IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
We have two instances of the code to fill out the header for the aux
message. Pull it into a small helper.
v2: Rebase due to txbuf[] changes
Cc: Sean Paul <seanpaul@chromium.org>
Cc: Ramalingam C <ramalingam.c@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180222212802.4826-1-ville.syrjala@linux.intel.com
Reviewed-by: Ramalingam C <ramalingam.c@intel.com>
Let's try to keep the details on the AKSV stuff concentrated
in one place. So move the control bit and +5 data size handling
there.
v2: Increase txbuf[] to include the payload which intel_dp_aux_xfer()
will still load into the registers even though the hardware
will ignore it
Cc: Sean Paul <seanpaul@chromium.org>
Cc: Ramalingam C <ramalingam.c@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180222212732.4665-1-ville.syrjala@linux.intel.com
Reviewed-by: Ramalingam C <ramalingam.c@intel.com>
Enabling FBC on a plane having a Y-offset that isn't divisible by 4 may
cause pipe FIFO underruns and flickers, so disable FBC on such a config.
I tried the followings to work around the issue:
- enable each HW work around in ILK_DPFC_CHICKEN
- disable each compression algorithm in ILK_DPFC_CONTROL
- disable low-power watermarks
None of the above got rid of the problem. I haven't found this issue in
the Bspec/WA database either.
Besides the igt testcase below (yet to be merged) an easy way to
reproduce the issue is to enable a plane with FBC and a plane Y-offset
not aligned to 4 and then just enable/disable FBC in a loop, keeping the
plane enabled.
I could trigger the problem on BXT/GLK/SKL/CNL, so assume for now that it's
only present on GEN9 and GEN10.
v2: (Ville)
- Run the test/apply the WA on CNL as well.
- Use IS_GEN() instead of INTEL_GEN().
- Fix spelling.
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Testcase: igt/kms_plane/plane-clipping-pipe-A-planes
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180301134457.13974-1-imre.deak@intel.com
Add support for the COLOR_RANGE property on planes. This property
selects whether the input YCbCr data is to treated as limited range
or full range.
On most platforms this is a matter of setting the "YUV range correction
disable" bit, and on VLV/CHV we'll just have to program the color
correction logic to pass the data through unmodified.
v2: Rebase
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Daniel Stone <daniel@fooishbar.org>
Cc: Russell King - ARM Linux <linux@armlinux.org.uk>
Cc: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: Hans Verkuil <hverkuil@xs4all.nl>
Cc: Uma Shankar <uma.shankar@intel.com>
Cc: Shashank Sharma <shashank.sharma@intel.com>
Cc: Jyri Sarha <jsarha@ti.com>
Reviewed-by: Shashank Sharma <shashank.sharma@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180214192327.3250-9-ville.syrjala@linux.intel.com
Bring us forward from the stone age and switch our default YCbCr->RGB
conversion matrix to BT.709 from BT.601. I would expect most matrial
to be BT.709 these days.
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Daniel Stone <daniel@fooishbar.org>
Cc: Russell King - ARM Linux <linux@armlinux.org.uk>
Cc: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: Hans Verkuil <hverkuil@xs4all.nl>
Cc: Uma Shankar <uma.shankar@intel.com>
Cc: Shashank Sharma <shashank.sharma@intel.com>
Cc: Jyri Sarha <jsarha@ti.com>
Acked-by: Shashank Sharma <shashank.sharma@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180214192327.3250-8-ville.syrjala@linux.intel.com
Add support for the COLOR_ENCODING plane property which selects
the matrix coefficients used for the YCbCr->RGB conversion. Our
hardware can generally handle BT.601 and BT.709.
CHV pipe B sprites have a fully programmable matrix, so in theory
we could handle anything, but it doesn't seem all that useful to
expose anything beyond BT.601 and BT.709 at this time.
GLK can supposedly do BT.2020, but let's leave enabling that for
the future as well.
v2: Rename bit defines to match the spec more closely (Shashank)
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Daniel Stone <daniel@fooishbar.org>
Cc: Russell King - ARM Linux <linux@armlinux.org.uk>
Cc: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: Hans Verkuil <hverkuil@xs4all.nl>
Cc: Uma Shankar <uma.shankar@intel.com>
Cc: Shashank Sharma <shashank.sharma@intel.com>
Cc: Jyri Sarha <jsarha@ti.com>
Reviewed-by: Shashank Sharma <shashank.sharma@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180214192327.3250-7-ville.syrjala@linux.intel.com
On GLK the plane CSC controls moved into the COLOR_CTL register.
