IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
VGA_IS1_RC is the color mode register (VGA_IS1_RM the one for monochrome
mode, note C vs. M at the end). So when using VGA_IS1_RC make sure the
vga device is actually in color mode and set the corresponding bit in the
misc register.
Reproducible when booting VMs in UEFI mode with some edk2 versions (edk2
fix is on the way too). Doesn't happen in BIOS mode because in that
case the vgabios already flips the bit.
Fixes: 250e743915d4 ("drm/bochs: Add screen blanking support")
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: http://patchwork.freedesktop.org/patch/msgid/20220906142957.2763577-1-kraxel@redhat.com
Update XRGB8888-to-MONO conversion to support struct iosys_map
and convert all users. Although these are single-plane color formats,
the new interface supports multi-plane formats for consistency with
drm_fb_blit().
v2:
* rebase after renaming CMA helpers to DMA helpers
* update documentation (Sam)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Tested-by: Noralf Trønnes <noralf@tronnes.org>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220808125406.20752-13-tzimmermann@suse.de
Update XRGB8888-to-GRAY8 conversion to support struct iosys_map
and convert all users. Although these are single-plane color formats,
the new interface supports multi-plane formats for consistency with
drm_fb_blit().
v2:
* update documentation (Sam)
* add TODO on vaddr location (Sam)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Tested-by: Noralf Trønnes <noralf@tronnes.org>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220808125406.20752-12-tzimmermann@suse.de
Update XRGB8888-to-RGB888 conversion to support struct iosys_map
and convert all users. Although these are single-plane color formats,
the new interface supports multi-plane formats for consistency with
drm_fb_blit().
v2:
* update documentation (Sam)
* add TODO on vaddr location (Sam)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220808125406.20752-8-tzimmermann@suse.de
Update XRGB8888-to-RGB565 conversion to support struct iosys_map
and convert all users. Although these are single-plane color formats,
the new interface supports multi-plane formats for consistency with
drm_fb_blit().
v2:
* update new Kunit tests
* update documentation (Sam)
* add TODO on vaddr location (Sam)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Tested-by: Noralf Trønnes <noralf@tronnes.org>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220808125406.20752-7-tzimmermann@suse.de
Merge drm_fb_memcpy() and drm_fb_memcpy_toio() into a drm_fb_memcpy()
that uses struct iosys_map for buffers. The new function also supports
multi-plane color formats. Convert all users of the original helpers.
v2:
* rebase onto refactored mgag200
* use drm_formap_info_bpp() (Sam)
* do static init in hyperv and mgag200 (Sam)
* update documentation (Sam)
* add TODO on vaddr location (Sam)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220808125406.20752-4-tzimmermann@suse.de
Provide drm_fb_blit() that works with struct iosys_map. Update all
users of drm_fb_blit_toio(), which required a destination buffer in
I/O memory.
This patch only updates the function's interface. The implementation
still relies on the destination buffer to be located in I/O memory.
See the follow-up patches for implementational changes. The new
function's interface works with multi-plane color formats, but again
implementation only supports a single plane for now.
v2:
* rebase onto refactored simpledrm
* use IOSYS_MAP_INIT_VADDR() (Sam)
* update the commit message on the use of I/O memory (Sam)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220808125406.20752-3-tzimmermann@suse.de
Replace the simple-KMS helpers with the regular atomic helpers. The
regular helpers are better architectured and therefore allow for easier
code sharing among drivers. No functional changes.
v3:
* remove empty CRTC helpers atomic_{enable, disable} (Javier)
* unconditionally run drm_atomic_helper_check_plane_state()
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220801135028.30647-6-tzimmermann@suse.de
Compute the framebuffer's scanline stride length if not given by
the simplefb data.
v3:
* get pixel size from drm_format_info_bpp() (Geert, Javier)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220801135028.30647-5-tzimmermann@suse.de
Inline the helpers for initializing the hardware FB, the memory
management and the modesetting into the device-creation function.
No functional changes.
In the original code, init helpers depended on values from other
init helpers. Inlining the functions ensures that steps are taken
in the correct order. It's also easier to see what happens. The
device is simple enough to be set up in one function. Only clocks
and regulators are still set up in their own helpers, as their
presence is system dependent.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220801135028.30647-3-tzimmermann@suse.de
When booting a kernel compiled with clang's CFI protection
(CONFIG_CFI_CLANG), there is a CFI failure in
drm_simple_kms_crtc_mode_valid() when trying to call
simpledrm_simple_display_pipe_mode_valid() through ->mode_valid():
[ 0.322802] CFI failure (target: simpledrm_simple_display_pipe_mode_valid+0x0/0x8):
...
[ 0.324928] Call trace:
[ 0.324969] __ubsan_handle_cfi_check_fail+0x58/0x60
[ 0.325053] __cfi_check_fail+0x3c/0x44
[ 0.325120] __cfi_slowpath_diag+0x178/0x200
[ 0.325192] drm_simple_kms_crtc_mode_valid+0x58/0x80
[ 0.325279] __drm_helper_update_and_validate+0x31c/0x464
...
The ->mode_valid() member in 'struct drm_simple_display_pipe_funcs'
expects a return type of 'enum drm_mode_status', not 'int'. Correct it
to fix the CFI failure.
Cc: stable@vger.kernel.org
Fixes: 11e8f5fd223b ("drm: Add simpledrm driver")
Link: https://github.com/ClangBuiltLinux/linux/issues/1647
Reported-by: Tomasz Paweł Gajc <tpgxyz@gmail.com>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sami Tolvanen <samitolvanen@google.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220725233629.223223-1-nathan@kernel.org
(cherry picked from commit 0c09bc33aa8e9dc867300acaadc318c2f0d85a1e)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
The field paddr of struct drm_gem_dma_object holds a DMA address, which
might actually be a physical address. However, depending on the platform,
it can also be a bus address or a virtual address managed by an IOMMU.
Hence, rename the field to dma_addr, which is more applicable.
In order to do this renaming the following coccinelle script was used:
```
@@
struct drm_gem_dma_object *gem;
@@
- gem->paddr
+ gem->dma_addr
@@
struct drm_gem_dma_object gem;
@@
- gem.paddr
+ gem.dma_addr
@exists@
typedef dma_addr_t;
symbol paddr;
@@
dma_addr_t paddr;
<...
- paddr
+ dma_addr
...>
@@
symbol paddr;
@@
dma_addr_t
- paddr
+ dma_addr
;
```
This patch is compile-time tested with:
```
make ARCH={x86_64,arm,arm64} allyesconfig
make ARCH={x86_64,arm,arm64} drivers/gpu/drm`
```
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Suggested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Danilo Krummrich <dakr@redhat.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220802000405.949236-5-dakr@redhat.com
Rename "GEM CMA" helpers to "GEM DMA" helpers - considering the
hierarchy of APIs (mm/cma -> dma -> gem dma) calling them "GEM
DMA" seems to be more applicable.
Besides that, commit e57924d4ae80 ("drm/doc: Task to rename CMA helpers")
requests to rename the CMA helpers and implies that people seem to be
confused about the naming.
