IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
A new helper was introduced for RAS modules to be able to get the RAS
subsystem debugfs root directory. The helper is defined in debugfs.c
which is only built when CONFIG_DEBUG_FS=y.
However, it's possible that the modules would include debugfs support
for optional functionality. One current example is the fmpm module. In
this case, a build error will occur when CONFIG_RAS_FMPM is selected and
CONFIG_DEBUG_FS=n.
Add an inline helper function stub for the CONFIG_DEBUG_FS=n case as the
fmpm module can function without the debugfs functionality too.
Fixes: 9d2b6fa09d ("RAS: Export helper to get ras_debugfs_dir")
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218640
Reported-by: anthony s. knowles <akira.2020@protonmail.com>
Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Tested-by: anthony s. knowles <akira.2020@protonmail.com>
Link: https://lore.kernel.org/r/20240325183755.776-1-bp@alien8.de
Currently, the size of the locally cached FRU record structures is
based on the module parameter "max_nr_entries".
This creates issues when restoring records if a user changes the
parameter.
If the number of entries is reduced, then old, larger records will not
be restored. The opportunity to take action on the saved data is missed.
Also, new records will be created and written to storage, even as the old
records remain in storage, resulting in wasted space.
If the number of entries is increased, then the length of the old,
smaller records will not be adjusted. This causes a checksum failure
which leads to the old record being cleared from storage. Again this
results in another missed opportunity for action on the saved data.
Allocate the temporary record with the maximum possible size based on
the current maximum number of supported entries (255). This allows the
ERST read operation to succeed if max_nr_entries has been increased.
Warn the user if a saved record exceeds the expected size and fail to
load the module. This allows the user to adjust the module parameter
without losing data or the opportunity to restore larger records.
Increase the size of a saved record up to the current max_rec_len. The
checksum will be recalculated, and the updated record will be written to
storage.
Fixes: 6f15e617cc ("RAS: Introduce a FRU memory poison manager")
Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Tested-by: Muralidhara M K <muralidhara.mk@amd.com>
Link: https://lore.kernel.org/r/20240319113322.280096-3-yazen.ghannam@amd.com
An old, invalid record should be cleared and skipped.
Currently, the record is cleared in ERST, but it is not skipped. This
leads to a NULL pointer dereference when attempting to copy the old
record to the new record.
Continue the loop after clearing an old, invalid record to skip it.
Fixes: 6f15e617cc ("RAS: Introduce a FRU memory poison manager")
Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Tested-by: Muralidhara M K <muralidhara.mk@amd.com>
Link: https://lore.kernel.org/r/20240319113322.280096-2-yazen.ghannam@amd.com
collects and manages previously encountered hw errors in order to
save them to persistent storage across reboots. Previously recorded
errors are "replayed" upon reboot in order to poison memory which has
caused said errors in the past.
The main use case is stacked, on-chip memory which cannot simply be
replaced so poisoning faulty areas of it and thus making them
inaccessible is the only strategy to prolong its lifetime.
- Add an AMD address translation library glue which converts the
reported addresses of hw errors into system physical addresses in
order to be used by other subsystems like memory failure, for
example. Add support for MI300 accelerators to that library.
- igen6: Add support for Alder Lake-N SoC
- i10nm: Add Grand Ridge support
- The usual fixlets and cleanups
-----BEGIN PGP SIGNATURE-----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=FR2l
-----END PGP SIGNATURE-----
Merge tag 'edac_updates_for_v6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras
Pull EDAC updates from Borislav Petkov:
- Add a FRU (Field Replaceable Unit) memory poison manager which
collects and manages previously encountered hw errors in order to
save them to persistent storage across reboots. Previously recorded
errors are "replayed" upon reboot in order to poison memory which has
caused said errors in the past.
The main use case is stacked, on-chip memory which cannot simply be
replaced so poisoning faulty areas of it and thus making them
inaccessible is the only strategy to prolong its lifetime.
