IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
- Add __counted_by to struct clk_hw_onecell_data and struct spmi_pmic_div_clk_cc
- Remove non-OF mmp clk drivers
- Move number of clks from DT headers to drivers
* clk-imx:
clk: imx: pll14xx: dynamically configure PLL for 393216000/361267200Hz
clk: imx: pll14xx: align pdiv with reference manual
clk: imx: composite-8m: fix clock pauses when set_rate would be a no-op
clk: imx25: make __mx25_clocks_init return void
clk: imx25: print silicon revision during init
dt-bindings: clocks: imx8mp: make sai4 a dummy clock
clk: imx8mp: fix sai4 clock
clk: imx: imx8ulp: update SPLL2 type
clk: imx: pllv4: Fix SPLL2 MULT range
clk: imx: imx8: add audio clock mux driver
dt-bindings: clock: fsl,imx8-acm: Add audio clock mux support
clk: imx: clk-imx8qxp-lpcg: Convert to devm_platform_ioremap_resource()
clk: imx: clk-gpr-mux: Simplify .determine_rate()
clk: imx: Add 519.75MHz frequency support for imx9 pll
clk: imx93: Add PDM IPG clk
dt-bindings: clock: imx93: Add PDM IPG clk
* clk-samsung:
dt-bindings: clock: samsung: remove define with number of clocks
clk: samsung: exynoautov9: do not define number of clocks in bindings
clk: samsung: exynos850: do not define number of clocks in bindings
clk: samsung: exynos7885: do not define number of clocks in bindings
clk: samsung: exynos5433: do not define number of clocks in bindings
clk: samsung: exynos5420: do not define number of clocks in bindings
clk: samsung: exynos5410: do not define number of clocks in bindings
clk: samsung: exynos5260: do not define number of clocks in bindings
clk: samsung: exynos5250: do not define number of clocks in bindings
clk: samsung: exynos4: do not define number of clocks in bindings
clk: samsung: exynos3250: do not define number of clocks in bindings
* clk-annotate:
clk: qcom: clk-spmi-pmic-div: Annotate struct spmi_pmic_div_clk_cc with __counted_by
clk: Annotate struct clk_hw_onecell_data with __counted_by
* clk-marvell:
clk: pxa910: Move number of clocks to driver source
clk: pxa1928: Move number of clocks to driver source
clk: pxa168: Move number of clocks to driver source
clk: mmp2: Move number of clocks to driver source
clk: mmp: Remove old non-OF clock drivers
* clk-lmk:
clk: lmk04832: Support using PLL1_LD as SPI readback pin
clk: lmk04832: Don't disable vco clock on probe fail
clk: lmk04832: Set missing parent_names for output clocks
- Add Versa3 clk generator to support 48KHz playback/record with audio
codec on RZ/G2L SMARC EVK
- Introduce kstrdup_and_replace() and use it
* clk-versa:
clk: vc7: Use i2c_get_match_data() instead of device_get_match_data()
clk: vc5: Use i2c_get_match_data() instead of device_get_match_data()
clk: versaclock3: Switch to use i2c_driver's probe callback
clk: Add support for versa3 clock driver
dt-bindings: clock: Add Renesas versa3 clock generator bindings
* clk-strdup:
clk: ti: Replace kstrdup() + strreplace() with kstrdup_and_replace()
clk: tegra: Replace kstrdup() + strreplace() with kstrdup_and_replace()
driver core: Replace kstrdup() + strreplace() with kstrdup_and_replace()
lib/string_helpers: Add kstrdup_and_replace() helper
* clk-amlogic: (22 commits)
dt-bindings: soc: amlogic: document System Control registers
dt-bindings: clock: amlogic: convert amlogic,gxbb-aoclkc.txt to dt-schema
dt-bindings: clock: amlogic: convert amlogic,gxbb-clkc.txt to dt-schema
clk: meson: axg-audio: move bindings include to main driver
clk: meson: meson8b: move bindings include to main driver
clk: meson: a1: move bindings include to main driver
clk: meson: eeclk: move bindings include to main driver
clk: meson: aoclk: move bindings include to main driver
dt-bindings: clk: axg-audio-clkc: expose all clock ids
dt-bindings: clk: amlogic,a1-pll-clkc: expose all clock ids
dt-bindings: clk: amlogic,a1-peripherals-clkc: expose all clock ids
dt-bindings: clk: meson8b-clkc: expose all clock ids
dt-bindings: clk: g12a-aoclkc: expose all clock ids
dt-bindings: clk: g12a-clks: expose all clock ids
dt-bindings: clk: axg-clkc: expose all clock ids
dt-bindings: clk: gxbb-clkc: expose all clock ids
clk: meson: migrate axg-audio out of hw_onecell_data to drop NR_CLKS
clk: meson: migrate meson8b out of hw_onecell_data to drop NR_CLKS
clk: meson: migrate a1 clock drivers out of hw_onecell_data to drop NR_CLKS
clk: meson: migrate meson-aoclk out of hw_onecell_data to drop NR_CLKS
...
* clk-allwinner:
clk: sunxi-ng: nkm: Prefer current parent rate
clk: sunxi-ng: a64: select closest rate for pll-video0
clk: sunxi-ng: div: Support finding closest rate
clk: sunxi-ng: mux: Support finding closest rate
clk: sunxi-ng: nkm: Support finding closest rate
clk: sunxi-ng: nm: Support finding closest rate
clk: sunxi-ng: Add helper function to find closest rate
clk: sunxi-ng: Add feature to find closest rate
clk: sunxi-ng: a64: allow pll-mipi to set parent's rate
clk: sunxi-ng: nkm: consider alternative parent rates when determining rate
clk: sunxi-ng: nkm: Use correct parameter name for parent HW
clk: sunxi-ng: Modify mismatched function name
clk: sunxi: sun9i-mmc: Use devm_platform_get_and_ioremap_resource()
* clk-rockchip:
clk: rockchip: rv1126: Add PD_VO clock tree
clk: rockchip: rk3568: Fix PLL rate setting for 78.75MHz
clk: rockchip: rk3568: Add PLL rate for 101MHz
We've received a fairly wide range of changes at this time, including
for ALSA and ASoC core, but all of them are rather small changes.
Here are some highlights:
ALSA / ASoC Core:
- Fixes of inconsistent locking around control API helpers
- A few new control API functions and cleanups
- Workarounds for potential UAFs by delayed kobj releases
- Unified PCM copy ops with iov_iter
- Continued efforts for ASoC API cleanups
ASoC:
- An adaptor to allow use of IIO DACs and ADCs in ASoC which pulls in
some IIO changes
- Create a library function for intlog10() and use it in the NAU8825
driver
- Convert drivers to use the more modern maple tree register cache
- Lots of work on the SOF framework, AMD and Intel drivers, including a
lot of cleanup and new device support
- Standardization of the presentation of jacks from drivers
- Provision of some generic sound card DT properties
- Support for AMD Van Gogh, AMD machines with MAX98388 and NAU8821,
AWInic AW88261, Cirrus Logic CS35L36 and CS42L43, various Intel
platforms including AVS machines with ES8336 and RT5663, Mediatek
MT7986, NXP i.MX93, RealTek RT1017 and StarFive JH7110
Others:
- New test coverage including ASoC and topology tests in KUnit;
this also involves enabling UML builds of ALSA since that's the
default KUnit test environment which pulls in the addition of some
stubs to the driver
- More enhancement of pcmtest driver
- A few fixes / enhancements of MIDI 2.0 UMP core
- Using PCI definitions in allover HD-audio code
- Support for Cirrus CS35L56 and TI TAS2781 HD-audio sub-codecs
- CS35L41 HD-audio sub-codec improvements
- Continued emu10k1 improvements
-----BEGIN PGP SIGNATURE-----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=Rr0i
-----END PGP SIGNATURE-----
Merge tag 'sound-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound updates from Takashi Iwai:
"We've received a fairly wide range of changes at this time, including
for ALSA and ASoC core, but all of them are rather small changes.
Here are some highlights:
ALSA / ASoC Core:
- Fixes of inconsistent locking around control API helpers
- A few new control API functions and cleanups
- Workarounds for potential UAFs by delayed kobj releases
- Unified PCM copy ops with iov_iter
- Continued efforts for ASoC API cleanups
ASoC:
- An adaptor to allow use of IIO DACs and ADCs in ASoC which pulls in
some IIO changes
- Create a library function for intlog10() and use it in the NAU8825
driver
- Convert drivers to use the more modern maple tree register cache
- Lots of work on the SOF framework, AMD and Intel drivers, including
a lot of cleanup and new device support
- Standardization of the presentation of jacks from drivers
- Provision of some generic sound card DT properties
- Support for AMD Van Gogh, AMD machines with MAX98388 and NAU8821,
AWInic AW88261, Cirrus Logic CS35L36 and CS42L43, various Intel
platforms including AVS machines with ES8336 and RT5663, Mediatek
MT7986, NXP i.MX93, RealTek RT1017 and StarFive JH7110
Others:
- New test coverage including ASoC and topology tests in KUnit; this
also involves enabling UML builds of ALSA since that's the default
KUnit test environment which pulls in the addition of some stubs to
the driver
- More enhancement of pcmtest driver
- A few fixes / enhancements of MIDI 2.0 UMP core
- Using PCI definitions in allover HD-audio code
- Support for Cirrus CS35L56 and TI TAS2781 HD-audio sub-codecs
- CS35L41 HD-audio sub-codec improvements
- Continued emu10k1 improvements"
* tag 'sound-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (693 commits)
ALSA: pcm: Fix missing fixup call in compat hw_refine ioctl
ASoC: dwc: i2s: Fix unused functions
ALSA: usb-audio: Don't try to submit URBs after disconnection
ALSA: emu10k1: add separate documentation for E-MU cards
ALSA: emu10k1: more documentation updates
ALSA: emu10k1: de-duplicate audigy-mixer.rst vs. sb-live-mixer.rst
ALSA: ump: Fix -Wformat-truncation warnings
ALSA: hda: Add missing dependency on CONFIG_EFI for Cirrus/TI sub-codecs
ALSA: doc: Fix missing backquote in midi-2.0.rst
ALSA: hda/realtek: Add quirk for mute LEDs on HP ENVY x360 15-eu0xxx
ALSA: hda/tas2781: Switch back to use struct i2c_driver's .probe()
ASoC: soc-core.c: Do not error if a DAI link component is not found
ASoC: codecs: Fix error code in aw88261_i2c_probe()
ASoC: audio-graph-card.c: move audio_graph_parse_of()
ASoC: cs42l43: Use new-style PM runtime macros
ALSA: documentation: Add description for USB MIDI 2.0 gadget driver
ALSA: ump: Don't create unused substreams for static blocks
ALSA: ump: Fill group names for legacy rawmidi substreams
ALSA: usb-audio: Attach legacy rawmidi after probing all UMP EPs
ALSA: ac97: Fix possible error value of *rac97
...
