IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
A rare BUG_ON triggered in assoc_array_gc:
[3430308.818153] kernel BUG at lib/assoc_array.c:1609!
Which corresponded to the statement currently at line 1593 upstream:
BUG_ON(assoc_array_ptr_is_meta(p));
Using the data from the core dump, I was able to generate a userspace
reproducer[1] and determine the cause of the bug.
[1]: https://github.com/brenns10/kernel_stuff/tree/master/assoc_array_gc
After running the iterator on the entire branch, an internal tree node
looked like the following:
NODE (nr_leaves_on_branch: 3)
SLOT [0] NODE (2 leaves)
SLOT [1] NODE (1 leaf)
SLOT [2..f] NODE (empty)
In the userspace reproducer, the pr_devel output when compressing this
node was:
-- compress node 0x5607cc089380 --
free=0, leaves=0
[0] retain node 2/1 [nx 0]
[1] fold node 1/1 [nx 0]
[2] fold node 0/1 [nx 2]
[3] fold node 0/2 [nx 2]
[4] fold node 0/3 [nx 2]
[5] fold node 0/4 [nx 2]
[6] fold node 0/5 [nx 2]
[7] fold node 0/6 [nx 2]
[8] fold node 0/7 [nx 2]
[9] fold node 0/8 [nx 2]
[10] fold node 0/9 [nx 2]
[11] fold node 0/10 [nx 2]
[12] fold node 0/11 [nx 2]
[13] fold node 0/12 [nx 2]
[14] fold node 0/13 [nx 2]
[15] fold node 0/14 [nx 2]
after: 3
At slot 0, an internal node with 2 leaves could not be folded into the
node, because there was only one available slot (slot 0). Thus, the
internal node was retained. At slot 1, the node had one leaf, and was
able to be folded in successfully. The remaining nodes had no leaves,
and so were removed. By the end of the compression stage, there were 14
free slots, and only 3 leaf nodes. The tree was ascended and then its
parent node was compressed. When this node was seen, it could not be
folded, due to the internal node it contained.
The invariant for compression in this function is: whenever
nr_leaves_on_branch < ASSOC_ARRAY_FAN_OUT, the node should contain all
leaf nodes. The compression step currently cannot guarantee this, given
the corner case shown above.
To fix this issue, retry compression whenever we have retained a node,
and yet nr_leaves_on_branch < ASSOC_ARRAY_FAN_OUT. This second
compression will then allow the node in slot 1 to be folded in,
satisfying the invariant. Below is the output of the reproducer once the
fix is applied:
-- compress node 0x560e9c562380 --
free=0, leaves=0
[0] retain node 2/1 [nx 0]
[1] fold node 1/1 [nx 0]
[2] fold node 0/1 [nx 2]
[3] fold node 0/2 [nx 2]
[4] fold node 0/3 [nx 2]
[5] fold node 0/4 [nx 2]
[6] fold node 0/5 [nx 2]
[7] fold node 0/6 [nx 2]
[8] fold node 0/7 [nx 2]
[9] fold node 0/8 [nx 2]
[10] fold node 0/9 [nx 2]
[11] fold node 0/10 [nx 2]
[12] fold node 0/11 [nx 2]
[13] fold node 0/12 [nx 2]
[14] fold node 0/13 [nx 2]
[15] fold node 0/14 [nx 2]
internal nodes remain despite enough space, retrying
-- compress node 0x560e9c562380 --
free=14, leaves=1
[0] fold node 2/15 [nx 0]
after: 3
Changes
=======
DH:
- Use false instead of 0.
- Reorder the inserted lines in a couple of places to put retained before
next_slot.
ver #2)
- Fix typo in pr_devel, correct comparison to "<="
Fixes: 3cb989501c26 ("Add a generic associative array implementation.")
Cc: <stable@vger.kernel.org>
Signed-off-by: Stephen Brennan <stephen.s.brennan@oracle.com>
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Andrew Morton <akpm@linux-foundation.org>
cc: keyrings@vger.kernel.org
Link: https://lore.kernel.org/r/20220511225517.407935-1-stephen.s.brennan@oracle.com/ # v1
Link: https://lore.kernel.org/r/20220512215045.489140-1-stephen.s.brennan@oracle.com/ # v2
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEGhZs6bAKwk/OTgTpSD+KveBX+j4FAmKWfVcACgkQSD+KveBX
+j6WkQf/eKOHaSaD/h3JkUp1qFpFFxjdidnUJKVg/N4N5EhiiF5k2FZm5o0l3Nv9
rR5emN/iMpeAtSEMoQcecKvjeCppFMFfuKWh8GoimQpbsApOwDvOAsk01p78FVOA
ZK2DeWFdBT9P3d/NOiwgHujkYVHF0OuSMfnf5Iww3GubE5/1PfPZ4QTUyFRjM/D7
Ir6GXi9psIBIERzAVTIRpnzTPjGzkKURgcyr5N7mpxMWbgjB4nKs//O0emfc/mG6
i46OQNSU/mLWT7K8kXP2kyq6s1/DCXc+s7UbChEXp/v/N0yZeeelYrkhkZUsbGtr
DA2mK2tikGGSGwtHpI8yYbs+N1LoIw==
=msRz
-----END PGP SIGNATURE-----
Merge tag 'mlx5-fixes-2022-05-31' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux
Saeed Mahameed says:
====================
mlx5 fixes 2022-05-31
This series provides bug fixes to mlx5 driver.
Please pull and let me know if there is any problem.
* tag 'mlx5-fixes-2022-05-31' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux:
net/mlx5: Fix mlx5_get_next_dev() peer device matching
net/mlx5e: Update netdev features after changing XDP state
net/mlx5: correct ECE offset in query qp output
net/mlx5e: Disable softirq in mlx5e_activate_rq to avoid race condition
net/mlx5: CT: Fix header-rewrite re-use for tupels
net/mlx5e: TC NIC mode, fix tc chains miss table
net/mlx5: Don't use already freed action pointer
====================
Link: https://lore.kernel.org/r/20220531205447.99236-1-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Íñigo Huguet says:
====================
sfc/siena: fix some efx_separate_tx_channels errors
Trying to load sfc driver with modparam efx_separate_tx_channels=1
resulted in errors during initialization and not being able to use the
NIC. This patches fix a few bugs and make it work again.
This has been already done for sfc, do it also for sfc_siena.
====================
Link: https://lore.kernel.org/r/20220601063603.15362-1-ihuguet@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
tx_channel_offset is calculated in efx_allocate_msix_channels, but it is
also calculated again in efx_set_channels because it was originally done
there, and when efx_allocate_msix_channels was introduced it was
forgotten to be removed from efx_set_channels.
