IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
These functions can all be static. Make them so. That also fixes no
previous prototype warnings:
arch/powerpc/platforms/amigaone/setup.c:28:6: error: no previous prototype for 'amigaone_show_cpuinfo'
arch/powerpc/platforms/amigaone/setup.c:68:13: error: no previous prototype for 'amigaone_setup_arch'
arch/powerpc/platforms/amigaone/setup.c:86:13: error: no previous prototype for 'amigaone_init_IRQ'
arch/powerpc/platforms/amigaone/setup.c:126:17: error: no previous prototype for 'amigaone_restart'
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240305123410.3306253-2-mpe@ellerman.id.au
Move the prototypes into mpc10x.h which is included by all the relevant
C files, fixes:
arch/powerpc/platforms/embedded6xx/ls_uart.c:59:6: error: no previous prototype for 'avr_uart_configure'
arch/powerpc/platforms/embedded6xx/ls_uart.c:82:6: error: no previous prototype for 'avr_uart_send'
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240305123410.3306253-1-mpe@ellerman.id.au
Replace all usages of of_root by of_find_node_by_path("/")
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20231214103152.12269-5-mpe@ellerman.id.au
Most probe functions that do not use the 'compatible' string do
nothing else than checking whether the machine is compatible with
one of the strings in a NULL terminated table of strings.
Define that table of strings in ppc_md structure and check it directly
from probe_machine() instead of using ppc_md.probe() for that.
Keep checking in ppc_md.probe() only for more complex probing.
All .compatible could be replaced with a single element NULL
terminated list but that's not worth the churn. Can be do incrementaly
in follow-up patches.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20231214103152.12269-4-mpe@ellerman.id.au
`buf` is allocated in papr_get_attr(), and krealloc() of `buf`
could fail. We need to free the original `buf` in the case of failure.
Fixes: 3c14b73454cf ("powerpc/pseries: Interface to represent PAPR firmware attributes")
Signed-off-by: Qiheng Lin <linqiheng@huawei.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20221208133449.16284-1-linqiheng@huawei.com
Some devices are not capable of addressing 64 bits
via DMA, which includes MSI-X vectors. This allows
us to ensure these devices use MSI-X vectors in
32 bit space.
Signed-off-by: Brian King <brking@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240117214632.134539-1-brking@linux.vnet.ibm.com
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/34847d756453af2e85e5944a8cc2e2c21aacc905.1708529736.git.u.kleine-koenig@pengutronix.de
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/28dd12b7cbde4b278b8b1d0ae4382dbd8ce9c9c5.1708529736.git.u.kleine-koenig@pengutronix.de
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/8a5ac8044578694879e919322dbd46f140b64950.1708529736.git.u.kleine-koenig@pengutronix.de
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/1e8396078942d9e46e56d70ed2f749a76391c381.1708529736.git.u.kleine-koenig@pengutronix.de
The PS3 hcall assembly code makes ad-hoc stack frames that don't have
a back-chain pointer or meet other requirements like minimum frame size.
This probably confuses stack unwinders. Give all hcalls a real stack
frame.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Tested-by: Geoff Levand <geoff@infradead.org>
[mpe: Add missing \ in LV1_2_IN_4_OUT]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20231227072405.63751-4-npiggin@gmail.com
The LRSAVE constant is required for assembly compiled for both 32-bit
and 64-bit, because the value differs there. PS3 is 64-bit only so
this is a noop, but it is nice to abstract stack frame offsets.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Tested-by: Geoff Levand <geoff@infradead.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20231227072405.63751-3-npiggin@gmail.com
Stack-passed parameters begin at a different offset in the caller's
stack in the ELFv2 ABI.
Reported-by: Geoff Levand <geoff@infradead.org>
Fixes: 8c5fa3b5c4df ("powerpc/64: Make ELFv2 the default for big-endian builds")
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Tested-by: Geoff Levand <geoff@infradead.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20231227072405.63751-2-npiggin@gmail.com
When an ifdef is used in the below manner, second one could be considered
as duplicate.
ifdef DEFINE_A
...code block...
ifdef DEFINE_A <-- This is a duplicate.
...code block...
endif
else
ifndef DEFINE_A <-- This is also duplicate.
...code block...
endif
endif
More details about the script and methods used to find these code
patterns are in cover letter of [1].
Few places in arch/powerpc where this pattern was seen:
paca.h:
Hunk1: Code is under check of CONFIG_PPC64 from line 13, hence the
second CONFIG_PPC64 at line 166 is a duplicate.
Hunk2: CONFIG_PPC_BOOK3S_64 was defined back to back. Merged the two
ifdefs.
asm-offsets.c:
Code is under check of CONFIG_PPC64 from line 176 hence second
CONFIG_PPC64 at line 249 is a duplicate.
powermac/feature.c:
#ifndef CONFIG_PPC64 is used at line 2066. And then in #else again
#ifdef CONFIG_PPC64 is used. Which is a duplicate since in #else means
CONFIG_PPC64 is defined.
xmon.c:
Code is under the check of CONFIG_SMP from line 521 hence the same
check of CONFIG_SMP at line 646 is a duplicate.
No functional change is intended here. It only aims to improve code
readability.
