IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
With some files moving into the cifs_common directory, we need
to add it to the CIFS entry in the MAINTAINERS file.
Suggested-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
My email address in exfat entry will be not available in a few days.
Update it to my own kernel.org address.
Link: https://lkml.kernel.org/r/20210825044833.16806-1-namjae.jeon@samsung.com
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The codes that shared between cifs and ksmbd will move into the cifs_common
directory. This patch add it to the ksmbd entry in the MAINTAINERS file.
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
My email address in ksmbd entry will be not available in a few days.
Update it to my own kernel.org address.
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Convert Samsung Exynos5422 SoC frequency and voltage scaling for
Dynamic Memory Controller to DT schema format using json-schema.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Acked-by: Lukasz Luba <lukasz.luba@arm.com>
Link: https://lore.kernel.org/r/20210820150353.161161-3-krzysztof.kozlowski@canonical.com
Signed-off-by: Rob Herring <robh@kernel.org>
First set of patches for v5.15. This got delayed as I have been mostly
offline for the last few weeks. The biggest change is removal of
prism54 driver, otherwise just smaller changes.
Major changes:
ath5k, ath9k, ath10k, ath11k:
* switch from 'pci_' to 'dma_' API
brcmfmac
* allow per-board firmware binaries
* add support 43752 SDIO device
prism54
* remove the obsoleted driver, everyone should be using p54 driver instead
-----BEGIN PGP SIGNATURE-----
iQFJBAABCgAzFiEEiBjanGPFTz4PRfLobhckVSbrbZsFAmEiEGcVHGt2YWxvQGNv
ZGVhdXJvcmEub3JnAAoJEG4XJFUm622b0UoH+wT2LyZ92PZUxL5FwUl1kFIRKefw
8H5urbnlioiqFjKU9YAwD3bvGTrIPMGjOkR50JxPNxxKzcx5CgHz6GQmIe16aSs2
FEMV//G5dcGe7HS94kdOiBhm6EqLrr+hrqWRop+uEnu9DuQNxnS/5ZpxU6zNSK7z
S2u2m/zpcaE6/F+Po1jlGyPRzUbTR8xV/3a7LKUgbZslbrGKayn+3aQwFXZ4D8YX
OhGrsL5nbFjKP0Ys7X/QS9s31IuzMBO5IUVMyJzcY7p6pPPFspxiGaT+HqUixZ9G
eb0hStxXANDAQbhBgz2KpIGH8J/0g8WdUwUj4SuiHOrhPSga6HZ06MhJ5xk=
=djwO
-----END PGP SIGNATURE-----
Merge tag 'wireless-drivers-next-2021-08-22' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next
Kalle Valo says:
====================
wireless-drivers-next patches for v5.15
First set of patches for v5.15. This got delayed as I have been mostly
offline for the last few weeks. The biggest change is removal of
prism54 driver, otherwise just smaller changes.
Major changes:
ath5k, ath9k, ath10k, ath11k:
* switch from 'pci_' to 'dma_' API
brcmfmac
* allow per-board firmware binaries
* add support 43752 SDIO device
prism54
* remove the obsoleted driver, everyone should be using p54 driver instead
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch adds a new driver for Virtio based GPIO devices.
This allows a guest VM running Linux to access GPIO lines provided by
the host. It supports all basic operations, except interrupts for the
GPIO lines.
Based on the initial work posted by:
"Enrico Weigelt, metux IT consult" <lkml@metux.net>.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Commit 104f942b2832 ("MIPS: Retire MACH_PISTACHIO") removes
./arch/mips/pistachio/ and ./arch/mips/configs/pistachio_defconfig, but
misses to adjust the corresponding section PISTACHIO SOC SUPPORT
in MAINTAINERS.
Hence, ./scripts/get_maintainer.pl --self-test=patterns complains:
warning: no file matches F: arch/mips/configs/pistachio*_defconfig
warning: no file matches F: arch/mips/pistachio/
As James Hartley is not reachable with the provided email address, the
remaining dtsi file, arch/mips/boot/dts/img/pistachio.dtsi, must be
maintained by its only user pistachio_marduk.dts, which is part of MARDUK
(CREATOR CI40) DEVICE TREE SUPPORT.