Update the code to progam the YCbCr->RGB CSC mode correctly when
faced with an YCbCr framebuffer.
The spec is rather confusing as it calls the mode "YUV601 to RGB709".
I'm going to assume that just means it's going to use the YCbCr->RGB
matrix as specified in BT.601 and doesn't actually change the gamut.
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Daniel Stone <daniel@fooishbar.org>
Cc: Russell King - ARM Linux <linux@armlinux.org.uk>
Cc: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: Hans Verkuil <hverkuil@xs4all.nl>
Cc: Uma Shankar <uma.shankar@intel.com>
Cc: Shashank Sharma <shashank.sharma@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180214192327.3250-6-ville.syrjala@linux.intel.com
Reviewed-by: Imre Deak <imre.deak@intel.com>
Turns out the VLV/CHV fixed function sprite CSC expects full range
data as input. We've been feeding it limited range data to it all
along. To expand the data out to full range we'll use the color
correction registers (brightness, contrast, and saturation).
On CHV pipe B we were actually doing the right thing already because we
progammed the custom CSC matrix to do expect limited range input. Now
that well pre-expand the data out with the color correction unit, we
need to change the CSC matrix to operate with full range input instead.
This should make the sprite output of the other pipes match the sprite
output of pipe B reasonably well. Looking at the resulting pipe CRCs,
there can be a slight difference in the output, but as I don't know
the formula used by the fixed function CSC of the other pipes, I don't
think it's worth the effort to try to match the output exactly. It
might not even be possible due to difference in internal precision etc.
One slight caveat here is that the color correction registers are single
bufferred, so we should really be updating them during vblank, but we
still don't have a mechanism for that, so just toss in another FIXME.
v2: Rebase
v3: s/bri/brightness/ s/con/contrast/ (Shashank)
v4: Clarify the constants and math (Shashank)
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Daniel Stone <daniel@fooishbar.org>
Cc: Russell King - ARM Linux <linux@armlinux.org.uk>
Cc: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: Hans Verkuil <hverkuil@xs4all.nl>
Cc: Shashank Sharma <shashank.sharma@intel.com>
Cc: Uma Shankar <uma.shankar@intel.com>
Cc: Jyri Sarha <jsarha@ti.com>
Cc: "Tang, Jun" <jun.tang@intel.com>
Reported-by: "Tang, Jun" <jun.tang@intel.com>
Cc: stable@vger.kernel.org
Fixes: 7f1f3851feb0 ("drm/i915: sprite support for ValleyView v4")
Reviewed-by: Shashank Sharma <shashank.sharma@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180214192327.3250-5-ville.syrjala@linux.intel.com
Include color_enconding and color_range in the plane state dump.
v2: Add kerneldoc (danvet)
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Daniel Stone <daniel@fooishbar.org>
Cc: Russell King - ARM Linux <linux@armlinux.org.uk>
Cc: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: Hans Verkuil <hverkuil@xs4all.nl>
Cc: Uma Shankar <uma.shankar@intel.com>
Cc: Shashank Sharma <shashank.sharma@intel.com>
Cc: Jyri Sarha <jsarha@ti.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180219202846.10628-1-ville.syrjala@linux.intel.com
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Add a standard optional properties to support different non RGB color
encodings in DRM planes. COLOR_ENCODING select the supported non RGB
color encoding, for instance ITU-R BT.709 YCbCr. COLOR_RANGE selects
the value ranges within the selected color encoding. The properties
are stored to drm_plane object to allow different set of supported
encoding for different planes on the device.
v2: Add/fix kerneldocs, verify bitmasks (danvet)
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Daniel Stone <daniel@fooishbar.org>
Cc: Russell King - ARM Linux <linux@armlinux.org.uk>
Cc: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: Hans Verkuil <hverkuil@xs4all.nl>
Cc: Uma Shankar <uma.shankar@intel.com>
Cc: Shashank Sharma <shashank.sharma@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jyri Sarha <jsarha@ti.com>
[vsyrjala v2: Add/fix kerneldocs, verify bitmasks]
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180219202823.10508-1-ville.syrjala@linux.intel.com
Acked-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
GuC load function is named intel_guc_fw_upload() and HuC load function is
named intel_huc_init_hw(). Make them consistent intel_*_fw_upload. Also
move HuC fw loading functions and declarations to separate files
intel_huc_fw.c|h like GuC.
