IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
The btf__get_from_id() function was deprecated in favour of
btf__load_from_kernel_by_id(), but it is still avaiable, so use it to
provide a weak function btf__load_from_kernel_by_id() for older libbpf
when building perf with LIBBPF_DYNAMIC=1, i.e. using the system's libbpf
package.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Perf records IBS (Instruction Based Sampling) extra sample data when
'perf record --raw-samples' is used with an IBS-compatible event, on a
machine that supports IBS. IBS support is indicated in
CPUID_Fn80000001_ECX bit #10.
Up until now, users have been able to see the extra sample data solely
in raw hex format using 'perf report --dump-raw-trace'. From there,
users could decode the data either manually, or by using an external
script.
Enable the built-in 'perf report --dump-raw-trace' to do the decoding of
the extra sample data bits, so manual or external script decoding isn't
necessary.
Example usage:
$ sudo perf record -c 10000001 -a --raw-samples -e ibs_fetch/rand_en=1/,ibs_op/cnt_ctl=1/ -C 0,1 taskset -c 0,1 7za b -mmt2 | perf report --dump-raw-trace
Stdout contains IBS Fetch samples, e.g.:
ibs_fetch_ctl: 02170007ffffffff MaxCnt 1048560 Cnt 1048560 Lat 7 En 1 Val 1 Comp 1 IcMiss 0 PhyAddrValid 1 L1TlbPgSz 4KB L1TlbMiss 0 L2TlbMiss 0 RandEn 1 L2Miss 0
IbsFetchLinAd: 000056016b2ead40
IbsFetchPhysAd: 000000115cedfd40
c_ibs_ext_ctl: 0000000000000000 IbsItlbRefillLat 0
..and IBS Op samples, e.g.:
ibs_op_ctl: 0000009e009e8968 MaxCnt 10000000 En 1 Val 1 CntCtl 1=uOps CurCnt 158
IbsOpRip: 000056016b2ea73d
ibs_op_data: 00000000000b0002 CompToRetCtr 2 TagToRetCtr 11 BrnRet 0 RipInvalid 0 BrnFuse 0 Microcode 0
ibs_op_data2: 0000000000000002 CacheHitSt 0=M-state RmtNode 0 DataSrc 2=Local node cache
ibs_op_data3: 0000000000c60002 LdOp 0 StOp 1 DcL1TlbMiss 0 DcL2TlbMiss 0 DcL1TlbHit2M 0 DcL1TlbHit1G 0 DcL2TlbHit2M 0 DcMiss 0 DcMisAcc 0 DcWcMemAcc 0 DcUcMemAcc 0 DcLockedOp 0 DcMissNoMabAlloc 0 DcLinAddrValid 1 DcPhyAddrValid 1 DcL2TlbHit1G 0 L2Miss 0 SwPf 0 OpMemWidth 4 bytes OpDcMissOpenMemReqs 0 DcMissLat 0 TlbRefillLat 0
IbsDCLinAd: 00007f133c319ce0
IbsDCPhysAd: 0000000270485ce0
Committer notes:
Fixed up this:
util/amd-sample-raw.c: In function ‘evlist__amd_sample_raw’:
util/amd-sample-raw.c:125:42: error: ‘ bytes’ directive output may be truncated writing 6 bytes into a region of size between 4 and 7 [-Werror=format-truncation=]
125 | " OpMemWidth %2d bytes", 1 << (reg.op_mem_width - 1));
| ^~~~~~
In file included from /usr/include/stdio.h:866,
from util/amd-sample-raw.c:7:
/usr/include/bits/stdio2.h:71:10: note: ‘__builtin___snprintf_chk’ output between 21 and 24 bytes into a destination of size 21
71 | return __builtin___snprintf_chk (__s, __n, __USE_FORTIFY_LEVEL - 1,
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
72 | __glibc_objsize (__s), __fmt,
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
73 | __va_arg_pack ());
| ~~~~~~~~~~~~~~~~~
cc1: all warnings being treated as errors
As that %2d won't limit the number of chars to 2, just state that 2 is
the minimal width:
$ cat printf.c
#include <stdio.h>
#include <stdlib.h>
int main(int argc, char *argv[])
{
char bf[64];
int len = snprintf(bf, sizeof(bf), "%2d", atoi(argv[1]));
printf("strlen(%s): %u\n", bf, len);
return 0;
}
$ ./printf 1
strlen( 1): 2
$ ./printf 12
strlen(12): 2
$ ./printf 123
strlen(123): 3
$ ./printf 1234
strlen(1234): 4
$ ./printf 12345
strlen(12345): 5
$ ./printf 123456
strlen(123456): 6
$
And since we probably don't want that output to be truncated, just
assume the worst case, as the compiler did, and add a few more chars to
that buffer.
Also use sizeof(var) instead of sizeof(dup-of-wanted-format-string) to
avoid bugs when changing one but not the other.
I also had to change this:
-#include <asm/amd-ibs.h>
+#include "../../arch/x86/include/asm/amd-ibs.h"
To make it build on other architectures, just like intel-pt does.
Signed-off-by: Kim Phillips <kim.phillips@amd.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Joao Martins <joao.m.martins@oracle.com>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Robert Richter <robert.richter@amd.com>
Cc: Stephane Eranian <eranian@google.com>
Link: https //lore.kernel.org/r/20210817221509.88391-4-kim.phillips@amd.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To be used by IBS raw data display: It needs the recorder's cpuid in
order to determine which errata workarounds to apply to the data, and
the pmu_mappings are needed in order to figure out which PMU sample
type is IBS Fetch vs. IBS Op.
