Commit Graph

85 Commits

Author SHA1 Message Date
Stephen Hemminger
22dd5b0cba get_maintainer: fix perlcritic warnings
perlcritic is a standard checker for Perl Best Practices.  This patch
fixes most of the warnings in the get_maintainer script.  If kernel
programmers are going to have checkpatch they should write clean scripts
as well...

Bareword file handle opened at line 176, column 1.  See pages 202,204 of PBP.  (Severity: 5)
Two-argument "open" used at line 176, column 1.  See page 207 of PBP.  (Severity: 5)
Bareword file handle opened at line 207, column 5.  See pages 202,204 of PBP.  (Severity: 5)
Two-argument "open" used at line 207, column 5.  See page 207 of PBP.  (Severity: 5)
Bareword file handle opened at line 246, column 6.  See pages 202,204 of PBP.  (Severity: 5)
Two-argument "open" used at line 246, column 6.  See page 207 of PBP.  (Severity: 5)
Bareword file handle opened at line 258, column 2.  See pages 202,204 of PBP.  (Severity: 5)
Two-argument "open" used at line 258, column 2.  See page 207 of PBP.  (Severity: 5)
Expression form of "eval" at line 983, column 17.  See page 161 of PBP.  (Severity: 5)
Expression form of "eval" at line 985, column 17.  See page 161 of PBP.  (Severity: 5)
Subroutine prototypes used at line 1186, column 1.  See page 194 of PBP.  (Severity: 5)
Subroutine prototypes used at line 1206, column 1.  See page 194 of PBP.  (Severity: 5)

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Acked-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-06 11:26:34 -08:00
Joe Perches
64f77f312b scripts/get_maintainer.pl: add ability to read from STDIN
Doesn't need or accept '-' as a trailing option to read stdin.  Doesn't
print usage() after bad options.  Adds --usage as command line equivalent
of --help

Suggested-by: Borislav Petkov <petkovbb@googlemail.com>
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-06 11:26:34 -08:00
Joe Perches
f11e9a1534 scripts/get_maintainer.pl: change --sections to print in the same style as MAINTAINERS
Signed-off-by: Joe Perches <joe@perches.com>
Cc: Stefan Richter <stefanr@s5r6.in-berlin.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-06 11:26:34 -08:00
Joe Perches
4b76c9da61 scripts/get_maintainer.pl: add --sections, print entire matched subsystem
Print the complete contents of the matched subsystems
in pattern match depth order.

Sample output:

$ ./scripts/get_maintainer.pl --sections -f drivers/net/usb/smsc95xx.c
USB SMSC95XX ETHERNET DRIVER
M:Steve Glendinning <steve.glendinning@smsc.com>
L:netdev@vger.kernel.org
S:Supported
F:drivers/net/usb/smsc95xx.*
USB SUBSYSTEM
M:Greg Kroah-Hartman <gregkh@suse.de>
L:linux-usb@vger.kernel.org
W:http://www.linux-usb.org
T:quilt kernel.org/pub/linux/kernel/people/gregkh/gregkh-2.6/
S:Supported
F:Documentation/usb/
F:drivers/net/usb/
F:drivers/usb/
F:include/linux/usb.h
F:include/linux/usb/
NETWORKING DRIVERS
L:netdev@vger.kernel.org
W:http://www.linuxfoundation.org/en/Net
T:git git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6.git
S:Odd Fixes
F:drivers/net/
F:include/linux/if_*
F:include/linux/*device.h
THE REST
M:Linus Torvalds <torvalds@linux-foundation.org>
L:linux-kernel@vger.kernel.org
Q:http://patchwork.kernel.org/project/LKML/list/
T:git git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6.git
S:Buried alive in reporters
F:*
F:*/

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-06 11:26:33 -08:00
Joe Perches
03372dbbe6 scripts/get_maintainer.pl: add --file-emails, find embedded email addresses
Add an imperfect option to search a source file for email addresses.

New option:  --file-emails or --fe

email addresses in files are freeform text and are nearly impossible to
parse.  Still, might as well try to do a somewhat acceptable job of
finding them.  This code should find all addresses that are in the form
addr@domain.tld

The code assumes that up to 3 alphabetic words along with dashes, commas,
and periods that preceed the email address are a name.

If 3 words are found for the name, and one of the first two words are a
single letter and period, or just a single letter then the 3 words are use
as name otherwise the last 2 words are used.