While at this, do below changes
1. Update kernel-doc comment for intel_*_fw_upload() functions
2. s/huc_ucode_xfer/huc_fw_xfer
3. Introduce intel_huc_fw_init_early()
v2: Changed patch to update HuC functions instead of changing
guc_fw_upload and update file structure. (Michal Wajdeczko)
v3: Added SPDX License identifier to huc_fw.c|h. (Michal Wajdeczko)
Signed-off-by: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Cc: Michal Winiarski <michal.winiarski@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/1519922745-25441-1-git-send-email-sagar.a.kamble@intel.com
While A83T HDMI PHY seems to be just customized Synopsys HDMI PHY, H3
HDMI PHY is completely custom PHY.
However, they still have many things in common like clock and reset
setup, setting sync polarity and more.
Add support for H3 HDMI PHY variant.
While documentation exists for this PHY variant, it doesn't go in great
details. Because of that, almost all settings are copied from BSP linux
4.4. Interestingly, those settings are slightly different to those found
in a older BSP with Linux 3.4. For now, no user visible difference was
found between them.
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180301213442.16677-13-jernej.skrabec@siol.net
There are multiple variants of DW HDMI PHYs in Allwinner SoCs. While
some things like clock and reset setup are the same, PHY configuration
differs a lot.
Split out code which is PHY specific to separate functions and create
a structure which holds pointers to those functions.
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180301213442.16677-11-jernej.skrabec@siol.net
Current polarity configuration code is cleary wrong since it compares
same flag two times. However, even if flag name is fixed, it won't work
well for resolutions which have one polarity positive and another
negative.
Fix that by properly set each bit according to each polarity. Since
those two bits are not described in any documentation, relationships
were obtained by experimentation.
Fixes: b7c7436a5ff0 ("drm/sun4i: Implement A83T HDMI driver")
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180301213442.16677-10-jernej.skrabec@siol.net
Moving the check upwards will mean we we no longer have to add planes
and connectors manually, because everything is handled correctly by
drm_atomic_helper_check_modeset() as intended.
[applied with whitespace changes to make sparse happy]
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Lyude Paul <lyude@redhat.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180221092808.30060-1-maarten.lankhorst@linux.intel.com
Now that we can pass arbitrary commands into the base __wait_for()
macro, we can reimplement the open-coded wait-for inside
i915_gem_idle_work_handler() using the new macro. This means that instead
of using ktime, we now use jiffies, and benefit from the exponential sleep
backoff that allows a fast response if the HW settles quickly.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180301103338.5380-1-chris@chris-wilson.co.uk
The read/write pointers on sdma4 devices increment
beyond the ring size and should be masked. Tested
on my Ryzen 2400G.
Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
sometimes GPU is switched to other VFs and won't swich
back soon, so the kiq reg access will not signal within
a short period, instead of busy waiting a long time(MAX_KEQ_REG_WAIT)
and returning TMO we can istead sleep 5ms and try again
later (non irq context)
And since the waiting in kiq_r/weg is busy wait, so MAX_KIQ_REG_WAIT
shouldn't set to a long time, set it to 10ms is more appropriate.
if gpu already in reset state, don't retry the KIQ reg access
otherwise it would always hang because KIQ was already die usually.
v2:
replace schedule() with msleep() for the wait
v3:
use while loop for the wait repeating
use macros for the sleep period
more description for it
v4:
drop unused variable
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com
Reviewed-by: Pixel Ding <Pixel.Ding@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
1)create a routine "handle_vram_lost" to do the vram
recovery, and put it into amdgpu_device_reset/reset_sriov,
this way no need of the extra paramter to hold the
VRAM LOST information and the related macros can be removed.
3)show vram_recover failure if time out, and set TMO equal to
lockup_timeout if vram_recover is under SRIOV runtime mode.
4)report error if any ip reset failed for SR-IOV
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Acked-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
found recover_vram_from_shadow sometimes get executed
in paralle with SDMA scheduler, should stop all
schedulers before doing gpu reset/recover
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Tested-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In bind the psr handler gets registered first before the core
analogix_dp_bind() gets called. So it should be the other way
around in unbind, first unbind the analogix_dp and then
unregister the psr.