core:
- fix gfp flags in drmm_kmalloc
gpuva:
- add new generic GPU VA manager (for nouveau initially)
syncobj:
- add new DRM_IOCTL_SYNCOBJ_EVENTFD ioctl
dma-buf:
- acquire resv lock for mmap() in exporters
- support dma-buf self import automatically
- docs fixes
backlight:
- fix fbdev interactions
atomic:
- improve logging
prime:
- remove struct gem_prim_mmap plus driver updates
gem:
- drm_exec: add locking over multiple GEM objects
- fix lockdep checking
fbdev:
- make fbdev userspace interfaces optional
- use linux device instead of fbdev device
- use deferred i/o helper macros in various drivers
- Make FB core selectable without drivers
- Remove obsolete flags FBINFO_DEFAULT and FBINFO_FLAG_DEFAULT
- Add helper macros and Kconfig tokens for DMA-allocated framebuffer
ttm:
- support init_on_free
- swapout fixes
panel:
- panel-edp: Support AUO B116XAB01.4
- Support Visionox R66451 plus DT bindings
- ld9040: Backlight support, magic improved,
Kconfig fix
- Convert to of_device_get_match_data()
- Fix Kconfig dependencies
- simple: Set bpc value to fix warning; Set connector type for AUO T215HVN01;
Support Innolux G156HCE-L01 plus DT bindings
- ili9881: Support TDO TL050HDV35 LCD panel plus DT bindings
- startek: Support KD070FHFID015 MIPI-DSI panel plus DT bindings
- sitronix-st7789v: Support Inanbo T28CP45TN89 plus DT bindings;
Support EDT ET028013DMA plus DT bindings; Various cleanups
- edp: Add timings for N140HCA-EAC
- Allow panels and touchscreens to power sequence together
- Fix Innolux G156HCE-L01 LVDS clock
bridge:
- debugfs for chains support
- dw-hdmi: Improve support for YUV420 bus format
CEC suspend/resume, update EDID on HDMI detect
- dw-mipi-dsi: Fix enable/disable of DSI controller
- lt9611uxc: Use MODULE_FIRMWARE()
- ps8640: Remove broken EDID code
- samsung-dsim: Fix command transfer
- tc358764: Handle HS/VS polarity; Use BIT() macro; Various cleanups
- adv7511: Fix low refresh rate
- anx7625: Switch to macros instead of hardcoded values
locking fixes
- tc358767: fix hardware delays
- sitronix-st7789v: Support panel orientation; Support rotation
property; Add support for Jasonic
JT240MHQS-HWT-EK-E3 plus DT bindings
amdgpu:
- SDMA 6.1.0 support
- HDP 6.1 support
- SMUIO 14.0 support
- PSP 14.0 support
- IH 6.1 support
- Lots of checkpatch cleanups
- GFX 9.4.3 updates
- Add USB PD and IFWI flashing documentation
- GPUVM updates
- RAS fixes
- DRR fixes
- FAMS fixes
- Virtual display fixes
- Soft IH fixes
- SMU13 fixes
- Rework PSP firmware loading for other IPs
- Kernel doc fixes
- DCN 3.0.1 fixes
- LTTPR fixes
- DP MST fixes
- DCN 3.1.6 fixes
- SMU 13.x fixes
- PSP 13.x fixes
- SubVP fixes
- GC 9.4.3 fixes
- Display bandwidth calculation fixes
- VCN4 secure submission fixes
- Allow building DC on RISC-V
- Add visible FB info to bo_print_info
- HBR3 fixes
- GFX9 MCBP fix
- GMC10 vmhub index fix
- GMC11 vmhub index fix
- Create a new doorbell manager
- SR-IOV fixes
- initial freesync panel replay support
- revert zpos properly until igt regression is fixeed
- use TTM to manage doorbell BAR
- Expose both current and average power via hwmon if supported
amdkfd:
- Cleanup CRIU dma-buf handling
- Use KIQ to unmap HIQ
- GFX 9.4.3 debugger updates
- GFX 9.4.2 debugger fixes
- Enable cooperative groups fof gfx11
- SVM fixes
- Convert older APUs to use dGPU path like newer APUs
- Drop IOMMUv2 path as it is no longer used
- TBA fix for aldebaran
i915:
- ICL+ DSI modeset sequence
- HDCP improvements
- MTL display fixes and cleanups
- HSW/BDW PSR1 restored
- Init DDI ports in VBT order
- General display refactors
- Start using plane scale factor for relative data rate
- Use shmem for dpt objects
- Expose RPS thresholds in sysfs
- Apply GuC SLPC min frequency softlimit correctly
- Extend Wa_14015795083 to TGL, RKL, DG1 and ADL
- Fix a VMA UAF for multi-gt platform
- Do not use stolen on MTL due to HW bug
- Check HuC and GuC version compatibility on MTL
- avoid infinite GPU waits due to premature release
of request memory
- Fixes and updates for GSC memory allocation
- Display SDVO fixes
- Take stolen handling out of FBC code
- Make i915_coherent_map_type GT-centric
- Simplify shmem_create_from_object map_type
msm:
- SM6125 MDSS support
- DPU: SM6125 DPU support
- DSI: runtime PM support, burst mode support
- DSI PHY: SM6125 support in 14nm DSI PHY driver
- GPU: prepare for a7xx
- fix a690 firmware
- disable relocs on a6xx and newer
radeon:
- Lots of checkpatch cleanups
ast:
- improve device-model detection
- Represent BMV as virtual connector
- Report DP connection status
nouveau:
- add new exec/bind interface to support Vulkan
- document some getparam ioctls
- improve VRAM detection
- various fixes/cleanups
- workraound DPCD issues
ivpu:
- MMU updates
- debugfs support
- Support vpu4
virtio:
- add sync object support
atmel-hlcdc:
- Support inverted pixclock polarity
etnaviv:
- runtime PM cleanups
- hang handling fixes
exynos:
- use fbdev DMA helpers
- fix possible NULL ptr dereference
komeda:
- always attach encoder
omapdrm:
- use fbdev DMA helpers
ingenic:
- kconfig regmap fixes
loongson:
- support display controller
mediatek:
- Small mtk-dpi cleanups
- DisplayPort: support eDP and aux-bus
- Fix coverity issues
- Fix potential memory leak if vmap() fail
mgag200:
- minor fixes
mxsfb:
- support disabling overlay planes
panfrost:
- fix sync in IRQ handling
ssd130x:
- Support per-controller default resolution plus DT bindings
- Reduce memory-allocation overhead
- Improve intermediate buffer size computation
- Fix allocation of temporary buffers
- Fix pitch computation
- Fix shadow plane allocation
tegra:
- use fbdev DMA helpers
- Convert to devm_platform_ioremap_resource()
- support bridge/connector
- enable PM
tidss:
- Support TI AM625 plus DT bindings
- Implement new connector model plus driver updates
vkms:
- improve write back support
- docs fixes
- support gamma LUT
zynqmp-dpsub:
- misc fixes
-----BEGIN PGP SIGNATURE-----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=CwV9
-----END PGP SIGNATURE-----
Merge tag 'drm-next-2023-08-30' of git://anongit.freedesktop.org/drm/drm
Pull drm updates from Dave Airlie:
"The drm core grew a new generic gpu virtual address manager, and new
execution locking helpers. These are used by nouveau now to provide
uAPI support for the userspace Vulkan driver. AMD had a bunch of new
IP core support, loads of refactoring around fbdev, but mostly just
the usual amount of stuff across the board.
core:
- fix gfp flags in drmm_kmalloc
gpuva:
- add new generic GPU VA manager (for nouveau initially)
syncobj:
- add new DRM_IOCTL_SYNCOBJ_EVENTFD ioctl
dma-buf:
- acquire resv lock for mmap() in exporters
- support dma-buf self import automatically
- docs fixes
backlight:
- fix fbdev interactions
atomic:
- improve logging
prime:
- remove struct gem_prim_mmap plus driver updates
gem:
- drm_exec: add locking over multiple GEM objects
- fix lockdep checking
fbdev:
- make fbdev userspace interfaces optional
- use linux device instead of fbdev device
- use deferred i/o helper macros in various drivers
- Make FB core selectable without drivers
- Remove obsolete flags FBINFO_DEFAULT and FBINFO_FLAG_DEFAULT
- Add helper macros and Kconfig tokens for DMA-allocated framebuffer
ttm:
- support init_on_free
- swapout fixes
panel:
- panel-edp: Support AUO B116XAB01.4
- Support Visionox R66451 plus DT bindings
- ld9040:
- Backlight support
- magic improved
- Kconfig fix
- Convert to of_device_get_match_data()
- Fix Kconfig dependencies
- simple:
- Set bpc value to fix warning
- Set connector type for AUO T215HVN01
- Support Innolux G156HCE-L01 plus DT bindings
- ili9881: Support TDO TL050HDV35 LCD panel plus DT bindings
- startek: Support KD070FHFID015 MIPI-DSI panel plus DT bindings
- sitronix-st7789v:
- Support Inanbo T28CP45TN89 plus DT bindings
- Support EDT ET028013DMA plus DT bindings
- Various cleanups
- edp: Add timings for N140HCA-EAC
- Allow panels and touchscreens to power sequence together
- Fix Innolux G156HCE-L01 LVDS clock
bridge:
- debugfs for chains support
- dw-hdmi:
- Improve support for YUV420 bus format
- CEC suspend/resume
- update EDID on HDMI detect
- dw-mipi-dsi: Fix enable/disable of DSI controller
- lt9611uxc: Use MODULE_FIRMWARE()
- ps8640: Remove broken EDID code
- samsung-dsim: Fix command transfer
- tc358764:
- Handle HS/VS polarity
- Use BIT() macro
- Various cleanups
- adv7511: Fix low refresh rate
- anx7625:
- Switch to macros instead of hardcoded values
- locking fixes
- tc358767: fix hardware delays
- sitronix-st7789v:
- Support panel orientation
- Support rotation property
- Add support for Jasonic JT240MHQS-HWT-EK-E3 plus DT bindings
amdgpu:
- SDMA 6.1.0 support
- HDP 6.1 support
- SMUIO 14.0 support
- PSP 14.0 support
- IH 6.1 support
- Lots of checkpatch cleanups
- GFX 9.4.3 updates
- Add USB PD and IFWI flashing documentation
- GPUVM updates
- RAS fixes
- DRR fixes
- FAMS fixes
- Virtual display fixes
- Soft IH fixes
- SMU13 fixes
- Rework PSP firmware loading for other IPs
- Kernel doc fixes
- DCN 3.0.1 fixes
- LTTPR fixes
- DP MST fixes
- DCN 3.1.6 fixes
- SMU 13.x fixes
- PSP 13.x fixes
- SubVP fixes
- GC 9.4.3 fixes
- Display bandwidth calculation fixes
- VCN4 secure submission fixes
- Allow building DC on RISC-V
- Add visible FB info to bo_print_info
- HBR3 fixes
- GFX9 MCBP fix
- GMC10 vmhub index fix
- GMC11 vmhub index fix
- Create a new doorbell manager
- SR-IOV fixes
- initial freesync panel replay support
- revert zpos properly until igt regression is fixeed
- use TTM to manage doorbell BAR
- Expose both current and average power via hwmon if supported
amdkfd:
- Cleanup CRIU dma-buf handling
- Use KIQ to unmap HIQ
- GFX 9.4.3 debugger updates
- GFX 9.4.2 debugger fixes
- Enable cooperative groups fof gfx11
- SVM fixes
- Convert older APUs to use dGPU path like newer APUs
- Drop IOMMUv2 path as it is no longer used
- TBA fix for aldebaran
i915:
- ICL+ DSI modeset sequence
- HDCP improvements
- MTL display fixes and cleanups
- HSW/BDW PSR1 restored
- Init DDI ports in VBT order
- General display refactors
- Start using plane scale factor for relative data rate
- Use shmem for dpt objects
- Expose RPS thresholds in sysfs
- Apply GuC SLPC min frequency softlimit correctly
- Extend Wa_14015795083 to TGL, RKL, DG1 and ADL
- Fix a VMA UAF for multi-gt platform
- Do not use stolen on MTL due to HW bug
- Check HuC and GuC version compatibility on MTL
- avoid infinite GPU waits due to premature release of request memory
- Fixes and updates for GSC memory allocation
- Display SDVO fixes
- Take stolen handling out of FBC code
- Make i915_coherent_map_type GT-centric
- Simplify shmem_create_from_object map_type
msm:
- SM6125 MDSS support
- DPU: SM6125 DPU support
- DSI: runtime PM support, burst mode support
- DSI PHY: SM6125 support in 14nm DSI PHY driver
- GPU: prepare for a7xx
- fix a690 firmware
- disable relocs on a6xx and newer
radeon:
- Lots of checkpatch cleanups
ast:
- improve device-model detection
- Represent BMV as virtual connector
- Report DP connection status
nouveau:
- add new exec/bind interface to support Vulkan
- document some getparam ioctls
- improve VRAM detection
- various fixes/cleanups
- workraound DPCD issues
ivpu:
- MMU updates
- debugfs support
- Support vpu4
virtio:
- add sync object support
atmel-hlcdc:
- Support inverted pixclock polarity
etnaviv:
- runtime PM cleanups
- hang handling fixes
exynos:
- use fbdev DMA helpers
- fix possible NULL ptr dereference
komeda:
- always attach encoder
omapdrm:
- use fbdev DMA helpers
ingenic:
- kconfig regmap fixes
loongson:
- support display controller
mediatek:
- Small mtk-dpi cleanups
- DisplayPort: support eDP and aux-bus
- Fix coverity issues
- Fix potential memory leak if vmap() fail
mgag200:
- minor fixes
mxsfb:
- support disabling overlay planes
panfrost:
- fix sync in IRQ handling
ssd130x:
- Support per-controller default resolution plus DT bindings
- Reduce memory-allocation overhead
- Improve intermediate buffer size computation
- Fix allocation of temporary buffers
- Fix pitch computation
- Fix shadow plane allocation
tegra:
- use fbdev DMA helpers
- Convert to devm_platform_ioremap_resource()
- support bridge/connector
- enable PM
tidss:
- Support TI AM625 plus DT bindings
- Implement new connector model plus driver updates
vkms:
- improve write back support
- docs fixes
- support gamma LUT
zynqmp-dpsub:
- misc fixes"
* tag 'drm-next-2023-08-30' of git://anongit.freedesktop.org/drm/drm: (1327 commits)
drm/gpuva_mgr: remove unused prev pointer in __drm_gpuva_sm_map()
drm/tests/drm_kunit_helpers: Place correct function name in the comment header
drm/nouveau: uapi: don't pass NO_PREFETCH flag implicitly
drm/nouveau: uvmm: fix unset region pointer on remap
drm/nouveau: sched: avoid job races between entities
drm/i915: Fix HPD polling, reenabling the output poll work as needed
drm: Add an HPD poll helper to reschedule the poll work
drm/i915: Fix TLB-Invalidation seqno store
drm/ttm/tests: Fix type conversion in ttm_pool_test
drm/msm/a6xx: Bail out early if setting GPU OOB fails
drm/msm/a6xx: Move LLC accessors to the common header
drm/msm/a6xx: Introduce a6xx_llc_read
drm/ttm/tests: Require MMU when testing
drm/panel: simple: Fix Innolux G156HCE-L01 LVDS clock
Revert "Revert "drm/amdgpu/display: change pipe policy for DCN 2.0""
drm/amdgpu: Add memory vendor information
drm/amd: flush any delayed gfxoff on suspend entry
drm/amdgpu: skip fence GFX interrupts disable/enable for S0ix
drm/amdgpu: Remove gfxoff check in GFX v9.4.3
drm/amd/pm: Update pci link speed for smu v13.0.6
...