- Add an AMD address translation library glue which converts the
reported addresses of hw errors into system physical addresses in
order to be used by other subsystems like memory failure, for
example. Add support for MI300 accelerators to that library.
- igen6: Add support for Alder Lake-N SoC
- i10nm: Add Grand Ridge support
- The usual fixlets and cleanups
* tag 'edac_updates_for_v6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras:
EDAC/versal: Convert to platform remove callback returning void
RAS/AMD/FMPM: Fix off by one when unwinding on error
RAS/AMD/FMPM: Add debugfs interface to print record entries
RAS/AMD/FMPM: Save SPA values
RAS: Export helper to get ras_debugfs_dir
RAS/AMD/ATL: Fix bit overflow in denorm_addr_df4_np2()
RAS: Introduce a FRU memory poison manager
RAS/AMD/ATL: Add MI300 row retirement support
Documentation: Move RAS section to admin-guide
EDAC/versal: Make the bit position of injected errors configurable
EDAC/i10nm: Add Intel Grand Ridge micro-server support
EDAC/igen6: Add one more Intel Alder Lake-N SoC support
RAS/AMD/ATL: Add MI300 DRAM to normalized address translation support
RAS/AMD/ATL: Fix array overflow in get_logical_coh_st_fabric_id_mi300()
RAS/AMD/ATL: Add MI300 support
Documentation: RAS: Add index and address translation section
EDAC/amd64: Use new AMD Address Translation Library
RAS: Introduce AMD Address Translation Library
EDAC/synopsys: Convert to devm_platform_ioremap_resource()
Decrement the index variable i before the first iteration when freeing
the remaining elements on error. Depending on where this fails it could
free something from one element beyond the end of the fru_records[]
array.
[ bp: Massage commit message. ]
Fixes: 6f15e617cc ("RAS: Introduce a FRU memory poison manager")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/6fdec71a-846b-4cd0-af69-e5f6cd12f4f6@moroto.mountain
It is helpful to see the saved record entries during run time in
human-readable format. This is useful for testing during module
development. It can also be used by system admins to quickly and easily
see the state of the system.
Provide a sequential file in debugfs to print fields of interest from
the FRU records and their entries.
Don't fail to load the module if the debugfs interface is not available.
This is a convenience feature which does not affect other module
functionality.
The new interface reads the record entries and should hold the mutex.
Expand the mutex code comment to clarify when it should be held.
Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20240301143748.854090-4-yazen.ghannam@amd.com
The system physical address (SPA) of an error is not a stable value. It
will change depending on the location of the memory: parts can be
swapped. And it will change depending on memory topology: NUMA nodes
and/or interleaving can be adjusted.
Therefore, the SPA value is not part of the "FRU Memory Poison" record
format. And it will not be saved to persistent storage.
However, the SPA values can be helpful during debug and for system
admins during run time.
Save the SPA values in a separate structure. This is updated when
records are restored and when new errors are saved.
[ bp: Make error messages more user friendly and add and correct
comments. ]
Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20240301143748.854090-3-yazen.ghannam@amd.com
Export a getter instead of the debugfs node directly so that, other
in-tree-only RAS modules can use it.
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com>
Link: https://lore.kernel.org/r/20240301143748.854090-2-yazen.ghannam@amd.com
The hash_pa8 and hashed_bit values in denorm_addr_df4_np2() are
currently defined as u8 types. These variables represent single bits.
'hash_pa8' is set based on logical AND operations using masks with more
than 8 bits. So the calculated value will not fit in this variable. It
will always be '0'. The 'hash_pa8' check later in the function will fail
which produces incorrect results for some cases.
Change these variables to bool type. This clarifies that they are
single bit values. Also, this allows the compiler to ensure they hold
the proper results. Remove an unnecessary shift operation.
[ bp: Remove the unnecessary brackets in the else-branch of the
hash_pa8 assignment. ]
Fixes: 3f3174996b ("RAS: Introduce AMD Address Translation Library")
Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20240222165449.23582-1-yazen.ghannam@amd.com
Memory errors are an expected occurrence on systems with high memory
density. Generally, errors within a small number of unique physical
locations are acceptable, based on manufacturer and/or admin policy.