When not available from perf.data, we assume local operation, and
retrieve cpuid and pmu mappings directly from the running system.
Signed-off-by: Kim Phillips <kim.phillips@amd.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Joao Martins <joao.m.martins@oracle.com>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Robert Richter <robert.richter@amd.com>
Cc: Stephane Eranian <eranian@google.com>
Link: https //lore.kernel.org/r/20210817221509.88391-2-kim.phillips@amd.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Instead of using the file offset in the debug file.
This fixes a regression from 00a3423492 ("perf symbols: Make
dso__load_bfd_symbols() load PE files from debug cache only"), causing
incorrect symbol resolution when debug file have been stripped from
non-debug sections (in which case its .text section is empty and doesn't
have any file position).
The debug files could also be created with a different file alignment,
and have different file positions from the mmap-ed binary, or have the
section reordered.
This instead looks for the file image base, using the corresponding bfd
*ABS* symbols. As PE symbols only have 4 bytes, it also needs to keep
.text section vma high bits.
Signed-off-by: Remi Bernon <rbernon@codeweavers.com>
Fixes: 00a3423492 ("perf symbols: Make dso__load_bfd_symbols() load PE files from debug cache only")
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Nicholas Fraser <nfraser@codeweavers.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20210909192637.4139125-1-rbernon@codeweavers.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Merge more updates from Andrew Morton:
"147 patches, based on 7d2a07b769.
Subsystems affected by this patch series: mm (memory-hotplug, rmap,
ioremap, highmem, cleanups, secretmem, kfence, damon, and vmscan),
alpha, percpu, procfs, misc, core-kernel, MAINTAINERS, lib,
checkpatch, epoll, init, nilfs2, coredump, fork, pids, criu, kconfig,
selftests, ipc, and scripts"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (94 commits)
scripts: check_extable: fix typo in user error message
mm/workingset: correct kernel-doc notations
ipc: replace costly bailout check in sysvipc_find_ipc()
selftests/memfd: remove unused variable
Kconfig.debug: drop selecting non-existing HARDLOCKUP_DETECTOR_ARCH
configs: remove the obsolete CONFIG_INPUT_POLLDEV
prctl: allow to setup brk for et_dyn executables
pid: cleanup the stale comment mentioning pidmap_init().
kernel/fork.c: unexport get_{mm,task}_exe_file
coredump: fix memleak in dump_vma_snapshot()
fs/coredump.c: log if a core dump is aborted due to changed file permissions
nilfs2: use refcount_dec_and_lock() to fix potential UAF
nilfs2: fix memory leak in nilfs_sysfs_delete_snapshot_group
nilfs2: fix memory leak in nilfs_sysfs_create_snapshot_group
nilfs2: fix memory leak in nilfs_sysfs_delete_##name##_group
nilfs2: fix memory leak in nilfs_sysfs_create_##name##_group
nilfs2: fix NULL pointer in nilfs_##name##_attr_release
nilfs2: fix memory leak in nilfs_sysfs_create_device_group
trap: cleanup trap_init()
init: move usermodehelper_enable() to populate_rootfs()
...
Rename bitmap_alloc() to bitmap_zalloc() in tools to follow the bitmap API
in the kernel.
No functional changes intended.
Link: https://lkml.kernel.org/r/20210814211713.180533-14-yury.norov@gmail.com
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Yury Norov <yury.norov@gmail.com>
Suggested-by: Yury Norov <yury.norov@gmail.com>
Acked-by: Yury Norov <yury.norov@gmail.com>
Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Lobakin <alobakin@pm.me>
Cc: Alexey Klimov <aklimov@redhat.com>
Cc: Dennis Zhou <dennis@kernel.org>
Cc: Ulf Hansson <ulf.hansson@linaro.org>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
New features:
- Improvements for the flamegraph python script, including:
- Display perf.data header
- Display PIDs of user stacks
- Added option to change color scheme
- Default to blue/green color scheme to improve accessibility
- Correctly identify kernel stacks when debuginfo is available
- Improvements for 'perf bench futex':
- Add --mlockall parameter
- Add --broadcast and --pi to the 'requeue' sub benchmark
- Add support for PMU aliases.
- Introduce an ARM Coresight ETE decoder.
- Add a 'perf bench' entry for evlist open/close operations, to help quantify
improvements with multithreading 'perf record'.
- Allow reporting the [un]throttle PERF_RECORD_ meta event in 'perf script's
python scripting.
- Add a 'perf test' entry for PMU aliases.
- Add a 'perf test' entry for 'perf record/perf report/perf script' pipe mode.
Fixes:
- perf script dlfilter (API for filtering via dynamically loaded shared object
introduced in v5.14) fixes and a 'perf test' entry for it.
- Fix get_current_dir_name() compilation on Android.
- Fix issues with asciidoc and double dashes uses.
- Fix memory leaks in the BTF handling code.
- Fix leftover problems in the Documentation from the infrastructure originally
lifted from the git codebase.
- Fix *probe_vfs_getname.sh 'perf test' failures.
- Handle fd gaps in 'perf test's test__dso_data_reopen().
- Make sure to show disasembly warnings for 'perf annotate --stdio'.
- Fix output from pipe to file and vice-versa in 'perf record/report/script'.
- Correct 'perf data -h' output.
- Fix wrong comm in system-wide mode with 'perf record --delay'.
- Do not allow --for-each-cgroup without cpu in 'perf stat'
- Make 'perf test --skip' work on shell tests.
- Fix libperf's verbose printing.
Misc improvements:
- Preparatory patches for multithreading varios 'perf record' phases
(synthesizing, opening, recording, etc).
