IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Add CAAM driver that works using the DPSECI backend, i.e. manages
DPSECI DPAA2 objects sitting on the Management Complex (MC) fsl-mc bus.
Data transfers (crypto requests) are sent/received to/from CAAM crypto
engine via Queue Interface (v2), this being similar to existing caam/qi.
OTOH, configuration/setup (obtaining virtual queue IDs, authorization
etc.) is done by sending commands to the MC f/w.
Note that the CAAM accelerator included in DPAA2 platforms still has
Job Rings. However, the driver being added does not handle access
via this backend. Kconfig & Makefile are updated such that DPAA2-CAAM
(a.k.a. "caam/qi2") driver does not depend on caam/jr or caam/qi
backends - which rely on platform bus support (ctrl.c).
Support for the following aead and authenc algorithms is also added
in this patch:
-aead:
gcm(aes)
rfc4106(gcm(aes))
rfc4543(gcm(aes))
-authenc:
authenc(hmac({md5,sha*}),cbc({aes,des,des3_ede}))
echainiv(authenc(hmac({md5,sha*}),cbc({aes,des,des3_ede})))
authenc(hmac({md5,sha*}),rfc3686(ctr(aes))
seqiv(authenc(hmac({md5,sha*}),rfc3686(ctr(aes)))
Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This accelerator is found inside hisilicon hip06 and hip07 SoCs.
Each instance provides a number of queues which feed a different number of
backend acceleration units.
The queues are operating in an out of order mode in the interests of
throughput. The silicon does not do tracking of dependencies between
multiple 'messages' or update of the IVs as appropriate for training.
Hence where relevant we need to do this in software.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This ports the Qcom prng from older hw_random driver.
No change of functionality and move from hw_random to crypto
APIs is done.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The blackfin architecture is getting removed, so this
driver won't be used any more.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Introduce basic low level Arm TrustZone CryptoCell HW support.
This first patch doesn't actually register any Crypto API
transformations, these will follow up in the next patch.
This first revision supports the CC 712 REE component.
Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Pull crypto updates from Herbert Xu:
"Here is the crypto update for 4.15:
API:
- Disambiguate EBUSY when queueing crypto request by adding ENOSPC.
This change touches code outside the crypto API.
- Reset settings when empty string is written to rng_current.
Algorithms:
- Add OSCCA SM3 secure hash.
Drivers:
- Remove old mv_cesa driver (replaced by marvell/cesa).
- Enable rfc3686/ecb/cfb/ofb AES in crypto4xx.
- Add ccm/gcm AES in crypto4xx.
- Add support for BCM7278 in iproc-rng200.
- Add hash support on Exynos in s5p-sss.
- Fix fallback-induced error in vmx.
- Fix output IV in atmel-aes.
- Fix empty GCM hash in mediatek.
Others:
- Fix DoS potential in lib/mpi.
- Fix potential out-of-order issues with padata"
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (162 commits)
lib/mpi: call cond_resched() from mpi_powm() loop
crypto: stm32/hash - Fix return issue on update
crypto: dh - Remove pointless checks for NULL 'p' and 'g'
crypto: qat - Clean up error handling in qat_dh_set_secret()
crypto: dh - Don't permit 'key' or 'g' size longer than 'p'
crypto: dh - Don't permit 'p' to be 0
crypto: dh - Fix double free of ctx->p
hwrng: iproc-rng200 - Add support for BCM7278
dt-bindings: rng: Document BCM7278 RNG200 compatible
crypto: chcr - Replace _manual_ swap with swap macro
crypto: marvell - Add a NULL entry at the end of mv_cesa_plat_id_table[]
hwrng: virtio - Virtio RNG devices need to be re-registered after suspend/resume
crypto: atmel - remove empty functions
crypto: ecdh - remove empty exit()
MAINTAINERS: update maintainer for qat
crypto: caam - remove unused param of ctx_map_to_sec4_sg()
crypto: caam - remove unneeded edesc zeroization
crypto: atmel-aes - Reset the controller before each use
crypto: atmel-aes - properly set IV after {en,de}crypt
hwrng: core - Reset user selected rng by writing "" to rng_current
...
All defconfigs selecting the old driver have been patched to select
the new one instead. We can now remove the old driver along with the
allhwsupports module parameter in the new driver that was used to
check whether the new driver was allowed to take control of the CESA
engine or not.
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This is an asynchronous crypto API driver for the accelerator present
in the ARTPEC-6 and -7 SoCs from Axis Communications AB.
The driver supports AES in ECB/CTR/CBC/XTS/GCM modes and SHA1/2 hash
standards.
