IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Expand representor vport stat group to support all counters from the
vport stat group, to count all the traffic passing through the vport.
Fix current implementation where fill_stats and update_stats use
different structs.
Signed-off-by: Or Har-Toov <ohartoov@nvidia.com>
Reviewed-by: Maor Gottlieb <maorg@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Today multipath offload is only supported when the number of
nexthops is 2 which block the use of it in case of system with
2 NICs.
This patch solve it by enabling multipath offload per NIC if
2 nexthops of the route are its uplinks.
Signed-off-by: Maor Dickman <maord@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Initialize the meter object with the TC police mtu parameter.
Use the hardware range destination to compare the pkt len to the mtu setting.
Assign the range destination hit/miss ft to the police conform/exceed
attributes.
Signed-off-by: Oz Shlomo <ozsh@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
TC police action may configure the maximum packet size to be handled by
the policer, in addition to byte/packet rate.
MTU check is realized in hardware using the range destination, specifying
a hit ft, if packet len is in the range, or miss ft otherwise.
Instantiate mtu green/red flow tables with a single match-all rule.
Add the green/red actions to the hit/miss table accordingly.
Signed-off-by: Oz Shlomo <ozsh@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
TC police action may configure the maximum packet size to be handled by
the policer, in addition to byte/packet rate.
Currently the post meter table steers the packet according to the meter
aso output.
Refactor the code to allow both metering and range post actions as a
pre-step for adding police mtu offload support.
Signed-off-by: Oz Shlomo <ozsh@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Add support for matching on range.
The supported type of range is L2 frame size.
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Reviewed-by: Erez Shitrit <erezsh@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Up until now miss address in all the STEs was used to connect miss lists
and to link the last STE in the list to end anchor.
Match range STE will require special handling because its miss address is
part of the 'action'. That is, range action has hit and miss addresses.
Since the range action is always the last action, need to make sure that
its miss address isn't overwritten by the end anchor.
Adding new function mlx5dr_ste_is_miss_addr_set() to answer the question
whether the STE's miss address has already been set as part of STE
initialization. Use a callback that always returns false right now. Once
match range is added, a different callback will be used for that STE type.
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Reviewed-by: Erez Shitrit <erezsh@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
In preparation for MATCH RANGE STE support, create a function
to set the miss address of an STE.
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Reviewed-by: Erez Shitrit <erezsh@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
In many cases different actions will ask for the same definer format.
Instead of allocating new definer general object and running out of
definers, have an xarray of allocated definers and keep track of their
usage with refcounts: allocate a new definer only when there isn't
one with the same format already created, and destroy definer only
when its refcount runs down to zero.
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Reviewed-by: Alex Vesker <valex@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
As preparation for range action support, moving the handling
of final ICM address for flow table action to a separate function.
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Reviewed-by: Alex Vesker <valex@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
This patch handles the following two changes w.r.t. is_fw_table function:
1. When SW steering is asked to create/destroy FW table, we allow for
creation/destruction of only termination tables. Rename mlx5_dr_is_fw_table
both to comply with the static function naming and to reflect that we're
actually checking for FW termination table.
2. When the action 'go to flow table' is created, the destination flow
table can be any FW table, not only termination table. Adding function
to check if the dest table is FW table. This function will also be used
by the later creation of range match action, so putting it the header file.
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Reviewed-by: Alex Vesker <valex@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
SW steering is able to match only on the exact values of the packet fields,
as requested by the user: the user provides mask for the fields that are of
interest, and the exact values to be matched on when the traffic is handled.
Match Definer is a general FW object that defines which fields in the
packet will be referenced by the mask and tag of each STE. Match definer ID
is part of STE fields, and it defines how the HW needs to interpret the STE's
mask/tag values.
Till now SW steering used the definers that were managed by FW and implemented
the STE layout as described by the HW spec. Now that we're adding a new type
of STE, SW steering needs to define for the HW how it should interpret this
new STE's layout.
This is done with a programmable match definer.
The programmable definer allows to selects which fields will be included in
the definer, and their layout: it has up to 9 DW selectors 8 Byte selectors.
