IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
The PERF_RECORD_ATTR is used for a pipe mode to describe an event with
attribute and IDs. The ID table comes after the attr and it calculate
size of the table using the total record size and the attr size.
n_ids = (total_record_size - end_of_the_attr_field) / sizeof(u64)
This is fine for most use cases, but sometimes it saves the pipe output
in a file and then process it later. And it becomes a problem if there
is a change in attr size between the record and report.
$ perf record -o- > perf-pipe.data # old version
$ perf report -i- < perf-pipe.data # new version
For example, if the attr size is 128 and it has 4 IDs, then it would
save them in 168 byte like below:
8 byte: perf event header { .type = PERF_RECORD_ATTR, .size = 168 },
128 byte: perf event attr { .size = 128, ... },
32 byte: event IDs [] = { 1234, 1235, 1236, 1237 },
But when report later, it thinks the attr size is 136 then it only read
the last 3 entries as ID.
8 byte: perf event header { .type = PERF_RECORD_ATTR, .size = 168 },
136 byte: perf event attr { .size = 136, ... },
24 byte: event IDs [] = { 1235, 1236, 1237 }, // 1234 is missing
So it should use the recorded version of the attr. The attr has the
size field already then it should honor the size when reading data.
Fixes: 2c46dbb517 ("perf: Convert perf header attrs into attr events")
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Tom Zanussi <zanussi@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230825152552.112913-1-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
intel-pt tests were failing:
-- Test virtual LBR ---
Linux
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.126 MB /tmp/perf-test-intel-pt-sh.FW57CXnCqQ/test-perf.data ]
Failed with virtual lbr
...
```
The root cause is an out-of-bounds read in header (where maxbrstack.py
is from test_intel_pt.sh):
```
$ perf --no-pager script --itrace=L -s maxbrstack.py
=================================================================
==3907930==ERROR: AddressSanitizer: heap-buffer-overflow on address 0x6020000095a8 at pc 0x563c26c840bb bp 0x7fff43582710 sp 0x7fff43582708
READ of size 4 at 0x6020000095a8 thread T0
#0 0x563c26c840ba in process_group_desc util/header.c:2847
#1 0x563c26c8bc78 in perf_file_section__process util/header.c:4037
#2 0x563c26c8aa9b in perf_header__process_sections util/header.c:3813
#3 0x563c26c8d028 in perf_session__read_header util/header.c:4286
#4 0x563c26cbab29 in perf_session__open util/session.c:113
#5 0x563c26cbb3d0 in __perf_session__new util/session.c:221
#6 0x563c26aacb14 in perf_session__new util/session.h:73
#7 0x563c26acf7f1 in cmd_script tools/perf/builtin-script.c:4212
#8 0x563c26bb58ff in run_builtin tools/perf/perf.c:323
#9 0x563c26bb5e70 in handle_internal_command tools/perf/perf.c:377
#10 0x563c26bb6238 in run_argv tools/perf/perf.c:421
#11 0x563c26bb67a0 in main tools/perf/perf.c:537
#12 0x7f34bde46189 in __libc_start_call_main ../sysdeps/nptl/libc_start_call_main.h:58
#13 0x7f34bde46244 in __libc_start_main_impl ../csu/libc-start.c:381
#14 0x563c26a33390 in _start (/tmp/perf/perf+0x1eb390)
0x6020000095a8 is located 8 bytes to the right of 16-byte region [0x602000009590,0x6020000095a0)
allocated by thread T0 here:
#0 0x7f34beeb83b7 in __interceptor_calloc ../../../../src/libsanitizer/asan/asan_malloc_linux.cpp:77
#1 0x563c26c83df8 in process_group_desc util/header.c:2824
#2 0x563c26c8bc78 in perf_file_section__process util/header.c:4037
#3 0x563c26c8aa9b in perf_header__process_sections util/header.c:3813