[1] https://lore.kernel.org/all/20240118080326.13137-1-sshegde@linux.ibm.com/
Signed-off-by: Shrikanth Hegde <sshegde@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240216053016.528906-1-sshegde@linux.ibm.com
Since commit d492cc2573a0 ("driver core: device.h: make struct
bus_type a const *"), the driver core can properly handle constant
struct bus_type, move the ibmebus_bus_type variable to be a constant
structure as well, placing it into read-only memory which can not be
modified at runtime.
Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: "Ricardo B. Marliere" <ricardo@marliere.net>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240212-bus_cleanup-powerpc2-v2-5-8441b3f77827@marliere.net
Since commit d492cc2573a0 ("driver core: device.h: make struct
bus_type a const *"), the driver core can properly handle constant
struct bus_type, move the vio_bus_type variable to be a constant
structure as well, placing it into read-only memory which can not be
modified at runtime.
Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: "Ricardo B. Marliere" <ricardo@marliere.net>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240212-bus_cleanup-powerpc2-v2-2-8441b3f77827@marliere.net
In order to make the distinction of the vio_bus_type variable based on
CONFIG_PPC_SMLPAR more explicit, move the required structs into a new
ifdef block. This is needed in order to make vio_bus_type const and
because the distinction is made explicit, there is no need to set the
fields within the vio_cmo_sysfs_init function.
Signed-off-by: "Ricardo B. Marliere" <ricardo@marliere.net>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240212-bus_cleanup-powerpc2-v2-1-8441b3f77827@marliere.net
Here is the big set of tty and serial driver changes for 6.8-rc1.
As usual, Jiri has a bunch of refactoring and cleanups for the tty core
and drivers in here, along with the usual set of rs485 updates (someday
this might work properly...) Along with those, in here are changes for:
- sc16is7xx serial driver updates
- platform driver removal api updates
- amba-pl011 driver updates
- tty driver binding updates
- other small tty/serial driver updates and changes
All of these have been in linux-next for a while with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZaeUaw8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ykyOgCgp1uhP/b9iW6qM7qL6OYEG6idI0kAnj0VASNm
vSI69HmdKKwo69YLOSBp
=14n1
-----END PGP SIGNATURE-----
Merge tag 'tty-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty / serial updates from Greg KH:
"Here is the big set of tty and serial driver changes for 6.8-rc1.
As usual, Jiri has a bunch of refactoring and cleanups for the tty
core and drivers in here, along with the usual set of rs485 updates
(someday this might work properly...)
Along with those, in here are changes for:
- sc16is7xx serial driver updates
- platform driver removal api updates
- amba-pl011 driver updates
- tty driver binding updates
- other small tty/serial driver updates and changes
All of these have been in linux-next for a while with no reported
issues"
* tag 'tty-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (197 commits)
serial: sc16is7xx: refactor EFR lock
serial: sc16is7xx: reorder code to remove prototype declarations
serial: sc16is7xx: refactor FIFO access functions to increase commonality
serial: sc16is7xx: drop unneeded MODULE_ALIAS
serial: sc16is7xx: replace hardcoded divisor value with BIT() macro
serial: sc16is7xx: add explicit return for some switch default cases
serial: sc16is7xx: add macro for max number of UART ports
serial: sc16is7xx: add driver name to struct uart_driver
serial: sc16is7xx: use i2c_get_match_data()
serial: sc16is7xx: use spi_get_device_match_data()
serial: sc16is7xx: use DECLARE_BITMAP for sc16is7xx_lines bitfield
serial: sc16is7xx: improve do/while loop in sc16is7xx_irq()
serial: sc16is7xx: remove obsolete loop in sc16is7xx_port_irq()
serial: sc16is7xx: set safe default SPI clock frequency
serial: sc16is7xx: add check for unsupported SPI modes during probe
serial: sc16is7xx: fix invalid sc16is7xx_lines bitfield in case of probe error
serial: 8250_exar: Set missing rs485_supported flag
serial: omap: do not override settings for RS485 support
serial: core, imx: do not set RS485 enabled if it is not supported
serial: core: make sure RS485 cannot be enabled when it is not supported
...
change of locking rules for __dentry_kill(), regularized refcounting
rules in that area, assorted cleanups and removal of weird corner
cases (e.g. now ->d_iput() on child is always called before the parent
might hit __dentry_kill(), etc.)
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQqUNBr3gm4hGXdBJlZ7Krx/gZQ6wUCZZ+sQQAKCRBZ7Krx/gZQ
6ybjAQDM5jiS93IUzfHjCWq0nVBX5YGbDAkZOeqxbmIdQb+2UAEA6elP5r0fBBcA
seo3bry4DirQMDaA/Cjh4+8r71YSOQs=
=7+Hk
-----END PGP SIGNATURE-----
Merge tag 'pull-dcache' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull dcache updates from Al Viro:
"Change of locking rules for __dentry_kill(), regularized refcounting
rules in that area, assorted cleanups and removal of weird corner
cases (e.g. now ->d_iput() on child is always called before the parent
might hit __dentry_kill(), etc)"
* tag 'pull-dcache' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (40 commits)
dcache: remove unnecessary NULL check in dget_dlock()
kill DCACHE_MAY_FREE
__d_unalias() doesn't use inode argument
d_alloc_parallel(): in-lookup hash insertion doesn't need an RCU variant
get rid of DCACHE_GENOCIDE
d_genocide(): move the extern into fs/internal.h
simple_fill_super(): don't bother with d_genocide() on failure
nsfs: use d_make_root()
d_alloc_pseudo(): move setting ->d_op there from the (sole) caller
kill d_instantate_anon(), fold __d_instantiate_anon() into remaining caller
retain_dentry(): introduce a trimmed-down lockless variant
__dentry_kill(): new locking scheme
d_prune_aliases(): use a shrink list
switch select_collect{,2}() to use of to_shrink_list()
to_shrink_list(): call only if refcount is 0
fold dentry_kill() into dput()
don't try to cut corners in shrink_lock_dentry()
fold the call of retain_dentry() into fast_dput()
Call retain_dentry() with refcount 0
dentry_kill(): don't bother with retain_dentry() on slow path
...
