IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Currently, a limit of 0 results in a hard coded metering over 6 hours.
Since the default is a set limit, I suspect no one truly depends on this
rather arbitrary setting. Repurpose it for an arguably more useful
"unlimited" mode, where the delay is 0.
Note that if block groups are too new, or go fully empty, there is still
a delay associated with those conditions. Those delays implement
heuristics for not trimming a region we are relatively likely to fully
overwrite soon.
CC: stable@vger.kernel.org # 6.2+
Reviewed-by: Neal Gompa <neal@gompa.dev>
Signed-off-by: Boris Burkov <boris@bur.io>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Previously, the default was a relatively conservative 10. This results
in a 100ms delay, so with ~300 discards in a commit, it takes the full
30s till the next commit to finish the discards. On a workstation, this
results in the disk never going idle, wasting power/battery, etc.
Set the default to 1000, which results in using the smallest possible
delay, currently, which is 1ms. This has shown to not pathologically
keep the disk busy by the original reporter.
Link: https://lore.kernel.org/linux-btrfs/Y%2F+n1wS%2F4XAH7X1p@nz/
Link: https://bugzilla.redhat.com/show_bug.cgi?id=2182228
CC: stable@vger.kernel.org # 6.2+
Reviewed-by: Neal Gompa <neal@gompa.dev
Signed-off-by: Boris Burkov <boris@bur.io>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This partially reverts commit e161d4b60ae3a5356e07202e0bfedb5fad82c6aa.
Turns out the channelmap variable is not actually read-only, it's modified
through the MCI_GPM_CLR_CHANNEL_BIT() macro further down in the function,
so making it read-only causes page faults when that code is hit.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=217183
Link: https://lore.kernel.org/r/20230413214118.153781-1-toke@toke.dk
Fixes: e161d4b60ae3 ("wifi: ath9k: Make arrays prof_prio and channelmap static const")
Cc: stable@vger.kernel.org
Signed-off-by: Toke Høiland-Jørgensen <toke@toke.dk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
- Build: Rust + GCC build fix and 'grep' warning fix.
- Code: Missing 'extern "C"' fix.
- Scripts: 'is_rust_module.sh' and 'generate_rust_analyzer.py' fixes.
- A couple trivial fixes.
-----BEGIN PGP SIGNATURE-----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=zdCa
-----END PGP SIGNATURE-----
Merge tag 'rust-fixes-6.3' of https://github.com/Rust-for-Linux/linux
Pull Rust fixes from Miguel Ojeda:
"Most of these are straightforward.
The last one is more complex, but it only touches Rust + GCC builds
which are for the moment best-effort.
- Code: Missing 'extern "C"' fix.
- Scripts: 'is_rust_module.sh' and 'generate_rust_analyzer.py' fixes.
- A couple trivial fixes
- Build: Rust + GCC build fix and 'grep' warning fix"
* tag 'rust-fixes-6.3' of https://github.com/Rust-for-Linux/linux:
rust: allow to use INIT_STACK_ALL_ZERO
rust: fix regexp in scripts/is_rust_module.sh
rust: build: Fix grep warning
scripts: generate_rust_analyzer: Handle sub-modules with no Makefile
rust: kernel: Mark rust_fmt_argument as extern "C"
rust: sort uml documentation arch support table
rust: str: fix requierments->requirements typo
Commit 6fffbc7ae137 ("PCI: Honor firmware's device disabled status")
checked the firmware device status for both DT and ACPI devices. That
caused a regression in some ACPI systems. The exact reason isn't clear.
It's possibly a firmware bug. For now, at least, refactor the check to
be for DT based systems only.
Note that the original implementation leaked a refcount which is now
correctly handled.
[bhelgaas: Per ACPI r6.5, sec 6.3.7, for devices on an enumerable bus, _STA
must return with bit[0] ("device is present") set]
Link: https://lore.kernel.org/all/m2fs9lgndw.fsf@gmail.com/
Fixes: 6fffbc7ae137 ("PCI: Honor firmware's device disabled status")
Link: https://lore.kernel.org/r/20230419193513.708818-1-robh@kernel.org
Link: https://bugzilla.kernel.org/show_bug.cgi?id=217317
Reported-by: Donald Hunter <donald.hunter@gmail.com>
Reported-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Tested-by: Donald Hunter <donald.hunter@gmail.com>
Tested-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: Binbin Zhou <zhoubinbin@loongson.cn>
Cc: Liu Peibao <liupeibao@loongson.cn>
Cc: Huacai Chen <chenhuacai@loongson.cn>
Current release - regressions:
- sched: clear actions pointer in miss cookie init fail
- mptcp: fix accept vs worker race
- bpf: fix bpf_arch_text_poke() with new_addr == NULL on s390
- eth: bnxt_en: fix a possible NULL pointer dereference in unload path
- eth: veth: take into account peer device for NETDEV_XDP_ACT_NDO_XMIT xdp_features flag
Current release - new code bugs:
- eth: revert "net/mlx5: Enable management PF initialization"
Previous releases - regressions:
- netfilter: fix recent physdev match breakage
- bpf: fix incorrect verifier pruning due to missing register precision taints
- eth: virtio_net: fix overflow inside xdp_linearize_page()
- eth: cxgb4: fix use after free bugs caused by circular dependency problem
- eth: mlxsw: pci: fix possible crash during initialization
Previous releases - always broken:
- sched: sch_qfq: prevent slab-out-of-bounds in qfq_activate_agg
- netfilter: validate catch-all set elements
- bridge: don't notify FDB entries with "master dynamic"
- eth: bonding: fix memory leak when changing bond type to ethernet
- eth: i40e: fix accessing vsi->active_filters without holding lock
Misc:
- Mat is back as MPTCP co-maintainer
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----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=xUNa
-----END PGP SIGNATURE-----
Merge tag 'net-6.3-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from netfilter and bpf.
There are a few fixes for new code bugs, including the Mellanox one
noted in the last networking pull. No known regressions outstanding.
Current release - regressions:
- sched: clear actions pointer in miss cookie init fail
- mptcp: fix accept vs worker race
- bpf: fix bpf_arch_text_poke() with new_addr == NULL on s390
- eth: bnxt_en: fix a possible NULL pointer dereference in unload
path
- eth: veth: take into account peer device for
NETDEV_XDP_ACT_NDO_XMIT xdp_features flag
Current release - new code bugs:
- eth: revert "net/mlx5: Enable management PF initialization"
Previous releases - regressions:
- netfilter: fix recent physdev match breakage
- bpf: fix incorrect verifier pruning due to missing register
precision taints
- eth: virtio_net: fix overflow inside xdp_linearize_page()
- eth: cxgb4: fix use after free bugs caused by circular dependency
problem
- eth: mlxsw: pci: fix possible crash during initialization
Previous releases - always broken:
- sched: sch_qfq: prevent slab-out-of-bounds in qfq_activate_agg
- netfilter: validate catch-all set elements
- bridge: don't notify FDB entries with "master dynamic"
- eth: bonding: fix memory leak when changing bond type to ethernet
- eth: i40e: fix accessing vsi->active_filters without holding lock
Misc:
- Mat is back as MPTCP co-maintainer"
* tag 'net-6.3-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (33 commits)
net: bridge: switchdev: don't notify FDB entries with "master dynamic"
Revert "net/mlx5: Enable management PF initialization"
MAINTAINERS: Resume MPTCP co-maintainer role
mailmap: add entries for Mat Martineau
e1000e: Disable TSO on i219-LM card to increase speed
bnxt_en: fix free-runnig PHC mode
net: dsa: microchip: ksz8795: Correctly handle huge frame configuration
bpf: Fix incorrect verifier pruning due to missing register precision taints
hamradio: drop ISA_DMA_API dependency
mlxsw: pci: Fix possible crash during initialization
mptcp: fix accept vs worker race
mptcp: stops worker on unaccepted sockets at listener close
net: rpl: fix rpl header size calculation
net: vmxnet3: Fix NULL pointer dereference in vmxnet3_rq_rx_complete()
bonding: Fix memory leak when changing bond type to Ethernet
veth: take into account peer device for NETDEV_XDP_ACT_NDO_XMIT xdp_features flag
mlxfw: fix null-ptr-deref in mlxfw_mfa2_tlv_next()
bnxt_en: Fix a possible NULL pointer dereference in unload path
bnxt_en: Do not initialize PTP on older P3/P4 chips
netfilter: nf_tables: tighten netlink attribute requirements for catch-all elements
...
This reverts commit 23f3e3272e7a4d9fb870485cd6df1e4f9539282c.
blk-mq sched bio merge still needs request to grab queue usage counter,
so we can't simply call blk_mq_attempt_bio_merge() when queue usage
counter isn't held.
Fixes: 23f3e3272e7a ("block: Merge bio before checking ->cached_rq")
Cc: Xiao Ni <xni@redhat.com>
Reported-by: Yi Zhang <yi.zhang@redhat.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20230420112018.1108058-1-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
There is a structural problem in switchdev, where the flag bits in
struct switchdev_notifier_fdb_info (added_by_user, is_local etc) only
represent a simplified / denatured view of what's in struct
net_bridge_fdb_entry :: flags (BR_FDB_ADDED_BY_USER, BR_FDB_LOCAL etc).
