IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
The HP Pavilion Aero Laptop 13-be2xxx(8BD6) requires a quirk entry for its internal microphone to function.
Signed-off-by: Al Raj Hassain <alrajhassain@gmail.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://msgid.link/r/20240304103924.13673-1-alrajhassain@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Timing select registers for SRC and CMD are by default
referring to the corresponding SSI word select.
The calculation rule from HW spec skips SSI8, which has
no clock connection.
>From section 43.2.18 CMD Output Timing Select Register (CMDOUT_TIMSEL),
of R-Car Series, 3rd Generation Hardware User’s Manual Rev.2.20:
CMD0_OUT_DIVCLK_ Output Timing
SEL [4:0] Signal Select
B'0 0110: ssi_ws0
B'0 0111: ssi_ws1
B'0 1000: ssi_ws2
B'0 1001: ssi_ws3
B'0 1010: ssi_ws4
B'0 1011: ssi_ws5
B'0 1100: ssi_ws6
B'0 1101: ssi_ws7
<GAP>
B'0 1110: ssi_ws9
B'0 1111: Setting prohibited
Fix the erroneous prohibited setting of timsel value 1111 (0xf) for SSI9
by using timsel value 1110 (0xe) instead. This is possible because SSI8
is not connected as shown by <GAP> in the table above.
[21.695055] rcar_sound ec500000.sound: b adg[0]-CMDOUT_TIMSEL (32):00000f00/00000f1f
Correct the timsel assignment.
Fixes: 629509c5bc478c ("ASoC: rsnd: add Gen2 SRC and DMAEngine support")
Suggested-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Andreas Pape <Andreas.Pape4@bosch.com>
Signed-off-by: Yeswanth Rayapati <yeswanth.rayapati@in.bosch.com>
Tested-by: Yeswanth Rayapati <yeswanth.rayapati@in.bosch.com>
[erosca: massage commit description]
Signed-off-by: Eugeniu Rosca <eugeniu.rosca@bosch.com>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://msgid.link/r/20240301085003.3057-1-erosca@de.adit-jv.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The current measured frame rate is 59.95Hz, which does not meet the
requirements of touch-stylus and stylus cannot work normally. After
adjustment, the actual measurement is 60.001Hz. Now this panel looks
like it's only used by me on the MTK platform, so let's change this
set of parameters.
[ dianders: Added "(again") to subject and fixed the "Fixes" line ]
Fixes: cea7008190ad ("drm/panel: boe-tv101wum-nl6: Fine tune Himax83102-j02 panel HFP and HBP")
Signed-off-by: Cong Yang <yangcong5@huaqin.corp-partner.google.com>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240301061128.3145982-1-yangcong5@huaqin.corp-partner.google.com
The linear ranges aren't really matching what they should be. Indeed,
the range is inclusive of the min value, so it makes sense the previous
range does NOT include the max step value representing the min value of
the range in question.
Since 3.4V is represented by the decimal value 232, the previous range
max step value should be 231 and not 232.
No expected change in behavior since 3.4V was mapped with step 232 from
the first range but is now mapped with step 232 from the second range.
While at it, remove the incorrect comment from the second range.
Fixes: f991a220a447 ("regulator: rk808: add rk806 support")
Cc: Quentin Schulz <foss+kernel@0leil.net>
Signed-off-by: Quentin Schulz <quentin.schulz@theobroma-systems.com>
Link: https://msgid.link/r/20240223-rk806-regulator-ranges-v1-2-3904ab70d250@theobroma-systems.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The linear ranges aren't really matching what they should be. Indeed,
the range is inclusive of the min value, so it makes sense the previous
range does NOT include the max step value representing the min value of
the range in question.
Since 1.5V is represented by the decimal value 160, the previous range
max step value should be 159 and not 160. Similarly, 3.4V is represented
by the decimal value 236, so the previous range max value should be 235
and not 237.
The only change in behavior this makes is that this actually modeled
the ranges to map step with decimal value 237 with 3.65V instead of
3.4V (the max supported by the HW).
Fixes: f991a220a447 ("regulator: rk808: add rk806 support")
Cc: Quentin Schulz <foss+kernel@0leil.net>
Signed-off-by: Quentin Schulz <quentin.schulz@theobroma-systems.com>
Link: https://msgid.link/r/20240223-rk806-regulator-ranges-v1-1-3904ab70d250@theobroma-systems.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This contains two fixes to make the MGBE Ethernet devices found on
Tegra234 work properly.
-----BEGIN PGP SIGNATURE-----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=b7sU
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmXl2c0ACgkQYKtH/8kJ
UidOrw//WAoCu3ExvDZRQYD8JpiIuQ7kv35ABz83TeM8xcLCvxJMxEs9+h8BthRA
vrRpLh2clYD42xixQisD2ac4fxHvHgzssbuvlbj+lzE+TTKy3j5MAv/7OiR94GCy
yu2VSBd3ST45lN9XPnxN+R2fwP1rdn2ByfKrODUB0gCgbG6cCNVh+Ba3mbABwbN2
RaJ6eEH15bqZ/BKtuCpIPkf0M4AzSLRY4cjLKm6cOPGe2J515vUn9/1gqUDlXZyB
4lsiGwlpDJTey6szHxqzPFPMb+nLQJK7GM5tVq3s24DoJ2XFD6mhJSrpa5PYAVdB
5DF68fBNar+Oas9TYE3KOIVy6M1wat1ga5zaQIMwXmQHeHnyv32Gt4iEVGF6AUBC
v69Mj/VJ8NMGUTLd5S9tQ6ZQcl1TUC0SMHaavyVfbWxcIJ94u1sz5vheU0JGBcMW
DHsvVCZerv2q7IjhZ+DT0xyW6jCsWwqvmi0pj+3X+MiWt5k3tiK41HOCriX/IAwk
dYhwwMH+FbZTjoROG7UVc9I2SRGg6XP1FQ7/CCYidPoDcajii9UvaiVgXxQtzyEe
F3UahafQ5xMO0YLrDjgTp9Y/JscRbW0tI9LEQDx6QH3YAVmGR302jnWtNVA8SRoL
Mgs4lGKa45GuyvPbp7ToW/WjI2F0xtV33PmH0oU8vTbJqyyzJ5U=
=Ad8s
-----END PGP SIGNATURE-----
Merge tag 'tegra-for-6.8-arm64-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/fixes
arm64: tegra: Device tree fixes for v6.8
This contains two fixes to make the MGBE Ethernet devices found on
Tegra234 work properly.