Some variants that are shown correctly:
    John Smith <jksmith@domain.org>
    Random J. Developer <rjd@tld.com>
    Random J. Developer (rjd@tld.com)
    J. Random Developer rjd@tld.com

Variants that are shown nominally correctly:
    Written by First Last (funny-addr@somecompany.com)
is shown as:
    First Last <funny-addr@somecompany.com>

Variants that are shown incorrectly:
    Some Really Long Name <srln@foo.bar>
    MontaVista Software, Inc. <source@mvista.com>
are returned as:
    Long Name <srln@foo.bar>
    "Software, Inc" <source@mvista.com>

--roles and --rolestats show "(in file)" for matches.

For instance:

Without -file-emails:

$ ./scripts/get_maintainer.pl -f -nogit -roles net/core/netpoll.c
David S. Miller <davem@davemloft.net> (maintainer:NETWORKING [GENERAL])
linux-kernel@vger.kernel.org (open list)

With -fe:

$ ./scripts/get_maintainer.pl -f -fe -nogit -roles net/core/netpoll.c
David S. Miller <davem@davemloft.net> (maintainer:NETWORKING [GENERAL])
Matt Mackall <mpm@selenic.com> (in file)
Ingo Molnar <mingo@redhat.com> (in file)
linux-kernel@vger.kernel.org (open list)
netdev@vger.kernel.org (open list:NETWORKING [GENERAL])

The number of email addresses in the file in not limited.  Neither is the
number of returned email addresses.

Signed-off-by: Joe Perches <joe@perches.com>
Cc: Matt Mackall <mpm@selenic.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-06 11:26:33 -08:00
Richard Kennedy
99cf611613 get_maintainer.pl: teach git log to use --no-color
When git has been set to always use color in .gitconfig then I get the
warning message

        Bad divisor in main::vcs_assign: 0

This is caused by vcs_file_signoffs not matching any commits due to the
pattern not understand the colour codes.  Fix this by telling git log to
never use colour.

Signed-off-by: Richard Kennedy <richard@rsk.demon.co.uk>
Acked-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-02-02 18:11:22 -08:00
Joe Perches
272a897904 scripts/get_maintainer.pl: fix file exclusion X: logic
The following command doesn't generate any output.
`./scripts/get_maintainer.pl --no-git -f drivers/net/wireless/wl12xx/wl1271_acx.c`

An excluded "X:" pattern match in any section would cause a file not to
match any other section.

Signed-off-by: Joe Perches <joe@perches.com>
Reported-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-01-11 09:34:05 -08:00
Joe Perches
60db31ac11 scripts/get_maintainer.pl: support multiple VCSs - add mercurial
Restructure a bit for multiple version control systems support.

Use a hash for each supported VCS that contains the commands
and patterns used to find commits, logs, and signers.

--git command line options are still used for hg except for
--git-since.  Use --hg-since instead.

The number of commits can differ for git and hg, so --rolestats
might be different.

Style changes: Use common push style push(@foo...), simplify a return

Bumped version to 0.23.

Signed-off-by: Joe Perches <joe@perches.com>
Cc: Marti Raudsepp <marti@juffo.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-15 08:53:29 -08:00
Joe Perches
a8af2430f3 scripts/get_maintainer.pl: fix --non with --git-blame and cleanups
Fix email matching without name --n and --git-blame
   Using --non and --git-blame caused maintainer signature
   matching to fail.  Fixed that by adding 3rd argument to
   sub format_email to control show/hide name portion of address
Slurp -f file instead of reading line-by-line for K: pattern matching.
   Suggested by Wolfram Sang as more efficient
Refactor git command execution
   Break into 2 functions, execute/analyze
   Share code between --git and --git-blame
   Don't warn multiple times when git isn't installed
Improve stats reporting
   --git-min-percent and -- rolestats now count the total number of commits
   for either the period of --git-since or if using --git-blame the commits
   used by the current file and calculate commit % as
      # of commits signed / total commits * 100
Code style cleaning
   Use consistent sub foo { my (args...) = @_;

Signed-off-by: Joe Perches <joe@perches.com>
Cc: Ben Hutchings <ben@decadent.org.uk>
Cc: Greg KH <greg@kroah.com>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-15 08:53:28 -08:00
Joe Perches
3c7385b81f scripts/get_maintainer.pl: add --roles and --rolestats
--roles shows the role of each email address, i.e. why it was selected.
--rolestats selects --roles and adds git log/blame signers #'s and %

Multiple roles are possible (supporter, maintainer, git-signer...)

