IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
The inspur_platform_profile driver and the xiaomi-wmi driver both
meet the requirements for modern WMI drivers, as they both do not
use the legacy GUID-based interface and can be safely instantiated
multiple times.
Mark them both as legacy-free using the no_singleton flag.
Compile-tested only.
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20240402143059.8456-1-W_Armin@gmx.de
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
ACER Vivobook Flip (TP401NAS) virtual intel switch is implemented as
follow:
Device (VGBI)
{
Name (_HID, EisaId ("INT33D6") ...
Name (VBDS, Zero)
Method (_STA, 0, Serialized) // _STA: Status ...
Method (VBDL, 0, Serialized)
{
PB1E |= 0x20
VBDS |= 0x40
}
Method (VGBS, 0, Serialized)
{
Return (VBDS) /* \_SB_.PCI0.SBRG.EC0_.VGBI.VBDS */
}
...
}
By default VBDS is set to 0. At boot it is set to clamshell (bit 6 set)
only after method VBDL is executed.
Since VBDL is now evaluated in the probe routine later, after the device
is registered, the retrieved value of VBDS was still 0 ("tablet mode")
when setting up the virtual switch.
Make sure to evaluate VGBS after VBDL, to ensure the
convertible boots in clamshell mode, the expected default.
Fixes: 26173179fa ("platform/x86: intel-vbtn: Eval VBDL after registering our notifier")
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20240329143206.2977734-3-gwendal@chromium.org
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
The check for a device having virtual buttons is done using
acpi_has_method(..."VBDL"). Mimic that for checking virtual switch
presence.
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20240329143206.2977734-2-gwendal@chromium.org
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Stop logging unknown event / unknown keycode messages on suspend /
resume on a Toshiba Portege Z830:
1. The Toshiba Portege Z830 sends a 0x8e event when the power button
is pressed, ignore this.
2. The Toshiba Portege Z830 sends a 0xe00 hotkey event on resume from
suspend, ignore this.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20240402124351.167152-1-hdegoede@redhat.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Add INTC107B for Lunar Lake and INTC10CB for Arrow Lake ACPI devices IDs.
Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com>
Link: https://lore.kernel.org/r/20240405122630.32154-1-sumeet.r.pawnikar@intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
If, for example, the power button is configured to suspend, holding it
and releasing it after the machine has suspended, will wake the machine.
Also on some machines, power button release events are sent during
hibernation, even if the button wasn't used to hibernate the machine.
This causes hibernation to be aborted.
Fixes: 0c4cae1bc0 ("PM: hibernate: Avoid missing wakeup events during hibernation")
Signed-off-by: David McFarland <corngood@gmail.com>
Tested-by: Enrik Berkhan <Enrik.Berkhan@inka.de>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/878r1tpd6u.fsf_-_@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
ACPI bus core already sets the .owner, so driver does not need to.
Acked-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPI bus core already sets the .owner, so driver does not need to.
Acked-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPI bus core already sets the .owner, so driver does not need to.
Acked-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPI bus core already sets the .owner, so driver does not need to.
Acked-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPI bus core already sets the .owner, so driver does not need to.
Acked-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPI bus core already sets the .owner, so driver does not need to.
Acked-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPI bus core already sets the .owner, so driver does not need to.
Acked-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPI bus core already sets the .owner, so driver does not need to.
Acked-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPI bus core already sets the .owner, so driver does not need to.
Acked-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPI bus core already sets the .owner, so driver does not need to.
Acked-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPI bus core already sets the .owner, so driver does not need to.
Acked-by: Thadeu Lima de Souza Cascardo <cascardo@holoscopio.com>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPI bus core already sets the .owner, so driver does not need to.
Acked-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
When logging the warning about receiving a button event on a device
without buttons log the event code which triggered the warning.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Link: https://lore.kernel.org/r/20240327195712.43851-1-hdegoede@redhat.com
Since commit e2ffcda162 ("ACPI: OSL: Allow Notify () handlers to run
on all CPUs"), the ACPI core allows multiple notify calls to be active
at the same time. This means that two instances of quickstart_notify()
running at the same time can mess which each others input sequences.
Fix this by protecting the input sequence with a mutex.
Compile-tested only.
Fixes: afd66f2a739e ("platform/x86: Add ACPI quickstart button (PNP0C32) driver")
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20240327214524.123935-1-W_Armin@gmx.de
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
The new driver Kconfig entry has a typo that causes a link failure
when CONFIG_INPUT_SPARSEKMAP is disabled:
x86_64-linux-ld: drivers/platform/x86/quickstart.o: in function `quickstart_notify':
quickstart.c:(.text+0x96): undefined reference to `sparse_keymap_report_event'
x86_64-linux-ld: drivers/platform/x86/quickstart.o: in function `quickstart_probe':
quickstart.c:(.text+0x1da): undefined reference to `sparse_keymap_setup'
Select this symbol instead of the incorrect INPUT_SPARSE_KEYMAP.
Fixes: afd66f2a739e ("platform/x86: Add ACPI quickstart button (PNP0C32) driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Armin Wolf <W_Armin@gmx.de>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Link: https://lore.kernel.org/r/20240404123435.2684819-1-arnd@kernel.org
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
There is a mix of a few improvements to the driver.
I have done this instead of review, so it can quickly be
folded into the original code (partially or fully).
Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20240327215208.649020-1-andy.shevchenko@gmail.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
devm_device_add_groups() is being removed from the kernel, so move the
hsmp driver to use device_add_groups() instead. The logic is identical,
when the device is removed the driver core will properly clean up and
remove the groups, and the memory used by the attribute groups will be
freed because it was created with dev_* calls, so this is functionally
identical overall.
Cc: Naveen Krishna Chatradhi <naveenkrishna.chatradhi@amd.com>
Cc: Carlos Bilbao <carlos.bilbao@amd.com>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: "Ilpo Järvinen" <ilpo.jarvinen@linux.intel.com>
Cc: platform-driver-x86@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/2024032732-thigh-smite-f5dd@gregkh
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
The Z830 has some buttons that will only work properly as "quickstart"
buttons. To enable them in that mode, a value between 1 and 7 must be
used for HCI_HOTKEY_EVENT. Windows uses 0x5 on this laptop so use that for
maximum predictability and compatibility.
As there is not yet a known way of auto detection, this patch uses a DMI
quirk table. A module parameter is exposed to allow setting this on other
models for testing.
Signed-off-by: Arvid Norlander <lkml@vorpal.se>
Tested-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20240131111641.4418-3-W_Armin@gmx.de
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
This drivers supports the ACPI quickstart button device, which
is used to send manufacturer-specific events to userspace.
Since the meaning of those events is not standardized, userspace
has to use for example hwdb to decode them.
The driver itself is based on an earlier proposal, but contains
some improvements and uses the device wakeup API instead of a
custom sysfs file.
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Tested-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20240131111641.4418-2-W_Armin@gmx.de
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
There is a KTD2026 LED controller to manage the indicator LED for Xiaomi
pad2. The ACPI for it is not properly made so the kernel can't get
a correct description of it.
This work adds a description for this RGB LED controller and also sets
a trigger to indicate the charging event (bq27520-0-charging). When it
is charging, the indicator LED will be turned on.
Signed-off-by: Kate Hsuan <hpa@redhat.com>
Link: https://lore.kernel.org/r/20240322033736.9344-2-hpa@redhat.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Add lenovo WMI camera button driver to support camera button.
The Camera button is a GPIO device. This driver receives ACPI notifications
when the camera button is switched on/off. This driver is used in
Lenovo A70, it is a Computer integrated machine.
Signed-off-by: Ai Chao <aichao@kylinos.cn>
Link: https://lore.kernel.org/r/20240327082737.336992-1-aichao@kylinos.cn
Reviewed-by: Armin Wolf <W_Armin@gmx.de>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Add Acer Predator PH18-71 to acer_quirks with predator_v4
to support mode button and fan speed sensor.
Signed-off-by: Bernhard Rosenkränzer <bero@baylibre.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20240329152800.29393-1-bero@baylibre.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
If an error code other than EINVAL, ENODEV or ETIME is returned
by ec_read()/ec_write(), then AE_OK is wrongly returned.
Fix this by only returning AE_OK if the return code is 0, and
return AE_ERROR otherwise.
Tested on a Dell Inspiron 3505 and a Asus Prime B650-Plus.
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20240314184538.2933-2-W_Armin@gmx.de
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
The ACPI EC address space handler currently only supports
reading/writing 8 bit values. Some firmware implementations however
want to access for example 16 bit values, which is perfectly legal
according to the ACPI spec.
Add support for reading/writing such values.
Tested on a Dell Inspiron 3505 and a Asus Prime B650-Plus.
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Link: https://lore.kernel.org/r/20240314184538.2933-1-W_Armin@gmx.de
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Follow the advice in Documentation/filesystems/sysfs.rst:
show() should only use sysfs_emit() or sysfs_emit_at() when formatting
the value to be returned to user space.
Signed-off-by: Ai Chao <aichao@kylinos.cn>
Link: https://lore.kernel.org/r/20240319070038.309683-1-aichao@kylinos.cn
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Follow the advice in Documentation/filesystems/sysfs.rst:
show() should only use sysfs_emit() or sysfs_emit_at() when formatting
the value to be returned to user space.
Signed-off-by: Ai Chao <aichao@kylinos.cn>
Link: https://lore.kernel.org/r/20240319064243.297320-1-aichao@kylinos.cn
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
This changes all *_show attributes in asus-wmi.c to use sysfs_emit()
instead of the older method of writing to the output buffer manually.
Follow the advice in Documentation/filesystems/sysfs.rst:
show() should only use sysfs_emit() or sysfs_emit_at() when formatting
the value to be returned to user space.
Signed-off-by: Ai Chao <aichao@kylinos.cn>
Link: https://lore.kernel.org/r/20240319055636.150289-1-aichao@kylinos.cn
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Follow the advice in Documentation/filesystems/sysfs.rst:
show() should only use sysfs_emit() or sysfs_emit_at() when formatting
the value to be returned to user space.
Signed-off-by: Ai Chao <aichao@kylinos.cn>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20240314063703.315841-1-aichao@kylinos.cn
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
p2sb_get_devfn() always succeeds, make it return void and
remove error checking from its callers.
Reviewed-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20240305094500.23778-1-hdegoede@redhat.com
heap optimizations".
- Kuan-Wei Chiu has also sped up the library sorting code in the series
"lib/sort: Optimize the number of swaps and comparisons".
- Alexey Gladkov has added the ability for code running within an IPC
namespace to alter its IPC and MQ limits. The series is "Allow to
change ipc/mq sysctls inside ipc namespace".
- Geert Uytterhoeven has contributed some dhrystone maintenance work in
the series "lib: dhry: miscellaneous cleanups".
- Ryusuke Konishi continues nilfs2 maintenance work in the series
"nilfs2: eliminate kmap and kmap_atomic calls"
"nilfs2: fix kernel bug at submit_bh_wbc()"
- Nathan Chancellor has updated our build tools requirements in the
series "Bump the minimum supported version of LLVM to 13.0.1".
- Muhammad Usama Anjum continues with the selftests maintenance work in
the series "selftests/mm: Improve run_vmtests.sh".
- Oleg Nesterov has done some maintenance work against the signal code
in the series "get_signal: minor cleanups and fix".
Plus the usual shower of singleton patches in various parts of the tree.
Please see the individual changelogs for details.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZfMnvgAKCRDdBJ7gKXxA
jjKMAP4/Upq07D4wjkMVPb+QrkipbbLpdcgJ++q3z6rba4zhPQD+M3SFriIJk/Xh
tKVmvihFxfAhdDthseXcIf1nBjMALwY=
=8rVc
-----END PGP SIGNATURE-----
Merge tag 'mm-nonmm-stable-2024-03-14-09-36' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull non-MM updates from Andrew Morton:
- Kuan-Wei Chiu has developed the well-named series "lib min_heap: Min
heap optimizations".