* tag 'tegra-for-6.8-arm64-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
arm64: tegra: Fix Tegra234 MGBE power-domains
arm64: tegra: Set the correct PHY mode for MGBE
Link: https://lore.kernel.org/r/20240226144536.1525704-1-thierry.reding@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- Update MAINTAINERS to use a public mailing list for NXP i.MX
development.
- Re-enable CONFIG_BACKLIGHT_CLASS_DEVICE in imx_v6_v7_defconfig to fix
a backlight regression.
- Remove DSI port endpoints from i.MX7 SoC DTSI to fix a display
regression.
- Fix LDB clocks property for i.MX8MP device tree.
- Fix TC9595 reset GPIO on DH i.MX8M Plus DHCOM SoM.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCgAyFiEEFmJXigPl4LoGSz08UFdYWoewfM4FAmXbTckUHHNoYXduZ3Vv
QGtlcm5lbC5vcmcACgkQUFdYWoewfM78BQf9GRuY8jwenOGOoUFksUJrZzl6a/nl
glYzNyq4t4i91xDE9rU+GtoQe+DjWgKYftiR2pgHNv/uCKIPO+6D4yfLG/eyQet9
Z1kknUg6kUndiOaWaZ3FiiY3JUoUWHjaXw2REY8ksyVpRQ2fVtSOI2IeFtqIqFuQ
X1Fx7slntIcbGpbc3iGzZVTi7+ucShYjaVUWUd588iayQsXyHLqz/RxYRVlaErYF
BElc5Nm+Auw+8Mr+jz2Q71dn+qOI806V+IvqrTGX8PauCk9WsF/TsYcm6MzrhgKh
4N+NNpqLY11Ty9i+K6OS6qE77jVZ9xxe2UUk0qfa8xWujIGFlLpl3e8q8A==
=0xer
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=3Eab
-----END PGP SIGNATURE-----
Merge tag 'imx-fixes-6.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes
i.MX fixes for 6.8, round 2:
- Update MAINTAINERS to use a public mailing list for NXP i.MX
development.
- Re-enable CONFIG_BACKLIGHT_CLASS_DEVICE in imx_v6_v7_defconfig to fix
a backlight regression.
- Remove DSI port endpoints from i.MX7 SoC DTSI to fix a display
regression.
- Fix LDB clocks property for i.MX8MP device tree.
- Fix TC9595 reset GPIO on DH i.MX8M Plus DHCOM SoM.
* tag 'imx-fixes-6.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
arm64: dts: imx8mp: Fix LDB clocks property
arm64: dts: imx8mp: Fix TC9595 reset GPIO on DH i.MX8M Plus DHCOM SoM
MAINTAINERS: Use a proper mailinglist for NXP i.MX development
ARM: dts: imx7: remove DSI port endpoints
ARM: imx_v6_v7_defconfig: Restore CONFIG_BACKLIGHT_CLASS_DEVICE
Link: https://lore.kernel.org/r/ZdtPJzdenRybI+Bq@dragon
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This marks an additional GPIO as protected on SM8650 devices, to avoid
a system reset caused by a security violation with some firmware
versions.
It also adds the missing interconnect-names, which resolves a regression
where one of the I2C busses on SM6115 devices would no longer probe in
Linux.