--roles or --rolestats is meant to help identify appropriate maintainers
to notify and should not be used with "git send-email --cc-cmd"

Example output:

Existing:

$ ./scripts/get_maintainer.pl -f arch/x86/kernel/acpi/boot.c
Corentin Chary <corentincj@iksaif.net>
Karol Kozimor <sziwan@users.sourceforge.net>
Len Brown <len.brown@intel.com>
Pavel Machek <pavel@ucw.cz>
Rafael J. Wysocki <rjw@sisk.pl>
Thomas Gleixner <tglx@linutronix.de>
Ingo Molnar <mingo@redhat.com>
H. Peter Anvin <hpa@zytor.com>
x86@kernel.org
Yinghai Lu <yhlu.kernel@gmail.com>
Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
acpi4asus-user@lists.sourceforge.net
linux-pm@lists.linux-foundation.org
linux-kernel@vger.kernel.org

With --roles

$ ./scripts/get_maintainer.pl --roles -f arch/x86/kernel/acpi/boot.c
Corentin Chary <corentincj@iksaif.net> (maintainer:ASUS ACPI EXTRAS...)
Karol Kozimor <sziwan@users.sourceforge.net> (maintainer:ASUS ACPI EXTRAS...)
Len Brown <len.brown@intel.com> (supporter:SUSPEND TO RAM,git-signer)
Pavel Machek <pavel@ucw.cz> (supporter:SUSPEND TO RAM)
Rafael J. Wysocki <rjw@sisk.pl> (supporter:SUSPEND TO RAM)
Thomas Gleixner <tglx@linutronix.de> (maintainer:X86 ARCHITECTURE...)
Ingo Molnar <mingo@redhat.com> (maintainer:X86 ARCHITECTURE...,git-signer)
H. Peter Anvin <hpa@zytor.com> (maintainer:X86 ARCHITECTURE...)
x86@kernel.org (maintainer:X86 ARCHITECTURE...)
Yinghai Lu <yhlu.kernel@gmail.com> (git-signer)
Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> (git-signer)
acpi4asus-user@lists.sourceforge.net (open list:ASUS ACPI EXTRAS...)
linux-pm@lists.linux-foundation.org (open list:SUSPEND TO RAM)
linux-kernel@vger.kernel.org (open list)

With --rolestats

$ ./scripts/get_maintainer.pl --rolestats -f arch/x86/kernel/acpi/boot.c
Corentin Chary <corentincj@iksaif.net> (maintainer:ASUS ACPI EXTRAS...)
Karol Kozimor <sziwan@users.sourceforge.net> (maintainer:ASUS ACPI EXTRAS...)
Len Brown <len.brown@intel.com> (supporter:SUSPEND TO RAM,git-signer:16/79=20%)
Pavel Machek <pavel@ucw.cz> (supporter:SUSPEND TO RAM)
Rafael J. Wysocki <rjw@sisk.pl> (supporter:SUSPEND TO RAM)
Thomas Gleixner <tglx@linutronix.de> (maintainer:X86 ARCHITECTURE...)
Ingo Molnar <mingo@redhat.com> (maintainer:X86 ARCHITECTURE...,git-signer:29/79=37%)
H. Peter Anvin <hpa@zytor.com> (maintainer:X86 ARCHITECTURE...)
x86@kernel.org (maintainer:X86 ARCHITECTURE...)
Yinghai Lu <yhlu.kernel@gmail.com> (git-signer:12/79=15%)
Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> (git-signer:6/79=8%)
acpi4asus-user@lists.sourceforge.net (open list:ASUS ACPI EXTRAS...)
linux-pm@lists.linux-foundation.org (open list:SUSPEND TO RAM)
linux-kernel@vger.kernel.org (open list)