Each time we want to pass more information about struct
net_bridge_fdb_entry :: flags to struct switchdev_notifier_fdb_info
(here, BR_FDB_STATIC), we find that FDB entries were already notified to
switchdev with no regard to this flag, and thus, switchdev drivers had
no indication whether the notified entries were static or not.
For example, this command:
ip link add br0 type bridge && ip link set swp0 master br0
bridge fdb add dev swp0 00:01:02:03:04:05 master dynamic
has never worked as intended with switchdev. It causes a struct
net_bridge_fdb_entry to be passed to br_switchdev_fdb_notify() which has
a single flag set: BR_FDB_ADDED_BY_USER.
This is further passed to the switchdev notifier chain, where interested
drivers have no choice but to assume this is a static (does not age) and
sticky (does not migrate) FDB entry. So currently, all drivers offload
it to hardware as such, as can be seen below ("offload" is set).
bridge fdb get 00:01:02:03:04:05 dev swp0 master
00:01:02:03:04:05 dev swp0 offload master br0
The software FDB entry expires $ageing_time centiseconds after the
kernel last sees a packet with this MAC SA, and the bridge notifies its
deletion as well, so it eventually disappears from hardware too.
This is a problem, because it is actually desirable to start offloading
"master dynamic" FDB entries correctly - they should expire $ageing_time
centiseconds after the *hardware* port last sees a packet with this
MAC SA - and this is how the current incorrect behavior was discovered.
With an offloaded data plane, it can be expected that software only sees
exception path packets, so an otherwise active dynamic FDB entry would
be aged out by software sooner than it should.
With the change in place, these FDB entries are no longer offloaded:
bridge fdb get 00:01:02:03:04:05 dev swp0 master
00:01:02:03:04:05 dev swp0 master br0
and this also constitutes a better way (assuming a backport to stable
kernels) for user space to determine whether the kernel has the
capability of doing something sane with these or not.
As opposed to "master dynamic" FDB entries, on the current behavior of
which no one currently depends on (which can be deduced from the lack of
kselftests), Ido Schimmel explains that entries with the "extern_learn"
flag (BR_FDB_ADDED_BY_EXT_LEARN) should still be notified to switchdev,
since the spectrum driver listens to them (and this is kind of okay,
because although they are treated identically to "static", they are
expected to not age, and to roam).
Fixes: 6b26b51b1d13 ("net: bridge: Add support for notifying devices about FDB add/del")
Link: https://lore.kernel.org/netdev/20230327115206.jk5q5l753aoelwus@skbuf/
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Tested-by: Ido Schimmel <idosch@nvidia.com>
Link: https://lore.kernel.org/r/20230418155902.898627-1-vladimir.oltean@nxp.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
There is a HP ProBook 455 G10 which using ALC236 codec and need the
ALC236_FIXUP_HP_MUTE_LED_MICMUTE_VREF quirk to make mute LED and
micmute LED work.
Signed-off-by: Andy Chi <andy.chi@canonical.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20230420035942.66817-1-andy.chi@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
A few remaining small fixes for v6.3, all small driver specific ones.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmRATGwACgkQJNaLcl1U
h9B1eQf+Miu2/EzjXoZ5nW3yxU3zJmu7BINhvb3pLlUxkNNxz/FG6chZgO+K17F4
VlaOc8UkhjXPe2BRZljF34qHPLMdyUlX4bi4NmCMikzC8h7xDvpIONYt66v4y2Du
bMEYbmbrVjkK83ZKjnHaSX9iC/qXkV/WQKyMTe7gR/pz2M5epwK6Q8iCtxITfYZt
tlKnp4MjdFiEbzvVcylaJi0sDHozRYtT5kFpKrJQNVLjgnISUbkR03wME3wYG69m
wlQbdDlkU+JOyiwLCkt+U5z4nLmPIgFHnb8frZTBUpSu4iqFesY69Jbh7XUWQyHi
dwiDoyR80CKV5ILmoeIzzzBgDXQV2g==
=EK/5
-----END PGP SIGNATURE-----
Merge tag 'asoc-fix-v6.3-rc7' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v6.3
A few remaining small fixes for v6.3, all small driver specific ones.
Every caller passes in zero, meaning they don't want any partial copy to
zero the remainder of the destination buffer.
Which is just as well, because the implementation of that function
didn't actually even look at that argument, and wasn't even aware it
existed, although some misleading comments did mention it still.
The 'zerorest' thing is a historical artifact of how "copy_from_user()"
worked, in that it would zero the rest of the kernel buffer that it
copied into.
That zeroing still exists, but it's long since been moved to generic
code, and the raw architecture-specific code doesn't do it. See
_copy_from_user() in lib/usercopy.c for this all.
However, while __copy_user_nocache() shares some history and superficial
other similarities with copy_from_user(), it is in many ways also very
different.
In particular, while the code makes it *look* similar to the generic
user copy functions that can copy both to and from user space, and take
faults on both reads and writes as a result, __copy_user_nocache() does
no such thing at all.
__copy_user_nocache() always copies to kernel space, and will never take
a page fault on the destination. What *can* happen, though, is that the
non-temporal stores take a machine check because one of the use cases is
for writing to stable memory, and any memory errors would then take
synchronous faults.
So __copy_user_nocache() does look a lot like copy_from_user(), but has
faulting behavior that is more akin to our old copy_in_user() (which no
longer exists, but copied from user space to user space and could fault
on both source and destination).
And it very much does not have the "zero the end of the destination
buffer", since a problem with the destination buffer is very possibly
the very source of the partial copy.
So this whole thing was just a confusing historical artifact from having
shared some code with a completely different function with completely
different use cases.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTFp0I1jqZrAX+hPRXbK58LschIgwUCZEBFUAAKCRDbK58LschI
g1i4AQCuuuxCHdFUSiEpJfKVObeYMpFzSMXzduuKTWW/03XDEgEAvLihZKfRlM3z
OxA/2ERQjjPIYeGrXBQ7xk2xpJN3Wgs=
=G6DS
-----END PGP SIGNATURE-----
Merge tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf
Daniel Borkmann says:
====================
bpf 2023-04-19
We've added 3 non-merge commits during the last 6 day(s) which contain
a total of 3 files changed, 34 insertions(+), 9 deletions(-).
The main changes are:
1) Fix a crash on s390's bpf_arch_text_poke() under a NULL new_addr,
from Ilya Leoshkevich.
2) Fix a bug in BPF verifier's precision tracker, from Daniel Borkmann
and Andrii Nakryiko.
3) Fix a regression in veth's xdp_features which led to a broken BPF CI
selftest, from Lorenzo Bianconi.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
bpf: Fix incorrect verifier pruning due to missing register precision taints
veth: take into account peer device for NETDEV_XDP_ACT_NDO_XMIT xdp_features flag
s390/bpf: Fix bpf_arch_text_poke() with new_addr == NULL
====================
Link: https://lore.kernel.org/r/20230419195847.27060-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2023-04-17 (i40e)
This series contains updates to i40e only.
Alex moves setting of active filters to occur under lock and checks/takes
error path in rebuild if re-initializing the misc interrupt vector
failed.
* '40GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
i40e: fix i40e_setup_misc_vector() error handling
i40e: fix accessing vsi->active_filters without holding lock
====================
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/20230417205245.1030733-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
19 are cc:stable and the remainder address issues which were introduced
during this merge cycle, or aren't considered suitable for -stable
backporting.
19 are for MM and the remainder are for other subsystems.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZEB7GgAKCRDdBJ7gKXxA
jl4zAP9LxKisY8L29qrZG/SKoYbMMSM33ASOGZJRAuRRaOYL6QEAvS14pg/c22rL
4GCZbzvENY4xPRbz/6kc/s2Jnuww4wA=
=Kh/V
-----END PGP SIGNATURE-----
Merge tag 'mm-hotfixes-stable-2023-04-19-16-36' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"22 hotfixes.
19 are cc:stable and the remainder address issues which were
introduced during this merge cycle, or aren't considered suitable for
-stable backporting.
19 are for MM and the remainder are for other subsystems"
* tag 'mm-hotfixes-stable-2023-04-19-16-36' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (22 commits)
nilfs2: initialize unused bytes in segment summary blocks
mm: page_alloc: skip regions with hugetlbfs pages when allocating 1G pages
mm/mmap: regression fix for unmapped_area{_topdown}
maple_tree: fix mas_empty_area() search
maple_tree: make maple state reusable after mas_empty_area_rev()
mm: kmsan: handle alloc failures in kmsan_ioremap_page_range()
mm: kmsan: handle alloc failures in kmsan_vmap_pages_range_noflush()
tools/Makefile: do missed s/vm/mm/
mm: fix memory leak on mm_init error handling
mm/page_alloc: fix potential deadlock on zonelist_update_seq seqlock
kernel/sys.c: fix and improve control flow in __sys_setres[ug]id()
Revert "userfaultfd: don't fail on unrecognized features"
writeback, cgroup: fix null-ptr-deref write in bdi_split_work_to_wbs
maple_tree: fix a potential memory leak, OOB access, or other unpredictable bug
tools/mm/page_owner_sort.c: fix TGID output when cull=tg is used
mailmap: update jtoppins' entry to reference correct email
mm/mempolicy: fix use-after-free of VMA iterator
mm/huge_memory.c: warn with pr_warn_ratelimited instead of VM_WARN_ON_ONCE_FOLIO
mm/mprotect: fix do_mprotect_pkey() return on error
mm/khugepaged: check again on anon uffd-wp during isolation
...