In order to do this renaming the following script was used:
```
#!/bin/bash
DIRS="drivers/gpu include/drm Documentation/gpu"
REGEX_SYM_UPPER="[0-9A-Z_\-]"
REGEX_SYM_LOWER="[0-9a-z_\-]"
REGEX_GREP_UPPER="(${REGEX_SYM_UPPER}*)(GEM)_CMA_(${REGEX_SYM_UPPER}*)"
REGEX_GREP_LOWER="(${REGEX_SYM_LOWER}*)(gem)_cma_(${REGEX_SYM_LOWER}*)"
REGEX_SED_UPPER="s/${REGEX_GREP_UPPER}/\1\2_DMA_\3/g"
REGEX_SED_LOWER="s/${REGEX_GREP_LOWER}/\1\2_dma_\3/g"
# Find all upper case 'CMA' symbols and replace them with 'DMA'.
for ff in $(grep -REHl "${REGEX_GREP_UPPER}" $DIRS)
do
sed -i -E "$REGEX_SED_UPPER" $ff
done
# Find all lower case 'cma' symbols and replace them with 'dma'.
for ff in $(grep -REHl "${REGEX_GREP_LOWER}" $DIRS)
do
sed -i -E "$REGEX_SED_LOWER" $ff
done
# Replace all occurrences of 'CMA' / 'cma' in comments and
# documentation files with 'DMA' / 'dma'.
for ff in $(grep -RiHl " cma " $DIRS)
do
sed -i -E "s/ cma / dma /g" $ff
sed -i -E "s/ CMA / DMA /g" $ff
done
# Rename all 'cma_obj's to 'dma_obj'.
for ff in $(grep -RiHl "cma_obj" $DIRS)
do
sed -i -E "s/cma_obj/dma_obj/g" $ff
done
```
Only a few more manual modifications were needed, e.g. reverting the
following modifications in some DRM Kconfig files
- select CMA if HAVE_DMA_CONTIGUOUS
+ select DMA if HAVE_DMA_CONTIGUOUS
as well as manually picking the occurrences of 'CMA'/'cma' in comments and
documentation which relate to "GEM CMA", but not "FB CMA".
Also drivers/gpu/drm/Makefile was fixed up manually after renaming
drm_gem_cma_helper.c to drm_gem_dma_helper.c.
This patch is compile-time tested building a x86_64 kernel with
`make allyesconfig && make drivers/gpu/drm`.
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Danilo Krummrich <dakr@redhat.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com> #drivers/gpu/drm/arm
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220802000405.949236-4-dakr@redhat.com
Rename "FB CMA" helpers to "FB DMA" helpers - considering the hierarchy
of APIs (mm/cma -> dma -> fb dma) calling them "FB DMA" seems to be
more applicable.
Besides that, commit e57924d4ae80 ("drm/doc: Task to rename CMA helpers")
requests to rename the CMA helpers and implies that people seem to be
confused about the naming.
In order to do this renaming the following script was used:
```
#!/bin/bash
DIRS="drivers/gpu include/drm Documentation/gpu"
REGEX_SYM_UPPER="[0-9A-Z_\-]"
REGEX_SYM_LOWER="[0-9a-z_\-]"
REGEX_GREP_UPPER="(${REGEX_SYM_UPPER}*)(FB)_CMA_(${REGEX_SYM_UPPER}*)"
REGEX_GREP_LOWER="(${REGEX_SYM_LOWER}*)(fb)_cma_(${REGEX_SYM_LOWER}*)"
REGEX_SED_UPPER="s/${REGEX_GREP_UPPER}/\1\2_DMA_\3/g"
REGEX_SED_LOWER="s/${REGEX_GREP_LOWER}/\1\2_dma_\3/g"
# Find all upper case 'CMA' symbols and replace them with 'DMA'.
for ff in $(grep -REHl "${REGEX_GREP_UPPER}" $DIRS)
do
sed -i -E "$REGEX_SED_UPPER" $ff
done
# Find all lower case 'cma' symbols and replace them with 'dma'.
for ff in $(grep -REHl "${REGEX_GREP_LOWER}" $DIRS)
do
sed -i -E "$REGEX_SED_LOWER" $ff
done
# Replace all occurrences of 'CMA' / 'cma' in comments and
# documentation files with 'DMA' / 'dma'.
for ff in $(grep -RiHl " cma " $DIRS)
do
sed -i -E "s/ cma / dma /g" $ff
sed -i -E "s/ CMA / DMA /g" $ff
done
```
Only a few more manual modifications were needed, e.g. reverting the
following modifications in some DRM Kconfig files
- select CMA if HAVE_DMA_CONTIGUOUS
+ select DMA if HAVE_DMA_CONTIGUOUS
as well as manually picking the occurrences of 'CMA'/'cma' in comments and
documentation which relate to "FB CMA", but not "GEM CMA".
This patch is compile-time tested building a x86_64 kernel with
`make allyesconfig && make drivers/gpu/drm`.
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Danilo Krummrich <dakr@redhat.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com> #drivers/gpu/drm/arm
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220802000405.949236-3-dakr@redhat.com
The remove() function calls bochs_hw_fini() but this function is not called
in the error handling of the probe.
This call releases the resources allocated by bochs_hw_init() used in
bochs_load().
Update the probe and bochs_load() to call bochs_hw_fini() if an error
occurs after a successful bochs_hw_init() call.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: http://patchwork.freedesktop.org/patch/msgid/0e676e4d56ab5b10fcf22860081414445611dfa7.1655565953.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Implement DRM's aperture helpers under video/ for sharing with other
sub-systems. Remove DRM-isms from the interface. The helpers track
the ownership of framebuffer apertures and provide hand-over from
firmware, such as EFI and VESA, to native graphics drivers.
Other subsystems, such as fbdev and vfio, also have to maintain ownership
of framebuffer apertures. Moving DRM's aperture helpers to a more public
location allows all subsystems to interact with each other and share a
common implementation.
The aperture helpers are selected by the various firmware drivers within
DRM and fbdev, and the VGA text-console driver.
The original DRM interface is kept in place for use by DRM drivers.
v3:
* prefix all interfaces with aperture_ (Javier)
* rework and simplify documentation (Javier)
* rename struct dev_aperture to struct aperture_range
* rebase onto latest DRM
* update MAINTAINERS entry
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220622140134.12763-3-tzimmermann@suse.de
drm_crtc.h has no need for drm_frambuffer.h, so don't include it.
Avoids useless rebuilds of the entire universe when
touching drm_framebuffer.h.
Quite a few placs do currently depend on drm_framebuffer.h without
actually including it directly. All of those need to be fixed
up.
v2: Fix up msm some more
v2: Deal with ingenic and shmobile as well
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220614095449.29311-1-ville.syrjala@linux.intel.com
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Jani Nikula <jani.nikula@intel.com>
drm_crtc.h has no need for drm_edid.h, so don't include it.
Avoids useless rebuilds of the entire universe when
touching drm_edid.h.
Quite a few placs do currently depend on drm_edid.h without
actually including it directly. All of those need to be fixed
up.
v2: Fix up i915 and msm some more
v3: Fix alphabetical ordering (Sam)
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220614090245.30283-1-ville.syrjala@linux.intel.com
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Jani Nikula <jani.nikula@intel.com>
The SPI core always reports a "MODALIAS=spi:<foo>", even if the device was
registered via OF. This means that the st7735r.ko module won't autoload if
a DT has a node with a compatible "okaya,rh128128t" string.
In that case, kmod expects a "MODALIAS=of:N*T*Cokaya,rh128128t" uevent but
instead will get a "MODALIAS=spi:rh128128t", which is not present in the
list of aliases:
$ modinfo drivers/gpu/drm/tiny/st7735r.ko | grep alias
alias: of:N*T*Cokaya,rh128128tC*
alias: of:N*T*Cokaya,rh128128t
alias: of:N*T*Cjianda,jd-t18003-t01C*
alias: of:N*T*Cjianda,jd-t18003-t01
alias: spi:jd-t18003-t01
To workaround this issue, add in the SPI table an entry for that device.