Signed-off-by: Jeffy Chen <jeffy.chen@rock-chips.com>
Signed-off-by: Thierry Escande <thierry.escande@collabora.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/76025075.yWNtk1v57f@phil
The rockchip_drm_psr_register() can fail, so add a sanity check for that.
Signed-off-by: Jeffy Chen <jeffy.chen@rock-chips.com>
Signed-off-by: Thierry Escande <thierry.escande@collabora.com>
[moved psr_unregister reordering in unbind to separate patch]
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20180110162348.22765-4-thierry.escande@collabora.com
Since we are initing connector in the core driver and encoder in the
plat driver, let's clean them up in the right places.
Signed-off-by: Jeffy Chen <jeffy.chen@rock-chips.com>
Signed-off-by: Thierry Escande <thierry.escande@collabora.com>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20180110162348.22765-3-thierry.escande@collabora.com
The driver that instantiates the bridge should own the drvdata, as all
driver model callbacks (probe, remove, shutdown, PM ops, etc.) are also
owned by its driver struct. Moreover, storing two different pointer
types in driver data depending on driver initialization status is barely
a good practice and in fact has led to many bugs in this driver.
Let's clean up this mess and change Analogix entry points to simply
accept some opaque struct pointer, adjusting their users at the same
time to avoid breaking the compilation.
Signed-off-by: Tomasz Figa <tfiga@chromium.org>
Signed-off-by: Jeffy Chen <jeffy.chen@rock-chips.com>
Signed-off-by: Thierry Escande <thierry.escande@collabora.com>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Acked-by: Jingoo Han <jingoohan1@gmail.com>
Acked-by: Archit Taneja <architt@codeaurora.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20180110162348.22765-2-thierry.escande@collabora.com
We're seeing on CI that some contexts don't have the programmed OA
period timer that directs the OA unit on how often to write reports.
The issue is that we're not holding the drm lock from when we edit the
context images down to when we set the exclusive_stream variable. This
leaves a window for the deferred context allocation to call
i915_oa_init_reg_state() that will not program the expected OA timer
value, because we haven't set the exclusive_stream yet.
v2: Drop need_lock from gen8_configure_all_contexts() (Matt)
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Fixes: 701f8231a2f ("drm/i915/perf: prune OA configs")
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=102254
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=103715
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=103755
Link: https://patchwork.freedesktop.org/patch/msgid/20180301110613.1737-1-lionel.g.landwerlin@intel.com
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: intel-gfx@lists.freedesktop.org
Cc: <stable@vger.kernel.org> # v4.14+
Currently we are calling scl_vop_cal_scale() to get vskiplines for yrgb
and cbcr. So the cbcr's vskiplines might be an unexpected value if the
second scl_vop_cal_scale() didn't update it.
Init vskiplines in scl_vop_cal_scale() to avoid that.
Signed-off-by: Jeffy Chen <jeffy.chen@rock-chips.com>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20180223062250.10470-1-jeffy.chen@rock-chips.com
Since we are trying to access components' resources in the master's
suspend/resume PM callbacks(e.g. panel), add device links to correct
the suspend/resume and shutdown ordering.
Signed-off-by: Jeffy Chen <jeffy.chen@rock-chips.com>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20180207175309.21095-1-enric.balletbo@collabora.com
v2: Rebase.
v3:
* Remove DPF, it has been removed from SKL+.
* Fix -internal rebase wrt. execlists interrupt handling.
v4: Rebase.
v5:
* Updated for POR changes. (Daniele Ceraolo Spurio)
* Merged with irq handling fixes by Daniele Ceraolo Spurio:
* Simplify the code by using gen8_cs_irq_handler.
* Fix interrupt handling for the upstream kernel.
v6:
* Remove early bringup debug messages (Tvrtko)
* Add NB about arbitrary spin wait timeout (Tvrtko)
v7 (from Paulo):
* Don't try to write RO bits to registers.