With --rolestats and --git-blame

$ ./scripts/get_maintainer.pl --rolestats --git-blame -f arch/x86/kernel/acpi/boot.c
Corentin Chary <corentincj@iksaif.net> (maintainer:ASUS ACPI EXTRAS...)
Karol Kozimor <sziwan@users.sourceforge.net> (maintainer:ASUS ACPI EXTRAS...)
Len Brown <len.brown@intel.com> (supporter:SUSPEND TO RAM,git-signer:16/79=20%,commits:22/154=14%)
Pavel Machek <pavel@ucw.cz> (supporter:SUSPEND TO RAM)
Rafael J. Wysocki <rjw@sisk.pl> (supporter:SUSPEND TO RAM)
Thomas Gleixner <tglx@linutronix.de> (maintainer:X86 ARCHITECTURE...)
Ingo Molnar <mingo@redhat.com> (maintainer:X86 ARCHITECTURE...,git-signer:29/79=37%,commits:36/154=23%)
H. Peter Anvin <hpa@zytor.com> (maintainer:X86 ARCHITECTURE...)
x86@kernel.org (maintainer:X86 ARCHITECTURE...)
Yinghai Lu <yhlu.kernel@gmail.com> (git-signer:12/79=15%,commits:9/154=6%)
Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> (git-signer:6/79=8%)
Andi Kleen <ak@suse.de> (commits:11/154=7%)
Andrew Morton <akpm@osdl.org> (commits:10/154=6%)
acpi4asus-user@lists.sourceforge.net (open list:ASUS ACPI EXTRAS...)
linux-pm@lists.linux-foundation.org (open list:SUSPEND TO RAM)
linux-kernel@vger.kernel.org (open list)

Other changes:

Format git-signers email addresses a bit to reduce bad signatures
Command line bad arguments emitted a verbose usage(), just show --help
Version number bumped to .22

Ben Hutchings had the idea and created a good deal of this implementation.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-15 08:53:28 -08:00
Roel Kluin
3bd7bf5f1a get_maintainer: fix usage comment
With the `s' it just won't work.

Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Acked-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-11-12 07:25:56 -08:00
Joe Perches
dcf36a92f5 scripts/get_maintainer.pl: add patch/file search for keywords
Based on an idea from Wolfram Sang.

Add search for MAINTAINERS line "K:" regex pattern match in a patch or file
Matches are added after file pattern matches
Add --keywords command line switch (default 1, on)
Change version to 0.21

Signed-off-by: Joe Perches <joe@perches.com>
Cc: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-10-29 07:39:26 -07:00
Joe Perches
b781655a6f scripts/get_maintainer.pl: add maintainers in order listed in matched section
Previous behavior was "bottom-up" in each section from the pattern "F:"
entry that matched.  Now information is entered into the various lists in
the "as entered" order for each matched section.

This also allows the F: entry to be put anywhere in a section, not just as
the last entries in the section.

And a couple of improvements:

Don't alphabetically sort before outputting the matched scm, status,
subsystem and web sections.

Ignore content after a single email address so these entries are acceptable
M:	name <address> whatever other comment

And a fix:

Make an M: entry without a name again use the name from an immediately
preceding P: line if it exists.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-22 07:17:46 -07:00
Joe Perches
11ecf53c97 scripts/get_maintainer.pl: add --remove-duplicates
Allow control over the elimination of duplicate email names and addresses

--remove-duplicates will use the first email name or address presented
--noremove-duplicates will emit all names and addresses

--remove-duplicates is enabled by default

For instance:

$ ./scripts/get_maintainer.pl -f drivers/char/tty_ioctl.c
Greg Kroah-Hartman <gregkh@suse.de>
Alan Cox <alan@linux.intel.com>
Mike Frysinger <vapier@gentoo.org>
Alexey Dobriyan <adobriyan@gmail.com>
linux-kernel@vger.kernel.org

$ ./scripts/get_maintainer.pl -f --noremove-duplicates drivers/char/tty_ioctl.c
Greg Kroah-Hartman <gregkh@suse.de>
Alan Cox <alan@redhat.com>
Alan Cox <alan@linux.intel.com>
Alan Cox <alan@lxorguk.ukuu.org.uk>
Mike Frysinger <vapier@gentoo.org>
Alexey Dobriyan <adobriyan@gmail.com>
linux-kernel@vger.kernel.org

Using --remove-duplicates could eliminate multiple maintainers that
share the same name but not the same email address.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-22 07:17:46 -07:00
Joe Perches
4249831613 scripts/get_maintainer.pl: using --separator implies --nomultiline
If a person sets a separator, it's only used if --nomultiline is set.
Don't make the command line also include --nomultiline in that case.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-22 07:17:46 -07:00
Joe Perches
8cbb3a77e1 scripts/get_maintainer.pl: add .mailmap use, shell and email cleanups
Add reading and using .mailmap file if it exists
Convert address entries in .mailmap to first encountered address
Don't terminate shell commands with \n
Strip characters found after sign-offs by: name <address> [stripped]

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-22 07:17:46 -07:00
Joe Perches
0e70e83dfd scripts/get_maintainer.pl: better email routines, use perl not shell where possible
Added format_email and parse_email routines to reduce inline use.

Added email_address_inuse to eliminate multiple maintainer entries
for the same email address, the first name encountered is used.