Core
----
- Increase size limits for to-be-sent skb frag allocations. This
allows tun, tap devices and packet sockets to better cope with large
writes operations.
- Store netdevs in an xarray, to simplify iterating over netdevs.
- Refactor nexthop selection for multipath routes.
- Improve sched class lifetime handling.
- Add backup nexthop ID support for bridge.
- Implement drop reasons support in openvswitch.
- Several data races annotations and fixes.
- Constify the sk parameter of routing functions.
- Prepend kernel version to netconsole message.
Protocols
---------
- Implement support for TCP probing the peer being under memory
pressure.
- Remove hard coded limitation on IPv6 specific info placement
inside the socket struct.
- Get rid of sysctl_tcp_adv_win_scale and use an auto-estimated
per socket scaling factor.
- Scaling-up the IPv6 expired route GC via a separated list of
expiring routes.
- In-kernel support for the TLS alert protocol.
- Better support for UDP reuseport with connected sockets.
- Add NEXT-C-SID support for SRv6 End.X behavior, reducing the SR
header size.
- Get rid of additional ancillary per MPTCP connection struct socket.
- Implement support for BPF-based MPTCP packet schedulers.
- Format MPTCP subtests selftests results in TAP.
- Several new SMC 2.1 features including unique experimental options,
max connections per lgr negotiation, max links per lgr negotiation.
BPF
---
- Multi-buffer support in AF_XDP.
- Add multi uprobe BPF links for attaching multiple uprobes
and usdt probes, which is significantly faster and saves extra fds.
- Implement an fd-based tc BPF attach API (TCX) and BPF link support on
top of it.
- Add SO_REUSEPORT support for TC bpf_sk_assign.
- Support new instructions from cpu v4 to simplify the generated code and
feature completeness, for x86, arm64, riscv64.
- Support defragmenting IPv(4|6) packets in BPF.
- Teach verifier actual bounds of bpf_get_smp_processor_id()
and fix perf+libbpf issue related to custom section handling.
- Introduce bpf map element count and enable it for all program types.
- Add a BPF hook in sys_socket() to change the protocol ID
from IPPROTO_TCP to IPPROTO_MPTCP to cover migration for legacy.
- Introduce bpf_me_mcache_free_rcu() and fix OOM under stress.
- Add uprobe support for the bpf_get_func_ip helper.
- Check skb ownership against full socket.
- Support for up to 12 arguments in BPF trampoline.
- Extend link_info for kprobe_multi and perf_event links.
Netfilter
---------
- Speed-up process exit by aborting ruleset validation if a
fatal signal is pending.
- Allow NLA_POLICY_MASK to be used with BE16/BE32 types.
Driver API
----------
- Page pool optimizations, to improve data locality and cache usage.
- Introduce ndo_hwtstamp_get() and ndo_hwtstamp_set() to avoid the need
for raw ioctl() handling in drivers.
- Simplify genetlink dump operations (doit/dumpit) providing them
the common information already populated in struct genl_info.
- Extend and use the yaml devlink specs to [re]generate the split ops.
- Introduce devlink selective dumps, to allow SF filtering SF based on
handle and other attributes.
- Add yaml netlink spec for netlink-raw families, allow route, link and
address related queries via the ynl tool.
- Remove phylink legacy mode support.
- Support offload LED blinking to phy.
- Add devlink port function attributes for IPsec.
New hardware / drivers
----------------------
- Ethernet:
- Broadcom ASP 2.0 (72165) ethernet controller
- MediaTek MT7988 SoC
- Texas Instruments AM654 SoC
- Texas Instruments IEP driver
- Atheros qca8081 phy
- Marvell 88Q2110 phy
- NXP TJA1120 phy
- WiFi:
- MediaTek mt7981 support
- Can:
- Kvaser SmartFusion2 PCI Express devices
- Allwinner T113 controllers
- Texas Instruments tcan4552/4553 chips
- Bluetooth:
- Intel Gale Peak
- Qualcomm WCN3988 and WCN7850
- NXP AW693 and IW624
- Mediatek MT2925
Drivers
-------
- Ethernet NICs:
- nVidia/Mellanox:
- mlx5:
- support UDP encapsulation in packet offload mode
- IPsec packet offload support in eswitch mode
- improve aRFS observability by adding new set of counters
- extends MACsec offload support to cover RoCE traffic
- dynamic completion EQs
- mlx4:
- convert to use auxiliary bus instead of custom interface logic
- Intel
- ice:
- implement switchdev bridge offload, even for LAG interfaces
- implement SRIOV support for LAG interfaces
- igc:
- add support for multiple in-flight TX timestamps
- Broadcom:
- bnxt:
- use the unified RX page pool buffers for XDP and non-XDP
- use the NAPI skb allocation cache
- OcteonTX2:
- support Round Robin scheduling HTB offload
- TC flower offload support for SPI field
- Freescale:
- add XDP_TX feature support
- AMD:
- ionic: add support for PCI FLR event
- sfc:
- basic conntrack offload
- introduce eth, ipv4 and ipv6 pedit offloads
- ST Microelectronics:
- stmmac: maximze PTP timestamping resolution
- Virtual NICs:
- Microsoft vNIC:
- batch ringing RX queue doorbell on receiving packets
- add page pool for RX buffers
- Virtio vNIC:
- add per queue interrupt coalescing support
- Google vNIC:
- add queue-page-list mode support
- Ethernet high-speed switches:
- nVidia/Mellanox (mlxsw):
- add port range matching tc-flower offload
- permit enslavement to netdevices with uppers
- Ethernet embedded switches:
- Marvell (mv88e6xxx):
- convert to phylink_pcs
- Renesas:
- r8A779fx: add speed change support
- rzn1: enables vlan support
- Ethernet PHYs:
- convert mv88e6xxx to phylink_pcs
- WiFi:
- Qualcomm Wi-Fi 7 (ath12k):
- extremely High Throughput (EHT) PHY support
- RealTek (rtl8xxxu):
- enable AP mode for: RTL8192FU, RTL8710BU (RTL8188GU),
RTL8192EU and RTL8723BU
- RealTek (rtw89):
- Introduce Time Averaged SAR (TAS) support
- Connector:
- support for event filtering
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----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=9CsR
-----END PGP SIGNATURE-----
Merge tag 'net-next-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Paolo Abeni:
"Core:
- Increase size limits for to-be-sent skb frag allocations. This
allows tun, tap devices and packet sockets to better cope with
large writes operations
- Store netdevs in an xarray, to simplify iterating over netdevs
- Refactor nexthop selection for multipath routes
- Improve sched class lifetime handling
- Add backup nexthop ID support for bridge
- Implement drop reasons support in openvswitch
- Several data races annotations and fixes
- Constify the sk parameter of routing functions
- Prepend kernel version to netconsole message
Protocols:
- Implement support for TCP probing the peer being under memory
pressure
- Remove hard coded limitation on IPv6 specific info placement inside
the socket struct
- Get rid of sysctl_tcp_adv_win_scale and use an auto-estimated per
socket scaling factor
- Scaling-up the IPv6 expired route GC via a separated list of
expiring routes
- In-kernel support for the TLS alert protocol
- Better support for UDP reuseport with connected sockets
- Add NEXT-C-SID support for SRv6 End.X behavior, reducing the SR
header size
- Get rid of additional ancillary per MPTCP connection struct socket
- Implement support for BPF-based MPTCP packet schedulers
- Format MPTCP subtests selftests results in TAP
- Several new SMC 2.1 features including unique experimental options,
max connections per lgr negotiation, max links per lgr negotiation
BPF:
- Multi-buffer support in AF_XDP
- Add multi uprobe BPF links for attaching multiple uprobes and usdt
probes, which is significantly faster and saves extra fds
- Implement an fd-based tc BPF attach API (TCX) and BPF link support
on top of it
- Add SO_REUSEPORT support for TC bpf_sk_assign
- Support new instructions from cpu v4 to simplify the generated code
and feature completeness, for x86, arm64, riscv64
- Support defragmenting IPv(4|6) packets in BPF
- Teach verifier actual bounds of bpf_get_smp_processor_id() and fix
perf+libbpf issue related to custom section handling
- Introduce bpf map element count and enable it for all program types
- Add a BPF hook in sys_socket() to change the protocol ID from
IPPROTO_TCP to IPPROTO_MPTCP to cover migration for legacy
- Introduce bpf_me_mcache_free_rcu() and fix OOM under stress
- Add uprobe support for the bpf_get_func_ip helper
- Check skb ownership against full socket
- Support for up to 12 arguments in BPF trampoline
- Extend link_info for kprobe_multi and perf_event links
Netfilter:
- Speed-up process exit by aborting ruleset validation if a fatal
signal is pending
- Allow NLA_POLICY_MASK to be used with BE16/BE32 types
Driver API:
- Page pool optimizations, to improve data locality and cache usage
- Introduce ndo_hwtstamp_get() and ndo_hwtstamp_set() to avoid the
need for raw ioctl() handling in drivers
- Simplify genetlink dump operations (doit/dumpit) providing them the
common information already populated in struct genl_info
- Extend and use the yaml devlink specs to [re]generate the split ops
- Introduce devlink selective dumps, to allow SF filtering SF based
on handle and other attributes
- Add yaml netlink spec for netlink-raw families, allow route, link
and address related queries via the ynl tool
- Remove phylink legacy mode support
- Support offload LED blinking to phy
- Add devlink port function attributes for IPsec
New hardware / drivers:
- Ethernet:
- Broadcom ASP 2.0 (72165) ethernet controller
- MediaTek MT7988 SoC
- Texas Instruments AM654 SoC
- Texas Instruments IEP driver
- Atheros qca8081 phy
- Marvell 88Q2110 phy
- NXP TJA1120 phy
- WiFi:
- MediaTek mt7981 support
- Can:
- Kvaser SmartFusion2 PCI Express devices
- Allwinner T113 controllers
- Texas Instruments tcan4552/4553 chips
- Bluetooth:
- Intel Gale Peak
- Qualcomm WCN3988 and WCN7850
- NXP AW693 and IW624
- Mediatek MT2925
Drivers:
- Ethernet NICs:
- nVidia/Mellanox:
- mlx5:
- support UDP encapsulation in packet offload mode
- IPsec packet offload support in eswitch mode
- improve aRFS observability by adding new set of counters
- extends MACsec offload support to cover RoCE traffic
- dynamic completion EQs
- mlx4:
- convert to use auxiliary bus instead of custom interface
logic
- Intel
- ice:
- implement switchdev bridge offload, even for LAG
interfaces
- implement SRIOV support for LAG interfaces
- igc:
- add support for multiple in-flight TX timestamps
- Broadcom:
- bnxt:
- use the unified RX page pool buffers for XDP and non-XDP
- use the NAPI skb allocation cache
- OcteonTX2:
- support Round Robin scheduling HTB offload
- TC flower offload support for SPI field
- Freescale:
- add XDP_TX feature support
- AMD:
- ionic: add support for PCI FLR event
- sfc:
- basic conntrack offload
- introduce eth, ipv4 and ipv6 pedit offloads
- ST Microelectronics:
- stmmac: maximze PTP timestamping resolution
- Virtual NICs:
- Microsoft vNIC:
- batch ringing RX queue doorbell on receiving packets
- add page pool for RX buffers
- Virtio vNIC:
- add per queue interrupt coalescing support
- Google vNIC:
- add queue-page-list mode support
- Ethernet high-speed switches:
- nVidia/Mellanox (mlxsw):
- add port range matching tc-flower offload
- permit enslavement to netdevices with uppers
- Ethernet embedded switches:
- Marvell (mv88e6xxx):
- convert to phylink_pcs
- Renesas:
- r8A779fx: add speed change support
- rzn1: enables vlan support
- Ethernet PHYs:
- convert mv88e6xxx to phylink_pcs
- WiFi:
- Qualcomm Wi-Fi 7 (ath12k):
- extremely High Throughput (EHT) PHY support
- RealTek (rtl8xxxu):
- enable AP mode for: RTL8192FU, RTL8710BU (RTL8188GU),
RTL8192EU and RTL8723BU
- RealTek (rtw89):
- Introduce Time Averaged SAR (TAS) support
- Connector:
- support for event filtering"
* tag 'net-next-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1806 commits)
net: ethernet: mtk_wed: minor change in wed_{tx,rx}info_show
net: ethernet: mtk_wed: add some more info in wed_txinfo_show handler
net: stmmac: clarify difference between "interface" and "phy_interface"
r8152: add vendor/device ID pair for D-Link DUB-E250
devlink: move devlink_notify_register/unregister() to dev.c
devlink: move small_ops definition into netlink.c
devlink: move tracepoint definitions into core.c
devlink: push linecard related code into separate file
devlink: push rate related code into separate file
devlink: push trap related code into separate file
devlink: use tracepoint_enabled() helper
devlink: push region related code into separate file
devlink: push param related code into separate file
devlink: push resource related code into separate file
devlink: push dpipe related code into separate file
devlink: move and rename devlink_dpipe_send_and_alloc_skb() helper
devlink: push shared buffer related code into separate file
devlink: push port related code into separate file
devlink: push object register/unregister notifications into separate helpers
inet: fix IP_TRANSPARENT error handling
...
