IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Pass the FBC instance instead of the crtc to a bunch of places.
We also adjust intel_fbc_post_update() to do the
intel_fbc_get_reg_params() things instead of doing it from the lower
level function (which also gets called for front buffer tracking).
Nothing in there will change during front buffer updates.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211124113652.22090-8-ville.syrjala@linux.intel.com
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
There's no need to store all this stuff in intel_fbc_state_cache.
Just check it all against the plane/crtc states and store only
what we need. Probably more should get nuked still, but this
is a start.
So what we'll do is:
- each plane will check its own state and update its local
no_fbc_reason
- the per-plane no_fbc_reason (if any) then gets propagated
to the cache->no_fbc_reason while doing the actual update
- fbc->no_fbc_reason gets updated in the end with either
the value from the cache or directly from frontbuffer
tracking
It's still a bit messy, but should hopefuly get cleaned up
more in the future. At least now we can observe each plane's
reasons for rejecting FBC now more consistently, and we don't
have so mcuh redundant state store all over the place.
v2: store no_fbc_reason per-plane instead of per-pipe
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211124113652.22090-4-ville.syrjala@linux.intel.com
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Let's just stick to 32bit mmio accesses so we can get rid
of the bare "uncore" reg access in display code. The register
are defined as 32bit in the spec anyway.
We could define a 64bit "de" variant I suppose, but doesn't
really make much sense just for this one case, and when we
start to use the DSB for this stuff we'd also need another
64bit variant for that. Just easier to do 32bit always.
While at it we can reorder stuff a bit so that we write the
registers in order of increasing offset (more or less).
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211201152552.7821-2-ville.syrjala@linux.intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
This workaround is documented a bit strangely in the bspec; it's listed
as an A0 workaround, but the description clarifies that the workaround
is implicitly handled by the hardware and what the driver really needs
to do is program a chicken bit to reenable some internal behavior.
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Clint Taylor <Clinton.A.Taylor@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211116174818.2128062-3-matthew.d.roper@intel.com
PLANE_CUS_CTL has a restriction of 4096 width even though
PLANE_SIZE and scaler size registers supports max 5120.
Take care of this restriction in max_width.
Without this patch, when 5k content is sent on HDR plane
with NV12 content, FIFO underrun is seen and screen blanks
out.
v2: Addressed review comments from Ville. Added separate
functions for max_width - for HDR and SDR
v3: Addressed review comments from Ville. Changed names of
HDR and SDR max_width functions to icl_hdr_plane_max_width
and icl_sdr_plane_max_width
v4: Fixed paranthesis alignment. No code change
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Vidya Srinivas <vidya.srinivas@intel.com>
[vsyrjala: Fix alignment]
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211202110836.17536-1-vidya.srinivas@intel.com
drm/i915 feature pull for v5.17:
Features and functionality:
- Implement per-lane DP drive settings for ICL+ (Ville)
- Enable runtime pm autosuspend by default (Tilak Tangudu)
- ADL-P DSI support (Vandita)
- Add support for pipe C and D DMC firmware (Anusha)
- Implement (near)atomic gamma LUT updates via vblank workers (Ville)
- Split plane updates to noarm+arm phases (Ville)
- Remove the CCS FB stride restrictions on ADL-P (Imre)
- Add PSR selective fetch support for biplanar formats (Jouni)
- Add support for display audio codec keepalive (Kai)
- VRR platform support for display 11 (Manasi)
Refactoring and cleanups:
- FBC refactoring and cleanups preparing for multiple FBC instances (Ville)
- PCH modeset refactoring, move to its own file (Ville)
- Refactor and simplify handling of modifiers (Imre)
- PXP cleanups (Ville)
- Display header and include refactoring (Jani)
- Some register macro cleanups (Ville)
- Refactor DP HDMI DFP limit code (Ville)
Fixes:
- Disable DSB usage for now due to incorrect gamma LUT updates (Ville)
- Check async flip state of every crtc and plane only once (José)
- Fix DPT FB suspend/resume (Imre)
- Fix black screen on reboot due to disabled DP++ TMDS output buffers (Ville)