Add maintenance of pistachio.dtsi to that section and drop the PISTACHIO
SOC SUPPORT after its retirement.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Acked-by: Rahul Bedarkar <rahulbedarkar89@gmail.com>
Acked-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Move Intel WMI Thunderbolt driver to intel sub-directory
to improve readability.
Signed-off-by: Kate Hsuan <hpa@redhat.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20210820110458.73018-21-andriy.shevchenko@linux.intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Move Intel WMI Slim Bootloader FW update driver to intel sub-directory
to improve readability.
Signed-off-by: Kate Hsuan <hpa@redhat.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20210820110458.73018-20-andriy.shevchenko@linux.intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Move Intel vButton driver to intel sub-directory to improve readability.
Signed-off-by: Kate Hsuan <hpa@redhat.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20210820110458.73018-19-andriy.shevchenko@linux.intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Move Intel HID driver to intel sub-directory to improve readability.
Signed-off-by: Kate Hsuan <hpa@redhat.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20210820110458.73018-16-andriy.shevchenko@linux.intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Move Intel AtomISP v2 drivers to intel sub-directory
to improve readability.
Signed-off-by: Kate Hsuan <hpa@redhat.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20210820110458.73018-15-andriy.shevchenko@linux.intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Move Intel Speed Select interface driver to intel sub-directory to improve
readability and rename it from intel_speed_select_if to speed_select_if.
Signed-off-by: Kate Hsuan <hpa@redhat.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20210820110458.73018-14-andriy.shevchenko@linux.intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Move Intel Uncore frequency driver to intel sub-directory to improve
readability and rename it from intel-uncore-frequency.c to
uncore-frequency.c.
Signed-off-by: Kate Hsuan <hpa@redhat.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20210820110458.73018-13-andriy.shevchenko@linux.intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Move Intel telemetry driver to intel sub-directory to improve readability.
While at it, spell APL fully in the Kconfig.
Signed-off-by: Kate Hsuan <hpa@redhat.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Rajneesh Bhardwaj <irenic.rajneesh@gmail.com>
Link: https://lore.kernel.org/r/20210820110458.73018-9-andriy.shevchenko@linux.intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Move Intel PMC core driver to intel sub-directory to improve readability.
Signed-off-by: Kate Hsuan <hpa@redhat.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Rajneesh Bhardwaj <irenic.rajneesh@gmail.com>
Link: https://lore.kernel.org/r/20210820110458.73018-7-andriy.shevchenko@linux.intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Move Intel P-Unit IPC driver to intel sub-directory to improve readability.
Signed-off-by: Kate Hsuan <hpa@redhat.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20210820110458.73018-6-andriy.shevchenko@linux.intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Add driver for Intel Keem Bay SoC PCIe controller. This controller
is based on DesignWare PCIe core.
In Root Complex mode, only internal reference clock is possible for
Keem Bay A0. For Keem Bay B0, external reference clock can be used
and will be the default configuration. Currently, keembay_pcie_of_data
structure has one member. It will be expanded later to handle this
difference.
Endpoint mode link initialization is handled by the boot firmware.
Link: https://lore.kernel.org/r/20210805211010.29484-3-srikanth.thokala@intel.com
Signed-off-by: Wan Ahmad Zainie <wan.ahmad.zainie.wan.mohamad@intel.com>
Signed-off-by: Srikanth Thokala <srikanth.thokala@intel.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Krzysztof Wilczyński <kw@linux.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
- bump version strings, by Simon Wunderlich
- update docs about move IRC channel away from freenode,
by Sven Eckelmann
- Switch to kstrtox.h for kstrtou64, by Sven Eckelmann
- Update NULL checks, by Sven Eckelmann (2 patches)
- remove remaining skb-copy calls for broadcast packets,
by Linus Lüssing
-----BEGIN PGP SIGNATURE-----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=sHz+
-----END PGP SIGNATURE-----
Merge tag 'batadv-next-pullrequest-20210819' of git://git.open-mesh.org/linux-merge
Simon Wunderlich says:
====================
This cleanup patchset includes the following patches:
- bump version strings, by Simon Wunderlich
- update docs about move IRC channel away from freenode,
by Sven Eckelmann
- Switch to kstrtox.h for kstrtou64, by Sven Eckelmann
- Update NULL checks, by Sven Eckelmann (2 patches)
- remove remaining skb-copy calls for broadcast packets,
by Linus Lüssing
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Dynamic BIOS SAR driver exposing dynamic SAR information from BIOS
The Dynamic SAR (Specific Absorption Rate) driver uses ACPI DSM
(Device Specific Method) to communicate with BIOS and retrieve
dynamic SAR information and change notifications. The driver uses
sysfs to expose this data to userspace via read and notify.