Signed-off-by: Lars Persson <larper@axis.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The complete stm32 module is rename as crypto
in order to use generic naming
Signed-off-by: Lionel Debieve <lionel.debieve@st.com>
Reviewed-by: Fabien Dessenne <fabien.dessenne@st.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add ECDH support for ATECC508A (I2C) device.
The device features hardware acceleration for the NIST standard
P256 prime curve and supports the complete key life cycle from
private key generation to ECDH key agreement.
Random private key generation is supported internally within
the device to ensure that the private key can never be known
outside of the device. If the user wants to use its own private
keys, the driver will fallback to the ecdh software implementation.
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add Physical Function driver support for CNN55XX crypto adapters.
CNN55XX adapters belongs to Cavium NITROX family series,
which accelerate both Symmetric and Asymmetric crypto workloads.
These adapters have crypto engines that need firmware
to become operational.
Signed-off-by: Srikanth Jampala <Jampala.Srikanth@cavium.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add support for Inside Secure SafeXcel EIP197 cryptographic engine,
which can be found on Marvell Armada 7k and 8k boards. This driver
currently implements: ecb(aes), cbc(aes), sha1, sha224, sha256 and
hmac(sah1) algorithms.
Two firmwares are needed for this engine to work. Their are mostly used
for more advanced operations than the ones supported (as of now), but we
still need them to pass the data to the internal cryptographic engine.
Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
OMAP AES hw supports AES-GCM mode. This patch adds support for GCM and
RFC4106 GCM mode in omap-aes driver. The GCM implementation is mostly
written into its own source file, which gets built into the same driver
binary as the existing AES support.
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
[t-kristo@ti.com: forward port to latest upstream kernel, conversion to use
omap-crypto lib and some additional fixes]
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This contains the generic APIs for aligning SG buffers.
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Replace existing hw_ranndom/exynos-rng driver with a new, reworked one.
This is a driver for pseudo random number generator block which on
Exynos4 chipsets must be seeded with some value. On newer Exynos5420
chipsets it might seed itself from true random number generator block
but this is not implemented yet.
New driver is a complete rework to use the crypto ALGAPI instead of
hw_random API. Rationale for the change:
1. hw_random interface is for true RNG devices.
2. The old driver was seeding itself with jiffies which is not a
reliable source for randomness.
3. Device generates five random 32-bit numbers in each pass but old
driver was returning only one 32-bit number thus its performance was
reduced.
Compatibility with DeviceTree bindings is preserved.
New driver does not use runtime power management but manually enables
and disables the clock when needed. This is preferred approach because
using runtime PM just to toggle clock is huge overhead.
Another difference is reseeding itself with generated random data
periodically and during resuming from system suspend (previously driver
was re-seeding itself again with jiffies).
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Stephan Müller <smueller@chronox.de>
Reviewed-by: PrasannaKumar Muralidharan <prasannatsmkumar@gmail.com>
Reviewed-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This module registers a CRC32 ("Ethernet") and a CRC32C (Castagnoli)
algorithm that make use of the STMicroelectronics STM32 crypto hardware.
Theses algorithms are compatible with the little-endian generic ones.
Both algorithms use ~0 as default seed (key).
With CRC32C the output is xored with ~0.
Using TCRYPT CRC32C speed test, this shows up to 900% speedup compared
to the crc32c-generic algorithm.
Signed-off-by: Fabien Dessenne <fabien.dessenne@st.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add a driver for the ZIP engine found on Cavium ThunderX SOCs.
The ZIP engine supports hardware accelerated compression and
decompression. It includes 2 independent ZIP cores and supports:
- DEFLATE compression and decompression (RFC 1951)
- LZS compression and decompression (RFC 2395 and ANSI X3.241-1994)
- ADLER32 and CRC32 checksums for ZLIB (RFC 1950) and GZIP (RFC 1952)
The ZIP engine is presented as a PCI device. It supports DMA and
scatter-gather.
Signed-off-by: Mahipal Challa <Mahipal.Challa@cavium.com>
Signed-off-by: Jan Glauber <jglauber@cavium.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add Broadcom Secure Processing Unit (SPU) crypto driver for SPU
hardware crypto offload. The driver supports ablkcipher, ahash,
and aead symmetric crypto operations.
Signed-off-by: Steve Lin <steven.lin1@broadcom.com>
Signed-off-by: Rob Rice <rob.rice@broadcom.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add the CPT options in crypto Kconfig and update the
crypto Makefile
Update the MAINTAINERS file too.
Signed-off-by: George Cherian <george.cherian@cavium.com>
Reviewed-by: David Daney <david.daney@cavium.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This adds support for the MediaTek hardware accelerator on
mt7623/mt2701/mt8521p SoC.
