IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
There is a confusing pattern in the kernel to use a variable named 'timeout' to
store the result of wait_for_completion_timeout() causing patterns like:
timeout = wait_for_completion_timeout(...)
if (!timeout) return -ETIMEDOUT;
with all kinds of permutations. Use 'time_left' as a variable to make the code
self explaining.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
iMX8ULP have a secure-enclave hardware IP called EdgeLock Enclave(ELE),
that control access to caam controller's register page, i.e., page0.
At all, if the ELE release access to CAAM controller's register page,
it will release to secure-world only.
Clocks are turned on automatically for iMX8ULP. There exists the caam
clock gating bit, but it is not advised to gate the clock at linux, as
optee-os or any other entity might be using it.
Signed-off-by: Pankaj Gupta <pankaj.gupta@nxp.com>
Reviewed-by: Gaurav Jain <gaurav.jain@nxp.com>
Reviewed-by: Horia Geanta <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
CAAM clock initializat is done based on the basis of soc specific
info stored in struct caam_imx_data:
- caam-page0-access flag
- num_clks
CAAM driver needs to be aware of access rights to CAAM control page
i.e., page0, to do things differently.
Signed-off-by: Pankaj Gupta <pankaj.gupta@nxp.com>
Reviewed-by: Gaurav Jain <gaurav.jain@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Dma address mapping fails on unaligned scatterlist offset. Use sw
fallback for these cases.
Signed-off-by: Jia Jie Ho <jiajie.ho@starfivetech.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
RSA text data uses variable length buffer allocated in software stack.
Calling kfree on it causes undefined behaviour in subsequent operations.
Cc: <stable@vger.kernel.org> #6.7+
Signed-off-by: Jia Jie Ho <jiajie.ho@starfivetech.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Skip sw fallback allocation if RSA module failed to get device handle.
Signed-off-by: Jia Jie Ho <jiajie.ho@starfivetech.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Skip dma setup and mapping for AES driver if plaintext is empty.
Signed-off-by: Jia Jie Ho <jiajie.ho@starfivetech.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The offset of SEC_CORE_ENABLE_BITMAP should be 0 instead of 32,
it cause a kasan shift-out-bounds warning, fix it.
Signed-off-by: Wenkai Lin <linwenkai6@hisilicon.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Some information showed by the dump function is invalid. Mask
the unnecessary information from the dump file.
Signed-off-by: Chenghai Huang <huangchenghai2@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The 4xxx driver can probe 4xxx and 402xx devices. However, the driver
only specifies the firmware images required for 4xxx.
This might result in external tools missing these binaries, if required,
in the initramfs.
Specify the firmware image used by 402xx with the MODULE_FIRMWARE()
macros in the 4xxx driver.
Fixes: a3e8c919b9 ("crypto: qat - add support for 402xx devices")
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Damian Muszynski <damian.muszynski@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The function adf_send_admin_tl_start() enables the telemetry (TL)
feature on a QAT device by sending the ICP_QAT_FW_TL_START message to
the firmware. This triggers the FW to start writing TL data to a DMA
buffer in memory and returns an array containing the number of
accelerators of each type (slices) supported by this HW.
The pointer to this array is stored in the adf_tl_hw_data data
structure called slice_cnt.
The array slice_cnt is then used in the function tl_print_dev_data()
to report in debugfs only statistics about the supported accelerators.
An incorrect value of the elements in slice_cnt might lead to an out
of bounds memory read.
At the moment, there isn't an implementation of FW that returns a wrong
value, but for robustness validate the slice count array returned by FW.
Fixes: 69e7649f7c ("crypto: qat - add support for device telemetry")
Signed-off-by: Lucas Segarra Fernandez <lucas.segarra.fernandez@intel.com>
Reviewed-by: Damian Muszynski <damian.muszynski@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Fixes: 0880bb3b00 ("crypto: tegra - Add Tegra Security Engine driver")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Akhil R <akhilrajeev@nvidia.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Due to a lack of alignment in the data sent by requests, the actual DMA
support of the STM32 hash driver is only working with digest calls.
This patch, based on the algorithm used in the driver omap-sham.c,
allows for the usage of DMA in any situation.
It has been functionally tested on STM32MP15, STM32MP13 and STM32MP25.
By checking the performance of this new driver with OpenSSL, the
following results were found:
Performance:
(datasize: 4096, number of hashes performed in 10s)
|type |no DMA |DMA support|software |
|-------|----------|-----------|----------|
|md5 |13873.56k |10958.03k |71163.08k |
|sha1 |13796.15k |10729.47k |39670.58k |
|sha224 |13737.98k |10775.76k |22094.64k |
|sha256 |13655.65k |10872.01k |22075.39k |
CPU Usage:
(algorithm used: sha256, computation time: 20s, measurement taken at
~10s)
|datasize |no DMA |DMA | software |
|----------|-------|-----|----------|
| 2048 | 56% | 49% | 50% |
| 4096 | 54% | 46% | 50% |
| 8192 | 53% | 40% | 50% |
| 16384 | 53% | 33% | 50% |
Note: this update doesn't change the driver performance without DMA.