Each selector indicates a DW/Byte worth of fields out of the table that
is defined by HW spec by referencing the offset of the required DW/Byte.
This patch adds dr_cmd function to create and destroy MATCH_DEFINER
general object.
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Reviewed-by: Alex Vesker <valex@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Range is a new flow destination type which allows matching on
a range of values instead of matching on a specific value.
Range flow destination has the following fields:
- hit_ft: flow table to forward the traffic in case of hit
- miss_ft: flow table to forward the traffic in case of miss
- field: which packet characteristic to match on
- min: minimal value for the selected field
- max: maximal value for the selected field
Note:
- In order to match, the value in the packet should meet
the following criteria: min <= value < max
- Currently, the only supported field type is L2 packet length
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Reviewed-by: Alex Vesker <valex@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Update full structure of match definer and add an ID of
the SELECT match definer type.
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Reviewed-by: Alex Vesker <valex@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Current release - new code bugs:
- bonding: ipv6: correct address used in Neighbour Advertisement
parsing (src vs dst typo)
- fec: properly scope IRQ coalesce setup during link up to supported
chips only
Previous releases - regressions:
- Bluetooth fixes for fake CSR clones (knockoffs):
- re-add ERR_DATA_REPORTING quirk
- fix crash when device is replugged
- Bluetooth:
- silence a user-triggerable dmesg error message
- L2CAP: fix u8 overflow, oob access
- correct vendor codec definition
- fix support for Read Local Supported Codecs V2
- ti: am65-cpsw: fix RGMII configuration at SPEED_10
- mana: fix race on per-CQ variable NAPI work_done
Previous releases - always broken:
- af_unix: diag: fetch user_ns from in_skb in unix_diag_get_exact(),
avoid null-deref
- af_can: fix NULL pointer dereference in can_rcv_filter
- can: slcan: fix UAF with a freed work
- can: can327: flush TX_work on ldisc .close()
- macsec: add missing attribute validation for offload
- ipv6: avoid use-after-free in ip6_fragment()
- nft_set_pipapo: actually validate intervals in fields
after the first one
- mvneta: prevent oob access in mvneta_config_rss()
- ipv4: fix incorrect route flushing when table ID 0 is used,
or when source address is deleted
- phy: mxl-gpy: add workaround for IRQ bug on GPY215B and GPY215C
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=+mCl
-----END PGP SIGNATURE-----
Merge tag 'net-6.1-rc9' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from bluetooth, can and netfilter.
Current release - new code bugs:
- bonding: ipv6: correct address used in Neighbour Advertisement
parsing (src vs dst typo)
- fec: properly scope IRQ coalesce setup during link up to supported
chips only
Previous releases - regressions:
- Bluetooth fixes for fake CSR clones (knockoffs):
- re-add ERR_DATA_REPORTING quirk
- fix crash when device is replugged
- Bluetooth:
- silence a user-triggerable dmesg error message
- L2CAP: fix u8 overflow, oob access
- correct vendor codec definition
- fix support for Read Local Supported Codecs V2
- ti: am65-cpsw: fix RGMII configuration at SPEED_10
- mana: fix race on per-CQ variable NAPI work_done
Previous releases - always broken:
- af_unix: diag: fetch user_ns from in_skb in unix_diag_get_exact(),
avoid null-deref
- af_can: fix NULL pointer dereference in can_rcv_filter
- can: slcan: fix UAF with a freed work
- can: can327: flush TX_work on ldisc .close()
- macsec: add missing attribute validation for offload
- ipv6: avoid use-after-free in ip6_fragment()
- nft_set_pipapo: actually validate intervals in fields after the
first one
- mvneta: prevent oob access in mvneta_config_rss()
- ipv4: fix incorrect route flushing when table ID 0 is used, or when
source address is deleted
- phy: mxl-gpy: add workaround for IRQ bug on GPY215B and GPY215C"
* tag 'net-6.1-rc9' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (77 commits)
net: dsa: sja1105: avoid out of bounds access in sja1105_init_l2_policing()
s390/qeth: fix use-after-free in hsci
macsec: add missing attribute validation for offload
net: mvneta: Fix an out of bounds check
net: thunderbolt: fix memory leak in tbnet_open()
ipv6: avoid use-after-free in ip6_fragment()
net: plip: don't call kfree_skb/dev_kfree_skb() under spin_lock_irq()
net: phy: mxl-gpy: add MDINT workaround
net: dsa: mv88e6xxx: accept phy-mode = "internal" for internal PHY ports
xen/netback: don't call kfree_skb() under spin_lock_irqsave()
dpaa2-switch: Fix memory leak in dpaa2_switch_acl_entry_add() and dpaa2_switch_acl_entry_remove()
ethernet: aeroflex: fix potential skb leak in greth_init_rings()
tipc: call tipc_lxc_xmit without holding node_read_lock
can: esd_usb: Allow REC and TEC to return to zero
can: can327: flush TX_work on ldisc .close()
can: slcan: fix freed work crash
can: af_can: fix NULL pointer dereference in can_rcv_filter
net: dsa: sja1105: fix memory leak in sja1105_setup_devlink_regions()
ipv4: Fix incorrect route flushing when table ID 0 is used
ipv4: Fix incorrect route flushing when source address is deleted
...