Moreover, the old calculation is wrong when using
efx_separate_tx_channels because now we can have XDP channels after the
TX channels, so n_channels - n_tx_channels doesn't point to the first TX
channel.
Remove the old calculation from efx_set_channels, and add the
initialization of this variable if MSI or legacy interrupts are used,
next to the initialization of the rest of the related variables, where
it was missing.
This has been already done for sfc, do it also for sfc_siena.
Fixes: 3990a8fffbda ("sfc: allocate channels for XDP tx queues")
Reported-by: Tianhao Zhao <tizhao@redhat.com>
Signed-off-by: Íñigo Huguet <ihuguet@redhat.com>
Acked-by: Martin Habets <habetsm.xilinx@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Normally, all channels have RX and TX queues, but this is not true if
modparam efx_separate_tx_channels=1 is used. In that cases, some
channels only have RX queues and others only TX queues (or more
preciselly, they have them allocated, but not initialized).
Fix efx_channel_has_tx_queues to return the correct value for this case
too.
This has been already done for sfc, do it also for sfc_siena.
Messages shown at probe time before the fix:
sfc 0000:03:00.0 ens6f0np0: MC command 0x82 inlen 544 failed rc=-22 (raw=0) arg=0
------------[ cut here ]------------
netdevice: ens6f0np0: failed to initialise TXQ -1
WARNING: CPU: 1 PID: 626 at drivers/net/ethernet/sfc/ef10.c:2393 efx_ef10_tx_init+0x201/0x300 [sfc]
[...] stripped
RIP: 0010:efx_ef10_tx_init+0x201/0x300 [sfc]
[...] stripped
Call Trace:
efx_init_tx_queue+0xaa/0xf0 [sfc]
efx_start_channels+0x49/0x120 [sfc]
efx_start_all+0x1f8/0x430 [sfc]
efx_net_open+0x5a/0xe0 [sfc]
__dev_open+0xd0/0x190
__dev_change_flags+0x1b3/0x220
dev_change_flags+0x21/0x60
[...] stripped
Messages shown at remove time before the fix:
sfc 0000:03:00.0 ens6f0np0: failed to flush 10 queues
sfc 0000:03:00.0 ens6f0np0: failed to flush queues
Fixes: 8700aff08984 ("sfc: fix channel allocation with brute force")
Reported-by: Tianhao Zhao <tizhao@redhat.com>
Signed-off-by: Martin Habets <habetsm.xilinx@gmail.com>
Tested-by: Íñigo Huguet <ihuguet@redhat.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Steffen Klassert says:
====================
ipsec 2022-06-01
1) Revert "net: af_key: add check for pfkey_broadcast in function pfkey_process"
From Michal Kubecek.
2) Don't set IPv4 DF bit when encapsulating IPv6 frames below 1280 bytes.
From Maciej Żenczykowski.
* 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec:
xfrm: do not set IPv4 DF flag when encapsulating IPv6 frames <= 1280 bytes.
Revert "net: af_key: add check for pfkey_broadcast in function pfkey_process"
====================
Link: https://lore.kernel.org/r/20220601103349.2297361-1-steffen.klassert@secunet.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
First set of fixes for v5.19. Build fixes for iwlwifi and libertas, a
scheduling while atomic fix for rtw88 and use-after-free fix for
mac80211.
-----BEGIN PGP SIGNATURE-----
iQFFBAABCgAvFiEEiBjanGPFTz4PRfLobhckVSbrbZsFAmKXSCgRHGt2YWxvQGtl
cm5lbC5vcmcACgkQbhckVSbrbZvWpAf9G7EudAQVOCfP4ogJ89m60U5S3ui4HbSG
5hyTwxUnzdrngYmykSEOsChX4inhZOPGiGBD1652sy82NQpD6e8lxRsBQUQeb8lm
RTn4PBY9sWVJo7Qe1oLXLv6yKApAdiUlVtWJNZDjotOZUxd7KubCQWcTz4lNQ/Mu
AG5zvWuCDP+McY9r6rqwhI3+ql/gsewbcONHd9nZufQMydDtxE39lk5GKFvPJgg2
F6sAYPP/O243nVDUOmg73NrnlU+2tWwamCUp8v4dSlQpfXRd+G65k5AKruz5AXmJ
zQ9rQkCe1aCvyPOtRa6Q2uAsi553NaCDudHHRgxV8+qP7phXWOpV/g==
=Cly8
-----END PGP SIGNATURE-----
Merge tag 'wireless-2022-06-01' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless
Kalle Valo says:
====================
wireless fixes for v5.19
First set of fixes for v5.19. Build fixes for iwlwifi and libertas, a
scheduling while atomic fix for rtw88 and use-after-free fix for
mac80211.
* tag 'wireless-2022-06-01' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless:
wifi: mac80211: fix use-after-free in chanctx code
wifi: rtw88: add a work to correct atomic scheduling warning of ::set_tim
wifi: iwlwifi: pcie: rename CAUSE macro
wifi: libertas: use variable-size data in assoc req/resp cmd
====================
Link: https://lore.kernel.org/r/20220601110741.90B28C385A5@smtp.kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This update includes:
- fix refcount leak in xfs_ifree()
- fix xfs_buf_cancel structure leaks in log recovery
- fix dquot leak after failed quota check
- fix a couple of problematic ASSERTS
- fix small aim7 perf regression in from new btree sibling
validation
- clean up log incompat feature marking for new logged attribute
feature
- disallow logged attributes on legacy V4 filesystem formats.
- fix da state leak when freeing attr intents
- improve validation of the attr log items in recovery
- use slab caches for commonly used attr structures
- fix leaks of attr name/value buffer and reduce copying overhead
during intent logging
- remove some dead debug code from log recovery
-----BEGIN PGP SIGNATURE-----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=OLD4
-----END PGP SIGNATURE-----
Merge tag 'xfs-5.19-for-linus-2' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull more xfs updates from Dave Chinner:
"This update is largely bug fixes and cleanups for all the code merged
in the first pull request. The majority of them are to the new logged
attribute code, but there are also a couple of fixes for other log
recovery and memory leaks that have recently been found.
Summary:
- fix refcount leak in xfs_ifree()
- fix xfs_buf_cancel structure leaks in log recovery
- fix dquot leak after failed quota check
- fix a couple of problematic ASSERTS
- fix small aim7 perf regression in from new btree sibling validation
- clean up log incompat feature marking for new logged attribute
feature
- disallow logged attributes on legacy V4 filesystem formats.