are included in this merge do the following:
- Peng Zhang has done some mapletree maintainance work in the
series
"maple_tree: add mt_free_one() and mt_attr() helpers"
"Some cleanups of maple tree"
- In the series "mm: use memmap_on_memory semantics for dax/kmem"
Vishal Verma has altered the interworking between memory-hotplug
and dax/kmem so that newly added 'device memory' can more easily
have its memmap placed within that newly added memory.
- Matthew Wilcox continues folio-related work (including a few
fixes) in the patch series
"Add folio_zero_tail() and folio_fill_tail()"
"Make folio_start_writeback return void"
"Fix fault handler's handling of poisoned tail pages"
"Convert aops->error_remove_page to ->error_remove_folio"
"Finish two folio conversions"
"More swap folio conversions"
- Kefeng Wang has also contributed folio-related work in the series
"mm: cleanup and use more folio in page fault"
- Jim Cromie has improved the kmemleak reporting output in the
series "tweak kmemleak report format".
- In the series "stackdepot: allow evicting stack traces" Andrey
Konovalov to permits clients (in this case KASAN) to cause
eviction of no longer needed stack traces.
- Charan Teja Kalla has fixed some accounting issues in the page
allocator's atomic reserve calculations in the series "mm:
page_alloc: fixes for high atomic reserve caluculations".
- Dmitry Rokosov has added to the samples/ dorectory some sample
code for a userspace memcg event listener application. See the
series "samples: introduce cgroup events listeners".
- Some mapletree maintanance work from Liam Howlett in the series
"maple_tree: iterator state changes".
- Nhat Pham has improved zswap's approach to writeback in the
series "workload-specific and memory pressure-driven zswap
writeback".
- DAMON/DAMOS feature and maintenance work from SeongJae Park in
the series
"mm/damon: let users feed and tame/auto-tune DAMOS"
"selftests/damon: add Python-written DAMON functionality tests"
"mm/damon: misc updates for 6.8"
- Yosry Ahmed has improved memcg's stats flushing in the series
"mm: memcg: subtree stats flushing and thresholds".
- In the series "Multi-size THP for anonymous memory" Ryan Roberts
has added a runtime opt-in feature to transparent hugepages which
improves performance by allocating larger chunks of memory during
anonymous page faults.
- Matthew Wilcox has also contributed some cleanup and maintenance
work against eh buffer_head code int he series "More buffer_head
cleanups".
- Suren Baghdasaryan has done work on Andrea Arcangeli's series
"userfaultfd move option". UFFDIO_MOVE permits userspace heap
compaction algorithms to move userspace's pages around rather than
UFFDIO_COPY'a alloc/copy/free.
- Stefan Roesch has developed a "KSM Advisor", in the series
"mm/ksm: Add ksm advisor". This is a governor which tunes KSM's
scanning aggressiveness in response to userspace's current needs.
- Chengming Zhou has optimized zswap's temporary working memory
use in the series "mm/zswap: dstmem reuse optimizations and
cleanups".
- Matthew Wilcox has performed some maintenance work on the
writeback code, both code and within filesystems. The series is
"Clean up the writeback paths".
- Andrey Konovalov has optimized KASAN's handling of alloc and
free stack traces for secondary-level allocators, in the series
"kasan: save mempool stack traces".
- Andrey also performed some KASAN maintenance work in the series
"kasan: assorted clean-ups".
- David Hildenbrand has gone to town on the rmap code. Cleanups,
more pte batching, folio conversions and more. See the series
"mm/rmap: interface overhaul".
- Kinsey Ho has contributed some maintenance work on the MGLRU
code in the series "mm/mglru: Kconfig cleanup".
- Matthew Wilcox has contributed lruvec page accounting code
cleanups in the series "Remove some lruvec page accounting
functions".
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZZyF2wAKCRDdBJ7gKXxA
jjWjAP42LHvGSjp5M+Rs2rKFL0daBQsrlvy6/jCHUequSdWjSgEAmOx7bc5fbF27
Oa8+DxGM9C+fwqZ/7YxU2w/WuUmLPgU=
=0NHs
-----END PGP SIGNATURE-----
Merge tag 'mm-stable-2024-01-08-15-31' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
"Many singleton patches against the MM code. The patch series which are
included in this merge do the following:
- Peng Zhang has done some mapletree maintainance work in the series
'maple_tree: add mt_free_one() and mt_attr() helpers'
'Some cleanups of maple tree'
- In the series 'mm: use memmap_on_memory semantics for dax/kmem'
Vishal Verma has altered the interworking between memory-hotplug
and dax/kmem so that newly added 'device memory' can more easily
have its memmap placed within that newly added memory.
