IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
For type String and Binary we are currently usinig the exact-len
limit value as is without attempting any name resolution.
However, the spec may specify the name of a constant rather than an
actual value, which would result in using the constant name as is
and thus break the policy.
Ensure the limit value is passed to get_limit(), which will always
attempt resolving the name before printing the policy rule.
Signed-off-by: Antonio Quartulli <a@unstable.cc>
Link: https://lore.kernel.org/r/20240510232202.24051-1-a@unstable.cc
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
I often forget the exact naming of ops and have to look at
the spec to find it. Add support for listing the operations:
$ ./cli.py --spec .../netdev.yaml --list-ops
dev-get [ do, dump ]
page-pool-get [ do, dump ]
page-pool-stats-get [ do, dump ]
queue-get [ do, dump ]
napi-get [ do, dump ]
qstats-get [ dump ]
For completeness also support listing all ops (including
notifications:
# ./cli.py --spec .../netdev.yaml --list-msgs
dev-get [ dump, do ]
dev-add-ntf [ notify ]
dev-del-ntf [ notify ]
dev-change-ntf [ notify ]
page-pool-get [ dump, do ]
page-pool-add-ntf [ notify ]
page-pool-del-ntf [ notify ]
page-pool-change-ntf [ notify ]
page-pool-stats-get [ dump, do ]
queue-get [ dump, do ]
napi-get [ dump, do ]
qstats-get [ dump ]
Use double space after the name for slightly easier to read
output.
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://lore.kernel.org/r/20240502164043.2130184-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When using YNL in tests appending the doc string to the type
name makes it harder to check that we got the correct error.
Put the doc under a separate key.
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://lore.kernel.org/r/20240426003111.359285-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
NLMSG_DONE contains an error code, it has to be extracted.
Prior to this change all dumps will end in success,
and in case of failure the result is silently truncated.
Fixes: e4b48ed460 ("tools: ynl: add a completely generic client")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://lore.kernel.org/r/20240420020827.3288615-1-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add a "--multi <do-op> <json>" command line to ynl that makes it
possible to add several operations to a single netlink request payload.
The --multi command line option is repeated for each operation.
This is used by the nftables family for transaction batches. For
example:
./tools/net/ynl/cli.py \
--spec Documentation/netlink/specs/nftables.yaml \
--multi batch-begin '{"res-id": 10}' \
--multi newtable '{"name": "test", "nfgen-family": 1}' \
--multi newchain '{"name": "chain", "table": "test", "nfgen-family": 1}' \
--multi batch-end '{"res-id": 10}'
[None, None, None, None]
It can also be used for bundling get requests:
./tools/net/ynl/cli.py \
--spec Documentation/netlink/specs/nftables.yaml \
--multi gettable '{"name": "test", "nfgen-family": 1}' \
--multi getchain '{"name": "chain", "table": "test", "nfgen-family": 1}' \
--output-json
[{"name": "test", "use": 1, "handle": 1, "flags": [],
"nfgen-family": 1, "version": 0, "res-id": 2},
{"table": "test", "name": "chain", "handle": 1, "use": 0,
"nfgen-family": 1, "version": 0, "res-id": 2}]
Signed-off-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://lore.kernel.org/r/20240418104737.77914-4-donald.hunter@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
NetlinkProtocol.decode() was looking up ops by response value which breaks
when it is used for extack decoding of directional ops. Instead, pass
the op to decode().
Signed-off-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://lore.kernel.org/r/20240418104737.77914-3-donald.hunter@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
YNL currently reports None for empty dump:
$ cli.py ...netdev.yaml --dump page-pool-get
None
This doesn't matter for the CLI but when writing YNL based tests
having to deal with either list or None is annoying. Limit the
None conversion to non-dump ops:
$ cli.py ...netdev.yaml --dump page-pool-get
[]
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://lore.kernel.org/r/20240412141436.828666-3-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add binary and integer sub-type support for indexed-array to display bond
arp and ns targets. Here is what the result looks like:
# ip link add bond0 type bond mode 1 \
arp_ip_target 192.168.1.1,192.168.1.2 ns_ip6_target 2001::1,2001::2
# ./tools/net/ynl/cli.py --spec Documentation/netlink/specs/rt_link.yaml \
--do getlink --json '{"ifname": "bond0"}' --output-json | jq '.linkinfo'
"arp-ip-target": [
"192.168.1.1",
"192.168.1.2"
],
[...]