API:
- Move crypto engine callback from tfm ctx into algorithm object.
- Fix atomic sleep bug in crypto_destroy_instance.
- Move lib/mpi into lib/crypto.
Algorithms:
- Add chacha20 and poly1305 implementation for powerpc p10.
Drivers:
- Add AES skcipher and aead support to starfive.
- Add Dynamic Boost Control support to ccp.
- Add support for STM32P13 platform to stm32.
-----BEGIN PGP SIGNATURE-----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=LbcA
-----END PGP SIGNATURE-----
Merge tag 'v6.6-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto updates from Herbert Xu:
"API:
- Move crypto engine callback from tfm ctx into algorithm object
- Fix atomic sleep bug in crypto_destroy_instance
- Move lib/mpi into lib/crypto
Algorithms:
- Add chacha20 and poly1305 implementation for powerpc p10
Drivers:
- Add AES skcipher and aead support to starfive
- Add Dynamic Boost Control support to ccp
- Add support for STM32P13 platform to stm32"
* tag 'v6.6-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (149 commits)
Revert "dt-bindings: crypto: qcom,prng: Add SM8450"
crypto: chelsio - Remove unused declarations
X.509: if signature is unsupported skip validation
crypto: qat - fix crypto capability detection for 4xxx
crypto: drivers - Explicitly include correct DT includes
crypto: engine - Remove crypto_engine_ctx
crypto: zynqmp - Use new crypto_engine_op interface
crypto: virtio - Use new crypto_engine_op interface
crypto: stm32 - Use new crypto_engine_op interface
crypto: jh7110 - Use new crypto_engine_op interface
crypto: rk3288 - Use new crypto_engine_op interface
crypto: omap - Use new crypto_engine_op interface
crypto: keembay - Use new crypto_engine_op interface
crypto: sl3516 - Use new crypto_engine_op interface
crypto: caam - Use new crypto_engine_op interface
crypto: aspeed - Remove non-standard sha512 algorithms
crypto: aspeed - Use new crypto_engine_op interface
crypto: amlogic - Use new crypto_engine_op interface
crypto: sun8i-ss - Use new crypto_engine_op interface
crypto: sun8i-ce - Use new crypto_engine_op interface
...
Core GPIOLIB updates:
- wake-up poll() in user-space on device unbind
- improve fwnode usage
- interrupt domain handling improvements
- correctly handle the ngpios property in gpio-mmio
Driver cleanups:
- remove unneeded calls to platform_set_drvdata() all around the place
- remove unneeded of_match_ptr() expansions whenever a driver depends on
CONFIG_OF
- remove redundant calls to dev_err_probe() from gpio-omap and gpio-davinci
Driver improvements:
- use autopointers and guards from cleanup.h in gpio-sim
- shrink code in gpio-sim using some common helpers
- convert the idio family of drivers to using gpio-regmap
- convert gpio-ws16c48 to using gpio-regmap
- use devres to simplify code in gpio-pisosr and gpio-mxc
- update gpio-sifive: support IRQ wake, improve interrupt handling, allow
building as module
- make gpio-ge and gpio-bcm-kona OF-independent (plus some minor tweaks)
- add support for new models in gpio-pca953x and gpio-ds4520
- add runtime PM support to gpio-mxc
- fix a build warning in gpio-mxs
- add support for adding pin ranges to gpio-mlxbf3
- add counter/timer support to gpio-104-dio-48e
- switch to dynamic GPIO base allocation in gpio-vf610
- minor oneliners here and there
Device-tree bindings updates:
- enable the gpio-line-names property in snps,dw-apb and STMPE GPIO
- document new models in fsl-imx-gpio, ds4520 and pca95xx
- convert the bindings for brcm,kona-gpio to YAML
-----BEGIN PGP SIGNATURE-----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=t+zD
-----END PGP SIGNATURE-----
Merge tag 'gpio-updates-for-v6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio updates from Bartosz Golaszewski:
"We have a lot of code refactoring using common helpers and ended up
removing more lines then we're adding this release cycle.
Nothing really stands out, just small updates all over the place.
Core GPIOLIB updates:
- wake-up poll() in user-space on device unbind
- improve fwnode usage
- interrupt domain handling improvements
- correctly handle the ngpios property in gpio-mmio
Driver cleanups:
- remove unneeded calls to platform_set_drvdata() all around the
place
- remove unneeded of_match_ptr() expansions whenever a driver depends
on CONFIG_OF
- remove redundant calls to dev_err_probe() from gpio-omap and
gpio-davinci
Driver improvements:
- use autopointers and guards from cleanup.h in gpio-sim
- shrink code in gpio-sim using some common helpers
- convert the idio family of drivers to using gpio-regmap
- convert gpio-ws16c48 to using gpio-regmap
- use devres to simplify code in gpio-pisosr and gpio-mxc
- update gpio-sifive: support IRQ wake, improve interrupt handling,
allow building as module
- make gpio-ge and gpio-bcm-kona OF-independent (plus some minor
tweaks)
- add support for new models in gpio-pca953x and gpio-ds4520
- add runtime PM support to gpio-mxc
- fix a build warning in gpio-mxs
- add support for adding pin ranges to gpio-mlxbf3
- add counter/timer support to gpio-104-dio-48e
- switch to dynamic GPIO base allocation in gpio-vf610
- minor oneliners here and there
Device-tree bindings updates:
- enable the gpio-line-names property in snps,dw-apb and STMPE GPIO
- document new models in fsl-imx-gpio, ds4520 and pca95xx
- convert the bindings for brcm,kona-gpio to YAML"
* tag 'gpio-updates-for-v6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (94 commits)
gpio: pca953x: add support for TCA9538
dt-bindings: gpio: pca95xx: document new tca9538 chip
gpio: pca953x: Use i2c_get_match_data()
gpio: mlxbf3: use capital "OR" for multiple licenses in SPDX
gpio: pcf857x: Extend match data support for OF tables
gpio: vf610: switch to dynamic allocat GPIO base
gpiolib: provide and use gpiod_line_state_notify()
gpio: cdev: wake up lineevent poll() on device unbind
gpio: cdev: wake up linereq poll() on device unbind
gpio: cdev: wake up chardev poll() on device unbind
gpiolib: add a second blocking notifier to struct gpio_device
gpio: cdev: open-code to_gpio_chardev_data()
gpiolib: rename the gpio_device notifier
gpio: mlxbf3: Support add_pin_ranges()
gpio: mxc: Use helper function devm_clk_get_optional_enabled()
gpio: pca9570: fix kerneldoc
gpio: sim: simplify code with cleanup helpers
gpio: sim: replace memmove() + strstrip() with skip_spaces() + strim()
gpio: sim: simplify gpio_sim_device_config_live_store()
gpio: mxc: release the parent IRQ in runtime suspend
...
- New drivers
* Driver for Renesas HS3001
- Chip support added to existing drivers
* pmbus/mp2975 driver now supports MP2971 and MP2973
- Functional improvements
* Additional voltage and temperature sensor support for
NCT6798/NCT6799 in nt6755 driver
* it87 driver now detects AMDTSI sensor type
* dimmtemp now supports more than 32 DIMMs
- Driver removals
* sm665 driver removed as unsupportable and long since obsolete
- Minor fixes, cleanups, and simplifications in several drivers
-----BEGIN PGP SIGNATURE-----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=dpys
-----END PGP SIGNATURE-----
Merge tag 'hwmon-for-v6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
Pull hwmon updates from Guenter Roeck:
"New drivers:
- Renesas HS3001
Chip support added to existing drivers:
- pmbus/mp2975 driver now supports MP2971 and MP2973
Functional improvements:
- Additional voltage and temperature sensor support for
NCT6798/NCT6799 in nt6755 driver
- it87 driver now detects AMDTSI sensor type
- dimmtemp now supports more than 32 DIMMs
Driver removals:
- sm665 driver removed as unsupportable and long since obsolete
.. and minor fixes, cleanups, and simplifications in several drivers"
* tag 'hwmon-for-v6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (57 commits)
hwmon: (tmp513) Simplify probe()
hwmon: (tmp513) Fix the channel number in tmp51x_is_visible()
hwmon: (mlxreg-fan) Extend number of supported fans
hwmon: (sis5595) Do PCI error checks on own line
hwmon: (vt8231) Do PCI error checks on own line
hwmon: (via686a) Do PCI error checks on own line
hwmon: pmbus: Fix -EIO seen on pli1209
hwmon: pmbus: Drop unnecessary clear fault page
hwmon: pmbus: Reduce clear fault page invocations
hwmon: (nsa320-hwmon) Remove redundant of_match_ptr()
hwmon: (pmbus/ucd9200) fix Wvoid-pointer-to-enum-cast warning
hwmon: (pmbus/ucd9000) fix Wvoid-pointer-to-enum-cast warning
hwmon: (pmbus/tps53679) fix Wvoid-pointer-to-enum-cast warning
hwmon: (pmbus/ibm-cffps) fix Wvoid-pointer-to-enum-cast warning
hwmon: (tmp513) fix Wvoid-pointer-to-enum-cast warning
hwmon: (max6697) fix Wvoid-pointer-to-enum-cast warning
hwmon: (max20730) fix Wvoid-pointer-to-enum-cast warning
hwmon: (lm90) fix Wvoid-pointer-to-enum-cast warning
hwmon: (lm85) fix Wvoid-pointer-to-enum-cast warning
hwmon: (lm75) fix Wvoid-pointer-to-enum-cast warning
...
