IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
With the introduction of the pool_rwlock (reader-writer lock), several
fast paths end up taking the pool_rwlock as readers. Furthermore,
stack_depot_put() unconditionally takes the pool_rwlock as a writer.
Despite allowing readers to make forward-progress concurrently,
reader-writer locks have inherent cache contention issues, which does not
scale well on systems with large CPU counts.
Rework the synchronization story of stack depot to again avoid taking any
locks in the fast paths. This is done by relying on RCU-protected list
traversal, and the NMI-safe subset of RCU to delay reuse of freed stack
records. See code comments for more details.
Along with the performance issues, this also fixes incorrect nesting of
rwlock within a raw_spinlock, given that stack depot should still be
usable from anywhere:
| [ BUG: Invalid wait context ]
| -----------------------------
| swapper/0/1 is trying to lock:
| ffffffff89869be8 (pool_rwlock){..--}-{3:3}, at: stack_depot_save_flags
| other info that might help us debug this:
| context-{5:5}
| 2 locks held by swapper/0/1:
| #0: ffffffff89632440 (rcu_read_lock){....}-{1:3}, at: __queue_work
| #1: ffff888100092018 (&pool->lock){-.-.}-{2:2}, at: __queue_work <-- raw_spin_lock
Stack depot usage stats are similar to the previous version after a KASAN
kernel boot:
$ cat /sys/kernel/debug/stackdepot/stats
pools: 838
allocations: 29865
frees: 6604
in_use: 23261
freelist_size: 1879
The number of pools is the same as previously. The freelist size is
minimally larger, but this may also be due to variance across system
boots. This shows that even though we do not eagerly wait for the next
RCU grace period (such as with synchronize_rcu() or call_rcu()) after
freeing a stack record - requiring depot_pop_free() to "poll" if an entry
may be used - new allocations are very likely to happen in later RCU grace
periods.
Link: https://lkml.kernel.org/r/20240118110216.2539519-2-elver@google.com
Fixes: 108be8def46e ("lib/stackdepot: allow users to evict stack traces")
Reported-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Marco Elver <elver@google.com>
Reviewed-by: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Add a few basic stats counters for stack depot that can be used to derive
if stack depot is working as intended. This is a snapshot of the new
stats after booting a system with a KASAN-enabled kernel:
$ cat /sys/kernel/debug/stackdepot/stats
pools: 838
allocations: 29861
frees: 6561
in_use: 23300
freelist_size: 1840
Generally, "pools" should be well below the max; once the system is
booted, "in_use" should remain relatively steady.
Link: https://lkml.kernel.org/r/20240118110216.2539519-1-elver@google.com
Signed-off-by: Marco Elver <elver@google.com>
Reviewed-by: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Alexander Potapenko <glider@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Alexander Potapenko writes in [1]: "For every memory access in the code
instrumented by KMSAN we call kmsan_get_metadata() to obtain the metadata
for the memory being accessed. For virtual memory the metadata pointers
are stored in the corresponding `struct page`, therefore we need to call
virt_to_page() to get them.
According to the comment in arch/x86/include/asm/page.h,
virt_to_page(kaddr) returns a valid pointer iff virt_addr_valid(kaddr) is
true, so KMSAN needs to call virt_addr_valid() as well.
To avoid recursion, kmsan_get_metadata() must not call instrumented code,
therefore ./arch/x86/include/asm/kmsan.h forks parts of
arch/x86/mm/physaddr.c to check whether a virtual address is valid or not.
But the introduction of rcu_read_lock() to pfn_valid() added instrumented
RCU API calls to virt_to_page_or_null(), which is called by
kmsan_get_metadata(), so there is an infinite recursion now. I do not
think it is correct to stop that recursion by doing
kmsan_enter_runtime()/kmsan_exit_runtime() in kmsan_get_metadata(): that
would prevent instrumented functions called from within the runtime from
tracking the shadow values, which might introduce false positives."
Fix the issue by switching pfn_valid() to the _sched() variant of
rcu_read_lock/unlock(), which does not require calling into RCU. Given
the critical section in pfn_valid() is very small, this is a reasonable
trade-off (with preemptible RCU).
KMSAN further needs to be careful to suppress calls into the scheduler,
which would be another source of recursion. This can be done by wrapping
the call to pfn_valid() into preempt_disable/enable_no_resched(). The
downside is that this sacrifices breaking scheduling guarantees; however,
a kernel compiled with KMSAN has already given up any performance
guarantees due to being heavily instrumented.
Note, KMSAN code already disables tracing via Makefile, and since mmzone.h
is included, it is not necessary to use the notrace variant, which is
generally preferred in all other cases.