Fixes: d1d511d516f7 ("drm: tiny: st7735r: Add support for Okaya RH128128T")
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: David Lechner <david@lechnology.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220520091602.179078-1-javierm@redhat.com
Don't select shadow buffering for the fbdev console explicitly. The
fbdev emulation's heuristic will enable it for any framebuffer with
.dirty callback.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220303205839.28484-2-tzimmermann@suse.de
dma-buf:
- rename dma-buf-map to iosys-map
core:
- move buddy allocator to core
- add pci/platform init macros
- improve EDID parser deep color handling
- EDID timing type 7 support
- add GPD Win Max quirk
- add yes/no helpers to string_helpers
- flatten syncobj chains
- add nomodeset support to lots of drivers
- improve fb-helper clipping support
- add default property value interface
fbdev:
- improve fbdev ops speed
ttm:
- add a backpointer from ttm bo->ttm resource
dp:
- move displayport headers
- add a dp helper module
bridge:
- anx7625 atomic support, HDCP support
panel:
- split out panel-lvds and lvds bindings
- find panels in OF subnodes
privacy:
- add chromeos privacy screen support
fb:
- hot unplug fw fb on forced removal
simpledrm:
- request region instead of marking ioresource busy
- add panel oreintation property
udmabuf:
- fix oops with 0 pages
amdgpu:
- power management code cleanup
- Enable freesync video mode by default
- RAS code cleanup
- Improve VRAM access for debug using SDMA
- SR-IOV rework special register access and fixes
- profiling power state request ioctl
- expose IP discovery via sysfs
- Cyan skillfish updates
- GC 10.3.7, SDMA 5.2.7, DCN 3.1.6 updates
- expose benchmark tests via debugfs
- add module param to disable XGMI for testing
- GPU reset debugfs register dumping support
amdkfd:
- CRIU support
- SDMA queue fixes
radeon:
- UVD suspend fix
- iMac backlight fix
i915:
- minimal parallel submission for execlists
- DG2-G12 subplatform added
- DG2 programming workarounds
- DG2 accelerated migration support
- flat CCS and CCS engine support for XeHP
- initial small BAR support
- drop fake LMEM support
- ADL-N PCH support
- bigjoiner updates
- introduce VMA resources and async unbinding
- register definitions cleanups
- multi-FBC refactoring
- DG1 OPROM over SPI support
- ADL-N platform enabling
- opregion mailbox #5 support
- DP MST ESI improvements
- drm device based logging
- async flip optimisation for DG2
- CPU arch abstraction fixes
- improve GuC ADS init to work on aarch64
- tweak TTM LRU priority hint
- GuC 69.0.3 support
- remove short term execbuf pins
nouveau:
- higher DP/eDP bitrates
- backlight fixes
msm:
- dpu + dp support for sc8180x
- dp support for sm8350
- dpu + dsi support for qcm2290
- 10nm dsi phy tuning support
- bridge support for dp encoder
- gpu support for additional 7c3 SKUs
ingenic:
- HDMI support for JZ4780
- aux channel EDID support
ast:
- AST2600 support
- add wide screen support
- create DP/DVI connectors
omapdrm:
- fix implicit dma_buf fencing
vc4:
- add CSC + full range support
- better display firmware handoff
panfrost:
- add initial dual-core GPU support
stm:
- new revision support
- fb handover support
mediatek:
- transfer display binding document to yaml format.
- add mt8195 display device binding.
- allow commands to be sent during video mode.
- add wait_for_event for crtc disable by cmdq.
tegra:
- YUV format support
rcar-du:
- LVDS support for M3-W+ (R8A77961)
exynos:
- BGR pixel format for FIMD device
-----BEGIN PGP SIGNATURE-----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=uRsT
-----END PGP SIGNATURE-----
Merge tag 'drm-next-2022-03-24' of git://anongit.freedesktop.org/drm/drm
Pull drm updates from Dave Airlie:
"Lots of work all over, Intel improving DG2 support, amdkfd CRIU
support, msm new hw support, and faster fbdev support.
dma-buf:
- rename dma-buf-map to iosys-map
core:
- move buddy allocator to core
- add pci/platform init macros
- improve EDID parser deep color handling
- EDID timing type 7 support
- add GPD Win Max quirk
- add yes/no helpers to string_helpers
- flatten syncobj chains
- add nomodeset support to lots of drivers
- improve fb-helper clipping support
- add default property value interface
fbdev:
- improve fbdev ops speed
ttm:
- add a backpointer from ttm bo->ttm resource
dp:
- move displayport headers
- add a dp helper module
bridge:
- anx7625 atomic support, HDCP support
panel:
- split out panel-lvds and lvds bindings
- find panels in OF subnodes
privacy:
- add chromeos privacy screen support
fb:
- hot unplug fw fb on forced removal
simpledrm:
- request region instead of marking ioresource busy
- add panel oreintation property
udmabuf:
- fix oops with 0 pages
amdgpu:
- power management code cleanup
- Enable freesync video mode by default
- RAS code cleanup
- Improve VRAM access for debug using SDMA
- SR-IOV rework special register access and fixes
- profiling power state request ioctl
- expose IP discovery via sysfs
- Cyan skillfish updates
- GC 10.3.7, SDMA 5.2.7, DCN 3.1.6 updates
- expose benchmark tests via debugfs
- add module param to disable XGMI for testing
- GPU reset debugfs register dumping support
amdkfd:
- CRIU support
- SDMA queue fixes
radeon:
- UVD suspend fix
- iMac backlight fix
i915:
- minimal parallel submission for execlists
- DG2-G12 subplatform added
- DG2 programming workarounds
- DG2 accelerated migration support
- flat CCS and CCS engine support for XeHP
- initial small BAR support
- drop fake LMEM support
- ADL-N PCH support
- bigjoiner updates
- introduce VMA resources and async unbinding
- register definitions cleanups
- multi-FBC refactoring
- DG1 OPROM over SPI support
- ADL-N platform enabling
- opregion mailbox #5 support
- DP MST ESI improvements
- drm device based logging
- async flip optimisation for DG2
- CPU arch abstraction fixes
- improve GuC ADS init to work on aarch64
- tweak TTM LRU priority hint
- GuC 69.0.3 support
- remove short term execbuf pins
nouveau:
- higher DP/eDP bitrates
- backlight fixes
msm:
- dpu + dp support for sc8180x
- dp support for sm8350
- dpu + dsi support for qcm2290
- 10nm dsi phy tuning support
- bridge support for dp encoder
- gpu support for additional 7c3 SKUs
ingenic:
- HDMI support for JZ4780
- aux channel EDID support
ast:
- AST2600 support
- add wide screen support
- create DP/DVI connectors
omapdrm:
- fix implicit dma_buf fencing
vc4:
- add CSC + full range support
- better display firmware handoff
panfrost:
- add initial dual-core GPU support
stm:
- new revision support
- fb handover support
mediatek:
- transfer display binding document to yaml format.
- add mt8195 display device binding.
- allow commands to be sent during video mode.
- add wait_for_event for crtc disable by cmdq.
tegra:
- YUV format support
rcar-du:
- LVDS support for M3-W+ (R8A77961)
exynos:
- BGR pixel format for FIMD device"
* tag 'drm-next-2022-03-24' of git://anongit.freedesktop.org/drm/drm: (1529 commits)
drm/i915/display: Do not re-enable PSR after it was marked as not reliable
drm/i915/display: Fix HPD short pulse handling for eDP
drm/amdgpu: Use drm_mode_copy()
drm/radeon: Use drm_mode_copy()
drm/amdgpu: Use ternary operator in `vcn_v1_0_start()`
drm/amdgpu: Remove pointless on stack mode copies
drm/amd/pm: fix indenting in __smu_cmn_reg_print_error()
drm/amdgpu/dc: fix typos in comments
drm/amdgpu: fix typos in comments
drm/amd/pm: fix typos in comments
drm/amdgpu: Add stolen reserved memory for MI25 SRIOV.
drm/amdgpu: Merge get_reserved_allocation to get_vbios_allocations.
drm/amdkfd: evict svm bo worker handle error
drm/amdgpu/vcn: fix vcn ring test failure in igt reload test
drm/amdgpu: only allow secure submission on rings which support that
drm/amdgpu: fixed the warnings reported by kernel test robot
drm/amd/display: 3.2.177
drm/amd/display: [FW Promotion] Release 0.0.108.0
drm/amd/display: Add save/restore PANEL_PWRSEQ_REF_DIV2
drm/amd/display: Wait for hubp read line for Pollock
...