This driver currently implement:
- SHA1 and SHA2 family(HMAC) hash algorithms.
- AES block cipher in CBC/ECB mode with 128/196/256 bits keys.
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
THe major content of drivers/crypto/Makefile is sorted, only recent
addition break this sort.
This patch bring back this alphabetical sorting.
Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch introduces virtio-crypto driver for Linux Kernel.
The virtio crypto device is a virtual cryptography device
as well as a kind of virtual hardware accelerator for
virtual machines. The encryption anddecryption requests
are placed in the data queue and are ultimately handled by
thebackend crypto accelerators. The second queue is the
control queue used to create or destroy sessions for
symmetric algorithms and will control some advanced features
in the future. The virtio crypto device provides the following
cryptoservices: CIPHER, MAC, HASH, and AEAD.
For more information about virtio-crypto device, please see:
http://qemu-project.org/Features/VirtioCrypto
CC: Michael S. Tsirkin <mst@redhat.com>
CC: Cornelia Huck <cornelia.huck@de.ibm.com>
CC: Stefan Hajnoczi <stefanha@redhat.com>
CC: Herbert Xu <herbert@gondor.apana.org.au>
CC: Halil Pasic <pasic@linux.vnet.ibm.com>
CC: David S. Miller <davem@davemloft.net>
CC: Zeng Xin <xin.zeng@intel.com>
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Adds the config entry for the Chelsio Crypto Driver, Makefile changes
for the same.
Signed-off-by: Atul Gupta <atul.gupta@chelsio.com>
Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
According to the Freescale GPL driver code, there are two different
Security Controller (SCC) versions: SCC and SCC2.
The SCC is found on older i.MX SoCs, e.g. the i.MX25. This is the
version implemented and tested here.
As there is no publicly available documentation for this IP core,
all information about this unit is gathered from the GPL'ed driver
from Freescale.
Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Crypto driver support:
ecb(aes) cbc(aes) ecb(des) cbc(des) ecb(des3_ede) cbc(des3_ede)
You can alloc tags above in your case.
And other algorithms and platforms will be added later on.
Signed-off-by: Zain Wang <zain.wang@rock-chips.com>
Tested-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add support for the Security System included in Allwinner SoC A20.
The Security System is a hardware cryptographic accelerator that support:
- MD5 and SHA1 hash algorithms
- AES block cipher in CBC/ECB mode with 128/196/256bits keys.
- DES and 3DES block cipher in CBC/ECB mode
Signed-off-by: LABBE Corentin <clabbe.montjoie@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The existing mv_cesa driver supports some features of the CESA IP but is
quite limited, and reworking it to support new features (like involving the
TDMA engine to offload the CPU) is almost impossible.
This driver has been rewritten from scratch to take those new features into
account.
This commit introduce the base infrastructure allowing us to add support
for DMA optimization.
It also includes support for one hash (SHA1) and one cipher (AES)
algorithm, and enable those features on the Armada 370 SoC.
Other algorithms and platforms will be added later on.
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Arnaud Ebalard <arno@natisbad.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This adds support for the Imagination Technologies hash accelerator which
provides hardware acceleration for SHA1 SHA224 SHA256 and MD5 hashes.
Signed-off-by: James Hartley <james.hartley@imgtec.com>
Reviewed-by: Andrew Bresticker <abrestic@chromium.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch enables VMX module in PPC64.
Signed-off-by: Leonidas S. Barbosa <leosilva@linux.vnet.ibm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Modify crypto Kconfig and Makefile in order to build the qce
driver and adds qce Makefile as well.
Signed-off-by: Stanimir Varbanov <svarbanov@mm-sol.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Update to makefiles etc.
Don't update the firmware/Makefile yet since there is no FW binary in
the crypto repo yet. This will be added later.
v3 - removed change to ./firmware/Makefile
Reviewed-by: Bruce W. Allan <bruce.w.allan@intel.com>
Signed-off-by: Tadeusz Struk <tadeusz.struk@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This driver has never been hooked up in any board file, and cannot be
instantiated via device tree. I've been told that, at least on Tegra20,
the HW is slower at crypto than the main CPU. I have no test-case for
it. Hence, remove it.
Cc: Varun Wadekar <vwadekar@nvidia.com>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add config and build options for the omap-des driver.