Eric Dumazet says:
====================
mlx4: better BIG-TCP support
mlx4 uses a bounce buffer in TX whenever the tx descriptors
wrap around the right edge of the ring.
Size of this bounce buffer was hard coded and can be
increased if/when needed.
====================
Link: https://lore.kernel.org/r/20221207141237.2575012-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Test against MLX4_MAX_DESC_TXBBS only matters if the TX
bounce buffer is going to be used.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Wei Wang <weiwan@google.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Google production kernel has increased MAX_SKB_FRAGS to 45
for BIG-TCP rollout.
Unfortunately mlx4 TX bounce buffer is not big enough whenever
an skb has up to 45 page fragments.
This can happen often with TCP TX zero copy, as one frag usually
holds 4096 bytes of payload (order-0 page).
Tested:
Kernel built with MAX_SKB_FRAGS=45
ip link set dev eth0 gso_max_size 185000
netperf -t TCP_SENDFILE
I made sure that "ethtool -G eth0 tx 64" was properly working,
ring->full_size being set to 15.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Wei Wang <weiwan@google.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
MAX_DESC_SIZE is really the size of the bounce buffer used
when reaching the right side of TX ring buffer.
MAX_DESC_TXBBS get a MLX4_ prefix.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
If the ice_ptp_wait_for_offest_valid function is scheduled to run while the
driver is resetting, it will exit without completing calibration. The work
function gets scheduled by ice_ptp_port_phy_restart which will be called as
part of the reset recovery process.
It is possible for the first execution to occur before the driver has
completely cleared its resetting flags. Ensure calibration completes by
rescheduling the task until reset is fully completed.
Reported-by: Siddaraju DH <siddaraju.dh@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Gurucharan G <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
The Tx and Rx calibration and timestamp generation blocks are independent.
However, the ice driver waits until both blocks are ready before
configuring either block.
This can result in delay of configuring one block because we have not yet
received a packet in the other block.
There is no reason to wait to finish programming Tx just because we haven't
received a packet. Similarly there is no reason to wait to program Rx just
because we haven't transmitted a packet.
Instead of checking both offset status before programming either block,
refactor the ice_phy_cfg_tx_offset_e822 and ice_phy_cfg_rx_offset_e822
functions so that they perform their own offset status checks.
Additionally, make them also check the offset ready bit to determine if
the offset values have already been programmed.
Call the individual configure functions directly in
ice_ptp_wait_for_offset_valid. The functions will now correctly check
status, and program the offsets if ready. Once the offset is programmed,
the functions will exit quickly after just checking the offset ready
register.
Remove the ice_phy_calc_vernier_e822 in ice_ptp_hw.c, as well as the offset
valid check functions in ice_ptp.c entirely as they are no longer
necessary.
With this change, the Tx and Rx blocks will each be enabled as soon as
possible without waiting for the other block to complete calibration. This
can enable timestamps faster in setups which have a low rate of transmitted
or received packets. In particular, it can stop a situation where one port
never receives traffic, and thus never finishes calibration of the Tx
block, resulting in continuous faults reported by the ptp4l daemon
application.