- Don't request GMBUS to generate irqs when called while irqs are off (Ville)
- Fix type1 DVI DP dual mode adapter heuristics for modern platforms (Ville)
- Fix fix integer overflow in 128b/132b data rate calculation (Jani)
- Fix bigjoiner state readout (Ville)
- Build fix for non-x86 (Siva)
- PSR fixes (José, Jouni, Ville)
- Disable ADL-P underrun recovery (José)
- Fix DP link parameter usage before valid DPCD (Imre)
- VRR vblank and frame counter fixes (Ville)
- Fix fastsets on TypeC ports following a non-blocking modeset (Imre)
- Compiler warning fixes (Nathan Chancellor)
- Fix DSI HS mode commands (William Tseng)
- Error return fixes (Dan Carpenter)
- Update memory bandwidth calculations (Radhakrishna)
- Implement WM0 cursor WA for DG2 (Stan)
- Fix DSI Double pixelclock on read-back for dual-link panels (Hans de Goede)
- HDMI 2.1 PCON FRL configuration fixes (Ankit)
Merges:
- DP link training delay helpers, via topic branch (Jani)
- Backmerge drm-next (Jani)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/87v909it0t.fsf@intel.com
While working on supporting the Intel HDR backlight interface, I noticed
that there's a couple of laptops that will very rarely manage to boot up
without detecting Intel HDR backlight support - even though it's supported
on the system. One example of such a laptop is the Lenovo P17 1st
generation.
Following some investigation Ville Syrjälä did through the docs they have
available to them, they discovered that there's actually supposed to be a
30ms wait after writing the source OUI before we begin setting up the rest
of the backlight interface.
This seems to be correct, as adding this 30ms delay seems to have
completely fixed the probing issues I was previously seeing. So - let's
start performing a 30ms wait after writing the OUI, which we do in a manner
similar to how we keep track of PPS delays (e.g. record the timestamp of
the OUI write, and then wait for however many ms are left since that
timestamp right before we interact with the backlight) in order to avoid
waiting any longer then we need to. As well, this also avoids us performing
this delay on systems where we don't end up using the HDR backlight
interface.
V3:
* Move last_oui_write into intel_dp
V2:
* Move panel delays into intel_pps
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Fixes: 4a8d79901d5b ("drm/i915/dp: Enable Intel's HDR backlight interface (only SDR for now)")
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: <stable@vger.kernel.org> # v5.12+
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211130212912.212044-1-lyude@redhat.com
(cherry picked from commit c7c90b0b8418a97d3aa8b39aae1992908948efad)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
With both integrated and discrete Intel GPUs in a system, the current
global check of intel_iommu_gfx_mapped, as done from intel_vtd_active()
may not be completely accurate.
In this patch we add i915 parameter to intel_vtd_active() in order to
prepare it for multiple GPUs and we also change the check away from Intel
specific intel_iommu_gfx_mapped (global exported by the Intel IOMMU
driver) to probing the presence of IOMMU on a specific device using
device_iommu_mapped().
This will return true both for IOMMU pass-through and address translation
modes which matches the current behaviour. If in the future we wanted to
distinguish between these two modes we could either use
iommu_get_domain_for_dev() and check for __IOMMU_DOMAIN_PAGING bit
indicating address translation, or ask for a new API to be exported from
the IOMMU core code.
v2:
* Check for dmar translation specifically, not just iommu domain. (Baolu)
v3:
* Go back to plain "any domain" check for now, rewrite commit message.
v4:
* Use device_iommu_mapped. (Robin, Baolu)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Lu Baolu <baolu.lu@linux.intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Robin Murphy <robin.murphy@arm.com>
Acked-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211126141424.493753-1-tvrtko.ursulin@linux.intel.com
While working on supporting the Intel HDR backlight interface, I noticed
that there's a couple of laptops that will very rarely manage to boot up
without detecting Intel HDR backlight support - even though it's supported
on the system. One example of such a laptop is the Lenovo P17 1st
generation.
Following some investigation Ville Syrjälä did through the docs they have
available to them, they discovered that there's actually supposed to be a
30ms wait after writing the source OUI before we begin setting up the rest
of the backlight interface.