#4 0x563c26c8d028 in perf_session__read_header util/header.c:4286
#5 0x563c26cbab29 in perf_session__open util/session.c:113
#6 0x563c26cbb3d0 in __perf_session__new util/session.c:221
#7 0x563c26aacb14 in perf_session__new util/session.h:73
#8 0x563c26acf7f1 in cmd_script tools/perf/builtin-script.c:4212
#9 0x563c26bb58ff in run_builtin tools/perf/perf.c:323
#10 0x563c26bb5e70 in handle_internal_command tools/perf/perf.c:377
#11 0x563c26bb6238 in run_argv tools/perf/perf.c:421
#12 0x563c26bb67a0 in main tools/perf/perf.c:537
#13 0x7f34bde46189 in __libc_start_call_main ../sysdeps/nptl/libc_start_call_main.h:58
```
Avoid the out-of-bounds read checking for the leader. Leave the 'nr'
check intact as nr will be 0 or the counting down and evsel be a group
member.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ali Saidi <alisaidi@amazon.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Brian Robbins <brianrob@linux.microsoft.com>
Cc: Changbin Du <changbin.du@huawei.com>
Cc: Dmitrii Dolgov <9erthalion6@gmail.com>
Cc: Fangrui Song <maskray@google.com>
Cc: German Gomez <german.gomez@arm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Ivan Babrou <ivan@cloudflare.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jing Zhang <renyu.zj@linux.alibaba.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: K Prateek Nayak <kprateek.nayak@amd.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Miguel Ojeda <ojeda@kernel.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Steinar H. Gunderson <sesse@google.com>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: Wenyu Liu <liuwenyu7@huawei.com>
Cc: Will Deacon <will@kernel.org>
Cc: Yang Jihong <yangjihong1@huawei.com>
Cc: Ye Xingchen <ye.xingchen@zte.com.cn>
Cc: Yuan Can <yuancan@huawei.com>
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lore.kernel.org/lkml/20230608232823.4027869-24-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Remove the LIBTRACEEVENT_DYNAMIC and LIBTRACEFS_DYNAMIC make command
line variables.
If libtraceevent isn't installed or NO_LIBTRACEEVENT=1 is passed to the
build, don't compile in libtraceevent and libtracefs support.
This also disables CONFIG_TRACE that controls "perf trace".
CONFIG_LIBTRACEEVENT is used to control enablement in Build/Makefiles,
HAVE_LIBTRACEEVENT is used in C code.
Without HAVE_LIBTRACEEVENT tracepoints are disabled and as such the
commands kmem, kwork, lock, sched and timechart are removed. The
majority of commands continue to work including "perf test".
Committer notes:
Fixed up a tools/perf/util/Build reject and added:
#include <traceevent/event-parse.h>
to tools/perf/util/scripting-engines/trace-event-perl.c.
Committer testing:
$ rpm -qi libtraceevent-devel
Name : libtraceevent-devel
Version : 1.5.3
Release : 2.fc36
Architecture: x86_64
Install Date: Mon 25 Jul 2022 03:20:19 PM -03
Group : Unspecified
Size : 27728
License : LGPLv2+ and GPLv2+
Signature : RSA/SHA256, Fri 15 Apr 2022 02:11:58 PM -03, Key ID 999f7cbf38ab71f4
Source RPM : libtraceevent-1.5.3-2.fc36.src.rpm
Build Date : Fri 15 Apr 2022 10:57:01 AM -03
Build Host : buildvm-x86-05.iad2.fedoraproject.org
Packager : Fedora Project
Vendor : Fedora Project
URL : https://git.kernel.org/pub/scm/libs/libtrace/libtraceevent.git/
Bug URL : https://bugz.fedoraproject.org/libtraceevent
Summary : Development headers of libtraceevent
Description :
Development headers of libtraceevent-libs
$
Default build:
$ ldd ~/bin/perf | grep tracee
libtraceevent.so.1 => /lib64/libtraceevent.so.1 (0x00007f1dcaf8f000)