- fix da state leak when freeing attr intents
- improve validation of the attr log items in recovery
- use slab caches for commonly used attr structures
- fix leaks of attr name/value buffer and reduce copying overhead
during intent logging
- remove some dead debug code from log recovery"
* tag 'xfs-5.19-for-linus-2' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: (33 commits)
xfs: fix xfs_ifree() error handling to not leak perag ref
xfs: move xfs_attr_use_log_assist usage out of libxfs
xfs: move xfs_attr_use_log_assist out of xfs_log.c
xfs: warn about LARP once per mount
xfs: implement per-mount warnings for scrub and shrink usage
xfs: don't log every time we clear the log incompat flags
xfs: convert buf_cancel_table allocation to kmalloc_array
xfs: don't leak xfs_buf_cancel structures when recovery fails
xfs: refactor buffer cancellation table allocation
xfs: don't leak btree cursor when insrec fails after a split
xfs: purge dquots after inode walk fails during quotacheck
xfs: assert in xfs_btree_del_cursor should take into account error
xfs: don't assert fail on perag references on teardown
xfs: avoid unnecessary runtime sibling pointer endian conversions
xfs: share xattr name and value buffers when logging xattr updates
xfs: do not use logged xattr updates on V4 filesystems
xfs: Remove duplicate include
xfs: reduce IOCB_NOWAIT judgment for retry exclusive unaligned DIO
xfs: Remove dead code
xfs: fix typo in comment
...
Use plain 255 instead, which also avoid introducing an additional header
dependency on <linux/types.h>
Fixes: 26859240e4ee ("txhash: Add socket option to control TX hash rethink behavior")
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Link: https://lore.kernel.org/r/20220531094345.13801-1-tklauser@distanz.ch
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In commit a670ff578f1f ("drm/msm/dpu: always use mdp device to scale
bandwidth") we fully moved interconnect stuff to the DPU driver. This
had no change for sc7180 but _did_ have an impact for other SoCs. It
made them match the sc7180 scheme.
Unfortunately, the sc7180 scheme seems like it was a bit broken.
Specifically the interconnect needs to be on for more than just the
DPU driver's AXI bus. In the very least it also needs to be on for the
DSI driver's AXI bus. This can be seen fairly easily by doing this on
a ChromeOS sc7180-trogdor class device:
set_power_policy --ac_screen_dim_delay=5 --ac_screen_off_delay=10
sleep 10
cd /sys/bus/platform/devices/ae94000.dsi/power
echo on > control
When you do that, you'll get a warning splat in the logs about
"gcc_disp_hf_axi_clk status stuck at 'off'".
One could argue that perhaps what I have done above is "illegal" and
that it can't happen naturally in the system because in normal system
usage the DPU is pretty much always on when DSI is on. That being
said:
* In official ChromeOS builds (admittedly a 5.4 kernel with backports)
we have seen that splat at bootup.
* Even though we don't use "autosuspend" for these components, we
don't use the "put_sync" variants. Thus plausibly the DSI could stay
"runtime enabled" past when the DPU is enabled. Techncially we
shouldn't do that if the DPU's suspend ends up yanking our clock.
Let's change things such that the "bare minimum" request for the
interconnect happens in the mdss driver again. That means that all of
the children can assume that the interconnect is on at the minimum
bandwidth. We'll then let the DPU request the higher amount that it
wants.
It should be noted that this isn't as hacky of a solution as it might
initially appear. Specifically:
* Since MDSS and DPU individually get their own references to the
interconnect then the framework will actually handle aggregating
them. The two drivers are _not_ clobbering each other.
* When the Qualcomm interconnect driver aggregates it takes the max of
all the peaks. Thus having MDSS request a peak, as we're doing here,
won't actually change the total interconnect bandwidth (it won't be
added to the request for the DPU). This perhaps explains why the
"average" requested in MDSS was historically 0 since that one
_would_ be added in.
NOTE also that in the downstream ChromeOS 5.4 and 5.15 kernels, we're
also seeing some RPMH hangs that are addressed by this fix. These
hangs are showing up in the field and on _some_ devices with enough
stress testing of suspend/resume. Specifically right at suspend time
with a stack crawl that looks like this (from chromeos-5.15 tree):
rpmh_write_batch+0x19c/0x240
qcom_icc_bcm_voter_commit+0x210/0x420
qcom_icc_set+0x28/0x38
apply_constraints+0x70/0xa4
icc_set_bw+0x150/0x24c
dpu_runtime_resume+0x50/0x1c4
pm_generic_runtime_resume+0x30/0x44
__genpd_runtime_resume+0x68/0x7c
genpd_runtime_resume+0x12c/0x20c
__rpm_callback+0x98/0x138
rpm_callback+0x30/0x88
rpm_resume+0x370/0x4a0
__pm_runtime_resume+0x80/0xb0
dpu_kms_enable_commit+0x24/0x30
msm_atomic_commit_tail+0x12c/0x630
commit_tail+0xac/0x150
drm_atomic_helper_commit+0x114/0x11c
drm_atomic_commit+0x68/0x78
drm_atomic_helper_disable_all+0x158/0x1c8
drm_atomic_helper_suspend+0xc0/0x1c0
drm_mode_config_helper_suspend+0x2c/0x60
msm_pm_prepare+0x2c/0x40
pm_generic_prepare+0x30/0x44
genpd_prepare+0x80/0xd0
device_prepare+0x78/0x17c
dpm_prepare+0xb0/0x384
dpm_suspend_start+0x34/0xc0
We don't completely understand all the mechanisms in play, but the
hang seemed to come and go with random factors. It's not terribly
surprising that the hang is gone after this patch since the line of
code that was failing is no longer present in the kernel.
Fixes: a670ff578f1f ("drm/msm/dpu: always use mdp device to scale bandwidth")
Fixes: c33b7c0389e1 ("drm/msm/dpu: add support for clk and bw scaling for display")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Tested-by: Jessica Zhang <quic_jesszhan@quicinc.com> # RB3 (sdm845) and
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/487884/
Link: https://lore.kernel.org/r/20220531160059.v2.1.Ie7f6d4bf8cce28131da31a43354727e417cae98d@changeid
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
The phys_enc->wb_idx is dereferencing before null checking, so move
it after checking.
Signed-off-by: Haowen Bai <baihaowen@meizu.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Fixes: d7d0e73f7de33 ("drm/msm/dpu: introduce the dpu_encoder_phys_* for
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/487606/
Link: https://lore.kernel.org/r/1653877196-23114-1-git-send-email-baihaowen@meizu.com
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Commit 58dca9810749 ("drm/msm/disp/dpu1: Add support for DSC in
encoder") added dsc_common_mode variable which was set to zero but then
again programmed, so drop the superfluous init.