- Kuan-Wei Chiu has also sped up the library sorting code in the series
"lib/sort: Optimize the number of swaps and comparisons".
- Alexey Gladkov has added the ability for code running within an IPC
namespace to alter its IPC and MQ limits. The series is "Allow to
change ipc/mq sysctls inside ipc namespace".
- Geert Uytterhoeven has contributed some dhrystone maintenance work in
the series "lib: dhry: miscellaneous cleanups".
- Ryusuke Konishi continues nilfs2 maintenance work in the series
"nilfs2: eliminate kmap and kmap_atomic calls"
"nilfs2: fix kernel bug at submit_bh_wbc()"
- Nathan Chancellor has updated our build tools requirements in the
series "Bump the minimum supported version of LLVM to 13.0.1".
- Muhammad Usama Anjum continues with the selftests maintenance work in
the series "selftests/mm: Improve run_vmtests.sh".
- Oleg Nesterov has done some maintenance work against the signal code
in the series "get_signal: minor cleanups and fix".
Plus the usual shower of singleton patches in various parts of the tree.
Please see the individual changelogs for details.
* tag 'mm-nonmm-stable-2024-03-14-09-36' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (77 commits)
nilfs2: prevent kernel bug at submit_bh_wbc()
nilfs2: fix failure to detect DAT corruption in btree and direct mappings
ocfs2: enable ocfs2_listxattr for special files
ocfs2: remove SLAB_MEM_SPREAD flag usage
assoc_array: fix the return value in assoc_array_insert_mid_shortcut()
buildid: use kmap_local_page()
watchdog/core: remove sysctl handlers from public header
nilfs2: use div64_ul() instead of do_div()
mul_u64_u64_div_u64: increase precision by conditionally swapping a and b
kexec: copy only happens before uchunk goes to zero
get_signal: don't initialize ksig->info if SIGNAL_GROUP_EXIT/group_exec_task
get_signal: hide_si_addr_tag_bits: fix the usage of uninitialized ksig
get_signal: don't abuse ksig->info.si_signo and ksig->sig
const_structs.checkpatch: add device_type
Normalise "name (ad@dr)" MODULE_AUTHORs to "name <ad@dr>"
dyndbg: replace kstrdup() + strchr() with kstrdup_and_replace()
list: leverage list_is_head() for list_entry_is_head()
nilfs2: MAINTAINERS: drop unreachable project mirror site
smp: make __smp_processor_id() 0-argument macro
fat: fix uninitialized field in nostale filehandles
...
This was a relatively calm development cycle. Most of changes are
rather small device-specific fixes and enhancements. The only
significant changes in ALSA core are code refactoring with the recent
cleanup infrastructure, which should bring no functionality changes.
Some highlights below:
Core:
- Lots of cleanups in ALSA core code with automatic kfree cleanup
and locking guard macros
- New ALSA core kunit test
ASoC:
- SoundWire support for AMD ACP 6.3 systems
- Support for reporting version information for AVS firmware
- Support DSPless mode for Intel Soundwire systems
- Support for configuring CS35L56 amplifiers using EFI calibration
data
- Log which component is being operated on as part of power management
trace events.
- Support for Microchip SAM9x7, NXP i.MX95 and Qualcomm WCD939x
HD- and USB-audio:
- More Cirrus HD-audio codec support
- TAS2781 HD-audio codec fixes
- Scarlett2 mixer fixes
Others:
- Enhancement of virtio driver for audio control supports
- Cleanups of legacy PM code with new macros
- Firewire sound updates
-----BEGIN PGP SIGNATURE-----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=h9kz
-----END PGP SIGNATURE-----
Merge tag 'sound-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound updates from Takashi Iwai:
"This was a relatively calm development cycle. Most of changes are
rather small device-specific fixes and enhancements. The only
significant changes in ALSA core are code refactoring with the recent
cleanup infrastructure, which should bring no functionality changes.
Some highlights below:
Core:
- Lots of cleanups in ALSA core code with automatic kfree cleanup and
locking guard macros
- New ALSA core kunit test
ASoC:
- SoundWire support for AMD ACP 6.3 systems
- Support for reporting version information for AVS firmware
- Support DSPless mode for Intel Soundwire systems
- Support for configuring CS35L56 amplifiers using EFI calibration
data
- Log which component is being operated on as part of power
management trace events.
- Support for Microchip SAM9x7, NXP i.MX95 and Qualcomm WCD939x
HD- and USB-audio:
- More Cirrus HD-audio codec support
- TAS2781 HD-audio codec fixes
- Scarlett2 mixer fixes
Others:
- Enhancement of virtio driver for audio control supports
- Cleanups of legacy PM code with new macros
- Firewire sound updates"
* tag 'sound-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (307 commits)
ALSA: usb-audio: Stop parsing channels bits when all channels are found.
ALSA: hda/tas2781: remove unnecessary runtime_pm calls
ALSA: hda/realtek - ALC236 fix volume mute & mic mute LED on some HP models
ALSA: aaci: Delete unused variable in aaci_do_suspend
ALSA: scarlett2: Fix Scarlett 4th Gen input gain range again
ALSA: scarlett2: Fix Scarlett 4th Gen input gain range
ALSA: scarlett2: Fix Scarlett 4th Gen autogain status values
ALSA: scarlett2: Fix Scarlett 4th Gen 4i4 low-voltage detection
ALSA: hda/tas2781: restore power state after system_resume
ALSA: hda/tas2781: do not call pm_runtime_force_* in system_resume/suspend
ALSA: hda/tas2781: do not reset cur_* values in runtime_suspend
ALSA: hda/tas2781: add lock to system_suspend
ALSA: hda/tas2781: use dev_dbg in system_resume
ALSA: hda/realtek: fix ALC285 issues on HP Envy x360 laptops
platform/x86: serial-multi-instantiate: Add support for CS35L54 and CS35L57
ALSA: hda: cs35l56: Add support for CS35L54 and CS35L57
ASoC: cs35l56: Add support for CS35L54 and CS35L57
ASoC: Intel: catpt: Carefully use PCI bitwise constants
ALSA: hda: hda_component: Include sound/hda_codec.h
ALSA: hda: hda_component: Add missing #include guards
...
Highlights:
- acer-wmi: New HW support
- amd/pmf: Support for new revision of heartbeat notify
- asus-wmi: Correctly handle HW without LEDs
- fujitsu-laptop: Battery charge control support
- hp-wmi: Support for new thermal profiles
- ideapad-laptop: Support for refresh rate key
- intel/pmc: Put AI accelerator (GNA) into D3 if it has no
driver to allow entry into low-power modes, and
temporarily removed Lunar Lake SSRAM support due
to breaking FW changes causing probe fail
(further breaking FW changes are still pending)
- pmc/punit_atom: Report devices that prevent reacing low power
levels
- surface: Fan speed function support
- thinkpad_acpi: Support for more sperial keys and complete the
list of models with non-standard fan registers
- touchscreen_dmi: New HW support
- wmi: Continued modernization efforts
- Removal of obsoleted ledtrig-audio call and the related dependency
- Debug & metrics interface improvements
- Miscellaneous cleanups / fixes / improvements
The following is an automated shortlog grouped by driver:
acer-wmi:
- Add predator_v4 module parameter
- Add support for Acer PH16-71
amd/hsmp:
- Add support for ACPI based probing
- Cache pci_dev in struct hsmp_socket
- Change devm_kzalloc() to devm_kcalloc()
- Check num_sockets against MAX_AMD_SOCKETS
- Create static func to handle platdev
- Define a struct to hold mailbox regs
- Move dev from platdev to hsmp_socket
- Move hsmp_test to probe
- Non-ACPI support for AMD F1A_M00~0Fh
- Remove extra parenthesis and add a space
- Restructure sysfs group creation
amd/pmf:
- Add missing __iomem attribute to policy_base
- Add support to get APTS index numbers for static slider
- Add support to get sbios requests in PMF driver
- Add support to get sps default APTS index values
- Add support to notify sbios heart beat event
- Differentiate PMF ACPI versions
- Disable debugfs support for querying power thermals
- Do not use readl() for policy buffer access
- Fix possible out-of-bound memory accesses
- Fix return value of amd_pmf_start_policy_engine()
- Update sps power thermals according to the platform-profiles
- Use struct for cookie header
asus-wmi:
- Consider device is absent when the read is ~0
- Revert: Support WMI event queue
clk: x86:
- Move clk-pmc-atom register defines to include/linux/platform_data/x86/pmc_atom.h
dell-privacy:
- Remove usage of wmi_has_guid()
Documentation/x86/amd/hsmp:
- Updating urls
drivers/mellanox:
- Convert snprintf to sysfs_emit
fujitsu-laptop:
- Add battery charge control support
hp-wmi:
- Add thermal profile support for 8BAD boards
- Tidy up module source code
ideapad-laptop:
- map Fn + R key to KEY_REFRESH_RATE_TOGGLE
- support Fn+R dual-function key
Input:
- allocate keycode for Display refresh rate toggle
intel/ifs:
- Add an entry rendezvous for SAF
- Add current batch number to trace output
- Remove unnecessary initialization of 'ret'
- Replace the exit rendezvous with an entry rendezvous for ARRAY_BIST
- Trace on all HT threads when executing a test
intel/pmc/arl:
- Put GNA device in D3
intel/pmc:
- Improve PKGC residency counters debug
intel/pmc/lnl:
- Remove SSRAM support
intel_scu_ipcutil:
- Make scu static
intel_scu_pcidrv:
- Remove unused intel-mid.h
intel_scu_wdt:
- Remove unused intel-mid.h
intel/tpmi:
- Change vsec offset to u64
intel/vsec:
- Remove nuisance message
ISST:
- Allow reading core-power state on HWP disabled systems
mlxbf-pmc:
- Cleanup signed/unsigned mix-up
- fix signedness bugs
- Ignore unsupported performance blocks
mlxbf-pmc: mlxbf_pmc_event_list():
- make size ptr optional
mlxbf-pmc:
- Replace uintN_t with kernel-style types
mlxreg-hotplug:
- Remove redundant NULL-check
pmc_atom:
- Annotate d3_sts register bit defines
- Check state of PMC clocks on s2idle
- Check state of PMC managed devices on s2idle
silicom-platform:
- clean up a check
surface: aggregator_registry:
- add entry for fan speed
thinkpad_acpi:
- Add more ThinkPads with non-standard reg address for fan
- Fix to correct wrong temp reporting on some ThinkPads
- remove redundant assignment to variable i
- Simplify thermal mode checking
- Support for mode FN key
touchscreen_dmi:
- Add an extra entry for a variant of the Chuwi Vi8 tablet
wmi:
- Always evaluate _WED when receiving an event
- Check if event data is not NULL
- Check if WMxx control method exists
- Do not instantiate older WMI drivers multiple times
- Ignore duplicated GUIDs in legacy matches
- Make input buffer mandatory when evaluating methods
- Prevent incompatible event driver from probing
- Remove obsolete duplicate GUID allowlist
- Remove unnecessary out-of-memory message
- Replace pr_err() with dev_err()
- Stop using ACPI device class
- Update documentation regarding _WED
- Use ACPI device name in netlink event
- Use FW_BUG when warning about missing control methods
x86/atom:
- Check state of Punit managed devices on s2idle
x86: ibm_rtl:
- make rtl_subsys const
x86: wmi:
- make wmi_bus_type const
platform/x86:
- make fw_attr_class constant
- remove obsolete calls to ledtrig_audio_get
Merges:
- Merge tag 'platform-drivers-x86-v6.8-2' into pdx/for-next
- Merge tag 'platform-drivers-x86-v6.8-4' into pdx86/for-next
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQSCSUwRdwTNL2MhaBlZrE9hU+XOMQUCZfLZKgAKCRBZrE9hU+XO
MWqnAQCZW0KiSzXbJkTN4GWlMOqnlaJsiflnPeVNxH59bDUTeQEA/OdSzyiDUqKr
zJcGnOyILuQ3wCvQ5SuqRCwjFHXOQg0=
=8y6r
-----END PGP SIGNATURE-----
Merge tag 'platform-drivers-x86-v6.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver updates from Ilpo Järvinen:
- New acer-wmi HW support
- Support for new revision of amd/pmf heartbeat notify
- Correctly handle asus-wmi HW without LEDs
- fujitsu-laptop battery charge control support
- Support for new hp-wmi thermal profiles
- Support ideapad-laptop refresh rate key
- Put intel/pmc AI accelerator (GNA) into D3 if it has no driver to
allow entry into low-power modes, and temporarily removed Lunar Lake
SSRAM support due to breaking FW changes causing probe fail (further
breaking FW changes are still pending)
- Report pmc/punit_atom devices that prevent reacing low power levels
- Surface Fan speed function support
- Support for more sperial keys and complete the list of models with
non-standard fan registers in thinkpad_acpi
- New DMI touchscreen HW support
- Continued modernization efforts of wmi
- Removal of obsoleted ledtrig-audio call and the related dependency
- Debug & metrics interface improvements
- Miscellaneous cleanups / fixes / improvements
* tag 'platform-drivers-x86-v6.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (87 commits)
platform/x86/intel/pmc: Improve PKGC residency counters debug
platform/x86: asus-wmi: Consider device is absent when the read is ~0
Documentation/x86/amd/hsmp: Updating urls
platform/mellanox: mlxreg-hotplug: Remove redundant NULL-check
platform/x86/amd/pmf: Update sps power thermals according to the platform-profiles
platform/x86/amd/pmf: Add support to get sps default APTS index values
platform/x86/amd/pmf: Add support to get APTS index numbers for static slider
platform/x86/amd/pmf: Add support to notify sbios heart beat event
platform/x86/amd/pmf: Add support to get sbios requests in PMF driver
platform/x86/amd/pmf: Disable debugfs support for querying power thermals
platform/x86/amd/pmf: Differentiate PMF ACPI versions
x86/platform/atom: Check state of Punit managed devices on s2idle
platform/x86: pmc_atom: Check state of PMC clocks on s2idle
platform/x86: pmc_atom: Check state of PMC managed devices on s2idle
platform/x86: pmc_atom: Annotate d3_sts register bit defines
clk: x86: Move clk-pmc-atom register defines to include/linux/platform_data/x86/pmc_atom.h
platform/x86: make fw_attr_class constant
platform/x86/intel/tpmi: Change vsec offset to u64
platform/x86: intel_scu_pcidrv: Remove unused intel-mid.h
platform/x86: intel_scu_wdt: Remove unused intel-mid.h
...