- Convert drivers to use the ->remove_new() callback
- Propagate the removable attribute for the card's device
MMC host:
- Convert drivers to use the ->remove_new() callback
- atmel-mci: Convert to gpio descriptors and cleanup the code
- davinci: Make SDIO irq truly optional
- renesas_sdhi: Register irqs before registering controller
- sdhci: Simplify the sdhci_pltfm_* interface a bit
- sdhci-esdhc-imx: Improve support for the 1.8V errata
- sdhci-of-at91: Add support for the microchip sam9x7 variant
- sdhci-of-dwcmshc: Add support for runtime PM
- sdhci-pci-o2micro: Add support for the new Bayhub GG8 variant
- sdhci-sprd: Add support for SD high-speed mode tuning
- uniphier-sd: Register irqs before registering controller
-----BEGIN PGP SIGNATURE-----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=ktYf
-----END PGP SIGNATURE-----
Merge tag 'mmc-v6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc
Pull MMC updates from Ulf Hansson:
"MMC core:
- Convert drivers to use the ->remove_new() callback
- Propagate the removable attribute for the card's device
MMC host:
- Convert drivers to use the ->remove_new() callback
- atmel-mci: Convert to gpio descriptors and cleanup the code
- davinci: Make SDIO irq truly optional
- renesas_sdhi: Register irqs before registering controller
- sdhci: Simplify the sdhci_pltfm_* interface a bit
- sdhci-esdhc-imx: Improve support for the 1.8V errata
- sdhci-of-at91: Add support for the microchip sam9x7 variant
- sdhci-of-dwcmshc: Add support for runtime PM
- sdhci-pci-o2micro: Add support for the new Bayhub GG8 variant
- sdhci-sprd: Add support for SD high-speed mode tuning
- uniphier-sd: Register irqs before registering controller"
* tag 'mmc-v6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (108 commits)
mmc: atmel-mci: Move card detect gpio polarity quirk to gpiolib
mmc: atmel-mci: move atmel MCI header file
mmc: atmel-mci: Convert to gpio descriptors
mmc: sdhci-sprd: Add SD HS mode online tuning
mmc: core: Add host specific tuning support for SD HS mode
mmc: sdhci-of-dwcmshc: Add runtime PM operations
mmc: sdhci-of-dwcmshc: Add error handling in dwcmshc_resume
mmc: sdhci-esdhc-imx: improve ESDHC_FLAG_ERR010450
mmc: sdhci-pltfm: Rename sdhci_pltfm_register()
mmc: sdhci-pltfm: Remove sdhci_pltfm_unregister()
mmc: sdhci-st: Use sdhci_pltfm_remove()
mmc: sdhci-pxav2: Use sdhci_pltfm_remove()
mmc: sdhci-of-sparx5: Use sdhci_pltfm_remove()
mmc: sdhci-of-hlwd: Use sdhci_pltfm_remove()
mmc: sdhci-of-esdhc: Use sdhci_pltfm_remove()
mmc: sdhci-of-at91: Use sdhci_pltfm_remove()
mmc: sdhci-of-arasan: Use sdhci_pltfm_remove()
mmc: sdhci-iproc: Use sdhci_pltfm_remove()
mmc: sdhci_f_sdh30: Use sdhci_pltfm_remove()
mmc: sdhci-dove: Use sdhci_pltfm_remove()
...
There's been quite a lot of generic activity here, but more
administrative than featuers. We also have a bunch of new drivers,
including one that's part of a MFD so we pulled in the core parts of
that:
- Lots of work from both Yang Yingliang and Andy Shevchenko on moving
to host/device/controller based terminology for devices.
- QuadSPI SPI support for Allwinner sun6i.
- New device support Cirrus Logic CS43L43, Longsoon, Qualcomm GENI
QuPv3 and StarFive JH7110 QSPI.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmTp6KQACgkQJNaLcl1U
h9BHMQf+Jtvdx8cIhzVyMRBUfmeEzpi5oGiurPiQVBM5RsO0APULbxdy1kBsQ4FO
5Omv7juG323XiZc1hrtBPNoZfnn83pjjMFZZZYse8Ntd6e5iesHzxRQJaml8NPBA
0ktJQiB6Eh9WTjYT6LgN8T5j4SLT5F2jiDinBPUj1vHGSy0YXGWpYFq9QIkXwMbE
8n0jyf5+Neccs4CIiPR3ap8NjIyPE/b761acRFkOmF+iiHWmnFrQYNS4CSxR2kOC
yL0SlzuoG2feYSfiHyCKIPC0MGT5/Vn1tzNqoEam6B6Ecql24W8BMdU0/No3yKPT
22LIfRWR9Wb5usFxjDxIs9YaWD4abA==
=oj/i
-----END PGP SIGNATURE-----
Merge tag 'spi-v6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi updates from Mark Brown:
"There's been quite a lot of generic activity here, but more
administrative than featuers. We also have a bunch of new drivers,
including one that's part of a MFD so we pulled in the core parts of
that:
- Lots of work from both Yang Yingliang and Andy Shevchenko on moving
to host/device/controller based terminology for devices.
- QuadSPI SPI support for Allwinner sun6i.
- New device support Cirrus Logic CS43L43, Longsoon, Qualcomm GENI
QuPv3 and StarFive JH7110 QSPI"
* tag 'spi-v6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (151 commits)
spi: at91-usart: Use PTR_ERR_OR_ZERO() to simplify code
spi: spi-sn-f-ospi: switch to use modern name
spi: sifive: switch to use modern name
spi: sh: switch to use modern name
spi: sh-sci: switch to use modern name
spi: sh-msiof: switch to use modern name
spi: sh-hspi: switch to use modern name
spi: sc18is602: switch to use modern name
spi: s3c64xx: switch to use modern name
spi: rzv2m-csi: switch to use devm_spi_alloc_host()
spi: rspi: switch to use spi_alloc_host()
spi: rockchip: switch to use modern name
spi: rockchip-sfc: switch to use modern name
spi: realtek-rtl: switch to use devm_spi_alloc_host()
spi: rb4xx: switch to use modern name
spi: qup: switch to use modern name
spi: spi-qcom-qspi: switch to use modern name
spi: pxa2xx: switch to use modern name
spi: ppc4xx: switch to use modern name
spi: spl022: switch to use modern name
...
.set_trips callback (Mikko Perttunen)
- Add the new Loongson-2 thermal sensor along with the DT bindings
(Yinbo Zhu)
- Use IS_ERR_OR_NULL helper to replace a double test on the TI bandgap
sensor (Li Zetao)
- Remove the call to platform_set_drvdata() as there is no call to
platform_get_drvdata() in a bunch of drivers where that happens
(Andrei Coardos)
- Switch the Mediatek LVTS mode to filtered in order to enable the
interrupts (Nícolas F. R. A. Prado)
- Fix Wvoid-pointer-to-enum-cast warning on the Exynos TMU (Krzysztof
Kozlowski)
- Remove redundant usage of of_match_ptr() as the driver db8500
already depends on CONFIG_OF (Ruan Jinjie)
- Remove redundant dev_err_probe() because the underlying function
already called it in the Mediatek sensor (Chen Jiahao)
- Free calibration nvmem after reading it on sun8i (Mark Brown)
- Remove useless comment in the code on sun8i (Yangtao Li)
- Make tsens_xxxx_nvmem static to fix sparse warning on QCom tsens (Min-Hua Chen)
- Remove error message at probe deferral on imx8mm (Ahmad Fatoum)
- Fix parameter check in lvts_debugfs_init with IS_ERR on Mediatek
LVTS (Minjie Du)
- Fix the interrupt routine and configuratoin for the Mediatek LVTS
(Nícolas F. R. A. Prado)
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEGn3N4YVz0WNVyHskqDIjiipP6E8FAmTtjxEACgkQqDIjiipP
6E+I6Qf6A8KAWre/B5L9F5PyhYomNsvNh9YPMZoyK6OARbJ8YORKbPTki2Fa8+8F
n757yahMw1yI36n/9euLpPdTXF1dW2rL44wrwGazWv/DJEM9OCQa9ExSY+GuI7OE
rN7asQmFF6Cjk7h4ha6wwsMO8jQ6htjcHEnLq/QA3x/RpVVb9JOJaSOXqlZUs7Q9
321DtHQ6WbIO/rPT4HoX+fRof+O2AWswvgudF1++p9GsxW+wn2eiJ+eD4hleuf9F
NteYqpHVXxo/XkMTDCZUMyY2dhS7LGjmRYXSYuTbpJnQU75VzNmGNG+8f1GqAZ3X
JoGPetiUkfqtAviB5eNTtE7JXz2lbw==
=sWIi
-----END PGP SIGNATURE-----
Merge tag 'thermal-v6.6-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/thermal/linux
Merge ARM and related thermal control updates for 6.6-rc1 from Daniel
Lezcano:
"- Check if the Tegra BPMP supports the trip points in order to set the
.set_trips callback (Mikko Perttunen)
- Add the new Loongson-2 thermal sensor along with the DT bindings
(Yinbo Zhu)
- Use IS_ERR_OR_NULL helper to replace a double test on the TI bandgap
sensor (Li Zetao)
- Remove the call to platform_set_drvdata() as there is no call to
platform_get_drvdata() in a bunch of drivers where that happens
(Andrei Coardos)
- Switch the Mediatek LVTS mode to filtered in order to enable the
interrupts (Nícolas F. R. A. Prado)
- Fix Wvoid-pointer-to-enum-cast warning on the Exynos TMU (Krzysztof
Kozlowski)
- Remove redundant usage of of_match_ptr() as the driver db8500
already depends on CONFIG_OF (Ruan Jinjie)
- Remove redundant dev_err_probe() because the underlying function
already called it in the Mediatek sensor (Chen Jiahao)
- Free calibration nvmem after reading it on sun8i (Mark Brown)
- Remove useless comment in the code on sun8i (Yangtao Li)
- Make tsens_xxxx_nvmem static to fix sparse warning on QCom tsens (Min-Hua Chen)
- Remove error message at probe deferral on imx8mm (Ahmad Fatoum)
- Fix parameter check in lvts_debugfs_init with IS_ERR on Mediatek
LVTS (Minjie Du)
- Fix the interrupt routine and configuratoin for the Mediatek LVTS
(Nícolas F. R. A. Prado)"
* tag 'thermal-v6.6-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/thermal/linux: (27 commits)
thermal/drivers/tegra-bpmp: Check if BPMP supports trip points
thermal: dt-bindings: add loongson-2 thermal
thermal/drivers/loongson-2: Add thermal management support
thermal/drivers/ti-soc-thermal: Use helper function IS_ERR_OR_NULL()
thermal/drivers/generic-adc: Removed unneeded call to platform_set_drvdata()
thermal/drivers/max77620_thermal: Removed unneeded call to platform_set_drvdata()
thermal/drivers/mediatek/auxadc_thermal: Removed call to platform_set_drvdata()
thermal/drivers/sun8i_thermal: Remove unneeded call to platform_set_drvdata()
thermal/drivers/broadcom/brcstb_thermal: Removed unneeded platform_set_drvdata()
thermal/drivers/mediatek/lvts_thermal: Make readings valid in filtered mode
thermal/drivers/k3_bandgap: Remove unneeded call to platform_set_drvdata()
thermal/drivers/k3_j72xx_bandgap: Removed unneeded call to platform_set_drvdata()
thermal/drivers/broadcom/sr-thermal: Removed call to platform_set_drvdata()
thermal/drivers/samsung: Fix Wvoid-pointer-to-enum-cast warning
thermal/drivers/db8500: Remove redundant of_match_ptr()
thermal/drivers/mediatek: Clean up redundant dev_err_probe()
thermal/drivers/sun8i: Free calibration nvmem after reading it
thermal/drivers/sun8i: Remove unneeded comments
thermal/drivers/tsens: Make tsens_xxxx_nvmem static
thermal/drivers/imx8mm: Suppress log message on probe deferral
...