$
# perf trace -e sched:* --max-events 10
0.000 migration/0/17 sched:sched_migrate_task(comm: "", pid: 1603763 (perf), prio: 120, dest_cpu: 1)
0.005 migration/0/17 sched:sched_wake_idle_without_ipi(cpu: 1)
0.011 migration/0/17 sched:sched_switch(prev_comm: "", prev_pid: 17 (migration/0), prev_state: 1, next_comm: "", next_prio: 120)
1.173 :0/0 sched:sched_wakeup(comm: "", pid: 3138 (gnome-terminal-), prio: 120)
1.180 :0/0 sched:sched_switch(prev_comm: "", prev_prio: 120, next_comm: "", next_pid: 3138 (gnome-terminal-), next_prio: 120)
0.156 migration/1/21 sched:sched_migrate_task(comm: "", pid: 1603763 (perf), prio: 120, orig_cpu: 1, dest_cpu: 2)
0.160 migration/1/21 sched:sched_wake_idle_without_ipi(cpu: 2)
0.166 migration/1/21 sched:sched_switch(prev_comm: "", prev_pid: 21 (migration/1), prev_state: 1, next_comm: "", next_prio: 120)
1.183 :0/0 sched:sched_wakeup(comm: "", pid: 1602985 (kworker/u16:0-f), prio: 120, target_cpu: 1)
1.186 :0/0 sched:sched_switch(prev_comm: "", prev_prio: 120, next_comm: "", next_pid: 1602985 (kworker/u16:0-f), next_prio: 120)
#
Had to tweak tools/perf/util/setup.py to make sure the python binding
shared object links with libtraceevent if -DHAVE_LIBTRACEEVENT is
present in CFLAGS.
Building with NO_LIBTRACEEVENT=1 uncovered some more build failures:
- Make building of data-convert-bt.c to CONFIG_LIBTRACEEVENT=y
- perf-$(CONFIG_LIBTRACEEVENT) += scripts/
- bpf_kwork.o needs also to be dependent on CONFIG_LIBTRACEEVENT=y
- The python binding needed some fixups and util/trace-event.c can't be
built and linked with the python binding shared object, so remove it
in tools/perf/util/setup.py and exclude it from the list of
dependencies in the python/perf.so Makefile.perf target.
Building without libtraceevent-devel installed uncovered more build
failures:
- The python binding tools/perf/util/python.c was assuming that
traceevent/parse-events.h was always available, which was the case
when we defaulted to using the in-kernel tools/lib/traceevent/ files,
now we need to enclose it under ifdef HAVE_LIBTRACEEVENT, just like
the other parts of it that deal with tracepoints.
- We have to ifdef the rules in the Build files with
CONFIG_LIBTRACEEVENT=y to build builtin-trace.c and
tools/perf/trace/beauty/ as we only ifdef setting CONFIG_TRACE=y when
setting NO_LIBTRACEEVENT=1 in the make command line, not when we don't
detect libtraceevent-devel installed in the system. Simplification here
to avoid these two ways of disabling builtin-trace.c and not having
CONFIG_TRACE=y when libtraceevent-devel isn't installed is the clean
way.
From Athira:
<quote>
tools/perf/arch/powerpc/util/Build
-perf-y += kvm-stat.o
+perf-$(CONFIG_LIBTRACEEVENT) += kvm-stat.o
</quote>
Then, ditto for arm64 and s390, detected by container cross build tests.
- s/390 uses test__checkevent_tracepoint() that is now only available if
HAVE_LIBTRACEEVENT is defined, enclose the callsite with ifder HAVE_LIBTRACEEVENT.
Also from Athira:
<quote>
With this change, I could successfully compile in these environment:
- Without libtraceevent-devel installed
- With libtraceevent-devel installed
- With “make NO_LIBTRACEEVENT=1”
</quote>
Then, finally rename CONFIG_TRACEEVENT to CONFIG_LIBTRACEEVENT for
consistency with other libraries detected in tools/perf/.
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: bpf@vger.kernel.org
Link: http://lore.kernel.org/lkml/20221205225940.3079667-3-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To update the perf/core codebase.