Fixes: 58dca9810749 ("drm/msm/disp/dpu1: Add support for DSC in encoder")
Reported-by: kernel test robot <yujie.liu@intel.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Patchwork: https://patchwork.freedesktop.org/patch/487208/
Link: https://lore.kernel.org/r/20220525073912.2706505-1-vkoul@kernel.org
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
dp_catalog_ctrl_reset() will software reset DP controller. But it will
not reset programmable registers to default value. DP driver still have
to clear mask bits to interrupt status registers to disable interrupts
after software reset of controller.
At current implementation, dp_ctrl_reset_irq_ctrl() will software reset dp
controller but did not call dp_catalog_ctrl_enable_irq(false) to clear hpd
related interrupt mask bits to disable hpd related interrupts due to it
mistakenly think hpd related interrupt mask bits will be cleared by software
reset of dp controller automatically. This mistake may cause system to crash
during suspending procedure due to unexpected irq fired and trigger event
thread to access dp controller registers with controller clocks are disabled.
This patch fixes system crash during suspending problem by removing "enable"
flag condition checking at dp_ctrl_reset_irq_ctrl() so that hpd related
interrupt mask bits are cleared to prevent unexpected from happening.
Changes in v2:
-- add more details commit text
Changes in v3:
-- add synchrons_irq()
-- add atomic_t suspended
Changes in v4:
-- correct Fixes's commit ID
-- remove synchrons_irq()
Changes in v5:
-- revise commit text
Changes in v6:
-- add event_lock to protect "suspended"
Changes in v7:
-- delete "suspended" flag
Fixes: 989ebe7bc446 ("drm/msm/dp: do not initialize phy until plugin interrupt received")
Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Patchwork: https://patchwork.freedesktop.org/patch/486591/
Link: https://lore.kernel.org/r/1652804494-19650-1-git-send-email-quic_khsieh@quicinc.com
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
arm allnoconfig:
mm/oom_kill.c:60:25: warning: 'vm_oom_kill_table' defined but not used [-Wunused-variable]
60 | static struct ctl_table vm_oom_kill_table[] = {
| ^~~~~~~~~~~~~~~~~
Cc: Luis Chamberlain <mcgrof@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
This is reported by kmemleak detector:
unreferenced object 0xffffc900002a9000 (size 4096):
comm "kexec", pid 14950, jiffies 4295110793 (age 373.951s)
hex dump (first 32 bytes):
7f 45 4c 46 02 01 01 00 00 00 00 00 00 00 00 00 .ELF............
04 00 3e 00 01 00 00 00 00 00 00 00 00 00 00 00 ..>.............
backtrace:
[<0000000016a8ef9f>] __vmalloc_node_range+0x101/0x170
[<000000002b66b6c0>] __vmalloc_node+0xb4/0x160
[<00000000ad40107d>] crash_prepare_elf64_headers+0x8e/0xcd0
[<0000000019afff23>] crash_load_segments+0x260/0x470
[<0000000019ebe95c>] bzImage64_load+0x814/0xad0
[<0000000093e16b05>] arch_kexec_kernel_image_load+0x1be/0x2a0
[<000000009ef2fc88>] kimage_file_alloc_init+0x2ec/0x5a0
[<0000000038f5a97a>] __do_sys_kexec_file_load+0x28d/0x530
[<0000000087c19992>] do_syscall_64+0x3b/0x90
[<0000000066e063a4>] entry_SYSCALL_64_after_hwframe+0x44/0xae
In crash_prepare_elf64_headers(), a buffer is allocated via vmalloc() to
store elf headers. While it's not freed back to system correctly when
kdump kernel is reloaded or unloaded. Then memory leak is caused. Fix it
by introducing x86 specific function arch_kimage_file_post_load_cleanup(),
and freeing the buffer there.
And also remove the incorrect elf header buffer freeing code. Before
calling arch specific kexec_file loading function, the image instance has
been initialized. So 'image->elf_headers' must be NULL. It doesn't make
sense to free the elf header buffer in the place.
Three different people have reported three bugs about the memory leak on
x86_64 inside Redhat.
Link: https://lkml.kernel.org/r/20220223113225.63106-2-bhe@redhat.com
Signed-off-by: Baoquan He <bhe@redhat.com>
Acked-by: Dave Young <dyoung@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
We forget to call untrack_pfn() to pair with track_pfn_remap() when range
is not allowed to hotplug. Fix it by jump err_kasan.
Link: https://lkml.kernel.org/r/20220531122643.25249-1-linmiaohe@huawei.com
Fixes: bca3feaa0764 ("mm/memory_hotplug: prevalidate the address range being added with platform")
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Acked-by: Muchun Song <songmuchun@bytedance.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
When compound_nr(page) was used, page was not guaranteed to be the head of
the compound page and it could cause an infinite loop. Fix it by calling
it on the head page.
Link: https://lkml.kernel.org/r/20220531024450.2498431-1-zi.yan@sent.com
Fixes: b2c9e2fbba32 ("mm: make alloc_contig_range work at pageblock granularity")
Signed-off-by: Zi Yan <ziy@nvidia.com>
Reported-by: Anshuman Khandual <anshuman.khandual@arm.com>
Link: https://lore.kernel.org/linux-mm/20220530115027.123341-1-anshuman.khandual@arm.com/
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Reviewed-by: Miaohe Lin <linmiaohe@huawei.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Acked-by: Muchun Song <songmuchun@bytedance.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Qian Cai <quic_qiancai@quicinc.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Eric Ren <renzhengeek@gmail.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The following:
commit 47010c040dec ("mm: hugetlb_vmemmap: cleanup CONFIG_HUGETLB_PAGE_FREE_VMEMMAP*")
forgot to update CONFIG_HUGETLB_PAGE_FREE_VMEMMAP_DEFAULT_ON used in
vmemmap_optimize_mode to CONFIG_HUGETLB_PAGE_OPTIMIZE_VMEMMAP_DEFAULT_ON.
The result is we cannot enable hugetlb_optimize_vmemmap at boot time when
we configure CONFIG_HUGETLB_PAGE_OPTIMIZE_VMEMMAP_DEFAULT_ON. Fix it.
Link: https://lkml.kernel.org/r/20220527081948.68832-1-songmuchun@bytedance.com
Fixes: 47010c040dec ("mm: hugetlb_vmemmap: cleanup CONFIG_HUGETLB_PAGE_FREE_VMEMMAP*")
Signed-off-by: Muchun Song <songmuchun@bytedance.com>
Reported-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Add the maintainer information for the z3fold compressed page allocator.
Also Add myself as a reviewer.