"ns-ip6-target": [
"2001::1",
"2001::2"
],
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://lore.kernel.org/r/20240404063114.1221532-3-liuhangbin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Typing e.nl_msg.error when processing exception is a bit tedious
and counter-intuitive. Set a local .error member to the positive
value of the netlink level error.
Reviewed-by: Petr Machata <petrm@nvidia.com>
Link: https://lore.kernel.org/r/20240403023426.1762996-3-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
ethtool.py depends on yml files in a specific location of the linux kernel
tree. Using relative lookup for those files means that ethtool.py would
need to be run under tools/net/ynl/. Lookup needed yml files without
depending on the current working directory that ethtool.py is invoked from.
Signed-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
Link: https://lore.kernel.org/r/20240402204000.115081-1-rrameshbabu@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Checking if dump is empty requires a couple of casts.
Add a convenient wrapper.
Add an example use in the netdev sample, loopback is always
present so an empty dump is an error.
Reviewed-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Link: https://lore.kernel.org/r/20240329181651.319326-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Update ynl-gen-rst to generate hyperlinks to definitions, attribute
sets and sub-messages from all the places that reference them.
Note that there is a single label namespace for all of the kernel docs.
Hyperlinks within a single netlink doc need to be qualified by the
family name to avoid collisions.
The label format is 'family-type-name' which gives, for example,
'rt-link-attribute-set-link-attrs' as the link id.
Signed-off-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://lore.kernel.org/r/20240329135021.52534-3-donald.hunter@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The tables of contents in the generated Netlink docs include individual
attribute definitions. This can make the contents exceedingly long and
repeats a lot of what is on the rest of the pages. See for example:
https://docs.kernel.org/networking/netlink_spec/tc.html
Add a depth limit to the contents directive in generated .rst files to
limit the contents depth to 3 levels. This reduces the contents to:
- Family
- Summary
- Operations
- op-one
- op-two
- ...
- Definitions
- struct-one
- struct-two
- enum-one
- ...
- Attribute sets
- attrs-one
- attrs-two
- ...
Signed-off-by: Donald Hunter <donald.hunter@gmail.com>
Reviewed-by: Breno Leitao <leitao@debian.org>
Link: https://lore.kernel.org/r/20240329135021.52534-2-donald.hunter@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The NLMSGERR_ATTR_POLICY extack attribute has been ignored by ynl up to
now. Extend extack decoding to include _POLICY and the nested
NL_POLICY_TYPE_ATTR_* attributes.
For example:
./tools/net/ynl/cli.py \
--spec Documentation/netlink/specs/rt_link.yaml \
--create --do newlink --json '{
"ifname": "12345678901234567890",
"linkinfo": {"kind": "bridge"}
}'
Netlink error: Numerical result out of range
nl_len = 104 (88) nl_flags = 0x300 nl_type = 2
error: -34 extack: {'msg': 'Attribute failed policy validation',
'policy': {'max-length': 15, 'type': 'string'}, 'bad-attr': '.ifname'}
Signed-off-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://lore.kernel.org/r/20240328155636.64688-1-donald.hunter@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Some times it would be convenient to read the integer as hex, like
mask values.
Suggested-by: Donald Hunter <donald.hunter@gmail.com>
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://lore.kernel.org/r/20240327123130.1322921-2-liuhangbin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When we set members of simple nested structures in requests
we need to set "presence" bits for all the nesting layers
below. This has nothing to do with the presence type of
the last layer.
Fixes: be5bea1cc0 ("net: add basic C code generators for Netlink")
Reviewed-by: Breno Leitao <leitao@debian.org>
Link: https://lore.kernel.org/r/20240321020214.1250202-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
I "extracted" YNL C into a GitHub repo to make it easier
to use in other projects: https://github.com/linux-netdev/ynl-c
GitHub actions use Ubuntu by default, and the kernel headers
there are missing f329a0ebea ("genetlink: correct uAPI defines").
Add the direct include workaround for nlctrl.
Fixes: 768e044a5f ("doc/netlink/specs: Add spec for nlctrl netlink family")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://lore.kernel.org/r/20240315002108.523232-1-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The family struct is auto-generated for new families, support
use of the sock_priv_* mechanism added in commit a731132424
("genetlink: introduce per-sock family private storage").