There is no "reversed" handling in drm_fb_xrgb8888_to_mono_reversed():
the function just converts from color to grayscale, and reduces the
number of grayscale levels from 256 to 2 (i.e. brightness 0-127 is
mapped to 0, 128-255 to 1). All "reversed" handling is done in the
repaper driver, where this function originated.
Hence make this clear by renaming drm_fb_xrgb8888_to_mono_reversed() to
drm_fb_xrgb8888_to_mono(), and documenting the black/white pixel
mapping.
Fixes: bcf8b616deb87941 ("drm/format-helper: Add drm_fb_xrgb8888_to_mono_reversed()")
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220317081830.1211400-2-geert@linux-m68k.org
UAPI Changes:
Cross-subsystem Changes:
- Improve performance of some fbdev ops, in some cases up to 6x faster.
Core Changes:
- Some small DP fixes.
- Find panels in subnodes of OF devices, and add of_get_drm_panel_display_mode
to retrieve mode.
- Add drm_object_property_get_default_value and use it for resetting
zpos in plane state reset, removing the need for individual drivers
to do it.
- Same for color encoding and color range props.
- Update panic handling todo doc.
- Add todo that format conversion helpers should be sped up similarly to fbdev ops.
Driver Changes:
- Add panel orientation property to simpledrm for quirked panels.
- Assorted small fixes to tiny/repaper, nouveau, stm, omap, ssd130x.
- Add crc support to stm/ltdc.
- Add MIPI DBI compatible SPI driver
- Assorted small fixes to tiny panels and bridge drivers.
- Add AST2600 support to aspeed.
-----BEGIN PGP SIGNATURE-----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=TVQP
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-next-2022-03-03' of git://anongit.freedesktop.org/drm/drm-misc into drm-next
drm-misc-next for v5.18:
UAPI Changes:
Cross-subsystem Changes:
- Improve performance of some fbdev ops, in some cases up to 6x faster.
Core Changes:
- Some small DP fixes.
- Find panels in subnodes of OF devices, and add of_get_drm_panel_display_mode
to retrieve mode.
- Add drm_object_property_get_default_value and use it for resetting
zpos in plane state reset, removing the need for individual drivers
to do it.
- Same for color encoding and color range props.
- Update panic handling todo doc.
- Add todo that format conversion helpers should be sped up similarly to fbdev ops.
Driver Changes:
- Add panel orientation property to simpledrm for quirked panels.
- Assorted small fixes to tiny/repaper, nouveau, stm, omap, ssd130x.
- Add crc support to stm/ltdc.
- Add MIPI DBI compatible SPI driver
- Assorted small fixes to tiny panels and bridge drivers.
- Add AST2600 support to aspeed.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/48fabd78-ade9-f80b-c724-13726c7be69e@linux.intel.com
Add a driver that will work with most MIPI DBI compatible SPI panels.
This avoids adding a driver for every new MIPI DBI compatible controller
that is to be used by Linux. The 'compatible' Device Tree property with
a '.bin' suffix will be used to load a firmware file that contains the
controller configuration.
Example (driver will load sainsmart18.bin):
display@0 {
compatible = "sainsmart18", "panel-mipi-dbi-spi";
...
};
v5:
- kconfig: s/DRM_KMS_CMA_HELPER/DRM_GEM_CMA_HELPER/ (Sam)
- kconfig: Add select VIDEOMODE_HELPERS (Sam)
- kconfig: Add wiki url in the description (Sam)
- Split out and use of_get_drm_panel_display_mode()(Sam)
- Only use the first compatible to look for a firmware file since the
binding mandates 2 compatibles.
- Make having a firmware file mandatory so we can print an error
message if it's missing to improve the user experience. It's very
unlikely that a controller doesn't need to be initialized and if
it doesn't, it's possible to have a firmware file containing only
a DCS NOP.
v4:
- Move driver to drm/tiny where the other drivers of its kind are located.
The driver module will not be shared with a future DPI driver after all.
v3:
- Move properties to DT (Maxime)
- The MIPI DPI spec has optional support for DPI where the controller is
configured over DBI. Rework the command functions so they can be moved
to drm_mipi_dbi and shared with a future panel-mipi-dpi-spi driver
v2:
- Drop model property and use compatible instead (Rob)
- Add wiki entry in MAINTAINERS
Acked-by: Maxime Ripard <maxime@cerno.tech>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20220227124713.39766-6-noralf@tronnes.org
UAPI Changes:
Cross-subsystem Changes:
- Split out panel-lvds and lvds dt bindings .
- Put yes/no on/off disabled/enabled strings in linux/string_helpers.h
and use it in drivers and tomoyo.
- Clarify dma_fence_chain and dma_fence_array should never include eachother.
- Flatten chains in syncobj's.
- Don't double add in fbdev/defio when page is already enlisted.
- Don't sort deferred-I/O pages by default in fbdev.
Core Changes:
- Fix missing pm_runtime_put_sync in bridge.
- Set modifier support to only linear fb modifier if drivers don't
advertise support.
- As a result, we remove allow_fb_modifiers.
- Add missing clear for EDID Deep Color Modes in drm_reset_display_info.
- Assorted documentation updates.
- Warn once in drm_clflush if there is no arch support.
- Add missing select for dp helper in drm_panel_edp.
- Assorted small fixes.
- Improve fb-helper's clipping handling.
- Don't dump shmem mmaps in a core dump.
- Add accounting to ttm resource manager, and use it in amdgpu.
- Allow querying the detected eDP panel through debugfs.
- Add helpers for xrgb8888 to 8 and 1 bits gray.
- Improve drm's buddy allocator.
- Add selftests for the buddy allocator.
Driver Changes:
- Add support for nomodeset to a lot of drm drivers.
- Use drm_module_*_driver in a lot of drm drivers.
- Assorted small fixes to bridge/lt9611, v3d, vc4, vmwgfx, mxsfb, nouveau,
bridge/dw-hdmi, panfrost, lima, ingenic, sprd, bridge/anx7625, ti-sn65dsi86.
- Add bridge/it6505.
- Create DP and DVI-I connectors in ast.
- Assorted nouveau backlight fixes.
- Rework amdgpu reset handling.
- Add dt bindings for ingenic,jz4780-dw-hdmi.
- Support reading edid through aux channel in ingenic.
- Add a drm driver for Solomon SSD130x OLED displays.
- Add simple support for sharp LQ140M1JW46.
- Add more panels to nt35560.
-----BEGIN PGP SIGNATURE-----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=HuwD
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-next-2022-02-23' of git://anongit.freedesktop.org/drm/drm-misc into drm-next
drm-misc-next for v5.18:
UAPI Changes:
Cross-subsystem Changes:
- Split out panel-lvds and lvds dt bindings .
- Put yes/no on/off disabled/enabled strings in linux/string_helpers.h
and use it in drivers and tomoyo.
- Clarify dma_fence_chain and dma_fence_array should never include eachother.
- Flatten chains in syncobj's.
- Don't double add in fbdev/defio when page is already enlisted.
- Don't sort deferred-I/O pages by default in fbdev.
Core Changes:
- Fix missing pm_runtime_put_sync in bridge.
- Set modifier support to only linear fb modifier if drivers don't
advertise support.
- As a result, we remove allow_fb_modifiers.
- Add missing clear for EDID Deep Color Modes in drm_reset_display_info.
- Assorted documentation updates.
- Warn once in drm_clflush if there is no arch support.
- Add missing select for dp helper in drm_panel_edp.
- Assorted small fixes.
- Improve fb-helper's clipping handling.
- Don't dump shmem mmaps in a core dump.
- Add accounting to ttm resource manager, and use it in amdgpu.
- Allow querying the detected eDP panel through debugfs.
- Add helpers for xrgb8888 to 8 and 1 bits gray.
- Improve drm's buddy allocator.