Link: https://lkml.kernel.org/r/20220530114505.52367-1-linmiaohe@huawei.com
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Cc: Vitaly Wool <vitaly.wool@konsulko.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Delay accounting does not track the delay of write-protect copy. When
tasks trigger many write-protect copys(include COW and unsharing of
anonymous pages[1]), it may spend a amount of time waiting for them. To
get the delay of tasks in write-protect copy, could help users to evaluate
the impact of using KSM or fork() or GUP.
Also update tools/accounting/getdelays.c:
/ # ./getdelays -dl -p 231
print delayacct stats ON
listen forever
PID 231
CPU count real total virtual total delay total delay average
6247 1859000000 2154070021 1674255063 0.268ms
IO count delay total delay average
0 0 0ms
SWAP count delay total delay average
0 0 0ms
RECLAIM count delay total delay average
0 0 0ms
THRASHING count delay total delay average
0 0 0ms
COMPACT count delay total delay average
3 72758 0ms
WPCOPY count delay total delay average
3635 271567604 0ms
[1] commit 31cc5bc4af70("mm: support GUP-triggered unsharing of anonymous pages")
Link: https://lkml.kernel.org/r/20220409014342.2505532-1-yang.yang29@zte.com.cn
Signed-off-by: Yang Yang <yang.yang29@zte.com.cn>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Jiang Xuexin <jiang.xuexin@zte.com.cn>
Reviewed-by: Ran Xiaokai <ran.xiaokai@zte.com.cn>
Reviewed-by: wangyong <wang.yong12@zte.com.cn>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Balbir Singh <bsingharora@gmail.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The icicle device tree is in a "random" order, so clean it up and sort
its elements alphabetically to match the newly added PolarBerry dts.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20220509142610.128590-11-conor.dooley@microchip.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Fix the sort order of the status properties, remove some
extra whitespace in the mmc entry & add whitespace to the mac entry
containing the phys so that the dt is easier to read.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20220509142610.128590-10-conor.dooley@microchip.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Currently mpfs-fabric.dtsi is included by mpfs.dtsi - which is fine
currently since there is only one board with this SoC upstream.
However if another board was added, it would include the fabric contents
of the Icicle Kit's reference design. To avoid this, rename
mpfs-fabric.dtsi to mpfs-icicle-kit-fabric.dtsi & include it in the dts
rather than mpfs.dtsi.
mpfs-icicle-kit-fabric.dtsi specifically matches the 22.03 reference
design for the icicle kit's FPGA fabric & an older version of the
design may not have the i2c or pwm devices - so add the compatible
string to document this.
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20220509142610.128590-6-conor.dooley@microchip.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Add a compatible for the icicle kit's reference design. This represents
the FPGA fabric's contents & is versioned to denote which release of the
reference design it applies to.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220509142610.128590-5-conor.dooley@microchip.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Having the SoC vendor both as the directory and in the filename adds
little. Remove microchip from the filenames so that the files will
resemble the other directories in riscv (and arm64). The new names
follow a soc-board.dts & soc{,-fabric}.dtsi pattern.
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20220509142610.128590-4-conor.dooley@microchip.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
The MPFS system controller has no registers of its own, so move it out
of the soc node to avoid dtbs_check warnings:
arch/riscv/boot/dts/microchip/microchip-mpfs-icicle-kit.dtb: soc: syscontroller: {'compatible': ['microchip,mpfs-sys-controller'], 'mboxes': [[15, 0]], 'status': ['okay']} should not be valid under {'type': 'object'}
Reported-by: Palmer Dabbelt <palmer@rivosinc.com>
Suggested-by: Rob Herring <robh@kernel.org>
Fixes: 528a5b1f2556 ("riscv: dts: microchip: add new peripherals to icicle kit device tree")
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20220509142610.128590-3-conor.dooley@microchip.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
The clock properties in the icicle kit's memory entries cause dtbs_check
errors:
arch/riscv/boot/dts/microchip/microchip-mpfs-icicle-kit.dtb: /: memory@80000000: 'clocks' does not match any of the regexes: 'pinctrl-[0-9]+'
Get rid of the clocks to avoid the errors.
Reported-by: Palmer Dabbelt <palmer@rivosinc.com>
Fixes: 0fa6107eca41 ("RISC-V: Initial DTS for Microchip ICICLE board")
Fixes: 5b28df37d311 ("riscv: dts: microchip: update peripherals in icicle kit device tree")
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20220509142610.128590-2-conor.dooley@microchip.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
New driver:
- Renesas RZN1 rtc
Drivers:
- sun6i: Add nvmem support
-----BEGIN PGP SIGNATURE-----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=D9z8
-----END PGP SIGNATURE-----
Merge tag 'rtc-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux
Pull RTC updates from Alexandre Belloni:
"A new driver represents the bulk of the changes and then we get the
usual small fixes.
New driver:
- Renesas RZN1 rtc
Drivers:
- sun6i: Add nvmem support"
* tag 'rtc-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux:
rtc: mxc: Silence a clang warning
rtc: rzn1: Fix a variable type
rtc: rzn1: Fix error code in probe
rtc: rzn1: Avoid mixing variables
rtc: ftrtc010: Fix error handling in ftrtc010_rtc_probe
rtc: mt6397: check return value after calling platform_get_resource()
rtc: rzn1: fix platform_no_drv_owner.cocci warning
rtc: gamecube: Add missing iounmap in gamecube_rtc_read_offset_from_sram
rtc: meson: Fix email address in MODULE_AUTHOR
rtc: simplify the return expression of rx8025_set_offset()
rtc: pcf85063: Add a compatible entry for pca85073a
dt-binding: pcf85063: Add an entry for pca85073a
MAINTAINERS: Add myself as maintainer of the RZN1 RTC driver
rtc: rzn1: Add oscillator offset support
rtc: rzn1: Add alarm support
rtc: rzn1: Add new RTC driver
dt-bindings: rtc: rzn1: Describe the RZN1 RTC
rtc: sun6i: Add NVMEM provider
Subsystem:
- yaml conversion of the DT bindings
-----BEGIN PGP SIGNATURE-----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=jlzF
-----END PGP SIGNATURE-----
Merge tag 'i3c/for-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux
Pull i3c updates from Alexandre Belloni:
"Only clean ups and no functional change this cycle. A couple of yaml
conversions of the DT bindings, and a couple of code cleanups"
* tag 'i3c/for-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux:
MAINTAINERS: rectify entries for some i3c drivers after dt conversion
i3c: master: svc: fix returnvar.cocci warning
i3c/master: simplify the return expression of i3c_hci_remove()
dt-bindings: i3c: Convert snps,dw-i3c-master to DT schema
dt-bindings: i3c: Convert cdns,i3c-master to DT schema
devices.