-----BEGIN PGP SIGNATURE-----
iQJJBAABCAAzFiEEBd4DzF816k8JZtUlCx85Pw2ZrcUFAmXaqtsVHGFuZGVyc3Nv
bkBrZXJuZWwub3JnAAoJEAsfOT8Nma3FztYP/0zH8fB4JBYTxsPwO7/ZYuwPgWuF
HjfNIfmNyPq87u2GV3BXtTGIXNBZIJeC6gW9HJWYj67OaCJHWebZqwXbSFTveDr8
G60OwT4vO5SoEFgDv+y1Q5xlWZ1eurzplu/shH1J+aGzj3RSoBsZ/8wcmEszVQ8x
FO0pkPyrQY8I2kEfyYyAM1Q1rQe4STESP1ijEcZBFKdRRxQIyR/nxdz8V22wbmrf
kImpzCGX+IJj0Lu3klvsKwZVBLfksOiijRXDzangpoEW/Lnwjk2AWWYGNm/J3vCx
cfplkWVLGydPmNsoMlCghGA3Qq17lmD8nlXJLOVk14wa/urf4J6gZ03lu8vS9k/A
bAetQCqrPHq7FsGspxR/uZXjF2/9Zk2w+J7ASuhpu3cbssCJT7upBP7kexc2mjPv
ASgPpxtFhIdRoqNhQ/6dB/LTxIc0qv7OXKuXtqz0TpSiOtF2vGBpCjInAsmfNfWH
sSgJ8FtX6Iov4q7QWEt5zn4bdM4kRjaOipe98qGzSXW+BLVQm8ALx/G4WKemTS6i
+hIt5MJExhrvrNsbknCwvEAzBwmxO456N6vwMbgXJBdED/JtVDbCcgVjiq65ityZ
PY8gakw9u5oIvBTYWrRdVm9SJe/LBWxhIYNuWpSEuJh8tW6k4DH5oghxisKC7xt7
QzAjQhR9Aa7OUn6V
=XtCr
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmXl2W4ACgkQYKtH/8kJ
UidKTg//eshErspYoVmC9lMU+8vdrDD0rYdGX21OM7aHBMhp1iy5bbprQ7/BEfST
i7s83FzgpcTxes8FltEQW6u/uev/WrLCfQ77MF2aI/RC8awkMmKRSVjOjMedl/3C
aCrtIQJI8bMY4x9fLJPnSVG523wf5ekVWXiH6j4lY7zWGbecS0B4eL2vYC/RWXVT
WiF2g6/IUjxkYXk8mAxEbUA5SL1m92zjwUc39jRJQrVmVTb/zoVJr5rEIdXZ/El+
9/CK56Vg75ajGWQNwt2APyQR65NxH1nIgktYwiz9HcBK47fifnM8lpD0709HvT7c
8V8hZ0Tn7q2NbfCM3eCn2IoRgSFYPPtHFw3B/TakTW3ZxQUYYkdRyixNiulaAOkJ
sjcDuxYhQ2CsnAfhgblXd06Oqd/GlMTUFOyGxsydnWY73san2L3eWchczzAHSVoH
/IiiW0Q0QGiL0RjUDGvppxfBC7kzOWgfABp2jWPkwHU1yaVfNsLrUgh+EsDevS3m
C+d9/kYVVjgu1hTQGgTXPVMPVeDt1Weyuv6sYIlf6KnNchMXOFJfYzTXgYwxBtaU
CsAC23HSBV3EkuuRte3cbGrvyLTJsMOBEQ98zNHCa0Y9yVkdY5zWqDpi6qizX1KJ
si2Py/LwK68a+WdljcP05K/vMuqxNN7oV5w8DSSxC0O881Y6AAE=
=30J9
-----END PGP SIGNATURE-----
Merge tag 'qcom-arm64-fixes-for-6.8' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/fixes
Qualcomm ARM64 DeviceTree fixes for 6.8
This marks an additional GPIO as protected on SM8650 devices, to avoid
a system reset caused by a security violation with some firmware
versions.
It also adds the missing interconnect-names, which resolves a regression
where one of the I2C busses on SM6115 devices would no longer probe in
Linux.
* tag 'qcom-arm64-fixes-for-6.8' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
arm64: dts: qcom: sm6115: Fix missing interconnect-names
arm64: dts: qcom: sm8650-mtp: add gpio74 as reserved gpio
arm64: dts: qcom: sm8650-qrd: add gpio74 as reserved gpio
Link: https://lore.kernel.org/r/20240225025205.479589-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Matthieu Baerts says:
====================
selftests: mptcp: fixes for diag.sh
Here are two patches fixing issues in MPTCP diag.sh kselftest:
- Patch 1 makes sure the exit code is '1' in case of error, and not the
test ID, not to return an exit code that would be wrongly interpreted
by the ksefltests framework, e.g. '4' means 'skip'.
- Patch 2 avoids waiting for unnecessary conditions, which can cause
timeouts in some very slow environments.
====================
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
When creating a lot of listener sockets, it is enough to wait only for
the last one, like we are doing before in diag.sh for other subtests.
If we do a check for each listener sockets, each time listing all
available sockets, it can take a very long time in very slow
environments, at the point we can reach some timeout.
When using the debug kconfig, the waiting time switches from more than
8 sec to 0.1 sec on my side. In slow/busy environments, and with a poll
timeout set to 30 ms, the waiting time could go up to ~100 sec because
the listener socket would timeout and stop, while the script would still
be checking one by one if all sockets are ready. The result is that
after having waited for everything to be ready, all sockets have been
stopped due to a timeout, and it is too late for the script to check how
many there were.
While at it, also removed ss options we don't need: we only need the
filtering options, to count how many listener sockets have been created.
We don't need to ask ss to display internal TCP information, and the
memory if the output is dropped by the 'wc -l' command anyway.
Fixes: b4b51d36bbaa ("selftests: mptcp: explicitly trigger the listener diag code-path")
Reported-by: Jakub Kicinski <kuba@kernel.org>
Closes: https://lore.kernel.org/r/20240301063754.2ecefecf@kernel.org
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The test counter 'test_cnt' should not be returned in diag.sh, e.g. what
if only the 4th test fail? Will do 'exit 4' which is 'exit ${KSFT_SKIP}',
the whole test will be marked as skipped instead of 'failed'!
So we should do ret=${KSFT_FAIL} instead.
Fixes: df62f2ec3df6 ("selftests/mptcp: add diag interface tests")
Cc: stable@vger.kernel.org
Fixes: 42fb6cddec3b ("selftests: mptcp: more stable diag tests")
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
If drm_kms_helper_poll=n the output poll work will only get scheduled
from drm_helper_probe_single_connector_modes() to handle a delayed
hotplug event. Since polling is disabled the work in this case should
just call drm_kms_helper_hotplug_event() w/o detecting the state of
connectors and rescheduling the work.
