IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
If zram-generator package is installed and works, then we can not remove
zram module because zram swap is being used. This case needs a clean zram
environment, change this test by using hot_add/hot_remove interface. So
even zram device is being used, we still can add zram device and remove
them in cleanup.
The two interface was introduced since kernel commit 6566d1a32bf7("zram:
add dynamic device add/remove functionality") in v4.2-rc1. If kernel
supports these two interface, we use hot_add/hot_remove to slove this
problem, if not, just check whether zram is being used or built in, then
skip it on old kernel.
Signed-off-by: Yang Xu <xuyang2018.jy@fujitsu.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Since commit 43209ea2d17a ("zram: remove max_comp_streams internals"), zram
has switched to per-cpu streams. Even kernel still keep this interface for
some reasons, but writing to max_comp_stream doesn't take any effect. So
skip it on newer kernel ie 4.7.
The code that comparing kernel version is from xfstests testsuite ext4/053.
Signed-off-by: Yang Xu <xuyang2018.jy@fujitsu.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Based on 1 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license as published by
the free software foundation either version 2 of the license or at
your option any later version this program is distributed in the
hope that it would be useful but without any warranty without even
the implied warranty of merchantability or fitness for a particular
purpose see the gnu general public license for more details
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-or-later
has been chosen to replace the boilerplate/reference in 6 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Steve Winslow <swinslow@gmail.com>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Jilayne Lovejoy <opensource@jilayne.com>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190519154043.007767574@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When zram test is skipped because of unmet dependencies and/or
unsupported configuration, it exits with error which is treated as
a fail by the Kselftest framework. This leads to false negative result
even when the test could not be run.
Change it to return kselftest skip code when a test gets skipped to
clearly report that the test could not be run.
Kselftest framework SKIP code is 4 and the framework prints appropriate
messages to indicate that the test is skipped.
Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org>
Not all shells define a variable UID. This is a bash and zsh feature only.
In other shells, the UID variable is not defined, so here test command
expands to [ != 0 ] which is a syntax error.
Without this patch:
root@HGH1000007090:/opt/work/linux/tools/testing/selftests/zram# sh zram.sh
zram.sh: 8: [: !=: unexpected operator
zram.sh : No zram.ko module or /dev/zram0 device file not found
zram.sh : CONFIG_ZRAM is not set
With this patch:
root@HGH1000007090:/opt/work/linux/tools/testing/selftests/zram# sh ./zram.sh
zram.sh : No zram.ko module or /dev/zram0 device file not found
zram.sh : CONFIG_ZRAM is not set
Signed-off-by: Zhang Zhen <zhenzhang.zhang@huawei.com>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Adding new functionality check_prereqs() to check test must be run as root
Signed-off-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
zram: Compressed RAM based block devices
----------------------------------------
The zram module creates RAM based block devices named /dev/zram<id>
(<id> = 0, 1, ...). Pages written to these disks are compressed and stored
in memory itself. These disks allow very fast I/O and compression provides
good amounts of memory savings. Some of the usecases include /tmp storage,
use as swap disks, various caches under /var and maybe many more :)
Statistics for individual zram devices are exported through sysfs nodes at
/sys/block/zram<id>/
This patch is to validate the zram functionality. Test interacts with block
device /dev/zram<id> and sysfs nodes /sys/block/zram<id>/
zram.sh: sanity check of CONFIG_ZRAM and to run zram01 and zram02 tests
zram01.sh: creates general purpose ram disks with different filesystems
zram02.sh: creates block device for swap
zram_lib.sh: create library with initialization/cleanup functions
README: ZRAM introduction and Kconfig required.
Makefile: To run zram tests
zram test output
-----------------
./zram.sh
--------------------
running zram tests
--------------------
/dev/zram0 device file found: OK
set max_comp_streams to zram device(s)
/sys/block/zram0/max_comp_streams = '2' (1/1)
zram max streams: OK
test that we can set compression algorithm
supported algs: [lzo] lz4
/sys/block/zram0/comp_algorithm = 'lzo' (1/1)
zram set compression algorithm: OK
set disk size to zram device(s)
/sys/block/zram0/disksize = '2097152' (1/1)
zram set disksizes: OK
set memory limit to zram device(s)
/sys/block/zram0/mem_limit = '2M' (1/1)
zram set memory limit: OK
make ext4 filesystem on /dev/zram0
zram mkfs.ext4: OK
mount /dev/zram0
zram mount of zram device(s): OK
fill zram0...
zram0 can be filled with '1932' KB
zram used 3M, zram disk sizes 2097152M
zram compression ratio: 699050.66:1: OK
zram cleanup
zram01 : [PASS]
/dev/zram0 device file found: OK
set max_comp_streams to zram device(s)
/sys/block/zram0/max_comp_streams = '2' (1/1)
zram max streams: OK
set disk size to zram device(s)
/sys/block/zram0/disksize = '1048576' (1/1)
zram set disksizes: OK
set memory limit to zram device(s)
/sys/block/zram0/mem_limit = '1M' (1/1)
zram set memory limit: OK
make swap with zram device(s)
done with /dev/zram0
zram making zram mkswap and swapon: OK
zram swapoff: OK
zram cleanup
zram02 : [PASS]
CC: Shuah Khan <shuahkh@osg.samsung.com>
CC: Tyler Baker <tyler.baker@linaro.org>
CC: Milosz Wasilewski <milosz.wasilewski@linaro.org>
CC: Alexey Kodanev <alexey.kodanev@oracle.com>
Signed-off-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Signed-off-by: Alexey Kodanev <alexey.kodanev@oracle.com>
Reviewed-By: Tyler Baker <tyler.baker@linaro.org>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