This seems to be correct, as adding this 30ms delay seems to have
completely fixed the probing issues I was previously seeing. So - let's
start performing a 30ms wait after writing the OUI, which we do in a manner
similar to how we keep track of PPS delays (e.g. record the timestamp of
the OUI write, and then wait for however many ms are left since that
timestamp right before we interact with the backlight) in order to avoid
waiting any longer then we need to. As well, this also avoids us performing
this delay on systems where we don't end up using the HDR backlight
interface.
V3:
* Move last_oui_write into intel_dp
V2:
* Move panel delays into intel_pps
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Fixes: 4a8d79901d5b ("drm/i915/dp: Enable Intel's HDR backlight interface (only SDR for now)")
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: <stable@vger.kernel.org> # v5.12+
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211130212912.212044-1-lyude@redhat.com
Rather than stealing bits from i915_sw_fence function pointer use
separate fields for function pointer and flags. If using two different
fields, the 4 byte alignment for the i915_sw_fence function pointer can
also be dropped.
v2:
(CI)
- Set new function field rather than flags in __i915_sw_fence_init
v3:
(Tvrtko)
- Remove BUG_ON(!fence->flags) in reinit as that will now blow up
- Only define fence->flags if CONFIG_DRM_I915_SW_FENCE_CHECK_DAG is
defined
v4:
- Rebase, resend for CI
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Alan Previn <alan.previn.teres.alexis@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211116194929.10211-1-matthew.brost@intel.com
This simply adds proper support for panel backlights that can be controlled
via VESA's backlight control protocol, but which also require that we
enable and disable the backlight via PWM instead of via the DPCD interface.
We also enable this by default, in order to fix some people's backlights
that were broken by not having this enabled.
For reference, backlights that require this and use VESA's backlight
interface tend to be laptops with hybrid GPUs, but this very well may
change in the future.
v4:
* Make sure that we call intel_backlight_level_to_pwm() in
intel_dp_aux_vesa_enable_backlight() - vsyrjala
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://gitlab.freedesktop.org/drm/intel/-/issues/3680
Fixes: fe7d52bccab6 ("drm/i915/dp: Don't use DPCD backlights that need PWM enable/disable")
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: <stable@vger.kernel.org> # v5.12+
Link: https://patchwork.freedesktop.org/patch/msgid/20211105183342.130810-2-lyude@redhat.com
(cherry picked from commit 04f0d6cc62cc1eaf9242c081520c024a17ba86a3)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
The drm.mode_config state is not initialized in case of !HAS_DISPLAY
so taking the fb_lock and iterating the fb list won't work on those
platforms. Skip the suspend/resume with an explicit check for this.
Fixes: 9755f055f512 ("drm/i915: Restore memory mapping for DPT FBs across system suspend/resume")
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211125171603.1775179-1-imre.deak@intel.com
Tile4 patch still needs an ack from userspace,
IGT tests and some essential fixes, related to
new .plane_caps attribute being added.
This reverts commit 3c542cfa8266e3364938d055b3d548b7bed7f08e.
Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Acked-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211124092355.16668-1-stanislav.lisovskiy@intel.com
TileF(Tile4 in bspec) format is 4K tile organized into
64B subtiles with same basic shape as for legacy TileY
which will be supported by Display13.