After commit d33a54e3991d after a delayed hotplug event above the
connectors did get re-detected in the poll work and the work got
re-scheduled periodically (since poll_running is also false if
drm_kms_helper_poll=n), in effect ignoring the drm_kms_helper_poll=n
kernel param.
Fix the above by calling only drm_kms_helper_hotplug_event() for a
delayed hotplug event if drm_kms_helper_hotplug_event=n, as was done
before d33a54e3991d.
Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reported-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Fixes: d33a54e3991d ("drm/probe_helper: sort out poll_running vs poll_enabled")
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240301152243.1670573-1-imre.deak@intel.com
If message fills up we need to stop writing. 'break' will
only get us out of the iteration over pools of a single
netdev, we need to also stop walking netdevs.
This results in either infinite dump, or missing pools,
depending on whether message full happens on the last
netdev (infinite dump) or non-last (missing pools).
Fixes: 950ab53b77ab ("net: page_pool: implement GET in the netlink API")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
I'm updating __assign_str() and will be removing the second parameter. To
make sure that it does not break anything, I make sure that it matches the
__string() field, as that is where the string is actually going to be
saved in. To make sure there's nothing that breaks, I added a WARN_ON() to
make sure that what was used in __string() is the same that is used in
__assign_str().
In doing this change, an error was triggered as __assign_str() now expects
the string passed in to be a char * value. I instead had the following
warning:
include/trace/events/qdisc.h: In function ‘trace_event_raw_event_qdisc_reset’:
include/trace/events/qdisc.h:91:35: error: passing argument 1 of 'strcmp' from incompatible pointer type [-Werror=incompatible-pointer-types]
91 | __assign_str(dev, qdisc_dev(q));
That's because the qdisc_enqueue() and qdisc_reset() pass in qdisc_dev(q)
to __assign_str() and to __string(). But that function returns a pointer
to struct net_device and not a string.
It appears that these events are just saving the pointer as a string and
then reading it as a string as well.
Use qdisc_dev(q)->name to save the device instead.
Fixes: a34dac0b90552 ("net_sched: add tracepoints for qdisc_reset() and qdisc_destroy()")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Reviewed-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Whilst this laptop contains _DSD inside the BIOS, there is an error in
this configuration. Override the _DSD in the BIOS with the correct
configuration for this laptop.
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20240301160154.158398-4-sbinding@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
When not configured for wakeup lis3lv02d_i2c_suspend() will call
lis3lv02d_poweroff() even if the device has already been turned off
by the runtime-suspend handler and if configured for wakeup and
the device is runtime-suspended at this point then it is not turned
back on to serve as a wakeup source.
Before commit b1b9f7a49440 ("misc: lis3lv02d_i2c: Add missing setting
of the reg_ctrl callback"), lis3lv02d_poweroff() failed to disable
the regulators which as a side effect made calling poweroff() twice ok.
Now that poweroff() correctly disables the regulators, doing this twice
triggers a WARN() in the regulator core:
unbalanced disables for regulator-dummy
WARNING: CPU: 1 PID: 92 at drivers/regulator/core.c:2999 _regulator_disable
...
Fix lis3lv02d_i2c_suspend() to not call poweroff() a second time if
already runtime-suspended and add a poweron() call when necessary to
make wakeup work.
lis3lv02d_i2c_resume() has similar issues, with an added weirness that
it always powers on the device if it is runtime suspended, after which
the first runtime-resume will call poweron() again, causing the enabled
count for the regulator to increase by 1 every suspend/resume. These
unbalanced regulator_enable() calls cause the regulator to never
be turned off and trigger the following WARN() on driver unbind:
WARNING: CPU: 1 PID: 1724 at drivers/regulator/core.c:2396 _regulator_put
Fix this by making lis3lv02d_i2c_resume() mirror the new suspend().
Fixes: b1b9f7a49440 ("misc: lis3lv02d_i2c: Add missing setting of the reg_ctrl callback")
Reported-by: Paul Menzel <pmenzel@molgen.mpg.de>
Closes: https://lore.kernel.org/regressions/5fc6da74-af0a-4aac-b4d5-a000b39a63a5@molgen.mpg.de/
Cc: stable@vger.kernel.org
Cc: regressions@lists.linux.dev
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Tested-by: Paul Menzel <pmenzel@molgen.mpg.de> # Dell XPS 15 7590
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Link: https://lore.kernel.org/r/20240220190035.53402-1-hdegoede@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit 09896da07315 ("arm64: dts: qcom: msm8996: Hook up MPM") has
hooked up the MPM irq chip on the MSM8996 platform. However this causes
my Dragonboard 820c crash during bootup (usually when probing IOMMUs).
Revert the offending commit for now. Quick debug shows that making
tlmm's wakeup-parent point to the MPM is enough to trigger the crash.
Fixes: 09896da07315 ("arm64: dts: qcom: msm8996: Hook up MPM")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240221-msm8996-revert-mpm-v1-1-cdca9e30c9b4@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add additional HyperX device identifiers to xpad_device and xpad_table.
