IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
The call to synchronize_srcu() from rcu_tasks_postscan() can be stalled
by a task getting stuck in do_exit() between that function's calls to
exit_tasks_rcu_start() and exit_tasks_rcu_finish(). To ease diagnosis
of this situation, print a stall warning message every rcu_task_stall_info
period when rcu_tasks_postscan() is stalled.
[ paulmck: Adjust to handle CONFIG_SMP=n. ]
Acked-by: Frederic Weisbecker <frederic@kernel.org>
Reviewed-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Reported-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/rcu/20230111212736.GA1062057@paulmck-ThinkPad-P17-Gen-1/
Signed-off-by: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
The tasks_rcu_exit_srcu variable is used only by kernels built
with CONFIG_TASKS_RCU=y, but is defined for all kernesl with
CONFIG_TASKS_RCU_GENERIC=y. Therefore, in kernels built with
CONFIG_TASKS_RCU_GENERIC=y but CONFIG_TASKS_RCU=n, this gives
a "defined but not used" warning.
This commit therefore moves this variable under CONFIG_TASKS_RCU.
Link: https://lore.kernel.org/oe-kbuild-all/202303191536.XzMSyzTl-lkp@intel.com/
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Tested-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The rcu_tasks_need_gpcb() determines whether or not: (1) There are
callbacks needing another grace period, (2) There are callbacks ready
to be invoked, and (3) It would be a good time to shrink back down to a
single-CPU callback list. This third case is interesting because some
other CPU might be adding new callbacks, which might suddenly make this
a very bad time to be shrinking.
This is currently handled by requiring call_rcu_tasks_generic() to
enqueue callbacks under the protection of rcu_read_lock() and requiring
rcu_tasks_need_gpcb() to wait for an RCU grace period to elapse before
finalizing the transition. This works well in practice.
Unfortunately, the current code assumes that a grace period whose end is
detected by the poll_state_synchronize_rcu() in the second "if" condition
actually ended before the earlier code counted the callbacks queued on
CPUs other than CPU 0 (local variable "ncbsnz"). Given the current code,
it is possible that a long-delayed call_rcu_tasks_generic() invocation
will queue a callback on a non-zero CPU after these CPUs have had their
callbacks counted and zero has been stored to ncbsnz. Such a callback
would trigger the WARN_ON_ONCE() in the second "if" statement.
To see this, consider the following sequence of events:
o CPU 0 invokes rcu_tasks_one_gp(), and counts fewer than
rcu_task_collapse_lim callbacks. It sees at least one
callback queued on some other CPU, thus setting ncbsnz
to a non-zero value.
o CPU 1 invokes call_rcu_tasks_generic() and loads 42 from
->percpu_enqueue_lim. It therefore decides to enqueue its
callback onto CPU 1's callback list, but is delayed.
o CPU 0 sees the rcu_task_cb_adjust is non-zero and that the number
of callbacks does not exceed rcu_task_collapse_lim. It therefore
checks percpu_enqueue_lim, and sees that its value is greater
than the value one. CPU 0 therefore starts the shift back
to a single callback list. It sets ->percpu_enqueue_lim to 1,
but CPU 1 has already read the old value of 42. It also gets
a grace-period state value from get_state_synchronize_rcu().
o CPU 0 sees that ncbsnz is non-zero in its second "if" statement,
so it declines to finalize the shrink operation.
o CPU 0 again invokes rcu_tasks_one_gp(), and counts fewer than
rcu_task_collapse_lim callbacks. It also sees that there are
no callback queued on any other CPU, and thus sets ncbsnz to zero.
o CPU 1 resumes execution and enqueues its callback onto its own
list. This invalidates the value of ncbsnz.
o CPU 0 sees the rcu_task_cb_adjust is non-zero and that the number
of callbacks does not exceed rcu_task_collapse_lim. It therefore
checks percpu_enqueue_lim, but sees that its value is already
unity. It therefore does not get a new grace-period state value.
o CPU 0 sees that rcu_task_cb_adjust is non-zero, ncbsnz is zero,
and that poll_state_synchronize_rcu() says that the grace period
has completed. it therefore finalizes the shrink operation,
setting ->percpu_dequeue_lim to the value one.
o CPU 0 does a debug check, scanning the other CPUs' callback lists.
It sees that CPU 1's list has a callback, so it (rightly)
triggers the WARN_ON_ONCE(). After all, the new value of
->percpu_dequeue_lim says to not bother looking at CPU 1's
callback list, which means that this callback will never be
invoked. This can result in hangs and maybe even OOMs.
Based on long experience with rcutorture, this is an extremely
low-probability race condition, but it really can happen, especially in
preemptible kernels or within guest OSes.
This commit therefore checks for completion of the grace period
before counting callbacks. With this change, in the above failure
scenario CPU 0 would know not to prematurely end the shrink operation
because the grace period would not have completed before the count
operation started.