Link: https://lkml.kernel.org/r/20240115184430.2710652-1-glider@google.com [1]
Link: https://lkml.kernel.org/r/20240118110022.2538350-1-elver@google.com
Fixes: 5ec8e8ea8b77 ("mm/sparsemem: fix race in accessing memory_section->usage")
Signed-off-by: Marco Elver <elver@google.com>
Reported-by: Alexander Potapenko <glider@google.com>
Reported-by: syzbot+93a9e8a3dea8d6085e12@syzkaller.appspotmail.com
Reviewed-by: Alexander Potapenko <glider@google.com>
Tested-by: Alexander Potapenko <glider@google.com>
Cc: Charan Teja Kalla <quic_charante@quicinc.com>
Cc: Borislav Petkov (AMD) <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
(struct dirty_throttle_control *)->thresh is an unsigned long, but is
passed as the u32 divisor argument to div_u64(). On architectures where
unsigned long is 64 bytes, the argument will be implicitly truncated.
Use div64_u64() instead of div_u64() so that the value used in the "is
this a safe division" check is the same as the divisor.
Also, remove redundant cast of the numerator to u64, as that should happen
implicitly.
This would be difficult to exploit in memcg domain, given the ratio-based
arithmetic domain_drity_limits() uses, but is much easier in global
writeback domain with a BDI_CAP_STRICTLIMIT-backing device, using e.g.
vm.dirty_bytes=(1<<32)*PAGE_SIZE so that dtc->thresh == (1<<32)
Link: https://lkml.kernel.org/r/20240118181954.1415197-1-zokeefe@google.com
Fixes: f6789593d5ce ("mm/page-writeback.c: fix divide by zero in bdi_dirty_limits()")
Signed-off-by: Zach O'Keefe <zokeefe@google.com>
Cc: Maxim Patlasov <MPatlasov@parallels.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Running charge_reserved_hugetlb.sh generates errors if sh is set to
dash:
./charge_reserved_hugetlb.sh: 9: [[: not found
./charge_reserved_hugetlb.sh: 19: [[: not found
./charge_reserved_hugetlb.sh: 27: [[: not found
./charge_reserved_hugetlb.sh: 37: [[: not found
./charge_reserved_hugetlb.sh: 45: Syntax error: "(" unexpected
Switch to using /bin/bash instead of /bin/sh. Make the switch for
write_hugetlb_memory.sh as well which is called from
charge_reserved_hugetlb.sh.
Link: https://lkml.kernel.org/r/20240116090455.3407378-1-usama.anjum@collabora.com
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Cc: Muhammad Usama Anjum <usama.anjum@collabora.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: David Laight <David.Laight@ACULAB.COM>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
While investigating hosts with high cgroup memory pressures, Tejun
found culprit zombie tasks that had were holding on to a lot of
memory, had SIGKILL pending, but were stuck in memory.high reclaim.
In the past, we used to always force-charge allocations from tasks
that were exiting in order to accelerate them dying and freeing up
their rss. This changed for memory.max in a4ebf1b6ca1e ("memcg:
prohibit unconditional exceeding the limit of dying tasks"); it noted
that this can cause (userspace inducable) containment failures, so it
added a mandatory reclaim and OOM kill cycle before forcing charges.
At the time, memory.high enforcement was handled in the userspace
return path, which isn't reached by dying tasks, and so memory.high
was still never enforced by dying tasks.
When c9afe31ec443 ("memcg: synchronously enforce memory.high for large
overcharges") added synchronous reclaim for memory.high, it added
unconditional memory.high enforcement for dying tasks as well. The
callstack shows that this path is where the zombie is stuck in.
We need to accelerate dying tasks getting past memory.high, but we
cannot do it quite the same way as we do for memory.max: memory.max is
enforced strictly, and tasks aren't allowed to move past it without
FIRST reclaiming and OOM killing if necessary. This ensures very small
levels of excess. With memory.high, though, enforcement happens lazily
after the charge, and OOM killing is never triggered. A lot of
concurrent threads could have pushed, or could actively be pushing,
the cgroup into excess. The dying task will enter reclaim on every
allocation attempt, with little hope of restoring balance.
To fix this, skip synchronous memory.high enforcement on dying tasks
altogether again. Update memory.high path documentation while at it.
[hannes@cmpxchg.org: also handle tasks are being killed during the reclaim]
Link: https://lkml.kernel.org/r/20240111192807.GA424308@cmpxchg.org
Link: https://lkml.kernel.org/r/20240111132902.389862-1-hannes@cmpxchg.org
Fixes: c9afe31ec443 ("memcg: synchronously enforce memory.high for large overcharges")
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Reported-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Yosry Ahmed <yosryahmed@google.com>
Acked-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Dan Schatzberg <schatzberg.dan@gmail.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
commit efa7df3e3bb5 ("mm: align larger anonymous mappings on THP
boundaries") incured regression for stress-ng pthread benchmark [1]. It
is because THP get allocated to pthread's stack area much more possible
than before. Pthread's stack area is allocated by mmap without
VM_GROWSDOWN or VM_GROWSUP flag, so kernel can't tell whether it is a
stack area or not.