- Fix DM verity target so that it cannot be switched to a different DM
target type (e.g. dm-linear) via DM table reload.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEJfWUX4UqZ4x1O2wixSPxCi2dA1oFAmKX0aMACgkQxSPxCi2d
A1okwgf+NMX+Il0qgda1mZrId7nVdQGGyv7uapLXIxRm5Z+LcUxqw+hqzoeabeQ/
7rou3KqsXuPcpu1AATPHis0Ub9CcXwtpbevf2rmh3Ey4kqLLuFqUP6IjwvFtyp2Y
Ms9QAhTvIZXxAPcrb7HH2v7ULOCmdI89OAr8Q/hQ+F4wjI8BO2tNJ4WfxeqpMy5M
EFwEO485Ct+XvLDek4+7hYxvSO/6ANgjgzWx4dwsP+iC9SFJurvNVnoXpIl+69DU
v8R6Udp0buQqFscyfRbHVOYxVkBROMWg/lKX/4hhgiSoV8j5xSm9hp3S13BffHj7
Bbp8cW+E6IkaASDpIRBAa/6a6k7K1w==
=+C+g
-----END PGP SIGNATURE-----
Merge tag 'for-5.19/dm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull device mapper fixes from Mike Snitzer:
- Fix DM core's dm_table_supports_poll to return false if target has no
data devices.
- Fix DM verity target so that it cannot be switched to a different DM
target type (e.g. dm-linear) via DM table reload.
* tag 'for-5.19/dm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
dm verity: set DM_TARGET_IMMUTABLE feature flag
dm table: fix dm_table_supports_poll to return false if no data devices
Change the of_device_get_match_data() cast to (uintptr_t)
to silence the following clang warning:
drivers/rtc/rtc-mxc.c:315:19: warning: cast to smaller integer type 'enum imx_rtc_type' from 'const void *' [-Wvoid-pointer-to-enum-cast]
Reported-by: kernel test robot <lkp@intel.com>
Fixes: ba7aa63000f2 ("rtc: mxc: use of_device_get_match_data")
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20220526011459.1167197-1-festevam@gmail.com
power-supply core:
- init power_supply_info struct to zero
drivers:
- bq27xxx: expose data for uncalibrated battery
- bq24190-charger: use pm_runtime_resume_and_get
- ab8500_fg: allocate wq in probe
- axp288_fuel_gauge: drop BIOS version from "T3 MRD" quirk
- axp288_fuel_gauge: modify "T3 MRD" quirk to also fix "One Mix 1"
-----BEGIN PGP SIGNATURE-----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=df7Q
-----END PGP SIGNATURE-----
Merge tag 'for-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply
Pull power supply and reset updates from Sebastian Reichel:
"Not much from the power-supply subsystem this time around, since I was
busy most of the cycle. This also contains some fixes that I
originally planned to send for 5.18. Apart from this there is nothing
noteworthy.
Power-supply core:
- init power_supply_info struct to zero
Drivers:
- bq27xxx: expose data for uncalibrated battery
- bq24190-charger: use pm_runtime_resume_and_get
- ab8500_fg: allocate wq in probe
- axp288_fuel_gauge: drop BIOS version from 'T3 MRD' quirk
- axp288_fuel_gauge: modify 'T3 MRD' quirk to also fix 'One Mix 1'"
* tag 'for-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply:
power: supply: bq24190_charger: using pm_runtime_resume_and_get instead of pm_runtime_get_sync
power: supply: bq27xxx: expose battery data when CI=1
power: supply: ab8500_fg: Allocate wq in probe
power: supply: axp288_fuel_gauge: Drop BIOS version check from "T3 MRD" DMI quirk
power: supply: axp288_fuel_gauge: Fix battery reporting on the One Mix 1
power: supply: core: Initialize struct to zero
- Improvements to mlx5 vfio-pci variant driver, including support
for parallel migration per PF (Yishai Hadas)
- Remove redundant iommu_present() check (Robin Murphy)
- Ongoing refactoring to consolidate the VFIO driver facing API
to use vfio_device (Jason Gunthorpe)
- Use drvdata to store vfio_device among all vfio-pci and variant
drivers (Jason Gunthorpe)
- Remove redundant code now that IOMMU core manages group DMA
ownership (Jason Gunthorpe)
- Remove vfio_group from external API handling struct file ownership
(Jason Gunthorpe)
- Correct typo in uapi comments (Thomas Huth)
- Fix coccicheck detected deadlock (Wan Jiabing)
- Use rwsem to remove races and simplify code around container and
kvm association to groups (Jason Gunthorpe)
- Harden access to devices in low power states and use runtime PM to
enable d3cold support for unused devices (Abhishek Sahu)
- Fix dma_owner handling of fake IOMMU groups (Jason Gunthorpe)
- Set driver_managed_dma on vfio-pci variant drivers (Jason Gunthorpe)
- Pass KVM pointer directly rather than via notifier (Matthew Rosato)
-----BEGIN PGP SIGNATURE-----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=etEI
-----END PGP SIGNATURE-----
Merge tag 'vfio-v5.19-rc1' of https://github.com/awilliam/linux-vfio
Pull vfio updates from Alex Williamson:
- Improvements to mlx5 vfio-pci variant driver, including support for
parallel migration per PF (Yishai Hadas)
- Remove redundant iommu_present() check (Robin Murphy)
- Ongoing refactoring to consolidate the VFIO driver facing API to use
vfio_device (Jason Gunthorpe)
- Use drvdata to store vfio_device among all vfio-pci and variant
drivers (Jason Gunthorpe)
- Remove redundant code now that IOMMU core manages group DMA ownership
(Jason Gunthorpe)
- Remove vfio_group from external API handling struct file ownership
(Jason Gunthorpe)
- Correct typo in uapi comments (Thomas Huth)
- Fix coccicheck detected deadlock (Wan Jiabing)
- Use rwsem to remove races and simplify code around container and kvm
association to groups (Jason Gunthorpe)
- Harden access to devices in low power states and use runtime PM to
enable d3cold support for unused devices (Abhishek Sahu)
- Fix dma_owner handling of fake IOMMU groups (Jason Gunthorpe)
- Set driver_managed_dma on vfio-pci variant drivers (Jason Gunthorpe)
- Pass KVM pointer directly rather than via notifier (Matthew Rosato)
* tag 'vfio-v5.19-rc1' of https://github.com/awilliam/linux-vfio: (38 commits)
vfio: remove VFIO_GROUP_NOTIFY_SET_KVM
vfio/pci: Add driver_managed_dma to the new vfio_pci drivers
vfio: Do not manipulate iommu dma_owner for fake iommu groups
vfio/pci: Move the unused device into low power state with runtime PM
vfio/pci: Virtualize PME related registers bits and initialize to zero
vfio/pci: Change the PF power state to D0 before enabling VFs
vfio/pci: Invalidate mmaps and block the access in D3hot power state
vfio: Change struct vfio_group::container_users to a non-atomic int
vfio: Simplify the life cycle of the group FD
vfio: Fully lock struct vfio_group::container
vfio: Split up vfio_group_get_device_fd()
vfio: Change struct vfio_group::opened from an atomic to bool
vfio: Add missing locking for struct vfio_group::kvm
kvm/vfio: Fix potential deadlock problem in vfio
include/uapi/linux/vfio.h: Fix trivial typo - _IORW should be _IOWR instead
vfio/pci: Use the struct file as the handle not the vfio_group
kvm/vfio: Remove vfio_group from kvm
vfio: Change vfio_group_set_kvm() to vfio_file_set_kvm()
vfio: Change vfio_external_check_extension() to vfio_file_enforced_coherent()
vfio: Remove vfio_external_group_match_file()
...