As shown, performance with DMA is slightly lower than without, but in
most cases, it will save CPU time.
Signed-off-by: Maxime Méré <maxime.mere@foss.st.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Improve error logging in rate limiting feature. Staying consistent with
the error logging found in the telemetry feature.
Fixes: d9fb840837 ("crypto: qat - add rate limiting feature to qat_4xxx")
Signed-off-by: Adam Guerin <adam.guerin@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Improve error message to be more readable.
Fixes: 5da6a2d535 ("crypto: qat - generate dynamically arbiter mappings")
Signed-off-by: Adam Guerin <adam.guerin@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The Intel QAT driver provides support for the Diffie-Hellman (DH)
algorithm, limited to prime numbers up to 4K. This driver is used
by default on platforms with integrated QAT hardware for all DH requests.
This has led to failures with algorithms requiring larger prime sizes,
such as ffdhe6144.
alg: ffdhe6144(dh): test failed on vector 1, err=-22
alg: self-tests for ffdhe6144(qat-dh) (ffdhe6144(dh)) failed (rc=-22)
Implement a fallback mechanism when an unsupported request is received.
Signed-off-by: Damian Muszynski <damian.muszynski@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add check for dma_map_single() and return error if it fails in order
to avoid invalid dma address.
Fixes: e92971117c ("crypto: octeontx2 - add ctx_val workaround")
Signed-off-by: Chen Ni <nichen@iscas.ac.cn>
Reviewed-by: Bharat Bhushan <bbhushan2@marvell.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
When the qm uninit command is executed, the err data needs to
be released to prevent memory leakage. The error information
release operation and uacce_remove are integrated in
qm_remove_uacce.
So add the qm_remove_uacce to qm uninit to avoid err memory
leakage.
Signed-off-by: Chenghai Huang <huangchenghai2@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
When dumping SQ, only the corresponding ID's SQE needs to be
dumped, and there is no need to apply for the entire SQE
memory. This is because excessive dump operations can lead to
memory resource waste.
Therefor apply for the space corresponding to sqe_id separately
to avoid space waste.
Signed-off-by: Chenghai Huang <huangchenghai2@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The AIV is one of the SEC resources. When releasing resources,
it need to release the AIV resources at the same time.
Otherwise, memory leakage occurs.
The aiv resource release is added to the sec resource release
function.
Signed-off-by: Chenghai Huang <huangchenghai2@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
There is a scenario where the file directory is created but the
file memory is not set. In this case, if a user accesses the
file, an error occurs.
So during the creation process of debugfs, memory should be
allocated first before creating the directory. In the release
process, the directory should be deleted first before releasing
the memory to avoid the situation where the memory does not
exist when accessing the directory.
In addition, the directory released by the debugfs is a global
variable. When the debugfs of an accelerator fails to be
initialized, releasing the directory of the global variable
affects the debugfs initialization of other accelerators.
The debugfs root directory released by debugfs init should be a
member of qm, not a global variable.
Signed-off-by: Chenghai Huang <huangchenghai2@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The cmd type can be extended. Currently, only four types of cmd
can be processed. Therefor, add the default processing branch
to intercept incorrect parameter input.
Signed-off-by: Chenghai Huang <huangchenghai2@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
There is a scenario where the file directory is created but the
file attribute is not set. In this case, if a user accesses the
file, an error occurs.
So adjust the processing logic in the debugfs creation to
prevent the file from being accessed before the file attributes
such as the index are set.
Signed-off-by: Chenghai Huang <huangchenghai2@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The input parameter check in acc_get_sgl is redundant. The
caller has been verified once. When the check is performed for
multiple times, the performance deteriorates.
So the redundant parameter verification is deleted, and the
index verification is changed to the module entry function for
verification.
Signed-off-by: Chenghai Huang <huangchenghai2@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
During the zip probe process, the debugfs failure does not stop
the probe. When debugfs initialization fails, jumping to the
error branch will also release regs, in addition to its own
rollback operation.
As a result, it may be released repeatedly during the regs
uninit process. Therefore, the null check needs to be added to
the regs uninit process.
Signed-off-by: Chenghai Huang <huangchenghai2@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
When CONFIG_PCI_IOV is disabled, the SRIOV configuration
function is not required. An error occurs if this function is
incorrectly called.
Consistent with other modules, add the condition for
configuring the sriov function of sec_pci_driver.
Signed-off-by: Chenghai Huang <huangchenghai2@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
If some cpus are offlined, or if the node mask is smaller than
expected, the 'nonexistent cpu' warning in rebalance_wq_table() may be
erroneously triggered.