During run time, memory with errors may be retired so it is no longer
used by the system. This is done in mm through page poisoning, and the
effect will remain until the system is restarted.
If a memory location is consistently faulty, then the same run time
error handling may occur in the next reboot cycle, leading to
terminating jobs due to that already known bad memory. This could be
prevented if information from the previous boot was not lost.
Some add-in cards with driver-managed memory have on-board persistent
storage. Their driver saves memory error information to the persistent
storage during run time. The information is then restored after reset,
and known bad memory will be retired before the hardware is used.
A running log of bad memory locations is kept across multiple resets.
A similar solution is desirable for CPUs. However, this solution should
leverage industry-standard components as much as possible, rather than
a bespoke platform driver.
Two components are needed: a record format and a persistent storage
interface.
Implement a new module to manage the record formats on persistent
storage. Use the requirements for an AMD MI300-based system to start.
Vendor- and platform-specific details can be abstracted later as needed.
[ bp: Massage commit message and code, squash 30-ish more fixes from
Yazen and me. ]
Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com>
Co-developed-by: <naveenkrishna.chatradhi@amd.com>
Signed-off-by: <naveenkrishna.chatradhi@amd.com>
Co-developed-by: <muralidhara.mk@amd.com>
Signed-off-by: <muralidhara.mk@amd.com>
Tested-by: <sathyapriya.k@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20240214033516.1344948-3-yazen.ghannam@amd.com
DRAM row retirement depends on model-specific information that is best
done within the AMD Address Translation Library.
Export a generic wrapper function for other modules to use. Add any
model-specific helpers here.
Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20240214033516.1344948-2-yazen.ghannam@amd.com
Zen-based AMD systems report DRAM ECC errors through Unified Memory
Controller (UMC) MCA banks. The value provided in MCA_ADDR is
a "normalized" address which represents the UMC's view of its managed
memory. The normalized address must be translated to a system physical
address for software to take action.
MI300 systems, uniquely, do not provide a normalized address in MCA_ADDR
for DRAM ECC errors. Rather, the "DRAM" address is reported. This value
includes identifiers for the bank, row, column, pseudochannel and stack
of the memory location.
The DRAM address must be converted to a normalized address in order to
be further translated to a system physical address.
Add helper functions to do the DRAM to normalized translation for MI300
systems. The method is based on the fixed hardware layout of the on-chip
memory.
[ bp: Massage commit message, decapitalize some, rename function. ]
Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com>
Co-developed-by: Muralidhara M K <muralidhara.mk@amd.com>
Signed-off-by: Muralidhara M K <muralidhara.mk@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Tested-by: Muralidhara M K <muralidhara.mk@amd.com>
Link: https://lore.kernel.org/r/20240131165732.88297-1-yazen.ghannam@amd.com
Check against ARRAY_SIZE() which is the number of elements instead of
sizeof() which is the number of bytes.
Fixes: 453f0ae797 ("RAS/AMD/ATL: Add MI300 support")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/279c8b5e-6c00-467a-9071-9c67926abea4@moroto.mountain
AMD MI300 systems include on-die HBM3 memory and a unique topology. And
they fall under Data Fabric version 4.5 in overall design.
Generally, topology information (IDs, etc.) is gathered from Data Fabric
registers. However, the unique topology for MI300 means that some
topology information is fixed in hardware and follows arbitrary
mappings. Furthermore, not all hardware instances are software-visible,
so register accesses must be adjusted.
Recognize and add helper functions for the new MI300 interleave modes.
Add lookup tables for fixed values where appropriate. Adjust how Die and
Node IDs are found and used.
Also, fix some register bitmasks that were mislabeled.