The MAP_STACK flag is used to mark the stack area, but it is a no-op on
Linux. Mapping MAP_STACK to VM_NOHUGEPAGE to prevent from allocating THP
for such stack area.
With this change the stack area looks like:
fffd18e10000-fffd19610000 rw-p 00000000 00:00 0
Size: 8192 kB
KernelPageSize: 4 kB
MMUPageSize: 4 kB
Rss: 12 kB
Pss: 12 kB
Pss_Dirty: 12 kB
Shared_Clean: 0 kB
Shared_Dirty: 0 kB
Private_Clean: 0 kB
Private_Dirty: 12 kB
Referenced: 12 kB
Anonymous: 12 kB
KSM: 0 kB
LazyFree: 0 kB
AnonHugePages: 0 kB
ShmemPmdMapped: 0 kB
FilePmdMapped: 0 kB
Shared_Hugetlb: 0 kB
Private_Hugetlb: 0 kB
Swap: 0 kB
SwapPss: 0 kB
Locked: 0 kB
THPeligible: 0
VmFlags: rd wr mr mw me ac nh
The "nh" flag is set.
[1] https://lore.kernel.org/linux-mm/202312192310.56367035-oliver.sang@intel.com/
Link: https://lkml.kernel.org/r/20231221065943.2803551-2-shy828301@gmail.com
Fixes: efa7df3e3bb5 ("mm: align larger anonymous mappings on THP boundaries")
Signed-off-by: Yang Shi <yang@os.amperecomputing.com>
Reported-by: kernel test robot <oliver.sang@intel.com>
Tested-by: Oliver Sang <oliver.sang@intel.com>
Reviewed-by: Yin Fengwei <fengwei.yin@intel.com>
Cc: Rik van Riel <riel@surriel.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Christopher Lameter <cl@linux.com>
Cc: Huang, Ying <ying.huang@intel.com>
Cc: <stable@vger.kerenl.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
uprobes passes an unaligned page mapping address to
folio_add_new_anon_rmap(), which ends up triggering a VM_BUG_ON() we
recently extended in commit 372cbd4d5a066 ("mm: non-pmd-mappable, large
folios for folio_add_new_anon_rmap()").
Arguably, this is uprobes code doing something wrong; however, for the
time being it would have likely worked in rmap code because
__folio_set_anon() would set folio->index to the same value.
Looking at __replace_page(), we'd also pass slightly wrong values to
mmu_notifier_range_init(), page_vma_mapped_walk(), flush_cache_page(),
ptep_clear_flush() and set_pte_at_notify(). I suspect most of them are
fine, but let's just mark the introducing commit as the one needed fixing.
I don't think CC stable is warranted.
We'll add more sanity checks in rmap code separately, to make sure that we
always get properly aligned addresses.
Link: https://lkml.kernel.org/r/20240115100731.91007-1-david@redhat.com
Fixes: c517ee744b96 ("uprobes: __replace_page() should not use page_address_in_vma()")
Signed-off-by: David Hildenbrand <david@redhat.com>
Reported-by: Jiri Olsa <jolsa@kernel.org>
Closes: https://lkml.kernel.org/r/ZaMR2EWN-HvlCfUl@krava
Tested-by: Jiri Olsa <jolsa@kernel.org>
Reviewed-by: Ryan Roberts <ryan.roberts@arm.com>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Alexander Shishkin
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Use 2 separate variables of types int and unsigned long long instead of
confusing them. This corrects the correct print format for each of them
and removes the build warning:
warning: format `%d' expects argument of type `int', but argument 2 has type `long long unsigned int'
Link: https://lkml.kernel.org/r/20240112071851.612930-1-usama.anjum@collabora.com
Fixes: a4cb3b243343 ("selftests: mm: add a test for remapping to area immediately after existing mapping")
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Cc: Joel Fernandes (Google) <joel@joelfernandes.org>
Cc: Lorenzo Stoakes <lstoakes@gmail.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
has_extra_refcount() makes the assumption that the page cache adds a ref
count of 1 and subtracts this in the extra_pins case. Commit a08c7193e4f1
(mm/filemap: remove hugetlb special casing in filemap.c) modifies
__filemap_add_folio() by calling folio_ref_add(folio, nr); for all cases
(including hugtetlb) where nr is the number of pages in the folio. We
should adjust the number of references coming from the page cache by
subtracing the number of pages rather than 1.