- Matthew Wilcox continues folio-related work (including a few fixes)
in the patch series
'Add folio_zero_tail() and folio_fill_tail()'
'Make folio_start_writeback return void'
'Fix fault handler's handling of poisoned tail pages'
'Convert aops->error_remove_page to ->error_remove_folio'
'Finish two folio conversions'
'More swap folio conversions'
- Kefeng Wang has also contributed folio-related work in the series
'mm: cleanup and use more folio in page fault'
- Jim Cromie has improved the kmemleak reporting output in the series
'tweak kmemleak report format'.
- In the series 'stackdepot: allow evicting stack traces' Andrey
Konovalov to permits clients (in this case KASAN) to cause eviction
of no longer needed stack traces.
- Charan Teja Kalla has fixed some accounting issues in the page
allocator's atomic reserve calculations in the series 'mm:
page_alloc: fixes for high atomic reserve caluculations'.
- Dmitry Rokosov has added to the samples/ dorectory some sample code
for a userspace memcg event listener application. See the series
'samples: introduce cgroup events listeners'.
- Some mapletree maintanance work from Liam Howlett in the series
'maple_tree: iterator state changes'.
- Nhat Pham has improved zswap's approach to writeback in the series
'workload-specific and memory pressure-driven zswap writeback'.
- DAMON/DAMOS feature and maintenance work from SeongJae Park in the
series
'mm/damon: let users feed and tame/auto-tune DAMOS'
'selftests/damon: add Python-written DAMON functionality tests'
'mm/damon: misc updates for 6.8'
- Yosry Ahmed has improved memcg's stats flushing in the series 'mm:
memcg: subtree stats flushing and thresholds'.
- In the series 'Multi-size THP for anonymous memory' Ryan Roberts
has added a runtime opt-in feature to transparent hugepages which
improves performance by allocating larger chunks of memory during
anonymous page faults.
- Matthew Wilcox has also contributed some cleanup and maintenance
work against eh buffer_head code int he series 'More buffer_head
cleanups'.
- Suren Baghdasaryan has done work on Andrea Arcangeli's series
'userfaultfd move option'. UFFDIO_MOVE permits userspace heap
compaction algorithms to move userspace's pages around rather than
UFFDIO_COPY'a alloc/copy/free.
- Stefan Roesch has developed a 'KSM Advisor', in the series 'mm/ksm:
Add ksm advisor'. This is a governor which tunes KSM's scanning
aggressiveness in response to userspace's current needs.
- Chengming Zhou has optimized zswap's temporary working memory use
in the series 'mm/zswap: dstmem reuse optimizations and cleanups'.
- Matthew Wilcox has performed some maintenance work on the writeback
code, both code and within filesystems. The series is 'Clean up the
writeback paths'.
- Andrey Konovalov has optimized KASAN's handling of alloc and free
stack traces for secondary-level allocators, in the series 'kasan:
save mempool stack traces'.
- Andrey also performed some KASAN maintenance work in the series
'kasan: assorted clean-ups'.
- David Hildenbrand has gone to town on the rmap code. Cleanups, more
pte batching, folio conversions and more. See the series 'mm/rmap:
interface overhaul'.
- Kinsey Ho has contributed some maintenance work on the MGLRU code
in the series 'mm/mglru: Kconfig cleanup'.
- Matthew Wilcox has contributed lruvec page accounting code cleanups
in the series 'Remove some lruvec page accounting functions'"
* tag 'mm-stable-2024-01-08-15-31' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (361 commits)
mm, treewide: rename MAX_ORDER to MAX_PAGE_ORDER
mm, treewide: introduce NR_PAGE_ORDERS
selftests/mm: add separate UFFDIO_MOVE test for PMD splitting
selftests/mm: skip test if application doesn't has root privileges
selftests/mm: conform test to TAP format output
selftests: mm: hugepage-mmap: conform to TAP format output
selftests/mm: gup_test: conform test to TAP format output
mm/selftests: hugepage-mremap: conform test to TAP format output
mm/vmstat: move pgdemote_* out of CONFIG_NUMA_BALANCING
mm: zsmalloc: return -ENOSPC rather than -EINVAL in zs_malloc while size is too large
mm/memcontrol: remove __mod_lruvec_page_state()
mm/khugepaged: use a folio more in collapse_file()
slub: use a folio in __kmalloc_large_node
slub: use folio APIs in free_large_kmalloc()
slub: use alloc_pages_node() in alloc_slab_page()
mm: remove inc/dec lruvec page state functions
mm: ratelimit stat flush from workingset shrinker
kasan: stop leaking stack trace handles
mm/mglru: remove CONFIG_TRANSPARENT_HUGEPAGE
mm/mglru: add dummy pmd_dirty()
...
- Add initial support to recognise the HeXin C2000 processor.
- Add papr-vpd and papr-sysparm character device drivers for VPD & sysparm
retrieval, so userspace tools can be adapted to avoid doing raw firmware
calls from userspace.
- Sched domains optimisations for shared processor partitions on P9/P10.
- A series of optimisations for KVM running as a nested HV under PowerVM.
- Other small features and fixes.
Thanks to: Aditya Gupta, Aneesh Kumar K.V, Arnd Bergmann, Christophe Leroy,
Colin Ian King, Dario Binacchi, David Heidelberg, Geoff Levand, Gustavo A.