Sysfs interface is documented in detail under:
Documentation/ABI/testing/sysfs-driver-intc_sar
Signed-off-by: Shravan S <s.shravan@intel.com>
Link: https://lore.kernel.org/r/20210723211452.27995-2-s.shravan@intel.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Add an I2C bus driver for virtio para-virtualization.
The controller can be emulated by the backend driver in
any device model software by following the virtio protocol.
The device specification can be found on
https://lists.oasis-open.org/archives/virtio-comment/202101/msg00008.html.
By following the specification, people may implement different
backend drivers to emulate different controllers according to
their needs.
Co-developed-by: Conghui Chen <conghui.chen@intel.com>
Signed-off-by: Conghui Chen <conghui.chen@intel.com>
Signed-off-by: Jie Deng <jie.deng@intel.com>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Tested-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Add Jim Quinlan, Nicolas Saenz Julienne, and Florian Fainelli as
maintainers of the Broadcom STB PCIe controller driver.
This driver is also included in these entries:
BROADCOM BCM2711/BCM2835 ARM ARCHITECTURE
BROADCOM BCM7XXX ARM ARCHITECTURE
which cover the Raspberry Pi specifics of the PCIe driver.
Link: https://lore.kernel.org/r/20210818225031.8502-1-jim2101024@gmail.com
Signed-off-by: Jim Quinlan <jim2101024@gmail.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Convert Broadcom DDR PHY Front End (DPFE) bindings to DT schema format
using json-schema.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Acked-by: Markus Mayer <mmayer@broadcom.com>
Link: https://lore.kernel.org/r/20210817080617.14503-1-krzysztof.kozlowski@canonical.com
Signed-off-by: Rob Herring <robh@kernel.org>
A small pull request to pick up a few new drivers and some cleanup
and fix patches.
New device support
* ad5110 non-volatile digital potentiometer
- New driver
* renesas rzl/gl2 12-bit / 8 channel ADC block
- New driver and bindings
Minor or late breaking fixes and cleanups
* ltc2983
- Fix a false assumption of initial interrupt during probe().
* hp03
- Use devm_* to simplify probe and allow the remove function to be dropped.
* rockchip_saradc
- Use a regulator notifier to reduce overheads of querying the scale.
-----BEGIN PGP SIGNATURE-----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=d/Fm
-----END PGP SIGNATURE-----
Merge tag 'iio-for-5.15b' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next
Jonathan writes:
2nd set of new IIO device support and cleanups for the 5.15 cycle.
A small pull request to pick up a few new drivers and some cleanup
and fix patches.
New device support
* ad5110 non-volatile digital potentiometer
- New driver
* renesas rzl/gl2 12-bit / 8 channel ADC block
- New driver and bindings
Minor or late breaking fixes and cleanups
* ltc2983
- Fix a false assumption of initial interrupt during probe().
* hp03
- Use devm_* to simplify probe and allow the remove function to be dropped.
* rockchip_saradc
- Use a regulator notifier to reduce overheads of querying the scale.
* tag 'iio-for-5.15b' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio:
iio: adc: Add driver for Renesas RZ/G2L A/D converter
dt-bindings: iio: adc: Add binding documentation for Renesas RZ/G2L A/D converter
iio: pressure: hp03: update device probe to register with devm functions
iio: adc: rockchip_saradc: add voltage notifier so get referenced voltage once at probe
iio: ltc2983: fix device probe
iio: potentiometer: Add driver support for AD5110
dt-bindings: iio: potentiometer: Add AD5110 in trivial-devices
Moved drivers/platform/x86/intel_menlow.c to drivers/thermal/intel.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Zhang Rui <rui.zhang@intel.com>
Link: https://lore.kernel.org/r/20210816035356.1955982-1-srinivas.pandruvada@linux.intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Add maintainer info for the OpenCompute PTP driver.