Suggested-by: Chris Toledanes<chris.toledanes@hp.com>
Reviewed-by: Carl Ng <carl.ng@hp.com>
Signed-off-by: Max Nguyen <maxwell.nguyen@hp.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/44ad5ffa-76d8-4046-94ee-2ef171930ed2@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Driver fixes for:
- dw-edma fixes to improve driver and remote HDMA setup
- fsl-edma fixes for SoC hange, irq init and byte calculations
and sparse fixes
- idxd: safe user copy of completion record fix
- ptdma: consistent DMA mask fix
-----BEGIN PGP SIGNATURE-----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=mX0o
-----END PGP SIGNATURE-----
Merge tag 'dmaengine-fix2-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine
Pull dmaengine fixes from Vinod Koul:
- dw-edma fixes to improve driver and remote HDMA setup
- fsl-edma fixes for SoC hange, irq init and byte calculations and
sparse fixes
- idxd: safe user copy of completion record fix
- ptdma: consistent DMA mask fix
* tag 'dmaengine-fix2-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine:
dmaengine: ptdma: use consistent DMA masks
dmaengine: fsl-qdma: add __iomem and struct in union to fix sparse warning
dmaengine: idxd: Ensure safe user copy of completion record
dmaengine: fsl-edma: correct max_segment_size setting
dmaengine: idxd: Remove shadow Event Log head stored in idxd
dmaengine: fsl-edma: correct calculation of 'nbytes' in multi-fifo scenario
dmaengine: fsl-qdma: init irq after reg initialization
dmaengine: fsl-qdma: fix SoC may hang on 16 byte unaligned read
dmaengine: dw-edma: eDMA: Add sync read before starting the DMA transfer in remote setup
dmaengine: dw-edma: HDMA: Add sync read before starting the DMA transfer in remote setup
dmaengine: dw-edma: Add HDMA remote interrupt configuration
dmaengine: dw-edma: HDMA_V0_REMOTEL_STOP_INT_EN typo fix
dmaengine: dw-edma: Fix wrong interrupt bit set for HDMA
dmaengine: dw-edma: Fix the ch_count hdma callback
- Fix IOMMU table initialisation when doing kdump over SR-IOV.
- Fix incorrect RTAS function name for resetting TCE tables.
- Fix fpu_signal selftest failures since a recent change.
Thanks to: Gaurav Batra, Nathan Lynch.
-----BEGIN PGP SIGNATURE-----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=MSDF
-----END PGP SIGNATURE-----
Merge tag 'powerpc-6.8-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
- Fix IOMMU table initialisation when doing kdump over SR-IOV
- Fix incorrect RTAS function name for resetting TCE tables
- Fix fpu_signal selftest failures since a recent change
Thanks to Gaurav Batra and Nathan Lynch.
* tag 'powerpc-6.8-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
selftests/powerpc: Fix fpu_signal failures
powerpc/rtas: use correct function name for resetting TCE tables
powerpc/pseries/iommu: IOMMU table is not initialized for kdump over SR-IOV
be used by kexec only
- Make sure MKTME feature detection happens at an earlier time in the
boot process so that the physical address size supported by the CPU is
properly corrected and MTRR masks are programmed properly, leading to
TDX systems booting without disable_mtrr_cleanup on the cmdline
- Make sure the different address sizes supported by the CPU are read
out as early as possible
-----BEGIN PGP SIGNATURE-----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=fmsi
-----END PGP SIGNATURE-----
Merge tag 'x86_urgent_for_v6.8_rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Borislav Petkov:
- Do not reserve SETUP_RNG_SEED setup data in the e820 map as it should
be used by kexec only
- Make sure MKTME feature detection happens at an earlier time in the
boot process so that the physical address size supported by the CPU
is properly corrected and MTRR masks are programmed properly, leading
to TDX systems booting without disable_mtrr_cleanup on the cmdline
- Make sure the different address sizes supported by the CPU are read
out as early as possible
* tag 'x86_urgent_for_v6.8_rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/e820: Don't reserve SETUP_RNG_SEED in e820
x86/cpu/intel: Detect TME keyid bits before setting MTRR mask registers
x86/cpu: Allow reducing x86_phys_bits during early_identify_cpu()
Now that the driver core can properly handle constant struct bus_type,
move the hv_bus variable to be a constant structure as well,
placing it into read-only memory which can not be modified at runtime.
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ricardo B. Marliere <ricardo@marliere.net>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Michael Kelley <mhklinux@outlook.com>
Link: https://lore.kernel.org/r/20240204-bus_cleanup-hv-v1-1-521bd4140673@marliere.net
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Message-ID: <20240204-bus_cleanup-hv-v1-1-521bd4140673@marliere.net>
A workaround to suppress the continuous bus resets in the case that older
devices are connected to the modern 1394 OHCI hardware and devices
In IEEE 1394 Amendment (IEEE 1394a-2000), the short bus reset is added to
resolve the shortcomings of the long bus reset in IEEE 1394-1995. However,
it is well-known that the solution is not necessarily effective in the
mixing environment that both IEEE 1394-1995 PHY and IEEE 1394a-2000 (or
later) PHY exist, as described in section 8.4.6.2 of IEEE 1394a-2000.
The current implementation of firewire stack schedules the short bus
reset when attempting to resolve the mismatch of gap count in the certain
generation of bus topology. It can cause the continuous bus reset in the
issued environment.
The workaround simply uses the long bus reset instead of the short bus
reset. It is desirable to detect whether the issued environment or not.
However, the way to access PHY registers from remote note is firstly
defined in IEEE 1394a-2000, thus it is not available in the case.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQQE66IEYNDXNBPeGKSsLtaWM8LwEwUCZeOqLAAKCRCsLtaWM8Lw
E2rLAQDJiYNXItCD0Q+RISEH7mtrfXmx/f4Tb1Uf9lBtKzOKIAD/Vn0H5WRrj5Qx
fuTb70AD2zRb4zpTM65hOdYBEQ4TnAE=
=T3IO
-----END PGP SIGNATURE-----
Merge tag 'firewire-fixes-6.8-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394
Pull firewire fixes from Takashi Sakamoto:
"A workaround to suppress the continuous bus resets in the case that
older devices are connected to the modern 1394 OHCI hardware and
devices
In IEEE 1394 Amendment (IEEE 1394a-2000), the short bus reset is added
to resolve the shortcomings of the long bus reset in IEEE 1394-1995.