In hugetlbfs_read_iter(), folio_test_has_hwpoisoned() is testing the wrong
flag as, in the hugetlb case, memory-failure code calls
folio_test_set_hwpoison() to indicate poison. folio_test_hwpoison() is
the correct function to test for that flag.
After these fixes, the hugetlb hwpoison read selftest passes all cases.
Link: https://lkml.kernel.org/r/20240112180840.367006-1-sidhartha.kumar@oracle.com
Fixes: a08c7193e4f1 ("mm/filemap: remove hugetlb special casing in filemap.c")
Signed-off-by: Sidhartha Kumar <sidhartha.kumar@oracle.com>
Closes: https://lore.kernel.org/linux-mm/20230713001833.3778937-1-jiaqiyan@google.com/T/#m8e1469119e5b831bbd05d495f96b842e4a1c5519
Reported-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Tested-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Acked-by: Miaohe Lin <linmiaohe@huawei.com>
Acked-by: Muchun Song <muchun.song@linux.dev>
Cc: James Houghton <jthoughton@google.com>
Cc: Jiaqi Yan <jiaqiyan@google.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Naoya Horiguchi <naoya.horiguchi@nec.com>
Cc: <stable@vger.kernel.org> [6.7+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
ra_alloc_folio() marks a page that should trigger next round of async
readahead. However it rounds up computed index to the order of page being
allocated. This can however lead to multiple consecutive pages being
marked with readahead flag. Consider situation with index == 1, mark ==
1, order == 0. We insert order 0 page at index 1 and mark it. Then we
bump order to 1, index to 2, mark (still == 1) is rounded up to 2 so page
at index 2 is marked as well. Then we bump order to 2, index is
incremented to 4, mark gets rounded to 4 so page at index 4 is marked as
well. The fact that multiple pages get marked within a single readahead
window confuses the readahead logic and results in readahead window being
trimmed back to 1. This situation is triggered in particular when maximum
readahead window size is not a power of two (in the observed case it was
768 KB) and as a result sequential read throughput suffers.
Fix the problem by rounding 'mark' down instead of up. Because the index
is naturally aligned to 'order', we are guaranteed 'rounded mark' == index
iff 'mark' is within the page we are allocating at 'index' and thus
exactly one page is marked with readahead flag as required by the
readahead code and sequential read performance is restored.
This effectively reverts part of commit b9ff43dd2743 ("mm/readahead: Fix
readahead with large folios"). The commit changed the rounding with the
rationale:
"... we were setting the readahead flag on the folio which contains the
last byte read from the block. This is wrong because we will trigger
readahead at the end of the read without waiting to see if a subsequent
read is going to use the pages we just read."
Although this is true, the fact is this was always the case with read
sizes not aligned to folio boundaries and large folios in the page cache
just make the situation more obvious (and frequent). Also for sequential
read workloads it is better to trigger the readahead earlier rather than
later. It is true that the difference in the rounding and thus earlier
triggering of the readahead can result in reading more for semi-random
workloads. However workloads really suffering from this seem to be rare.
In particular I have verified that the workload described in commit
b9ff43dd2743 ("mm/readahead: Fix readahead with large folios") of reading
random 100k blocks from a file like:
[reader]
bs=100k
rw=randread
numjobs=1
size=64g
runtime=60s
is not impacted by the rounding change and achieves ~70MB/s in both cases.
[jack@suse.cz: fix one more place where mark rounding was done as well]
Link: https://lkml.kernel.org/r/20240123153254.5206-1-jack@suse.cz
Link: https://lkml.kernel.org/r/20240104085839.21029-1-jack@suse.cz
Fixes: b9ff43dd2743 ("mm/readahead: Fix readahead with large folios")
Signed-off-by: Jan Kara <jack@suse.cz>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Guo Xuenan <guoxuenan@huawei.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
amdgpu:
- AC/DC power supply tracking fix
- Don't show invalid vram vendor data
- SMU 13.0.x fixes
- GART fix for umr on systems without VRAM
- GFX 10/11 UNORD_DISPATCH fixes
- IPS display fixes (required for S0ix on some platforms)
- Misc fixes
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQQgO5Idg2tXNTSZAr293/aFa7yZ2AUCZbLbpwAKCRC93/aFa7yZ
2D2cAQCbpuo2Yuxo+LyfB7+k8NzcnNRIJTRsTfsiGVk/wx4hNQEA0DIq1Ellldpx
yMfwQzbZPoY/KacrVySTSWDTs0BNBAE=
=V5bS
-----END PGP SIGNATURE-----
Merge tag 'amd-drm-fixes-6.8-2024-01-25' of https://gitlab.freedesktop.org/agd5f/linux into drm-fixes
amd-drm-fixes-6.8-2024-01-25:
amdgpu:
- AC/DC power supply tracking fix
- Don't show invalid vram vendor data
- SMU 13.0.x fixes
- GART fix for umr on systems without VRAM
- GFX 10/11 UNORD_DISPATCH fixes
- IPS display fixes (required for S0ix on some platforms)
- Misc fixes
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240125221503.5019-1-alexander.deucher@amd.com
- Make an ops struct static
- Fix an implicit 0 to NULL conversion
- A couple of 32-bit fixes
- A migration coherency fix for Lunar Lake.