* Don't check for PCH types that don't exist. PCH interrupts are not
here yet.
v9:
* squashed in selector and shared register handling (Daniele)
* skip writing of irq if data is not valid (Daniele)
* use time_after32 (Chris)
* use I915_MAX_VCS and I915_MAX_VECS (Daniele)
* remove fake pm interrupt handling for later patch (Mika)
v10:
* Direct processing of banks. clear banks early (Chris)
* remove poll on valid bit, only clear valid bit (Mika)
* use raw accessors, better naming (Chris)
v11:
* adapt to raw_reg_[read|write]
* bring back polling the valid bit (Daniele)
v12:
* continue if unset intr_dw (Daniele)
* comment the usage of gen8_de_irq_handler bits (Daniele)
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Oscar Mateo <oscar.mateo@intel.com>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Oscar Mateo <oscar.mateo@intel.com>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180228101153.7224-2-mika.kuoppala@linux.intel.com
Gen11 will add more VCS and VECS rings so prepare the
infrastructure to support that.
Bspec: 7021
v2: Rebase.
v3: Rebase.
v4: Rebase.
v5: Rebase.
v6:
- Update for POR changes. (Daniele Ceraolo Spurio)
- Add provisional guc engine ids - to be checked and confirmed.
v7:
- Rebased.
- Added the new ring masks.
- Added the new HW ids.
v8:
- Introduce I915_MAX_VCS/VECS to avoid magic numbers (Michal)
v9: increase MAX_ENGINE_INSTANCE to 3
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Oscar Mateo <oscar.mateo@intel.com>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Oscar Mateo <oscar.mateo@intel.com>
Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180228101153.7224-1-mika.kuoppala@linux.intel.com
To pull in the HDCP changes, especially wait_for changes to drm/i915
that Chris wants to build on top of.
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
dp_rates[] array is a superset of all the link rates supported
by sink devices. DP 1.3 specification adds HBR3 (8.1Gbps) link rate
to the set of link rates supported by sink. This patch adds this rate
to dp_rates[] array that gets used to populate the sink_rates[]
array limited by max rate obtained from DP_MAX_LINK_RATE DPCD register.
v2:
* Rebased on top of Jani's localized rates patch
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1519857110-26916-1-git-send-email-manasi.d.navare@intel.com
Driver Changes:
- Lift alpha_support protection from Cannonlake (Rodrigo)
* Meaning the driver should mostly work for the hardware we had
at our disposal when testing
* Used to be preliminary_hw_support
- Add missing Cannonlake PCI device ID of 0x5A4C (Rodrigo)
- Cannonlake port register fix (Mahesh)
- Fix Dell Venue 8 Pro black screen after modeset (Hans)
- Fix for always returning zero out-fence from execbuf (Daniele)
- Fix HDMI audio when no no relevant video output is active (Jani)
- Fix memleak of VBT data on driver_unload (Hans)
- Fix for KASAN found locking issue (Maarten)
- RCU barrier consolidation to improve igt/gem_sync/idle (Chris)
- Optimizations to IRQ handlers (Chris)
- vblank tracking improvements (64-bit resolution, PM) (Dhinakaran)
- Pipe select bit corrections (Ville)
- Reduce runtime computed device_info fields (Chris)
- Tune down some WARN_ONs to GEM_BUG_ON now that CI has good coverage (Chris)
- A bunch of kerneldoc warning fixes (Chris)
* tag 'drm-intel-next-2018-02-21' of git://anongit.freedesktop.org/drm/drm-intel: (113 commits)
drm/i915: Update DRIVER_DATE to 20180221
drm/i915/fbc: Use PLANE_HAS_FENCE to determine if the plane is fenced
drm/i915/fbdev: Use the PLANE_HAS_FENCE flags from the time of pinning
drm/i915: Move the policy for placement of the GGTT vma into the caller
drm/i915: Also check view->type for a normal GGTT view
drm/i915: Drop WaDoubleCursorLP3Latency:ivb
drm/i915: Set the primary plane pipe select bits on gen4
drm/i915: Don't set cursor pipe select bits on g4x+
drm/i915: Assert that we don't overflow frontbuffer tracking bits
drm/i915: Track number of pending freed objects
drm/i915/: Initialise trans_min for skl_compute_transition_wm()
drm/i915: Clear the in-use marker on execbuf failure
drm/i915: Prune gen8_gt_irq_handler
drm/i915: Track GT interrupt handling using the master iir
drm/i915: Remove WARN_ONCE for failing to pm_runtime_if_in_use
drm: intel_dpio_phy: fix kernel-doc comments at nested struct
drm/i915: Release connector iterator on a digital port conflict.
drm/i915/execlists: Remove too early assert
drm/i915: Assert that we always complete a submission to guc/execlists
drm: move read_domains and write_domain into i915
...