For example if the family wants to use struct sk_buff as its
private struct (unrealistic but just for illustration), it would
add to its spec:
kernel-family:
headers: [ "linux/skbuff.h" ]
sock-priv: struct sk_buff
ynl-gen-c will declare the appropriate priv size and hook
in function prototypes to be implemented by the family.
Link: https://lore.kernel.org/r/20240308190319.2523704-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Support using pre-defined values in checks so we don't need to use hard
code number for the string, binary length. e.g. we have a definition like
#define TEAM_STRING_MAX_LEN 32
Which defined in yaml like:
definitions:
-
name: string-max-len
type: const
value: 32
It can be used in the attribute-sets like
attribute-sets:
-
name: attr-option
name-prefix: team-attr-option-
attributes:
-
name: name
type: string
checks:
len: string-max-len
With this patch it will be converted to
[TEAM_ATTR_OPTION_NAME] = { .type = NLA_STRING, .len = TEAM_STRING_MAX_LEN, }
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://lore.kernel.org/r/20240311140727.109562-1-liuhangbin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Running the page-pool sample on production machines under moderate
networking load shows recycling rate higher than 100%:
$ page-pool
eth0[2] page pools: 14 (zombies: 0)
refs: 89088 bytes: 364904448 (refs: 0 bytes: 0)
recycling: 100.3% (alloc: 1392:2290247724 recycle: 469289484:1828235386)
Note that outstanding refs (89088) == slow alloc * cache size (1392 * 64)
which means this machine is recycling page pool pages perfectly, not
a single page has been released.
The extra 0.3% is because sample ignores allocations from the ptr_ring.
Treat those the same as alloc_fast, the ring vs cache alloc is
already captured accurately enough by recycling stats.
With the fix:
$ page-pool
eth0[2] page pools: 14 (zombies: 0)
refs: 89088 bytes: 364904448 (refs: 0 bytes: 0)
recycling: 100.0% (alloc: 1392:2331141604 recycle: 473625579:1857460661)
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The nlctrl genetlink-legacy family uses nest-type-value encoding as
described in Documentation/userspace-api/netlink/genetlink-legacy.rst
Add nest-type-value decoding to ynl.
Signed-off-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://lore.kernel.org/r/20240306231046.97158-5-donald.hunter@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
ynl-gen-c generates e.g. 'calloc(mcast_groups, sizeof(*dst->mcast_groups))'
for array-nest attrs when it should be 'n_mcast_groups'.
Add a 'n_' prefix in the generated code for array-nests.
Signed-off-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://lore.kernel.org/r/20240306231046.97158-4-donald.hunter@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
ynl does not handle NlError exceptions so they get reported like program
failures. Handle the NlError exceptions and report the netlink errors
more cleanly.
Example now:
Netlink error: No such file or directory
nl_len = 44 (28) nl_flags = 0x300 nl_type = 2
error: -2 extack: {'bad-attr': '.op'}
Example before:
Traceback (most recent call last):
File "/home/donaldh/net-next/./tools/net/ynl/cli.py", line 81, in <module>
main()
File "/home/donaldh/net-next/./tools/net/ynl/cli.py", line 69, in main
reply = ynl.dump(args.dump, attrs)
^^^^^^^^^^^^^^^^^^^^^^^^^^
File "/home/donaldh/net-next/tools/net/ynl/lib/ynl.py", line 906, in dump
return self._op(method, vals, [], dump=True)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
File "/home/donaldh/net-next/tools/net/ynl/lib/ynl.py", line 872, in _op
raise NlError(nl_msg)
lib.ynl.NlError: Netlink error: No such file or directory
nl_len = 44 (28) nl_flags = 0x300 nl_type = 2
error: -2 extack: {'bad-attr': '.op'}
Signed-off-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://lore.kernel.org/r/20240306231046.97158-3-donald.hunter@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Extack decoding was using a hard-coded msg header size of 20 but
netlink-raw has a header size of 16.
Use a protocol specific msghdr_size() when decoding the attr offssets.
Signed-off-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://lore.kernel.org/r/20240306231046.97158-2-donald.hunter@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Donald points out that we don't check for overflows.
Stash the length of the message on nlmsg_pid (nlmsg_seq would
do as well). This allows the attribute helpers to remain
self-contained (no extra arguments). Also let the put
helpers continue to return nothing. The error is checked
only in (newly introduced) ynl_msg_end().
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://lore.kernel.org/r/20240305185000.964773-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Most "production" netlink clients use large buffers to
make dump efficient, which means that handling of dump
continuation in the kernel is not very well tested.