- Add selftests for the buddy allocator.
Driver Changes:
- Add support for nomodeset to a lot of drm drivers.
- Use drm_module_*_driver in a lot of drm drivers.
- Assorted small fixes to bridge/lt9611, v3d, vc4, vmwgfx, mxsfb, nouveau,
bridge/dw-hdmi, panfrost, lima, ingenic, sprd, bridge/anx7625, ti-sn65dsi86.
- Add bridge/it6505.
- Create DP and DVI-I connectors in ast.
- Assorted nouveau backlight fixes.
- Rework amdgpu reset handling.
- Add dt bindings for ingenic,jz4780-dw-hdmi.
- Support reading edid through aux channel in ingenic.
- Add a drm driver for Solomon SSD130x OLED displays.
- Add simple support for sharp LQ140M1JW46.
- Add more panels to nt35560.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/686ec871-e77f-c230-22e5-9e3bb80f064a@linux.intel.com
There is now a drm_fb_xrgb8888_to_mono_reversed() helper function to do
format conversion from XRGB8888 to reversed monochrome.
Use that helper and remove the open coded version in the repaper driver.
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Tested-by: Noralf Trønnes <noralf@tronnes.org>
Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220223193735.213185-1-javierm@redhat.com
Some devices use e.g. a portrait panel in a standard laptop casing made
for landscape panels. efifb calls drm_get_panel_orientation_quirk() and
sets fb_info.fbcon_rotate_hint to make fbcon rotate the console so that
it shows up-right instead of on its side.
When switching to simpledrm the fbcon renders on its side. Call the
drm_connector_set_panel_orientation_with_quirk() helper to add
a "panel orientation" property on devices listed in the quirk table,
to make the fbcon (and aware userspace apps) rotate the image to
display properly.
Cc: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20220221220045.11958-1-hdegoede@redhat.com
------------------------
dma-buf:
- dma-buf-map: Rename to iosys-map (Lucas)
Core Changes:
-------------
drm:
- Always include the debugfs_entry in drm_crtc (Ville)
- Add orientation quirk for GPD Win Max (Anisse)
Driver Changes:
---------------
gvt:
- Constify some pointers. (Rikard Falkeborn)
- Use list_entry to access list members. (Guenter Roeck)
- Fix cmd parser error for Passmark9. (Zhenyu Wang)
i915:
- Various clean-ups including headers and removing unused and unnecessary stuff\
(Jani, Hans, Andy, Ville)
- Cleaning up on our registers definitions i915_reg.h (Matt)
- More multi-FBC refactoring (Ville)
- Baytrail backlight fix (Hans)
- DG1 OPROM read through SPI controller (Clint)
- ADL-N platform enabling (Tejas)
- Fix slab-out-of-bounds access (Jani)
- Add opregion mailbox #5 support for possible EDID override (Anisse)
- Fix possible NULL dereferences (Harish)
- Updates and fixes around display voltage swing values (Clint, Jose)
- Fix RPM wekeref on PXP code (Juston)
- Many register definitions clean-up, including planes registers (Ville)
- More conversion towards display version over the old gen (Madhumitha, Ville)
- DP MST ESI handling improvements (Jani)
- drm device based logging conversions (Jani)
- Prevent divide by zero (Dan)
- Introduce ilk_pch_pre_enable for complete modeset abstraction (Ville)
- Async flip optimization for DG2 (Stanislav)
- Multiple DSC and bigjoiner fixes and improvements (Ville)
- Fix ADL-P TypeC Phy ready status readout (Imre)
- Fix up DP DFP 4:2:0 handling more display related fixes (Ville)
- Display M/N cleanup (Ville)
- Switch to use VGA definitions from video/vga.h (Jani)
- Fixes and improvements to abstract CPU architecture (Lucas)
- Disable unsused power wells left enabled by BIOS (Imre)
- Allow !join_mbus cases for adlp+ dbuf configuration (Ville)
- Populate pipe dbuf slices more accurately during readout (Ville)
- Workaround broken BIOS DBUF configuration on TGL/RKL (Ville)
- Fix trailing semicolon (Lucas)
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEbSBwaO7dZQkcLOKj+mJfZA7rE8oFAmIChLkACgkQ+mJfZA7r
E8rDOgf9GdgD5PIqly1zCjfpN0z15KXS6kn6lDlthcZMQ2INpAjfo7sOhpAdcb5h
ptoKkBxD0p+VlLWTR14+N1/DXV8lvxgdfbee2XHdG2+750eBjcjdYNakDj+lGZJ6
AVO5pNJRa6WEMd4pesm53CJMHlgSzydRCl66PobHrqqeHahO4VGh4Y9jqoJ3JzvD
unO1iWrss/i9HvJrefcrUKPGkpb9u59dzsiM9Q3rCNSsPg3ik7Mz1LLPEyHEHyUi
7vs8ugjN2UiZZELnMJIiCBwHs1xN0O3oS4YkjjTzZXMWc+cvY9mFpGbIWMffYpMY
qijXJLO8Fh57SN0G6EPaCjNyQbm8Gw==
=/7VU
-----END PGP SIGNATURE-----
Merge tag 'drm-intel-next-2022-02-08' of git://anongit.freedesktop.org/drm/drm-intel into drm-next
Cross-subsystem Changes:
------------------------
dma-buf:
- dma-buf-map: Rename to iosys-map (Lucas)
Core Changes:
-------------
drm:
- Always include the debugfs_entry in drm_crtc (Ville)
- Add orientation quirk for GPD Win Max (Anisse)
Driver Changes:
---------------
gvt:
- Constify some pointers. (Rikard Falkeborn)
- Use list_entry to access list members. (Guenter Roeck)
- Fix cmd parser error for Passmark9. (Zhenyu Wang)
i915:
- Various clean-ups including headers and removing unused and unnecessary stuff\
(Jani, Hans, Andy, Ville)
- Cleaning up on our registers definitions i915_reg.h (Matt)
- More multi-FBC refactoring (Ville)
- Baytrail backlight fix (Hans)
- DG1 OPROM read through SPI controller (Clint)
- ADL-N platform enabling (Tejas)
- Fix slab-out-of-bounds access (Jani)
- Add opregion mailbox #5 support for possible EDID override (Anisse)
- Fix possible NULL dereferences (Harish)
- Updates and fixes around display voltage swing values (Clint, Jose)
- Fix RPM wekeref on PXP code (Juston)
- Many register definitions clean-up, including planes registers (Ville)
- More conversion towards display version over the old gen (Madhumitha, Ville)
- DP MST ESI handling improvements (Jani)
- drm device based logging conversions (Jani)
- Prevent divide by zero (Dan)
- Introduce ilk_pch_pre_enable for complete modeset abstraction (Ville)
- Async flip optimization for DG2 (Stanislav)
- Multiple DSC and bigjoiner fixes and improvements (Ville)
- Fix ADL-P TypeC Phy ready status readout (Imre)
- Fix up DP DFP 4:2:0 handling more display related fixes (Ville)
- Display M/N cleanup (Ville)
- Switch to use VGA definitions from video/vga.h (Jani)
- Fixes and improvements to abstract CPU architecture (Lucas)
- Disable unsused power wells left enabled by BIOS (Imre)
- Allow !join_mbus cases for adlp+ dbuf configuration (Ville)
- Populate pipe dbuf slices more accurately during readout (Ville)
- Workaround broken BIOS DBUF configuration on TGL/RKL (Ville)
- Fix trailing semicolon (Lucas)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/YgKFLmCgpv4vQEa1@intel.com
The value returned by an spi driver's remove function is mostly ignored.
(Only an error message is printed if the value is non-zero that the
error is ignored.)
So change the prototype of the remove function to return no value. This
way driver authors are not tempted to assume that passing an error to
the upper layer is a good idea. All drivers are adapted accordingly.