Signed-off-by: Jonathan Lemon <jonathan.lemon@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The "latency" tracers have some different requirements than normal
tracing, and also includes Daniel as a maintainer. Add a section in the
MAINTAINERS file to help direct patches and bug reports to these tracers
to the right people.
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Commit 8f00b3c41ae7 ("mfd: db8500-prcmu: Rename register header") renames
dbx500-prcmu-regs.h to db8500-prcmu-regs.h in drivers/mfd/ but misses
to adjust the ARM/NOMADIK/Ux500 ARCHITECTURES section in MAINTAINERS.
Hence, ./scripts/get_maintainer.pl --self-test=patterns complains:
warning: no file matches F: drivers/mfd/dbx500*
Remove the obsolete file entry after this file renaming.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Add ADC driver support for Renesas RZ/G2L A/D converter in SW
trigger mode.
A/D Converter block is a successive approximation analog-to-digital
converter with a 12-bit accuracy and supports a maximum of 8 input
channels.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20210804202118.25745-3-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Usual mix of cleanups and new device support.
Counter
======
Cleanups and refactoring:
* treewide
- Ensure attempts to set invalid modes result in -EINVAL return.
- Rename counter_count_function to counter_function as the middle count
is redundant.
- Standardize error returns when limits are exceeded.
* 104-quad:
- Document the lock.
- Return an error if attempt to set the ceiling value in a mode that
doesn't support it.
* intel-qep
- Drop unused bitops.h include
IIO
===
New device support
* bma255
- Add support fo the bosch,bmc156_accel which oddly only exposes the INT2
interrupt pin and not INT1. Patch set includes enabling use of INT2.
* ingenic_adc
- Add support for JZ4760 and similar and update bindings
- Add support for JZ4760B and update bindings
* rockchip_saradc
- Add support for rk3568 ADC (separate channel array as more channels)
* sgp40 gas sensor used to measure air quality
- New driver including binding and ABI documentation.
Bindings
--------
* Add missing bindings for many DACs where the binding was effectively
implicit due to fallback probe methods in I2C and SPI.
adi,ad5064
adi,ad5360
adi,ad5380
adi,ad5421
adi,ad5449
adi,ad5504
adi,ad5624r
adi,ad5686 / adi,ad5696
adi,ad5761
adi,ad5764
adi,ad5791
adi,ad8801
capella,cm3323 (also add explicit of_device_id table)
microchip,mcp4922
* bosch,bma255
- Interrupt type in example was opposite of what the device expects.
It's possible that a particular board had an inverter, but we
definitely don't want the example to suggest this would be normal.
- Add interrupt-names to allow for cases where only INT2 is connected.
- Sort compatibles
- Merge in very similar bosch,bma180 binding.
New feature
-----------
* Devices only allowed to provide either extended_name or a label for given
channel. If extend_name is used (generally discouraged but can't be
removed as it would be a userspaece ABI change), then the label sysfs
attribute will provide the extended_name. This allows some userspace
parser simplications and hardening.
* hid-sensors-pres
- Add a timestamp channel (either from hardware, or locally filled).
* vcnl3020
- Add periodic sensor mode used to provide IIO events.
Cleanups / minor fixes
----------------------
* core/buffers
- Avoid unnecessary zeroing of bitmaps that are immediately overwritten.
- Move a sanity check earlier to simplify error path.
* Quite a few cases of refactors to use devm_* for all of probe and drop
remove
- adjd_s311
- adxl345
- bma220
- da280
- dmard10
- ds311
- max5481
- max5821
- rfd77402
- tcs3414
- tmp006
* ad5624r
- Fix incorrect handling of a regulator that was preventing use of
internal regulators.
* adjd_s311
- Allocate a buffer as part of iio_priv() structure as maximum size
is small enough, no significant advantage in making it flexible sized.
* bma220
- Make handling of suspend and resume closer to the probe() wrt to the
rather odd interface, that suspend mode is entered by reading a register.
* ep93xx
- Prepare clock before using (part of conversion to CCF)
* fsl-imx25-gcq
- Use local device pointer.
- Adjust handling of platform_get_irq() to not check for 0 as an error.
The function is documented as never returning it.
* hid-sensors
- Use devm_kmemdup() consistently across all drivers to simplify channel
structure allocation management.
