IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
bdw_rt286_fe_ops is redundant as platform components already limit the
number of channels available for the endpoint.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Reviewed-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Tested-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220620101402.2684366-18-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Drop redundant 'ret' assignemnt, stop ignoring set_jack() return value
and reword local 'component' variable to 'codec' to improve readability.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Reviewed-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Tested-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220620101402.2684366-16-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Declare local 'dev' and make use of it plus dev_get_platdata() to
improve code readability. Relocate few relevant to the function macros
for the exact same read too.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Reviewed-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Tested-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220620101402.2684366-14-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Drop redundant and update valuable comments within the file to increase
readability. This patch also revisits module information and kconfig
help strings.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Reviewed-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Tested-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220620101402.2684366-13-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Make use of 100 character limit and modify indentation so code is easier
to read. While at it, sort includes in alphabetical order.
While at it, rename local variable 'chan' to 'channels' to match
hsw_rt5640 board's equivalent.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Reviewed-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Tested-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220620101402.2684366-12-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Align with other Intel boards naming convention and let the name
explicitly state which components are being connected.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Reviewed-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Tested-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220620101402.2684366-11-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Replace ambiguous 'broadwell_rt286_' prefixes in favour of 'card_',
'link_' and other similar strings to clearly state which object given
member implements behavior for.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Reviewed-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Tested-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220620101402.2684366-10-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Rename source file to drop any ambiguity.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Reviewed-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Tested-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220620101402.2684366-9-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Declare local 'dev' and make use of it plus dev_get_platdata() to
improve code readability.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Reviewed-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Tested-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220620101402.2684366-7-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Drop redundant and update valuable comments within the file to increase
readability. This patch also revisits module information and kconfig
help strings.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Reviewed-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Tested-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220620101402.2684366-6-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Make use of 100 character limit and modify indentation so code is easier
to read. While at it, sort includes in alphabetical order.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Reviewed-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Tested-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220620101402.2684366-5-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Align with other Intel boards naming convention and let the name
explicitly state which components are being connected.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Reviewed-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Tested-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220620101402.2684366-4-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Replace ambiguous 'haswell_rt5640_' prefixes in favour of 'card_',
'link_' and other similar strings to clearly state which object given
member implements behavior for.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Reviewed-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Tested-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220620101402.2684366-3-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Rename source file to drop any ambiguity.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Reviewed-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Tested-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220620101402.2684366-2-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Judy Hsiao <judyhsiao@chromium.org>:
The patches series is to fix the unexpected large DC output
voltage of Max98357a that burns the speakers on the rockchip
platform when BCLK and SD_MODE are ON but LRCLK is OFF.
Commit 44f362c2cc6d ("ASoC: rockchip: i2s: switch BCLK to GPIO") added
pinctrl lookups, but did not skip the lookup if there was no pinctrl
device tied to the I2S controller. As a result, the lookup was done
on an invalid pointer in such cases, causing a kernel panic.
Only do the subsequent pinctrl state lookups and switch if a pinctrl
device was found.
i2s_pinctrl_select_bclk_{on,off} already guard against missing pinctrl
device or pinctrl state, so those two functions aren't touched.
Fixes: 44f362c2cc6d ("ASoC: rockchip: i2s: switch BCLK to GPIO")
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Link: https://lore.kernel.org/r/20220621185747.2782-1-wens@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Even in the presence of problems (here: rn_acp_deinit() might fail), it's
important to unregister all resources acquired during .probe() because
even if .remove() returns an error code, the device is removed.
As .remove() is only called after .probe() returned success, platdata
must be valid, so the first check in .remove() can just be dropped.
This is a preparation for making platform remove callbacks return void.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20220622061739.225966-1-u.kleine-koenig@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
The function snd_soc_unregister_card() returned 0 unconditionally and most
callers don't care to check the return value. Make it return void and
adapt the callers that didn't ignore the return value before.
This is a preparation for making platform remove callbacks return void.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20220621145834.198519-1-u.kleine-koenig@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
We discoverd that the state of BCLK on, LRCLK off and SD_MODE on
may cause the speaker melting issue. Removing LRCLK while BCLK
is present can cause unexpected output behavior including a large
DC output voltage as described in the Max98357a datasheet.
In order to:
1. prevent BCLK from turning on by other component.