- Store zone trips table and zone operations directly in struct
thermal_zone_device (Rafael Wysocki).
- Fix up flex array initialization during thermal zone device
registration (Nathan Chancellor).
- Rework writable trip points handling in the thermal core and
several drivers (Rafael Wysocki).
- Thermal core code cleanups (Dan Carpenter, Flavio Suligoi).
- Use thermal zone accessor functions in the int340x Intel thermal
driver (Rafael Wysocki).
- Add Lunar Lake-M PCI ID to the int340x Intel thermal driver (Srinivas
Pandruvada).
- Minor fixes for thermal governors (Rafael Wysocki, Di Shen).
- Trip point handling fixes for the iwlwifi wireless driver (Rafael
Wysocki).
- Code cleanups (Rafael J. Wysocki, AngeloGioacchino Del Regno).
-----BEGIN PGP SIGNATURE-----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=Is/Y
-----END PGP SIGNATURE-----
Merge tag 'thermal-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull thermal control updates from Rafael Wysocki:
"These mostly change the thermal core in a few ways allowing thermal
drivers to be simplified, in particular in their removal and failing
probe handling parts that are notoriously prone to errors, and
propagate the changes to several drivers.
Apart from that, support for a new platform is added (Intel Lunar
Lake-M), some bugs are fixed and some code is cleaned up, as usual.
Specifics:
- Store zone trips table and zone operations directly in struct
thermal_zone_device (Rafael Wysocki)
- Fix up flex array initialization during thermal zone device
registration (Nathan Chancellor)
- Rework writable trip points handling in the thermal core and
several drivers (Rafael Wysocki)
- Thermal core code cleanups (Dan Carpenter, Flavio Suligoi)
- Use thermal zone accessor functions in the int340x Intel thermal
driver (Rafael Wysocki)
- Add Lunar Lake-M PCI ID to the int340x Intel thermal driver
(Srinivas Pandruvada)
- Minor fixes for thermal governors (Rafael Wysocki, Di Shen)
- Trip point handling fixes for the iwlwifi wireless driver (Rafael
Wysocki)
- Code cleanups (Rafael J. Wysocki, AngeloGioacchino Del Regno)"
* tag 'thermal-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (29 commits)
thermal: core: remove unnecessary check in trip_point_hyst_store()
thermal: intel: int340x_thermal: Use thermal zone accessor functions
thermal: core: Remove excess empty line from a comment
thermal: int340x: processor_thermal: Add Lunar Lake-M PCI ID
thermal: core: Eliminate writable trip points masks
thermal: of: Set THERMAL_TRIP_FLAG_RW_TEMP directly
thermal: imx: Set THERMAL_TRIP_FLAG_RW_TEMP directly
wifi: iwlwifi: mvm: Set THERMAL_TRIP_FLAG_RW_TEMP directly
mlxsw: core_thermal: Set THERMAL_TRIP_FLAG_RW_TEMP directly
thermal: intel: Set THERMAL_TRIP_FLAG_RW_TEMP directly
thermal: core: Drop the .set_trip_hyst() thermal zone operation
thermal: core: Add flags to struct thermal_trip
thermal: core: Move initial num_trips assignment before memcpy()
thermal: Get rid of CONFIG_THERMAL_WRITABLE_TRIPS
thermal: intel: Adjust ops handling during thermal zone registration
thermal: ACPI: Constify acpi_thermal_zone_ops
thermal: core: Store zone ops in struct thermal_zone_device
thermal: intel: Discard trip tables after zone registration
thermal: ACPI: Discard trips table after zone registration
thermal: core: Store zone trips table in struct thermal_zone_device
...
The current code only prints PKGC-10 residency when the PKGC-10
is not reached in previous 'freeze' attempt. To debug PKGC-10 issues, we
also need to know other PKGC residency counters to better triage issues.
Ex:
1. When system is stuck in PC2, it can be caused short LTR from device.
2. When system is stuck in PC8, it can be caused by display engine.
To better triage issues, all PKGC residency are needed when issues happen.
Example log:
CPU did not enter Package C10!!! (Package C10 cnt=0x0)
Prev Package C2 cnt = 0x2191a325de, Current Package C2 cnt = 0x21aba30724
Prev Package C3 cnt = 0x0, Current Package C3 cnt = 0x0
Prev Package C6 cnt = 0x0, Current Package C6 cnt = 0x0
Prev Package C7 cnt = 0x0, Current Package C7 cnt = 0x0
Prev Package C8 cnt = 0x0, Current Package C8 cnt = 0x0
Prev Package C9 cnt = 0x0, Current Package C9 cnt = 0x0
Prev Package C10 cnt = 0x0, Current Package C10 cnt = 0x0
With this log, we can know whether it's a stuck PC2 issue, and we can
check whether the short LTR from device causes the issue.
Signed-off-by: Kane Chen <kane.chen@intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20240308033127.1013053-1-kane.chen@intel.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
AAEON PICO-TGU4 board doesn't have any LED but there are bogus LED
controls under /sys/class/leds:
$ ls /sys/class/leds
asus::kbd_backlight asus::lightbar platform::micmute
The reason is that the ~0 read from asus_wmi_get_devstate() is treated
as a valid state, in truth it means the device is absent.
So filter out ~0 read to prevent bogus LED controls being created.
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20240308053255.224496-1-kai.heng.feng@canonical.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Highlights:
- Fix P2SB regression causing ACPI errors and high CPU load
- Fix error return path in amd_pmf_init_smart_pc()
The following is an automated git shortlog grouped by driver:
p2sb:
- On Goldmont only cache P2SB and SPI devfn BAR
platform/x86/amd/pmf:
- Fix missing error code in amd_pmf_init_smart_pc()
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEEuvA7XScYQRpenhd+kuxHeUQDJ9wFAmXm5sIUHGhkZWdvZWRl
QHJlZGhhdC5jb20ACgkQkuxHeUQDJ9ziBgf8DrSSHfwsLseOV0wqzv2ewn0/YwGD
0/KUWoEe8Q6RYU2iFPj912r3ky2qtA5I4ZUJXLcD6lTL23FzdOagsJMEr0iwPC5s
p1nnNCsVChkZvyU6BOvPa8m7W9Od0FY2RnNqtGhC8x9hsnhWOVDW4yG0n7tC+gbN
3tNqUZDpPotY8jZhpO7kazVHS0gTbYw6ABOvaz73FcDjdfM0TnkVOjDy7+1CGH7t
wSIo9bQvGvjXqjXk8NQg0GtQt1qZiwpbCycmkJEYXXMnx1HEkdi/UClW74CX2wmr
YknM05A2hLBLSmHCyODjZnZ3689ODx4nv4H6226Az8B6dW8j81dmIQEPzQ==
=8CgQ
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQSCSUwRdwTNL2MhaBlZrE9hU+XOMQUCZfAzvAAKCRBZrE9hU+XO
MUOLAQDJIFvGoq6PZZ89ooX/6n1NmMS1Uz/MmXygOMGzjqH2KQEA7/5JdgQ5ZaMD
Uy2lSkSk9K9PzMTuTAG3TcSUEuQrggo=
=0QK+
-----END PGP SIGNATURE-----
Merge tag 'platform-drivers-x86-v6.8-4' into pdx86/for-next
Merge tag 'platform-drivers-x86-v6.8-4' fixes into pdx86/for-next to
resolve amd/pmf conflicts.
Update power thermals according to the platform-profiles selected by the
user.
Co-developed-by: Patil Rajesh Reddy <Patil.Reddy@amd.com>
Signed-off-by: Patil Rajesh Reddy <Patil.Reddy@amd.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://lore.kernel.org/r/20240306114415.3267603-8-Shyam-sundar.S-k@amd.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
During the driver probe, the default cache values for the static slider
would be obtained by evaluating the APTS method. Add support to use
these values as the thermal settings to be updated on the system based
on the changing platform-profiles.
Co-developed-by: Patil Rajesh Reddy <Patil.Reddy@amd.com>
Signed-off-by: Patil Rajesh Reddy <Patil.Reddy@amd.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://lore.kernel.org/r/20240306114415.3267603-7-Shyam-sundar.S-k@amd.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
APMF spec has a newer section called the APTS (AMD Performance and
Thermal State) information, where each slider/power mode is associated
with an index number.
Add support to get these indices for the Static Slider.
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Co-developed-by: Patil Rajesh Reddy <Patil.Reddy@amd.com>
Signed-off-by: Patil Rajesh Reddy <Patil.Reddy@amd.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://lore.kernel.org/r/20240306114415.3267603-6-Shyam-sundar.S-k@amd.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Add support for newer revision of the heart beat notify events.
This event is used to notify to the OEM BIOS on driver
load/unload/suspend/resume scenarios.
If OEM BIOS does not receive the heart beat event from PMF driver, OEM
BIOS shall conclude that PMF driver is no more active and BIOS will
update to the legacy system power thermals.