* meson-saradc
- Drop BL30 integration on G12A and newer SoCs as not used.
- Whitespace fixes.
* mpu6050
- Add per device type startup times. This avoids an issue with having
to dsicard initial data from gyroscopes when they were still stabilizing.
* rfd77402
- Change from passing private data, to passing i2c_client where only
that is needed, reducing back and forth in pm functions.
* si1145
- Drop pointless continue
* st-sensors
- Cleanup of includes to remove unused and add missing headers that are used.
- Use some devm functions to simplify probe() and remove() - gets us part way
towards a fully device managed driver.
* sx9310
- Switch from of to generic properties to enable ACPI bindings.
* vcnl3020
- Add DMA safe buffer for bulk transfers.
- Drop use of iio_claim_direct() in a driver that has no mode changes.
A local lock is more appropriate.
-----BEGIN PGP SIGNATURE-----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=cDKa
-----END PGP SIGNATURE-----
Merge tag 'iio-for-5.15a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next
Jonathan writes:
First set of new IIO and counter device support, cleanups and features for 5.15
Usual mix of cleanups and new device support.
Counter
======
Cleanups and refactoring:
* treewide
- Ensure attempts to set invalid modes result in -EINVAL return.
- Rename counter_count_function to counter_function as the middle count
is redundant.
- Standardize error returns when limits are exceeded.
* 104-quad:
- Document the lock.
- Return an error if attempt to set the ceiling value in a mode that
doesn't support it.
* intel-qep
- Drop unused bitops.h include
IIO
===
New device support
* bma255
- Add support fo the bosch,bmc156_accel which oddly only exposes the INT2
interrupt pin and not INT1. Patch set includes enabling use of INT2.
* ingenic_adc
- Add support for JZ4760 and similar and update bindings
- Add support for JZ4760B and update bindings
* rockchip_saradc
- Add support for rk3568 ADC (separate channel array as more channels)
* sgp40 gas sensor used to measure air quality
- New driver including binding and ABI documentation.
Bindings
--------
* Add missing bindings for many DACs where the binding was effectively
implicit due to fallback probe methods in I2C and SPI.
adi,ad5064
adi,ad5360
adi,ad5380
adi,ad5421
adi,ad5449
adi,ad5504
adi,ad5624r
adi,ad5686 / adi,ad5696
adi,ad5761
adi,ad5764
adi,ad5791
adi,ad8801
capella,cm3323 (also add explicit of_device_id table)
microchip,mcp4922
* bosch,bma255
- Interrupt type in example was opposite of what the device expects.
It's possible that a particular board had an inverter, but we
definitely don't want the example to suggest this would be normal.
- Add interrupt-names to allow for cases where only INT2 is connected.
- Sort compatibles
- Merge in very similar bosch,bma180 binding.
New feature
-----------
* Devices only allowed to provide either extended_name or a label for given
channel. If extend_name is used (generally discouraged but can't be
removed as it would be a userspaece ABI change), then the label sysfs
attribute will provide the extended_name. This allows some userspace
parser simplications and hardening.
* hid-sensors-pres
- Add a timestamp channel (either from hardware, or locally filled).
* vcnl3020
- Add periodic sensor mode used to provide IIO events.
Cleanups / minor fixes
----------------------
* core/buffers
- Avoid unnecessary zeroing of bitmaps that are immediately overwritten.
- Move a sanity check earlier to simplify error path.
* Quite a few cases of refactors to use devm_* for all of probe and drop
remove
- adjd_s311
- adxl345
- bma220
- da280
- dmard10
- ds311
- max5481
- max5821
- rfd77402
- tcs3414
- tmp006
* ad5624r
- Fix incorrect handling of a regulator that was preventing use of
internal regulators.
* adjd_s311
- Allocate a buffer as part of iio_priv() structure as maximum size
is small enough, no significant advantage in making it flexible sized.
* bma220
- Make handling of suspend and resume closer to the probe() wrt to the
rather odd interface, that suspend mode is entered by reading a register.
* ep93xx
- Prepare clock before using (part of conversion to CCF)
* fsl-imx25-gcq
- Use local device pointer.
- Adjust handling of platform_get_irq() to not check for 0 as an error.
The function is documented as never returning it.
* hid-sensors
- Use devm_kmemdup() consistently across all drivers to simplify channel
structure allocation management.