R. Silva, Haoran Liu, Jordan Niethe, Kajol Jain, Kevin Hao, Kunwu Chan, Li
kunyu, Li zeming, Masahiro Yamada, Michal Suchánek, Nathan Lynch, Naveen N Rao,
Nicholas Piggin, Randy Dunlap, Sathvika Vasireddy, Srikar Dronamraju, Stephen
Rothwell, Vaibhav Jain, Zhao Ke.
-----BEGIN PGP SIGNATURE-----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=LjlQ
-----END PGP SIGNATURE-----
Merge tag 'powerpc-6.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates from Michael Ellerman:
- Add initial support to recognise the HeXin C2000 processor.
- Add papr-vpd and papr-sysparm character device drivers for VPD &
sysparm retrieval, so userspace tools can be adapted to avoid doing
raw firmware calls from userspace.
- Sched domains optimisations for shared processor partitions on
P9/P10.
- A series of optimisations for KVM running as a nested HV under
PowerVM.
- Other small features and fixes.
Thanks to Aditya Gupta, Aneesh Kumar K.V, Arnd Bergmann, Christophe
Leroy, Colin Ian King, Dario Binacchi, David Heidelberg, Geoff Levand,
Gustavo A. R. Silva, Haoran Liu, Jordan Niethe, Kajol Jain, Kevin Hao,
Kunwu Chan, Li kunyu, Li zeming, Masahiro Yamada, Michal Suchánek,
Nathan Lynch, Naveen N Rao, Nicholas Piggin, Randy Dunlap, Sathvika
Vasireddy, Srikar Dronamraju, Stephen Rothwell, Vaibhav Jain, and
Zhao Ke.
* tag 'powerpc-6.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (96 commits)
powerpc/ps3_defconfig: Disable PPC64_BIG_ENDIAN_ELF_ABI_V2
powerpc/86xx: Drop unused CONFIG_MPC8610
powerpc/powernv: Add error handling to opal_prd_range_is_valid
selftests/powerpc: Fix spelling mistake "EACCESS" -> "EACCES"
powerpc/hvcall: Reorder Nestedv2 hcall opcodes
powerpc/ps3: Add missing set_freezable() for ps3_probe_thread()
powerpc/mpc83xx: Use wait_event_freezable() for freezable kthread
powerpc/mpc83xx: Add the missing set_freezable() for agent_thread_fn()
powerpc/fsl: Fix fsl,tmu-calibration to match the schema
powerpc/smp: Dynamically build Powerpc topology
powerpc/smp: Avoid asym packing within thread_group of a core
powerpc/smp: Add __ro_after_init attribute
powerpc/smp: Disable MC domain for shared processor
powerpc/smp: Enable Asym packing for cores on shared processor
powerpc/sched: Cleanup vcpu_is_preempted()
powerpc: add cpu_spec.cpu_features to vmcoreinfo
powerpc/imc-pmu: Add a null pointer check in update_events_in_group()
powerpc/powernv: Add a null pointer check in opal_powercap_init()
powerpc/powernv: Add a null pointer check in opal_event_init()
powerpc/powernv: Add a null pointer check to scom_debug_init_one()
...
commit 23baf831a32c ("mm, treewide: redefine MAX_ORDER sanely") has
changed the definition of MAX_ORDER to be inclusive. This has caused
issues with code that was not yet upstream and depended on the previous
definition.
To draw attention to the altered meaning of the define, rename MAX_ORDER
to MAX_PAGE_ORDER.
Link: https://lkml.kernel.org/r/20231228144704.14033-2-kirill.shutemov@linux.intel.com
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The MPC8610 symbol used to be default y if MPC8610_HPCD, but since
MPC8610_HPCD was removed MPC8610 is now never used. Remove it.
Fixes: 248667f8bbde ("powerpc: drop HPCD/MPC8610 evaluation platform support")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20231123032902.2760818-1-mpe@ellerman.id.au
In the opal_prd_range_is_valid function within opal-prd.c,
error handling was missing for the of_get_address call.
This patch adds necessary error checking, ensuring that the
function gracefully handles scenarios where of_get_address fails.
Signed-off-by: Haoran Liu <liuhaoran14@163.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20231127144108.29782-1-liuhaoran14@163.com
The kernel thread function ps3_probe_thread() invokes the try_to_freeze()
in its loop. But all the kernel threads are non-freezable by default.
So if we want to make a kernel thread to be freezable, we have to invoke
set_freezable() explicitly.
Signed-off-by: Kevin Hao <haokexin@gmail.com>
Acked-by: Geoff Levand <geoff@infradead.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20231221044510.1802429-4-haokexin@gmail.com
A freezable kernel thread can enter frozen state during freezing by
either calling try_to_freeze() or using wait_event_freezable() and its
variants. So for the following snippet of code in a kernel thread loop:
wait_event_interruptible();
try_to_freeze();
We can change it to a simple wait_event_freezable() and then eliminate
a function call.
Signed-off-by: Kevin Hao <haokexin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20231221044510.1802429-3-haokexin@gmail.com
The kernel thread function agent_thread_fn() invokes the try_to_freeze()
in its loop. But all the kernel threads are non-freezable by default.
So if we want to make a kernel thread to be freezable, we have to invoke
set_freezable() explicitly.
Signed-off-by: Kevin Hao <haokexin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20231221044510.1802429-2-haokexin@gmail.com
kasprintf() returns a pointer to dynamically allocated memory
which can be NULL upon failure.