Signed-off-by: Siddaraju DH <siddaraju.dh@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Gurucharan G <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
The ice_ptp_flush_tx_tracker function is called to clear all outstanding Tx
timestamp requests when the port is being brought down. This function
iterates over the entire list, but this is unnecessary. We only need to
check the bits which are actually set in the ready bitmap.
Replace this logic with for_each_set_bit, and follow a similar flow as in
ice_ptp_tx_tstamp_cleanup. Note that it is safe to call dev_kfree_skb_any
on a NULL pointer as it will perform a no-op so we do not need to verify
that the skb is actually NULL.
The new implementation also avoids clearing (and thus reading!) the PHY
timestamp unless the index is marked as having a valid timestamp in the
timestamp status bitmap. This ensures that we properly clear the status
registers as appropriate.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Gurucharan G <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
In the event of a PTP clock time change due to .adjtime or .settime, the
ice driver needs to update the cached copy of the PHC time and also discard
any outstanding Tx timestamps.
This is required because otherwise the wrong copy of the PHC time will be
used when extending the Tx timestamp. This could result in reporting
incorrect timestamps to the stack.
The current approach taken to handle this is to call
ice_ptp_flush_tx_tracker, which will discard any timestamps which are not
yet complete.
This is problematic for two reasons:
1) it could lead to a potential race condition where the wrong timestamp is
associated with a future packet.
This can occur with the following flow:
1. Thread A gets request to transmit a timestamped packet, and picks an
index and transmits the packet
2. Thread B calls ice_ptp_flush_tx_tracker and sees the index in use,
marking is as disarded. No timestamp read occurs because the status
bit is not set, but the index is released for re-use
3. Thread A gets a new request to transmit another timestamped packet,
picks the same (now unused) index and transmits that packet.
4. The PHY transmits the first packet and updates the timestamp slot and
generates an interrupt.
5. The ice_ptp_tx_tstamp thread executes and sees the interrupt and a
valid timestamp but associates it with the new Tx SKB and not the one
that actual timestamp for the packet as expected.
This could result in the previous timestamp being assigned to a new
packet producing incorrect timestamps and leading to incorrect behavior
in PTP applications.
This is most likely to occur when the packet rate for Tx timestamp
requests is very high.
2) on E822 hardware, we must avoid reading a timestamp index more than once
each time its status bit is set and an interrupt is generated by
hardware.
We do have some extensive checks for the unread flag to ensure that only
one of either the ice_ptp_flush_tx_tracker or ice_ptp_tx_tstamp threads
read the timestamp. However, even with this we can still have cases
where we "flush" a timestamp that was actually completed in hardware.
This can lead to cases where we don't read the timestamp index as
appropriate.
To fix both of these issues, we must avoid calling ice_ptp_flush_tx_tracker
outside of the teardown path.
Rather than using ice_ptp_flush_tx_tracker, introduce a new state bitmap,
the stale bitmap. Start this as cleared when we begin a new timestamp
request. When we're about to extend a timestamp and send it up to the
stack, first check to see if that stale bit was set. If so, drop the
timestamp without sending it to the stack.
When we need to update the cached PHC timestamp out of band, just mark all
currently outstanding timestamps as stale. This will ensure that once
hardware completes the timestamp we'll ignore it correctly and avoid
reporting bogus timestamps to userspace.
With this change, we fix potential issues caused by calling
ice_ptp_flush_tx_tracker during normal operation.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Gurucharan G <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
The ice_ptp_alloc_tx_tracker function must allocate the timestamp array and
the bitmap for tracking the currently in use indexes. A future change is
going to add yet another allocation to this function.
If these allocations fail we need to ensure that we properly cleanup and
ensure that the pointers in the ice_ptp_tx structure are NULL.
Simplify this logic by allocating to local variables first. If any
allocation fails, then free everything and exit. Only update the ice_ptp_tx
structure if all allocations succeed.
This ensures that we have no side effects on the Tx structure unless all
allocations have succeeded. Thus, no code will see an invalid pointer and
we don't need to re-assign NULL on cleanup.