* meson-saradc
- Drop BL30 integration on G12A and newer SoCs as not used.
- Whitespace fixes.
* mpu6050
- Add per device type startup times. This avoids an issue with having
to dsicard initial data from gyroscopes when they were still stabilizing.
* rfd77402
- Change from passing private data, to passing i2c_client where only
that is needed, reducing back and forth in pm functions.
* si1145
- Drop pointless continue
* st-sensors
- Cleanup of includes to remove unused and add missing headers that are used.
- Use some devm functions to simplify probe() and remove() - gets us part way
towards a fully device managed driver.
* sx9310
- Switch from of to generic properties to enable ACPI bindings.
* vcnl3020
- Add DMA safe buffer for bulk transfers.
- Drop use of iio_claim_direct() in a driver that has no mode changes.
A local lock is more appropriate.
* tag 'iio-for-5.15a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (77 commits)
counter: 104-quad-8: Describe member 'lock' in 'quad8'
iio: hid-sensor-press: Add timestamp channel
counter: Rename counter_count_function to counter_function
counter: Rename counter_signal_value to counter_signal_level
counter: Standardize to ERANGE for limit exceeded errors
counter: Return error code on invalid modes
counter: 104-quad-8: Return error when invalid mode during ceiling_write
iio: accel: bmc150: Add support for BMC156
iio: accel: bmc150: Make it possible to configure INT2 instead of INT1
dt-bindings: iio: accel: bma255: Add bosch,bmc156_accel
dt-bindings: iio: accel: bma255: Add interrupt-names
iio: light: cm3323: Add of_device_id table
dt-bindings: Add bindings for Capella cm3323 Ambient Light Sensor
iio: chemical: Add driver support for sgp40
dt-bindings: iio: chemical: Add trivial DT binding for sgp40
iio: ep93xx: Prepare clock before using it
iio: adc: fsl-imx25-gcq: adjust irq check to match docs and simplify code
iio: dac: max5821: convert device register to device managed function
dt-bindings: iio/adc: ingenic: add the JZ4760(B) socs to the sadc Documentation
iio/adc: ingenic: add JZ4760B support to the sadc driver
...
Lightnvm supports the OCSSD 1.x and 2.0 specs which were early attempts
to produce Open Channel SSDs and never made it into the NVMe spec
proper. They have since been superceeded by NVMe enhancements such
as ZNS support. Remove the support per the deprecation schedule.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20210812132308.38486-1-hch@lst.de
Reviewed-by: Matias Bjørling <mb@lightnvm.io>
Reviewed-by: Javier González <javier@javigon.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
commit <47595e32869f> ("<MAINTAINERS: Mark some staging directories>")
indicated the ipx network layer as obsolete in Jan 2018,
updated in the MAINTAINERS file.
now, after being exposed for 3 years to refactoring, so to
remove the ipx network layer info from MAINTAINERS.
additionally, there is no module that depends on ipx.h
except a broken staging driver(r8188eu)
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Patches related to the tmon which is in tools/thermal are floating around
since years because it is unclear who takes care of it.
Add the missing userspace tools directory related to thermal to fix the
situation.
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
can and ieee802154.
