu and operating-points-v2-qcom-level)
and reference them.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
This pull request contains the following:
o Improvements to clocksource-watchdog console messages.
o Loosening of the clocksource-watchdog skew criteria to match
those of NTP (500 parts per million, relaxed from 400 parts
per million). If it is good enough for NTP, it is good enough
for the clocksource watchdog.
o Suspend clocksource-watchdog checking temporarily when high
memory latencies are detected. This avoids the false-positive
clock-skew events that have been seen on production systems
running memory-intensive workloads.
o On systems where the TSC is deemed trustworthy, use it as the
watchdog timesource, but only when specifically requested using
the tsc=watchdog kernel boot parameter. This permits clock-skew
events to be detected, but avoids forcing workloads to use the
slow HPET and ACPI PM timers. These last two timers are slow
enough to cause systems to be needlessly marked bad on the one
hand, and real skew does sometimes happen on production systems
running production workloads on the other. And sometimes it is
the fault of the TSC, or at least of the firmware that told the
kernel to program the TSC with the wrong frequency.
o Add a tsc=revalidate kernel boot parameter to allow the kernel
to diagnose cases where the TSC hardware works fine, but was told
by firmware to tick at the wrong frequency. Such cases are rare,
but they really have happened on production systems.
-----BEGIN PGP SIGNATURE-----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=OWY2
-----END PGP SIGNATURE-----
Merge tag 'clocksource.2023.02.06b' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu into timers/core
Pull clocksource watchdog changes from Paul McKenney:
o Improvements to clocksource-watchdog console messages.
o Loosening of the clocksource-watchdog skew criteria to match
those of NTP (500 parts per million, relaxed from 400 parts
per million). If it is good enough for NTP, it is good enough
for the clocksource watchdog.
o Suspend clocksource-watchdog checking temporarily when high
memory latencies are detected. This avoids the false-positive
clock-skew events that have been seen on production systems
running memory-intensive workloads.
o On systems where the TSC is deemed trustworthy, use it as the
watchdog timesource, but only when specifically requested using
the tsc=watchdog kernel boot parameter. This permits clock-skew
events to be detected, but avoids forcing workloads to use the
slow HPET and ACPI PM timers. These last two timers are slow
enough to cause systems to be needlessly marked bad on the one
hand, and real skew does sometimes happen on production systems
running production workloads on the other. And sometimes it is
the fault of the TSC, or at least of the firmware that told the
kernel to program the TSC with the wrong frequency.
o Add a tsc=revalidate kernel boot parameter to allow the kernel
to diagnose cases where the TSC hardware works fine, but was told
by firmware to tick at the wrong frequency. Such cases are rare,
but they really have happened on production systems.
Link: https://lore.kernel.org/r/20230210193640.GA3325193@paulmck-ThinkPad-P17-Gen-1
Texts in numbered lists are rendered as continous paragraph when there
should have been breaks between first line text in the beginning of list
item and the description. Fix this by adding appropriate line breaks and
indent the rest of lines to match the first line of numbered list item.
Fixes: d6d71ee4a14ae6 ("PM: Introduce Intel PowerClamp Driver")
Fixes: 6bbe6f5732faea ("docs: thermal: convert to ReST")
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
kernel test robot reported htmldocs warning:
Documentation/admin-guide/thermal/intel_powerclamp.rst:328: WARNING: Inline emphasis start-string without end-string.
The mistaken asterisk in /proc/irq/*/smp_affinity is rendered as hyperlink
as the result.
Escape the asterisk to fix above warning.
Link: https://lore.kernel.org/linux-doc/202302122247.N4S791c4-lkp@intel.com/
Fixes: ebf51971021881 ("thermal: intel: powerclamp: Add two module parameters")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The new Qualcomm QDU1000 and QRU1000 platforms, and the IDP device on
these are introduced. New support for a couple of USB modem sticks from
THWC are introduced, so is support for Xiaomi Mi Pad 5 Pro and the Pro
SKU of the Herobrine device.
The Core Bus Fabric (CBF) is introduced on MSM8996. Interconnect paths
for UFS are also described.
A few fixes related to the power-grid of herobrine, on SC7280, are
introduced.
QFPROM is introduced on IPQ8074 and Interconnect providers are added for
SDM670.
On SDM845 the duplicated wcd9340 audio coded description is moved from
devices to a common file, audio devices are added to the OnePlus 6 and
6T.
On SM6115 debug UART, SMP2P, watchdog nodes are introduced, and the
platform is switched to use #address/size-cells of 2, in line with most
other platforms.
Camera control interface and clock controllers are added for SM6350, and
the CCI interface is enabled on the Fairphone FP4.
On SM8350 the interconnect reference of SDHCI controller is corrected,
DSI1 PHY clocks are properly described as sources for the Display clock
controller and DSI1 is wired up to the display controller.
The firmware paths are corrected for the Sony Xperia Nagara platform.