[ paulmck: Adjust grace-period end rather than adding RCU reader. ]
[ paulmck: Avoid spurious WARN_ON_ONCE() with ->percpu_dequeue_lim check. ]
Signed-off-by: Zqiang <qiang1.zhang@intel.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The synchronize_rcu_tasks_rude() function invokes rcu_tasks_rude_wait_gp()
to wait one rude RCU-tasks grace period. The rcu_tasks_rude_wait_gp()
function in turn checks if there is only a single online CPU. If so, it
will immediately return, because a call to synchronize_rcu_tasks_rude()
is by definition a grace period on a single-CPU system. (We could
have blocked!)
Unfortunately, this check uses num_online_cpus() without synchronization,
which can result in too-short grace periods. To see this, consider the
following scenario:
CPU0 CPU1 (going offline)
migration/1 task:
cpu_stopper_thread
-> take_cpu_down
-> _cpu_disable
(dec __num_online_cpus)
->cpuhp_invoke_callback
preempt_disable
access old_data0
task1
del old_data0 .....
synchronize_rcu_tasks_rude()
task1 schedule out
....
task2 schedule in
rcu_tasks_rude_wait_gp()
->__num_online_cpus == 1
->return
....
task1 schedule in
->free old_data0
preempt_enable
When CPU1 decrements __num_online_cpus, its value becomes 1. However,
CPU1 has not finished going offline, and will take one last trip through
the scheduler and the idle loop before it actually stops executing
instructions. Because synchronize_rcu_tasks_rude() is mostly used for
tracing, and because both the scheduler and the idle loop can be traced,
this means that CPU0's prematurely ended grace period might disrupt the
tracing on CPU1. Given that this disruption might include CPU1 executing
instructions in memory that was just now freed (and maybe reallocated),
this is a matter of some concern.
This commit therefore removes that problematic single-CPU check from the
rcu_tasks_rude_wait_gp() function. This dispenses with the single-CPU
optimization, but there is no evidence indicating that this optimization
is important. In addition, synchronize_rcu_tasks_generic() contains a
similar optimization (albeit only for early boot), which also splats.
(As in exactly why are you invoking synchronize_rcu_tasks_rude() so
early in boot, anyway???)
It is OK for the synchronize_rcu_tasks_rude() function's check to be
unsynchronized because the only times that this check can evaluate to
true is when there is only a single CPU running with preemption
disabled.
While in the area, this commit also fixes a minor bug in which a
call to synchronize_rcu_tasks_rude() would instead be attributed to
synchronize_rcu_tasks().
[ paulmck: Add "synchronize_" prefix and "()" suffix. ]
Signed-off-by: Zqiang <qiang1.zhang@intel.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
RCU Tasks and PID-namespace unshare can interact in do_exit() in a
complicated circular dependency:
1) TASK A calls unshare(CLONE_NEWPID), this creates a new PID namespace
that every subsequent child of TASK A will belong to. But TASK A
doesn't itself belong to that new PID namespace.
2) TASK A forks() and creates TASK B. TASK A stays attached to its PID
namespace (let's say PID_NS1) and TASK B is the first task belonging
to the new PID namespace created by unshare() (let's call it PID_NS2).
3) Since TASK B is the first task attached to PID_NS2, it becomes the
PID_NS2 child reaper.
4) TASK A forks() again and creates TASK C which get attached to PID_NS2.
Note how TASK C has TASK A as a parent (belonging to PID_NS1) but has
TASK B (belonging to PID_NS2) as a pid_namespace child_reaper.
5) TASK B exits and since it is the child reaper for PID_NS2, it has to
kill all other tasks attached to PID_NS2, and wait for all of them to
die before getting reaped itself (zap_pid_ns_process()).
6) TASK A calls synchronize_rcu_tasks() which leads to
synchronize_srcu(&tasks_rcu_exit_srcu).
7) TASK B is waiting for TASK C to get reaped. But TASK B is under a
tasks_rcu_exit_srcu SRCU critical section (exit_notify() is between
exit_tasks_rcu_start() and exit_tasks_rcu_finish()), blocking TASK A.
8) TASK C exits and since TASK A is its parent, it waits for it to reap
TASK C, but it can't because TASK A waits for TASK B that waits for
TASK C.
Pid_namespace semantics can hardly be changed at this point. But the
coverage of tasks_rcu_exit_srcu can be reduced instead.
The current task is assumed not to be concurrently reapable at this
stage of exit_notify() and therefore tasks_rcu_exit_srcu can be
temporarily relaxed without breaking its constraints, providing a way
out of the deadlock scenario.