Signed-off-by: Muralidhara M K <muralidhara.mk@amd.com>
Co-developed-by: Yazen Ghannam <yazen.ghannam@amd.com>
Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20240128155950.1434067-1-yazen.ghannam@amd.com
AMD Zen-based systems report memory errors through Machine Check banks
representing Unified Memory Controllers (UMCs). The address value
reported for DRAM ECC errors is a "normalized address" that is relative
to the UMC. This normalized address must be converted to a system
physical address to be usable by the OS.
Support for this address translation was introduced to the MCA subsystem
with Zen1 systems. The code was later moved to the AMD64 EDAC module,
since this was the only user of the code at the time.
However, there are uses for this translation outside of EDAC. The system
physical address can be used in MCA for preemptive page offlining as done
in some MCA notifier functions. Also, this translation is needed as the
basis of similar functionality needed for some CXL configurations on AMD
systems.
Introduce a common address translation library that can be used for
multiple subsystems including MCA, EDAC, and CXL.
Include support for UMC normalized to system physical address
translation for current CPU systems.
The Data Fabric Indirect register access offsets and one of the register
fields were changed. Default to the current offsets and register field
definition. And fallback to the older values if running on a "legacy"
system.
Provide built-in code to facilitate the loading and unloading of the
library module without affecting other modules or built-in code.
Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20240123041401.79812-2-yazen.ghannam@amd.com
Documentation/filesystems/seq_file.rst describes the possible return
values from a "show()" function used by single_open().
show_trace() returns the value of "trace_count". This could be
interpreted as "SEQ_SKIP", or just confuse the calling function.
Change to just return "0" to avoid confusing anyone reading this code
and possibly using as a template. Reading "daemon_active" was never
an intended use case.
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20221018165900.109029-1-tony.luck@intel.com
A large scale study of memory errors on Intel systems in data centers
showed that aggressively taking pages with corrected errors offline is
the best strategy of using corrected errors as a predictor of future
uncorrected errors.
Set the threshold to "2" on Intel systems. AMD guidance is that this is
not necessary for their systems.
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Yazen Ghannam <yazen.ghannam@amd.com>
Link: https://lore.kernel.org/r/20220607212015.175591-1-tony.luck@intel.com
Link: https://lore.kernel.org/r/YulOZ/Eso0bwUcC4@agluck-desk3.sc.intel.com
ce_add_elem() uses different return values to signal a result from
adding an element to the collector. Commit in Fixes: broke the case
where the element being added is not found in the array. Correct that.
[ bp: Rewrite commit message, add kernel-doc comments. ]
Fixes: de0e0624d8 ("RAS/CEC: Check count_threshold unconditionally")
Signed-off-by: William Roche <william.roche@oracle.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: <stable@vger.kernel.org>
Link: https://lkml.kernel.org/r/1617722939-29670-1-git-send-email-william.roche@oracle.com
late_initcall() expects a function that returns an integer. Update the
function signature to match.
[ bp: Massage commit message into proper sentences. ]
Fixes: 9554bfe403 ("x86/mce: Convert the CEC to use the MCE notifier")
Signed-off-by: Luca Stefani <luca.stefani.ge1@gmail.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Sami Tolvanen <samitolvanen@google.com>
Tested-by: Sami Tolvanen <samitolvanen@google.com>
Link: https://lkml.kernel.org/r/20200805095708.83939-1-luca.stefani.ge1@gmail.com
If the handler took any action to log or deal with the error, set a bit
in mce->kflags so that the default handler on the end of the machine
check chain can see what has been done.
Get rid of NOTIFY_STOP returns. Make the EDAC and dev-mcelog handlers
skip over errors already processed by CEC.
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Tested-by: Tony Luck <tony.luck@intel.com>
Link: https://lkml.kernel.org/r/20200214222720.13168-5-tony.luck@intel.com
The CEC code has its claws in a couple of routines in mce/core.c.
Convert it to just register itself on the normal MCE notifier chain.