v2: - Fixed wrong case condition(Jani Nikula)
- Increased I915_FORMAT_MOD_F_TILED up to 12(Imre Deak)
v3: - s/I915_TILING_F/TILING_4/g
- s/I915_FORMAT_MOD_F_TILED/I915_FORMAT_MOD_4_TILED/g
- Removed unneeded fencing code
v4: - Rebased, fixed merge conflict with new table-oriented
format modifier checking(Stan)
- Replaced the rest of "Tile F" mentions to "Tile 4"(Stan)
v5: - Still had to remove some Tile F mentionings
- Moved has_4tile from adlp to DG2(Ramalingam C)
- Check specifically for DG2, but not the Display13(Imre)
v6: - Moved Tile4 associating struct for modifier/display to
the beginning(Imre Deak)
- Removed unneeded case I915_FORMAT_MOD_4_TILED modifier
checks(Imre Deak)
- Fixed I915_FORMAT_MOD_4_TILED to be 9 instead of 12
(Imre Deak)
v7: - Fixed display_ver to { 13, 13 }(Imre Deak)
- Removed redundant newline(Imre Deak)
Reviewed-by: Imre Deak <imre.deak@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Juha-Pekka Heikkilä <juha-pekka.heikkila@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211122211420.31584-1-stanislav.lisovskiy@intel.com
UAPI Changes:
* Remove restrictions on DMA_BUF_SET_NAME ioctl
* connector: State of privacy screen
* sysfs: Send hotplug uevent
Cross-subsystem Changes:
* clk/bmc-2835: Fixes
* dma-buf: Add dma_resv selftest; Error-handling fixes; Add debugfs
helpers; Remove dma_resv_get_excl_unlocked(); Documentation fixes
* pwm: Introduce of_pwm_single_xlate()
Core Changes:
* Support for privacy screens
* Make drm_irq.c legacy
* Fix __stack_depot_* name conflict
* Documentation fixes
* Fixes and cleanups
* dp-helper: Reuse 8b/10b link-training delay helpers
* format-helper: Update interfaces
* fb-helper: Allocate shadow buffer of correct size
* gem: Link GEM SHMEM and CMA helpers into separate modules; Use
dma_resv iterator; Import DMA_BUF namespace into GEM-helper modules
* gem/shmem-helper: Interface cleanups
* scheduler: Grab fence in drm_sched_job_add_implicit_dependencies();
Lockdep fixes
* kms-helpers: Link several files from core into the KMS-helper module
Driver Changes:
* Use dma_resv_iter in several places
* Fixes and cleanups
* amdgpu: Use drm_kms_helper_connector_hotplug_event(); Get all fences
at once
* bridge: Switch to managed MIPI DSI helpers in several places; Register
and attach during probe in several places; Convert to YAML in several
places
* bridge/anx7625: Support MIPI DPI input; Support HDMI audio; Fixes
* bridge/dw-hdmi: Allow interlace on bridge
* bridge/ps8640: Enable PM; Support aux-bus
* bridge/tc358768: Enabled reference clock; Support pulse mode;
Modesetting fixes
* bridge/ti-sn65dsi86: Use regmap_bulk_write(); Implement PWM
* etnaviv: Get all fences at once
* gma500: GEM object cleanups; Remove generic drivers in probe function
* i915: Support VESA panel backlights
* ingenic: Fixes and cleanups
* kirin: Adjust probe order
* kmb: Enable framebuffer console
* lima: Kconfig fixes
* meson: Refactoring to supperot DRM_BRIDGE_ATTACH_NO_ENCODER
* msm: Fixes and cleanups
* msm/dsi: Adjust probe order
* omap: Fixes and cleanups
* nouveau: CRC fixes; Validate LUTs in atomic check; Set HDMI AVI RGB
quantization to FULL; Fixes and cleanups
* panel: Support Innolux G070Y2-T02, Vivax TPC-9150, JDI R63452,
Newhaven 1.8-128160EF, Wanchanglong W552964ABA, Novatek NT35950,
BOE BF060Y8M, Sony Tulip Truly NT35521; Use dev_err_probe() throughout
drivers; Fixes and cleanups
* panel/ili9881c: Orientation fixes
* radeon: Use dma_resv_wait_timeout()
* rockchip: Add timeout for DSP hold; Suspend/resume fixes; PLL clock
fixes; Implement mmap in GEM object functions
* simpledrm: Support FB_DAMAGE_CLIPS and virtual screen sizes
* sun4i: Use CMA helpers without vmap support
* tidss: Fixes and cleanups
* v3d: Cleanups
* vc4: Fix HDMI-CEC hang when display is off; Power on HDMI controller
while disabling; Support 4k@60 Hz modes; Fixes and cleanups
* video: Convert to sysfs_emit() in several places