- Add sparse context/locking annotations in compiler-types.h, also to help with
the multithreading effort.
- Optimize the generation of the arch specific erno tables used in 'perf trace'.
- Optimize libperf's perf_cpu_map__max().
- Improve ARM's CoreSight warnings.
- Report collisions in AUX records.
- Improve warnings for the LLVM 'perf test' entry.
- Improve the PMU events 'perf test' codebase.
- perf test: Do not compare overheads in the zstd comp test
- Better support annotation on ARM.
- Update 'perf trace's cmd string table to decode sys_bpf() first arg.
Vendor events:
- Add JSON events and metrics for Intel's Ice Lake, Tiger Lake and Elhart Lake.
- Update JSON eventsand metrics for Intel's Cascade Lake and Sky Lake servers.
Hardware tracing:
- Improvements for the ARM hardware tracing auxtrace support.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQR2GiIUctdOfX2qHhGyPKLppCJ+JwUCYTO8OAAKCRCyPKLppCJ+
J/N0AQCTAfxKsVyh9vjIY5vwHvNkYMDM4Wvs7TmlfXbVgKLP3AEA0wYlTyar/teI
NC6jQpipxpWASFUJbLSmU8qn/XFXwQo=
=4r0w
-----END PGP SIGNATURE-----
Merge tag 'perf-tools-for-v5.15-2021-09-04' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux
Pull perf tool updates from Arnaldo Carvalho de Melo:
"New features:
- Improvements for the flamegraph python script, including:
- Display perf.data header
- Display PIDs of user stacks
- Added option to change color scheme
- Default to blue/green color scheme to improve accessibility
- Correctly identify kernel stacks when debuginfo is available
- Improvements for 'perf bench futex':
- Add --mlockall parameter
- Add --broadcast and --pi to the 'requeue' sub benchmark
- Add support for PMU aliases.
- Introduce an ARM Coresight ETE decoder.
- Add a 'perf bench' entry for evlist open/close operations, to help
quantify improvements with multithreading 'perf record'.
- Allow reporting the [un]throttle PERF_RECORD_ meta event in 'perf
script's python scripting.
- Add a 'perf test' entry for PMU aliases.
- Add a 'perf test' entry for 'perf record/perf report/perf script'
pipe mode.
Fixes:
- perf script dlfilter (API for filtering via dynamically loaded
shared object introduced in v5.14) fixes and a 'perf test' entry
for it.
- Fix get_current_dir_name() compilation on Android.
- Fix issues with asciidoc and double dashes uses.
- Fix memory leaks in the BTF handling code.
- Fix leftover problems in the Documentation from the infrastructure
originally lifted from the git codebase.
- Fix *probe_vfs_getname.sh 'perf test' failures.
- Handle fd gaps in 'perf test's test__dso_data_reopen().
- Make sure to show disasembly warnings for 'perf annotate --stdio'.
- Fix output from pipe to file and vice-versa in 'perf
record/report/script'.
- Correct 'perf data -h' output.
- Fix wrong comm in system-wide mode with 'perf record --delay'.
- Do not allow --for-each-cgroup without cpu in 'perf stat'
- Make 'perf test --skip' work on shell tests.
- Fix libperf's verbose printing.
Misc improvements:
- Preparatory patches for multithreading various 'perf record' phases
(synthesizing, opening, recording, etc).
- Add sparse context/locking annotations in compiler-types.h, also to
help with the multithreading effort.
- Optimize the generation of the arch specific erno tables used in
'perf trace'.
- Optimize libperf's perf_cpu_map__max().
- Improve ARM's CoreSight warnings.
- Report collisions in AUX records.
- Improve warnings for the LLVM 'perf test' entry.
- Improve the PMU events 'perf test' codebase.
- perf test: Do not compare overheads in the zstd comp test
- Better support annotation on ARM.
- Update 'perf trace's cmd string table to decode sys_bpf() first
arg.
Vendor events:
- Add JSON events and metrics for Intel's Ice Lake, Tiger Lake and
Elhart Lake.
- Update JSON eventsand metrics for Intel's Cascade Lake and Sky Lake
servers.
Hardware tracing:
- Improvements for the ARM hardware tracing auxtrace support"
* tag 'perf-tools-for-v5.15-2021-09-04' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: (130 commits)
perf tests: Add test for PMU aliases
perf pmu: Add PMU alias support
perf session: Report collisions in AUX records
perf script python: Allow reporting the [un]throttle PERF_RECORD_ meta event
perf build: Report failure for testing feature libopencsd
perf cs-etm: Show a warning for an unknown magic number
perf cs-etm: Print the decoder name
perf cs-etm: Create ETE decoder
perf cs-etm: Update OpenCSD decoder for ETE
perf cs-etm: Fix typo
perf cs-etm: Save TRCDEVARCH register
perf cs-etm: Refactor out ETMv4 header saving
perf cs-etm: Initialise architecture based on TRCIDR1
perf cs-etm: Refactor initialisation of decoder params.
tools build: Fix feature detect clean for out of source builds
perf evlist: Add evlist__for_each_entry_from() macro
perf evsel: Handle precise_ip fallback in evsel__open_cpu()
perf evsel: Move bpf_counter__install_pe() to success path in evsel__open_cpu()
perf evsel: Move test_attr__open() to success path in evsel__open_cpu()
perf evsel: Move ignore_missing_thread() to fallback code
...
A perf uncore PMU may have two PMU names, a real name and an alias. The
alias is exported at /sys/bus/event_source/devices/uncore_*/alias.