However, it is well-known that the solution is not necessarily
effective in the mixing environment that both IEEE 1394-1995 PHY and
IEEE 1394a-2000 (or later) PHY exist, as described in section 8.4.6.2
of IEEE 1394a-2000.
The current implementation of firewire stack schedules the short bus
reset when attempting to resolve the mismatch of gap count in the
certain generation of bus topology. It can cause the continuous bus
reset in the issued environment.
The workaround simply uses the long bus reset instead of the short bus
reset. It is desirable to detect whether the issued environment or
not. However, the way to access PHY registers from remote note is
firstly defined in IEEE 1394a-2000, thus it is not available in the
case"
* tag 'firewire-fixes-6.8-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394:
firewire: core: use long bus reset on gap count error
This is the same issue that was fixed for the VGA text buffer in commit
39cdb68c64d8 ("vt: fix memory overlapping when deleting chars in the
buffer"). The cure is also the same i.e. replace memcpy() with memmove()
due to the overlaping buffers.
Signed-off-by: Nicolas Pitre <nico@fluxnic.net>
Fixes: 81732c3b2fed ("tty vt: Fix line garbage in virtual console on command line edition")
Cc: stable <stable@kernel.org>
Link: https://lore.kernel.org/r/sn184on2-3p0q-0qrq-0218-895349s4753o@syhkavp.arg
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We accidently met the issue that the bash prompt is not shown after the
previous command done and until the next input if there's only one CPU
(In our issue other CPUs are isolated by isolcpus=). Further analysis
shows it's because the port entering runtime suspend even if there's
still pending chars in the buffer and the pending chars will only be
processed in next device resuming. We are using amba-pl011 and the
problematic flow is like below:
Bash kworker
tty_write()
file_tty_write()
n_tty_write()
uart_write()
__uart_start()
pm_runtime_get() // wakeup waker
queue_work()
pm_runtime_work()
rpm_resume()
status = RPM_RESUMING
serial_port_runtime_resume()
port->ops->start_tx()
pl011_tx_chars()
uart_write_wakeup()
[…]
__uart_start()
pm_runtime_get() < 0 // because runtime status = RPM_RESUMING
// later data are not commit to the port driver
status = RPM_ACTIVE
rpm_idle() -> rpm_suspend()
This patch tries to fix this by checking the port busy before entering
runtime suspending. A runtime_suspend callback is added for the port
driver. When entering runtime suspend the callback is invoked, if there's
still pending chars in the buffer then flush the buffer.
Fixes: 84a9582fd203 ("serial: core: Start managing serial controllers to enable runtime PM")
Cc: stable <stable@kernel.org>
Reviewed-by: Tony Lindgren <tony@atomide.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Yicong Yang <yangyicong@hisilicon.com>
Link: https://lore.kernel.org/r/20240226152351.40924-1-yangyicong@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When userspace opens the console, we call set_termios() passing a
termios with the console's configured baud rate. Currently this causes
dw8250_set_termios() to disable and then re-enable the UART clock at
the same frequency as it was originally. This can cause corruption
of any concurrent console output. Fix it by skipping the reclocking
if we are already at the correct rate.
Signed-off-by: Peter Collingbourne <pcc@google.com>
Fixes: 4e26b134bd17 ("serial: 8250_dw: clock rate handling for all ACPI platforms")
Cc: stable@vger.kernel.org
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20240222192635.1050502-1-pcc@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When about to transmit the function imx_uart_start_tx is called and in
some RS485 configurations this function will call imx_uart_stop_rx. The
problem is that imx_uart_stop_rx will enable loopback in order to
release the RS485 bus, but when loopback is enabled transmitted data
will just be looped to RX.
This patch fixes the above problem by not enabling loopback when about
to transmit.
This driver now works well when used for RS485 half duplex master
configurations.
Fixes: 79d0224f6bf2 ("tty: serial: imx: Handle RS485 DE signal active high")
Cc: stable <stable@kernel.org>
Signed-off-by: Rickard x Andersson <rickaran@axis.com>
Tested-by: Christoph Niedermaier <cniedermaier@dh-electronics.com>
Link: https://lore.kernel.org/r/20240221115304.509811-1-rickaran@axis.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The isd200 sub-driver in usb-storage uses the HEADS and SECTORS values
in the ATA ID information to calculate cylinder and head values when
creating a CDB for READ or WRITE commands. The calculation involves
division and modulus operations, which will cause a crash if either of
these values is 0. While this never happens with a genuine device, it
could happen with a flawed or subversive emulation, as reported by the
syzbot fuzzer.
Protect against this possibility by refusing to bind to the device if
either the ATA_ID_HEADS or ATA_ID_SECTORS value in the device's ID
information is 0. This requires isd200_Initialization() to return a
negative error code when initialization fails; currently it always
returns 0 (even when there is an error).
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Reported-and-tested-by: syzbot+28748250ab47a8f04100@syzkaller.appspotmail.com
Link: https://lore.kernel.org/linux-usb/0000000000003eb868061245ba7f@google.com/
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Cc: stable@vger.kernel.org
Reviewed-by: PrasannaKumar Muralidharan <prasannatsmkumar@gmail.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/b1e605ea-333f-4ac0-9511-da04f411763e@rowland.harvard.edu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Given this is very late these can wait for the 6.9 cycle if you would
prefer.
adi,adxl367
- Sleep for 15ms after reset to avoid reading before the device is awake.