Other tha new device support and some minor fixes this has been a really
quiet release, the only notable things are the new drivers. There's a
couple of MFDs among the new devices so the generic parts are pulled in:
- Support for Analog Devices MAX77831/57/59, Awinc AW37503, Qualcom
PMX75 and RFGEN, RealTek RT5733, RichTek RTQ2208 and Texas
Instruments TPS65086.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmTp6U4ACgkQJNaLcl1U
h9Cu4gf/RZZirDVcISmKrIYn95Dc838pHFe3tIK9Ehbwms/pzBWBzT0Eiy36g4Vd
1pUB6YJKJZIKLOfFAjmudGtT9C3Yrui+3cR3dPtxN793ixfCkT2RVdeaNJDCJ6xo
cPpAekMroDpMSczDvsTaqJzCXb4y+rjsAQ201w+WhegkSLk/yMsW7Y+a6wpaMjwt
qGD/+EDk/54aogPhrGvKq7uLwCgDo2A6HrU2rIIMHYnZuPaSjsPGcd0fZahlP7Mk
1b6/SSJ+KvN0XSAgBz4yFixECb0OG9p5ukpV17hwDAPBbNqLRp+O/o3LFLq+nsoY
yG3RpJQM6r3Bw3KqdxWF/e5sUNkEsQ==
=ZB93
-----END PGP SIGNATURE-----
Merge tag 'regulator-v6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator updates from Mark Brown:
"Other than new device support and some minor fixes this has been a
really quiet release, the only notable things are the new drivers.
There's a couple of MFDs among the new devices so the generic parts
are pulled in:
- Support for Analog Devices MAX77831/57/59, Awinc AW37503, Qualcom
PMX75 and RFGEN, RealTek RT5733, RichTek RTQ2208 and Texas
Instruments TPS65086"
* tag 'regulator-v6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (68 commits)
regulator: userspace-consumer: Drop event support for this cycle
regulator: aw37503: Switch back to use struct i2c_driver's .probe()
dt-bindings: regulator: qcom,rpmh-regulator: allow i, j, l, m & n as RPMh resource name suffix
regulator: dt-bindings: Add Awinic AW37503
regulator: aw37503: add regulator driver for Awinic AW37503
regulator: tps65086: Select dedicated regulator config for chip variant
mfd: tps65086: Read DEVICE ID register 1 from device
regulator: raa215300: Update help description
regulator: raa215300: Add missing blank space
regulator: raa215300: Change rate from 32000->32768
regulator: db8500-prcmu: Remove unused declaration power_state_active_is_enabled()
regulator: raa215300: Add const definition
regulator: raa215300: Fix resource leak in case of error
regulator: rtq2208: Switch back to use struct i2c_driver's .probe()
regulator: lp872x: Fix Wvoid-pointer-to-enum-cast warning
regulator: max77857: Fix Wvoid-pointer-to-enum-cast warning
regulator: ltc3589: Fix Wvoid-pointer-to-enum-cast warning
regulator: qcom_rpm-regulator: Use devm_kmemdup to replace devm_kmalloc + memcpy
regulator: tps6286x-regulator: Remove redundant of_match_ptr() macros
regulator: pfuze100-regulator: Remove redundant of_match_ptr() macro
...
Some platforms may not boot if a device driver doesn't
initialize the interconnect path. Mostly it is handled
by the bootloader but we have starting to see cases
where bootloader simply ignores them.
Add the "pcie-mem" & "cpu-pcie" interconnect path as a required
property to the bindings.
Link: https://lore.kernel.org/linux-pci/1689751218-24492-2-git-send-email-quic_krichai@quicinc.com
Signed-off-by: Krishna chaitanya chundru <quic_krichai@quicinc.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
The i.MX8MP appears to have the same easrc support as the Nano, so
add imx8mp as an option with a fallback to imx8mn.
Signed-off-by: Adam Ford <aford173@gmail.com
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org
Acked-by: Conor Dooley <conor.dooley@microchip.com
Link: https://lore.kernel.org/r/20230827023155.467807-1-aford173@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org
- Rework the menu and teo cpuidle governors to avoid calling
tick_nohz_get_sleep_length(), which is likely to become quite
expensive going forward, too often and improve making decisions
regarding whether or not to stop the scheduler tick in the teo
governor (Rafael Wysocki).
- Improve the performance of cpufreq_stats_create_table() in some
cases (Liao Chang).
- Fix two issues in the amd-pstate-ut cpufreq driver (Swapnil Sapkal).
- Use clamp() helper macro to improve the code readability in
cpufreq_verify_within_limits() (Liao Chang).
- Set stale CPU frequency to minimum in intel_pstate (Doug Smythies).
- Migrate cpufreq drivers for various platforms to use void remove
callback (Yangtao Li).
- Add online/offline/exit hooks for Tegra driver (Sumit Gupta).
- Explicitly include correct DT includes in cpufreq (Rob Herring).
- Frequency domain updates for qcom-hw driver (Neil Armstrong).
- Modify AMD pstate driver return the highest_perf value (Meng Li).
- Generic cleanups for cppc, mediatek and powernow driver (Liao Chang,
Konrad Dybcio).
- Add more platforms to cpufreq-arm driver's blocklist (AngeloGioacchino
Del Regno and Konrad Dybcio).
- brcmstb-avs-cpufreq: Fix -Warray-bounds bug (Gustavo A. R. Silva).
- Add device PM helpers to allow a device to remain powered-on during
system-wide transitions (Ulf Hansson).
- Rework hibernation memory snapshotting to avoid storing pages filled
with zeros in hibernation image files (Brian Geffon).
- Add check to make sure that CPU latency QoS constraints do not use
negative values (Clive Lin).
- Optimize rp->domains memory allocation in the Intel RAPL power
capping driver (xiongxin).
- Remove recursion while parsing zones in the arm_scmi power capping
driver (Cristian Marussi).
- Fix memory leak in devfreq_dev_release() (Boris Brezillon).
- Rewrite devfreq_monitor_start() kerneldoc comment (Manivannan
Sadhasivam).
- Explicitly include correct DT includes in devfreq (Rob Herring).
- Remove unsued pm_runtime_update_max_time_suspended() extern
declaration (YueHaibing).
- Add turbo-boost support to cpupower (Wyes Karny).
- Add support for amd_pstate mode change to cpupower (Wyes Karny).
- Fix 'cpupower idle_set' command to accept only numeric values of
arguments (Likhitha Korrapati).
- Clean up OPP code and add new frequency related APIs to it (Viresh
Kumar, Manivannan Sadhasivam).
- Convert ti cpufreq/opp bindings to json schema (Nishanth Menon).
-----BEGIN PGP SIGNATURE-----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=6BIh
-----END PGP SIGNATURE-----
Merge tag 'pm-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management updates from Rafael Wysocki:
"These rework cpuidle governors to call tick_nohz_get_sleep_length()
less often and fix one of them, rework hibernation to avoid storing
pages filled with zeros in hibernation images, switch over some
cpufreq drivers to use void remove callbacks, fix and clean up
multiple cpufreq drivers, fix the devfreq core, update the cpupower
utility and make other assorted improvements.
Specifics:
- Rework the menu and teo cpuidle governors to avoid calling
tick_nohz_get_sleep_length(), which is likely to become quite
expensive going forward, too often and improve making decisions
regarding whether or not to stop the scheduler tick in the teo
governor (Rafael Wysocki)
- Improve the performance of cpufreq_stats_create_table() in some
cases (Liao Chang)
- Fix two issues in the amd-pstate-ut cpufreq driver (Swapnil Sapkal)
- Use clamp() helper macro to improve the code readability in
cpufreq_verify_within_limits() (Liao Chang)
- Set stale CPU frequency to minimum in intel_pstate (Doug Smythies)
- Migrate cpufreq drivers for various platforms to use void remove
callback (Yangtao Li)
- Add online/offline/exit hooks for Tegra driver (Sumit Gupta)
- Explicitly include correct DT includes in cpufreq (Rob Herring)
- Frequency domain updates for qcom-hw driver (Neil Armstrong)
- Modify AMD pstate driver return the highest_perf value (Meng Li)
- Generic cleanups for cppc, mediatek and powernow driver (Liao
Chang, Konrad Dybcio)
- Add more platforms to cpufreq-arm driver's blocklist
(AngeloGioacchino Del Regno and Konrad Dybcio)
- brcmstb-avs-cpufreq: Fix -Warray-bounds bug (Gustavo A. R. Silva)
- Add device PM helpers to allow a device to remain powered-on during
system-wide transitions (Ulf Hansson)
- Rework hibernation memory snapshotting to avoid storing pages
filled with zeros in hibernation image files (Brian Geffon)
- Add check to make sure that CPU latency QoS constraints do not use
negative values (Clive Lin)
- Optimize rp->domains memory allocation in the Intel RAPL power
capping driver (xiongxin)
- Remove recursion while parsing zones in the arm_scmi power capping
driver (Cristian Marussi)
- Fix memory leak in devfreq_dev_release() (Boris Brezillon)
- Rewrite devfreq_monitor_start() kerneldoc comment (Manivannan
Sadhasivam)
- Explicitly include correct DT includes in devfreq (Rob Herring)
- Remove unsued pm_runtime_update_max_time_suspended() extern
declaration (YueHaibing)
- Add turbo-boost support to cpupower (Wyes Karny)
- Add support for amd_pstate mode change to cpupower (Wyes Karny)
- Fix 'cpupower idle_set' command to accept only numeric values of
arguments (Likhitha Korrapati)
- Clean up OPP code and add new frequency related APIs to it (Viresh
Kumar, Manivannan Sadhasivam)
- Convert ti cpufreq/opp bindings to json schema (Nishanth Menon)"
* tag 'pm-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (74 commits)
cpufreq: tegra194: remove opp table in exit hook
cpufreq: powernow-k8: Use related_cpus instead of cpus in driver.exit()
cpufreq: tegra194: add online/offline hooks
cpuidle: teo: Avoid unnecessary variable assignments
cpufreq: qcom-cpufreq-hw: add support for 4 freq domains
dt-bindings: cpufreq: qcom-hw: add a 4th frequency domain
cpufreq: amd-pstate-ut: Fix kernel panic when loading the driver
cpufreq: amd-pstate-ut: Remove module parameter access
cpufreq: Use clamp() helper macro to improve the code readability
PM: sleep: Add helpers to allow a device to remain powered-on
PM: QoS: Add check to make sure CPU latency is non-negative
PM: runtime: Remove unsued extern declaration of pm_runtime_update_max_time_suspended()
cpufreq: intel_pstate: set stale CPU frequency to minimum
cpufreq: stats: Improve the performance of cpufreq_stats_create_table()
dt-bindings: cpufreq: Convert ti-cpufreq to json schema
dt-bindings: opp: Convert ti-omap5-opp-supply to json schema
OPP: Fix argument name in doc comment
cpuidle: menu: Skip tick_nohz_get_sleep_length() call in some cases
cpufreq: cppc: Set fie_disabled to FIE_DISABLED if fails to create kworker_fie
cpufreq: cppc: cppc_cpufreq_get_rate() returns zero in all error cases.
...