Fixes: b9ef7b4b867f ("powerpc: Convert to using %pOFn instead of device_node.name")
Signed-off-by: Kunwu Chan <chentao@kylinos.cn>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20231126095739.1501990-1-chentao@kylinos.cn
kasprintf() returns a pointer to dynamically allocated memory
which can be NULL upon failure.
Fixes: 2717a33d6074 ("powerpc/opal-irqchip: Use interrupt names if present")
Signed-off-by: Kunwu Chan <chentao@kylinos.cn>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20231127030755.1546750-1-chentao@kylinos.cn
kasprintf() returns a pointer to dynamically allocated memory
which can be NULL upon failure.
Add a null pointer check, and release 'ent' to avoid memory leaks.
Fixes: bfd2f0d49aef ("powerpc/powernv: Get rid of old scom_controller abstraction")
Signed-off-by: Kunwu Chan <chentao@kylinos.cn>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20231208085937.107210-1-chentao@kylinos.cn
The hypervisor returns migration failure if all VAS windows are not
closed. During pre-migration stage, vas_migration_handler() sets
migration_in_progress flag and closes all windows from the list.
The allocate VAS window routine checks the migration flag, setup
the window and then add it to the list. So there is possibility of
the migration handler missing the window that is still in the
process of setup.
t1: Allocate and open VAS t2: Migration event
window
lock vas_pseries_mutex
If migration_in_progress set
unlock vas_pseries_mutex
return
open window HCALL
unlock vas_pseries_mutex
Modify window HCALL lock vas_pseries_mutex
setup window migration_in_progress=true
Closes all windows from the list
// May miss windows that are
// not in the list
unlock vas_pseries_mutex
lock vas_pseries_mutex return
if nr_closed_windows == 0
// No DLPAR CPU or migration
add window to the list
// Window will be added to the
// list after the setup is completed
unlock vas_pseries_mutex
return
unlock vas_pseries_mutex
Close VAS window
// due to DLPAR CPU or migration
return -EBUSY
This patch resolves the issue with the following steps:
- Set the migration_in_progress flag without holding mutex.
- Introduce nr_open_wins_progress counter in VAS capabilities
struct
- This counter tracks the number of open windows are still in
progress
- The allocate setup window thread closes windows if the migration
is set and decrements nr_open_window_progress counter
- The migration handler waits for no in-progress open windows.
The code flow with the fix is as follows:
t1: Allocate and open VAS t2: Migration event
window
lock vas_pseries_mutex
If migration_in_progress set
unlock vas_pseries_mutex
return
open window HCALL
nr_open_wins_progress++
// Window opened, but not
// added to the list yet
unlock vas_pseries_mutex
Modify window HCALL migration_in_progress=true
setup window lock vas_pseries_mutex
Closes all windows from the list
While nr_open_wins_progress {
unlock vas_pseries_mutex
lock vas_pseries_mutex sleep
if nr_closed_windows == 0 // Wait if any open window in
or migration is not started // progress. The open window
// No DLPAR CPU or migration // thread closes the window without
add window to the list // adding to the list and return if
nr_open_wins_progress-- // the migration is in progress.
unlock vas_pseries_mutex
return
Close VAS window
nr_open_wins_progress--
unlock vas_pseries_mutex
return -EBUSY lock vas_pseries_mutex
}
unlock vas_pseries_mutex
return
Fixes: 37e6764895ef ("powerpc/pseries/vas: Add VAS migration handler")
Signed-off-by: Haren Myneni <haren@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20231125235104.3405008-1-haren@linux.ibm.com
Until now the papr_sysparm APIs have been kernel-internal. But user
space needs access to PAPR system parameters too. The only method
available to user space today to get or set system parameters is using
sys_rtas() and /dev/mem to pass RTAS-addressable buffers between user
space and firmware. This is incompatible with lockdown and should be
deprecated.
So provide an alternative ABI to user space in the form of a
/dev/papr-sysparm character device with just two ioctl commands (get
and set). The data payloads involved are small enough to fit in the
ioctl argument buffer, making the code relatively simple.
Exposing the system parameters through sysfs has been considered but
it would be too awkward:
* The kernel currently does not have to contain an exhaustive list of
defined system parameters. This is a convenient property to maintain
because we don't have to update the kernel whenever a new parameter
is added to PAPR. Exporting a named attribute in sysfs for each
parameter would negate this.
* Some system parameters are text-based and some are not.
* Retrieval of at least one system parameter requires input data,
which a simple read-oriented interface can't support.
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20231212-papr-sys_rtas-vs-lockdown-v6-11-e9eafd0c8c6c@linux.ibm.com
The ability to get and set system parameters will be exposed to user
space, so let's get a little more strict about malformed
papr_sysparm_buf objects.
* Create accessors for the length field of struct papr_sysparm_buf.
The length is always stored in MSB order and this is better than
spreading the necessary conversions all over.
* Reject attempts to submit invalid buffers to RTAS.
* Warn if RTAS returns a buffer with an invalid length, clamping the
returned length to a safe value that won't overrun the buffer.
These are meant as precautionary measures to mitigate both firmware
and kernel bugs in this area, should they arise, but I am not aware of
any.
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20231212-papr-sys_rtas-vs-lockdown-v6-10-e9eafd0c8c6c@linux.ibm.com
PowerVM LPARs may retrieve Vital Product Data (VPD) for system
components using the ibm,get-vpd RTAS function.