The perf tool should support the alias as well.
Add alias_name in the struct perf_pmu to store the alias. For the PMU
which doesn't have an alias. It's NULL.
Introduce two X86 specific functions to retrieve the real name and the
alias separately.
Only go through the sysfs to retrieve the mapping between the real name
and the alias once. The result is cached in a list, uncore_pmu_list.
Nothing changed for the other ARCHs.
With the patch, the perf tool can monitor the PMU with either the real
name or the alias.
Use the real name,
$ perf stat -e uncore_cha_2/event=1/ -x,
4044879584,,uncore_cha_2/event=1/,2528059205,100.00,,
Use the alias,
$ perf stat -e uncore_type_0_2/event=1/ -x,
3659675336,,uncore_type_0_2/event=1/,2287306455,100.00,,
Committer notes:
Rename 'struct perf_pmu_alias_name' to 'pmu_alias', the 'perf_' prefix
should be used for libperf, things inside just tools/perf/ are being
moved away from that prefix.
Also 'pmu_alias' is shorter and reflects the abstraction.
Also don't use 'pmu' as the name for variables for that type, we should
use that for the 'struct perf_pmu' variables, avoiding confusion. Use
'pmu_alias' for 'struct pmu_alias' variables.
Co-developed-by: Jin Yao <yao.jin@linux.intel.com>
Co-developed-by: Arnaldo Carvalho de Melo <acme@kernel.org>
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.garry@huawei.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Riccardo Mancini <rickyman7@gmail.com>
Link: http://lore.kernel.org/lkml/20210902065955.1299-2-yao.jin@linux.intel.com
Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Just like the other flags in the AUX records, report a summary of the
Collisions if there were any.
Signed-off-by: Suzuki Poulouse <suzuki.poulose@arm.com>
Reviewed-by: Leo Yan <leo.yan@linaro.org>
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: coresight@lists.linaro.org
Cc: linux-arm-kernel@lists.infradead.org
LPU-Reference: 20210728091219.527886-1-suzuki.poulose@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
perf_events may sometimes throttle an event due to creating too many
samples during a given timer tick.
As of now, the perf tool will not report on throttling, which means this
is a silent error.
Implement a callback for the throttle and unthrottle events within the
Python scripting engine, which can allow scripts to detect and report
when events may have been lost due to throttling.
The simplest script to report throttle events is:
def throttle(*args):
print("throttle" + repr(args))
def unthrottle(*args):
print("unthrottle" + repr(args))
Signed-off-by: Stephen Brennan <stephen.s.brennan@oracle.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20210901210815.133251-1-stephen.s.brennan@oracle.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Currently perf reports "Cannot allocate memory" which isn't very helpful
for a potentially user facing issue. If we add a new magic number in
the future, perf will be able to report unrecognised magic numbers.
Reviewed-by: Leo Yan <leo.yan@linaro.org>
Signed-off-by: James Clark <james.clark@arm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: coresight@lists.linaro.org
Cc: linux-arm-kernel@lists.infradead.org
Link: https //lore.kernel.org/r/20210806134109.1182235-10-james.clark@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Use the real name of the decoder instead of hard-coding "ETM" to avoid
confusion when the trace is ETE. This also now distinguishes between
ETMv3 and ETMv4.
Reviewed-by: Leo Yan <leo.yan@linaro.org>
Reviewed-by: Suzuki Poulouse <suzuki.poulose@arm.com>
Signed-off-by: James Clark <james.clark@arm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Will Deacon <will@kernel.org>
Cc: coresight@lists.linaro.org
Cc: linux-arm-kernel@lists.infradead.org
Link: https //lore.kernel.org/r/20210806134109.1182235-9-james.clark@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
If the magic number indicates ETE instantiate a OCSD_BUILTIN_DCD_ETE
decoder instead of OCSD_BUILTIN_DCD_ETMV4I. ETE is the new trace feature
for Armv9.
Testing performed
=================
* Old files with v0 and v1 headers for ETMv4 still open correctly
* New files with new magic number open on new versions of perf
* New files with new magic number fail to open on old versions of perf
* Decoding with the ETE decoder results in the same output as the ETMv4
decoder as long as there are no new ETE packet types
Reviewed-by: Leo Yan <leo.yan@linaro.org>
Signed-off-by: James Clark <james.clark@arm.com>
Acked-by: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Will Deacon <will@kernel.org>
Cc: coresight@lists.linaro.org
Cc: linux-arm-kernel@lists.infradead.org
Link: https //lore.kernel.org/r/20210806134109.1182235-8-james.clark@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
OpenCSD v1.1.1 has a bug fix for the installation of the ETE decoder
headers. This also means that including headers separately for each
decoder is unnecessary so remove these.
Reviewed-by: Leo Yan <leo.yan@linaro.org>
Signed-off-by: James Clark <james.clark@arm.com>
Acked-by: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Will Deacon <will@kernel.org>
Cc: coresight@lists.linaro.org
Cc: linux-arm-kernel@lists.infradead.org
Link: https //lore.kernel.org/r/20210806134109.1182235-7-james.clark@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When ETE is present save the TRCDEVARCH register and set a new magic
number. It will be used to configure the decoder in a later commit.
Old versions of perf will not be able to open files with this new magic
number, but old files will still work with newer versions of perf.
Reviewed-by: Leo Yan <leo.yan@linaro.org>
Signed-off-by: James Clark <james.clark@arm.com>
Acked-by: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Will Deacon <will@kernel.org>
Cc: coresight@lists.linaro.org
Cc: linux-arm-kernel@lists.infradead.org
Link: https //lore.kernel.org/r/20210806134109.1182235-5-james.clark@arm.com
[ Addressed some cosmetic suggestions by Suzuki Poulouse ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Currently the architecture is hard coded as ARCH_V8, but from ETMv4.4
onwards this should be ARCH_AA64.