Current release - regressions:
- r8169: fix ASPM-related link-up regressions
- bridge: fix flags interpretation for extern learn fdb entries
- phy: micrel: fix link detection on ksz87xx switch
- Revert "tipc: Return the correct errno code"
- ptp: fix possible memory leak caused by invalid cast
Current release - new code bugs:
- bpf: add missing bpf_read_[un]lock_trace() for syscall program
- bpf: fix potentially incorrect results with bpf_get_local_storage()
- page_pool: mask the page->signature before the checking, avoid
dma mapping leaks
- netfilter: nfnetlink_hook: 5 fixes to information in netlink dumps
- bnxt_en: fix firmware interface issues with PTP
- mlx5: Bridge, fix ageing time
Previous releases - regressions:
- linkwatch: fix failure to restore device state across suspend/resume
- bareudp: fix invalid read beyond skb's linear data
Previous releases - always broken:
- bpf: fix integer overflow involving bucket_size
- ppp: fix issues when desired interface name is specified via netlink
- wwan: mhi_wwan_ctrl: fix possible deadlock
- dsa: microchip: ksz8795: fix number of VLAN related bugs
- dsa: drivers: fix broken backpressure in .port_fdb_dump
- dsa: qca: ar9331: make proper initial port defaults
Misc:
- bpf: add lockdown check for probe_write_user helper
- netfilter: conntrack: remove offload_pickup sysctl before 5.14 is out
- netfilter: conntrack: collect all entries in one cycle,
heuristically slow down garbage collection scans
on idle systems to prevent frequent wake ups
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEE6jPA+I1ugmIBA4hXMUZtbf5SIrsFAmEVb/AACgkQMUZtbf5S
Irvlzw//XGDHNNPPOueHVhYK50+WiqPMxezQ5nbnG6uR6JtPyirMNTgzST8rQRsu
HmQy8/Oi6bK5rbPC9iDtKK28ba6Ldvu1ic8lTkuWyNNthG/pZGJJQ+Pg7dmkd7te
soJGZKnTbNWwbgGOFbfw9rLRuzWsjQjQ43vxTMjjNnpOwNxANuNR1GN0S/t8e9di
9BBT8jtgcHhtW5jRMHMNWHk+k8aeyIZPxjl9fjzzsMt7meX50DFrCJgf8bKkZ5dA
W2b/fzUyMqVQJpgmIY4ktFmR4mV382pWOOs6rl+ppSu+mU/gpTuYCofF7FqAUU5S
71mzukW6KdOrqymVuwiTXBlGnZB370aT7aUU5PHL/ZkDJ9shSyVRcg/iQa40myzn
5wxunZX936z5f84bxZPW1J5bBZklba8deKPXHUkl5RoIXsN2qWFPJpZ1M0eHyfPm
ZdqvRZ1IkSSFZFr6FF374bEqa88NK1wbVKUbGQ+yn8abE+HQfXQR9ZWZa1DR1wkb
rF8XWOHjQLp/zlTRnj3gj3T4pEwc5L1QOt7RUrYfI36Mh7iUz5EdzowaiEaDQT6/
neThilci1F6Mz4Uf65pK4TaDTDvj1tqqAdg3g8uneHBTFARS+htGXqkaKxP6kSi+
T/W4woOqCRT6c0+BhZ2jPRhKsMZ5kR1vKLUVBHShChq32mDpn6g=
=hzDl
-----END PGP SIGNATURE-----
Merge tag 'net-5.14-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Networking fixes, including fixes from netfilter, bpf, can and
ieee802154.
The size of this is pretty normal, but we got more fixes for 5.14
changes this week than last week. Nothing major but the trend is the
opposite of what we like. We'll see how the next week goes..
Current release - regressions:
- r8169: fix ASPM-related link-up regressions
- bridge: fix flags interpretation for extern learn fdb entries
- phy: micrel: fix link detection on ksz87xx switch
- Revert "tipc: Return the correct errno code"
- ptp: fix possible memory leak caused by invalid cast
Current release - new code bugs:
- bpf: add missing bpf_read_[un]lock_trace() for syscall program
- bpf: fix potentially incorrect results with bpf_get_local_storage()
- page_pool: mask the page->signature before the checking, avoid dma
mapping leaks
- netfilter: nfnetlink_hook: 5 fixes to information in netlink dumps
- bnxt_en: fix firmware interface issues with PTP
- mlx5: Bridge, fix ageing time
Previous releases - regressions:
- linkwatch: fix failure to restore device state across
suspend/resume
- bareudp: fix invalid read beyond skb's linear data
Previous releases - always broken:
- bpf: fix integer overflow involving bucket_size
- ppp: fix issues when desired interface name is specified via
netlink
- wwan: mhi_wwan_ctrl: fix possible deadlock
- dsa: microchip: ksz8795: fix number of VLAN related bugs
- dsa: drivers: fix broken backpressure in .port_fdb_dump
- dsa: qca: ar9331: make proper initial port defaults
Misc:
- bpf: add lockdown check for probe_write_user helper
- netfilter: conntrack: remove offload_pickup sysctl before 5.14 is
out
- netfilter: conntrack: collect all entries in one cycle,
heuristically slow down garbage collection scans on idle systems to
prevent frequent wake ups"
* tag 'net-5.14-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (87 commits)
vsock/virtio: avoid potential deadlock when vsock device remove