While using i219-LM card currently it was only possible to achieve
about 60% of maximum speed due to regression introduced in Linux 5.8.
This was caused by TSO not being disabled by default despite commit
f29801030ac6 ("e1000e: Disable TSO for buffer overrun workaround").
Fix that by disabling TSO during driver probe.
Fixes: f29801030ac6 ("e1000e: Disable TSO for buffer overrun workaround")
Signed-off-by: Sebastian Basierski <sebastianx.basierski@intel.com>
Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com>
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/20230417205345.1030801-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The patch in fixes changed the way real-time mode is chosen for PHC on
the NIC. Apparently there is one more use case of the check outside of
ptp part of the driver which was not converted to the new macro and is
making a lot of noise in free-running mode.
Fixes: 131db4991622 ("bnxt_en: reset PHC frequency in free-running mode")
Signed-off-by: Vadim Fedorenko <vadfed@meta.com>
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Link: https://lore.kernel.org/r/20230418202511.1544735-1-vadfed@meta.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
A small fix in the error handling for the rockchip driver, ensuring we
don't leak clock enables if we fail to request the interrupt for the
device.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmRATd4ACgkQJNaLcl1U
h9ApHAf/UdN/irP26Nyn2kyrZxxO2S7Ix22PR5uDaD5+YvCTUCPYVzRbSq5T3LQZ
Znm124tdz3Fwppmw06q7V1AAu4jtzdOKwiocdUn+KV1XH/WMdOOy7El7Fp71QVu1
8i8Dqt35KwRN1z1d/ts0ubDUFa+s6tEFaYIMtlcDLVSAJMwGEz9YCNBAMDqlINGc
jSccxA1vIm3xyVOhoAN/W0grivW6oEBVfaG5OlkX2MS+PZQUGy+IMHjVPCIxT5P4
s/eKrcQXOhuUS3WmIsvF1ynKsb7kSk2x4NgX2vZB+t2NIK9Z5P5sHlnpcuZXhF/t
peo8lR03e5okSDoL1x5vgej0hwFjQQ==
=eeQQ
-----END PGP SIGNATURE-----
Merge tag 'spi-fix-v6.3-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fix from Mark Brown:
"A small fix in the error handling for the rockchip driver, ensuring we
don't leak clock enables if we fail to request the interrupt for the
device"
* tag 'spi-fix-v6.3-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: spi-rockchip: Fix missing unwind goto in rockchip_sfc_probe()
A few driver specific fixes, one build coverage issue and a couple of
"someone typed in the wrong number" style errors in describing devices
to the subsystem.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmRATRkACgkQJNaLcl1U
h9DMXgf/VAjqftEWEhODJdw0YJ/trLc+eLOQckCmFnanE4dZSaEz+jCNedkBnI5n
Nx/seqHfnjCfnLOem6U7fhSxB65R2dTYoNn9KtrTd04vWgeFVJ1Njku5yjgDVz4m
vyY9/yG+KPsxFU41MPp94K6FVstHGRVW6AEpN+FPSCU7lRIwUZx4Dn4lzz/wLDn0
ZFqetWRQx6oZ2jSZI0yzjUs+A6l4Itd2Envo88qdjDrZYXadbjGt2UwKshCEmVFs
ovwPxZjyS7DWJpyJeGz5aLaaQfUQhh9OOQfllhSbd3Gmy5CCMw8FJmW7ZMN0mmOJ
pGQKmGVod3RFobb0aroT/dLwDZ8Jrg==
=hcUh
-----END PGP SIGNATURE-----
Merge tag 'regulator-fix-v6.3-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator fixes from Mark Brown:
"A few driver specific fixes, one build coverage issue and a couple of
'someone typed in the wrong number' style errors in describing devices
to the subsystem"
* tag 'regulator-fix-v6.3-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: sm5703: Fix missing n_voltages for fixed regulators
regulator: fan53555: Fix wrong TCS_SLEW_MASK
regulator: fan53555: Explicitly include bits header
Because of the logic in place, SW_HUGE_PACKET can never be set.
(If the first condition is true, then the 2nd one is also true, but is not
executed)
Change the logic and update each bit individually.
Fixes: 29d1e85f45e0 ("net: dsa: microchip: ksz8: add MTU configuration support")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/43107d9e8b5b8b05f0cbd4e1f47a2bb88c8747b2.1681755535.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
With CONFIG_INIT_STACK_ALL_ZERO enabled, bindgen passes
-ftrivial-auto-var-init=zero to clang, that triggers the following
error:
error: '-ftrivial-auto-var-init=zero' hasn't been enabled; enable it at your own peril for benchmarking purpose only with '-enable-trivial-auto-var-init-zero-knowing-it-will-be-removed-from-clang'
However, this additional option that is currently required by clang is
deprecated since clang-16 and going to be removed in the future,
likely with clang-18.
So, make sure bindgen is using this extra option if the major version of
the libclang used by bindgen is < 16.
In this way we can enable CONFIG_INIT_STACK_ALL_ZERO with CONFIG_RUST
without triggering any build error.
Link: https://github.com/llvm/llvm-project/issues/44842
Link: https://github.com/llvm/llvm-project/blob/llvmorg-16.0.0-rc2/clang/docs/ReleaseNotes.rst#deprecated-compiler-flags
Signed-off-by: Andrea Righi <andrea.righi@canonical.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
[Changed to < 16, added link and reworded]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
nm can use "R" or "r" to show read-only data sections, but
scripts/is_rust_module.sh can only recognize "r", so with some versions
of binutils it can fail to detect if a module is a Rust module or not.
Right now we're using this script only to determine if we need to skip
BTF generation (that is disabled globally if CONFIG_RUST is enabled),
but it's still nice to fix this script to do the proper job.
Moreover, with this patch applied I can also relax the constraint of
"RUST depends on !DEBUG_INFO_BTF" and build a kernel with Rust and BTF
enabled at the same time (of course BTF generation is still skipped for
Rust modules).
[ Miguel: The actual reason is likely to be a change on the Rust
compiler between 1.61.0 and 1.62.0:
echo '#[used] static S: () = ();' |
rustup run 1.61.0 rustc --emit=obj --crate-type=lib - &&
nm rust_out.o
echo '#[used] static S: () = ();' |
rustup run 1.62.0 rustc --emit=obj --crate-type=lib - &&
nm rust_out.o
Gives:
0000000000000000 r _ZN8rust_out1S17h48027ce0da975467E
0000000000000000 R _ZN8rust_out1S17h58e1f3d9c0e97cefE
See https://godbolt.org/z/KE6jneoo4. ]
Signed-off-by: Andrea Righi <andrea.righi@canonical.com>
Reviewed-by: Vincenzo Palazzo <vincenzopalazzodev@gmail.com>
Reviewed-by: Eric Curtin <ecurtin@redhat.com>
Reviewed-by: Martin Rodriguez Reboredo <yakoyoku@gmail.com>
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Juan Jose et al reported an issue found via fuzzing where the verifier's
pruning logic prematurely marks a program path as safe.
Consider the following program:
0: (b7) r6 = 1024
1: (b7) r7 = 0
2: (b7) r8 = 0
3: (b7) r9 = -2147483648
4: (97) r6 %= 1025
5: (05) goto pc+0
6: (bd) if r6 <= r9 goto pc+2
7: (97) r6 %= 1
8: (b7) r9 = 0
9: (bd) if r6 <= r9 goto pc+1
10: (b7) r6 = 0
11: (b7) r0 = 0
12: (63) *(u32 *)(r10 -4) = r0
13: (18) r4 = 0xffff888103693400 // map_ptr(ks=4,vs=48)
15: (bf) r1 = r4
16: (bf) r2 = r10
17: (07) r2 += -4
18: (85) call bpf_map_lookup_elem#1
19: (55) if r0 != 0x0 goto pc+1
20: (95) exit
21: (77) r6 >>= 10
22: (27) r6 *= 8192
23: (bf) r1 = r0
24: (0f) r0 += r6
25: (79) r3 = *(u64 *)(r0 +0)
26: (7b) *(u64 *)(r1 +0) = r3
27: (95) exit
The verifier treats this as safe, leading to oob read/write access due
to an incorrect verifier conclusion:
func#0 @0
0: R1=ctx(off=0,imm=0) R10=fp0
0: (b7) r6 = 1024 ; R6_w=1024
1: (b7) r7 = 0 ; R7_w=0
2: (b7) r8 = 0 ; R8_w=0
3: (b7) r9 = -2147483648 ; R9_w=-2147483648
4: (97) r6 %= 1025 ; R6_w=scalar()
5: (05) goto pc+0
6: (bd) if r6 <= r9 goto pc+2 ; R6_w=scalar(umin=18446744071562067969,var_off=(0xffffffff00000000; 0xffffffff)) R9_w=-2147483648
7: (97) r6 %= 1 ; R6_w=scalar()
8: (b7) r9 = 0 ; R9=0
9: (bd) if r6 <= r9 goto pc+1 ; R6=scalar(umin=1) R9=0
10: (b7) r6 = 0 ; R6_w=0
11: (b7) r0 = 0 ; R0_w=0
12: (63) *(u32 *)(r10 -4) = r0
last_idx 12 first_idx 9
regs=1 stack=0 before 11: (b7) r0 = 0
13: R0_w=0 R10=fp0 fp-8=0000????