- An error path vm id leak fix
- Remove PVC references in kunit tests
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRskUM7w1oG5rx2IZO4FpNVCsYGvwUCZbIZgQAKCRC4FpNVCsYG
v280AP90WBOaNCF5f07YQQZzdO9s442BKnMs0gYrNY8Ca/Z/GwD9FiMcyvXtGf9x
ovhdreJvXaK2zv9nUtcK5qJ4MVr+awI=
=bAQt
-----END PGP SIGNATURE-----
Merge tag 'drm-xe-fixes-2024-01-25' of https://gitlab.freedesktop.org/drm/xe/kernel into drm-fixes
Driver Changes:
- Make an ops struct static
- Fix an implicit 0 to NULL conversion
- A couple of 32-bit fixes
- A migration coherency fix for Lunar Lake.
- An error path vm id leak fix
- Remove PVC references in kunit tests
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Hellstrom <thomas.hellstrom@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ZbIb7l0EhpVp5cXE@fedora
Sync initialization and calibration routines with MediaTek's reference
driver. Improves compliance and resolves link stability issues with
CH340 IoT devices connected to MT798x built-in PHYs.
Fixes: 98c485eaf509 ("net: phy: add driver for MediaTek SoC built-in GE PHYs")
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Link: https://lore.kernel.org/r/f2195279c234c0f618946424b8236026126bc595.1706071311.git.daniel@makrotopia.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Set DMA coherent mask to 32-bit which makes PPE offloading engine start
working on BPi-R4 which got 4 GiB of RAM.
Fixes: 2d75891ebc09 ("net: ethernet: mtk_eth_soc: support 36-bit DMA addressing on MT7988")
Suggested-by: Elad Yifee <eladwf@users.github.com>
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Link: https://lore.kernel.org/r/97e90925368b405f0974b9b15f1b7377c4a329ad.1706113251.git.daniel@makrotopia.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Louis Peens says:
====================
nfp: flower: a few small conntrack offload fixes
This small series addresses two bugs in the nfp conntrack offloading
code.
The first patch is a check to prevent offloading for a case which is
currently not supported by the nfp.
The second patch fixes up parsing of layer4 mangling code so it can be
correctly offloaded. Since the masks are an inverse mask and we are
shifting it so it can be packed together with the destination we
effectively need to 'clear' the lower bits of the mask by setting it to
0xFFFF.
====================
Link: https://lore.kernel.org/r/20240124151909.31603-1-louis.peens@corigine.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The nfp driver will merge the tp source port and tp destination port
into one dword which the offset must be zero to do hardware offload.
However, the mangle action for the tp source port and tp destination
port is separated for tc ct action. Modify the mangle action for the
FLOW_ACT_MANGLE_HDR_TYPE_TCP and FLOW_ACT_MANGLE_HDR_TYPE_UDP to
satisfy the nfp driver offload check for the tp port.
The mangle action provides a 4B value for source, and a 4B value for
the destination, but only 2B of each contains the useful information.
For offload the 2B of each is combined into a single 4B word. Since the
incoming mask for the source is '0xFFFF<mask>' the shift-left will
throw away the 0xFFFF part. When this gets combined together in the
offload it will clear the destination field. Fix this by setting the
lower bits back to 0xFFFF, effectively doing a rotate-left operation on
the mask.
Fixes: 5cee92c6f57a ("nfp: flower: support hw offload for ct nat action")
CC: stable@vger.kernel.org # 6.1+
Signed-off-by: Hui Zhou <hui.zhou@corigine.com>
Signed-off-by: Louis Peens <louis.peens@corigine.com>
Link: https://lore.kernel.org/r/20240124151909.31603-3-louis.peens@corigine.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The nfp offload flow pay will not allocate a mask id when the out port
is openvswitch internal port. This is because these flows are used to
configure the pre_tun table and are never actually send to the firmware
as an add-flow message. When a tc rule which action contains ct and
the post ct entry's out port is openvswitch internal port, the merge
offload flow pay with the wrong mask id of 0 will be send to the
firmware. Actually, the nfp can not support hardware offload for this
situation, so return EOPNOTSUPP.