Use cpumask_weight() to make sure we only iterate over the exact
number of cpus in the mask.
Also use num_possible_cpus() instead of num_online_cpus() to make sure
all slots in the wq table are initialized.
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add support for Tegra Security Engine which can accelerate various
crypto algorithms. The Engine has two separate instances within for
AES and HASH algorithms respectively.
The driver registers two crypto engines - one for AES and another for
HASH algorithms and these operate independently and both uses the host1x
bus. Additionally, it provides hardware-assisted key protection for up
to 15 symmetric keys which it can use for the cipher operations.
Signed-off-by: Akhil R <akhilrajeev@nvidia.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
When both ACPI and OF are disabled, the dev_vdata variable is unused:
drivers/crypto/ccp/sp-platform.c:33:34: error: unused variable 'dev_vdata' [-Werror,-Wunused-const-variable]
This is not a useful configuration, and there is not much point in saving
a few bytes when only one of the two is enabled, so just remove all
these ifdef checks and rely on of_match_node() and acpi_match_device()
returning NULL when these subsystems are disabled.
Fixes: 6c50634340 ("crypto: ccp - Add ACPI support")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
There is a spelling mistake in a dev_err message. Fix it.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Acked-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-Wflex-array-member-not-at-end is coming in GCC-14, and we are getting
ready to enable it globally.
Use the `__struct_group()` helper to separate the flexible array
from the rest of the members in flexible `struct qat_alg_buf_list`,
through tagged `struct qat_alg_buf_list_hdr`, and avoid embedding the
flexible-array member in the middle of `struct qat_alg_fixed_buf_list`.
Also, use `container_of()` whenever we need to retrieve a pointer to
the flexible structure.
So, with these changes, fix the following warnings:
drivers/crypto/intel/qat/qat_common/qat_bl.h:25:33: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
drivers/crypto/intel/qat/qat_common/qat_bl.h:25:33: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
drivers/crypto/intel/qat/qat_common/qat_bl.h:25:33: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
drivers/crypto/intel/qat/qat_common/qat_bl.h:25:33: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
drivers/crypto/intel/qat/qat_common/qat_bl.h:25:33: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
drivers/crypto/intel/qat/qat_common/qat_bl.h:25:33: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
drivers/crypto/intel/qat/qat_common/qat_bl.h:25:33: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
drivers/crypto/intel/qat/qat_common/qat_bl.h:25:33: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
Link: https://github.com/KSPP/linux/issues/202
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Acked-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
In spu2_dump_omd() value of ptr is increased by ciph_key_len
instead of hash_iv_len which could lead to going beyond the
buffer boundaries.
Fix this bug by changing ciph_key_len to hash_iv_len.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 9d12ba86f8 ("crypto: brcm - Add Broadcom SPU driver")
Signed-off-by: Aleksandr Mishin <amishin@t-argos.ru>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-Wflex-array-member-not-at-end is coming in GCC-14, and we are getting
ready to enable it globally. So, we are deprecating flexible-array
members in the middle of another structure.
There is currently an object (`header`) in `struct nx842_crypto_ctx`
that contains a flexible structure (`struct nx842_crypto_header`):
struct nx842_crypto_ctx {
...
struct nx842_crypto_header header;
struct nx842_crypto_header_group group[NX842_CRYPTO_GROUP_MAX];
...
};
So, in order to avoid ending up with a flexible-array member in the
middle of another struct, we use the `struct_group_tagged()` helper to
separate the flexible array from the rest of the members in the flexible
structure:
struct nx842_crypto_header {
struct_group_tagged(nx842_crypto_header_hdr, hdr,
... the rest of the members
);
struct nx842_crypto_header_group group[];
} __packed;
With the change described above, we can now declare an object of the
type of the tagged struct, without embedding the flexible array in the
middle of another struct:
struct nx842_crypto_ctx {
...
struct nx842_crypto_header_hdr header;
struct nx842_crypto_header_group group[NX842_CRYPTO_GROUP_MAX];
...
} __packed;
We also use `container_of()` whenever we need to retrieve a pointer to
the flexible structure, through which we can access the flexible
array if needed.
So, with these changes, fix the following warning:
In file included from drivers/crypto/nx/nx-842.c:55:
drivers/crypto/nx/nx-842.h:174:36: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
174 | struct nx842_crypto_header header;
| ^~~~~~
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Convert AES module to use dma for data transfers to reduce cpu load and
compatible with future variants.
Signed-off-by: Jia Jie Ho <jiajie.ho@starfivetech.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Skip unneeded kfree_sensitive if RSA module is using falback algo.
Signed-off-by: Jia Jie Ho <jiajie.ho@starfivetech.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Current hash uses sw fallback for non-word aligned input scatterlists.