The GPR bus, audio servic3es and LPASS pinctrl nodes are added for the
SM8550 platform. Additionally a few small typos/errors are corrected.
gpio-ranges are corrected across MSM8953, SM6115 and SC8280XP and a
range of DT validation issues are corrected.
-----BEGIN PGP SIGNATURE-----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=wSbI
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=nzqV
-----END PGP SIGNATURE-----
Merge tag 'qcom-arm64-for-6.3-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/dt
More Qualcomm ARM64 DT updates for 6.3
The new Qualcomm QDU1000 and QRU1000 platforms, and the IDP device on
these are introduced. New support for a couple of USB modem sticks from
THWC are introduced, so is support for Xiaomi Mi Pad 5 Pro and the Pro
SKU of the Herobrine device.
The Core Bus Fabric (CBF) is introduced on MSM8996. Interconnect paths
for UFS are also described.
A few fixes related to the power-grid of herobrine, on SC7280, are
introduced.
QFPROM is introduced on IPQ8074 and Interconnect providers are added for
SDM670.
On SDM845 the duplicated wcd9340 audio coded description is moved from
devices to a common file, audio devices are added to the OnePlus 6 and
6T.
On SM6115 debug UART, SMP2P, watchdog nodes are introduced, and the
platform is switched to use #address/size-cells of 2, in line with most
other platforms.
Camera control interface and clock controllers are added for SM6350, and
the CCI interface is enabled on the Fairphone FP4.
On SM8350 the interconnect reference of SDHCI controller is corrected,
DSI1 PHY clocks are properly described as sources for the Display clock
controller and DSI1 is wired up to the display controller.
The firmware paths are corrected for the Sony Xperia Nagara platform.
The GPR bus, audio servic3es and LPASS pinctrl nodes are added for the
SM8550 platform. Additionally a few small typos/errors are corrected.
gpio-ranges are corrected across MSM8953, SM6115 and SC8280XP and a
range of DT validation issues are corrected.
* tag 'qcom-arm64-for-6.3-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (81 commits)
arm64: dts: qcom: sc7280: Power herobrine's 3.3 eDP/TS rail more properly
arm64: dts: qcom: pmk8550: fix PON compatible
arm64: dts: qcom: sm8550: fix DSI controller compatible
arm64: dts: qcom: sc7280: Hook up the touchscreen IO rail on evoker
arm64: dts: qcom: sc7280: Hook up the touchscreen IO rail on villager
arm64: dts: qcom: sc7280: Add 3ms ramp to herobrine's pp3300_left_in_mlb
arm64: dts: qcom: sc7280: On QCard, regulator L3C should be 1.8V
arm64: dts: qcom: sc8280xp: correct LPASS GPIO gpio-ranges
arm64: dts: qcom: msm8992-lg-bullhead: Enable regulators
arm64: dts: qcom: sm6115: correct TLMM gpio-ranges
arm64: dts: qcom: msm8953: correct TLMM gpio-ranges
arm64: dts: qcom: msm8992-lg-bullhead: Correct memory overlaps with the SMEM and MPSS memory regions
arm64: dts: qcom: sm8350-hdk: correct LT9611 pin function
arm64: dts: qcom: sm8350-hdk: align pin config node names with bindings
arm64: dts: qcom: sm6350: Use specific qmpphy compatible
arm64: dts: qcom: sm6115: Add smp2p nodes
arm64: dts: qcom: sm7225-fairphone-fp4: Enable CCI busses
arm64: dts: qcom: sm6350: Add CCI nodes
arm64: dts: qcom: sm6350: Add camera clock controller
dt-bindings: clock: add QCOM SM6350 camera clock bindings
...
Link: https://lore.kernel.org/r/20230210192908.2039976-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
T-Head C906/C910 CLINT is not compliant to SiFive ones (and even not
compliant to the newcoming ACLINT spec) because of lack of mtime
register.
Add a compatible string formatted like the C9xx-specific PLIC
compatible, and do not allow a SiFive one as fallback because they're
not really compliant.
Signed-off-by: Icenowy Zheng <uwu@icenowy.me>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Samuel Holland <samuel@sholland.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230202072814.319903-1-uwu@icenowy.me
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Add binding description for mediatek,mt8365-systimer
Signed-off-by: Bernhard Rosenkränzer <bero@baylibre.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230125143503.1015424-8-bero@baylibre.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
We add DT bindings for a separate RISC-V timer DT node which can
be used to describe implementation specific behaviour (such as
timer interrupt not triggered during non-retentive suspend).
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Link: https://lore.kernel.org/r/20230103141102.772228-3-apatel@ventanamicro.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@kernel.org>
KP Singh
Linus Torvalds
Thomas Gleixner
Conor Dooley
Arnd Bergmann
Steffen Trumtrar
Rafael J. Wysocki
Geert Uytterhoeven
Balsam CHIHI
Bagas Sanjaya
Paolo Bonzini
Yue Hu
Andy Shevchenko
Christian Marangi
Icenowy Zheng
Bernhard Rosenkränzer
Anup Patel