* video/omapfb: Fix fall-through
* virtio: Overflow fixes
* xen: Implement mmap as GEM object functions
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEchf7rIzpz2NEoWjlaA3BHVMLeiMFAmGWF0wACgkQaA3BHVML
eiN55ggAr6QN7S7Uxu98XnqfAHC9RErY7r3PoTXXS6ODvxY41bWOpHk8TQzuw626
JCNnpQCk6Gi8L3yl8r/l1fqoirGXrfDR1YvrnmG4I9xhPxOqBmgxDWw7HQrROm2B
FctOvgFukvzn5jzQk2FqYgs5JBV20WqLrfEhttPFFMvjLGti/U31/+d+aGMJdRIQ
kE2eVpPZtAlbBAP+S4mglKp6w+WrrzNHHULSGOPcGS5jwLrNFaQg7w75JiLInzyR
RWum28USXSkKE0d6XBqHw+PWAwo3B/Vq9XSnbCX4+3GQX4tJh+hosyU7ju+rA0BY
FJCyN/YgZvc+474o/LVtMh7PbKMEHQ==
=TV6Q
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-next-2021-11-18' of git://anongit.freedesktop.org/drm/drm-misc into drm-next
drm-misc-next for 5.17:
UAPI Changes:
* Remove restrictions on DMA_BUF_SET_NAME ioctl
* connector: State of privacy screen
* sysfs: Send hotplug uevent
Cross-subsystem Changes:
* clk/bmc-2835: Fixes
* dma-buf: Add dma_resv selftest; Error-handling fixes; Add debugfs
helpers; Remove dma_resv_get_excl_unlocked(); Documentation fixes
* pwm: Introduce of_pwm_single_xlate()
Core Changes:
* Support for privacy screens
* Make drm_irq.c legacy
* Fix __stack_depot_* name conflict
* Documentation fixes
* Fixes and cleanups
* dp-helper: Reuse 8b/10b link-training delay helpers
* format-helper: Update interfaces
* fb-helper: Allocate shadow buffer of correct size
* gem: Link GEM SHMEM and CMA helpers into separate modules; Use
dma_resv iterator; Import DMA_BUF namespace into GEM-helper modules
* gem/shmem-helper: Interface cleanups
* scheduler: Grab fence in drm_sched_job_add_implicit_dependencies();
Lockdep fixes
* kms-helpers: Link several files from core into the KMS-helper module
Driver Changes:
* Use dma_resv_iter in several places
* Fixes and cleanups
* amdgpu: Use drm_kms_helper_connector_hotplug_event(); Get all fences
at once
* bridge: Switch to managed MIPI DSI helpers in several places; Register
and attach during probe in several places; Convert to YAML in several
places
* bridge/anx7625: Support MIPI DPI input; Support HDMI audio; Fixes
* bridge/dw-hdmi: Allow interlace on bridge
* bridge/ps8640: Enable PM; Support aux-bus
* bridge/tc358768: Enabled reference clock; Support pulse mode;
Modesetting fixes
* bridge/ti-sn65dsi86: Use regmap_bulk_write(); Implement PWM
* etnaviv: Get all fences at once
* gma500: GEM object cleanups; Remove generic drivers in probe function
* i915: Support VESA panel backlights
* ingenic: Fixes and cleanups
* kirin: Adjust probe order
* kmb: Enable framebuffer console
* lima: Kconfig fixes
* meson: Refactoring to supperot DRM_BRIDGE_ATTACH_NO_ENCODER
* msm: Fixes and cleanups
* msm/dsi: Adjust probe order
* omap: Fixes and cleanups
* nouveau: CRC fixes; Validate LUTs in atomic check; Set HDMI AVI RGB
quantization to FULL; Fixes and cleanups
* panel: Support Innolux G070Y2-T02, Vivax TPC-9150, JDI R63452,
Newhaven 1.8-128160EF, Wanchanglong W552964ABA, Novatek NT35950,
BOE BF060Y8M, Sony Tulip Truly NT35521; Use dev_err_probe() throughout
drivers; Fixes and cleanups
* panel/ili9881c: Orientation fixes
* radeon: Use dma_resv_wait_timeout()
* rockchip: Add timeout for DSP hold; Suspend/resume fixes; PLL clock
fixes; Implement mmap in GEM object functions
* simpledrm: Support FB_DAMAGE_CLIPS and virtual screen sizes
* sun4i: Use CMA helpers without vmap support
* tidss: Fixes and cleanups
* v3d: Cleanups
* vc4: Fix HDMI-CEC hang when display is off; Power on HDMI controller
while disabling; Support 4k@60 Hz modes; Fixes and cleanups
* video: Convert to sysfs_emit() in several places
* video/omapfb: Fix fall-through
* virtio: Overflow fixes
* xen: Implement mmap as GEM object functions
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/YZYZSypIrr+qcih3@linux-uq9g.fritz.box
Anything internal to the implementation should be hidden away. Move the
intel_display_power structs to the .c file.