CPU features and system registers:
* Advertise hinted conditional branch support (FEAT_HBC) to
userspace
* Avoid false positive "SANITY CHECK" warning when xCR registers
differ outside of the length field
Documentation:
* Fix macro name typo in SME documentation
Entry code:
* Unmask exceptions earlier on the system call entry path
Memory management:
* Don't bother clearing PTE_RDONLY for dirty ptes in
pte_wrprotect() and pte_modify()
Perf and PMU drivers:
* Initial support for Coresight TRBE devices on ACPI systems (the
coresight driver changes will come later)
* Fix hw_breakpoint single-stepping when called from bpf
* Fixes for DDR PMU on i.MX8MP SoC
* Add NUMA-awareness to Hisilicon PCIe PMU driver
* Fix locking dependency issue in Arm DMC620 PMU driver
* Workaround Hisilicon erratum 162001900 in the SMMUv3 PMU driver
* Add support for Arm CMN-700 r3 parts to the CMN PMU driver
* Add support for recent Arm Cortex CPU PMUs
* Update Hisilicon PMU maintainers
Selftests:
* Add a bunch of new features to the hwcap test (JSCVT, PMULL,
AES, SHA1, etc)
* Fix SSVE test to leave streaming-mode after grabbing the
signal context
* Add new test for SVE vector-length changes with SME enabled
Miscellaneous:
* Allow compiler to warn on suspicious looking system register
expressions
* Work around SDEI firmware bug by aborting any running
handlers on a kernel crash
* Fix some harmless warnings when building with W=1
* Remove some unused function declarations
* Other minor fixes and cleanup
-----BEGIN PGP SIGNATURE-----
iQFEBAABCgAuFiEEPxTL6PPUbjXGY88ct6xw3ITBYzQFAmTon4QQHHdpbGxAa2Vy
bmVsLm9yZwAKCRC3rHDchMFjNG0nCAC9lTqppELnqXPA3FswONhtDBnKEufZHp0+
4+Z6CPjAYZpd7ruiezvxeZA62tZl3eX+tYOx+6lf4xYxFA5W/RQdmxM7e0mGJd+n
sgps85kxArApCgJR9zJiTCAIPXzKH5ObsFWWbcRljI9fiISVDTYn1JFAEx9UERI5
5yr6blYF2H115oD8V2f/0vVObGOAuiqNnzqJIuKL1I8H9xBK0pssrKvuCCN8J2o4
28+PeO7PzwWPiSfnO15bLd/bGuzbMCcexv4/DdjtLZaAanW7crJRVAzOon+URuVx
JXmkzQvXkOgSKnEFwfVRYTsUbtOz2cBafjSujVmjwIBymhbBCZR/
=WqmX
-----END PGP SIGNATURE-----
Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 updates from Will Deacon:
"I think we have a bit less than usual on the architecture side, but
that's somewhat balanced out by a large crop of perf/PMU driver
updates and extensions to our selftests.
CPU features and system registers:
- Advertise hinted conditional branch support (FEAT_HBC) to userspace
- Avoid false positive "SANITY CHECK" warning when xCR registers
differ outside of the length field
Documentation:
- Fix macro name typo in SME documentation
Entry code:
- Unmask exceptions earlier on the system call entry path
Memory management:
- Don't bother clearing PTE_RDONLY for dirty ptes in pte_wrprotect()
and pte_modify()
Perf and PMU drivers:
- Initial support for Coresight TRBE devices on ACPI systems (the
coresight driver changes will come later)
- Fix hw_breakpoint single-stepping when called from bpf
- Fixes for DDR PMU on i.MX8MP SoC
- Add NUMA-awareness to Hisilicon PCIe PMU driver
- Fix locking dependency issue in Arm DMC620 PMU driver
- Workaround Hisilicon erratum 162001900 in the SMMUv3 PMU driver
- Add support for Arm CMN-700 r3 parts to the CMN PMU driver
- Add support for recent Arm Cortex CPU PMUs
- Update Hisilicon PMU maintainers
Selftests:
- Add a bunch of new features to the hwcap test (JSCVT, PMULL, AES,
SHA1, etc)
- Fix SSVE test to leave streaming-mode after grabbing the signal
context
- Add new test for SVE vector-length changes with SME enabled
Miscellaneous:
- Allow compiler to warn on suspicious looking system register
expressions
- Work around SDEI firmware bug by aborting any running handlers on a
kernel crash
- Fix some harmless warnings when building with W=1
- Remove some unused function declarations
- Other minor fixes and cleanup"
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (62 commits)
drivers/perf: hisi: Update HiSilicon PMU maintainers
arm_pmu: acpi: Add a representative platform device for TRBE
arm_pmu: acpi: Refactor arm_spe_acpi_register_device()
kselftest/arm64: Fix hwcaps selftest build
hw_breakpoint: fix single-stepping when using bpf_overflow_handler
arm64/sysreg: refactor deprecated strncpy
kselftest/arm64: add jscvt feature to hwcap test
kselftest/arm64: add pmull feature to hwcap test
kselftest/arm64: add AES feature check to hwcap test
kselftest/arm64: add SHA1 and related features to hwcap test
arm64: sysreg: Generate C compiler warnings on {read,write}_sysreg_s arguments
kselftest/arm64: build BTI tests in output directory
perf/imx_ddr: don't enable counter0 if none of 4 counters are used
perf/imx_ddr: speed up overflow frequency of cycle
drivers/perf: hisi: Schedule perf session according to locality
kselftest/arm64: fix a memleak in zt_regs_run()
perf/arm-dmc620: Fix dmc620_pmu_irqs_lock/cpu_hotplug_lock circular lock dependency
perf/smmuv3: Add MODULE_ALIAS for module auto loading
perf/smmuv3: Enable HiSilicon Erratum 162001900 quirk for HIP08/09
kselftest/arm64: Size sycall-abi buffers for the actual maximum VL
...
The Allwinner V3s uses a generic EHCI and OHCI for USB host
communication and the MUSB controller for OTG mode. Add compatible
strings for the EHCI node.
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230828181941.1609894-6-macroalpha82@gmail.com
Signed-off-by: Rob Herring <robh@kernel.org>
The Allwinner V3s uses a generic EHCI and OHCI for USB host
communication and the MUSB controller for OTG mode. Add compatible
strings for the EHCI node.
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230828181941.1609894-5-macroalpha82@gmail.com
Signed-off-by: Rob Herring <robh@kernel.org>
Core:
- Prevent a deadlock of nested interrupt threads vs.
synchronize_hard()
- Removal of a stale extern declaration
Drivers:
- The first new driver since v6.2 for Amlogic-C3 SoCs
- The usual small fixes, cleanups and improvements all over
the place
-----BEGIN PGP SIGNATURE-----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=jiUK
-----END PGP SIGNATURE-----
Merge tag 'irq-core-2023-08-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq updates from Thomas Gleixner:
"Boring updates for the interrupt subsystem:
Core:
- Prevent a deadlock of nested interrupt threads vs.
synchronize_hard()
- Removal of a stale extern declaration
Drivers:
- The first new driver since v6.2 for Amlogic-C3 SoCs
- The usual small fixes, cleanups and improvements all over the
place"
* tag 'irq-core-2023-08-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip: Add support for Amlogic-C3 SoCs
dt-bindings: interrupt-controller: Add support for Amlogic-C3 SoCs
irqchip/irq-mvebu-sei: Use devm_platform_get_and_ioremap_resource()
irqchip/ls-scfg-msi: Use devm_platform_get_and_ioremap_resource()
irqchip: Explicitly include correct DT includes
irqchip/orion: Use of_address_count() helper
irqchip/irq-pruss-intc: Do not check for 0 return after calling platform_get_irq()
irqchip/imx-mu-msi: Do not check for 0 return after calling platform_get_irq()
irqchipr/i8259: Mark i8259_of_init() static
irqchip/mips-gic: Mark gic_irq_domain_free() static
irqchip/xtensa-pic: Include header for xtensa_pic_init_legacy()
irqchip/loongson-eiointc: Fix return value checking of eiointc_index
genirq: Remove unused extern declaration
genirq: Prevent nested thread vs synchronize_hardirq() deadlock
The old email is no longer functioning.
Fixes: 17b1362d4919 ("MAINTAINERS: Update email address")
Signed-off-by: David Heidelberg <david@ixit.cz>
Link: https://lore.kernel.org/r/20230823223622.91789-1-david@ixit.cz
Signed-off-by: Rob Herring <robh@kernel.org>
* Fix -Wvoid-pointer-to-enum-cast warning
* Export 'nand_exit_status_op()'
* dt-bindings: Fix nand-controller.yaml license
Raw NAND controller driver changes:
* Omap, Omap2, Samsung, Atmel, fsl_upm, lpc32xx_slc, lpc32xx_mlc, STM32_FMC2,
sh_ftlctl, MXC, Sunxi:
- Use devm_platform_get_and_ioremap_resource()
* Orion, vf610_nfc, Sunxi, STM32_FMC2, MTK, mpc5121, lpc32xx_slc, Intel,
FSMC, Arasan:
- Use helper function devm_clk_get_optional_enabled()
* Brcmnand:
- Use devm_platform_ioremap_resource_byname()
- Propagate init error -EPROBE_DEFER up
- Propagate error and simplify ternary operators
- Fix mtd oobsize
- Fix potential out-of-bounds access in oob write
- Fix crash during the panic_write
- Fix potential false time out warning
- Fix ECC level field setting for v7.2 controller
* fsmc: Handle clk prepare error in fsmc_nand_resume()
* Marvell: Add support for AC5 SoC
* Meson:
- Support for 512B ECC step size
- Fix build error
- Use NAND core API to check status
- dt-bindings:
* Make ECC properties dependent
* Support for 512B ECC step size
* Drop unneeded quotes
* Oxnas: Remove driver and bindings
* Qcom:
- Conversion to ->exec_op()
- Removal of the legacy interface
- Two full series of improvements/misc fixes
* Use the BIT() macro
* Use u8 instead of uint8_t
* Fix alignment with open parenthesis
* Fix the spacing
* Fix wrong indentation
* Fix a typo
* Early structure initialization
* Fix address parsing within ->exec_op()
* Remove superfluous initialization of "ret"
* Rename variables in qcom_op_cmd_mapping()
* Handle unsupported opcode in qcom_op_cmd_mapping()
* Fix the opcode check in qcom_check_op()
* Use EOPNOTSUPP instead of ENOTSUPP
* Wrap qcom_nand_exec_op() to 80 columns
* Unmap sg_list and free desc within submic_descs()
* Simplify the call to nand_prog_page_end_op()
* Do not override the error no of submit_descs()
* Sort includes alphabetically
* Clear buf_count and buf_start in raw read
* Add read/read_start ops in exec_op path
* vf610_nfc: Do not check 0 for platform_get_irq()
SPI-NAND changes:
* gigadevice: Add support for GD5F1GQ{4,5}RExxH
* esmt: Add support for F50D2G41KA
* toshiba: Add support for T{C,H}58NYG{0,2}S3HBAI4 and TH58NYG3S0HBAI6
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEE9HuaYnbmDhq/XIDIJWrqGEe9VoQFAmTsYbAACgkQJWrqGEe9
VoQTsQf+MA+rMfIoyOSLwaFm0Z5UPwIuhleumNgkV2yoC2H42ugz7+Qo4ZS8iHjY
qBUWA/PF4s5snF8A/x4uSEUkdT6etuJ58uKy53304C6cx7RXLtfc7qJfs6fQVLqL
O6uO/EPdUkmiIbdXcRQRiAUDRHEFMPVEHd5pECB0l/qbiNLWQWRFUsmaP6kBZnm1
y7xPfxJo3GuMKJMWnMg+kcoQ7hhIvd0FRztL6VT4SV/et/nfCYjAVXOpViZ8e3+d
tq5yp+WatcBL9tGFSV3IyLW5Z+x1oVDoOIoTk/hWdHsITaHBxXBb8Llc6Eh7GYCD
5mj/renycHEv2Wc2v93z7W3XtnY77Q==
=Pp9B
-----END PGP SIGNATURE-----
Merge tag 'nand/for-6.6' into mtd/next
Raw NAND core changes:
* Fix -Wvoid-pointer-to-enum-cast warning
* Export 'nand_exit_status_op()'
* dt-bindings: Fix nand-controller.yaml license
Raw NAND controller driver changes:
* Omap, Omap2, Samsung, Atmel, fsl_upm, lpc32xx_slc, lpc32xx_mlc, STM32_FMC2,
sh_ftlctl, MXC, Sunxi:
- Use devm_platform_get_and_ioremap_resource()
* Orion, vf610_nfc, Sunxi, STM32_FMC2, MTK, mpc5121, lpc32xx_slc, Intel,
FSMC, Arasan:
- Use helper function devm_clk_get_optional_enabled()
* Brcmnand:
- Use devm_platform_ioremap_resource_byname()
- Propagate init error -EPROBE_DEFER up
- Propagate error and simplify ternary operators
- Fix mtd oobsize
- Fix potential out-of-bounds access in oob write
- Fix crash during the panic_write
- Fix potential false time out warning
- Fix ECC level field setting for v7.2 controller
* fsmc: Handle clk prepare error in fsmc_nand_resume()
* Marvell: Add support for AC5 SoC
* Meson:
- Support for 512B ECC step size
- Fix build error
- Use NAND core API to check status
- dt-bindings:
* Make ECC properties dependent
* Support for 512B ECC step size
* Drop unneeded quotes
* Oxnas: Remove driver and bindings
* Qcom:
- Conversion to ->exec_op()
- Removal of the legacy interface
- Two full series of improvements/misc fixes
* Use the BIT() macro
* Use u8 instead of uint8_t
* Fix alignment with open parenthesis
* Fix the spacing
* Fix wrong indentation
* Fix a typo
* Early structure initialization
* Fix address parsing within ->exec_op()
* Remove superfluous initialization of "ret"
* Rename variables in qcom_op_cmd_mapping()
* Handle unsupported opcode in qcom_op_cmd_mapping()
* Fix the opcode check in qcom_check_op()
* Use EOPNOTSUPP instead of ENOTSUPP
* Wrap qcom_nand_exec_op() to 80 columns
* Unmap sg_list and free desc within submic_descs()
* Simplify the call to nand_prog_page_end_op()
* Do not override the error no of submit_descs()
* Sort includes alphabetically
* Clear buf_count and buf_start in raw read
* Add read/read_start ops in exec_op path
* vf610_nfc: Do not check 0 for platform_get_irq()
SPI-NAND changes:
* gigadevice: Add support for GD5F1GQ{4,5}RExxH
* esmt: Add support for F50D2G41KA
* toshiba: Add support for T{C,H}58NYG{0,2}S3HBAI4 and TH58NYG3S0HBAI6
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
- Minor core cleanup and addition of new frequency related APIs (Viresh
Kumar and Manivannan Sadhasivam).