13: (18) r4 = 0xffff8ad3886c2a00 ; R4_w=map_ptr(off=0,ks=4,vs=48,imm=0)
15: (bf) r1 = r4 ; R1_w=map_ptr(off=0,ks=4,vs=48,imm=0) R4_w=map_ptr(off=0,ks=4,vs=48,imm=0)
16: (bf) r2 = r10 ; R2_w=fp0 R10=fp0
17: (07) r2 += -4 ; R2_w=fp-4
18: (85) call bpf_map_lookup_elem#1 ; R0=map_value_or_null(id=1,off=0,ks=4,vs=48,imm=0)
19: (55) if r0 != 0x0 goto pc+1 ; R0=0
20: (95) exit
from 19 to 21: R0=map_value(off=0,ks=4,vs=48,imm=0) R6=0 R7=0 R8=0 R9=0 R10=fp0 fp-8=mmmm????
21: (77) r6 >>= 10 ; R6_w=0
22: (27) r6 *= 8192 ; R6_w=0
23: (bf) r1 = r0 ; R0=map_value(off=0,ks=4,vs=48,imm=0) R1_w=map_value(off=0,ks=4,vs=48,imm=0)
24: (0f) r0 += r6
last_idx 24 first_idx 19
regs=40 stack=0 before 23: (bf) r1 = r0
regs=40 stack=0 before 22: (27) r6 *= 8192
regs=40 stack=0 before 21: (77) r6 >>= 10
regs=40 stack=0 before 19: (55) if r0 != 0x0 goto pc+1
parent didn't have regs=40 stack=0 marks: R0_rw=map_value_or_null(id=1,off=0,ks=4,vs=48,imm=0) R6_rw=P0 R7=0 R8=0 R9=0 R10=fp0 fp-8=mmmm????
last_idx 18 first_idx 9
regs=40 stack=0 before 18: (85) call bpf_map_lookup_elem#1
regs=40 stack=0 before 17: (07) r2 += -4
regs=40 stack=0 before 16: (bf) r2 = r10
regs=40 stack=0 before 15: (bf) r1 = r4
regs=40 stack=0 before 13: (18) r4 = 0xffff8ad3886c2a00
regs=40 stack=0 before 12: (63) *(u32 *)(r10 -4) = r0
regs=40 stack=0 before 11: (b7) r0 = 0
regs=40 stack=0 before 10: (b7) r6 = 0
25: (79) r3 = *(u64 *)(r0 +0) ; R0_w=map_value(off=0,ks=4,vs=48,imm=0) R3_w=scalar()
26: (7b) *(u64 *)(r1 +0) = r3 ; R1_w=map_value(off=0,ks=4,vs=48,imm=0) R3_w=scalar()
27: (95) exit
from 9 to 11: R1=ctx(off=0,imm=0) R6=0 R7=0 R8=0 R9=0 R10=fp0
11: (b7) r0 = 0 ; R0_w=0
12: (63) *(u32 *)(r10 -4) = r0
last_idx 12 first_idx 11
regs=1 stack=0 before 11: (b7) r0 = 0
13: R0_w=0 R10=fp0 fp-8=0000????
13: (18) r4 = 0xffff8ad3886c2a00 ; R4_w=map_ptr(off=0,ks=4,vs=48,imm=0)
15: (bf) r1 = r4 ; R1_w=map_ptr(off=0,ks=4,vs=48,imm=0) R4_w=map_ptr(off=0,ks=4,vs=48,imm=0)
16: (bf) r2 = r10 ; R2_w=fp0 R10=fp0
17: (07) r2 += -4 ; R2_w=fp-4
18: (85) call bpf_map_lookup_elem#1
frame 0: propagating r6
last_idx 19 first_idx 11
regs=40 stack=0 before 18: (85) call bpf_map_lookup_elem#1
regs=40 stack=0 before 17: (07) r2 += -4
regs=40 stack=0 before 16: (bf) r2 = r10
regs=40 stack=0 before 15: (bf) r1 = r4
regs=40 stack=0 before 13: (18) r4 = 0xffff8ad3886c2a00
regs=40 stack=0 before 12: (63) *(u32 *)(r10 -4) = r0
regs=40 stack=0 before 11: (b7) r0 = 0
parent didn't have regs=40 stack=0 marks: R1=ctx(off=0,imm=0) R6_r=P0 R7=0 R8=0 R9=0 R10=fp0
last_idx 9 first_idx 9
regs=40 stack=0 before 9: (bd) if r6 <= r9 goto pc+1
parent didn't have regs=40 stack=0 marks: R1=ctx(off=0,imm=0) R6_rw=Pscalar() R7_w=0 R8_w=0 R9_rw=0 R10=fp0
last_idx 8 first_idx 0
regs=40 stack=0 before 8: (b7) r9 = 0
regs=40 stack=0 before 7: (97) r6 %= 1
regs=40 stack=0 before 6: (bd) if r6 <= r9 goto pc+2
regs=40 stack=0 before 5: (05) goto pc+0
regs=40 stack=0 before 4: (97) r6 %= 1025
regs=40 stack=0 before 3: (b7) r9 = -2147483648
regs=40 stack=0 before 2: (b7) r8 = 0
regs=40 stack=0 before 1: (b7) r7 = 0
regs=40 stack=0 before 0: (b7) r6 = 1024
19: safe
frame 0: propagating r6
last_idx 9 first_idx 0
regs=40 stack=0 before 6: (bd) if r6 <= r9 goto pc+2
regs=40 stack=0 before 5: (05) goto pc+0
regs=40 stack=0 before 4: (97) r6 %= 1025
regs=40 stack=0 before 3: (b7) r9 = -2147483648
regs=40 stack=0 before 2: (b7) r8 = 0
regs=40 stack=0 before 1: (b7) r7 = 0
regs=40 stack=0 before 0: (b7) r6 = 1024
from 6 to 9: safe
verification time 110 usec
stack depth 4
processed 36 insns (limit 1000000) max_states_per_insn 0 total_states 3 peak_states 3 mark_read 2
The verifier considers this program as safe by mistakenly pruning unsafe
code paths. In the above func#0, code lines 0-10 are of interest. In line
0-3 registers r6 to r9 are initialized with known scalar values. In line 4
the register r6 is reset to an unknown scalar given the verifier does not
track modulo operations. Due to this, the verifier can also not determine
precisely which branches in line 6 and 9 are taken, therefore it needs to
explore them both.
As can be seen, the verifier starts with exploring the false/fall-through
paths first. The 'from 19 to 21' path has both r6=0 and r9=0 and the pointer
arithmetic on r0 += r6 is therefore considered safe. Given the arithmetic,
r6 is correctly marked for precision tracking where backtracking kicks in
where it walks back the current path all the way where r6 was set to 0 in
the fall-through branch.
Next, the pruning logics pops the path 'from 9 to 11' from the stack. Also
here, the state of the registers is the same, that is, r6=0 and r9=0, so
that at line 19 the path can be pruned as it is considered safe. It is
interesting to note that the conditional in line 9 turned r6 into a more
precise state, that is, in the fall-through path at the beginning of line
10, it is R6=scalar(umin=1), and in the branch-taken path (which is analyzed
here) at the beginning of line 11, r6 turned into a known const r6=0 as
r9=0 prior to that and therefore (unsigned) r6 <= 0 concludes that r6 must
be 0 (**):
[...] ; R6_w=scalar()
9: (bd) if r6 <= r9 goto pc+1 ; R6=scalar(umin=1) R9=0
[...]
from 9 to 11: R1=ctx(off=0,imm=0) R6=0 R7=0 R8=0 R9=0 R10=fp0
[...]