Fixes: bd0fe7f96a3c ("nfp: flower-ct: add zone table entry when handling pre/post_ct flows")
CC: stable@vger.kernel.org # 5.14+
Signed-off-by: Hui Zhou <hui.zhou@corigine.com>
Signed-off-by: Louis Peens <louis.peens@corigine.com>
Link: https://lore.kernel.org/r/20240124151909.31603-2-louis.peens@corigine.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
For a skb frag with a newly allocated copy page, the true size is
incorrectly set to packet buffer size. It should be set to PAGE_SIZE
instead.
Fixes: 82fd151d38d9 ("gve: Reduce alloc and copy costs in the GQ rx path")
Signed-off-by: Praveen Kaligineedi <pkaligineedi@google.com>
Link: https://lore.kernel.org/r/20240124161025.1819836-1-pkaligineedi@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The busywait timeout value is a millisecond, not a second. So the
current setting 2 is too small. On slow/busy host (or VMs) the
current timeout can expire even on "correct" execution, causing random
failures. Let's copy the WAIT_TIMEOUT from forwarding/lib.sh and set
BUSYWAIT_TIMEOUT here.
Fixes: 25ae948b4478 ("selftests/net: add lib.sh")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240124061344.1864484-1-liuhangbin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add a new helper, bch2_hash_lookup_in_snapshot(), for when we're not
operating in a subvolume and already have a snapshot ID, and then use it
in lookup_lostfound() -> __lookup_dirent().
This is a bugfix - lookup_lostfound() doesn't take a subvolume ID, we
were passing a nonsense subvolume ID before, and don't have one to pass
since we may be operating in an interior snapshot node that doesn't have
a subvolume ID.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
The default timeout for tests is 45sec, bench-lookups_ipv6
seems to take around 50sec when running in a VM without
HW acceleration. Give it a 2x margin and set the timeout
to 120sec.
Fixes: d1066c9c58d4 ("selftests/net: Add test/benchmark for removing MKTs")
Reviewed-by: Dmitry Safonov <0x7f454c46@gmail.com>
Link: https://lore.kernel.org/r/20240124233630.1977708-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Paolo Abeni says:
====================
selftests: net: a few fixes
This series address self-tests failures for udp gro-related tests.
The first patch addresses the main problem I observe locally - the XDP
program required by such tests, xdp_dummy, is currently build in the
ebpf self-tests directory, not available if/when the user targets net
only. Arguably is more a refactor than a fix, but still targeting net
to hopefully
The second patch fixes the integration of such tests with the build
system.
Patch 3/3 fixes sporadic failures due to races.
Tested with:
make -C tools/testing/selftests/ TARGETS=net install
./tools/testing/selftests/kselftest_install/run_kselftest.sh \
-t "net:udpgro_bench.sh net:udpgro.sh net:udpgro_fwd.sh \
net:udpgro_frglist.sh net:veth.sh"
no failures.
====================
Link: https://lore.kernel.org/r/cover.1706131762.git.pabeni@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The UDP GRO forwarding test still hard-code an arbitrary pause
to wait for the UDP listener becoming ready in background.
That causes sporadic failures depending on the host load.
Replace the sleep with the existing helper waiting for the desired
port being exposed.
Fixes: a062260a9d5f ("selftests: net: add UDP GRO forwarding self-tests")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/4d58900fb09cef42749cfcf2ad7f4b91a97d225c.1706131762.git.pabeni@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The blamed commit below introduce a dependency in some net self-tests
towards a newly introduce helper script.
Such script is currently not included into the TEST_PROGS_EXTENDED list
and thus is not installed, causing failure for the relevant tests when
executed from the install dir.
Fix the issue updating the install targets.
Fixes: 3bdd9fd29cb0 ("selftests/net: synchronize udpgro tests' tx and rx connection")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/076e8758e21ff2061cc9f81640e7858df775f0a9.1706131762.git.pabeni@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Several net tests requires an XDP program build under the ebpf
directory, and error out if such program is not available.
That makes running successful net test hard, let's duplicate into the
net dir the [very small] program, re-using the existing rules to build
it, and finally dropping the bogus dependency.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/28e7af7c031557f691dc8045ee41dd549dd5e74c.1706131762.git.pabeni@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Still a bit unclear whether each directory should have its own
config file, but assuming they should lets add one for tcp_ao.
The following tests still fail with this config in place:
- rst_ipv4,
- rst_ipv6,
- bench-lookups_ipv6.
other 21 pass.
Fixes: d11301f65977 ("selftests/net: Add TCP-AO ICMPs accept test")
Reviewed-by: Dmitry Safonov <0x7f454c46@gmail.com>
Link: https://lore.kernel.org/r/20240124192550.1865743-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In __spi_pump_transfer_message(), the message was not finalized in the
first error return as it is in the other error return paths. Not
finalizing the message could cause anything waiting on the message to
complete to hang forever.
