IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Given the way the driver currently works, these values are always known
at compile time.
Signed-off-by: Benjamin Poirier <bpoirier@suse.com>
Link: https://lore.kernel.org/r/20190927101210.23856-13-bpoirier@suse.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Using the unmap addr elsewhere than unmap calls is a misuse of the dma api.
In prevision of this fix, qlge kept two copies of the dma address around ;)
Fixes: c4e84bde1d59 ("qlge: New Qlogic 10Gb Ethernet Driver.")
Fixes: 7c734359d350 ("qlge: Size RX buffers based on MTU.")
Fixes: 2c9a266afefe ("qlge: Fix receive packets drop.")
Signed-off-by: Benjamin Poirier <bpoirier@suse.com>
Link: https://lore.kernel.org/r/20190927101210.23856-10-bpoirier@suse.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The qlge driver (and device) uses two kinds of buffers for reception,
so-called "small buffers" and "large buffers". The two are arranged in
rings, the sbq and lbq. These two share similar data structures and code.
Factor out data structures into a common struct qlge_bq, make required
adjustments to code and dedup the most obvious cases of copy/paste.
This patch should not introduce any functional change other than to some of
the printk format strings.
Signed-off-by: Benjamin Poirier <bpoirier@suse.com>
Link: https://lore.kernel.org/r/20190927101210.23856-9-bpoirier@suse.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This is unneeded for two reasons:
1) the cpu does not write data for the device in the mapping
2) calls like ..._sync_..._for_device(..., ..._FROMDEVICE) are
nonsensical, see commit 3f0fb4e85b38 ("Documentation/DMA-API-HOWTO.txt:
fix misleading example")
Signed-off-by: Benjamin Poirier <bpoirier@suse.com>
Link: https://lore.kernel.org/r/20190927101210.23856-8-bpoirier@suse.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tx completion rings have sbq_buf_size = 0 but there's no case where the
code actually tests on that value. We can remove sbq_buf_size and use a
constant instead.
Signed-off-by: Benjamin Poirier <bpoirier@suse.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/20190927101210.23856-7-bpoirier@suse.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The size of the mapping is known statically in all cases, there's no need
to save it at runtime. Remove this member.
Signed-off-by: Benjamin Poirier <bpoirier@suse.com>
Acked-by: Manish Chopra <manishc@marvell.com>
Link: https://lore.kernel.org/r/20190927101210.23856-6-bpoirier@suse.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
lbq_buf_size is duplicated to every rx_ring structure whereas lbq_buf_order
is present once in the ql_adapter structure. All rings use the same buf
size, keep only one copy of it. Also factor out the calculation of
lbq_buf_size instead of having two copies.
Signed-off-by: Benjamin Poirier <bpoirier@suse.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/20190927101210.23856-5-bpoirier@suse.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
As already done in ql_get_curr_lchunk(), this member can be replaced by a
simple test.
Signed-off-by: Benjamin Poirier <bpoirier@suse.com>
Acked-by: Manish Chopra <manishc@marvell.com>
Link: https://lore.kernel.org/r/20190927101210.23856-4-bpoirier@suse.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
qlge uses an irq enable/disable refcounting scheme that is:
* poorly implemented
Uses a spin_lock to protect accesses to the irq_cnt atomic
variable.
* buggy
Breaks when there is not a 1:1 sequence of irq - napi_poll, such as
when using SO_BUSY_POLL.
* unnecessary
The purpose or irq_cnt is to reduce irq control writes when
multiple work items result from one irq: the irq is re-enabled
after all work is done.
Analysis of the irq handler shows that there is only one case where
there might be two workers scheduled at once, and those have
separate irq masking bits.
Therefore, remove irq_cnt.
Additionally, we get a performance improvement:
perf stat -e cycles -a -r5 super_netperf 100 -H 192.168.33.1 -t TCP_RR
Before:
628560
628056
622103
622744
627202
[...]
268,803,947,669 cycles ( +- 0.09% )
After:
636300
634106
634984
638555
634188
[...]
259,237,291,449 cycles ( +- 0.19% )
Signed-off-by: Benjamin Poirier <bpoirier@suse.com>
Link: https://lore.kernel.org/r/20190927101210.23856-3-bpoirier@suse.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tracing the driver operation reveals that the INTR_EN_EN bit (per-queue
interrupt control) does not immediately prevent rx completion interrupts
when the device is operating in INTx mode. This leads to interrupts being
raised while napi is scheduled/running. Those interrupts are ignored by
qlge_isr() and falsely reported as IRQ_NONE thanks to the irq_cnt scheme.
This in turn can cause frames to loiter in the receive queue until a later
frame leads to another rx interrupt that will schedule napi.
Use the INTR_EN_EI bit (master interrupt control) instead.
Signed-off-by: Benjamin Poirier <bpoirier@suse.com>
Link: https://lore.kernel.org/r/20190927101210.23856-2-bpoirier@suse.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
coccicheck reported warning for unnecessary variable used.
This patch fixes the same by removing the variable and
returning value directly.
Signed-off-by: Aliasgar Surti <aliasgar.surti500@gmail.com>
Link: https://lore.kernel.org/r/1568812596-25926-1-git-send-email-aliasgar.surti500@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Now if CONFIG_ETHERNET is not set, QLGE driver
building fails:
drivers/staging/qlge/qlge_main.o: In function `qlge_remove':
drivers/staging/qlge/qlge_main.c:4831: undefined reference to `unregister_netdev'
Reported-by: Hulk Robot <hulkci@huawei.com>
Fixes: 955315b0dc8c ("qlge: Move drivers/net/ethernet/qlogic/qlge/ to drivers/staging/qlge/")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The hardware has been declared EOL by the vendor more than 5 years ago.
What's more relevant to the Linux kernel is that the quality of this driver
is not on par with many other mainline drivers.
Cc: Manish Chopra <manishc@marvell.com>
Message-id: <20190617074858.32467-1-bpoirier@suse.com>
Signed-off-by: Benjamin Poirier <bpoirier@suse.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