Fix conflict by moving arch__post_evsel_config(evsel, attr) to the end
of evsel__config(), after what was added in:
49c692b7df ("perf offcpu: Accept allowed sample types only")
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When the -D option is used, the details of thread-map, cpu-map and
event-update events are not currently dumped. Add prints so that they are.
Example:
# perf record --kcore sleep 0.1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.021 MB perf.data (7 samples) ]
# perf script -D | grep 'THREAD\|CPU'
0 0x4950 [0x28]: PERF_RECORD_THREAD_MAP nr: 1 thread: 35116
0 0x4978 [0x20]: PERF_RECORD_CPU_MAP: 0-7
# perf script -D | grep -A4 'UPDATE'
0 0x4920 [0x30]: PERF_RECORD_EVENT_UPDATE
... id: 147
... 0-7
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Ian Rogers <irogers@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20220610113316.6682-6-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Perf numa bench test fails with error:
Testcase:
./perf bench numa mem -p 2 -t 1 -P 1024 -C 0,8 -M 1,0 -s 20 -zZq --thp 1 --no-data_rand_walk
Failure snippet:
<<>>
Running 'numa/mem' benchmark:
# Running main, "perf bench numa numa-mem -p 2 -t 1 -P 1024 -C 0,8 -M 1,0 -s 20 -zZq --thp 1 --no-data_rand_walk"
perf: bench/numa.c:333: bind_to_cpumask: Assertion `!(ret)' failed.
<<>>
The Testcases uses CPU's 0 and 8. In function "parse_setup_cpu_list",
There is check to see if cpu number is greater than max cpu's possible
in the system ie via "if (bind_cpu_0 >= g->p.nr_cpus || bind_cpu_1 >=
g->p.nr_cpus) {".
But it could happen that system has say 48 CPU's, but only number of
online CPU's is 0-7. Other CPU's are offlined. Since "g->p.nr_cpus" is
48, so function will go ahead and set bit for CPU 8 also in cpumask (
td->bind_cpumask).
bind_to_cpumask function is called to set affinity using
sched_setaffinity and the cpumask. Since the CPU8 is not present, set
affinity will fail here with EINVAL.
Fix this issue by adding a check to make sure that, CPU's provided in
the input argument values are online before proceeding further and skip
the test. For this, include new helper function "is_cpu_online" in
"tools/perf/util/header.c".
Since "BIT(x)" definition will get included from header.h, remove
that from bench/numa.c
Reported-by: Disha Goel <disgoel@linux.vnet.ibm.com>
Signed-off-by: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Tested-by: Disha Goel <disgoel@linux.vnet.ibm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nageswara R Sastry <rnsastry@linux.ibm.com>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: linuxppc-dev@lists.ozlabs.org
Link: https://lore.kernel.org/r/20220412164059.42654-2-atrajeev@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Merge more updates from Andrew Morton:
"147 patches, based on 7d2a07b769.
Subsystems affected by this patch series: mm (memory-hotplug, rmap,
ioremap, highmem, cleanups, secretmem, kfence, damon, and vmscan),
alpha, percpu, procfs, misc, core-kernel, MAINTAINERS, lib,
checkpatch, epoll, init, nilfs2, coredump, fork, pids, criu, kconfig,
selftests, ipc, and scripts"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (94 commits)
scripts: check_extable: fix typo in user error message
mm/workingset: correct kernel-doc notations
ipc: replace costly bailout check in sysvipc_find_ipc()
selftests/memfd: remove unused variable
Kconfig.debug: drop selecting non-existing HARDLOCKUP_DETECTOR_ARCH
configs: remove the obsolete CONFIG_INPUT_POLLDEV
prctl: allow to setup brk for et_dyn executables
pid: cleanup the stale comment mentioning pidmap_init().