Cc: Imre Deak <imre.deak@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211116171434.20516-4-jani.nikula@intel.com
The debugfs should have no special privileges to look into the
implementation guts. Move the actual debug printing of power domains to
intel_display_power.c.
Cc: Imre Deak <imre.deak@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211116171434.20516-3-jani.nikula@intel.com
Since I originally wrote these comments we decided to change our
definition of framestart_delay from 0-3 to 1-4. Adjust the comments
to match that new convention. The actual code was adjusted already.
Cc: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211117183103.27418-3-ville.syrjala@linux.intel.com
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Let's adjust the vblank evasion to account for the case where
a push has already been sent. In that case the vblank exit will start
at vmin vblank start (as opposed to vmax vblank start when no push
has been sent).
This should minimize the effects of the tiny race between sampling
the frame counter vs. intel_vrr_send_push() during the previous frame.
This will also be required if we want to do mailbox style updates with
vrr since then we'd definitely do multiple commits per frame. Currently
mailbox updates are only used by the legacy cursor, but we don't do
vrr push for those.
Cc: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211117183103.27418-2-ville.syrjala@linux.intel.com
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Moving the vrr push to happen before sampling the frame counter
was wrong. If we are already in vblank when the push is sent
the vblank exit will start immediately which causes the sampled
frame counter to correspond to the next frame instead of the current
frame.
So put things back into the original order (except we should
keep the vrr push within the irq disable section to avoid
pointless irq related delays here).
We'll just have to accept the tiny race that exists between
sampling the frame counter vs. vrr push. And let's at least
document said race properly in a comment.
I suppose we could try to minimize the race by sampling the frame
counter just before sending the push, but that would require
changing drm_crtc_arm_vblank_event() to accept a caller provided
vblank counter value, so leave it be for now. Another thing we
could do is change the vblank evasion to account for the case
where a push was already sent. That would anyway be required
for mailbox style updates. Currently mailbox updates are only
used by the legacy cursor, but we don't do a vrr push for those.
Cc: Manasi Navare <manasi.d.navare@intel.com>
Fixes: 6f9976bd1310 ("drm/i915: Do vrr push before sampling the frame counter")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211117183103.27418-1-ville.syrjala@linux.intel.com
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
In intel_dsi_get_config() double the pclk returned by foo_dsi_get_pclk()
for dual-link panels. This fixes the following WARN triggering:
i915 0000:00:02.0: [drm] *ERROR* [CRTC:51:pipe A] mismatch in pixel_rate (expected 235710, found 118056)
i915 0000:00:02.0: [drm] *ERROR* [CRTC:51:pipe A] mismatch in hw.pipe_mode.crtc_clock (expected 235710, found 118056)
i915 0000:00:02.0: [drm] *ERROR* [CRTC:51:pipe A] mismatch in hw.adjusted_mode.crtc_clock (expected 235710, found 118056)
i915 0000:00:02.0: [drm] *ERROR* [CRTC:51:pipe A] mismatch in port_clock (expected 235710, found 118056)
------------[ cut here ]------------
pipe state doesn't match!
WARNING: CPU: 3 PID: 136 at drivers/gpu/drm/i915/display/intel_display.c:9125 intel_display_finish_reset+0x1bd3/0x2050 [i915]
...
This has been tested on a Xiaomi Mi Pad 2 (with CHT x5-Z8500 SoC) tablet,
with a 1536x2048 dual-link DSI panel.
Note this fix was taken from icl_dsi.c which does the same in
its get_config().