There is no intended change of behaviour, all callbacks were prepared to
return 0 before.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Marc Kleine-Budde <mkl@pengutronix.de>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Acked-by: Miquel Raynal <miquel.raynal@bootlin.com>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: Claudius Heine <ch@denx.de>
Acked-by: Stefan Schmidt <stefan@datenfreihafen.org>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org> # For MMC
Acked-by: Marcus Folkesson <marcus.folkesson@gmail.com>
Acked-by: Łukasz Stelmach <l.stelmach@samsung.com>
Acked-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20220123175201.34839-6-u.kleine-koenig@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Rename struct dma_buf_map to struct iosys_map and corresponding APIs.
Over time dma-buf-map grew up to more functionality than the one used by
dma-buf: in fact it's just a shim layer to abstract system memory, that
can be accessed via regular load and store, from IO memory that needs to
be acessed via arch helpers.
The idea is to extend this API so it can fulfill other needs, internal
to a single driver. Example: in the i915 driver it's desired to share
the implementation for integrated graphics, which uses mostly system
memory, with discrete graphics, which may need to access IO memory.
The conversion was mostly done with the following semantic patch:
@r1@
@@
- struct dma_buf_map
+ struct iosys_map
@r2@
@@
(
- DMA_BUF_MAP_INIT_VADDR
+ IOSYS_MAP_INIT_VADDR
|
- dma_buf_map_set_vaddr
+ iosys_map_set_vaddr
|
- dma_buf_map_set_vaddr_iomem
+ iosys_map_set_vaddr_iomem
|
- dma_buf_map_is_equal
+ iosys_map_is_equal
|
- dma_buf_map_is_null
+ iosys_map_is_null
|
- dma_buf_map_is_set
+ iosys_map_is_set
|
- dma_buf_map_clear
+ iosys_map_clear
|
- dma_buf_map_memcpy_to
+ iosys_map_memcpy_to
|
- dma_buf_map_incr
+ iosys_map_incr
)
@@
@@
- #include <linux/dma-buf-map.h>
+ #include <linux/iosys-map.h>
Then some files had their includes adjusted and some comments were
update to remove mentions to dma-buf-map.
Since this is not specific to dma-buf anymore, move the documentation to
the "Bus-Independent Device Accesses" section.
v2:
- Squash patches
v3:
- Fix wrong removal of dma-buf.h from MAINTAINERS
- Move documentation from dma-buf.rst to device-io.rst
v4:
- Change documentation title and level
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Acked-by: Christian König <christian.koenig@amd.com>
Acked-by: Sumit Semwal <sumit.semwal@linaro.org>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20220204170541.829227-1-lucas.demarchi@intel.com
First backmerge into drm-misc-next. Required for more helpers backmerged,
and to pull in 5.17 (rc2).
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
UAPI Changes:
- Fix invalid IN_FORMATS blob when plane->format_mod_supported is NULL.
Cross-subsystem Changes:
- Assorted dt bindings updates.
- Fix vga16fb vga checking on x86.
- Fix extra semicolon in rwsem.h's _down_write_nest_lock.
- Assorted small fixes to agp and fbdev drivers.
- Fix oops in creating a udmabuf with 0 pages.
- Hot-unplug firmware fb devices on forced removal
- Reqquest memory region in simplefb and simpledrm, and don't make the ioresource as busy.
Core Changes:
- Mock a drm_plane in drm-plane-helper selftest.
- Assorted bug fixes to device logging, dbi.
- Use DP helper for sink count in mst.
- Assorted documentation fixes.
- Assorted small fixes.
- Move DP headers to drm/dp, and add a drm dp helper module.
- Move the buddy allocator from i915 to common drm.
- Add simple pci and platform module init macros to remove a lot of boilerplate from some drivers.
- Support microsoft extension for HMDs and specialized monitors.
- Improve edid parser's deep color handling.
- Add type 7 timing support to edid parser.
- Add a weak backpointer to the ttm_bo from ttm_resource
- Add 3 eDP panels.
Driver Changes:
- Add support for HDMI and JZ4780 to ingenic.
- Add support for higher DP/eDP bitrates to nouveau.
- Assorted driver fixes to tilcdc, vmwgfx, sn65dsi83, meson, stm, panfrost, v3d, gma500, vc4, virtio, mgag200, ast, radeon, amdgpu, nouveau, various bridge drivers.
- Convert and revert exynos dsi support to bridge driver.
- Add vcc supply regulator support for sn65dsi83.
- More conversion of bridge/chipone-icn6211 to atomic.
- Remove conflicting fb's from stm, and add support for new hw version.
- Add device link in parade-ps8640 to fix suspend/resume.
- Update Boe-tv110c9m init sequence.
- Add wide screen support to AST2600.
- Fix omapdrm implicit dma_buf fencing.
- Add support for multiple overlay planes to vkms.
- Convert bridge/anx7625 to atomic, add HDCP support,
add eld support for audio, and fix HPD.
- Add driver for ChromeOS privacy screen.
- Handover display from firmware to vc4 more gracefully, and support nomodeset.
- Add flexible and ycbcr pixel formats to stm/ltdc.
- Convert exynos mipi dsi to atomic.
- Add initial dual core group GPUs support to panfrost.
- No longer add exclusive fence in amdgpu as shared fence.
- Add CSC and full range supoprt to vc4.
- Shutdown the display on system shutdown and unbind.
- Add Multi-Inno Technology MI0700S4T-6 simple panel.
-----BEGIN PGP SIGNATURE-----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=IMtm
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-next-2022-01-27' of git://anongit.freedesktop.org/drm/drm-misc into drm-next
[airlied: add two missing Kconfig]
drm-misc-next for v5.18:
UAPI Changes:
- Fix invalid IN_FORMATS blob when plane->format_mod_supported is NULL.
Cross-subsystem Changes:
- Assorted dt bindings updates.
- Fix vga16fb vga checking on x86.
- Fix extra semicolon in rwsem.h's _down_write_nest_lock.
- Assorted small fixes to agp and fbdev drivers.
- Fix oops in creating a udmabuf with 0 pages.
- Hot-unplug firmware fb devices on forced removal
- Reqquest memory region in simplefb and simpledrm, and don't make the ioresource as busy.
Core Changes:
- Mock a drm_plane in drm-plane-helper selftest.
- Assorted bug fixes to device logging, dbi.
- Use DP helper for sink count in mst.
- Assorted documentation fixes.
- Assorted small fixes.
- Move DP headers to drm/dp, and add a drm dp helper module.
- Move the buddy allocator from i915 to common drm.
- Add simple pci and platform module init macros to remove a lot of boilerplate from some drivers.
- Support microsoft extension for HMDs and specialized monitors.
- Improve edid parser's deep color handling.
- Add type 7 timing support to edid parser.
- Add a weak backpointer to the ttm_bo from ttm_resource
- Add 3 eDP panels.
Driver Changes:
- Add support for HDMI and JZ4780 to ingenic.
- Add support for higher DP/eDP bitrates to nouveau.
- Assorted driver fixes to tilcdc, vmwgfx, sn65dsi83, meson, stm, panfrost, v3d, gma500, vc4, virtio, mgag200, ast, radeon, amdgpu, nouveau, various bridge drivers.
- Convert and revert exynos dsi support to bridge driver.
- Add vcc supply regulator support for sn65dsi83.
- More conversion of bridge/chipone-icn6211 to atomic.
- Remove conflicting fb's from stm, and add support for new hw version.
- Add device link in parade-ps8640 to fix suspend/resume.
- Update Boe-tv110c9m init sequence.
- Add wide screen support to AST2600.
- Fix omapdrm implicit dma_buf fencing.
- Add support for multiple overlay planes to vkms.
- Convert bridge/anx7625 to atomic, add HDCP support,
add eld support for audio, and fix HPD.
- Add driver for ChromeOS privacy screen.
- Handover display from firmware to vc4 more gracefully, and support nomodeset.
- Add flexible and ycbcr pixel formats to stm/ltdc.