[ bp: Make cec_add_elem() and cec_init() static. ]
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Tested-by: Tony Luck <tony.luck@intel.com>
Link: https://lkml.kernel.org/r/20200214222720.13168-3-tony.luck@intel.com
In addition, the 0day bot reported this build error:
>> drivers/ras/debugfs.c:10:5: error: redefinition of 'ras_userspace_consumers'
int ras_userspace_consumers(void)
^~~~~~~~~~~~~~~~~~~~~~~
In file included from drivers/ras/debugfs.c:3:0:
include/linux/ras.h:14:19: note: previous definition of 'ras_userspace_consumers' was here
static inline int ras_userspace_consumers(void) { return 0; }
^~~~~~~~~~~~~~~~~~~~~~~
for a riscv-specific .config where CONFIG_DEBUG_FS is not set. Fix all
that by making debugfs.o depend on that define.
[ bp: Rewrite commit message. ]
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Valdis Kletnieks <valdis.kletnieks@vt.edu>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: linux-edac@vger.kernel.org
Cc: x86@kernel.org
Link: http://lkml.kernel.org/r/7053.1565218556@turing-police
When building with C=2 and/or W=1, legitimate warnings are issued about
missing prototypes:
CHECK drivers/ras/debugfs.c
drivers/ras/debugfs.c:4:15: warning: symbol 'ras_debugfs_dir' was not declared. Should it be static?
drivers/ras/debugfs.c:8:5: warning: symbol 'ras_userspace_consumers' was not declared. Should it be static?
drivers/ras/debugfs.c:38:12: warning: symbol 'ras_add_daemon_trace' was not declared. Should it be static?
drivers/ras/debugfs.c:54:13: warning: symbol 'ras_debugfs_init' was not declared. Should it be static?
CC drivers/ras/debugfs.o
drivers/ras/debugfs.c:8:5: warning: no previous prototype for 'ras_userspace_consumers' [-Wmissing-prototypes]
8 | int ras_userspace_consumers(void)
| ^~~~~~~~~~~~~~~~~~~~~~~
drivers/ras/debugfs.c:38:12: warning: no previous prototype for 'ras_add_daemon_trace' [-Wmissing-prototypes]
38 | int __init ras_add_daemon_trace(void)
| ^~~~~~~~~~~~~~~~~~~~
drivers/ras/debugfs.c:54:13: warning: no previous prototype for 'ras_debugfs_init' [-Wmissing-prototypes]
54 | void __init ras_debugfs_init(void)
| ^~~~~~~~~~~~~~~~
Provide the proper includes.
[ bp: Take care of the same warnings for cec.c too. ]
Signed-off-by: Valdis Kletnieks <valdis.kletnieks@vt.edu>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: linux-edac@vger.kernel.org
Cc: x86@kernel.org
Link: http://lkml.kernel.org/r/7168.1565218769@turing-police
The pfn and array files in (debugfs)/ras/cec are intended for debugging
the CEC code itself. They are not needed on production systems, so the
default setting for this CONFIG option is "n".
[ bp: Have it with less ifdeffery by using IS_ENABLED(). ]
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
When dumping the array elements, print them in the following format:
[ PFN | generation in binary | count ]
to be perfectly clear what all those sections are.
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
... which is the better, more-fitting name anyway.
Tony:
- make action_threshold u64 due to debugfs accessors expecting u64.
- rename the remaining: s/count_threshold/action_threshold/g
Co-developed-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: linux-edac <linux-edac@vger.kernel.org>
Check the elements order in the array after every insertion.
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Free the array page if a failure is encountered while creating the
debugfs nodes.
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
When the value requested doesn't match the allowed (min,max) range,
the @data buffer should not be modified with the invalid value because
reading "decay_interval" shows it otherwise as if the previous write
succeeded.
Move the data write after the check.
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
The count_threshold should be checked unconditionally, after insertion
too, so that a count_threshold value of 1 can cause an immediate
offlining. I.e., offline the page on the *first* error encountered.
Add comments to make it clear what cec_add_elem() does, while at it.