The next path is 'from 6 to 9'. The verifier considers the old and current
state equivalent, and therefore prunes the search incorrectly. Looking into
the two states which are being compared by the pruning logic at line 9, the
old state consists of R6_rwD=Pscalar() R9_rwD=0 R10=fp0 and the new state
consists of R1=ctx(off=0,imm=0) R6_w=scalar(umax=18446744071562067968)
R7_w=0 R8_w=0 R9_w=-2147483648 R10=fp0. While r6 had the reg->precise flag
correctly set in the old state, r9 did not. Both r6'es are considered as
equivalent given the old one is a superset of the current, more precise one,
however, r9's actual values (0 vs 0x80000000) mismatch. Given the old r9
did not have reg->precise flag set, the verifier does not consider the
register as contributing to the precision state of r6, and therefore it
considered both r9 states as equivalent. However, for this specific pruned
path (which is also the actual path taken at runtime), register r6 will be
0x400 and r9 0x80000000 when reaching line 21, thus oob-accessing the map.
The purpose of precision tracking is to initially mark registers (including
spilled ones) as imprecise to help verifier's pruning logic finding equivalent
states it can then prune if they don't contribute to the program's safety
aspects. For example, if registers are used for pointer arithmetic or to pass
constant length to a helper, then the verifier sets reg->precise flag and
backtracks the BPF program instruction sequence and chain of verifier states
to ensure that the given register or stack slot including their dependencies
are marked as precisely tracked scalar. This also includes any other registers
and slots that contribute to a tracked state of given registers/stack slot.
This backtracking relies on recorded jmp_history and is able to traverse
entire chain of parent states. This process ends only when all the necessary
registers/slots and their transitive dependencies are marked as precise.
The backtrack_insn() is called from the current instruction up to the first
instruction, and its purpose is to compute a bitmask of registers and stack
slots that need precision tracking in the parent's verifier state. For example,
if a current instruction is r6 = r7, then r6 needs precision after this
instruction and r7 needs precision before this instruction, that is, in the
parent state. Hence for the latter r7 is marked and r6 unmarked.
For the class of jmp/jmp32 instructions, backtrack_insn() today only looks
at call and exit instructions and for all other conditionals the masks
remain as-is. However, in the given situation register r6 has a dependency
on r9 (as described above in **), so also that one needs to be marked for
precision tracking. In other words, if an imprecise register influences a
precise one, then the imprecise register should also be marked precise.
Meaning, in the parent state both dest and src register need to be tracked
for precision and therefore the marking must be more conservative by setting
reg->precise flag for both. The precision propagation needs to cover both
for the conditional: if the src reg was marked but not the dst reg and vice
versa.
After the fix the program is correctly rejected:
func#0 @0
0: R1=ctx(off=0,imm=0) R10=fp0
0: (b7) r6 = 1024 ; R6_w=1024
1: (b7) r7 = 0 ; R7_w=0
2: (b7) r8 = 0 ; R8_w=0
3: (b7) r9 = -2147483648 ; R9_w=-2147483648
4: (97) r6 %= 1025 ; R6_w=scalar()
5: (05) goto pc+0
6: (bd) if r6 <= r9 goto pc+2 ; R6_w=scalar(umin=18446744071562067969,var_off=(0xffffffff80000000; 0x7fffffff),u32_min=-2147483648) R9_w=-2147483648
7: (97) r6 %= 1 ; R6_w=scalar()
8: (b7) r9 = 0 ; R9=0
9: (bd) if r6 <= r9 goto pc+1 ; R6=scalar(umin=1) R9=0
10: (b7) r6 = 0 ; R6_w=0
11: (b7) r0 = 0 ; R0_w=0
12: (63) *(u32 *)(r10 -4) = r0
last_idx 12 first_idx 9
regs=1 stack=0 before 11: (b7) r0 = 0
13: R0_w=0 R10=fp0 fp-8=0000????
13: (18) r4 = 0xffff9290dc5bfe00 ; R4_w=map_ptr(off=0,ks=4,vs=48,imm=0)
15: (bf) r1 = r4 ; R1_w=map_ptr(off=0,ks=4,vs=48,imm=0) R4_w=map_ptr(off=0,ks=4,vs=48,imm=0)
16: (bf) r2 = r10 ; R2_w=fp0 R10=fp0
17: (07) r2 += -4 ; R2_w=fp-4
18: (85) call bpf_map_lookup_elem#1 ; R0=map_value_or_null(id=1,off=0,ks=4,vs=48,imm=0)
19: (55) if r0 != 0x0 goto pc+1 ; R0=0
20: (95) exit
from 19 to 21: R0=map_value(off=0,ks=4,vs=48,imm=0) R6=0 R7=0 R8=0 R9=0 R10=fp0 fp-8=mmmm????
21: (77) r6 >>= 10 ; R6_w=0
22: (27) r6 *= 8192 ; R6_w=0
23: (bf) r1 = r0 ; R0=map_value(off=0,ks=4,vs=48,imm=0) R1_w=map_value(off=0,ks=4,vs=48,imm=0)
24: (0f) r0 += r6
last_idx 24 first_idx 19
regs=40 stack=0 before 23: (bf) r1 = r0
regs=40 stack=0 before 22: (27) r6 *= 8192
regs=40 stack=0 before 21: (77) r6 >>= 10
regs=40 stack=0 before 19: (55) if r0 != 0x0 goto pc+1
parent didn't have regs=40 stack=0 marks: R0_rw=map_value_or_null(id=1,off=0,ks=4,vs=48,imm=0) R6_rw=P0 R7=0 R8=0 R9=0 R10=fp0 fp-8=mmmm????
last_idx 18 first_idx 9
regs=40 stack=0 before 18: (85) call bpf_map_lookup_elem#1
regs=40 stack=0 before 17: (07) r2 += -4
regs=40 stack=0 before 16: (bf) r2 = r10
regs=40 stack=0 before 15: (bf) r1 = r4
regs=40 stack=0 before 13: (18) r4 = 0xffff9290dc5bfe00
regs=40 stack=0 before 12: (63) *(u32 *)(r10 -4) = r0
regs=40 stack=0 before 11: (b7) r0 = 0
regs=40 stack=0 before 10: (b7) r6 = 0
25: (79) r3 = *(u64 *)(r0 +0) ; R0_w=map_value(off=0,ks=4,vs=48,imm=0) R3_w=scalar()
26: (7b) *(u64 *)(r1 +0) = r3 ; R1_w=map_value(off=0,ks=4,vs=48,imm=0) R3_w=scalar()
27: (95) exit
from 9 to 11: R1=ctx(off=0,imm=0) R6=0 R7=0 R8=0 R9=0 R10=fp0
11: (b7) r0 = 0 ; R0_w=0
12: (63) *(u32 *)(r10 -4) = r0
last_idx 12 first_idx 11
regs=1 stack=0 before 11: (b7) r0 = 0
13: R0_w=0 R10=fp0 fp-8=0000????
13: (18) r4 = 0xffff9290dc5bfe00 ; R4_w=map_ptr(off=0,ks=4,vs=48,imm=0)
15: (bf) r1 = r4 ; R1_w=map_ptr(off=0,ks=4,vs=48,imm=0) R4_w=map_ptr(off=0,ks=4,vs=48,imm=0)
16: (bf) r2 = r10 ; R2_w=fp0 R10=fp0
17: (07) r2 += -4 ; R2_w=fp-4
18: (85) call bpf_map_lookup_elem#1
frame 0: propagating r6
last_idx 19 first_idx 11
regs=40 stack=0 before 18: (85) call bpf_map_lookup_elem#1
regs=40 stack=0 before 17: (07) r2 += -4
regs=40 stack=0 before 16: (bf) r2 = r10
regs=40 stack=0 before 15: (bf) r1 = r4
regs=40 stack=0 before 13: (18) r4 = 0xffff9290dc5bfe00
regs=40 stack=0 before 12: (63) *(u32 *)(r10 -4) = r0
regs=40 stack=0 before 11: (b7) r0 = 0
parent didn't have regs=40 stack=0 marks: R1=ctx(off=0,imm=0) R6_r=P0 R7=0 R8=0 R9=0 R10=fp0
last_idx 9 first_idx 9
regs=40 stack=0 before 9: (bd) if r6 <= r9 goto pc+1
parent didn't have regs=240 stack=0 marks: R1=ctx(off=0,imm=0) R6_rw=Pscalar() R7_w=0 R8_w=0 R9_rw=P0 R10=fp0
last_idx 8 first_idx 0
regs=240 stack=0 before 8: (b7) r9 = 0
regs=40 stack=0 before 7: (97) r6 %= 1
regs=40 stack=0 before 6: (bd) if r6 <= r9 goto pc+2
regs=240 stack=0 before 5: (05) goto pc+0
regs=240 stack=0 before 4: (97) r6 %= 1025
regs=240 stack=0 before 3: (b7) r9 = -2147483648
regs=40 stack=0 before 2: (b7) r8 = 0
regs=40 stack=0 before 1: (b7) r7 = 0
regs=40 stack=0 before 0: (b7) r6 = 1024
19: safe
from 6 to 9: R1=ctx(off=0,imm=0) R6_w=scalar(umax=18446744071562067968) R7_w=0 R8_w=0 R9_w=-2147483648 R10=fp0
9: (bd) if r6 <= r9 goto pc+1
last_idx 9 first_idx 0
regs=40 stack=0 before 6: (bd) if r6 <= r9 goto pc+2
regs=240 stack=0 before 5: (05) goto pc+0
regs=240 stack=0 before 4: (97) r6 %= 1025
regs=240 stack=0 before 3: (b7) r9 = -2147483648
regs=40 stack=0 before 2: (b7) r8 = 0
regs=40 stack=0 before 1: (b7) r7 = 0
regs=40 stack=0 before 0: (b7) r6 = 1024
last_idx 9 first_idx 0
regs=200 stack=0 before 6: (bd) if r6 <= r9 goto pc+2
regs=240 stack=0 before 5: (05) goto pc+0
regs=240 stack=0 before 4: (97) r6 %= 1025
regs=240 stack=0 before 3: (b7) r9 = -2147483648
regs=40 stack=0 before 2: (b7) r8 = 0
regs=40 stack=0 before 1: (b7) r7 = 0
regs=40 stack=0 before 0: (b7) r6 = 1024
11: R6=scalar(umax=18446744071562067968) R9=-2147483648
11: (b7) r0 = 0 ; R0_w=0
12: (63) *(u32 *)(r10 -4) = r0
last_idx 12 first_idx 11
regs=1 stack=0 before 11: (b7) r0 = 0
13: R0_w=0 R10=fp0 fp-8=0000????