Reviewed-by: Leo Yan <leo.yan@linaro.org>
Signed-off-by: James Clark <james.clark@arm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: coresight@lists.linaro.org
Cc: linux-arm-kernel@lists.infradead.org
Link: https //lore.kernel.org/r/20210806134109.1182235-3-james.clark@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The initialisation of the decoder params is duplicated between
creation of the packet printer and packet decoder. Put them both
into one function so that future changes only need to be made in one
place.
Reviewed-by: Leo Yan <leo.yan@linaro.org>
Signed-off-by: James Clark <james.clark@arm.com>
Acked-by: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Will Deacon <will@kernel.org>
Cc: coresight@lists.linaro.org
Cc: linux-arm-kernel@lists.infradead.org
Link: https //lore.kernel.org/r/20210806134109.1182235-2-james.clark@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This patch adds a new iteration macro for evlist that resumes iteration
from a given evsel in the evlist.
This macro will be used in the workqueue series.
Signed-off-by: Riccardo Mancini <rickyman7@gmail.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/2386505f8b598adf0dbcd04ec21804c6bcf00826.1629490974.git.rickyman7@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This is another patch in the effort to separate the fallback mechanisms
from the open itself.
In case of precise_ip fallback, the original precise_ip will be stored
in the evsel (it was stored in a local variable) and the open will be
retried. Since the precise_ip fallback will be the first in the chain of
fallbacks, there should be no functional change with this patch.
Signed-off-by: Riccardo Mancini <rickyman7@gmail.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/74208c433d2024a6c4af9c0b140b54ed6b5ea810.1629490974.git.rickyman7@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
I don't see why bpf_counter__install_pe() should get called even if
fd = -1, so I'm moving it to the success path.
This will be useful in following patches to separate the actual open and
the related operations from the fallback mechanisms.
Signed-off-by: Riccardo Mancini <rickyman7@gmail.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <songliubraving@fb.com>
Link: http://lore.kernel.org/lkml/64f8a1b0a838a6e6049cd43c1beafd432999ae57.1629490974.git.rickyman7@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
test_attr__open() ignores the fd if -1, therefore it is safe to move it to
the success path (fd >= 0).
Signed-off-by: Riccardo Mancini <rickyman7@gmail.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/b3baf11360ca96541c9631730614fd7d217496fc.1629490974.git.rickyman7@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This patch moves ignore_missing_thread outside the perf_event_open loop.
Doing so, we need to move the retry_open flag a few places higher, with
minimal impact. Furthermore, thread need not be decreased since it won't
get increased by the for loop (since we're jumping back inside), but we
need to check that the nthreads decrease didn't put thread out of range.
The goal is to have fallbacks handled in one place only, since in the
future parallel code, these would be handled separately.
Signed-off-by: Riccardo Mancini <rickyman7@gmail.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/4eca51443c786baaf6811b7cd8e73aafd97f7606.1629490974.git.rickyman7@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This is a preparatory patch for the workqueue patches with the goal to
separate from evlist__open_cpu() the actual opening (which could be
performed in parallel), from the existing fallback mechanisms, which
should be handled sequentially.
This patch separates the rlimit increase from evsel__open_cpu().
Signed-off-by: Riccardo Mancini <rickyman7@gmail.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/2f256de8ec37b9809a5cef73c2fa7bce416af5d3.1629490974.git.rickyman7@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This is a preparatory patch for the workqueue patches with the goal to
separate in evlist__open_cpu() the actual opening, which could be
performed in parallel, from the existing fallback mechanisms, which
should be handled sequentially.
This patch separates the missing feature detection in evsel__open_cpu()
into a new evsel__detect_missing_features() function.
Signed-off-by: Riccardo Mancini <rickyman7@gmail.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/cba0b7d939862473662adeedb0f9c9b69566ee9a.1629490974.git.rickyman7@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This function will prepare the evsel and disable the missing features.
It will be used in one of the following patches.
Signed-off-by: Riccardo Mancini <rickyman7@gmail.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/fa5e78bbb92c848226f044278fdcf777b3ce4583.1629490974.git.rickyman7@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This is a preparatory patch for the patches in the workqueue series with
the goal to separate in evlist__open_cpu() the actual opening, which
could be performed in parallel, from the existing fallback mechanisms,
which should be handled sequentially.
This patch separates the disabling of missing features from
evlist__open_cpu() into a new function evsel__disable_missing_features(().
Signed-off-by: Riccardo Mancini <rickyman7@gmail.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/48138bd2932646dde315505da733c2ca635ad2ee.1629490974.git.rickyman7@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This patch caches the flags used in perf_event_open() inside evsel, so
that they can be set in __evsel__prepare_open() (this will be useful in
patches in the workqueue series, when the fallback mechanisms will be
handled outside the open itself).
This also optimizes the code, by not having to recompute them everytime.
Since flags are now saved in evsel, the flags argument in
perf_event_open() is removed.
Signed-off-by: Riccardo Mancini <rickyman7@gmail.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/d9f63159098e56fa518eecf25171d72e6f74df37.1629490974.git.rickyman7@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This is a preparatory patch for the following patches with the goal to
separate in evlist__open_cpu the actual perf_event_open, which could be
performed in parallel, from the existing fallback mechanisms, which
should be handled sequentially.