Reported-by: WANG Chao <chao.wang@ucloud.cn>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: linux-edac@vger.kernel.org
Link: https://lkml.kernel.org/r/20190418034115.75954-3-chao.wang@ucloud.cn
When inserting random PFNs for debugging the CEC through
(debugfs)/ras/cec/pfn, depending on the return value of pfn_set(),
multiple values get inserted per a single write.
That is because simple_attr_write() interprets a retval of 0 as
success and claims the whole input. However, pfn_set() returns the
cec_add_elem() value, which, if > 0 and smaller than the whole input
length, makes glibc continue issuing the write syscall until there's
input left:
pfn_set
simple_attr_write
debugfs_attr_write
full_proxy_write
vfs_write
ksys_write
do_syscall_64
entry_SYSCALL_64_after_hwframe
leading to those repeated calls.
Return 0 to fix that.
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
cec_timer_fn() is a timer callback which reads ce_arr.array[] and
updates its decay values. However, it runs in interrupt context and the
mutex protection the CEC uses for that array, is inadequate. Convert the
used timer to a workqueue to keep the tasks the CEC performs preemptible
and thus low-prio.
[ bp: Rewrite commit message.
s/timer/decay/gi to make it agnostic as to what facility is used. ]
Fixes: 011d826111 ("RAS: Add a Corrected Errors Collector")
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Cc: <stable@vger.kernel.org>
Link: https://lkml.kernel.org/r/20190416213351.28999-2-xiyou.wangcong@gmail.com
Switch to using Donald Knuth's binary search algorithm (The Art of
Computer Programming, vol. 3, section 6.2.1). This should've been done
from the very beginning but the author must've been smoking something
very potent at the time.
The problem with the current one was that it would return the wrong
element index in certain situations:
https://lkml.kernel.org/r/CAM_iQpVd02zkVJ846cj-Fg1yUNuz6tY5q1Vpj4LrXmE06dPYYg@mail.gmail.com
and the noodling code after the loop was fishy at best.
So switch to using Knuth's binary search. The final result is much
cleaner and straightforward.
Fixes: 011d826111 ("RAS: Add a Corrected Errors Collector")
Reported-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Cc: <stable@vger.kernel.org>
Add SPDX license identifiers to all Make/Kconfig files which:
- Have no license information of any form
These files fall under the project license, GPL v2 only. The resulting SPDX
license identifier is:
GPL-2.0-only
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add SPDX license identifiers to all files which:
- Have no license information of any form
- Have EXPORT_.*_SYMBOL_GPL inside which was used in the
initial scan/conversion to ignore the file
These files fall under the project license, GPL v2 only. The resulting SPDX
license identifier is:
GPL-2.0-only
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Modify ->cec_entered in the critical section of the mutex.
Signed-off-by: WANG Chao <chao.wang@ucloud.cn>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Link: https://lkml.kernel.org/r/20190418034115.75954-2-chao.wang@ucloud.cn
The commit
297b64c743 ("ras: acpi / apei: generate trace event for unrecognized CPER section")
brought inconsistency in UUID types which are used across the RAS
subsystem.
Fix this by using guid_t everywhere.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com>
Cc: "Steven Rostedt (VMware)" <rostedt@goodmis.org>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Thomas Tai <thomas.tai@oracle.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Tyler Baicar <tbaicar@codeaurora.org>
Link: https://lkml.kernel.org/r/20190125143035.81589-1-andriy.shevchenko@linux.intel.com
The Kconfig lexer supports special characters such as '.' and '/' in
the parameter context. In my understanding, the reason is just to
support bare file paths in the source statement.
I do not see a good reason to complicate Kconfig for the room of
ambiguity.
The majority of code already surrounds file paths with double quotes,
and it makes sense since file paths are constant string literals.
Make it treewide consistent now.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Wolfram Sang <wsa@the-dreams.de>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Ingo Molnar <mingo@kernel.org>
Today 4 architectures set ARCH_SUPPORTS_MEMORY_FAILURE (arm64, parisc,
powerpc, and x86), while 4 other architectures set __ARCH_SI_TRAPNO
(alpha, metag, sparc, and tile). These two sets of architectures do
not interesect so remove the trapno paramater to remove confusion.