13: (18) r4 = 0xffff9290dc5bfe00 ; R4_w=map_ptr(off=0,ks=4,vs=48,imm=0)
15: (bf) r1 = r4 ; R1_w=map_ptr(off=0,ks=4,vs=48,imm=0) R4_w=map_ptr(off=0,ks=4,vs=48,imm=0)
16: (bf) r2 = r10 ; R2_w=fp0 R10=fp0
17: (07) r2 += -4 ; R2_w=fp-4
18: (85) call bpf_map_lookup_elem#1 ; R0_w=map_value_or_null(id=3,off=0,ks=4,vs=48,imm=0)
19: (55) if r0 != 0x0 goto pc+1 ; R0_w=0
20: (95) exit
from 19 to 21: R0=map_value(off=0,ks=4,vs=48,imm=0) R6=scalar(umax=18446744071562067968) R7=0 R8=0 R9=-2147483648 R10=fp0 fp-8=mmmm????
21: (77) r6 >>= 10 ; R6_w=scalar(umax=18014398507384832,var_off=(0x0; 0x3fffffffffffff))
22: (27) r6 *= 8192 ; R6_w=scalar(smax=9223372036854767616,umax=18446744073709543424,var_off=(0x0; 0xffffffffffffe000),s32_max=2147475456,u32_max=-8192)
23: (bf) r1 = r0 ; R0=map_value(off=0,ks=4,vs=48,imm=0) R1_w=map_value(off=0,ks=4,vs=48,imm=0)
24: (0f) r0 += r6
last_idx 24 first_idx 21
regs=40 stack=0 before 23: (bf) r1 = r0
regs=40 stack=0 before 22: (27) r6 *= 8192
regs=40 stack=0 before 21: (77) r6 >>= 10
parent didn't have regs=40 stack=0 marks: R0_rw=map_value(off=0,ks=4,vs=48,imm=0) R6_r=Pscalar(umax=18446744071562067968) R7=0 R8=0 R9=-2147483648 R10=fp0 fp-8=mmmm????
last_idx 19 first_idx 11
regs=40 stack=0 before 19: (55) if r0 != 0x0 goto pc+1
regs=40 stack=0 before 18: (85) call bpf_map_lookup_elem#1
regs=40 stack=0 before 17: (07) r2 += -4
regs=40 stack=0 before 16: (bf) r2 = r10
regs=40 stack=0 before 15: (bf) r1 = r4
regs=40 stack=0 before 13: (18) r4 = 0xffff9290dc5bfe00
regs=40 stack=0 before 12: (63) *(u32 *)(r10 -4) = r0
regs=40 stack=0 before 11: (b7) r0 = 0
parent didn't have regs=40 stack=0 marks: R1=ctx(off=0,imm=0) R6_rw=Pscalar(umax=18446744071562067968) R7_w=0 R8_w=0 R9_w=-2147483648 R10=fp0
last_idx 9 first_idx 0
regs=40 stack=0 before 9: (bd) if r6 <= r9 goto pc+1
regs=240 stack=0 before 6: (bd) if r6 <= r9 goto pc+2
regs=240 stack=0 before 5: (05) goto pc+0
regs=240 stack=0 before 4: (97) r6 %= 1025
regs=240 stack=0 before 3: (b7) r9 = -2147483648
regs=40 stack=0 before 2: (b7) r8 = 0
regs=40 stack=0 before 1: (b7) r7 = 0
regs=40 stack=0 before 0: (b7) r6 = 1024
math between map_value pointer and register with unbounded min value is not allowed
verification time 886 usec
stack depth 4
processed 49 insns (limit 1000000) max_states_per_insn 1 total_states 5 peak_states 5 mark_read 2
Fixes: b5dc0163d8fd ("bpf: precise scalar_value tracking")
Reported-by: Juan Jose Lopez Jaimez <jjlopezjaimez@google.com>
Reported-by: Meador Inge <meadori@google.com>
Reported-by: Simon Scannell <simonscannell@google.com>
Reported-by: Nenad Stojanovski <thenenadx@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Co-developed-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: John Fastabend <john.fastabend@gmail.com>
Reviewed-by: Juan Jose Lopez Jaimez <jjlopezjaimez@google.com>
Reviewed-by: Meador Inge <meadori@google.com>
Reviewed-by: Simon Scannell <simonscannell@google.com>
The KVM_REG_SIZE() comes from the ioctl and it can be a power of two
between 0-32768 but if it is more than sizeof(long) this will corrupt
memory.
Fixes: 99adb567632b ("KVM: arm/arm64: Add save/restore support for firmware workaround state")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Steven Price <steven.price@arm.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/4efbab8c-640f-43b2-8ac6-6d68e08280fe@kili.mountain
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
- Address two issues with the new GSS krb5 Kunit tests
-----BEGIN PGP SIGNATURE-----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=a/Wj
-----END PGP SIGNATURE-----
Merge tag 'nfsd-6.3-6' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux
Pull nfsd fixes from Chuck Lever:
- Address two issues with the new GSS krb5 Kunit tests
* tag 'nfsd-6.3-6' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux:
SUNRPC: Fix failures of checksum Kunit tests
sunrpc: Fix RFC6803 encryption test
-----BEGIN PGP SIGNATURE-----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=u/0j
-----END PGP SIGNATURE-----
Merge tag 'loongarch-fixes-6.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson
Pull LoongArch fixes from Huacai Chen:
"Some bug fixes, some build fixes, a comment fix and a trivial cleanup"
* tag 'loongarch-fixes-6.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson:
tools/loongarch: Use __SIZEOF_LONG__ to define __BITS_PER_LONG
LoongArch: Replace hard-coded values in comments with VALEN
LoongArch: Clean up plat_swiotlb_setup() related code
LoongArch: Check unwind_error() in arch_stack_walk()
LoongArch: Adjust user_regset_copyin parameter to the correct offset
LoongArch: Adjust user_watch_state for explicit alignment
LoongArch: module: set section addresses to 0x0
LoongArch: Mark 3 symbol exports as non-GPL
LoongArch: Enable PG when wakeup from suspend
LoongArch: Fix _CONST64_(x) as unsigned
LoongArch: Fix build error if CONFIG_SUSPEND is not set
LoongArch: Fix probing of the CRC32 feature
LoongArch: Make WriteCombine configurable for ioremap()
If devm_request_irq() fails, then we are directly return 'ret' without
clk_disable_unprepare(sfc->clk) and clk_disable_unprepare(sfc->hclk).
Fix this by changing direct return to a goto 'err_irq'.
Fixes: 0b89fc0a367e ("spi: rockchip-sfc: add rockchip serial flash controller")
Signed-off-by: Li Lanzhe <u202212060@hust.edu.cn>
Reviewed-by: Dongliang Mu <dzm91@hust.edu.cn>
Link: https://lore.kernel.org/r/20230419115030.6029-1-u202212060@hust.edu.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
dma_request_slave_channel() may return NULL which will lead to
NULL pointer dereference error in 'tmp_chan->private'.
Correct this behaviour by, first, switching from deprecated function
dma_request_slave_channel() to dma_request_chan(). Secondly, enable
sanity check for the resuling value of dma_request_chan().
Also, fix description that follows the enacted changes and that
concerns the use of dma_request_slave_channel().
Fixes: 706e2c881158 ("ASoC: fsl_asrc_dma: Reuse the dma channel if available in Back-End")
Co-developed-by: Natalia Petrova <n.petrova@fintech.ru>
Signed-off-by: Nikita Zhandarovich <n.zhandarovich@fintech.ru>
Acked-by: Shengjiu Wang <shengjiu.wang@gmail.com>
Link: https://lore.kernel.org/r/20230417133242.53339-1-n.zhandarovich@fintech.ru
Signed-off-by: Mark Brown <broonie@kernel.org>
SAI on i.MX8QM platform supports the data lines up to 4. So the pins
setting should be corrected to 4.