Used internal perl equivalents of shell cmd use of grep|cut|sort|uniq

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-22 07:17:46 -07:00
Joe Perches
3fb55652b9 scripts/get_maintainer.pl: add --pattern-depth
--pattern-depth is used to control how many levels of directory traversal
should be performed to find maintainers.  default is 0 (all directory levels).

For instance:

MAINTAINERS currently has multiple M: and F: entries that match
net/netfilter/ipvs/ip_vs_app.c

IPVS
M:	Wensong Zhang <wensong@linux-vs.org>
M:	Simon Horman <horms@verge.net.au>
M:	Julian Anastasov <ja@ssi.bg>
[...]
F:	net/netfilter/ipvs/

NETFILTER/IPTABLES/IPCHAINS
[...]
M:	Patrick McHardy <kaber@trash.net>
[...]
F:	net/netfilter/

NETWORKING [GENERAL]
M:	"David S. Miller" <davem@davemloft.net>
[...]
F:	net/

THE REST
M:	Linus Torvalds <torvalds@linux-foundation.org>
[...]
F:	*/

Using this command will return all of those maintainers:
(except Linus unless --git-chief-maintainers is specified)

$ ./scripts/get_maintainer.pl --nogit -nol \
	-f net/netfilter/ipvs/ip_vs_app.c
Julian Anastasov <ja@ssi.bg>
Simon Horman <horms@verge.net.au>
Wensong Zhang <wensong@linux-vs.org>
Patrick McHardy <kaber@trash.net>
David S. Miller <davem@davemloft.net>

Adding --pattern-depth=1 will match at the deepest level
$ ./scripts/get_maintainer.pl --nogit -nol --pattern-depth=1 \
	-f net/netfilter/ipvs/ip_vs_app.c
Julian Anastasov <ja@ssi.bg>
Simon Horman <horms@verge.net.au>
Wensong Zhang <wensong@linux-vs.org>

Adding --pattern-depth=2 will match at the deepest level and 1 higher
$ ./scripts/get_maintainer.pl --nogit -nol --pattern-depth=2 \
	-f net/netfilter/ipvs/ip_vs_app.c
Julian Anastasov <ja@ssi.bg>
Simon Horman <horms@verge.net.au>
Wensong Zhang <wensong@linux-vs.org>
Patrick McHardy <kaber@trash.net>

and so on.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-22 07:17:46 -07:00
Joe Perches
1d606b4e0b scripts/get_maintainer.pl: add sections in pattern match depth order
Before this change, matched sections were added in the order
of appearance in the normally alphabetic section order of
the MAINTAINERS file.

For instance, finding the maintainer for drivers/scsi/wd7000.c
would first find "SCSI SUBSYSTEM", then "WD7000 SCSI SUBSYSTEM",
then "THE REST".

before patch:

$ ./scripts/get_maintainer.pl --nogit -f drivers/scsi/wd7000.c
James E.J. Bottomley <James.Bottomley@HansenPartnership.com>
Miroslav Zagorac <zaga@fly.cc.fer.hr>
linux-scsi@vger.kernel.org
linux-kernel@vger.kernel.org

get_maintainer.pl now selects matched sections by longest pattern match.
Longest is the number of "/"s and any specific file pattern.

This changes the example output order of MAINTAINERS to whatever is
selected in "WD7000 SUBSYSTEM", then "SCSI SYSTEM", then "THE REST".

after patch:

$ ./scripts/get_maintainer.pl --nogit -f drivers/scsi/wd7000.c
Miroslav Zagorac <zaga@fly.cc.fer.hr>
James E.J. Bottomley <James.Bottomley@HansenPartnership.com>
linux-scsi@vger.kernel.org
linux-kernel@vger.kernel.org

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-22 07:17:46 -07:00
Joe Perches
f5492666a3 scripts/get_maintainer.pl: add --git-blame
Julia Lawall suggested that get_maintainers.pl should have the
ability to include signatories of commits that are modified by
a particular patch.

Vegard Nossum did something similar once.
http://lkml.org/lkml/2008/5/29/449

The modified script looks the commits for all lines in the
patch, and includes the "-by:" signatories for those commits.
It uses the same git-min-percent, git-max-maintainers, and
git-min-signatures options.  git-since is ignored.

It can be used independently from the --git default, so
        ./scripts/get_maintainers.pl --nogit --git-blame <patch>
or
        ./scripts/get_maintainers.pl --nogit --git-blame -f <file>
is acceptable.