This adds the missing call to spi_finalize_current_message().
Fixes: ae7d2346dc89 ("spi: Don't use the message queue if possible in spi_sync")
Signed-off-by: David Lechner <dlechner@baylibre.com>
Link: https://msgid.link/r/20240125205312.3458541-2-dlechner@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
[Why]
IPS was temporary disabled due to instability.
It was fixed in dmub firmware and with:
- "drm/amd/display: Add IPS checks before dcn register access"
- "drm/amd/display: Disable ips before dc interrupt setting"
[How]
Enable IPS by default.
Disable IPS if 0x800 bit set in amdgpu.dcdebugmask module params
Signed-off-by: Roman Li <Roman.Li@amd.com>
Tested-by: Mark Broadworth <mark.broadworth@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For debugging IPS-related issues, expose a new debug mask
that allows to disable IPS.
Usage:
amdgpu.dcdebugmask=0x800
Signed-off-by: Roman Li <Roman.Li@amd.com>
Tested-by: Mark Broadworth <mark.broadworth@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
While in IPS2 an access to dcn registers is not allowed.
If interrupt results in dc call, we should disable IPS.
[How]
Safeguard register access in IPS2 by disabling idle optimization
before calling dc interrupt setting api.
Signed-off-by: Roman Li <Roman.Li@amd.com>
Tested-by: Mark Broadworth <mark.broadworth@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Because ABM will wait VStart to start getting histogram data,
it will cause we can't enter IPS while full screnn video playing.
[How]
Modify the panel refresh rate to the maximun multiple of current
refresh rate.
Reviewed-by: Dennis Chan <dennis.chan@amd.com>
Acked-by: Roman Li <roman.li@amd.com>
Signed-off-by: ChunTao Tso <chuntao.tso@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
With IPS enabled a system hangs once PSR is active.
PSR active triggers transition to IPS2 state.
While in IPS2 an access to dcn registers results in hard hang.
Existing check doesn't cover for PSR sequence.
[How]
Safeguard register access by disabling idle optimization in atomic commit
and crtc scanout. It will be re-enabled on next vblank.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Roman Li <roman.li@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
- Introduce a new Replay mode for DMUB version 0.0.199.0
Reviewed-by: Martin Leung <martin.leung@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alvin Lee <alvin.lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
Add regkey to block video playback in IPS2 by default
Allow idle optimizations in the same spot we allow Replay for
video playback usecases.
Avoid sending it when there's an external display connected by
modifying the allow idle checks to check for active non-eDP screens.
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This needs to be set to 1 to avoid a potential deadlock in
the GC 10.x and newer. On GC 9.x and older, this needs
to be set to 0. This can lead to hangs in some mixed
graphics and compute workloads. Updated firmware is also
required for AQL.
Reviewed-by: Feifei Xu <Feifei.Xu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
This needs to be set to 1 to avoid a potential deadlock in
the GC 10.x and newer. On GC 9.x and older, this needs
to be set to 0. This can lead to hangs in some mixed
graphics and compute workloads. Updated firmware is also
required for AQL.
Reviewed-by: Feifei Xu <Feifei.Xu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
This allows kernel mapped pages like the PDB and PTB to be
read via the iomem debugfs when there is no vram in the system.
Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.7.x
Power limit of SMUv13.0.6 SOCs can be updated by out-of-band ways. Fetch
the limit from firmware instead of using cached values.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.7.x
amdgpu_reg_state_sysfs_fini could be invoked at the
time when asic_func is even not initialized, i.e.,
amdgpu_discovery_init fails for some reason.
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Ony if vram vendor info is available, show in sysfs.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.7.x
update the power cap setting for smu_v13.0.0/smu_v13.0.7
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2356
Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
For GFX 9.4.3 APUs, the current method of fetching vram vendor
information is not reliable. Avoid fetching the information.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.7.x
The power source flag should be updated when
[1] System receives an interrupt indicating that the power source
has changed.
[2] System resumes from suspend or runtime suspend
Signed-off-by: Ma Jun <Jun.Ma2@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
The 'status' variable in 'core_link_read_dpcd()' &
'core_link_write_dpcd()' was uninitialized.
Thus, initializing 'status' variable to 'DC_ERROR_UNEXPECTED' by default.
Fixes the below:
drivers/gpu/drm/amd/amdgpu/../display/dc/link/protocols/link_dpcd.c:226 core_link_read_dpcd() error: uninitialized symbol 'status'.
drivers/gpu/drm/amd/amdgpu/../display/dc/link/protocols/link_dpcd.c:248 core_link_write_dpcd() error: uninitialized symbol 'status'.