We can expose this to user space with a /dev/papr-vpd character
device, where the programming model is:
struct papr_location_code plc = { .str = "", }; /* obtain all VPD */
int devfd = open("/dev/papr-vpd", O_RDONLY);
int vpdfd = ioctl(devfd, PAPR_VPD_CREATE_HANDLE, &plc);
size_t size = lseek(vpdfd, 0, SEEK_END);
char *buf = malloc(size);
pread(devfd, buf, size, 0);
When a file descriptor is obtained from ioctl(PAPR_VPD_CREATE_HANDLE),
the file contains the result of a complete ibm,get-vpd sequence. The
file contents are immutable from the POV of user space. To get a new
view of the VPD, the client must create a new handle.
This design choice insulates user space from most of the complexities
that ibm,get-vpd brings:
* ibm,get-vpd must be called more than once to obtain complete
results.
* Only one ibm,get-vpd call sequence should be in progress at a time;
interleaved sequences will disrupt each other. Callers must have a
protocol for serializing their use of the function.
* A call sequence in progress may receive a "VPD changed, try again"
status, requiring the client to abandon the sequence and start
over.
The memory required for the VPD buffers seems acceptable, around 20KB
for all VPD on one of my systems. And the value of the
/rtas/ibm,vpd-size DT property (the estimated maximum size of VPD) is
consistently 300KB across various systems I've checked.
I've implemented support for this new ABI in the rtas_get_vpd()
function in librtas, which the vpdupdate command currently uses to
populate its VPD database. I've verified that an unmodified vpdupdate
binary generates an identical database when using a librtas.so that
prefers the new ABI.
Along with the papr-vpd.h header exposed to user space, this
introduces a common papr-miscdev.h uapi header to share a base ioctl
ID with similar drivers to come.
Tested-by: Michal Suchánek <msuchanek@suse.de>
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20231212-papr-sys_rtas-vs-lockdown-v6-9-e9eafd0c8c6c@linux.ibm.com
Switch character types to u8 and sizes to size_t. To conform to
characters/sizes in the rest of the tty layer.
Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Amit Shah <amit@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: linuxppc-dev@lists.ozlabs.org
Cc: virtualization@lists.linux.dev
Cc: linux-riscv@lists.infradead.org
Link: https://lore.kernel.org/r/20231206073712.17776-13-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When an add operation for multiple LMBs fails, there is currently
little indication from the kernel of what went wrong. Be a little more
verbose about error conditions in the add paths.
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20231114-pseries-memhp-fixes-v1-3-fb8f2bb7c557@linux.ibm.com
dlpar_memory_remove_by_index() may access beyond the bounds of the
drmem lmb array when the LMB lookup fails to match an entry with the
given DRC index. When the search fails, the cursor is left pointing to
&drmem_info->lmbs[drmem_info->n_lmbs], which is one element past the
last valid entry in the array. The debug message at the end of the
function then dereferences this pointer:
pr_debug("Failed to hot-remove memory at %llx\n",
lmb->base_addr);
This was found by inspection and confirmed with KASAN:
pseries-hotplug-mem: Attempting to hot-remove LMB, drc index 1234
==================================================================
BUG: KASAN: slab-out-of-bounds in dlpar_memory+0x298/0x1658
Read of size 8 at addr c000000364e97fd0 by task bash/949
dump_stack_lvl+0xa4/0xfc (unreliable)
print_report+0x214/0x63c
kasan_report+0x140/0x2e0
__asan_load8+0xa8/0xe0
dlpar_memory+0x298/0x1658
handle_dlpar_errorlog+0x130/0x1d0
dlpar_store+0x18c/0x3e0
kobj_attr_store+0x68/0xa0
sysfs_kf_write+0xc4/0x110
kernfs_fop_write_iter+0x26c/0x390
vfs_write+0x2d4/0x4e0
ksys_write+0xac/0x1a0
system_call_exception+0x268/0x530
system_call_vectored_common+0x15c/0x2ec
Allocated by task 1:
kasan_save_stack+0x48/0x80
kasan_set_track+0x34/0x50
kasan_save_alloc_info+0x34/0x50
__kasan_kmalloc+0xd0/0x120
__kmalloc+0x8c/0x320
kmalloc_array.constprop.0+0x48/0x5c
drmem_init+0x2a0/0x41c
do_one_initcall+0xe0/0x5c0
kernel_init_freeable+0x4ec/0x5a0
kernel_init+0x30/0x1e0
ret_from_kernel_user_thread+0x14/0x1c
The buggy address belongs to the object at c000000364e80000
which belongs to the cache kmalloc-128k of size 131072
The buggy address is located 0 bytes to the right of
allocated 98256-byte region [c000000364e80000, c000000364e97fd0)
==================================================================
pseries-hotplug-mem: Failed to hot-remove memory at 0
Log failed lookups with a separate message and dereference the
cursor only when it points to a valid entry.