Fixes: eba0f0077519 ("ASoC: fsl_sai: Enable combine mode soft")
Signed-off-by: Chancel Liu <chancel.liu@nxp.com>
Acked-by: Shengjiu Wang <shengjiu.wang@gmail.com>
Reviewed-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Link: https://lore.kernel.org/r/20230418094259.4150771-1-chancel.liu@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
It looks like the dependency got added accidentally in commit a553260618d8
("[PATCH] ISA DMA Kconfig fixes - part 3"). Unlike the previously removed
dmascc driver, the scc driver never used DMA.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
During initialization the driver issues a reset command via its command
interface in order to remove previous configuration from the device.
After issuing the reset, the driver waits for 200ms before polling on
the "system_status" register using memory-mapped IO until the device
reaches a ready state (0x5E). The wait is necessary because the reset
command only triggers the reset, but the reset itself happens
asynchronously. If the driver starts polling too soon, the read of the
"system_status" register will never return and the system will crash
[1].
The issue was discovered when the device was flashed with a development
firmware version where the reset routine took longer to complete. The
issue was fixed in the firmware, but it exposed the fact that the
current wait time is borderline.
Fix by increasing the wait time from 200ms to 400ms. With this patch and
the buggy firmware version, the issue did not reproduce in 10 reboots
whereas without the patch the issue is reproduced quite consistently.
[1]
mce: CPUs not responding to MCE broadcast (may include false positives): 0,4
mce: CPUs not responding to MCE broadcast (may include false positives): 0,4
Kernel panic - not syncing: Timeout: Not all CPUs entered broadcast exception handler
Shutting down cpus with NMI
Kernel Offset: 0x12000000 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffffbfffffff)
Fixes: ac004e84164e ("mlxsw: pci: Wait longer before accessing the device after reset")
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Unfortunately, the tester gave a weak feedback (working/non-working) for
this case. After the double confirmation, this change is not really required.
The standard code with alc269_fallback_pin_fixup_tbl should work on this
hardware.
Fixes: 5911d78fabbb ("ALSA: hda/realtek: Improve support for Dell Precision 3260")
Fixes: 5f4efc9dfcfd ("ALSA: hda/realtek: Fix support for Dell Precision 3260")
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20230419081121.304846-1-perex@perex.cz
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Matthieu Baerts says:
====================
mptcp: fixes around listening sockets and the MPTCP worker
Christoph Paasch reported a couple of issues found by syzkaller and
linked to operations done by the MPTCP worker on (un)accepted sockets.
Fixing these issues was not obvious and rather complex but Paolo Abeni
nicely managed to propose these excellent patches that seem to satisfy
syzkaller.
Patch 1 partially reverts a recent fix but while still providing a
solution for the previous issue, it also prevents the MPTCP worker from
running concurrently with inet_csk_listen_stop(). A warning is then
avoided. The partially reverted patch has been introduced in v6.3-rc3,
backported up to v6.1 and fixing an issue visible from v5.18.
Patch 2 prevents the MPTCP worker to race with mptcp_accept() causing a
UaF when a fallback to TCP is done while in parallel, the socket is
being accepted by the userspace. This is also a fix of a previous fix
introduced in v6.3-rc3, backported up to v6.1 but here fixing an issue
that is in theory there from v5.7. There is no need to backport it up
to here as it looks like it is only visible later, around v5.18, see the
previous cover-letter linked to this original fix.
====================
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
This patch fixes a missing 8 byte for the header size calculation. The
ipv6_rpl_srh_size() is used to check a skb_pull() on skb->data which
points to skb_transport_header(). Currently we only check on the
calculated addresses fields using CmprI and CmprE fields, see:
https://www.rfc-editor.org/rfc/rfc6554#section-3
there is however a missing 8 byte inside the calculation which stands
for the fields before the addresses field. Those 8 bytes are represented
by sizeof(struct ipv6_rpl_sr_hdr) expression.
Fixes: 8610c7c6e3bd ("net: ipv6: add support for rpl sr exthdr")
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Reported-by: maxpl0it <maxpl0it@protonmail.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
When vmxnet3_rq_create() fails to allocate rq->data_ring.base due to page
allocation failure, subsequent call to vmxnet3_rq_rx_complete() can result in
NULL pointer dereference.
To fix this bug, check not only that rxDataRingUsed is true but also that
adapter->rxdataring_enabled is true before calling memcpy() in
vmxnet3_rq_rx_complete().
[1728352.477993] ethtool: page allocation failure: order:9, mode:0x6000c0(GFP_KERNEL), nodemask=(null),cpuset=/,mems_allowed=0
...
[1728352.478009] Call Trace:
[1728352.478028] dump_stack+0x41/0x60
[1728352.478035] warn_alloc.cold.120+0x7b/0x11b
[1728352.478038] ? _cond_resched+0x15/0x30
[1728352.478042] ? __alloc_pages_direct_compact+0x15f/0x170
[1728352.478043] __alloc_pages_slowpath+0xcd3/0xd10
[1728352.478047] __alloc_pages_nodemask+0x2e2/0x320
[1728352.478049] __dma_direct_alloc_pages.constprop.25+0x8a/0x120
[1728352.478053] dma_direct_alloc+0x5a/0x2a0
[1728352.478056] vmxnet3_rq_create.part.57+0x17c/0x1f0 [vmxnet3]
...
[1728352.478188] vmxnet3 0000:0b:00.0 ens192: rx data ring will be disabled
...
[1728352.515347] BUG: unable to handle kernel NULL pointer dereference at 0000000000000034
...
[1728352.515440] RIP: 0010:memcpy_orig+0x54/0x130
...
[1728352.515655] Call Trace:
[1728352.515665] <IRQ>
[1728352.515672] vmxnet3_rq_rx_complete+0x419/0xef0 [vmxnet3]
[1728352.515690] vmxnet3_poll_rx_only+0x31/0xa0 [vmxnet3]
...
Signed-off-by: Seiji Nishikawa <snishika@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When a net device is put administratively up, its 'IFF_UP' flag is set
(if not set already) and a 'NETDEV_UP' notification is emitted, which
causes the 8021q driver to add VLAN ID 0 on the device. The reverse
happens when a net device is put administratively down.
When changing the type of a bond to Ethernet, its 'IFF_UP' flag is
incorrectly cleared, resulting in the kernel skipping the above process
and VLAN ID 0 being leaked [1].
Fix by restoring the flag when changing the type to Ethernet, in a
similar fashion to the restoration of the 'IFF_SLAVE' flag.
The issue can be reproduced using the script in [2], with example out
before and after the fix in [3].
[1]
unreferenced object 0xffff888103479900 (size 256):
comm "ip", pid 329, jiffies 4294775225 (age 28.561s)
hex dump (first 32 bytes):
00 a0 0c 15 81 88 ff ff 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace:
[<ffffffff81a6051a>] kmalloc_trace+0x2a/0xe0
[<ffffffff8406426c>] vlan_vid_add+0x30c/0x790
[<ffffffff84068e21>] vlan_device_event+0x1491/0x21a0
[<ffffffff81440c8e>] notifier_call_chain+0xbe/0x1f0
[<ffffffff8372383a>] call_netdevice_notifiers_info+0xba/0x150
[<ffffffff837590f2>] __dev_notify_flags+0x132/0x2e0
[<ffffffff8375ad9f>] dev_change_flags+0x11f/0x180
[<ffffffff8379af36>] do_setlink+0xb96/0x4060
[<ffffffff837adf6a>] __rtnl_newlink+0xc0a/0x18a0
[<ffffffff837aec6c>] rtnl_newlink+0x6c/0xa0
[<ffffffff837ac64e>] rtnetlink_rcv_msg+0x43e/0xe00
[<ffffffff839a99e0>] netlink_rcv_skb+0x170/0x440
[<ffffffff839a738f>] netlink_unicast+0x53f/0x810
[<ffffffff839a7fcb>] netlink_sendmsg+0x96b/0xe90
[<ffffffff8369d12f>] ____sys_sendmsg+0x30f/0xa70
[<ffffffff836a6d7a>] ___sys_sendmsg+0x13a/0x1e0
unreferenced object 0xffff88810f6a83e0 (size 32):
comm "ip", pid 329, jiffies 4294775225 (age 28.561s)
hex dump (first 32 bytes):
a0 99 47 03 81 88 ff ff a0 99 47 03 81 88 ff ff ..G.......G.....