Signed-off-by: Joel Fernandes <joelf@ti.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The order in the Makefile was a mess, sort it.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: David S. Miller <davem@davemloft.net>
Cc: Fabio Estevam <fabio.estevam@freescale.com>
Cc: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add support for the MXS DCP block. The driver currently supports
SHA-1/SHA-256 hashing and AES-128 CBC/ECB modes. The non-standard
CRC32 is not yet supported.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: David S. Miller <davem@davemloft.net>
Cc: Fabio Estevam <fabio.estevam@freescale.com>
Cc: Shawn Guo <shawn.guo@linaro.org>
Cc: devicetree@vger.kernel.org
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Remove the old DCP driver as it had multiple severe issues. The driver
will be replaced by a more robust implementation. Here is a short list
of problems with this driver:
1) It only supports AES_CBC
2) The driver was apparently never ran behind anyone working with MXS. ie.:
-> Restarting the DCP block is not done via mxs_reset_block()
-> The DT name is not "fsl,dcp" or "fsl,mxs-dcp" as other MXS drivers
3) Introduces new ad-hoc IOCTLs
4) The IRQ handler can't use usual completion() in the driver because that'd
trigger "scheduling while atomic" oops, yes?
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: David S. Miller <davem@davemloft.net>
Cc: Fabio Estevam <fabio.estevam@freescale.com>
Cc: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
These files provide the ability to configure and build the
AMD CCP device driver and crypto API support.
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch enables the DCP crypto functionality on imx28.
Currently, only aes-128-cbc is supported.
Moreover, the dcpboot misc-device, which is used by Freescale's
SDK tools and uses a non-software-readable OTP-key, is added.
Changes of v2:
- ring buffer for hardware-descriptors
- use of ablkcipher walk
- OTP key encryption/decryption via misc-device
(compatible to Freescale-SDK)
- overall cleanup
The DCP is also capable of sha1/sha256 but I won't be able to add
that anytime soon.
Tested with built-in runtime-self-test, tcrypt and openssl via
cryptodev 1.6 on imx28-evk and a custom built imx28-board.
Signed-off-by: Tobias Rauter <tobias.rauter@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
SAHARA2 HW module is included in the i.MX27 SoC from
Freescale. It is capable of performing cipher algorithms
such as AES, 3DES..., hashing and RNG too.
This driver provides support for AES-CBC and AES-ECB
by now.
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Javier Martin <javier.martin@vista-silicon.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Nicolas Royer <nicolas@eukrea.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: Eric Bénard <eric@eukrea.com>
Tested-by: Eric Bénard <eric@eukrea.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Nicolas Royer <nicolas@eukrea.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: Eric Bénard <eric@eukrea.com>
Tested-by: Eric Bénard <eric@eukrea.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Nicolas Royer <nicolas@eukrea.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: Eric Bénard <eric@eukrea.com>
Tested-by: Eric Bénard <eric@eukrea.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
When the nx driver was pulled, the Makefile that actually
builds it is arch/powerpc/Makefile. This is unnatural.
This patch moves the line that builds the nx driver from
arch/powerpc/Makefile to drivers/crypto/Makefile where it
belongs.
Signed-off-by: Seth Jennings <sjenning@linux.vnet.ibm.com>
Acked-by: Kent Yoder <key@linux.vnet.ibm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The CRC peripheral is a hardware block used to compute the CRC of the block
of data. This is based on a CRC32 engine which computes the CRC value of 32b
data words presented to it. For data words of < 32b in size, this driver
pack 0 automatically into 32b data units. This driver implements the async
hash crypto framework API.
Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This adds a driver for the ST-Ericsson ux500 crypto hardware
module. It supports AES, DES and 3DES, the driver implements
support for AES-ECB,CBC and CTR.
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Andreas Westin <andreas.westin@stericsson.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This change adds support for AES encrypting and decrypting using
advanced crypto engine found on Samsung S5PV210 and S5PC110 SoCs.
Signed-off-by: Vladimir Zapolskiy <vzapolskiy@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The SEC4 supercedes the SEC2.x/3.x as Freescale's
Integrated Security Engine. Its programming model is
incompatible with all prior versions of the SEC (talitos).
The SEC4 is also known as the Cryptographic Accelerator
and Assurance Module (CAAM); this driver is named caam.
This initial submission does not include support for Data Path
mode operation - AEAD descriptors are submitted via the job
ring interface, while the Queue Interface (QI) is enabled
for use by others. Only AEAD algorithms are implemented
at this time, for use with IPsec.
Many thanks to the Freescale STC team for their contributions
to this driver.
Signed-off-by: Steve Cornelius <sec@pobox.com>
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Picochip picoXcell devices have two crypto engines, one targeted
at IPSEC offload and the other at WCDMA layer 2 ciphering.
Signed-off-by: Jamie Iles <jamie@jamieiles.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