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Co-developed-by: Patil Rajesh Reddy <Patil.Reddy@amd.com>
Signed-off-by: Patil Rajesh Reddy <Patil.Reddy@amd.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://lore.kernel.org/r/20240306114415.3267603-5-Shyam-sundar.S-k@amd.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Update the APMF function index 2 for family 1Ah, that gets the
information of SBIOS requests (like the pending requests from BIOS,
custom notifications, updation of power limits etc).
Co-developed-by: Patil Rajesh Reddy <Patil.Reddy@amd.com>
Signed-off-by: Patil Rajesh Reddy <Patil.Reddy@amd.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://lore.kernel.org/r/20240306114415.3267603-4-Shyam-sundar.S-k@amd.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
The GET interface to receive the active power thermal information from
the PMFW has been deprecated. Hence drop the debugfs support from
version2 onwards.
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Co-developed-by: Patil Rajesh Reddy <Patil.Reddy@amd.com>
Signed-off-by: Patil Rajesh Reddy <Patil.Reddy@amd.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://lore.kernel.org/r/20240306114415.3267603-3-Shyam-sundar.S-k@amd.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
For family 1AH, certain PMF features have been enhanced - leading to a
newer APMF (AMD PMF) spec (BIOS and PMF driver interface) called v2.
This information would be fed into the if_version field of the
verify_interface method of the APMF call from the BIOS.
Use this information to store the version number to differentiate
between v1 or v2 and also store the information into the PMF private
data structure, as this information would be required for further code
branching to support the latest silicon.
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Co-developed-by: Patil Rajesh Reddy <Patil.Reddy@amd.com>
Signed-off-by: Patil Rajesh Reddy <Patil.Reddy@amd.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://lore.kernel.org/r/20240306114415.3267603-2-Shyam-sundar.S-k@amd.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Extend the s2idle check with checking that none of the PMC clocks
is in the forced-on state. If one of the clocks is in forced on
state then S0i3 cannot be reached.
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20240305105915.76242-5-hdegoede@redhat.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
For the Bay Trail or Cherry Trail SoC to enter the S0i3 power-level
at s2idle suspend requires most of the hw-blocks / devices in the SoC
to be in D3 when entering s2idle suspend.
If some devices are not in D3 then the SoC will stay in a higher
power state, consuming much more power from the battery then in S0i3.
Use the new acpi_s2idle_dev_ops and acpi_register_lps0_dev()
functionality to register a new s2idle check function which checks that
all hardware blocks in the South complex (controlled by the PMC)
are in a state that allows the SoC to enter S0i3 and prints an error
message for any device in D0.
Some blocks are not used on lower-featured versions of the SoC and
these blocks will always report being in D0 on SoCs were they are
not used. A false-positive mask is used to identify these blocks
and for blocks in this mask the error is turned into a debug message
to avoid false-positive error messages.
Note the pmc_atom code is enabled by CONFIG_X86_INTEL_LPSS which
already depends on ACPI.
Signed-off-by: Johannes Stezenbach <js@sig21.net>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
[hdegoede: Use acpi_s2idle_dev_ops, ignore fused off blocks, PMIC I2C]
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20240305105915.76242-4-hdegoede@redhat.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Since commit 43a7206b09 ("driver core: class: make class_register() take
a const *"), the driver core allows for struct class to be in read-only
memory, so move the fw_attr_class structure to be declared at build time
placing it into read-only memory, instead of having to be dynamically
allocated at boot time.
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: "Ricardo B. Marliere" <ricardo@marliere.net>
Link: https://lore.kernel.org/r/20240305-class_cleanup-platform-v1-1-9085c97b9355@marliere.net
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
The vsec offset can be 64 bit long depending on the PFS start. So change
type to u64. Also use 64 bit formatting for seq_printf.
Fixes: 47731fd286 ("platform/x86/intel: Intel TPMI enumeration driver")
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Cc: stable@vger.kernel.org # v6.3+
Link: https://lore.kernel.org/r/20240305194644.2077867-1-srinivas.pandruvada@linux.intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
intel-mid.h is providing some core parts of the South Complex PM,
which are usually not used by individual drivers. In particular,
this driver doesn't use it, so simply remove the unused header.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Link: https://lore.kernel.org/r/20240305161539.1364717-3-andriy.shevchenko@linux.intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
intel-mid.h is providing some core parts of the South Complex PM,
which are usually not used by individual drivers. In particular,
this driver doesn't use it, so simply remove the unused header.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Link: https://lore.kernel.org/r/20240305161539.1364717-2-andriy.shevchenko@linux.intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
The length of the policy buffer is not validated before accessing it,
which means that multiple out-of-bounds memory accesses can occur.
This is especially bad since userspace can load policy binaries over
debugfs.
Compile-tested only.
Fixes: 7c45534afa ("platform/x86/amd/pmf: Add support for PMF Policy Binary")
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Reviewed-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://lore.kernel.org/r/20240304205005.10078-5-W_Armin@gmx.de
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
The cookie header consists of a sign field and a length field.
Combine both in a single struct to make accesses simpler.
Compile-tested only.
Suggested-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Reviewed-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://lore.kernel.org/r/20240304205005.10078-4-W_Armin@gmx.de
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
The policy buffer is allocated using normal memory allocation
functions, so readl() should not be used on it.
Compile-tested only.
Fixes: 7c45534afa ("platform/x86/amd/pmf: Add support for PMF Policy Binary")
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Reviewed-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://lore.kernel.org/r/20240304205005.10078-3-W_Armin@gmx.de
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
amd_pmf_start_policy_engine() returns an negative error code upon
failure, so the TA_PMF_* error codes cannot be used here.
Return -EIO instead. Also stop shadowing the return code in
amd_pmf_get_pb_data().
Compile-tested only.
Suggested-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Fixes: 7c45534afa ("platform/x86/amd/pmf: Add support for PMF Policy Binary")
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Reviewed-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://lore.kernel.org/r/20240304205005.10078-2-W_Armin@gmx.de
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
When HWP (Hardware P-states) is disabled, dynamic SST features are
disabled. But user should still be able to read the current core-power
state, with legacy P-states. This will allow users to read current
configuration with static SST enabled from BIOS.
To address this, do not call disable_dynamic_sst_features() when the
request is for reading the state.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Link: https://lore.kernel.org/r/20240229002659.1416623-1-srinivas.pandruvada@linux.intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Add more ThinkPads with non-standard register addresses to read fan values.
ThinkPads added are L13 Yoga Gen1, X13 Yoga Gen1, L380, L390, 11e Gen5 GL,
11e Gen5 GL-R, 11e Gen5 KL-Y.
Signed-off-by: Vishnu Sankar <vishnuocv@gmail.com>
Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20240228150149.4799-1-vishnuocv@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
As is the case on Meteor Lake, the Gaussian & Neural Accelerator (GNA)
device is powered by BIOS to D0 by default. If no driver is loaded, this
will cause the Package C state to be limited to PC2, leading to
significant power consumption and decrease in batter life. Put the GNA
device in D3 by default if no driver is loaded for it.
Fixes: 83f168a1a4 ("platform/x86/intel/pmc: Add Arrow Lake S support to intel_pmc_core driver")
Signed-off-by: "David E. Box" <david.e.box@linux.intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Link: https://lore.kernel.org/r/20240227190134.1592072-3-david.e.box@linux.intel.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
A recent PMC firmware change in Lunar Lake caused the pmc_core driver to
fail to probe. This is due to a change in the GUID for PMC telemetry coming
from the SSRAM device. Until a final release is ready this value may
change again. In the meantime, disable the SSRAM support for Lunar Lake so
the driver can load and provide some basic functionality.
Fixes: 3748dfdae2 ("platform/x86/intel/pmc: Add Lunar Lake M support to intel_pmc_core driver")
Signed-off-by: "David E. Box" <david.e.box@linux.intel.com>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20240227190134.1592072-2-david.e.box@linux.intel.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
intel_vsec_walk_header() is used to configure features from devices that
don't provide a PCI VSEC or DVSEC structure. Some of these features may
be unsupported and fail to load. Ignore them silently as we do for
unsupported features described by VSEC/DVSEC.
Signed-off-by: "David E. Box" <david.e.box@linux.intel.com>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20240227190134.1592072-1-david.e.box@linux.intel.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
This parameter allows predator laptop users to test and use features
(mode button, platform profile, fan speed monitoring) without
adding model names to acer_quirks and compiling kernel.
Signed-off-by: SungHwan Jung <onenowy@gmail.com>
Link: https://lore.kernel.org/r/20240220080416.6395-1-onenowy@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Add Acer Predator PH16-71 to Acer_quirks with predator_v4
to support mode button and fan speed sensor.
Signed-off-by: SungHwan Jung <onenowy@gmail.com>
Link: https://lore.kernel.org/r/20240220055231.6451-1-onenowy@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
The variable is only used internally and has no external users,
so it should me made static.
Compile-tested only.
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Link: https://lore.kernel.org/r/20240223163901.13504-3-W_Armin@gmx.de
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
The value of policy_base is the return value of a devm_ioremap call,
which returns a __iomem pointer instead of an regular pointer.
Add the missing __iomem attribute.
Compile-tested only.
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Link: https://lore.kernel.org/r/20240223163901.13504-1-W_Armin@gmx.de
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
The whitelist-based approach for preventing older WMI drivers from
being instantiated multiple times has many drawbacks:
- uses cannot see all available WMI devices (if not whitelisted)
- whitelisting a WMI driver requires changes in the WMI driver core
- maintenance burden for driver and subsystem developers
Since the WMI driver core already takes care that older WMI drivers
are not being instantiated multiple times, remove the now redundant
whitelist.
Tested on a ASUS Prime B650-Plus.
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20240226193557.2888-3-W_Armin@gmx.de
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Many older WMI drivers cannot be instantiated multiple times for
two reasons:
- they are using the legacy GUID-based WMI API
- they are singletons (with global state)
Prevent such WMI drivers from binding to WMI devices with a duplicated
GUID, as this would mean that the WMI driver will be instantiated at
least two times (one for the original GUID and one for the duplicated
GUID).
WMI drivers which can be instantiated multiple times can signal this
by setting a flag inside struct wmi_driver.
Tested on a ASUS Prime B650-Plus.
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20240226193557.2888-2-W_Armin@gmx.de
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
When matching a WMI device to a GUID used by the legacy GUID-based
API, devices with a duplicated GUID should be ignored.
Add an additional WMI device flag signaling that the GUID used by
the WMI device is also used by another WMI device. Ignore such
devices inside the match functions used by the legacy GUID-based API.
Tested on a ASUS Prime B650-Plus.
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20240226193557.2888-1-W_Armin@gmx.de
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Newer Lenovo Yogas and Legions with 60Hz/90Hz displays send a wmi event
when Fn + R is pressed. This is intended for use to switch between the
two refresh rates.
The Fn + R key was incorrectly assigned to KEY_DISPLAYTOGGLE because it
is used to toggle the display on and off.
Map Fn + R key to the KEY_REFRESH_RATE_TOGGLE event code.
Signed-off-by: Gergo Koteles <soyer@irl.hu>
Link: https://lore.kernel.org/r/8fd36f0f016dde700396d8afaba1979d5dbc30a1.1710065750.git.soyer@irl.hu
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
The current implementation has a couple of shortcomings:
- It fails to handle hybrid systems correctly.
- The APIC registration code which handles CPU number assignents is in
the middle of the APIC code and detached from the topology evaluation.
- The various mechanisms which enumerate APICs, ACPI, MPPARSE and guest
specific ones, tweak global variables as they see fit or in case of
XENPV just hack around the generic mechanisms completely.
- The CPUID topology evaluation code is sprinkled all over the vendor
code and reevaluates global variables on every hotplug operation.
- There is no way to analyze topology on the boot CPU before bringing up
the APs. This causes problems for infrastructure like PERF which needs
to size certain aspects upfront or could be simplified if that would be
possible.