81 00 00 00 01 00 00 00 cc cc cc cc cc cc cc cc ................
backtrace:
[<ffffffff81a6051a>] kmalloc_trace+0x2a/0xe0
[<ffffffff84064369>] vlan_vid_add+0x409/0x790
[<ffffffff84068e21>] vlan_device_event+0x1491/0x21a0
[<ffffffff81440c8e>] notifier_call_chain+0xbe/0x1f0
[<ffffffff8372383a>] call_netdevice_notifiers_info+0xba/0x150
[<ffffffff837590f2>] __dev_notify_flags+0x132/0x2e0
[<ffffffff8375ad9f>] dev_change_flags+0x11f/0x180
[<ffffffff8379af36>] do_setlink+0xb96/0x4060
[<ffffffff837adf6a>] __rtnl_newlink+0xc0a/0x18a0
[<ffffffff837aec6c>] rtnl_newlink+0x6c/0xa0
[<ffffffff837ac64e>] rtnetlink_rcv_msg+0x43e/0xe00
[<ffffffff839a99e0>] netlink_rcv_skb+0x170/0x440
[<ffffffff839a738f>] netlink_unicast+0x53f/0x810
[<ffffffff839a7fcb>] netlink_sendmsg+0x96b/0xe90
[<ffffffff8369d12f>] ____sys_sendmsg+0x30f/0xa70
[<ffffffff836a6d7a>] ___sys_sendmsg+0x13a/0x1e0
[2]
ip link add name t-nlmon type nlmon
ip link add name t-dummy type dummy
ip link add name t-bond type bond mode active-backup
ip link set dev t-bond up
ip link set dev t-nlmon master t-bond
ip link set dev t-nlmon nomaster
ip link show dev t-bond
ip link set dev t-dummy master t-bond
ip link show dev t-bond
ip link del dev t-bond
ip link del dev t-dummy
ip link del dev t-nlmon
[3]
Before:
12: t-bond: <NO-CARRIER,BROADCAST,MULTICAST,MASTER,UP> mtu 1500 qdisc noqueue state DOWN mode DEFAULT group default qlen 1000
link/netlink
12: t-bond: <BROADCAST,MULTICAST,MASTER,LOWER_UP> mtu 1500 qdisc noqueue state UP mode DEFAULT group default qlen 1000
link/ether 46:57:39:a4:46:a2 brd ff:ff:ff:ff:ff:ff
After:
12: t-bond: <NO-CARRIER,BROADCAST,MULTICAST,MASTER,UP> mtu 1500 qdisc noqueue state DOWN mode DEFAULT group default qlen 1000
link/netlink
12: t-bond: <BROADCAST,MULTICAST,MASTER,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP mode DEFAULT group default qlen 1000
link/ether 66:48:7b:74:b6:8a brd ff:ff:ff:ff:ff:ff
Fixes: e36b9d16c6a6 ("bonding: clean muticast addresses when device changes type")
Fixes: 75c78500ddad ("bonding: remap muticast addresses without using dev_close() and dev_open()")
Fixes: 9ec7eb60dcbc ("bonding: restore IFF_MASTER/SLAVE flags on bond enslave ether type change")
Reported-by: Mirsad Goran Todorovac <mirsad.todorovac@alu.unizg.hr>
Link: https://lore.kernel.org/netdev/78a8a03b-6070-3e6b-5042-f848dab16fb8@alu.unizg.hr/
Tested-by: Mirsad Goran Todorovac <mirsad.todorovac@alu.unizg.hr>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Acked-by: Jay Vosburgh <jay.vosburgh@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Although __SIZEOF_POINTER__ is equal to _SIZEOF_LONG__ on LoongArch,
it is better to use __SIZEOF_LONG__ to define __BITS_PER_LONG to keep
consistent between arch/loongarch/include/uapi/asm/bitsperlong.h and
tools/arch/loongarch/include/uapi/asm/bitsperlong.h.
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
After commit c78c43fe7d42 ("LoongArch: Use acpi_arch_dma_setup() and
remove ARCH_HAS_PHYS_TO_DMA"), plat_swiotlb_setup() has been deleted,
so clean up the related code.
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
We can see the following messages with CONFIG_PROVE_LOCKING=y on
LoongArch:
BUG: MAX_STACK_TRACE_ENTRIES too low!
turning off the locking correctness validator.
This is because stack_trace_save() returns a big value after call
arch_stack_walk(), here is the call trace:
save_trace()
stack_trace_save()
arch_stack_walk()
stack_trace_consume_entry()
arch_stack_walk() should return immediately if unwind_next_frame()
failed, no need to do the useless loops to increase the value of c->len
in stack_trace_consume_entry(), then we can fix the above problem.
Cc: stable@vger.kernel.org
Reported-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/all/8a44ad71-68d2-4926-892f-72bfc7a67e2a@roeck-us.net/
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Ensure that user_watch_state can be set correctly by the user.
Signed-off-by: Qing Zhang <zhangqing@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
This is done in order to easily calculate the number of breakpoints in
hw_break_get()/hw_break_set().
Signed-off-by: Qing Zhang <zhangqing@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
The following patchset contains Netfilter fixes for net:
1) Unbreak br_netfilter physdev match support, from Florian Westphal.
2) Use GFP_KERNEL_ACCOUNT for stateful/policy objects, from Chen Aotian.
3) Use IS_ENABLED() in nf_reset_trace(), from Florian Westphal.
4) Fix validation of catch-all set element.
5) Tighten requirements for catch-all set elements.
* git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
netfilter: nf_tables: tighten netlink attribute requirements for catch-all elements
netfilter: nf_tables: validate catch-all set elements
netfilter: nf_tables: fix ifdef to also consider nf_tables=m
netfilter: nf_tables: Modify nla_memdup's flag to GFP_KERNEL_ACCOUNT
netfilter: br_netfilter: fix recent physdev match breakage
====================
Link: https://lore.kernel.org/r/20230418145048.67270-1-pablo@netfilter.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reapply the fix from:
30b2b2196d6e ("cifs: do not include page data when checking signature")
that got lost in the iteratorisation of the cifs driver.
Fixes: d08089f649a0 ("cifs: Change the I/O paths to use an iterator rather than a page list")
Acked-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Reported-by: Paulo Alcantara <pc@manguebit.com>
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Paulo Alcantara <pc@cjr.nz>
cc: Shyam Prasad N <nspmangalore@gmail.com>
cc: Bharath S M <bharathsm@microsoft.com>
cc: Enzo Matsumiya <ematsumiya@suse.de>
cc: linux-cifs@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
If read() is done in an unbuffered manner, such that, say,
cifs_strict_readv() goes through cifs_user_readv() and thence
__cifs_readv(), it doesn't recognise the EOF and keeps indicating to
userspace that it returning full buffers of data.
This is due to ctx->iter being advanced in cifs_send_async_read() as the
buffer is split up amongst a number of rdata objects. The iterator count
is then used in collect_uncached_read_data() in the non-DIO case to set the
total length read - and thus the return value of sys_read(). But since the
iterator normally gets used up completely during splitting, ctx->total_len
gets overridden to the full amount.
However, prior to that in collect_uncached_read_data(), we've gone through
the list of rdatas and added up the amount of data we actually received
(which we then throw away).
Fix this by removing the bit that overrides the amount read in the non-DIO
case and just going with the total added up in the aforementioned loop.
This was observed by mounting a cifs share with multiple channels, e.g.:
mount //192.168.6.1/test /test/ -o user=shares,pass=...,max_channels=6
and then reading a 1MiB file on the share:
strace cat /xfstest.test/1M >/dev/null
Through strace, the same data can be seen being read again and again.
Fixes: d08089f649a0 ("cifs: Change the I/O paths to use an iterator rather than a page list")
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
cc: Jérôme Glisse <jglisse@redhat.com>
cc: Long Li <longli@microsoft.com>
cc: Enzo Matsumiya <ematsumiya@suse.de>
cc: Shyam Prasad N <nspmangalore@gmail.com>
cc: Rohith Surabattula <rohiths.msft@gmail.com>
cc: Jeff Layton <jlayton@kernel.org>
cc: linux-cifs@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
So Intel introduced the FSRS ("Fast Short REP STOS") CPU capability bit,
because they seem to have done the (much simpler) REP STOS optimizations
separately and later than the REP MOVS one.
In contrast, when AMD introduced support for FSRM ("Fast Short REP
MOVS"), in the Zen 3 core, it appears to have improved the REP STOS case
at the same time, and since the FSRS bit was added by Intel later, it
doesn't show up on those AMD Zen 3 cores.
And now that we made use of FSRS for the "rep stos" conditional, that
made those AMD machines unnecessarily slower. The Intel situation where
"rep movs" is fast, but "rep stos" isn't, is just odd. The 'stos' case
is a lot simpler with no aliasing, no mutual alignment issues, no
complicated cases.
So this just sets FSRS automatically when FSRM is available on AMD
machines, to get back all the nice REP STOS goodness in Zen 3.
Reported-and-tested-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Boris Burkov
Toke Høiland-Jørgensen
Linus Torvalds
Rob Herring
Ming Lei
Vladimir Oltean
Andy Chi
Takashi Iwai
Jakub Kicinski
Mat Martineau
Matthieu Baerts
Sebastian Basierski
Vadim Fedorenko
Christophe JAILLET
Andrea Righi
Daniel Borkmann
Dan Carpenter
Li Lanzhe
Nikita Zhandarovich
Chancel Liu
Arnd Bergmann
Ido Schimmel
Jaroslav Kysela
David S. Miller
Paolo Abeni
Alexander Aring
Seiji Nishikawa
Tiezhu Yang
Enze Li
Qing Zhang
David Howells