kernel/fork.c: unexport get_{mm,task}_exe_file
coredump: fix memleak in dump_vma_snapshot()
fs/coredump.c: log if a core dump is aborted due to changed file permissions
nilfs2: use refcount_dec_and_lock() to fix potential UAF
nilfs2: fix memory leak in nilfs_sysfs_delete_snapshot_group
nilfs2: fix memory leak in nilfs_sysfs_create_snapshot_group
nilfs2: fix memory leak in nilfs_sysfs_delete_##name##_group
nilfs2: fix memory leak in nilfs_sysfs_create_##name##_group
nilfs2: fix NULL pointer in nilfs_##name##_attr_release
nilfs2: fix memory leak in nilfs_sysfs_create_device_group
trap: cleanup trap_init()
init: move usermodehelper_enable() to populate_rootfs()
...
Move evsel::leader to perf_evsel::leader, so we can move the group
interface to libperf.
Also add several evsel helpers to ease up the transition:
struct evsel *evsel__leader(struct evsel *evsel);
- get leader evsel
bool evsel__has_leader(struct evsel *evsel, struct evsel *leader);
- true if evsel has leader as leader
bool evsel__is_leader(struct evsel *evsel);
- true if evsel is itw own leader
void evsel__set_leader(struct evsel *evsel, struct evsel *leader);
- set leader for evsel
Committer notes:
Fix this when building with 'make BUILD_BPF_SKEL=1'
tools/perf/util/bpf_counter.c
- if (evsel->leader->core.nr_members > 1) {
+ if (evsel->core.leader->nr_members > 1) {
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Requested-by: Shunsuke Nakamura <nakamura.shun@fujitsu.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20210706151704.73662-4-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Perf has supported the CPU_PMU_CAPS feature to display a list of CPU PMU
capabilities. But on a hybrid platform, it may have several CPU PMUs (such
as "cpu_core" and "cpu_atom"). The CPU_PMU_CAPS feature is hard to extend
to support multiple CPU PMUs well if it needs to be compatible for the case
of old perf data file + new perf tool.
So for better compatibility we now create a new feature HYBRID_CPU_PMU_CAPS
in the header.
For the perf.data generated on hybrid platform,
root@otcpl-adl-s-2:~# perf report --header-only -I
# cpu_core pmu capabilities: branches=32, max_precise=3, pmu_name=alderlake_hybrid
# cpu_atom pmu capabilities: branches=32, max_precise=3, pmu_name=alderlake_hybrid
# missing features: TRACING_DATA BRANCH_STACK GROUP_DESC AUXTRACE STAT CLOCKID DIR_FORMAT COMPRESSED CPU_PMU_CAPS CLOCK_DATA
For the perf.data generated on non-hybrid platform
root@kbl-ppc:~# perf report --header-only -I
# cpu pmu capabilities: branches=32, max_precise=3, pmu_name=skylake
# missing features: TRACING_DATA BRANCH_STACK GROUP_DESC AUXTRACE STAT CLOCKID DIR_FORMAT COMPRESSED CLOCK_DATA HYBRID_TOPOLOGY HYBRID_CPU_PMU_CAPS
Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jin Yao <yao.jin@intel.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20210514122948.9472-3-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It is useful to let the user know about the hybrid topology.
Add the HYBRID_TOPOLOGY feature in header to indicate the core CPUs
and the atom CPUs.
With this patch a perf.data generated on a hybrid platform reports
the hybrid CPU list:
root@otcpl-adl-s-2:~# perf report --header-only -I
...
# hybrid cpu system:
# cpu_core cpu list : 0-15
# cpu_atom cpu list : 16-23
For a perf.data generated on a non-hybrid platform, reports a message
that HYBRID_TOPOLOGY is missing:
root@kbl-ppc:~# perf report --header-only -I
...
# missing features: TRACING_DATA BRANCH_STACK GROUP_DESC AUXTRACE STAT CLOCKID DIR_FORMAT COMPRESSED CLOCK_DATA HYBRID_TOPOLOGY
Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jin Yao <yao.jin@intel.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20210514122948.9472-2-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