This patch separates the first lines of evsel__open_cpu into a new
__evsel__prepare_open function.
Signed-off-by: Riccardo Mancini <rickyman7@gmail.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/e14118b934c338dbbf68b8677f20d0d7dbf9359a.1629490974.git.rickyman7@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
As far as I can tell, there is no good reason, apart from optimization
to have the retry_sample_id separate from fallback_missing_features.
Probably, this label was added to avoid reapplying patches for missing
features that had already been applied.
However, missing features that have been added later have not used this
optimization, always jumping to fallback_missing_features and reapplying
all missing features.
This patch removes that label, replacing it with
fallback_missing_features.
Signed-off-by: Riccardo Mancini <rickyman7@gmail.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/340af0d03408d6621fd9c742e311db18b3585b3b.1629490974.git.rickyman7@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
MMAP_CPU_MASK_BYTES uses the BITS_TO_LONGS macro, which is defined in
linux/bitops.h.
However, this header is not included directly, but gets imported
indirectly in files using the macro.
This patch adds the missing include.
Signed-off-by: Riccardo Mancini <rickyman7@gmail.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/c5b91ee432a2e28e7f16337c740b43b4d0b0e86c.1629490974.git.rickyman7@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
A CI system might want to run all tests in verbose mode so that there is
enough information to diagnose issues. This LLVM test is the only test
that uses "-v" to signify to not skip the test if the preconditions
aren't met (LLVM isn't installed). This means that running the test in
verbose mode without LLVM installed causes a test failure.
For consistency with the other tests, remove this verbose/skip check. An
alternate solution would be to make _all_ tests not skip when run in
verbose mode, but I don't think that would be intuitive.
Also change the search_program() call to search_program_and_warn().
Previously the hint about installing LLVM was only printed by the actual
test because this check was skipped in verbose mode. To maintain the old
behaviour, the precondition check must also print the full warning.
Previous output:
$ ./perf test llvm
40: LLVM search and compile :
40.1: Basic BPF llvm compile : Skip
$ ./perf test -v llvm
40: LLVM search and compile :
40.1: Basic BPF llvm compile :
--- start ---
test child forked, pid 2085835
ERROR: unable to find clang.
Hint: Try to install latest clang/llvm to support BPF. Check your $PATH
...
test child finished with -1
---- end ----
LLVM search and compile subtest 1: FAILED!
New output (non verbose mode is identical, verbose changes from fail to
skip):
$ ./perf test llvm
40: LLVM search and compile :
40.1: Basic BPF llvm compile : Skip
$ ./perf test -v llvm
40: LLVM search and compile :
40.1: Basic BPF llvm compile :
--- start ---
test child forked, pid 2087680
ERROR: unable to find clang.
Hint: Try to install latest clang/llvm to support BPF. Check your $PATH
...
No clang, skip this test
test child finished with -2
---- end ----
LLVM search and compile subtest 1: Skip
Signed-off-by: James Clark <james.clark@arm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: clang-built-linux@googlegroups.com
Link: http://lore.kernel.org/lkml/20210831145501.2135754-2-james.clark@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The same warning is duplicated in two places so refactor it into a
single function "search_program_and_warn". This will be used a third
time in a later commit.
Signed-off-by: James Clark <james.clark@arm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: clang-built-linux@googlegroups.com
Link: http://lore.kernel.org/lkml/20210831145501.2135754-1-james.clark@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When perf runs in compat mode (kernel in 64-bit mode and the perf is in
32-bit mode), the 64-bit value atomicity in the user space cannot be
assured, E.g. on some architectures, the 64-bit value accessing is split
into two instructions, one is for the low 32-bit word accessing and
another is for the high 32-bit word.
This patch introduces weak functions compat_auxtrace_mmap__read_head()
and compat_auxtrace_mmap__write_tail(), as their naming indicates, when
perf tool works in compat mode, it uses these two functions to access
the AUX head and tail. These two functions can allow the perf tool to
work properly in certain conditions, e.g. when perf tool works in
snapshot mode with only using AUX head pointer, or perf tool uses the
AUX buffer and the incremented tail is not bigger than 4GB.
When perf tool cannot handle the case when the AUX tail is bigger than
4GB, the function compat_auxtrace_mmap__write_tail() returns -1 and
tells the caller to bail out for the error.
These two functions are declared as weak attribute, this allows to
implement arch specific functions if any arch can support the 64-bit
value atomicity in compat mode.
Suggested-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: "Russell King (oracle)" <linux@armlinux.org.uk>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: coresight@lists.linaro.org
Cc: linux-arm-kernel@lists.infradead.org
Link: http://lore.kernel.org/lkml/20210829102238.19693-2-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
BTF needs to be freed with btf__free().
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: Kajol Jain <kjain@linux.ibm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20210826184833.408563-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
There is a spelling mistake in a warning message. Fix it.
Signed-off-by: Colin King <colin.king@canonical.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: kernel-janitors@vger.kernel.org
Link: http://lore.kernel.org/lkml/20210826121801.13281-1-colin.king@canonical.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acaict, perf_home_perfconfig() is supposed to cache the result of
home_perfconfig, which returns the default location of perfconfig for
the user, given the HOME environment variable.
However, the current implementation calls home_perfconfig every time
perf_home_perfconfig() is called (so no caching is actually performed),
replacing the previous pointer, thus also causing a memory leak.
This patch adds a check of whether either config or failed is set and,
in that case, directly returns config without calling home_perfconfig at
each invocation.