This is safe because kernel "free" functions are designed to be NULL safe
and perform no action if passed a NULL pointer. Thus its safe to simply
always call kfree or bitmap_free even if one of those pointers was NULL.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Gurucharan G <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
When requesting a new timestamp, the ice_ptp_request_ts function does not
hold the Tx tracker lock while checking init and calibrating. This means
that we might issue a new timestamp request just after the Tx timestamp
tracker starts being deinitialized. This could lead to incorrect access of
the timestamp structures. Correct this by moving the init and calibrating
checks under the lock, and updating the flows which modify these fields to
use the lock.
Note that we do not need to hold the lock while checking for tx->init in
ice_ptp_tx_tstamp. This is because the teardown function will use
synchronize_irq after clearing the flag to ensure that the threaded
interrupt completes. Either a) the tx->init flag will be cleared before the
ice_ptp_tx_tstamp function starts, thus it will exit immediately, or b) the
threaded interrupt will be executing and the synchronize_irq will wait
until the threaded interrupt has completed at which point we know the init
field has definitely been set and new interrupts will not execute the Tx
timestamp thread function.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Gurucharan G <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Saeed Mahameed says:
====================
Support tc police jump conform-exceed attribute
The tc police action conform-exceed option defines how to handle
packets which exceed or conform to the configured bandwidth limit.
One of the possible conform-exceed values is jump, which skips over
a specified number of actions.
This series adds support for conform-exceed jump action.
The series adds platform support for branching actions by providing
true/false flow attributes to the branching action.
This is necessary for supporting police jump, as each branch may
execute a different action list.
The first five patches are preparation patches:
- Patches 1 and 2 add support for actions with no destinations (e.g. drop)
- Patch 3 refactor the code for subsequent function reuse
- Patch 4 defines an abstract way for identifying terminating actions
- Patch 5 updates action list validations logic considering branching actions
The following three patches introduce an interface for abstracting branching
actions:
- Patch 6 introduces an abstract api for defining branching actions
- Patch 7 generically instantiates the branching flow attributes using
the abstract API
Patch 8 adds the platform support for jump actions, by executing the following
sequence:
a. Store the jumping flow attr
b. Identify the jump target action while iterating the actions list.
c. Instantiate a new flow attribute after the jump target action.
This is the flow attribute that the branching action should jump to.
d. Set the target post action id on:
d.1. The jumping attribute, thus realizing the jump functionality.
d.2. The attribute preceding the target jump attr, if not terminating.
The next patches apply the platform's branching attributes to the police
action:
- Patch 9 is a refactor patch
- Patch 10 initializes the post meter table with the red/green flow attributes,
as were initialized by the platform
- Patch 11 enables the offload of meter actions using jump conform-exceed
value.
====================
Link: https://lore.kernel.org/all/20221203221337.29267-1-saeed@kernel.org/
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Separate the matchall police action validation from flower validation.
Isolate the action validation logic in the police action parser.
Signed-off-by: Oz Shlomo <ozsh@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Link: https://lore.kernel.org/r/20221203221337.29267-12-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Instantiate the post meter actions with the platform initialized branching
action attributes.
Signed-off-by: Oz Shlomo <ozsh@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Link: https://lore.kernel.org/r/20221203221337.29267-11-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently post meter supports only the pipe/drop conform-exceed policy.
This assumption is reflected in several variable names.
Rename the following variables as a pre-step for using the generalized
branching action platform.
Rename fwd_green_rule/drop_red_rule to green_rule/red_rule respectively.
Repurpose red_counter/green_counter to act_counter/drop_counter to allow
police conform-exceed configurations that do not drop.
Signed-off-by: Oz Shlomo <ozsh@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Link: https://lore.kernel.org/r/20221203221337.29267-10-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Identify the jump target action when iterating the action list.
Initialize the jump target attr with the jumping attribute during the
parsing phase. Initialize the jumping attr post action with the target
during the offload phase.
Signed-off-by: Oz Shlomo <ozsh@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Link: https://lore.kernel.org/r/20221203221337.29267-9-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Initialize flow attribute for drop, accept, pipe and jump branching actions.