Add support for unaligned cases utilizing the data valid mask for dma.
Signed-off-by: Jia Jie Ho <jiajie.ho@starfivetech.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Change all the iaa statistics to use atomic64_t instead of the current
u64, to avoid potentially inconsistent counts.
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Currently, the wq_stats output also includes the global stats, while
the individual global stats are also available as separate debugfs
files. Since these are all read-only, there's really no reason to
have them as separate files, especially since we already display them
as global stats in the wq_stats. It makes more sense to just add a
separate global_stats file to display those, and remove them from the
wq_stats, as well as removing the individual stats files.
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
As part of the simplification/cleanup of the iaa statistics, remove
the comp/decomp delay statistics.
They're actually not really useful and can be/are being more flexibly
generated using standard kernel tracing infrastructure.
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Decomp stats should use slen, not dlen. Change both the global and
per-wq stats to use the correct value.
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add logic to implement the interface for live migration defined in
qat/qat_mig_dev.h. This is specific for QAT GEN4 Virtual Functions
(VFs).
This introduces a migration data manager which is used to handle the
device state during migration. The manager ensures that the device state
is stored in a format that can be restored in the destination node.
The VF state is organized into a hierarchical structure that includes a
preamble, a general state section, a MISC bar section and an ETR bar
section. The latter contains the state of the 4 ring pairs contained on
a VF. Here is a graphical representation of the state:
preamble | general state section | leaf state
| MISC bar state section| leaf state
| ETR bar state section | bank0 state section | leaf state
| bank1 state section | leaf state
| bank2 state section | leaf state
| bank3 state section | leaf state
In addition to the implementation of the qat_migdev_ops interface and
the state manager framework, add a mutex in pfvf to avoid pf2vf messages
during migration.
Signed-off-by: Xin Zeng <xin.zeng@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Extend the driver with a new interface to be used for VF live migration.
This allows to create and destroy a qat_mig_dev object that contains
a set of methods to allow to save and restore the state of QAT VF.
This interface will be used by the qat-vfio-pci module.
Signed-off-by: Xin Zeng <xin.zeng@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add logic to save, restore, quiesce and drain a ring bank for QAT GEN4
devices.
This allows to save and restore the state of a Virtual Function (VF) and
will be used to implement VM live migration.
Signed-off-by: Siming Wan <siming.wan@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Xin Zeng <xin.zeng@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Extend the CSR operations for QAT GEN4 devices to allow saving and
restoring the rings state.
The new operations will be used as a building block for implementing the
state save and restore of Virtual Functions necessary for VM live
migration.
This adds the following operations:
- read ring status register
- read ring underflow/overflow status register
- read ring nearly empty status register
- read ring nearly full status register
- read ring full status register
- read ring complete status register
- read ring exception status register
- read/write ring exception interrupt mask register
- read ring configuration register
- read ring base register
- read/write ring interrupt enable register
- read ring interrupt flag register
- read/write ring interrupt source select register
- read ring coalesced interrupt enable register
- read ring coalesced interrupt control register
- read ring flag and coalesced interrupt enable register
- read ring service arbiter enable register
- get ring coalesced interrupt control enable mask
Signed-off-by: Siming Wan <siming.wan@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Xin Zeng <xin.zeng@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The function get_sla_arr_of_type() returns a pointer to an SLA type
specific array.
Rename it and expose it as it will be used externally to this module.
This does not introduce any functional change.
Signed-off-by: Siming Wan <siming.wan@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Damian Muszynski <damian.muszynski@intel.com>
Signed-off-by: Xin Zeng <xin.zeng@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
As the common hw_data files are growing and the adf_hw_csr_ops is going
to be extended with new operations, move all logic related to ring CSRs
to the newly created adf_gen[2|4]_hw_csr_data.[c|h] files.
This does not introduce any functional change.
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Xin Zeng <xin.zeng@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Move the code that implements VF version compatibility on the PF side to
a separate function so that it can be reused when doing VM live
migration.
This does not introduce any functional change.
Signed-off-by: Xin Zeng <xin.zeng@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Move and rename ADF_4XXX_PF2VM_OFFSET and ADF_4XXX_VM2PF_OFFSET to
ADF_GEN4_PF2VM_OFFSET and ADF_GEN4_VM2PF_OFFSET respectively.
These definitions are moved from adf_gen4_pfvf.c to adf_gen4_hw_data.h
as they are specific to GEN4 and not just to qat_4xxx.
This change is made in anticipation of their use in live migration.
This does not introduce any functional change.
Signed-off-by: Xin Zeng <xin.zeng@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add and use the new helper function adf_get_etr_base() which retrieves
the virtual address of the ring bar.
This will be used extensively when adding support for Live Migration.
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Xin Zeng <xin.zeng@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