2. keep BCLK and LRCLK being present at the same time
This patch switches BCLK to GPIO func before LRCLK output, and
configures BCLK func back during LRCLK is output.
Without this fix, BCLK is turned on 11 ms earlier than LRCK by the
da7219.
With this fix, BCLK is turned on only 0.4 ms earlier than LRCK by
the rockchip codec.
Signed-off-by: Judy Hsiao <judyhsiao@chromium.org>
Reviewed-by: Brian Norris <briannorris@chromium.org>
Link: https://lore.kernel.org/r/20220619095324.492678-2-judyhsiao@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The initial settings will be written before the codec probe function.
But, the rt711->component doesn't be assigned yet.
If IO error happened during initial settings operations, it will cause the kernel panic.
This patch changed component->dev to slave->dev to fix this issue.
Signed-off-by: Shuming Fan <shumingf@realtek.com>
Link: https://lore.kernel.org/r/20220621090719.30558-1-shumingf@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
dmaengine_terminate_all() is deprecated and should no longer be used.
Use dmaengine_terminate_async() instead. This involves no functional change
since both functions do the same.
After dmaengine_terminate_async() dmaengine_synchronize() must be called
to make sure the channel has really stopped before the underlying memory
is freed. This is done implicitly by dma_release_channel() called from
the .hw_free hook.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Link: https://lore.kernel.org/r/20220617120133.4011846-1-s.hauer@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
We discoverd that the state of BCLK on, LRCLK off and SD_MODE on
may cause the speaker melting issue. Removing LRCLK while BCLK
is present can cause unexpected output behavior including a large
DC output voltage as described in the Max98357a datasheet.
In order to:
1. prevent BCLK from turning on by other component.
2. keep BCLK and LRCLK being present at the same time
This patch switches BCLK to GPIO func before LRCLK output, and
configures BCLK func back during LRCLK is output.
Without this fix, BCLK is turned on 11 ms earlier than LRCK by the
da7219.
With this fix, BCLK is turned on only 0.4 ms earlier than LRCK by
the rockchip codec.
Signed-off-by: Judy Hsiao <judyhsiao@chromium.org>
Link: https://lore.kernel.org/r/20220615045643.3137287-1-judyhsiao@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>:
While testing driver bind/unbind sequences, I stumbled on a corner
case where the SoundWire bus can be suspended before the ASoC card
registration happens. During the registration, register accesses would
then lead to timeouts. This does not happen in regular usages where
the card registration happens within the 3-second time window before
suspend.
Adding a simple pm_runtime_resume_and_get() on component probe solves
the issue, but experiments showed it was too invasive to add at the
ASoC core level, with multiple regressions reported by our CI.
This patchset limits the additional resume to the SOF and SoundWire
codec drivers. An additional patch for the soundwire/intel component
will be sent separately.
Merge series from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>:
The enablement of IMR-based DSP boot helped reduce resume latency, but
unfortunately the context is not saved in S4 and S5 which leads to
multiple reports of boot failures.
This patchset forces a full firmware reload/reboot when resuming from
S4/S5 and restores functionality.
Before initiating IPC and/or bus transactions when loading the
topology during a component probe, which happens on card
registration/creation, make sure the device for the SOF driver is
pm_runtime active.
The SOF probe is not necessarily followed by the component probe, such
a timing assumption can be broken in driver bind/unbind tests. This
can be artifially shown if the module for the machine driver is
'blacklisted' and the SOF device becomes pm_runtime_suspended before
manually calling modprobe to register the card.
In an initial experiment, pm_resume_and_get() was called from
soc-component.c, since the current ASoC component model is arguably
missing dependencies between component status and device
status. However this approach proved too invasive and breaks all
existing HDMI playback solutions on Intel platforms.
While this will result in duplication of code, generating pm_runtime
transitions only if strictly required for a given component makes more
sense overall. This patch adds the pm_runtime resume transition for
SOF only.
BugLink: https://github.com/thesofproject/linux/issues/3651
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20220616210825.132093-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The lockdep mechanism revealed an unbalanced unlocking on MT8186:
[ 2.993966] WARNING: bad unlock balance detected!