Instantiate a flow attribute instance according to the specified branch
control action. Store the branching attributes on the branching action
flow attribute during the parsing phase. Then, during the offload phase,
allocate the relevant mod header objects to the branching actions.
Signed-off-by: Oz Shlomo <ozsh@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Link: https://lore.kernel.org/r/20221203221337.29267-8-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Extend the act tc api to set the branch control params aligning with
the police conform/exceed use case.
Signed-off-by: Oz Shlomo <ozsh@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Link: https://lore.kernel.org/r/20221203221337.29267-7-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently the entire flow action list is validate for offload limitations.
For example, flow with both forward and drop actions are declared invalid
due to hardware restrictions.
However, a multi-table hardware model changes the limitations from a flow
scope to a single flow attribute scope.
Apply offload limitations to flow attributes instead of the entire flow.
Signed-off-by: Oz Shlomo <ozsh@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Link: https://lore.kernel.org/r/20221203221337.29267-6-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Extend act api to identify actions that terminate action list.
Pre-step for terminating branching actions.
Signed-off-by: Oz Shlomo <ozsh@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Link: https://lore.kernel.org/r/20221203221337.29267-5-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
After the tc action parsing phase the flow attribute is initialized with
relevant eswitch offload objects such as tunnel, vlan, header modify and
counter attributes. The post processing is done both for fdb and post-action
attributes.
Reuse the flow attribute post parsing logic by both fdb and post-action
offloads.
Signed-off-by: Oz Shlomo <ozsh@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Link: https://lore.kernel.org/r/20221203221337.29267-4-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently create_flow_handle() assumes a null dest pointer when there
are no destinations.
This might not be the case as the caller may pass an allocated dest
array while setting the dest_num parameter to 0.
Assert null dest array for flow rules that have no destinations (e.g. drop
rule).
Signed-off-by: Oz Shlomo <ozsh@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Link: https://lore.kernel.org/r/20221203221337.29267-3-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Rules with drop action are not required to have a destination.
Currently the destination list is allocated with the maximum number of
destinations and passed to the fs_core layer along with the actual number
of destinations.
Remove redundant passing of dest pointer when count of dest is 0.
Signed-off-by: Oz Shlomo <ozsh@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Link: https://lore.kernel.org/r/20221203221337.29267-2-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=eEFh
-----END PGP SIGNATURE-----
Merge tag 'for-linus-2022120801' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid
Pull HID fixes from Jiri Kosina:
"A regression fix for handling Logitech HID++ devices and memory
corruption fixes:
- regression fix (revert) for catch-all handling of Logitech HID++
Bluetooth devices; there are devices that turn out not to work with
this, and the root cause is yet to be properly understood. So we
are dropping it for now, and it will be revisited for 6.2 or 6.3
(Benjamin Tissoires)
- memory corruption fix in HID core (ZhangPeng)
- memory corruption fix in hid-lg4ff (Anastasia Belova)
- Kconfig fix for I2C_HID (Benjamin Tissoires)
- a few device-id specific quirks that piggy-back on top of the
important fixes above"
* tag 'for-linus-2022120801' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
Revert "HID: logitech-hidpp: Enable HID++ for all the Logitech Bluetooth devices"
Revert "HID: logitech-hidpp: Remove special-casing of Bluetooth devices"
HID: usbhid: Add ALWAYS_POLL quirk for some mice
HID: core: fix shift-out-of-bounds in hid_report_raw_event
HID: uclogic: Add HID_QUIRK_HIDINPUT_FORCE quirk
HID: fix I2C_HID not selected when I2C_HID_OF_ELAN is
HID: hid-lg4ff: Add check for empty lbuf
HID: ite: Enable QUIRK_TOUCHPAD_ON_OFF_REPORT on Acer Aspire Switch V 10
HID: uclogic: Fix frame templates for big endian architectures
One last build fix came in, addressing a link failure when
building without CONFIG_OUTER_CACHE
-----BEGIN PGP SIGNATURE-----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=5lcR
-----END PGP SIGNATURE-----
Merge tag 'soc-fixes-6.1-5' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fix from Arnd Bergmann:
"One last build fix came in, addressing a link failure when building
without CONFIG_OUTER_CACHE"
* tag 'soc-fixes-6.1-5' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
ARM: at91: fix build for SAMA5D3 w/o L2 cache
This reverts commit 532223c8ac57605a10e46dc0ab23dcf01c9acb43.