Add an option for debugging / testing handling of dumps.
It enables printing of extra netlink-level debug and
lowers the recv() buffer size in one go. When used
without any argument (--dbg-small-recv) it picks
a very small default (4000), explicit size can be set,
too (--dbg-small-recv 5000).
Example:
$ ./cli.py [...] --dbg-small-recv
Recv: read 3712 bytes, 29 messages
nl_len = 128 (112) nl_flags = 0x0 nl_type = 19
[...]
nl_len = 128 (112) nl_flags = 0x0 nl_type = 19
Recv: read 3968 bytes, 31 messages
nl_len = 128 (112) nl_flags = 0x0 nl_type = 19
[...]
nl_len = 128 (112) nl_flags = 0x0 nl_type = 19
Recv: read 532 bytes, 5 messages
nl_len = 128 (112) nl_flags = 0x0 nl_type = 19
[...]
nl_len = 128 (112) nl_flags = 0x0 nl_type = 19
nl_len = 20 (4) nl_flags = 0x2 nl_type = 3
(the [...] are edits to shorten the commit message).
Note that the first message of the dump is sized conservatively
by the kernel.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
For manual debug, allow printing the netlink level messages
to stderr.
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Make the size of the buffer we use for recv() configurable.
The details of the buffer sizing in netlink are somewhat
arcane, we could spend a lot of time polishing this API.
Let's just leave some hopefully helpful comments for now.
This is a for-developers-only feature, anyway.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We add the new line even if message has no error or extack,
which leads to print(nl_msg) ending with two new lines.
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Build process uses python to generate the user space code.
Remove __pycache__ on make clean.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Donald points out most YNL makefiles are missing distclean
in .PHONY, even tho generated/Makefile does list it.
Suggested-by: Donald Hunter <donald.hunter@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The make target to remove all generated files used to be called
"hardclean" because it deleted files which were tracked by git.
We no longer track generated user space files, so use the more
common "distclean" name.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
To stick to libmnl wrappers in the past we had to use poll()
to check if there are any outstanding notifications on the socket.
This is no longer necessary, we can use MSG_DONTWAIT.
Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Link: https://lore.kernel.org/r/20240227223032.1835527-16-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Most libmnl socket helpers can be replaced by direct calls to
the underlying libc API. We need portid, the netlink manpage
suggests we bind() address of zero.
Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Link: https://lore.kernel.org/r/20240227223032.1835527-14-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
All YNL parsing callbacks take struct ynl_parse_arg as the argument.
Make that official by using a local callback type instead of mnl_cb_t.
Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Link: https://lore.kernel.org/r/20240227223032.1835527-12-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
There's only one set of callbacks in YNL, for netlink control
messages, and most of them are trivial. So implement the message
walking directly without depending on mnl_cb_run2().
Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Link: https://lore.kernel.org/r/20240227223032.1835527-11-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
ynl_recv_ack() is simple and it's the only user of mnl_cb_run().
Now that ynl_sock_read_msgs() exists it's actually less code
to use ynl_sock_read_msgs() instead of being special.
Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Link: https://lore.kernel.org/r/20240227223032.1835527-10-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
All callers to mnl_cb_run2() call mnl_socket_recvfrom() right before.
Wrap the two in a helper, take typed arguments (struct ynl_parse_arg),
instead of hoping that all callers remember that parser error handling
requires yarg.
In case of ynl_sock_read_family() we will no longer check for kernel
returning no data, but that would be a kernel bug, not worth complicating
the code to catch this. Calling mnl_cb_run2() on an empty buffer
is legal and results in STOP (1).
Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Link: https://lore.kernel.org/r/20240227223032.1835527-9-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit f2ba1e5e22 ("tools: ynl-gen: stop generating common notification handlers")
removed the last caller of the parse_cb_run() helper.
We no longer need to export ynl_cb_array.
Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Link: https://lore.kernel.org/r/20240227223032.1835527-8-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
All YNL parsing code expects a pointer to struct ynl_parse_arg AKA yarg.
For dump was pass in struct ynl_dump_state, which works fine, because
struct ynl_dump_state and struct ynl_parse_arg have identical layout
for the members that matter.. but it's a bit hacky.
Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Link: https://lore.kernel.org/r/20240227223032.1835527-7-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Create helpers for accessing payloads of struct nlmsg.
Use them instead of the libmnl ones.
Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Link: https://lore.kernel.org/r/20240227223032.1835527-5-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