[ 2.993978] -------------------------------------
[ 2.993983] kworker/u16:1/10 is trying to release lock (gpio_request_mutex) at:
[ 2.993994] [<ffffffdcd9adebf8>] mt8186_afe_gpio_request+0xf8/0x210
[ 2.994012] but there are no more locks to release!
The cause is that the mutex will be double unlocked if dai is unknown
during GPIO selection, and this patch fixes it.
Fixes: cfa9a966f12a ("ASoC: mediatek: mt8186: support gpio control in platform driver")
Signed-off-by: Fei Shao <fshao@chromium.org>
Link: https://lore.kernel.org/r/20220617111003.2014395-1-fshao@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The standard snd_soc_info_volsw() allows a two value control to be
defined as an integer control only if the control name ends in
"Volume". It achieves this by creating a substring if it contains
" Volume", and ensuring this exists at the end of the name. The
volume substring is then used to decide whether the type is a
SNDRV_CTL_ELEM_TYPE_INTEGER or SNDRV_CTL_ELEM_TYPE_BOOLEAN.
However this volume substring is only computed for a two value
control.
This means for controls where there are more than two possible
values, the substring is never created, so in this case the
substring remains NULL, and the condition yields
SNDRV_CTL_ELEM_TYPE_BOOLEAN, even though there are more than 2
possible values.
If there are more than 2 possible values for the control,
then it should always be an integer control.
Fixes: aa2a4b897132 ("ASoC: ops: Fix boolean/integer detection for simple controls")
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220617153606.2619457-1-sbinding@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>:
This patchset adds the missing jack pin remapping needed by upstream
UCM on Chromebooks, suggested by Jaroslav Kysela [1].
These patches were succesfully tested on GeminiLake and JasperLake
platforms, and generalized to other Chromebooks.
[1] https://mailman.alsa-project.org/pipermail/sound-open-firmware/2022-June/004468.html
Merge series from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>:
Cleanups suggested by Greg KH during SoundWire reviews, since the
__func__ information can be added with the dyndbg kernel parameter
[1].
The first two patches change the error level in cases where the use of
dev_dbg() was inconsistent with an aborted programming sequence.
[1] https://lore.kernel.org/alsa-devel/20220610023537.27223-2-yung-chuan.liao@linux.intel.com/
Legacy or non DT boot is no longer possible on systems where the
tw4030/5030 is used.
Drop the support for handling legacy pdata and replace it with a local
board_params struct to allow further cleanups on the mfd side.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@gmail.com>
Link: https://lore.kernel.org/r/20220616153521.29701-1-peter.ujfalusi@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The module and function information can be added with
'modprobe foo dyndbg=+pmf'
Suggested-by: Greg KH <gregkh@linuxfoundation.org>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20220616215351.135643-14-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The module and function information can be added with
'modprobe foo dyndbg=+pmf'
Suggested-by: Greg KH <gregkh@linuxfoundation.org>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20220616215351.135643-13-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The module and function information can be added with
'modprobe foo dyndbg=+pmf'
Suggested-by: Greg KH <gregkh@linuxfoundation.org>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20220616215351.135643-12-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The module and function information can be added with
'modprobe foo dyndbg=+pmf'
Suggested-by: Greg KH <gregkh@linuxfoundation.org>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20220616215351.135643-11-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The module and function information can be added with
'modprobe foo dyndbg=+pmf'
Suggested-by: Greg KH <gregkh@linuxfoundation.org>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20220616215351.135643-10-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The module and function information can be added with
'modprobe foo dyndbg=+pmf'
Suggested-by: Greg KH <gregkh@linuxfoundation.org>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20220616215351.135643-9-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The module and function information can be added with
'modprobe foo dyndbg=+pmf'
Suggested-by: Greg KH <gregkh@linuxfoundation.org>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20220616215351.135643-8-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The module and function information can be added with
'modprobe foo dyndbg=+pmf'
Suggested-by: Greg KH <gregkh@linuxfoundation.org>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20220616215351.135643-7-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The module and function information can be added with
'modprobe foo dyndbg=+pmf'
Suggested-by: Greg KH <gregkh@linuxfoundation.org>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20220616215351.135643-6-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The module and function information can be added with
'modprobe foo dyndbg=+pmf'
Suggested-by: Greg KH <gregkh@linuxfoundation.org>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20220616215351.135643-5-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