As reported in [0], hid-logitech-hidpp now binds on all bluetooth mice,
but there are corner cases where hid-logitech-hidpp just gives up on
the mouse. This leads the end user with a dead mouse.
Given that we are at -rc8, we are definitively too late to find a proper
fix. We already identified 2 issues less than 24 hours after the bug
report. One in that ->match() was never designed to be used anywhere else
than in hid-generic, and the other that hid-logitech-hidpp has corner
cases where it gives up on devices it is not supposed to.
So we have no choice but postpone this patch to the next kernel release.
[0] https://lore.kernel.org/linux-input/CAJZ5v0g-_o4AqMgNwihCb0jrwrcJZfRrX=jv8aH54WNKO7QB8A@mail.gmail.com/
Reported-by: Rafael J . Wysocki <rjw@rjwysocki.net>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
This reverts commit 8544c812e43ab7bdf40458411b83987b8cba924d.
We need to revert commit 532223c8ac57 ("HID: logitech-hidpp: Enable HID++
for all the Logitech Bluetooth devices") because that commit might make
hid-logitech-hidpp bind on mice that are not well enough supported by
hid-logitech-hidpp, and the end result is that the probe of those mice
is now returning -ENODEV, leaving the end user with a dead mouse.
Given that commit 8544c812e43a ("HID: logitech-hidpp: Remove special-casing
of Bluetooth devices") is a direct dependency of 532223c8ac57, revert it
too.
Note that this also adapt according to commit 908d325e1665 ("HID:
logitech-hidpp: Detect hi-res scrolling support") to re-add support of
the devices that were removed from that commit too.
I have locally an MX Master and I tested this device with that revert,
ensuring we still have high-res scrolling.
Reported-by: Rafael J . Wysocki <rjw@rjwysocki.net>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Since commit 1229b33973c7 ("ice: Add low latency Tx timestamp read") the
ice driver has used a threaded IRQ for handling Tx timestamps. This change
did not add a call to synchronize_irq during ice_ptp_release_tx_tracker.
Thus it is possible that an interrupt could occur just as the tracker is
being removed. This could lead to a use-after-free of the Tx tracker
structure data.
Fix this by calling sychronize_irq in ice_ptp_release_tx_tracker after
we've cleared the init flag. In addition, make sure that we re-check the
init flag at the end of ice_ptp_tx_tstamp before we exit ensuring that we
will stop polling for new timestamps once the tracker de-initialization has
begun.
Refactor the ts_handled variable into "more_timestamps" so that we can
simply directly assign this boolean instead of relying on an initialized
value of true. This makes the new combined check easier to read.
With this change, the ice_ptp_release_tx_tracker function will now wait for
the threaded interrupt to complete if it was executing while the init flag
was cleared.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Gurucharan G <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
The PHY for E822 based hardware has a register which indicates which
timestamps are valid in the PHY timestamp memory block. Each bit in the
register indicates whether the associated index in the timestamp memory is
valid.
Hardware sets this bit when the timestamp is captured, and clears the bit
when the timestamp is read. Use of this register is important as reading
timestamp registers can impact the way that hardware generates timestamp
interrupts.
This occurs because the PHY has an internal value which is incremented
when hardware captures a timestamp and decremented when software reads a
timestamp. Reading timestamps which are not marked as valid still decrement
the internal value and can result in the Tx timestamp interrupt not
triggering in the future.
To prevent this, use the timestamp memory value to determine which
timestamps are ready to be read. The ice_get_phy_tx_tstamp_ready function
reads this value. For E810 devices, this just always returns with all bits
set.
Skip any timestamp which is not set in this bitmap, avoiding reading extra
timestamps on E822 devices.
The stale check against a cached timestamp value is no longer necessary for
PHYs which support the timestamp ready bitmap properly. E810 devices still
need this. Introduce a new verify_cached flag to the ice_ptp_tx structure.