Commit 4bd69ecfa672 ("dt-bindings: i3c: Convert cdns,i3c-master to DT
schema") and commit 6742ca620bd9 ("dt-bindings: i3c: Convert
snps,dw-i3c-master to DT schema") convert some i3c dt-bindings to yaml,
but miss to adjust its reference in MAINTAINERS.
Hence, ./scripts/get_maintainer.pl --self-test=patterns complains about
broken references.
Repair these file references in I3C DRIVER FOR CADENCE I3C MASTER IP and
I3C DRIVER FOR SYNOPSYS DESIGNWARE.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20220601074212.19984-1-lukas.bulwahn@gmail.com
All existing vendor DTSes are using "cpm_slcr" reg followed by "cfg" reg.
This order is also suggested by node name which is pcie@fca10000 which
suggests that cpm_slcr register should be the first.
Driver itself is using devm_platform_ioremap_resource_byname() for both
names that's why there is no functional change even on description which
are using current order.
But still prefer to change order to cover currently used description.
Fixes: e22fadb1d014 ("PCI: xilinx-cpm: Add YAML schemas for Versal CPM Root Port")
Signed-off-by: Bharat Kumar Gogada <bharat.kumar.gogada@xilinx.com>
Reviewed-by: Michal Simek <michal.simek@amd.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220516102217.25960-1-bharat.kumar.gogada@xilinx.com
- Leave compressed inodes unsupported in fscache mode for now;
- Avoid crash when using tracepoint cachefiles_prep_read;
- Fix `backmost' behavior due to a recent cleanup;
- Update documentation for better description of recent new features;
- Several decompression cleanups w/o logical change.
-----BEGIN PGP SIGNATURE-----
iIcEABYIAC8WIQThPAmQN9sSA0DVxtI5NzHcH7XmBAUCYpeFXxEceGlhbmdAa2Vy
bmVsLm9yZwAKCRA5NzHcH7XmBC9eAQC8YSePEG+YCGbmOCGadSuBsgU+OXzKGpCV
KxPyy3SmPQEAyNCDk11HoaYDRywS8TbMPntlyRfXvtEGSxbRe+5d1Qc=
=4RnO
-----END PGP SIGNATURE-----
Merge tag 'erofs-for-5.19-rc1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs
Pull more erofs updates from Gao Xiang:
"This is a follow-up to the main updates, including some fixes of
fscache mode related to compressed inodes and a cachefiles tracepoint.
There is also a patch to fix an unexpected decompression strategy
change due to a cleanup in the past. All the fixes are quite small.
Apart from these, documentation is also updated for a better
description of recent new features.
In addition, this has some trivial cleanups without actual code logic
changes, so I could have a more recent codebase to work on folios and
avoiding the PG_error page flag for the next cycle.
Summary:
- Leave compressed inodes unsupported in fscache mode for now
- Avoid crash when using tracepoint cachefiles_prep_read
- Fix `backmost' behavior due to a recent cleanup
- Update documentation for better description of recent new features
- Several decompression cleanups w/o logical change"
* tag 'erofs-for-5.19-rc1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs:
erofs: fix 'backmost' member of z_erofs_decompress_frontend
erofs: simplify z_erofs_pcluster_readmore()
erofs: get rid of label `restart_now'
erofs: get rid of `struct z_erofs_collection'
erofs: update documentation
erofs: fix crash when enable tracepoint cachefiles_prep_read
erofs: leave compressed inodes unsupported in fscache mode for now
In AFS, a directory is handled as a file that the client downloads and
parses locally for the purposes of performing lookup and getdents
operations. The in-kernel afs filesystem has a number of functions that
do this.
A directory file is arranged as a series of 2K blocks divided into
32-byte slots, where a directory entry occupies one or more slots, plus
each block starts with one or more metadata blocks.
When parsing a block, if the last slots are occupied by a dirent that
occupies more than a single slot and the file position points at a slot
that's not the initial one, the logic in afs_dir_iterate_block() that
skips over it won't advance the file pointer to the end of it. This
will cause an infinite loop in getdents() as it will keep retrying that
block and failing to advance beyond the final entry.
Fix this by advancing the file pointer if the next entry will be beyond
it when we skip a block.
This was found by the generic/676 xfstest but can also be triggered with
something like:
~/xfstests-dev/src/t_readdir_3 /xfstest.test/z 4000 1
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Marc Dionne <marc.dionne@auristor.com>
Tested-by: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Link: http://lore.kernel.org/r/165391973497.110268.2939296942213894166.stgit@warthog.procyon.org.uk/
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Quite a large number of conversions this time around, courtesy of Uwe
who has been working tirelessly on these. No drivers of the legacy API
are left at this point, so as a next step the old API can be removed.
Support is added for a few new devices such as the Xilinx AXI timer-
based PWMs and the PWM IP found on Sunplus SoCs.
Other than that, there's a number of fixes, cleanups and optimizations.
-----BEGIN PGP SIGNATURE-----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=CwnJ
-----END PGP SIGNATURE-----
Merge tag 'pwm/for-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm
Pull pwm updates from Thierry Reding:
"Quite a large number of conversions this time around, courtesy of Uwe
who has been working tirelessly on these. No drivers of the legacy API
are left at this point, so as a next step the old API can be removed.
Support is added for a few new devices such as the Xilinx AXI timer-
based PWMs and the PWM IP found on Sunplus SoCs.