- Convert exynos mipi dsi to atomic.
- Add initial dual core group GPUs support to panfrost.
- No longer add exclusive fence in amdgpu as shared fence.
- Add CSC and full range supoprt to vc4.
- Shutdown the display on system shutdown and unbind.
- Add Multi-Inno Technology MI0700S4T-6 simple panel.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/456a23c6-7324-7543-0c45-751f30ef83f7@linux.intel.com
Requesting the framebuffer memory in simpledrm marks the memory
range as busy. This used to be done by the firmware sysfb code,
but the driver is the correct place.
v2:
* use I/O memory if request_mem_region() fails (Jocelyn)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220125091222.21457-4-tzimmermann@suse.de
Remove custom cirrus_init() and cirrus_exit() functions and initialize
the module with DRM module helpers.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211222082831.196562-5-javierm@redhat.com
Remove custom bochs_init() and bochs_exit() functions and initialize
the module with DRM module helpers.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211222082831.196562-4-javierm@redhat.com
core:
- add privacy screen support
- move nomodeset option into drm subsystem
- clean up nomodeset handling in drivers
- make drm_irq.c legacy
- fix stack_depot name conflicts
- remove DMA_BUF_SET_NAME ioctl restrictions
- sysfs: send hotplug event
- replace several DRM_* logging macros with drm_*
- move hashtable to legacy code
- add error return from gem_create_object
- cma-helper: improve interfaces, drop CONFIG_DRM_KMS_CMA_HELPER
- kernel.h related include cleanups
- support XRGB2101010 source buffers
ttm:
- don't include drm hashtable
- stop pruning fences after wait
- documentation updates
dma-buf:
- add dma_resv selftest
- add debugfs helpers
- remove dma_resv_get_excl_unlocked
- documentation
- make fences mandatory in dma_resv_add_excl_fence
dp:
- add link training delay helpers
gem:
- link shmem/cma helpers into separate modules
- use dma_resv iteratior
- import dma-buf namespace into gem helper modules
scheduler:
- fence grab fix
- lockdep fixes
bridge:
- switch to managed MIPI DSI helpers
- register and attach during probe fixes
- convert to YAML in several places.
panel:
- add bunch of new panesl
simpledrm:
- support FB_DAMAGE_CLIPS
- support virtual screen sizes
- add Apple M1 support
amdgpu:
- enable seamless boot for DCN 3.01
- runtime PM fixes
- use drm_kms_helper_connector_hotplug_event
- get all fences at once
- use generic drm fb helpers
- PSR/DPCD/LTTPR/DSC/PM/RAS/OLED/SRIOV fixes
- add smart trace buffer (STB) for supported GPUs
- display debugfs entries
- new SMU debug option
- Documentation update
amdkfd:
- IP discovery enumeration refactor
- interface between driver fixes
- SVM fixes
- kfd uapi header to define some sysfs bitfields.
i915:
- support VESA panel backlights
- enable ADL-P by default
- add eDP privacy screen support
- add Raptor Lake S (RPL-S) support
- DG2 page table support
- lots of GuC/HuC fw refactoring
- refactored i915->gt interfaces
- CD clock squashing support
- enable 10-bit gamma support
- update ADL-P DMC fw to v2.14
- enable runtime PM autosuspend by default
- ADL-P DSI support
- per-lane DP drive settings for ICL+
- add support for pipe C/D DMC firmware
- Atomic gamma LUT updates
- remove CCS FB stride restrictions on ADL-P
- VRR platform support for display 11
- add support for display audio codec keepalive
- lots of display refactoring
- fix runtime PM handling during PXP suspend
- improved eviction performance with async TTM moves
- async VMA unbinding improvements
- VMA locking refactoring
- improved error capture robustness
- use per device iommu checks
- drop bits stealing from i915_sw_fence function ptr
- remove dma_resv_prune
- add IC cache invalidation on DG2
nouveau:
- crc fixes
- validate LUTs in atomic check
- set HDMI AVI RGB quant to full
tegra:
- buffer objects reworks for dma-buf compat
- NVDEC driver uAPI support
- power management improvements
etnaviv:
- IOMMU enabled system support
- fix > 4GB command buffer mapping
- close a DoS vector
- fix spurious GPU resets
ast:
- fix i2c initialization
rcar-du:
- DSI output support
exynos:
- replace legacy gpio interface
- implement generic GEM object mmap
msm:
- dpu plane state cleanup in prep for multirect
- dpu debugfs cleanups
- dp support for sc7280
- a506 support
- removal of struct_mutex
- remove old eDP sub-driver
anx7625:
- support MIPI DSI input
- support HDMI audio
- fix reading EDID
lvds:
- fix bridge DT bindings
megachips:
- probe both bridges before registering
dw-hdmi:
- allow interlace on bridge
ps8640:
- enable runtime PM
- support aux-bus
tx358768:
- enable reference clock
- add pulse mode support
ti-sn65dsi86:
- use regmap bulk write
- add PWM support
etnaviv:
- get all fences at once
gma500:
- gem object cleanups
kmb:
- enable fb console
radeon:
- use dma_resv_wait_timeout
rockchip:
- add DSP hold timeout
- suspend/resume fixes
- PLL clock fixes
- implement mmap in GEM object functions
- use generic fbdev emulation
sun4i:
- use CMA helpers without vmap support
vc4:
- fix HDMI-CEC hang with display is off
- power on HDMI controller while disabling
- support 4K@60Hz modes
- support 10-bit YUV 4:2:0 output
vmwgfx:
- fix leak on probe errors
- fail probing on broken hosts
- new placement for MOB page tables
- hide internal BOs from userspace
- implement GEM support
- implement GL 4.3 support
virtio:
- overflow fixes
xen:
- implement mmap as GEM object function
omapdrm:
- fix scatterlist export
- support virtual planes
mediatek:
- MT8192 support
- CMDQ refinement
-----BEGIN PGP SIGNATURE-----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=MByd
-----END PGP SIGNATURE-----
Merge tag 'drm-next-2022-01-07' of git://anongit.freedesktop.org/drm/drm
Pull drm updates from Dave Airlie:
"Highlights are support for privacy screens found in new laptops, a
bunch of nomodeset refactoring, and i915 enables ADL-P systems by
default, while starting to add RPL-S support.
vmwgfx adds GEM and support for OpenGL 4.3 features in userspace.
Lots of internal refactorings around dma reservations, and lots of
driver refactoring as well.
Summary:
core:
- add privacy screen support
- move nomodeset option into drm subsystem
- clean up nomodeset handling in drivers
- make drm_irq.c legacy
- fix stack_depot name conflicts
- remove DMA_BUF_SET_NAME ioctl restrictions
- sysfs: send hotplug event
- replace several DRM_* logging macros with drm_*
- move hashtable to legacy code
- add error return from gem_create_object
- cma-helper: improve interfaces, drop CONFIG_DRM_KMS_CMA_HELPER
- kernel.h related include cleanups
- support XRGB2101010 source buffers
ttm:
- don't include drm hashtable
- stop pruning fences after wait
- documentation updates
dma-buf:
- add dma_resv selftest
- add debugfs helpers
- remove dma_resv_get_excl_unlocked
- documentation
- make fences mandatory in dma_resv_add_excl_fence
dp:
- add link training delay helpers
gem:
- link shmem/cma helpers into separate modules
- use dma_resv iteratior
- import dma-buf namespace into gem helper modules
scheduler:
- fence grab fix
- lockdep fixes
bridge:
- switch to managed MIPI DSI helpers
- register and attach during probe fixes
- convert to YAML in several places.