Fixes: f5f03e19ce ("perf config: Add perf_home_perfconfig function")
Signed-off-by: Riccardo Mancini <rickyman7@gmail.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <song@kernel.org>
Link: http://lore.kernel.org/lkml/20210820130817.740536-1-rickyman7@gmail.com
[ Removed needless double check for the 'failed' variable ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
strdup() prototype doesn't live in stdlib.h .
Add limits.h for PATH_MAX definition as well.
This fixes the build on Android.
Signed-off-by: Alexey Dobriyan (SK hynix) <adobriyan@gmail.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Link: http://lore.kernel.org/lkml/YRukaQbrgDWhiwGr@localhost.localdomain
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add missing newline at the end of file parse-sublevel-options.h.
Thus removing relevant warning reported by checkpatch.
Signed-off-by: Nghia Le <nghialm78@gmail.com>
Reviewed-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http //lore.kernel.org/lkml/20210824085947.224062-1-nghialm78@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The 'perf record' and 'perf stat' commands have supported the option
'-C/--cpus' to count or collect only on the list of CPUs provided. This
option needs to be supported for hybrid as well.
For hybrid support, it needs to check that the cpu list are available
on hybrid PMU. One example for AlderLake, cpu0-7 is 'cpu_core', cpu8-11
is 'cpu_atom'.
Before:
# perf stat -e cpu_core/cycles/ -C11 -- sleep 1
Performance counter stats for 'CPU(s) 11':
<not supported> cpu_core/cycles/
1.006179431 seconds time elapsed
The 'perf stat' command silently returned "<not supported>" without any
helpful information. It should error out pointing out that that cpu11
was not 'cpu_core'.
After:
# perf stat -e cpu_core/cycles/ -C11 -- sleep 1
WARNING: 11 isn't a 'cpu_core', please use a CPU list in the 'cpu_core' range (0-7)
failed to use cpu list 11
We also need to support the events without pmu prefix specified.
# perf stat -e cycles -C11 -- sleep 1
WARNING: 11 isn't a 'cpu_core', please use a CPU list in the 'cpu_core' range (0-7)
Performance counter stats for 'CPU(s) 11':
1,067,373 cpu_atom/cycles/
1.005544738 seconds time elapsed
The perf tool creates two cycles events automatically, cpu_core/cycles/ and
cpu_atom/cycles/. It checks that cpu11 is not 'cpu_core', then shows a warning
for cpu_core/cycles/ and only count the cpu_atom/cycles/.
If part of cpus are 'cpu_core' and part of cpus are 'cpu_atom', for example,
# perf stat -e cycles -C0,11 -- sleep 1
WARNING: use 0 in 'cpu_core' for 'cycles', skip other cpus in list.
WARNING: use 11 in 'cpu_atom' for 'cycles', skip other cpus in list.
Performance counter stats for 'CPU(s) 0,11':
1,914,704 cpu_core/cycles/
2,036,983 cpu_atom/cycles/
1.005815641 seconds time elapsed
It now automatically selects cpu0 for cpu_core/cycles/, selects cpu11 for
cpu_atom/cycles/, and output with some warnings.
Some more complex examples,
# perf stat -e cycles,instructions -C0,11 -- sleep 1
WARNING: use 0 in 'cpu_core' for 'cycles', skip other cpus in list.
WARNING: use 11 in 'cpu_atom' for 'cycles', skip other cpus in list.
WARNING: use 0 in 'cpu_core' for 'instructions', skip other cpus in list.
WARNING: use 11 in 'cpu_atom' for 'instructions', skip other cpus in list.
Performance counter stats for 'CPU(s) 0,11':
2,780,387 cpu_core/cycles/
1,583,432 cpu_atom/cycles/
3,957,277 cpu_core/instructions/
1,167,089 cpu_atom/instructions/
1.006005124 seconds time elapsed
# perf stat -e cycles,cpu_atom/instructions/ -C0,11 -- sleep 1
WARNING: use 0 in 'cpu_core' for 'cycles', skip other cpus in list.
WARNING: use 11 in 'cpu_atom' for 'cycles', skip other cpus in list.
WARNING: use 11 in 'cpu_atom' for 'cpu_atom/instructions/', skip other cpus in list.
Performance counter stats for 'CPU(s) 0,11':
3,290,301 cpu_core/cycles/
1,953,073 cpu_atom/cycles/
1,407,869 cpu_atom/instructions/
1.006260912 seconds time elapsed
Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jin Yao <yao.jin@intel.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https //lore.kernel.org/r/20210723063433.7318-4-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The user may count or collect only on a cpu list via '-C/--cpus' option.
Previously cpus for an evsel were retrieved from PMU's sysfs. But if the
target cpu list is defined, the retrieved cpus are not kept and the
target cpu list is used instead.
But for hybrid system, we can't directly use target cpu list. The cpu
list may not be available on hybrid pmu (e.g. cpu_core or cpu_atom). So
we should not set the 'has_user_cpus' flag for hybrid system.
The difficulity is that we can't call perf_pmu__has_hybrid() in evlist.c
to check hybrid system otherwise 'perf test python' would be failed
(undefined symbol for perf_pmu__has_hybrid). If we add pmu.c to
python-ext-sources, too many symbol dependencies are hard to resolve.
We use an alternative method by using a new 'hybrid' flag in target
for hybrid system checking.
Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jin Yao <yao.jin@intel.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https //lore.kernel.org/r/20210723063433.7318-3-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add a perf test to test the dlfilter C API.
A perf.data file is synthesized and then processed by perf script with a
dlfilter named dlfilter-test-api-v0.so. Also a C file is compiled to
provide a dso to match the synthesized perf.data file.