Cc: Tsuchiya Yuto <kitakar@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211024155020.126328-1-hdegoede@redhat.com
Hooray! We've managed to hit enough bugs upstream that I've been able to
come up with a pretty solid explanation for how backlight controls are
actually supposed to be detected and used these days. As well, having the
rest of the PWM bits in VESA's backlight interface implemented seems to
have fixed all of the problematic brightness controls laptop panels that
we've hit so far.
So, let's actually document this instead of just calling the laptop panels
liars. As well, I would like to formally apologize to all of the laptop
panels I called liars. I'm sorry laptop panels, hopefully you can all
forgive me and we can move past this~
Signed-off-by: Lyude Paul <lyude@redhat.com>
Acked-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211105183342.130810-6-lyude@redhat.com
Now that we've added support to i915 for controlling panel backlights that
need PWM to be enabled/disabled, let's finalize this and add support for
controlling brightness levels via PWM as well. This should hopefully put us
towards the path of supporting _ALL_ backlights via VESA's DPCD interface
which would allow us to finally start trusting the DPCD again.
Note however that we still don't enable using this by default on i915 when
it's not needed, primarily because I haven't yet had a chance to confirm if
it's safe to do this on the one machine in Intel's CI that had an issue
with this: samus-fi-bdw. I have done basic testing of this on other
machines though, by manually patching i915 to force it into PWM-only mode
on some of my laptops.
v2:
* Correct documentation (thanks Doug!)
* Get rid of backlight caps
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Doug Anderson <dianders@chromium.org>
Cc: Rajeev Nandan <rajeevny@codeaurora.org>
Cc: Satadru Pramanik <satadru@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211105183342.130810-5-lyude@redhat.com
This simply adds proper support for panel backlights that can be controlled
via VESA's backlight control protocol, but which also require that we
enable and disable the backlight via PWM instead of via the DPCD interface.
We also enable this by default, in order to fix some people's backlights
that were broken by not having this enabled.
For reference, backlights that require this and use VESA's backlight
interface tend to be laptops with hybrid GPUs, but this very well may
change in the future.
v4:
* Make sure that we call intel_backlight_level_to_pwm() in
intel_dp_aux_vesa_enable_backlight() - vsyrjala
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://gitlab.freedesktop.org/drm/intel/-/issues/3680
Fixes: fe7d52bccab6 ("drm/i915/dp: Don't use DPCD backlights that need PWM enable/disable")
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: <stable@vger.kernel.org> # v5.12+
Link: https://patchwork.freedesktop.org/patch/msgid/20211105183342.130810-2-lyude@redhat.com
After a non-blocking modeset on a TypeC port's CRTC - possibly blocked
later in drm_atomic_helper_wait_for_dependencies() - a fastset on the
same CRTC may copy the state of CRTC before this gets updated to reflect
the up-to-date DP-alt vs. TBT-alt TypeC mode DPLL used for the CRTC. In
this case after the first (non-blocking) commit completes enabling the
DPLL required for the up-to-date TypeC mode the following fastset will
update the CRTC state pointing to the wrong DPLL. A subsequent disabling
modeset will try to disable the wrong PLL, triggering a state checker
WARN (and leaving the DPLL which is actually used active for good).
Fix the above race by copying the DPLL state for fastset CRTCs from the
old CRTC state at the point where it's guaranteed to be up-to-date
already. This could be handled in the encoder's update_prepare() hook as
well, but that's a bigger change, which is better done as a follow-up.
v2: Copy dpll_hw_state as well. (Ville)
Testcase: igt/kms_busy/extended-modeset-hang-newfb-with-reset
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/4308
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211115181121.156197-1-imre.deak@intel.com
v2: Fix the typo, move out the hardcoding from
macro(Jani, Ville)
Fixes: f87c46c43175 ("drm/i915/dsi/xelpd: Add WA to program LP to HS wakeup guardband")
Signed-off-by: Vandita Kulkarni <vandita.kulkarni@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211019151435.20477-2-vandita.kulkarni@intel.com
(cherry picked from commit 6f07707fa09e1dc58c431d57c25ef2e68b9bec47)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