- The APIC admission and CPU number association logic is incomprehensible
and overly complex and needs to be kept around after boot instead of
completing this right after the APIC enumeration.
This update addresses these shortcomings with the following changes:
- Rework the CPUID evaluation code so it is common for all vendors and
provides information about the APIC ID segments in a uniform way
independent of the number of segments (Thread, Core, Module, ..., Die,
Package) so that this information can be computed instead of rewriting
global variables of dubious value over and over.
- A few cleanups and simplifcations of the APIC, IO/APIC and related
interfaces to prepare for the topology evaluation changes.
- Seperation of the parser stages so the early evaluation which tries to
find the APIC address can be seperately overridden from the late
evaluation which enumerates and registers the local APIC as further
preparation for sanitizing the topology evaluation.
- A new registration and admission logic which
- encapsulates the inner workings so that parsers and guest logic
cannot longer fiddle in it
- uses the APIC ID segments to build topology bitmaps at registration
time
- provides a sane admission logic
- allows to detect the crash kernel case, where CPU0 does not run on
the real BSP, automatically. This is required to prevent sending
INIT/SIPI sequences to the real BSP which would reset the whole
machine. This was so far handled by a tedious command line
parameter, which does not even work in nested crash scenarios.
- Associates CPU number after the enumeration completed and prevents
the late registration of APICs, which was somehow tolerated before.
- Converting all parsers and guest enumeration mechanisms over to the
new interfaces.
This allows to get rid of all global variable tweaking from the parsers
and enumeration mechanisms and sanitizes the XEN[PV] handling so it can
use CPUID evaluation for the first time.
- Mopping up existing sins by taking the information from the APIC ID
segment bitmaps.
This evaluates hybrid systems correctly on the boot CPU and allows for
cleanups and fixes in the related drivers, e.g. PERF.
The series has been extensively tested and the minimal late fallout due to
a broken ACPI/MADT table has been addressed by tightening the admission
logic further.
-----BEGIN PGP SIGNATURE-----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=/5oR
-----END PGP SIGNATURE-----
Merge tag 'x86-apic-2024-03-10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 APIC updates from Thomas Gleixner:
"Rework of APIC enumeration and topology evaluation.
The current implementation has a couple of shortcomings:
- It fails to handle hybrid systems correctly.
- The APIC registration code which handles CPU number assignents is
in the middle of the APIC code and detached from the topology
evaluation.
- The various mechanisms which enumerate APICs, ACPI, MPPARSE and
guest specific ones, tweak global variables as they see fit or in
case of XENPV just hack around the generic mechanisms completely.
- The CPUID topology evaluation code is sprinkled all over the vendor
code and reevaluates global variables on every hotplug operation.
- There is no way to analyze topology on the boot CPU before bringing
up the APs. This causes problems for infrastructure like PERF which
needs to size certain aspects upfront or could be simplified if
that would be possible.
- The APIC admission and CPU number association logic is
incomprehensible and overly complex and needs to be kept around
after boot instead of completing this right after the APIC
enumeration.
This update addresses these shortcomings with the following changes:
- Rework the CPUID evaluation code so it is common for all vendors
and provides information about the APIC ID segments in a uniform
way independent of the number of segments (Thread, Core, Module,
..., Die, Package) so that this information can be computed instead
of rewriting global variables of dubious value over and over.
- A few cleanups and simplifcations of the APIC, IO/APIC and related
interfaces to prepare for the topology evaluation changes.
- Seperation of the parser stages so the early evaluation which tries
to find the APIC address can be seperately overridden from the late
evaluation which enumerates and registers the local APIC as further
preparation for sanitizing the topology evaluation.
- A new registration and admission logic which
- encapsulates the inner workings so that parsers and guest logic
cannot longer fiddle in it
- uses the APIC ID segments to build topology bitmaps at
registration time
- provides a sane admission logic
- allows to detect the crash kernel case, where CPU0 does not run
on the real BSP, automatically. This is required to prevent
sending INIT/SIPI sequences to the real BSP which would reset
the whole machine. This was so far handled by a tedious command
line parameter, which does not even work in nested crash
scenarios.
- Associates CPU number after the enumeration completed and
prevents the late registration of APICs, which was somehow
tolerated before.
- Converting all parsers and guest enumeration mechanisms over to the
new interfaces.
This allows to get rid of all global variable tweaking from the
parsers and enumeration mechanisms and sanitizes the XEN[PV]
handling so it can use CPUID evaluation for the first time.
- Mopping up existing sins by taking the information from the APIC ID
segment bitmaps.
This evaluates hybrid systems correctly on the boot CPU and allows
for cleanups and fixes in the related drivers, e.g. PERF.
The series has been extensively tested and the minimal late fallout
due to a broken ACPI/MADT table has been addressed by tightening the
admission logic further"
* tag 'x86-apic-2024-03-10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (76 commits)
x86/topology: Ignore non-present APIC IDs in a present package
x86/apic: Build the x86 topology enumeration functions on UP APIC builds too
smp: Provide 'setup_max_cpus' definition on UP too
smp: Avoid 'setup_max_cpus' namespace collision/shadowing
x86/bugs: Use fixed addressing for VERW operand
x86/cpu/topology: Get rid of cpuinfo::x86_max_cores
x86/cpu/topology: Provide __num_[cores|threads]_per_package
x86/cpu/topology: Rename topology_max_die_per_package()
x86/cpu/topology: Rename smp_num_siblings
x86/cpu/topology: Retrieve cores per package from topology bitmaps
x86/cpu/topology: Use topology logical mapping mechanism
x86/cpu/topology: Provide logical pkg/die mapping
x86/cpu/topology: Simplify cpu_mark_primary_thread()
x86/cpu/topology: Mop up primary thread mask handling
x86/cpu/topology: Use topology bitmaps for sizing
x86/cpu/topology: Let XEN/PV use topology from CPUID/MADT
x86/xen/smp_pv: Count number of vCPUs early
x86/cpu/topology: Assign hotpluggable CPUIDs during init
x86/cpu/topology: Reject unknown APIC IDs on ACPI hotplug
x86/topology: Add a mechanism to track topology via APIC IDs
...
Add the ACPI HIDs and smi_node descriptions for the CS35L54 and CS35L57
Boosted Smart Amplifiers.
Signed-off-by: Simon Trimmer <simont@opensource.cirrus.com>
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Acked-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Message-ID: <20240308135900.603192-4-rf@opensource.cirrus.com>
Found with git grep 'MODULE_AUTHOR(".*([^)]*@'
Fixed with
sed -i '/MODULE_AUTHOR(".*([^)]*@/{s/ (/ </g;s/)"/>"/;s/)and/> and/}' \
$(git grep -l 'MODULE_AUTHOR(".*([^)]*@')
Also:
in drivers/media/usb/siano/smsusb.c normalise ", INC" to ", Inc";
this is what every other MODULE_AUTHOR for this company says,
and it's what the header says
in drivers/sbus/char/openprom.c normalise a double-spaced separator;
this is clearly copied from the copyright header,
where the names are aligned on consecutive lines thusly:
* Linux/SPARC PROM Configuration Driver
* Copyright (C) 1996 Thomas K. Dyas (tdyas@noc.rutgers.edu)
* Copyright (C) 1996 Eddie C. Dost (ecd@skynet.be)
but the authorship branding is single-line
Link: https://lkml.kernel.org/r/mk3geln4azm5binjjlfsgjepow4o73domjv6ajybws3tz22vb3@tarta.nabijaczleweli.xyz
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Cc: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
On the error path, assign -ENOMEM to ret when memory allocation of
"dev->prev_data" fails.
Fixes: e709615058 ("platform/x86/amd/pmf: Fixup error handling for amd_pmf_init_smart_pc()")
Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20240226144011.2100804-1-harshit.m.mogalapalli@oracle.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
On Goldmont p2sb_bar() only ever gets called for 2 devices, the actual P2SB
devfn 13,0 and the SPI controller which is part of the P2SB, devfn 13,2.
But the current p2sb code tries to cache BAR0 info for all of
devfn 13,0 to 13,7 . This involves calling pci_scan_single_device()
for device 13 functions 0-7 and the hw does not seem to like
pci_scan_single_device() getting called for some of the other hidden
devices. E.g. on an ASUS VivoBook D540NV-GQ065T this leads to continuous
ACPI errors leading to high CPU usage.
Fix this by only caching BAR0 info and thus only calling
pci_scan_single_device() for the P2SB and the SPI controller.
Fixes: 5913320eb0 ("platform/x86: p2sb: Allow p2sb_bar() calls during PCI device probe")
Reported-by: Danil Rybakov <danilrybakov249@gmail.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218531
Tested-by: Danil Rybakov <danilrybakov249@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20240304134356.305375-2-hdegoede@redhat.com
The WMI driver core already takes care that the WMI driver is
only bound to WMI devices with a matching GUID.
Remove the unnecessary call to wmi_has_guid(), which will always
be true when the driver probes.
Tested on a Dell Inspiron 3505.
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20240223162905.12416-1-W_Armin@gmx.de
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
This reverts commit 1a373d15e2.
The WMI core now takes care of draining the event queue if asus-wmi
is not loaded, so the hacky event queue handling code is not needed
anymore.
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20240219115919.16526-6-W_Armin@gmx.de
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
The ACPI WMI specification states:
"The _WED control method is evaluated by the mapper in
response to receiving a notification from a control
method."
This means that _WED should be evaluated unconditionally even
if no WMI event consumers are present.
Some firmware implementations actually depend on this behavior
by storing the event data inside a queue which will fill up if
the WMI core stops retrieving event data items due to no
consumers being present
Fix this by always evaluating _WED even if no WMI event consumers
are present.
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20240219115919.16526-4-W_Armin@gmx.de
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
WMI event drivers which do not have no_notify_data set expect
that each WMI event contains valid data. Evaluating _WED however
might return no data, which can cause issues with such drivers.
Fix this by validating that evaluating _WED did return data.
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20240219115919.16526-3-W_Armin@gmx.de
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
If a WMI event driver has no_notify_data set, then it indicates
support for WMI events which provide no notify data, otherwise
the notify() callback expects a valid ACPI object as notify data.
However if a WMI event driver which requires notify data is bound
to a WMI event device which cannot retrieve such data due to the
_WED ACPI method being absent, then the driver will be dysfunctional
since all WMI events will be dropped due to the missing notify data.
Fix this by not allowing such WMI event drivers to bind to WMI event
devices which do not support retrieving of notify data. Also reword
the description of no_notify_data a bit.
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20240219115919.16526-2-W_Armin@gmx.de
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
This patch adds battery charge control support on Fujitsu notebooks
via the S006 method of the FUJ02E3 ACPI device. With this method it's
possible to set charge_control_end_threshold between 50 and 100%.
Tested on Lifebook E5411 and Lifebook U728. Sadly I can't test this
patch on a dual battery one, but I didn't find any clue about
independent battery charge control on dual battery Fujitsu notebooks
either. And by that I mean checking the DSDT table of various Lifebook
notebooks and reverse engineering FUJ02E3.dll.
Signed-off-by: Szilard Fabian <szfabian@bluemarch.art>
Acked-by: Jonathan Woithe <jwoithe@just42.net>
Link: https://lore.kernel.org/r/20240215203012.228758-2-szfabian@bluemarch.art
[ij: coding style cleanups.]
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
All of the thermal_zone_device_register_with_trips() callers pass zero
writable trip points masks to it, so drop the mask argument from that
function and update all of its callers accordingly.
This also removes the artificial trip points per zone limit of 32,
related to using writable trip points masks.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Randomly a Lenovo Z13 will trigger a kernel warning traceback from this
condition:
```
if (WARN_ON((profile < 0) || (profile >= ARRAY_SIZE(profile_names))))
```
This happens because thinkpad-acpi always assumes that
convert_dytc_to_profile() successfully updated the profile. On the
contrary a condition can occur that when dytc_profile_refresh() is called
the profile doesn't get updated as there is a -EOPNOTSUPP branch.