- Convert ti cpufreq/opp bindings to json schema (Nishanth Menon).
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEx73Crsp7f6M6scA70rkcPK6BEhwFAmTsdWEACgkQ0rkcPK6B
EhyuNhAAtd3KqoIlE4L1fGQe1F3tukuPR8KCYyeDJzT+mvjlBTi6xcDJoMSdiE68
tRH6QI6+dzzFnyLbC3v3WULWosFkY1ETkZNVvmjyE+DE7v7mwRL5EdAQfJ2OoBH6
7906FHy5XN9+ch/LLJ8ja+d+z9jx38obkVB87nrEio3rocaYuPRYjesum57LWU/7
Bh+9VqiCFIMu0U4cDXHcmrsh9OEupWF4NQZ3N3QDlwKjiSd05jmzYcKx3tOO6oa4
NRNUoQ4AH1qk6BBc/V1igfFXCFSYTY1RRKslzeIDbocNrphXmY6qq2muBbnpmJ2P
Ykyyc+q9cSzzgPV/VHH54g5woJh34oIvxmDPaieAjPVIzLNOJXW7zN2FjeKH4pXZ
kTBtqpUcbqpcZuLryd91WclXIL9WsjdHaB4XkKnsWMFBVcWBrET3d/x4sR1HkD6c
CU0ftr68qzuoT9vyeOs/636FeK+l4Bmsp2m30v5DsoO9DC5n5EMMEZqZHVD0Csvy
bLoEHOhHSMtJwknK8QkRde6KdxwteEbHK2IR1VmKz+ppa87AFbLxfqR1zgtyZ8Ho
0/rtzPODfp2vd+gPfBXfiwhg/57cL1Knxmm0g/11PUQPAYreRxBE+ovPGDJ39oSo
KX9tqqAokirIsdNXFV0v6GWivGZZlcMErGqBMY88Wt2zNkKm7vY=
=b27+
-----END PGP SIGNATURE-----
Merge tag 'opp-updates-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm
Pull OPP updates for 6.6 from Viresh Kumar:
"- Minor core cleanup and addition of new frequency related APIs (Viresh
Kumar and Manivannan Sadhasivam).
- Convert ti cpufreq/opp bindings to json schema (Nishanth Menon)."
* tag 'opp-updates-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm:
dt-bindings: cpufreq: Convert ti-cpufreq to json schema
dt-bindings: opp: Convert ti-omap5-opp-supply to json schema
OPP: Fix argument name in doc comment
dt-bindings: opp: Increase maxItems for opp-hz property
OPP: Fix passing 0 to PTR_ERR in _opp_attach_genpd()
OPP: Fix potential null ptr dereference in dev_pm_opp_get_required_pstate()
OPP: Reuse dev_pm_opp_get_freq_indexed()
OPP: Update _read_freq() to return the correct frequency
OPP: Add dev_pm_opp_find_freq_exact_indexed()
OPP: Introduce dev_pm_opp_get_freq_indexed() API
OPP: Introduce dev_pm_opp_find_freq_{ceil/floor}_indexed() APIs
OPP: Rearrange entries in pm_opp.h
- Migrate various platforms to use remove callback returning void
(Yangtao Li).
- Add online/offline/exit hooks for Tegra driver (Sumit Gupta).
- Explicitly include correct DT includes (Rob Herring).
- Frequency domain updates for qcom-hw driver (Neil Armstrong).
- Modify AMD pstate driver return the highest_perf value (Meng Li).
- Generic cleanups for cppc, mediatek and powernow driver (Liao Chang
and Konrad Dybcio).
- Add more platforms to cpufreq-arm driver's blocklist (AngeloGioacchino
Del Regno and Konrad Dybcio).
- brcmstb-avs-cpufreq: Fix -Warray-bounds bug (Gustavo A. R. Silva).
-----BEGIN PGP SIGNATURE-----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=o0wB
-----END PGP SIGNATURE-----
Merge tag 'cpufreq-arm-updates-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm
Pull ARM cpufreq updates for 6.6 from Viresh Kumar:
"- Migrate various platforms to use remove callback returning void
(Yangtao Li).
- Add online/offline/exit hooks for Tegra driver (Sumit Gupta).
- Explicitly include correct DT includes (Rob Herring).
- Frequency domain updates for qcom-hw driver (Neil Armstrong).
- Modify AMD pstate driver return the highest_perf value (Meng Li).
- Generic cleanups for cppc, mediatek and powernow driver (Liao Chang
and Konrad Dybcio).
- Add more platforms to cpufreq-arm driver's blocklist (AngeloGioacchino
Del Regno and Konrad Dybcio).
- brcmstb-avs-cpufreq: Fix -Warray-bounds bug (Gustavo A. R. Silva)."
* tag 'cpufreq-arm-updates-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm: (33 commits)
cpufreq: tegra194: remove opp table in exit hook
cpufreq: powernow-k8: Use related_cpus instead of cpus in driver.exit()
cpufreq: tegra194: add online/offline hooks
cpufreq: qcom-cpufreq-hw: add support for 4 freq domains
dt-bindings: cpufreq: qcom-hw: add a 4th frequency domain
cpufreq: cppc: Set fie_disabled to FIE_DISABLED if fails to create kworker_fie
cpufreq: cppc: cppc_cpufreq_get_rate() returns zero in all error cases.
cpufreq: Prefer to print cpuid in MIN/MAX QoS register error message
cpufreq: amd-pstate-ut: Modify the function to get the highest_perf value
cpufreq: mediatek-hw: Remove unused define
cpufreq: blocklist more Qualcomm platforms in cpufreq-dt-platdev
cpufreq: brcmstb-avs-cpufreq: Fix -Warray-bounds bug
cpufreq: blocklist MSM8998 in cpufreq-dt-platdev
cpufreq: omap: Convert to platform remove callback returning void
cpufreq: qoriq: Convert to platform remove callback returning void
cpufreq: acpi: Convert to platform remove callback returning void
cpufreq: tegra186: Convert to platform remove callback returning void
cpufreq: qcom-nvmem: Convert to platform remove callback returning void
cpufreq: kirkwood: Convert to platform remove callback returning void
cpufreq: pcc-cpufreq: Convert to platform remove callback returning void
...
Fix wrong switch name in compatibility list. 88E6163 switch does not exist
and is in fact 88E6361
Fixes: 9229a9483d80 ("dt-bindings: net: dsa: marvell: add MV88E6361 switch to compatibility list")
Signed-off-by: Alexis Lothoré <alexis.lothore@bootlin.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Drop unneeded quotes over simple string values to fix recently enabled
yamllint warning:
[error] string value is redundantly quoted with any quotes (quoted-strings)
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20230826093852.9334-1-krzysztof.kozlowski@linaro.org
Convert the Xilinx GMII to RGMII Converter device tree binding
documentation to json schema.
This converter is usually used as gem <---> gmii2rgmii <---> external phy
and, it's phy-handle should point to the phandle of the external phy.
Signed-off-by: Pranavi Somisetty <pranavi.somisetty@amd.com>
Signed-off-by: Harini Katakam <harini.katakam@amd.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
assigned-address is a valid property for I3C device with or without
static address. Fix the description and an example for the same.
Signed-off-by: Aniket <aniketmaurya@google.com>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230822051209.2837818-1-aniketmaurya@google.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Commit c0aba9f32801 ("dt-bindings: PCI: qcom: Add SDX65 SoC") adding
SDX65 was never tested and is clearly bogus. The qcom,sdx65-pcie-ep
compatible is followed by a fallback in DTS, and there is no driver
matched by this compatible. Driver matches by its fallback
qcom,sdx55-pcie-ep. This also fixes dtbs_check warnings like:
qcom-sdx65-mtp.dtb: pcie-ep@1c00000: compatible: ['qcom,sdx65-pcie-ep', 'qcom,sdx55-pcie-ep'] is too long
[kwilczynski: commit log]
Fixes: c0aba9f32801 ("dt-bindings: PCI: qcom: Add SDX65 SoC")
Link: https://lore.kernel.org/linux-pci/20230827085351.21932-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Cc: stable@vger.kernel.org
Add IEP property in ICSSG hardware DT binding document.
ICSSG uses IEP (Industrial Ethernet Peripheral) to support timestamping
of ethernet packets, PTP and PPS.
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Roger Quadros <rogerq@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: MD Danish Anwar <danishanwar@ti.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add a DT binding document for the ICSS Industrial Ethernet Peripheral(IEP)
hardware. IEP supports packet timestamping, PTP and PPS.
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Roger Quadros <rogerq@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: MD Danish Anwar <danishanwar@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This reverts commit b9296bb41275 ("dt-bindings: crypto: qcom,prng: Add SM8450"),
since the RNG HW on the SM8450 SoC is in fact a True Random Number Generator,
a more appropriate compatible should be instead as reported at [1].
[1] https://lore.kernel.org/all/20230818161720.3644424-1-quic_omprsing@quicinc.com/
Suggested-by: Om Prakash Singh <quic_omprsing@quicinc.com>
Suggested-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Document the WCN7850 Bluetooth chipset.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Document the compatible used for the inline crypto engine found on
SM8450.
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230814-dt-binding-ufs-v6-4-fd94845adeda@fairphone.com
Signed-off-by: Rob Herring <robh@kernel.org>
The code in ufs-qcom-ice.c needs the ICE reg to be named "ice". Add this
in the bindings so the existing dts can validate successfully.
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230814-dt-binding-ufs-v6-1-fd94845adeda@fairphone.com
Signed-off-by: Rob Herring <robh@kernel.org>
yamllint has a quoted string check. Enable the check aligned with the
DT schema style which is only using quotes when necessary with the
exception of regex patterns. There's also the frequent occurrence of '/'
which we allow rather than fixing.
Link: https://lore.kernel.org/all/20230324202243.2442956-1-robh@kernel.org/
Signed-off-by: Rob Herring <robh@kernel.org>
Cleanup bindings dropping the last remaining unneeded quotes. With this,
the check for this can be enabled in yamllint.
Acked-by: Miquel Raynal <miquel.raynal@bootlin.com> # for mtd
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Wolfram Sang <wsa@kernel.org> # for AT24/I2C
Acked-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org> # For MMC
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20230823183749.2609013-1-robh@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
Stephen Boyd
Linus Torvalds
Rafael J. Wysocki
Bjorn Helgaas
Krishna chaitanya chundru
Adam Ford
Paolo Abeni
Chris Morgan
David Heidelberg
Miquel Raynal
Alexis Lothoré
Krzysztof Kozlowski
Pranavi Somisetty
Aniket
Nikita Shubin
MD Danish Anwar
Mrinmay Sarkar
Huqiang Qin
Robert Marko
Liam Beguin
Neil Armstrong
Jakub Kicinski
Luca Weiss
Iskren Chernev
Rob Herring