panel:
- add bunch of new panesl
simpledrm:
- support FB_DAMAGE_CLIPS
- support virtual screen sizes
- add Apple M1 support
amdgpu:
- enable seamless boot for DCN 3.01
- runtime PM fixes
- use drm_kms_helper_connector_hotplug_event
- get all fences at once
- use generic drm fb helpers
- PSR/DPCD/LTTPR/DSC/PM/RAS/OLED/SRIOV fixes
- add smart trace buffer (STB) for supported GPUs
- display debugfs entries
- new SMU debug option
- Documentation update
amdkfd:
- IP discovery enumeration refactor
- interface between driver fixes
- SVM fixes
- kfd uapi header to define some sysfs bitfields.
i915:
- support VESA panel backlights
- enable ADL-P by default
- add eDP privacy screen support
- add Raptor Lake S (RPL-S) support
- DG2 page table support
- lots of GuC/HuC fw refactoring
- refactored i915->gt interfaces
- CD clock squashing support
- enable 10-bit gamma support
- update ADL-P DMC fw to v2.14
- enable runtime PM autosuspend by default
- ADL-P DSI support
- per-lane DP drive settings for ICL+
- add support for pipe C/D DMC firmware
- Atomic gamma LUT updates
- remove CCS FB stride restrictions on ADL-P
- VRR platform support for display 11
- add support for display audio codec keepalive
- lots of display refactoring
- fix runtime PM handling during PXP suspend
- improved eviction performance with async TTM moves
- async VMA unbinding improvements
- VMA locking refactoring
- improved error capture robustness
- use per device iommu checks
- drop bits stealing from i915_sw_fence function ptr
- remove dma_resv_prune
- add IC cache invalidation on DG2
nouveau:
- crc fixes
- validate LUTs in atomic check
- set HDMI AVI RGB quant to full
tegra:
- buffer objects reworks for dma-buf compat
- NVDEC driver uAPI support
- power management improvements
etnaviv:
- IOMMU enabled system support
- fix > 4GB command buffer mapping
- close a DoS vector
- fix spurious GPU resets
ast:
- fix i2c initialization
rcar-du:
- DSI output support
exynos:
- replace legacy gpio interface
- implement generic GEM object mmap
msm:
- dpu plane state cleanup in prep for multirect
- dpu debugfs cleanups
- dp support for sc7280
- a506 support
- removal of struct_mutex
- remove old eDP sub-driver
anx7625:
- support MIPI DSI input
- support HDMI audio
- fix reading EDID
lvds:
- fix bridge DT bindings
megachips:
- probe both bridges before registering
dw-hdmi:
- allow interlace on bridge
ps8640:
- enable runtime PM
- support aux-bus
tx358768:
- enable reference clock
- add pulse mode support
ti-sn65dsi86:
- use regmap bulk write
- add PWM support
etnaviv:
- get all fences at once
gma500:
- gem object cleanups
kmb:
- enable fb console
radeon:
- use dma_resv_wait_timeout
rockchip:
- add DSP hold timeout
- suspend/resume fixes
- PLL clock fixes
- implement mmap in GEM object functions
- use generic fbdev emulation
sun4i:
- use CMA helpers without vmap support
vc4:
- fix HDMI-CEC hang with display is off
- power on HDMI controller while disabling
- support 4K@60Hz modes
- support 10-bit YUV 4:2:0 output
vmwgfx:
- fix leak on probe errors
- fail probing on broken hosts
- new placement for MOB page tables
- hide internal BOs from userspace
- implement GEM support
- implement GL 4.3 support
virtio:
- overflow fixes
xen:
- implement mmap as GEM object function
omapdrm:
- fix scatterlist export
- support virtual planes
mediatek:
- MT8192 support
- CMDQ refinement"
* tag 'drm-next-2022-01-07' of git://anongit.freedesktop.org/drm/drm: (1241 commits)
drm/amdgpu: no DC support for headless chips
drm/amd/display: fix dereference before NULL check
drm/amdgpu: always reset the asic in suspend (v2)
drm/amdgpu: put SMU into proper state on runpm suspending for BOCO capable platform
drm/amd/display: Fix the uninitialized variable in enable_stream_features()
drm/amdgpu: fix runpm documentation
amdgpu/pm: Make sysfs pm attributes as read-only for VFs
drm/amdgpu: save error count in RAS poison handler
drm/amdgpu: drop redundant semicolon
drm/amd/display: get and restore link res map
drm/amd/display: support dynamic HPO DP link encoder allocation
drm/amd/display: access hpo dp link encoder only through link resource
drm/amd/display: populate link res in both detection and validation
drm/amd/display: define link res and make it accessible to all link interfaces
drm/amd/display: 3.2.167
drm/amd/display: [FW Promotion] Release 0.0.98
drm/amd/display: Undo ODM combine
drm/amd/display: Add reg defs for DCN303
drm/amd/display: Changed pipe split policy to allow for multi-display pipe split
drm/amd/display: Set optimize_pwr_state for DCN31
...
Link drm_fb_cma_helper.o into drm_cma_helper.ko if CONFIG_DRM_KMS_HELPER
has been set. Remove CONFIG_DRM_KMS_CMA_HELPER config option. Selecting
KMS helpers and CMA will now automatically enable CMA KMS helpers.
Some drivers' Kconfig files did not correctly select KMS or CMA helpers.
Fix this as part of the change.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20211106193509.17472-3-tzimmermann@suse.de
The "nomodeset" kernel cmdline parameter is handled by the vgacon driver
but the exported vgacon_text_force() symbol is only used by DRM drivers.
It makes much more sense for the parameter logic to be in the subsystem
of the drivers that are making use of it.
Let's move the vgacon_text_force() function and related logic to the DRM
subsystem. While doing that, rename it to drm_firmware_drivers_only() and
make it return true if "nomodeset" was used and false otherwise. This is
a better description of the condition that the drivers are testing for.
Suggested-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20211112133230.1595307-4-javierm@redhat.com
Add constants for the maximum size of the shadow-plane surface
size. Useful for shadow planes with virtual screen sizes. The
current sizes are 4096 scanlines with 4096 pixels each. This
seems reasonable for current hardware, but can be increased as
necessary.
In simpledrm, set the maximum framebuffer size from the constants
for shadow planes. Implements support for virtual screen sizes and
page flipping on the fbdev console.
v3:
* use decimal numbers for shadow-plane constants (Noralf)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Noralf Trønnes <noralf@tronnes.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20211110103702.374-9-tzimmermann@suse.de
Enable the FB_DAMAGE_CLIPS property to reduce display-update
overhead. Also fixes a warning in the kernel log.
simple-framebuffer simple-framebuffer.0: [drm] drm_plane_enable_fb_damage_clips() not called
Fix the computation of the blit rectangle. This wasn't an issue so
far, as simpledrm always blitted the full framebuffer. The code now
supports damage clipping and virtual screen sizes.
v3:
* fix drm_dev_enter() error path (Noralf)
* remove unnecessary clipping from update function (Noralf)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20211110103702.374-8-tzimmermann@suse.de
Move destination-buffer clipping from format-helper blit function into
caller. Rename drm_fb_blit_rect_dstclip() to drm_fb_blit_toio(). Done for
consistency with the rest of the interface. Remove drm_fb_blit_dstclip(),
which isn't required.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20211110103702.374-6-tzimmermann@suse.de
Move destination-buffer clipping from all format-helper conversion
functions into callers. Support destination-buffer pitch. Only
distinguish between system and I/O memory, but use same logic
everywhere.
Simply harmonize the interface and semantics of the existing code.
Not all conversion helpers support all combinations of parameters.
We have to add additional features when we need them.
v2:
* fix default destination pitch in drm_fb_xrgb8888_to_gray8()
(Noralf)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Tested-by: Noralf Trønnes <noralf@tronnes.org>
Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20211110103702.374-5-tzimmermann@suse.de
Move destination-buffer clipping from all format-helper memcpy
function into callers. Support destination-buffer pitch. Only
distinguish between system and I/O memory, but use same logic
everywhere.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Tested-by: Noralf Trønnes <noralf@tronnes.org>
Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20211110103702.374-3-tzimmermann@suse.de