- Fix FIFO register address.
asc,dlhl60d
- Avoid uninitialized data leak to user-space. Also suppress a false
positive clang warning by refactoring a loop.
bosch,bmp280
- Fix missing extra byte in SPI reads from BMP38x and BMP390 parts
invensense,mpu6050
- Fix handing of empty FIFO which can happen due to a race condition.
- Make sure frequency can be updated more than once when the FIFO is not
enabled.
-----BEGIN PGP SIGNATURE-----
iQJFBAABCAAvFiEEbilms4eEBlKRJoGxVIU0mcT0FogFAmXg4zARHGppYzIzQGtl
cm5lbC5vcmcACgkQVIU0mcT0FojvOA/9ElIJd9yBUa4jMXI5802ehOH8DbKvbge1
3LKL9UpGphsaWqPnPsffRAlmAu0dZR52M5wfbiZqJnMHNK6soiXqOINsdYkHPVFk
7mb3mlnkZIA5H5mIaeHz+cwBK3xESryN8G8hEjtTLHh7TgBbq/ooEYbBIznJjIhx
3TMpqVQwi264L6vYbQ1gOuc9ordtAzBGqnxSRaBKO4InZpxMYz9M9gzqmLFuXlum
GPl7c8BhgoiqzD7p+V7nZh4FKlTw7++pdEdFEk28uU0rkMhtMYpC8nG5K9OJyvMM
HMvnxPgCzL/ig4oLP40W7va8CRZezA1Klw9V5iVfcqBF3rrv4ynPWTP6KeyUjCJU
qttftBkSrAt6S5f6pC/h9BCTYx/A76S05UHJ/ssjT/B65F+RMuVSgkNb6H+qtI4d
708BXTDSLTzOLKvzWW9r/0ZBmayZFyxAUFTfdISJUQu6ZGMYjZegzonSRrWm+bSJ
KxvboQ4y9MOH2w58xshv0GvbIqYKGsCXBnP2CKPmJ26jHeLzxl7IGDMwNWNabsWN
+1gKxRZjLov6/0CAP05K4p6iEB0frfndkXtbzvL+25Qhgx8uiVcFcblJ88CeNukG
BHXCwFV0k8HeiUTjSDEsNVu8Fk+JzjqZBHL193gED+srKazG+NK559b4ZElpTeSg
+rD65E/1w9k=
=RRmO
-----END PGP SIGNATURE-----
Merge tag 'iio-fixes-for-6.8b' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-linus
Jonathan writes:
IIO: 2nd set of fixes for the 6.8 cycle.
Given this is very late these can wait for the 6.9 cycle if you would
prefer.
adi,adxl367
- Sleep for 15ms after reset to avoid reading before the device is awake.
- Fix FIFO register address.
asc,dlhl60d
- Avoid uninitialized data leak to user-space. Also suppress a false
positive clang warning by refactoring a loop.
bosch,bmp280
- Fix missing extra byte in SPI reads from BMP38x and BMP390 parts
invensense,mpu6050
- Fix handing of empty FIFO which can happen due to a race condition.
- Make sure frequency can be updated more than once when the FIFO is not
enabled.
* tag 'iio-fixes-for-6.8b' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio:
iio: accel: adxl367: fix I2C FIFO data register
iio: accel: adxl367: fix DEVID read after reset
iio: pressure: dlhl60d: Initialize empty DLH bytes
iio: imu: inv_mpu6050: fix frequency setting when chip is off
iio: pressure: Fixes BMP38x and BMP390 SPI support
iio: imu: inv_mpu6050: fix FIFO parsing when empty
One fix to ensure private data in struct counter_device_allochelper has
minimum alignment for safe DMA operations.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQSNN83d4NIlKPjon7a1SFbKvhIjKwUCZdzmKQAKCRC1SFbKvhIj
K6lyAQCQBMlq+bM3YG4ZCDAx2gc0ZmtwNrI78oA5zmERGKzWwAEAtRra2zKXcoXS
T4Tp2inC73PJai84eVCGRbddKgG4vwQ=
=wVEq
-----END PGP SIGNATURE-----
Merge tag 'counter-fixes-for-6.8b' of https://git.kernel.org/pub/scm/linux/kernel/git/wbg/counter into char-misc-linus
William writes:
First set of Counter fixes for 6.8
One fix to ensure private data in struct counter_device_allochelper has
minimum alignment for safe DMA operations.
* tag 'counter-fixes-for-6.8b' of https://git.kernel.org/pub/scm/linux/kernel/git/wbg/counter:
counter: fix privdata alignment
This includes one USB4/Thunderbolt fix for v6.8-rc7:
- Fix NULL pointer dereference in tb_port_update_credits() on
Apple Thunderbolt 1 hardware.
This has been in linux-next with no reported issues.
-----BEGIN PGP SIGNATURE-----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=FddI
-----END PGP SIGNATURE-----
Merge tag 'thunderbolt-for-v6.8-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/westeri/thunderbolt into usb-linus
Mika writes:
thunderbolt: Fix for v6.8-rc7
This includes one USB4/Thunderbolt fix for v6.8-rc7:
- Fix NULL pointer dereference in tb_port_update_credits() on
Apple Thunderbolt 1 hardware.
This has been in linux-next with no reported issues.
* tag 'thunderbolt-for-v6.8-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/westeri/thunderbolt:
thunderbolt: Fix NULL pointer dereference in tb_port_update_credits()
* Drop experimental warning for FSDAX.