Other than that, there's a number of fixes, cleanups and optimizations"
* tag 'pwm/for-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm: (43 commits)
pwm: pwm-cros-ec: Add channel type support
dt-bindings: google,cros-ec-pwm: Add the new -type compatible
dt-bindings: Add mfd/cros_ec definitions
pwm: Document that the pinstate of a disabled PWM isn't reliable
pwm: twl-led: Implement .apply() callback
pwm: lpc18xx: Implement .apply() callback
pwm: mediatek: Implement .apply() callback
pwm: lpc32xx: Implement .apply() callback
pwm: tegra: Implement .apply() callback
pwm: stmpe: Implement .apply() callback
pwm: sti: Implement .apply() callback
pwm: pwm-mediatek: Add support for MediaTek Helio X10 MT6795
dt-bindings: pwm: pwm-mediatek: Add documentation for MT6795 SoC
pwm: tegra: Optimize period calculation
pwm: renesas-tpu: Improve precision of period and duty_cycle calculation
pwm: renesas-tpu: Improve maths to compute register settings
pwm: renesas-tpu: Rename variables to match the usual naming
pwm: renesas-tpu: Implement .apply() callback
pwm: renesas-tpu: Make use of devm functions
pwm: renesas-tpu: Make use of dev_err_probe()
...
This corrects the check for irq_of_parse_and_map() failures in the
Qualcomm SMD driver and fixes unregistration and a couple of double free
in the virtio rpmsg driver.
-----BEGIN PGP SIGNATURE-----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=N17f
-----END PGP SIGNATURE-----
Merge tag 'rpmsg-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux
Pull rpmsg updates from Bjorn Andersson:
"This corrects the check for irq_of_parse_and_map() failures in the
Qualcomm SMD driver and fixes unregistration and a couple of double
free in the virtio rpmsg driver"
* tag 'rpmsg-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux:
rpmsg: qcom_smd: Fix returning 0 if irq_of_parse_and_map() fails
rpmsg: virtio: Fix the unregistration of the device rpmsg_ctrl
rpmsg: virtio: Fix possible double free in rpmsg_virtio_add_ctrl_dev()
rpmsg: virtio: Fix possible double free in rpmsg_probe()
rpmsg: qcom_smd: Fix irq_of_parse_and_map() return value
This fixes a race condition in the user space interface for starting and
stopping remote processors, it makes the ELF loader properly skip zero
memsz segments and it cleans up the debugfs tracefile code a bit by not
checking for errors.
It introduces support for controlling the audio DSP on Qualcomm MSM8226,
as well as audio and compute DSPs on Qualcomm SC8280XP.
It makes it possible to specify the firmware path for Mediatek's remote
processors, fixes a double free in the SCP driver and addresses an issue
with the SRAM initialization on MT8195.
Lastly it deprecates the custom ELF loader in the iMX remoteproc driver,
in favor of using the shared one.
-----BEGIN PGP SIGNATURE-----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=UwTC
-----END PGP SIGNATURE-----
Merge tag 'rproc-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux
Pull remoteproc updates from Bjorn Andersson:
"This fixes a race condition in the user space interface for starting
and stopping remote processors, it makes the ELF loader properly skip
zero memsz segments and it cleans up the debugfs tracefile code a bit
by not checking for errors.
It introduces support for controlling the audio DSP on Qualcomm
MSM8226, as well as audio and compute DSPs on Qualcomm SC8280XP.
It makes it possible to specify the firmware path for Mediatek's
remote processors, fixes a double free in the SCP driver and addresses
an issue with the SRAM initialization on MT8195.
Lastly it deprecates the custom ELF loader in the iMX remoteproc
driver, in favor of using the shared one"
* tag 'rproc-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux: (21 commits)
dt-bindings: remoteproc: mediatek: Add optional memory-region to mtk,scp
dt-bindings: remoteproc: mediatek: Make l1tcm reg exclusive to mt819x
dt-bindings: remoteproc: st,stm32-rproc: Fix phandle-array parameters description
remoteproc: imx_rproc: Support i.MX93
dt-bindings: remoteproc: imx_rproc: Support i.MX93
remoteproc: qcom: pas: Add MSM8226 ADSP support
dt-bindings: remoteproc: qcom: pas: Add MSM8226 adsp
remoteproc: mediatek: Allow reading firmware-name from DT
dt-bindings: remoteproc: mediatek: Add firmware-name property
remoteproc: qcom: pas: Add sc8280xp remoteprocs
dt-bindings: remoteproc: qcom: pas: Add sc8280xp adsp and nsp pair
dt-bindings: remoteproc: mediatek: Add interrupts property to mtk,scp
remoteproc: imx_rproc: Ignore create mem entry for resource table
remoteproc: core: Move state checking to remoteproc_core
remoteproc: core: Remove state checking before calling rproc_boot()
remoteproc: imx_dsp_rproc: Make rsc_table optional
remoteproc: imx_dsp_rproc: use common rproc_elf_load_segments
remoteproc: elf_loader: skip segment with memsz as zero
remoteproc: mtk_scp: Fix a potential double free
remoteproc: Don't bother checking the return value of debugfs_create*
...
A couple of fixes that came in during the merge window, a driver
fix for spurious timeouts in the fsi driver and an improvement to
make the core display error messages for transfer_one_message()
to help people debug things.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmKXHOwACgkQJNaLcl1U
h9Cxtgf+KCYOZovyBpvHaGuwUrf5fJ3SEbS5BaEhGjyQfTSeSbZuct0+gREJbBu4
AkEOt1/VXWm3EILFbLJV1xsvIj7xhQMwGRhoKEAZ0wjtV/YK2IMC6ISvrDZL2Prr
+A/p5PJu0dHLFlOUfKbkEMa2Ez/Gm/BUR6sfCzswqG6qebRcVF6svctZ/gm+Dqvy
cBvJxqIbSdYwzAqkbrTCZiQgbtJrntagaP4WtpReTMpqrLuXD/VBFK8anzhVsREz
wCTFBi0tSSe6yXOgtGc1Gzvj2wFZ2LRGPvV7nLSfQ2YaruoSM1rwo/xPxtWxsn85
MK8dp1L5d0j7LKzG2q/gPhih0oA1Bg==
=gf5o
-----END PGP SIGNATURE-----
Merge tag 'spi-fix-v5.19-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"A couple of fixes that came in during the merge window: a driver fix
for spurious timeouts in the fsi driver and an improvement to make the
core display error messages for transfer_one_message() to help people
debug things"
* tag 'spi-fix-v5.19-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: core: Display return code when failing to transfer message
spi: fsi: Fix spurious timeout
Pull pcmcia updates from Dominik Brodowski:
"A few odd cleanups and fixes, including a Kconfig fix to add a
required dependency on MIPS"
* 'pcmcia-next' of git://git.kernel.org/pub/scm/linux/kernel/git/brodo/linux:
pcmcia: Use platform_get_irq() to get the interrupt
pcmcia: db1xxx_ss: restrict to MIPS_DB1XXX boards
drivers/pcmcia: Fix typo in comment