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Fixes: 51925fb3c5c9 ("powerpc/pseries: Implement memory hotplug remove in the kernel")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20231114-pseries-memhp-fixes-v1-1-fb8f2bb7c557@linux.ibm.com
Fix build errors when CURRITUCK=y and I2C is not builtin (=m or is
not set). Fixes these build errors:
powerpc-linux-ld: arch/powerpc/platforms/44x/ppc476.o: in function `avr_halt_system':
ppc476.c:(.text+0x58): undefined reference to `i2c_smbus_write_byte_data'
powerpc-linux-ld: arch/powerpc/platforms/44x/ppc476.o: in function `ppc47x_device_probe':
ppc476.c:(.init.text+0x18): undefined reference to `i2c_register_driver'
Fixes: 2a2c74b2efcb ("IBM Akebono: Add the Akebono platform")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kernel test robot <lkp@intel.com>
Closes: lore.kernel.org/r/202312010820.cmdwF5X9-lkp@intel.com
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20231201055159.8371-1-rdunlap@infradead.org
The 44x/fsp2_defconfig build fails with:
arch/powerpc/platforms/44x/idle.c:30:12: error: no previous prototype for ‘ppc44x_idle_init’ [-Werror=missing-prototypes]
30 | int __init ppc44x_idle_init(void)
| ^~~~~~~~~~~~~~~~
Fix it by making ppc44x_idle_init() static.
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20231129131919.2528517-4-mpe@ellerman.id.au
The mpc512x_defconfig build fails with:
arch/powerpc/platforms/512x/mpc5121_ads_cpld.c:142:1: error: no previous prototype for ‘mpc5121_ads_cpld_map’ [-Werror=missing-prototypes]
142 | mpc5121_ads_cpld_map(void)
| ^~~~~~~~~~~~~~~~~~~~
arch/powerpc/platforms/512x/mpc5121_ads_cpld.c:157:1: error: no previous prototype for ‘mpc5121_ads_cpld_pic_init’ [-Werror=missing-prototypes]
157 | mpc5121_ads_cpld_pic_init(void)
| ^~~~~~~~~~~~~~~~~~~~~~~~~
There are prototypes for these functions but the header they are in is
not included by mpc5121_ads_cpld.c. Include it to fix the build error.
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20231129131919.2528517-3-mpe@ellerman.id.au
The rtas_read_config() and rtas_write_config() functions in
kernel/rtas_pci.c have external linkage and two users in arch/powerpc:
the rtas_pci code itself and the pseries platform's "enhanced error
handling" (EEH) support code.
The prototypes for these functions in asm/ppc-pci.h have until now
been guarded by CONFIG_EEH since the only external caller is the
pseries EEH code. However, this presumably has always generated
warnings when built with !CONFIG_EEH and -Wmissing-prototypes:
arch/powerpc/kernel/rtas_pci.c:46:5: error: no previous prototype for
function 'rtas_read_config' [-Werror,-Wmissing-prototypes]
46 | int rtas_read_config(struct pci_dn *pdn, int where,
int size, u32 *val)
arch/powerpc/kernel/rtas_pci.c:98:5: error: no previous prototype for
function 'rtas_write_config' [-Werror,-Wmissing-prototypes]
98 | int rtas_write_config(struct pci_dn *pdn, int where,
int size, u32 val)
The introduction of commit c6345dfa6e3e ("Makefile.extrawarn: turn on
missing-prototypes globally") forces the issue.
The efika and chrp platform code have (static) functions with the same
names but different signatures. We may as well eliminate the potential
for conflicts and confusion by renaming the globally visible versions
as their prototypes get moved out of the CONFIG_EEH-guarded region;
their current names are too generic anyway. Since they operate on
objects of the type 'struct pci_dn *', give them the slightly more
verbose prefix "rtas_pci_dn_" and fix up all the call sites.
Fixes: c6345dfa6e3e ("Makefile.extrawarn: turn on missing-prototypes globally")
Reported-by: Linux Kernel Functional Testing <lkft@linaro.org>
Closes: https://lore.kernel.org/linuxppc-dev/CA+G9fYt0LLXtjSz+Hkf3Fhm-kf0ZQanrhUS+zVZGa3O+Wt2+vg@mail.gmail.com/
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20231127-rtas-pci-rw-config-v1-1-385d29ace3df@linux.ibm.com
Saves a pointer per struct dentry and actually makes the things less
clumsy. Cleaned the d_walk() and dcache_readdir() a bit by use
of hlist_for_... iterators.
A couple of new helpers - d_first_child() and d_next_sibling(),
to make the expressions less awful.
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
This is a pseries-specific function declaration that doesn't belong in
rtas.h. Move it to the pseries platform code and adjust
pseries/suspend.c accordingly.
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20231106-rtas-trivial-v1-5-61847655c51f@linux.ibm.com
These functions are only called locally and should be static like the
other corresponding functions are:
arch/powerpc/platforms/powermac/smp.c:416:13: error: no previous prototype for 'smp_psurge_take_timebase' [-Werror=missing-prototypes]
416 | void __init smp_psurge_take_timebase(void)
| ^~~~~~~~~~~~~~~~~~~~~~~~
arch/powerpc/platforms/powermac/smp.c:432:13: error: no previous prototype for 'smp_psurge_give_timebase' [-Werror=missing-prototypes]
432 | void __init smp_psurge_give_timebase(void)
| ^~~~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20231108125843.3806765-20-arnd@kernel.org
Allmodconfig builds show a warning about one function that is accidentally
marked global:
arch/powerpc/platforms/pasemi/setup.c:67:6: error: no previous prototype for 'pas_shutdown' [-Werror=missing-prototypes]
Fixes: 656fdf3ad8e0 ("powerpc/pasemi: Add Nemo board device init code.")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20231108125843.3806765-19-arnd@kernel.org