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQjMC4mbgVeU7MxEIYH7y4RirJu9AUCZd1uBAAKCRAH7y4RirJu
9Io/AP9+wwQRMgBT4gmCtUytpYgjZaEs8D3pVN+B9cV2OGzBzwD+Oek5ax/rKFRr
62gcdMwAIRX7AQMQTOdkcyp/q0UslgY=
=6sb7
-----END PGP SIGNATURE-----
Merge tag 'xfs-6.8-fixes-4' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull xfs fix from Chandan Babu:
"Drop experimental warning message when mounting an xfs filesystem on
an fsdax device. We now consider xfs on fsdax to be stable"
* tag 'xfs-6.8-fixes-4' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: drop experimental warning for FSDAX
- fix resource freeing ordering in error path when adding a GPIO chip
- only set pins to output after the reset is complete in gpio-74x164
-----BEGIN PGP SIGNATURE-----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=i27Z
-----END PGP SIGNATURE-----
Merge tag 'gpio-fixes-for-v6.8-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio fixes from Bartosz Golaszewski:
- fix resource freeing ordering in error path when adding a GPIO chip
- only set pins to output after the reset is complete in gpio-74x164
* tag 'gpio-fixes-for-v6.8-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
gpio: fix resource unwinding order in error path
gpiolib: Fix the error path order in gpiochip_add_data_with_key()
gpio: 74x164: Enable output pins after registers are reset
In commit 19416123ab3e ("block: define 'struct bvec_iter' as packed"),
what we need is to save the 4byte padding, and avoid `bio` to spread on
one extra cache line.
It is enough to define it as '__packed __aligned(4)', as '__packed'
alone means byte aligned, and can cause compiler to generate horrible
code on architectures that don't support unaligned access in case that
bvec_iter is embedded in other structures.
Cc: Mikulas Patocka <mpatocka@redhat.com>
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Fixes: 19416123ab3e ("block: define 'struct bvec_iter' as packed")
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Two small fixes, all in drivers (the more obsolete mpt3sas and the
newer mpi3mr).
Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCZeLhxiYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishe4aAQCe0pM9
Ssol+/GThNmtpEMBshFYFPJTEMJlJ3Sf6Jgm7AD/ZSikfS6wbyRw8xNKRBz7H/x/
Cpi/IMaJbyJgLb9+YKE=
=wUnX
-----END PGP SIGNATURE-----
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Two small fixes, all in drivers (the more obsolete mpt3sas and the
newer mpi3mr)"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: mpt3sas: Prevent sending diag_reset when the controller is ready
scsi: mpi3mr: Reduce stack usage in mpi3mr_refresh_sas_ports()
The NAPI poll context is a softirq context. Do not use normal spinlock API
in this context to prevent concurrency issues.
Fixes: 3178308ad4ca ("net/mlx5e: Make tx_port_ts logic resilient to out-of-order CQEs")
Signed-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
CC: Vadim Fedorenko <vadfed@meta.com>
Just simply reordering the functions mlx5e_ptp_metadata_map_put and
mlx5e_ptpsq_track_metadata in the mlx5e_txwqe_complete context is not good
enough since both the compiler and CPU are free to reorder these two
functions. If reordering does occur, the issue that was supposedly fixed by
7e3f3ba97e6c ("net/mlx5e: Track xmit submission to PTP WQ after populating
metadata map") will be seen. This will lead to NULL pointer dereferences in
mlx5e_ptpsq_mark_ts_cqes_undelivered in the NAPI polling context due to the
tracking list being populated before the metadata map.
Fixes: 7e3f3ba97e6c ("net/mlx5e: Track xmit submission to PTP WQ after populating metadata map")
Signed-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
CC: Vadim Fedorenko <vadfed@meta.com>
The packet number attribute of the SA is incremented by the device rather
than the software stack when enabling hardware offload. Because the packet
number attribute is managed by the hardware, the software has no insight
into the value of the packet number attribute actually written by the
device.
Previously when MACsec offload was enabled, the hardware object for
handling the offload was destroyed when the SA was disabled. Re-enabling
the SA would lead to a new hardware object being instantiated. This new
hardware object would not have any recollection of the correct packet
number for the SA. Instead, destroy the flow steering rule when
deactivating the SA and recreate it upon reactivation, preserving the
original hardware object.
Fixes: 8ff0ac5be144 ("net/mlx5: Add MACsec offload Tx command support")
Signed-off-by: Emeel Hakim <ehakim@nvidia.com>
Signed-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Reviewed-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Downgrade the print from mlx5_core_warn() to mlx5_core_dbg(), as it
is just a statement of fact that firmware doesn't support ignore flow
level.
And change the wording to "firmware flow level support is missing", to
make it more accurate.
Fixes: ae2ee3be99a8 ("net/mlx5: CT: Remove warning of ignore_flow_level support for VFs")
Signed-off-by: Jianbo Liu <jianbol@nvidia.com>
Suggested-by: Elliott, Robert (Servers) <elliott@hpe.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Functions which can't access MFRL (Management Firmware Reset Level)
register, have no use of fw_reset structures or events. Remove fw_reset
structures allocation and registration for fw reset events notifications
for these functions.
Having the devlink param enable_remote_dev_reset on functions that don't
have this capability is misleading as these functions are not allowed to
influence the reset flow. Hence, this patch removes this parameter for
such functions.
In addition, return not supported on devlink reload action fw_activate
for these functions.
Fixes: 38b9f903f22b ("net/mlx5: Handle sync reset request event")
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Aya Levin <ayal@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