Catch this situation and avoid updating the profile. Also log this into
dynamic debugging in case any other modes should be added in the future.
Fixes: c3bfcd4c67 ("platform/x86: thinkpad_acpi: Add platform profile support")
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20240217022311.113879-1-mario.limonciello@amd.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Commit 14c200b7ca ("platform/x86: intel-vbtn: Fix missing
tablet-mode-switch events") causes 2 issues on the ThinkPad X1 Tablet Gen2:
1. The ThinkPad will wake up immediately from suspend
2. When put in tablet mode SW_TABLET_MODE reverts to 0 after about 1 second
Both these issues are caused by the "VBDL" ACPI method call added
at the end of the notify_handler.
And it never became entirely clear if this call is even necessary to fix
the issue of missing tablet-mode-switch events on the Dell Inspiron 7352.
Drop the "VBDL" ACPI method call again to fix the 2 issues this is
causing on the ThinkPad X1 Tablet Gen2.
Fixes: 14c200b7ca ("platform/x86: intel-vbtn: Fix missing tablet-mode-switch events")
Reported-by: Alexander Kobel <a-kobel@a-kobel.de>
Closes: https://lore.kernel.org/platform-driver-x86/295984ce-bd4b-49bd-adc5-ffe7c898d7f0@a-kobel.de/
Cc: regressions@lists.linux.dev
Cc: Arnold Gozum <arngozum@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Tested-by: Alexander Kobel <a-kobel@a-kobel.de>
Link: https://lore.kernel.org/r/20240216203300.245826-1-hdegoede@redhat.com
The Acer B1 750 tablet used a Novatek NVT-ts touchscreen,
not a Goodix touchscreen.
Rename acer_b1_750_goodix_gpios to acer_b1_750_nvt_ts_gpios
to correctly reflect this.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20240216201721.239791-5-hdegoede@redhat.com
After commit b286f4e87e ("serial: core: Move tty and serdev to be
children of serial core port device") x86_instantiate_serdev() no longer
works due to the serdev-controller-device moving in the device hierarchy
from (e.g.) /sys/devices/pci0000:00/8086228A:00/serial0 to
/sys/devices/pci0000:00/8086228A:00/8086228A:00:0/8086228A:00:0.0/serial0
Use the new get_serdev_controller() helper function to fix this.
Fixes: b286f4e87e ("serial: core: Move tty and serdev to be children of serial core port device")
Cc: Tony Lindgren <tony@atomide.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20240216201721.239791-4-hdegoede@redhat.com
In some cases UART attached devices which require an in kernel driver,
e.g. UART attached Bluetooth HCIs are described in the ACPI tables
by an ACPI device with a broken or missing UartSerialBusV2() resource.
This causes the kernel to create a /dev/ttyS# char-device for the UART
instead of creating an in kernel serdev-controller + serdev-device pair
for the in kernel driver.
The quirk handling in acpi_quirk_skip_serdev_enumeration() makes the kernel
create a serdev-controller device for these UARTs instead of a /dev/ttyS#.
Instantiating the actual serdev-device to bind to is up to pdx86 code,
so far this was handled by the x86-android-tablets code. But since
commit b286f4e87e ("serial: core: Move tty and serdev to be children of
serial core port device") the serdev-controller device has moved in the
device hierarchy from (e.g.) /sys/devices/pci0000:00/8086228A:00/serial0 to
/sys/devices/pci0000:00/8086228A:00/8086228A:00:0/8086228A:00:0.0/serial0 .
This makes this a bit trickier to do and another driver is in the works
which will also need this functionality.
Add a new helper to get the serdev-controller device, so that the new
code for this can be shared.
Fixes: b286f4e87e ("serial: core: Move tty and serdev to be children of serial core port device")
Cc: Tony Lindgren <tony@atomide.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20240216201721.239791-3-hdegoede@redhat.com
After commit 4014ae236b ("platform/x86: x86-android-tablets: Stop using
gpiolib private APIs") the touchscreen in the keyboard half of
the Lenovo Yogabook1 X90 stopped working with the following error:
Goodix-TS i2c-goodix_ts: error -EBUSY: Failed to get irq GPIO
The problem is that when getting the IRQ for instantiated i2c_client-s
from a GPIO (rather then using an IRQ directly from the IOAPIC),
x86_acpi_irq_helper_get() now properly requests the GPIO, which disallows
other drivers from requesting it. Normally this is a good thing, but
the goodix touchscreen also uses the IRQ as an output during reset
to select which of its 2 possible I2C addresses should be used.
Add a new free_gpio flag to struct x86_acpi_irq_data to deal with this
and release the GPIO after getting the IRQ in this special case.
Fixes: 4014ae236b ("platform/x86: x86-android-tablets: Stop using gpiolib private APIs")
Cc: stable@vger.kernel.org
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20240216201721.239791-2-hdegoede@redhat.com
Added non-standard thermal register's support for some ThinkPads.
Some of the Thinkpads use a non-standard ECFW which has different
thermal register addresses. This is a fix to correct the wrong temperature
reporting on those systems.
Tested on Lenovo ThinkPad L13 Yoga Gen2.
Suggested-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Signed-off-by: Vishnu Sankar <vishnuocv@gmail.com>
Link: https://lore.kernel.org/r/20240215134102.25118-2-vishnuocv@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Add a thermal_read_mode_check helper to make the code
simpler during init. This helps particularly when the new
TPACPI_THERMAL_TPEC_12 mode is added in the next patch.
Suggested-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Vishnu Sankar <vishnuocv@gmail.com>
Link: https://lore.kernel.org/r/20240215134102.25118-1-vishnuocv@gmail.com
[ij: Reflowed the comment to 80 cols, multiline if braces, added __init.]
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
amd_pmf_init_smart_pc() calls out to amd_pmf_get_bios_buffer() but
the error handling flow doesn't clean everything up allocated
memory.
As amd_pmf_get_bios_buffer() is only called by amd_pmf_init_smart_pc(),
fold it into the function and add labels to clean up any step that
can fail along the way. Explicitly set everything allocated to NULL as
there are other features that may access some of the same variables.
Fixes: 7c45534afa ("platform/x86/amd/pmf: Add support for PMF Policy Binary")
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20240217014107.113749-3-mario.limonciello@amd.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
If a machine advertises Smart PC support but is missing policy data
show a debugging message to help clarify why Smart PC wasn't enabled.
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20240217014107.113749-2-mario.limonciello@amd.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
TEE enact command failures are seen after each suspend/resume cycle;
fix this by cancelling the policy builder workqueue before going into
suspend and reschedule the workqueue after resume.
[ 629.516792] ccp 0000:c2:00.2: tee: command 0x5 timed out, disabling PSP
[ 629.516835] amd-pmf AMDI0102:00: TEE enact cmd failed. err: ffff000e, ret:0
[ 630.550464] amd-pmf AMDI0102:00: AMD_PMF_REGISTER_RESPONSE:1
[ 630.550511] amd-pmf AMDI0102:00: AMD_PMF_REGISTER_ARGUMENT:7
[ 630.550548] amd-pmf AMDI0102:00: AMD_PMF_REGISTER_MESSAGE:16
Fixes: ae82cef7d9 ("platform/x86/amd/pmf: Add support for PMF-TA interaction")
Co-developed-by: Patil Rajesh Reddy <Patil.Reddy@amd.com>
Signed-off-by: Patil Rajesh Reddy <Patil.Reddy@amd.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20240216064112.962582-2-Shyam-sundar.S-k@amd.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Improve code readability by removing smart_pc_status enum, as the same
can be done with a simple true/false check; Update the code checks
accordingly.
Also add a missing return on amd_pmf_init_smart_pc() success,
to skip trying to setup the auto / slider modes which should
not be used in this case.
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20240216064112.962582-1-Shyam-sundar.S-k@amd.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Now that prefix matches for ACPI names are supported, the ts_dmi_data
structs for "GDIX1001:00" and "GDIX1001:01" can be consolidated into
a single match matching on "GDIX1001".
For consistency also change gdix1002_00_upside_down_data to match.
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20240212120608.30469-2-hdegoede@redhat.com
On some devices the ACPI name of the touchscreen is e.g. either
MSSL1680:00 or MSSL1680:01 depending on the BIOS version.
This happens for example on the "Chuwi Hi8 Air" tablet where the initial
commit's ts_data uses "MSSL1680:00" but the tablets from the github issue
and linux-hardware.org probe linked below both use "MSSL1680:01".
Replace the strcmp() match on ts_data->acpi_name with a strstarts()
check to allow using a partial match on just the ACPI HID of "MSSL1680"
and change the ts_data->acpi_name for the "Chuwi Hi8 Air" accordingly
to fix the touchscreen not working on models where it is "MSSL1680:01".
Note this drops the length check for I2C_NAME_SIZE. This never was
necessary since the ACPI names used are never more then 11 chars and
I2C_NAME_SIZE is 20 so the replaced strncmp() would always stop long
before reaching I2C_NAME_SIZE.
Link: https://linux-hardware.org/?computer=AC4301C0542A
Fixes: bbb97d728f ("platform/x86: touchscreen_dmi: Add info for the Chuwi Hi8 Air tablet")
Closes: https://github.com/onitake/gsl-firmware/issues/91
Cc: stable@vger.kernel.org
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20240212120608.30469-1-hdegoede@redhat.com
Since commit 7a36b901a6 ("ACPI: OSL: Use a threaded interrupt handler
for SCI") the ACPI OSL code passes IRQF_ONESHOT when requesting the SCI.
Since the INT0002 GPIO is typically shared with the ACPI SCI the INT0002
driver must pass the same flags.
This fixes the INT0002 driver failing to probe due to following error +
as well as removing the backtrace that follows this error:
"genirq: Flags mismatch irq 9. 00000084 (INT0002) vs. 00002080 (acpi)"
Fixes: 7a36b901a6 ("ACPI: OSL: Use a threaded interrupt handler for SCI")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20240210110149.12803-1-hdegoede@redhat.com
The Lenovo workstations require the password opcode to be run before
the attribute value is changed (if Admin password is enabled).
Tested on some Thinkpads to confirm they are OK with this order too.
Signed-off-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Fixes: 640a5fa50a ("platform/x86: think-lmi: Opcode support")
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20240209152359.528919-1-mpearson-lenovo@squebb.ca
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
The ACPI-WMI specification declares in the section "ACPI Control Method
Naming Conventions and Functionality for Windows 2000 Instrumentation"
that a WMxx control method takes 3 arguments: instance, method id and
argument buffer. This is also the case even when the underlying WMI
method does not have any input arguments.
So if a WMI driver evaluates a WMI method without passing an input
buffer, ACPICA will log a warning complaining that the third argument
is missing.
Prevent this by checking that a input buffer was passed, and return
an error if this was not the case.
Tested on a Asus PRIME B650-Plus.