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Pull timer updates from Thomas Gleixner:
"Yet another big pile of changes:
- More year 2038 work from Arnd slowly reaching the point where we
need to think about the syscalls themself.
- A new timer function which allows to conditionally (re)arm a timer
only when it's either not running or the new expiry time is sooner
than the armed expiry time. This allows to use a single timer for
multiple timeout requirements w/o caring about the first expiry
time at the call site.
- A new NMI safe accessor to clock real time for the printk timestamp
work. Can be used by tracing, perf as well if required.
- A large number of timer setup conversions from Kees which got
collected here because either maintainers requested so or they
simply got ignored. As Kees pointed out already there are a few
trivial merge conflicts and some redundant commits which was
unavoidable due to the size of this conversion effort.
- Avoid a redundant iteration in the timer wheel softirq processing.
- Provide a mechanism to treat RTC implementations depending on their
hardware properties, i.e. don't inflict the write at the 0.5
seconds boundary which originates from the PC CMOS RTC to all RTCs.
No functional change as drivers need to be updated separately.
- The usual small updates to core code clocksource drivers. Nothing
really exciting"
* 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (111 commits)
timers: Add a function to start/reduce a timer
pstore: Use ktime_get_real_fast_ns() instead of __getnstimeofday()
timer: Prepare to change all DEFINE_TIMER() callbacks
netfilter: ipvs: Convert timers to use timer_setup()
scsi: qla2xxx: Convert timers to use timer_setup()
block/aoe: discover_timer: Convert timers to use timer_setup()
ide: Convert timers to use timer_setup()
drbd: Convert timers to use timer_setup()
mailbox: Convert timers to use timer_setup()
crypto: Convert timers to use timer_setup()
drivers/pcmcia: omap1: Fix error in automated timer conversion
ARM: footbridge: Fix typo in timer conversion
drivers/sgi-xp: Convert timers to use timer_setup()
drivers/pcmcia: Convert timers to use timer_setup()
drivers/memstick: Convert timers to use timer_setup()
drivers/macintosh: Convert timers to use timer_setup()
hwrng/xgene-rng: Convert timers to use timer_setup()
auxdisplay: Convert timers to use timer_setup()
sparc/led: Convert timers to use timer_setup()
mips: ip22/32: Convert timers to use timer_setup()
...
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In preparation for unconditionally passing the struct timer_list pointer to
all timer callbacks, switch to using the new timer_setup() and from_timer()
to pass the timer pointer explicitly.
Cc: Borislav Petkov <bp@suse.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Cc: Nicolas Iooss <nicolas.iooss_linux@m4x.org>
Cc: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Borislav Petkov <bp@suse.de>
parse_cec_param() compares a string with "cec_disable" using only 7
characters of the 11-character-long string.
The proper solution for this would be:
#define CEC_DISABLE "cec_disable"
strncmp(str, CEC_DISABLE, strlen(CEC_DISABLE))
but when comparing a string against a string constant strncmp() has no
advantage over strcmp() because the comparison is guaranteed to be bound by
the string constant. So just replace str strncmp() with strcmp().
[ tglx: Made it use strcmp and updated the changelog ]
Fixes: 011d826111 ("RAS: Add a Corrected Errors Collector")
Signed-off-by: Nicolas Iooss <nicolas.iooss_linux@m4x.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: http://lkml.kernel.org/r/20170903075440.30250-1-nicolas.iooss_linux@m4x.org
Currently there are trace events for the various RAS
errors with the exception of ARM processor type errors.
Add a new trace event for such errors so that the user
will know when they occur. These trace events are
consistent with the ARM processor error section type
defined in UEFI 2.6 spec section N.2.4.4.
Signed-off-by: Tyler Baicar <tbaicar@codeaurora.org>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Reviewed-by: Xie XiuQi <xiexiuqi@huawei.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