If used with -f <file>, all lines/commits for the file are
checked.

--git-blame can be slow if used with -f <file>
--git-blame does not work with -f <directory>

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-22 07:17:46 -07:00
Joe Perches
3d202aeb7b get_maintainerpl-add-git-min-percent-option-fix
Allow an option to control the minimum percentage of sign-offs required
before being considered a maintainer.

git-min-percent has a default value of 5

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-07-29 19:10:41 -07:00
Joe Perches
afa81ee130 get_maintainer.pl: Add git-min-percent option
Allow an option to control the minimum percentage of sign-offs required
before being considered a maintainer.

git-min-percent has a default value of 5

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-07-29 19:10:41 -07:00
Joe Perches
870020f93a scripts/get_maintainer.pl: Add -f directory use
Don't require a specific file in a directory to be tested.

Also Arnd Bergmann pointed out that the MAINTAINERS pattern requirement
that directory patterns have a trailing slash was unnecessary and was
likely to be error prone.  Removed that requirement.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-07-29 19:10:40 -07:00
Joe Perches
7f29fd2748 scripts/get_maintainer.pl: change "die" to "warn" when command line file is not a patch
fixes git send-email with a cover letter

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-16 19:47:54 -07:00
Joe Perches
df4cc03682 scripts/get_maintainer.pl: allow 8 bit characters in email addresses
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-16 19:47:54 -07:00
Joe Perches
0a79c492bc scripts/get_maintainer.pl: don't print maintainers when not requested
Fixed bug introduced after using rfc822 address checking.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-16 19:47:54 -07:00
Joe Perches
5f2441e976 scripts/get_maintainer.pl: support both "P:/M:" and integrated "M:" lines
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-16 19:47:54 -07:00
Joe Perches
d789504ab0 scripts/get_maintainer.pl: better email name quoting
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-16 19:47:54 -07:00
Joe Perches
1b5e1cf64a scripts/get_maintainer.pl: support M: lines with names and multiple entries per M: line
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-16 19:47:53 -07:00
Joe Perches
de2fc4922b scripts/get_maintainer.pl: warn on missing git or git repository
support older versions of grep (use -E not -P)
no need to return data in routine recent_git_signoffs

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-16 19:47:53 -07:00
Joe Perches
f5f5078db2 scripts/get_maintainer.pl: improve --git-chief-penquins (Linus Torvalds) filtering
Moved linux-kernel@vger.kernel.org to MAINTAINERS
lkml will be added to all CC lists via F: pattern match

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-16 19:47:53 -07:00
Joe Perches
bdf7c685aa scripts/get_maintainer.pl: better fix for subscriber-only mailing lists
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-16 19:47:53 -07:00
Joe Perches
290603c120 scripts/get_maintainer.pl: output first field only in mailing lists and after maintainers.
Fix mailing lists that are described, but not "(subscriber-only)"

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-16 19:47:53 -07:00
Joe Perches
4a7fdb5f51 scripts/get_maintainer.pl - Allow multiple files on command line
Improve handling of "by:" signoffs
Sorting and frequency checks are done by name/email, not
by "by:" tag.

Signed-off-by: Joe Perches <joe@perches.com>
2009-04-10 13:10:54 -07:00
Joe Perches
cb7301c7a3 Add scripts/get_maintainer.pl
A script to parse file pattern information in MAINTAINERS
and return selected information about a file or patch

usage: scripts/get_maintainer.pl [options] patchfile
       scripts/get_maintainer.pl [options] -f file
version: 0.14

MAINTAINERS field selection options:
  --email => print email address(es) if any
    --git => include git "*-by:" signers in commit count order
    --git-chief-penguins => include (Linus Torvalds)
    --git-min-signatures => number of signatures required (default: 1)
    --git-max-maintainers => maximum maintainers to add (default: 5)
    --git-since => git history to use (default: 1-year-ago)
    --m => include maintainer(s) if any
    --n => include name 'Full Name <addr@domain.tld>'
    --l => include list(s) if any
    --s => include subscriber only list(s) if any
  --scm => print SCM tree(s) if any
  --status => print status if any
  --subsystem => print subsystem name if any
  --web => print website(s) if any

Output type options:
  --separator [, ] => separator for multiple entries on 1 line
  --multiline => print 1 entry per line

Default options:
  [--email --git --m --n --l --multiline]

Other options:
  --version => show version
  --help => show this help information

Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: Pavel Machek <pavel@ucw.cz>
2009-04-10 13:10:40 -07:00