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20240212185016.5494-1-W_Armin@gmx.de
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Highlights:
- WMI bus driver fixes
- Second attempt (previously reverted) at P2SB PCI rescan deadlock fix
- AMD PMF driver improvements
- MAINTAINERS updates
- Misc. other small fixes and hw-id additions
The following is an automated git shortlog grouped by driver:
MAINTAINERS:
- remove defunct acpi4asus project info from asus notebooks section
- add Luke Jones as maintainer for asus notebooks
- Remove Perry Yuan as DELL WMI HARDWARE PRIVACY SUPPORT maintainer
intel-uncore-freq:
- Fix types in sysfs callbacks
intel-wmi-sbl-fw-update:
- Fix function name in error message
p2sb:
- Use pci_resource_n() in p2sb_read_bar0()
- Allow p2sb_bar() calls during PCI device probe
platform/mellanox:
- mlxbf-pmc: Fix offset calculation for crspace events
- mlxbf-tmfifo: Drop Tx network packet when Tx TmFIFO is full
platform/x86/amd/pmf:
- Fix memory leak in amd_pmf_get_pb_data()
- Get ambient light information from AMD SFH driver
- Get Human presence information from AMD SFH driver
platform/x86/intel/ifs:
- Call release_firmware() when handling errors.
silicom-platform:
- Add missing "Description:" for power_cycle sysfs attr
touchscreen_dmi:
- Add info for the TECLAST X16 Plus tablet
wmi:
- Fix wmi_dev_probe()
- Fix notify callback locking
- Decouple legacy WMI notify handlers from wmi_block_list
- Return immediately if an suitable WMI event is found
- Fix error handling in legacy WMI notify handler functions
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEEuvA7XScYQRpenhd+kuxHeUQDJ9wFAmW1JScUHGhkZWdvZWRl
QHJlZGhhdC5jb20ACgkQkuxHeUQDJ9xNVwf/YXSuNEw+ztLH0pEySBUATHrcIbO7
gOpW2ZISf6IzRe7HFw7Ea1IJxrvysPn8VEribT3Sot9Ka+Pzd6H/TVA64sfyE7oG
wEke2Uxpnfie65Yo2IYNADhfLTOyAL7mvchScQz5hTE+gBq5Fdac2ykK+ox1dpTs
BqPg1/yG06L1SRX2Id0UNNYGMBsmjUH6v2b+M8Rcba+qcdznGMRe7l8T1Q2fY+nl
P6+tz3rYdfrGn1j+35Wo2bgKaB8l6rrtOscIvpke+CxZ95+6UxqZfLOBCg8u/njA
QbWqfZGjmbRGrbNo4C3fAHjj6SzQNyNfsm4gd4eJzl8X1CR9gzM8kb/xmg==
=yoe7
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQSCSUwRdwTNL2MhaBlZrE9hU+XOMQUCZcTBOwAKCRBZrE9hU+XO
MWqxAQCI45uMAAJyya3FEVUaUNO1fgC1q8gIG9KoRMACys+HnAEAzR9JNjQOJ8g2
ccMpCtfVJxxlBJw3U8L6p+2FWkrt5gU=
=5exp
-----END PGP SIGNATURE-----
Merge tag 'platform-drivers-x86-v6.8-2' into pdx/for-next
Merge tag 'platform-drivers-x86-v6.8-2' fixes into pdf86/for-next
because of WMI fixes. The WMI changes done in for-next already created
a minor conflict with the fixes and WMI is actively being improved
currently so besides resolving the current conflict, this is also to
avoid further conflicts.
Using dev_err() allows users to find out from which
device the error message came from.
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20240206220447.3102-4-W_Armin@gmx.de
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
If kzalloc() fails, an out-of-memory message is already
printed. Remove the unnecessary second warning message.
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20240206220447.3102-3-W_Armin@gmx.de
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
A missing WQxx control method is a firmware bug and should be
marked as such using FW_BUG so that users know that the issue
is not a kernel issue.
Since get_subobj_info() might fail even if the control method
is present, we need to print the warning only if acpi_get_handle()
fails.
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20240206220447.3102-2-W_Armin@gmx.de
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Some devices like the MSI GF63-12VF contain WMI method blocks
without providing the necessary WMxx ACPI control methods.
Avoid creating WMI devices for such WMI method blocks since
the resulting WMI device is going to be unusable.
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20240206220447.3102-1-W_Armin@gmx.de
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Now that the driver core can properly handle constant struct bus_type,
move the rtl_subsys variable to be a constant structure as well,
placing it into read-only memory which can not be modified at runtime.
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: "Ricardo B. Marliere" <ricardo@marliere.net>
Link: https://lore.kernel.org/r/20240204-bus_cleanup-platform-drivers-x86-v1-2-1f0839b385c6@marliere.net
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Now that the driver core can properly handle constant struct bus_type,
move the wmi_bus_type variable to be a constant structure as well,
placing it into read-only memory which can not be modified at runtime.
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: "Ricardo B. Marliere" <ricardo@marliere.net>
Reviewed-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20240204-bus_cleanup-platform-drivers-x86-v1-1-1f0839b385c6@marliere.net
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Add 8BAD to the list of boards which have thermal profile selection
available. This allows the CPU to draw more power than the default TDP
barrier defined by the 'balanced' thermal profile (around 50W), hence
allowing it to perform better without being throttled by the embedded
controller (around 130W).
We first need to set the HP_OMEN_EC_THERMAL_PROFILE_TIMER_OFFSET to zero.
This prevents the timer countdown from reaching zero, making the embedded
controller "force-switch" the system's thermal profile back to 'balanced'
automatically.
We also need to put a number of specific flags in
HP_OMEN_EC_THERMAL_PROFILE_FLAGS_OFFSET when we're switching to another
thermal profile:
- for 'performance', we need to set both HP_OMEN_EC_FLAGS_TURBO and
HP_OMEN_EC_FLAGS_NOTIMER;
- for 'balanced' and 'powersave', we clear out the register to notify
the system that we want to lower the TDP barrier as soon as possible.
The third flag defined in the hp_thermal_profile_omen_flags enum,
HP_OMEN_EC_FLAGS_JUSTSET, is present for completeness.
To prevent potential behaviour breakage with other Omen models, a
separate omen_timed_thermal_profile_boards array has been added to list
which boards expose this behaviour.
Performance benchmarking was done with the help of silver.urih.com and
Google Chrome 120.0.6099.129, on Gnome 45.2, with the 'performance'
thermal profile set:
| | Performance | Stress | TDP |
|------------------|-------------|------------|-------|
| with my patch | P84549 | S0.1891 | 131W |
| without my patch | P44084 | S0.1359 | 47W |
The TDP measurements were done with the help of the s-tui utility,
during the load.
There is still work to be done:
- tune the CPU and GPU fans to better cool down and enhance
performance at the right time; right now, it seems that the fans are
not properly reacting to thermal/performance events, which in turn
either causes thermal throttling OR makes the fans spin way too long,
even though the temperatures have lowered down
- expose the CPU and GPU fan curves to user-land so that they can be
controlled just like what the Omen Gaming Hub utility proposes to
its users;
Signed-off-by: Alexis Belmonte <alexbelm48@gmail.com>
Link: https://lore.kernel.org/r/ZbucvX2rRdqRgtcu@alexis-pc
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
This commit performs four things:
- fix up the GUID string inconsistency (lower case 'e') from the
WMI module alias declaration/macro definition
- separate GUID macros from the embedded controller offset macros
- rename the description of the module to better represent what it
actually achieves as a whole
- add a space right before the '*' pointer qualifier to match the
other array declarations
This also prepares the terrain for integrating support work for boards
identified as '8BAD', which corresponds to HP's Omen 17 ck2xxx models.
Signed-off-by: Alexis Belmonte <alexbelm48@gmail.com>
Link: https://lore.kernel.org/r/ZbucrKh36sNxeyfX@alexis-pc
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
When an ACPI netlink event is received by acpid, the ACPI device
class is passed as its first argument. But since the class string
is not initialized during probe, an empty string is being passed:
netlink: PNP0C14:01 000000d0 00000000
Fix this by passing a static string instead.
Tested on a Dell Inspiron 3505.
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20240130221942.2770-1-W_Armin@gmx.de
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
The activation for Scan at Field (SAF) includes a parameter to make
microcode wait for both threads to join. It's preferable to perform an
entry rendezvous before the activation to ensure that they start the
`wrmsr` close enough to each other. In some cases it has been observed
that one of the threads might be just a bit late to arrive. An entry
rendezvous reduces the likelihood of these cases occurring.
Add an entry rendezvous to ensure the activation on both threads happen
close enough to each other.
Signed-off-by: Ashok Raj <ashok.raj@intel.com>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Link: https://lore.kernel.org/r/20240125082254.424859-6-ashok.raj@intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
ARRAY_BIST requires the test to be invoked only from one of the HT
siblings of a core. If the other sibling was in mwait(), that didn't
permit the test to complete and resulted in several retries before the
test could finish.
The exit rendezvous was introduced to keep the HT sibling busy until
the primary CPU completed the test to avoid those retries. What is
actually needed is to ensure that both the threads rendezvous *before*
the wrmsr to trigger the test to give good chance to complete the test.
The `stop_machine()` function returns only after all the CPUs complete
running the function, and provides an exit rendezvous implicitly.
In kernel/stop_machine.c::multi_cpu_stop(), every CPU in the mask
needs to complete reaching MULTI_STOP_RUN. When all CPUs complete, the
state machine moves to next state, i.e MULTI_STOP_EXIT. Thus the
underlying API stop_core_cpuslocked() already provides an exit
rendezvous.
Add the rendezvous earlier in order to ensure the wrmsr is triggered
after all CPUs reach the do_array_test(). Remove the exit rendezvous
since stop_core_cpuslocked() already guarantees that.
Signed-off-by: Ashok Raj <ashok.raj@intel.com>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Link: https://lore.kernel.org/r/20240125082254.424859-5-ashok.raj@intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Add the current batch number in the trace output. When there are
failures, it's important to know which test content resulted in failure.
# TASK-PID CPU# ||||| TIMESTAMP FUNCTION
# | | | ||||| | |
migration/0-18 [000] d..1. 527287.084668: ifs_status: batch: 02, start: 0000, stop: 007f, status: 0000000000007f80
migration/128-785 [128] d..1. 527287.084669: ifs_status: batch: 02, start: 0000, stop: 007f, status: 0000000000007f80
Signed-off-by: Ashok Raj <ashok.raj@intel.com>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Link: https://lore.kernel.org/r/20240125082254.424859-4-ashok.raj@intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Enable the trace function on all HT threads. Currently, the trace is
called from some arbitrary CPU where the test was invoked.
This change gives visibility to the exact errors as seen by each
participating HT threads, and not just what was seen from the primary
thread.
Sample output below.
# TASK-PID CPU# ||||| TIMESTAMP FUNCTION
# | | | ||||| | |
migration/0-18 [000] d..1. 527287.084668: start: 0000, stop: 007f, status: 0000000000007f80
migration/128-785 [128] d..1. 527287.084669: start: 0000, stop: 007f, status: 0000000000007f80
Signed-off-by: Ashok Raj <ashok.raj@intel.com>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Link: https://lore.kernel.org/r/20240125082254.424859-3-ashok.raj@intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Use the standard array allocation variant of devm memory allocation
APIs.
Signed-off-by: Suma Hegde <suma.hegde@amd.com>
Signed-off-by: Naveen Krishna Chatradhi <nchatrad@amd.com>
Link: https://lore.kernel.org/r/20240125125401.597617-1-suma.hegde@amd.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
AMD supports connecting up to 8 AMD EPYCs in a system.
Hence, verify the num_sockets returned from amd_nb_num().
Also remove the WARN_ON() since the num_sockets is already verified.
Signed-off-by: Suma Hegde <suma.hegde@amd.com>
Reviewed-by: Naveen Krishna Chatradhi <nchatrad@amd.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20240106022532.1746932-9-suma.hegde@amd.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
AMD EPYC family 0x1A and Model 0x0-0xF are having different
mailbox message ID offset compared to previous
platforms. In case of ACPI based BIOS, this information will be read
from ACPI table, for non-ACPI BIOS, this needs to be #defined.
Signed-off-by: Suma Hegde <suma.hegde@amd.com>
Signed-off-by: Naveen Krishna Chatradhi <nchatrad@amd.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20240106022532.1746932-8-suma.hegde@amd.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
ACPI table provides mailbox base address and register offset
information. The base address is provided as part of CRS method
and mailbox offsets are provided through DSD table.
Sockets are differentiated by UIDs.