Committer testing:
[root@five ~]# perf test dlfilter
72: dlfilter C API : Ok
[root@five ~]# perf test -v dlfilter
72: dlfilter C API :
--- start ---
test child forked, pid 3387712
Checking for gcc
Command: gcc --version
gcc (GCC) 11.1.1 20210531 (Red Hat 11.1.1-3)
Copyright (C) 2021 Free Software Foundation, Inc.
This is free software; see the source for copying conditions. There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
dlfilters path: /var/home/acme/libexec/perf-core/dlfilters
Command: gcc -g -o /tmp/dlfilter-test-3387712-prog /tmp/dlfilter-test-3387712-prog.c
Creating new host machine structure
Command: /var/home/acme/bin/perf script -i /tmp/dlfilter-test-3387712-perf-data --dlfilter /var/home/acme/libexec/perf-core/dlfilters/dlfilter-test-api-v0.so --dlarg first --dlarg 1 --dlarg 4198669 --dlarg 4198662 --dlarg 0 --dlarg last
start API
filter_event_early API
filter_event API
stop API
Command: /var/home/acme/bin/perf script -i /tmp/dlfilter-test-3387712-perf-data --dlfilter /var/home/acme/libexec/perf-core/dlfilters/dlfilter-test-api-v0.so --dlarg first --dlarg 1 --dlarg 4198669 --dlarg 4198662 --dlarg 1 --dlarg last
start API
filter_event_early API
filter_event API
stop API
Command: /var/home/acme/bin/perf script -i /tmp/dlfilter-test-3387712-perf-data --dlfilter /var/home/acme/libexec/perf-core/dlfilters/dlfilter-test-api-v0.so --dlarg first --dlarg 1 --dlarg 4198669 --dlarg 4198662 --dlarg 2 --dlarg last
start API
filter_event_early API
stop API
test child finished with 0
---- end ----
dlfilter C API: Ok
[root@five ~]#
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: https //lore.kernel.org/r/20210811101036.17986-7-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Move perf_dlfilters.h in the source tree so that it will be found when
building dlfilters as part of the perf build.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: https //lore.kernel.org/r/20210811101036.17986-6-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Function pmu_add_sys_aliases() will be required for the PMU events test
for system events aliases, so make it public.
Signed-off-by: John Garry <john.garry@huawei.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: linuxarm@huawei.com
Link: https //lore.kernel.org/r/1627566986-30605-10-git-send-email-john.garry@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Calling pmu_is_uncore() for fake PMUs does not work, as it checks sysfs
for the PMU details (which won't exist).
Check .is_uncore field instead, which makes sense anyway.
Signed-off-by: John Garry <john.garry@huawei.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: linuxarm@huawei.com
Link: https //lore.kernel.org/r/1627566986-30605-7-git-send-email-john.garry@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It's useful to know that the kernel is running in 32-bit or 64-bit mode.
E.g. We can decide if perf tool is running in compat mode based on the
info.
This patch adds an item "kernel_is_64_bit" into session's environment
structure perf_env, its value is initialized based on the architecture
string.
Suggested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Li Huafei <lihuafei1@huawei.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Riccardo Mancini <rickyman7@gmail.com>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: coresight@lists.linaro.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: russell king <linux@armlinux.org.uk>
Link: http://lore.kernel.org/lkml/20210809112727.596876-2-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Since the __sync functions have been dropped, This patch removes unused
build and checking for HAVE_SYNC_COMPARE_AND_SWAP_SUPPORT in perf tool.
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Andrii Nakryiko <andriin@fb.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Daniel Díaz <daniel.diaz@linaro.org>
Cc: Frank Ch. Eigler <fche@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sedat Dilek <sedat.dilek@gmail.com>
Cc: Song Liu <songliubraving@fb.com>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: coresight@lists.linaro.org
Cc: x86@kernel.org
Link: http://lore.kernel.org/lkml/20210809111407.596077-9-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Since the function auxtrace_mmap__read_snapshot_head() is exactly same
with auxtrace_mmap__read_head(), whether the session is in snapshot mode
or not, it's unified to use function auxtrace_mmap__read_head() for
reading AUX buffer head.
And the function auxtrace_mmap__read_snapshot_head() is unused so this
patch removes it.
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Andrii Nakryiko <andriin@fb.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Daniel Díaz <daniel.diaz@linaro.org>
Cc: Frank Ch. Eigler <fche@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sedat Dilek <sedat.dilek@gmail.com>
Cc: Song Liu <songliubraving@fb.com>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: coresight@lists.linaro.org
Cc: x86@kernel.org
Link: http://lore.kernel.org/lkml/20210809111407.596077-8-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The main purpose for using __sync built-in functions is to support
compat mode for 32-bit perf with 64-bit kernel. But using these
built-in functions might cause potential issues.
__sync functions originally support Intel Itanium processoer [1] but it
cannot promise to support all 32-bit archs. Now these functions have
become the legacy functions.
Considering __sync functions cannot really fix the 64-bit value
atomicity on 32-bit archs, thus this patch drops __sync functions.
Credits to Peter for detailed analysis.
[1] https://gcc.gnu.org/onlinedocs/gcc/_005f_005fsync-Builtins.html#g_t_005f_005fsync-Builtins
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Andrii Nakryiko <andriin@fb.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Daniel Díaz <daniel.diaz@linaro.org>
Cc: Frank Ch. Eigler <fche@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sedat Dilek <sedat.dilek@gmail.com>
Cc: Song Liu <songliubraving@fb.com>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: coresight@lists.linaro.org
Cc: x86@kernel.org
Link: http://lore.kernel.org/lkml/20210809111407.596077-7-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