Localize link rate arrays by moving them to the functions where they're
used. Further clarify the distinction between source and sink
capabilities. Split pre and post Haswell arrays, and get rid of the
array size arithmetics. Use a direct rate value in the paranoia case of
no common rates find.
Cc: Manasi Navare <manasi.d.navare@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180227105911.4485-1-jani.nikula@intel.com
Some were missing the close parens around options.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When using CPU to update page table, we need to kmap all the PDs/PTs after
they are allocated and that requires a TLB shot down on each CPU, which is
quite heavy.
Instead, we map the whole visible VRAM to a kernel address at once. Pages
can be obtained from the offset.
v2: move the mapping base from gmc to amdgpu_mman structure, and the
implementation in amdgpu_ttm_* functions
Signed-off-by: Amber Lin <Amber.Lin@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Currently all cursor related functions are made to all
pipes that are attached to a particular stream.
This is not applicable to pipes that do not have cursor plane
initialised like underlay.
Hence this patch allows cursor related operations on a pipe
only if ipp in available on that particular pipe.
The check is added to set_cursor_position & set_cursor_attribute.
Signed-off-by: Shirish S <shirish.s@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
The drm layer expects aux->transfer() to return the payload bytes read.
Currently dm_dp_aux_transfer() returns the payload size which does not
gets updated during the read, hence not giving the right data for the
drm layer to pars edid. This leads to the drm layer to conclude as the
edid is BAD and hence some monitors/devices dont get detected properly.
This patch changes the return type of dm_dp_aux_transfer() to actual
bytes read during DP_AUX_NATIVE_READ & DP_AUX_I2C_READ.
Signed-off-by: Shirish S <shirish.s@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Calling devm_of_find_backlight directly means we get a link failure
without CONFIG_BACKLIGHT_CLASS_DEVICE:
drivers/gpu/drm/tinydrm/mi0283qt.o: In function `mi0283qt_probe':
mi0283qt.c:(.text+0x684): undefined reference to `devm_of_find_backlight'
This adds an explicit Kconfig dependency for it. While I did not
observe that failure for st7735r, I assume the same change is needed
there for the same reason.
Fixes: d1a2e7004b5e ("drm/tinydrm: Replace tinydrm_of_find_backlight with of_find_backlight")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20180228134111.2042877-1-arnd@arndb.de
otherwise there will be DMAR reading error comes out from CP since
GFX is still alive and CPC's WPTR_POLL is still enabled, which would
lead to DMAR read error.
fix:
we can hault CPG after hw_fini, but cannot halt CPC becaues KIQ
stil need to be alive to let RLCV invoke, but its WPTR_POLL could
be disabled.
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
should use bo_create_kernel instead of split to two
function that create and pin the SA bo
issue:
before this patch, there are DMAR read error in host
side when running SRIOV test, the DMAR address dropped
in the range of SA bo.
fix:
after this cleanups of SA init and fini, above DMAR
eror gone.
v2:
keep sa_bo's fini instead of suspend, to keep
reporting error
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
the original method will change the wptr value in wb.
v2:
furthur cleanup
Signed-off-by: Emily Deng <Emily.Deng@amd.com>
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
issue:
sometime GFX/MM ib test hit timeout under SRIOV env, root cause
is that engine doesn't come back soon enough so the current
IB test considered as timed out.
fix:
for SRIOV GFX IB test wait time need to be expanded a lot during
SRIOV runtimei mode since it couldn't really begin before GFX engine
come back.
for SRIOV MM IB test it always need more time since MM scheduling
is not go together with GFX engine, it is controled by h/w MM
scheduler so no matter runtime or exclusive mode MM IB test
always need more time.
v2:
use ring type instead of idx to judge
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
SRIOV doesn't give VF cg/pg feature so the MM's idle_work
is skipped for SR-IOV
v2:
remove superfluous changes
since idle_work is not scheduled for SR-IOV so the condition
check for SR-IOV inside idle_work also can be dropped
v3:
drop the SRIOV check in amdgpu_vce/uvd_suspend
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