Cc: stable@vger.kernel.org
Cc: Jerry Zuo <jerry.zuo@amd.com>
Cc: Jun Lei <Jun.Lei@amd.com>
Cc: Wayne Lin <Wayne.Lin@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
update smu v13.0.6 message to allow guest driver set gfx clock.
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Current release - regressions:
- bpf: fix a kernel crash for the riscv 64 JIT
- bnxt_en: fix memory leak in bnxt_hwrm_get_rings()
- revert "net: macsec: use skb_ensure_writable_head_tail to expand the skb"
Previous releases - regressions:
- core: fix removing a namespace with conflicting altnames
- tc/flower: fix chain template offload memory leak
- tcp:
- make sure init the accept_queue's spinlocks once
- fix autocork on CPUs with weak memory model
- udp: fix busy polling
- mlx5e:
- fix out-of-bound read in port timestamping
- fix peer flow lists corruption
- iwlwifi: fix a memory corruption
Previous releases - always broken:
- netfilter:
- nft_chain_filter: handle NETDEV_UNREGISTER for inet/ingress basechain
- nft_limit: reject configurations that cause integer overflow
- bpf: fix bpf_xdp_adjust_tail() with XSK zero-copy mbuf, avoiding
a NULL pointer dereference upon shrinking
- llc: make llc_ui_sendmsg() more robust against bonding changes
- smc: fix illegal rmb_desc access in SMC-D connection dump
- dpll: fix pin dump crash for rebound module
- bnxt_en: fix possible crash after creating sw mqprio TCs
- hv_netvsc: calculate correct ring size when PAGE_SIZE is not 4 Kbytes
Misc:
- several self-tests fixes for better integration with the netdev CI
- added several missing modules descriptions
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----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=ER+y
-----END PGP SIGNATURE-----
Merge tag 'net-6.8-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from bpf, netfilter and WiFi.
Jakub is doing a lot of work to include the self-tests in our CI, as a
result a significant amount of self-tests related fixes is flowing in
(and will likely continue in the next few weeks).
Current release - regressions:
- bpf: fix a kernel crash for the riscv 64 JIT
- bnxt_en: fix memory leak in bnxt_hwrm_get_rings()
- revert "net: macsec: use skb_ensure_writable_head_tail to expand
the skb"
Previous releases - regressions:
- core: fix removing a namespace with conflicting altnames
- tc/flower: fix chain template offload memory leak
- tcp:
- make sure init the accept_queue's spinlocks once
- fix autocork on CPUs with weak memory model
- udp: fix busy polling
- mlx5e:
- fix out-of-bound read in port timestamping
- fix peer flow lists corruption
- iwlwifi: fix a memory corruption
Previous releases - always broken:
- netfilter:
- nft_chain_filter: handle NETDEV_UNREGISTER for inet/ingress
basechain
- nft_limit: reject configurations that cause integer overflow
- bpf: fix bpf_xdp_adjust_tail() with XSK zero-copy mbuf, avoiding a
NULL pointer dereference upon shrinking
- llc: make llc_ui_sendmsg() more robust against bonding changes
- smc: fix illegal rmb_desc access in SMC-D connection dump
- dpll: fix pin dump crash for rebound module
- bnxt_en: fix possible crash after creating sw mqprio TCs
- hv_netvsc: calculate correct ring size when PAGE_SIZE is not 4kB
Misc:
- several self-tests fixes for better integration with the netdev CI
- added several missing modules descriptions"
* tag 'net-6.8-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (88 commits)
tsnep: Fix XDP_RING_NEED_WAKEUP for empty fill ring
tsnep: Remove FCS for XDP data path
net: fec: fix the unhandled context fault from smmu
selftests: bonding: do not test arp/ns target with mode balance-alb/tlb
fjes: fix memleaks in fjes_hw_setup
i40e: update xdp_rxq_info::frag_size for ZC enabled Rx queue
i40e: set xdp_rxq_info::frag_size
xdp: reflect tail increase for MEM_TYPE_XSK_BUFF_POOL
ice: update xdp_rxq_info::frag_size for ZC enabled Rx queue
intel: xsk: initialize skb_frag_t::bv_offset in ZC drivers
ice: remove redundant xdp_rxq_info registration
i40e: handle multi-buffer packets that are shrunk by xdp prog
ice: work on pre-XDP prog frag count
xsk: fix usage of multi-buffer BPF helpers for ZC XDP
xsk: make xsk_buff_pool responsible for clearing xdp_buff::flags
xsk: recycle buffer in case Rx queue was full
net: fill in MODULE_DESCRIPTION()s for rvu_mbox
net: fill in MODULE_DESCRIPTION()s for litex
net: fill in MODULE_DESCRIPTION()s for fsl_pq_mdio
net: fill in MODULE_DESCRIPTION()s for fec
...