wwan: core: Avoid returning NULL from wwan_create_dev()
net: dsa: sja1105: unregister the MDIO buses during teardown
Revert "tipc: Return the correct errno code"
net: mscc: Fix non-GPL export of regmap APIs
net: igmp: increase size of mr_ifc_count
MAINTAINERS: switch to my OMP email for Renesas Ethernet drivers
tcp_bbr: fix u32 wrap bug in round logic if bbr_init() called after 2B packets
net: pcs: xpcs: fix error handling on failed to allocate memory
net: linkwatch: fix failure to restore device state across suspend/resume
net: bridge: fix memleak in br_add_if()
net: switchdev: zero-initialize struct switchdev_notifier_fdb_info emitted by drivers towards the bridge
net: bridge: fix flags interpretation for extern learn fdb entries
net: dsa: sja1105: fix broken backpressure in .port_fdb_dump
net: dsa: lantiq: fix broken backpressure in .port_fdb_dump
net: dsa: lan9303: fix broken backpressure in .port_fdb_dump
net: dsa: hellcreek: fix broken backpressure in .port_fdb_dump
bpf, core: Fix kernel-doc notation
net: igmp: fix data-race in igmp_ifc_timer_expire()
net: Fix memory leak in ieee802154_raw_deliver
...
The bulk of the addition this time is mainly refactoring to add support
for Virtio transport for SCMI and the addition of the support itself.
The refactoring includes allowing transport specific init/exit calls,
making each transport as compile time configurable, supporting
monotonically increasing tokens instead of using the next available
free buffer index as the token for scmi messages which eases handling
concurrent and out-of-order messages which is a must have for virtio
transport.
Virtio support itself is conformant to the virtio SCMI device spec [1].
Virtio device id 32 has been reserved for the SCMI device [2].
Other than the virtio support, there is one bug fix in the probe failure
clean up path.
[1] https://github.com/oasis-tcs/virtio-spec/blob/master/virtio-scmi.tex
[2] https://www.oasis-open.org/committees/ballot.php?id=3496
-----BEGIN PGP SIGNATURE-----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=CR6R
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=H7PM
-----END PGP SIGNATURE-----
Merge tag 'scmi-updates-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into arm/drivers
SCMI Updates for v5.15
The bulk of the addition this time is mainly refactoring to add support
for Virtio transport for SCMI and the addition of the support itself.
The refactoring includes allowing transport specific init/exit calls,
making each transport as compile time configurable, supporting
monotonically increasing tokens instead of using the next available
free buffer index as the token for scmi messages which eases handling
concurrent and out-of-order messages which is a must have for virtio
transport.
Virtio support itself is conformant to the virtio SCMI device spec [1].
Virtio device id 32 has been reserved for the SCMI device [2].
Other than the virtio support, there is one bug fix in the probe failure
clean up path.
[1] https://github.com/oasis-tcs/virtio-spec/blob/master/virtio-scmi.tex
[2] https://www.oasis-open.org/committees/ballot.php?id=3496
* tag 'scmi-updates-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
firmware: arm_scmi: Use WARN_ON() to check configured transports
firmware: arm_scmi: Fix boolconv.cocci warnings
firmware: arm_scmi: Free mailbox channels if probe fails
firmware: arm_scmi: Add virtio transport
firmware: arm_scmi: Add priv parameter to scmi_rx_callback
dt-bindings: arm: Add virtio transport for SCMI
firmware: arm_scmi: Add optional link_supplier() transport op
firmware: arm_scmi: Add message passing abstractions for transports
firmware: arm_scmi: Add method to override max message number
firmware: arm_scmi: Make shmem support optional for transports
firmware: arm_scmi: Make SCMI transports configurable
firmware: arm_scmi: Make polling mode optional
firmware: arm_scmi: Make .clear_channel optional
firmware: arm_scmi: Handle concurrent and out-of-order messages
firmware: arm_scmi: Introduce monotonically increasing tokens
firmware: arm_scmi: Add optional transport_init/exit support
firmware: arm_scmi: Remove scmi_dump_header_dbg() helper
firmware: arm_scmi: Add support for type handling in common functions
Link: https://lore.kernel.org/r/20210811075743.707961-1-sudeep.holla@arm.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