Use this to determine if we need to perform the verification against the
cached timestamp value. Set this to 1 for the E810 Tx tracker init
function. Notice that many of the fields in ice_ptp_tx are simple 1 bit
flags. Save some structure space by using bitfields of length 1 for these
values.
Modify the ICE_PTP_TS_VALID check to simply drop the timestamp immediately
so that in an event of getting such an invalid timestamp the driver does
not attempt to re-read the timestamp again in a future poll of the
register.
With these changes, the driver now reads each timestamp register exactly
once, and does not attempt any re-reads. This ensures the interrupt
tracking logic in the PHY will not get stuck.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Gurucharan G <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Currently the driver uses the PTP kthread to process handling and
discarding of stale Tx timestamp requests. The function
ice_ptp_tx_tstamp_cleanup is used for this.
A separate thread creates complications for the driver as we now have both
the main Tx timestamp processing IRQ checking timestamps as well as the
kthread.
Rather than using the kthread to handle this, simply check for stale
timestamps within the ice_ptp_tx_tstamp function. This function must
already process the timestamps anyways.
If a Tx timestamp has been waiting for 2 seconds we simply clear the bit
and discard the SKB. This avoids the complication of having separate
threads polling, reducing overall CPU work.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Gurucharan G <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
The ice_ptp_link_change function is currently only called for E822 based
hardware. Future changes are going to extend this function to perform
additional tasks on link change.
Always call this function, moving the E810 check from the callers down to
just before we call the E822-specific function required to restart the PHY.
This function also returns an error value, but none of the callers actually
check it. In general, the errors it produces are more likely systemic
problems such as invalid or corrupt port numbers. No caller checks these,
and so no warning is logged.
Re-order the flag checks so that ICE_FLAG_PTP is checked first. Drop the
unnecessary check for ICE_FLAG_PTP_SUPPORTED, as ICE_FLAG_PTP will not be
set except when ICE_FLAG_PTP_SUPPORTED is set.
Convert the port checks to WARN_ON_ONCE, in order to generate a kernel
stack trace when they are hit.
Convert the function to void since no caller actually checks these return
values.
Co-developed-by: Dave Ertman <david.m.ertman@intel.com>
Signed-off-by: Dave Ertman <david.m.ertman@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Gurucharan G <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
The ice_ptp_link_change function has a comment which mentions "link
err" when referring to the current link status. We are storing the status
of whether link is up or down, which is not an error.
It is appears that this use of err accidentally got included due to an
overzealous search and replace when removing the ice_status enum and local
status variable.
Fix the wording to use the correct term.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Gurucharan G <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
In E822 products, the owner PF should reset memory for all quads, not
only for the one where assigned lport is.
Signed-off-by: Karol Kolacinski <karol.kolacinski@intel.com>
Tested-by: Gurucharan G <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
The E822 devices support an extended "vernier" calibration which enables
higher precision timestamps by accounting for delays in the PHY, and
compensating for them. These delays are measured by hardware as part of its
vernier calibration logic.
The driver currently starts the PHY in "bypass" mode which skips
the compensation. Then it later attempts to switch from bypass to vernier.
This unfortunately does not work as expected. Instead of properly
compensating for the delays, the hardware continues operating in bypass
without the improved precision expected.
Because we cannot dynamically switch between bypass and vernier mode,
refactor the driver to always operate in vernier mode. This has a slight
downside: Tx timestamp and Rx timestamp requests that occur as the very
first packet set after link up will not complete properly and may be
reported to applications as missing timestamps.
This occurs frequently in test environments where traffic is light or
targeted specifically at testing PTP. However, in practice most
environments will have transmitted or received some data over the network
before such initial requests are made.
Signed-off-by: Milena Olech <milena.olech@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Gurucharan G <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Some supported devices have per-port timestamp memory blocks while
others have shared ones within quads. Rename the struct ice_ptp_tx
fields to reflect the block entities it works with
Signed-off-by: Sergey Temerkhanov <sergey.temerkhanov@intel.com>
Tested-by: Gurucharan G <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