Signed-off-by: Suma Hegde <suma.hegde@amd.com>
Signed-off-by: Naveen Krishna Chatradhi <nchatrad@amd.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20240106022532.1746932-7-suma.hegde@amd.com
[ij: Removed extra parenthesis.]
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Split the creation of array of attribute groups and array of attributes
into different functions. This will ease the ACPI support.
Signed-off-by: Suma Hegde <suma.hegde@amd.com>
Signed-off-by: Naveen Krishna Chatradhi <nchatrad@amd.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20240106022532.1746932-6-suma.hegde@amd.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
On an ACPI enabled platforms the probe is called for each socket
and the struct dev is different for each socket. This change
will help in handling both ACPI and non-ACPI platforms.
Also change pr_err() to dev_err() API.
Signed-off-by: Suma Hegde <suma.hegde@amd.com>
Signed-off-by: Naveen Krishna Chatradhi <nchatrad@amd.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20240106022532.1746932-5-suma.hegde@amd.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Add touch screen info for TECLAST X16 Plus tablet.
Signed-off-by: Phoenix Chen <asbeltogf@gmail.com>
Link: https://lore.kernel.org/r/20240126095308.5042-1-asbeltogf@gmail.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Missing release_firmware() due to error handling blocked any future image
loading.
Fix the return code and release_fiwmare() to release the bad image.
Fixes: 25a76dbb36 ("platform/x86/intel/ifs: Validate image size")
Reported-by: Pengfei Xu <pengfei.xu@intel.com>
Signed-off-by: Jithu Joseph <jithu.joseph@intel.com>
Signed-off-by: Ashok Raj <ashok.raj@intel.com>
Tested-by: Pengfei Xu <pengfei.xu@intel.com>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20240125082254.424859-2-ashok.raj@intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
amd_pmf_get_pb_data() will allocate memory for the policy buffer,
but does not free it if copy_from_user() fails. This leads to a memory
leak.
Fixes: 10817f28e5 ("platform/x86/amd/pmf: Add capability to sideload of policy binary")
Reviewed-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Signed-off-by: Cong Liu <liucong2@kylinos.cn>
Link: https://lore.kernel.org/r/20240124012939.6550-1-liucong2@kylinos.cn
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
AMD SFH driver has APIs defined to export the ambient light information;
use this within the PMF driver to send inputs to the PMF TA, so that PMF
driver can enact to the actions coming from the TA.
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20240123141458.3715211-2-Shyam-sundar.S-k@amd.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
AMD SFH driver has APIs defined to export the human presence information;
use this within the PMF driver to send inputs to the PMF TA, so that PMF
driver can enact to the actions coming from the TA.
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20240123141458.3715211-1-Shyam-sundar.S-k@amd.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Define struct hsmp_mbaddr_info with register offsets and populate
them during probe, which avoids the usage of macros in core functions.
During ACPI probe, the same fields can be populated from ACPI table.
Also move plat dev init to a static function.
Signed-off-by: Suma Hegde <suma.hegde@amd.com>
Signed-off-by: Naveen Krishna Chatradhi <nchatrad@amd.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20240106022532.1746932-4-suma.hegde@amd.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Create a static function and call platform device alloc and add device,
which will simplify handling acpi and plat device probing.
Signed-off-by: Suma Hegde <suma.hegde@amd.com>
Signed-off-by: Naveen Krishna Chatradhi <nchatrad@amd.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20240106022532.1746932-3-suma.hegde@amd.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Cache pci_dev obj during probe as part of struct hsmp_socket
and use in amd_hsmp_rdwr(). This change will make it easier to
support both non-ACPI and ACPI devices.
Also add a check for sock_index agsint number of sockets
in the hsmp_send_message().
Signed-off-by: Suma Hegde <suma.hegde@amd.com>
Signed-off-by: Naveen Krishna Chatradhi <nchatrad@amd.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20240106022532.1746932-2-suma.hegde@amd.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
This is in advance to supporting ACPI based probe.
In case of non-ACPI driver, hsmp_test() can be
performed either in plat init() or in probe().
however, in case of ACPI probing, hsmp_test() cannot
be called in init(), as the mailbox reg offsets and
base addresses are read from ACPI table in the probe().
Hence, move hsmp_test() to probe as preparation for
ACPI support.
Also use hsmp_send_message() directly in hsmp_test()
as the semaphore is already initialized in probe.
Signed-off-by: Suma Hegde <suma.hegde@amd.com>
Signed-off-by: Naveen Krishna Chatradhi <nchatrad@amd.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20240106022532.1746932-1-suma.hegde@amd.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
The device name inside the ACPI netlink event is limited to
15 characters, so the WMI device name will get truncated.
This can be observed with kacpimon when receiving an event
from WMI device "9DBB5994-A997-11DA-B012-B622A1EF5492":
netlink: 9DBB5994-A997- 000000d0 00000000
Fix this by using the shorter device name from the ACPI
bus device instead. This still allows users to uniquely
identify the WMI device by using the notify id (0xd0).
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20240121200824.2778-1-W_Armin@gmx.de
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
New Thinkpads have added a 'Mode' Function key that on Windows allows
you to choose the active profile (low-power, balanced, performance)
Added suppoort for this hotkey (F8), and have it cycle through the
options available.
Tested on X1 Carbon G12.
Signed-off-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20240120232949.317337-1-mpearson-lenovo@squebb.ca
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Since 64f67b5240 ("leds: trigger: audio: Add an activate callback to
ensure the initial brightness is set") the audio triggers have an
activate callback which sets the LED brightness as soon as the
(default) trigger is bound to the LED device. So we can remove the
call to ledtrig_audio_get.
Positive side effect: There's no code dependency to ledtrig-audio any
longer, what allows to remove some Kconfig dependencies.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/daef7331-dcb4-4b3a-802e-656629486b4c@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
The error message in this code can't be reached because value is either
zero or non-zero. There isn't a third option. Really, it's nicer to
write this as a one liner.
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/a58bffb7-0a8b-4195-b273-f65a188ace7b@moroto.mountain
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
The variable i is being initialized with the value 0 that is never
read, it is being re-assigned 0 again in a for-loop statement later
on. The initialization is redundant and can be removed.
The initialization of variable n can also be deferred after the
sanity check on pointer n and the declaration of all the int variables
can be combined as a final code clear-up.
Cleans up clang scan build warning:
warning: Value stored to 'i' is never read [deadcode.DeadStores]
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20240106154740.55202-1-colin.i.king@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Since when the driver was converted to use the bus-based WMI
interface, the old GUID-based WMI functions are not used anymore.
Update the error message to avoid confusing users.
Compile-tested only.
Fixes: 75c487fcb6 ("platform/x86: intel-wmi-sbl-fw-update: Use bus-based WMI interface")
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20240106224126.13803-1-W_Armin@gmx.de
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Accesses to resource[] member of struct pci_dev shall be wrapped with
pci_resource_n() for future compatibility. Call the helper function in
p2sb_read_bar0().
Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Link: https://lore.kernel.org/r/20240108062059.3583028-3-shinichiro.kawasaki@wdc.com
Tested-by Klara Modin <klarasmodin@gmail.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
p2sb_bar() unhides P2SB device to get resources from the device. It
guards the operation by locking pci_rescan_remove_lock so that parallel
rescans do not find the P2SB device. However, this lock causes deadlock
when PCI bus rescan is triggered by /sys/bus/pci/rescan. The rescan
locks pci_rescan_remove_lock and probes PCI devices. When PCI devices
call p2sb_bar() during probe, it locks pci_rescan_remove_lock again.
Hence the deadlock.
To avoid the deadlock, do not lock pci_rescan_remove_lock in p2sb_bar().
Instead, do the lock at fs_initcall. Introduce p2sb_cache_resources()
for fs_initcall which gets and caches the P2SB resources. At p2sb_bar(),
refer the cache and return to the caller.
Before operating the device at P2SB DEVFN for resource cache, check
that its device class is PCI_CLASS_MEMORY_OTHER 0x0580 that PCH
specifications define. This avoids unexpected operation to other devices
at the same DEVFN.
Link: https://lore.kernel.org/linux-pci/6xb24fjmptxxn5js2fjrrddjae6twex5bjaftwqsuawuqqqydx@7cl3uik5ef6j/
Fixes: 9745fb0747 ("platform/x86/intel: Add Primary to Sideband (P2SB) bridge support")
Cc: stable@vger.kernel.org
Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Link: https://lore.kernel.org/r/20240108062059.3583028-2-shinichiro.kawasaki@wdc.com
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Tested-by Klara Modin <klarasmodin@gmail.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
When booting a kernel with CONFIG_CFI_CLANG, there is a CFI failure when
accessing any of the values under
/sys/devices/system/cpu/intel_uncore_frequency/package_00_die_00:
$ cat /sys/devices/system/cpu/intel_uncore_frequency/package_00_die_00/max_freq_khz
fish: Job 1, 'cat /sys/devices/system/cpu/int…' terminated by signal SIGSEGV (Address boundary error)
$ sudo dmesg &| grep 'CFI failure'
[ 170.953925] CFI failure at kobj_attr_show+0x19/0x30 (target: show_max_freq_khz+0x0/0xc0 [intel_uncore_frequency_common]; expected type: 0xd34078c5
The sysfs callback functions such as show_domain_id() are written as if
they are going to be called by dev_attr_show() but as the above message
shows, they are instead called by kobj_attr_show(). kCFI checks that the
destination of an indirect jump has the exact same type as the prototype
of the function pointer it is called through and fails when they do not.
These callbacks are called through kobj_attr_show() because
uncore_root_kobj was initialized with kobject_create_and_add(), which
means uncore_root_kobj has a ->sysfs_ops of kobj_sysfs_ops from
kobject_create(), which uses kobj_attr_show() as its ->show() value.
The only reason there has not been a more noticeable problem until this
point is that 'struct kobj_attribute' and 'struct device_attribute' have
the same layout, so getting the callback from container_of() works the
same with either value.
Change all the callbacks and their uses to be compatible with
kobj_attr_show() and kobj_attr_store(), which resolves the kCFI failure
and allows the sysfs files to work properly.
Closes: https://github.com/ClangBuiltLinux/linux/issues/1974
Fixes: ae7b2ce578 ("platform/x86/intel/uncore-freq: Use sysfs API to create attributes")
Cc: stable@vger.kernel.org
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Sami Tolvanen <samitolvanen@google.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Link: https://lore.kernel.org/r/20240104-intel-uncore-freq-kcfi-fix-v1-1-bf1e8939af40@kernel.org
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
This has a reversed if statement so it accidentally disables the wmi
method before returning.
Fixes: 704af3a407 ("platform/x86: wmi: Remove chardev interface")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/9c81251b-bc87-4ca3-bb86-843dc85e5145@moroto.mountain
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
When an legacy WMI event handler is removed, an WMI event could
have called the handler just before it was removed, meaning the
handler could still be running after wmi_remove_notify_handler()
returns.
Something similar could also happens when using the WMI bus, as
the WMI core might still call the notify() callback from an WMI
driver even if its remove() callback was just called.
Fix this by introducing a rw semaphore which ensures that the
event state of a WMI device does not change while the WMI core
is handling an event for it.
Tested on a Dell Inspiron 3505 and a Acer Aspire E1-731.
Fixes: 1686f54445 ("platform/x86: wmi: Incorporate acpi_install_notify_handler")
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20240103192707.115512-5-W_Armin@gmx.de
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Until now, legacy WMI notify handler functions where using the
wmi_block_list, which did no refcounting on the returned WMI device.
This meant that the WMI device could disappear at any moment,
potentially leading to various errors.
Fix this by using bus_find_device() which returns an actual
reference to the found WMI device.
Tested on a Dell Inspiron 3505 and a Acer Aspire E1-731.
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20240103192707.115512-4-W_Armin@gmx.de
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