[ paulmck: Fix build failure by adding additional declaration. ]
Fixes: 3f95aa81d2 ("rcu: Make TASKS_RCU handle tasks that are almost done exiting")
Reported-by: Pengfei Xu <pengfei.xu@intel.com>
Suggested-by: Boqun Feng <boqun.feng@gmail.com>
Suggested-by: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Suggested-by: Paul E. McKenney <paulmck@kernel.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Lai Jiangshan <jiangshanlai@gmail.com>
Cc: Eric W . Biederman <ebiederm@xmission.com>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Ever since the following commit:
5a41344a3d ("srcu: Simplify __srcu_read_unlock() via this_cpu_dec()")
SRCU doesn't rely anymore on preemption to be disabled in order to
modify the per-CPU counter. And even then it used to be done from the API
itself.
Therefore and after checking further, it appears to be safe to remove
the preemption disablement around __srcu_read_[un]lock() in
exit_tasks_rcu_start() and exit_tasks_rcu_finish()
Suggested-by: Boqun Feng <boqun.feng@gmail.com>
Suggested-by: Paul E. McKenney <paulmck@kernel.org>
Suggested-by: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Cc: Lai Jiangshan <jiangshanlai@gmail.com>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Make sure we don't need to look again into the depths of git blame in
order not to miss a subtle part about how rcu-tasks is dealing with
exiting tasks.
Suggested-by: Boqun Feng <boqun.feng@gmail.com>
Suggested-by: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Suggested-by: Paul E. McKenney <paulmck@kernel.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Lai Jiangshan <jiangshanlai@gmail.com>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Currently, test_rcu_tasks_callback() reads from the jiffies counter only
once when this function is invoked. This introduces inaccuracies because
of the latencies induced by the synchronize_rcu_tasks*() invocations.
This commit therefore re-reads the jiffies counter at the beginning
of each test, thus avoiding penalizing later tests for the latencies
induced by earlier tests.
Therefore, this commit at the start of each RCU Tasks test, re-fetch the
jiffies time as the runstart time.
Signed-off-by: Zqiang <qiang1.zhang@intel.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Core
----
- Allow live renaming when an interface is up
- Add retpoline wrappers for tc, improving considerably the
performances of complex queue discipline configurations.
- Add inet drop monitor support.
- A few GRO performance improvements.
- Add infrastructure for atomic dev stats, addressing long standing
data races.
- De-duplicate common code between OVS and conntrack offloading
infrastructure.
- A bunch of UBSAN_BOUNDS/FORTIFY_SOURCE improvements.
- Netfilter: introduce packet parser for tunneled packets
- Replace IPVS timer-based estimators with kthreads to scale up
the workload with the number of available CPUs.
- Add the helper support for connection-tracking OVS offload.
BPF
---
- Support for user defined BPF objects: the use case is to allocate
own objects, build own object hierarchies and use the building
blocks to build own data structures flexibly, for example, linked
lists in BPF.
- Make cgroup local storage available to non-cgroup attached BPF
programs.
- Avoid unnecessary deadlock detection and failures wrt BPF task
storage helpers.
- A relevant bunch of BPF verifier fixes and improvements.
- Veristat tool improvements to support custom filtering, sorting,
and replay of results.
- Add LLVM disassembler as default library for dumping JITed code.
- Lots of new BPF documentation for various BPF maps.
- Add bpf_rcu_read_{,un}lock() support for sleepable programs.
- Add RCU grace period chaining to BPF to wait for the completion
of access from both sleepable and non-sleepable BPF programs.
- Add support storing struct task_struct objects as kptrs in maps.
- Improve helper UAPI by explicitly defining BPF_FUNC_xxx integer
values.
- Add libbpf *_opts API-variants for bpf_*_get_fd_by_id() functions.
Protocols
---------
- TCP: implement Protective Load Balancing across switch links.
- TCP: allow dynamically disabling TCP-MD5 static key, reverting
back to fast[er]-path.
- UDP: Introduce optional per-netns hash lookup table.
- IPv6: simplify and cleanup sockets disposal.
- Netlink: support different type policies for each generic
netlink operation.
- MPTCP: add MSG_FASTOPEN and FastOpen listener side support.
- MPTCP: add netlink notification support for listener sockets
events.
- SCTP: add VRF support, allowing sctp sockets binding to VRF
devices.
- Add bridging MAC Authentication Bypass (MAB) support.
- Extensions for Ethernet VPN bridging implementation to better
support multicast scenarios.
- More work for Wi-Fi 7 support, comprising conversion of all
the existing drivers to internal TX queue usage.
- IPSec: introduce a new offload type (packet offload) allowing
complete header processing and crypto offloading.
- IPSec: extended ack support for more descriptive XFRM error
reporting.
- RXRPC: increase SACK table size and move processing into a
per-local endpoint kernel thread, reducing considerably the
required locking.
- IEEE 802154: synchronous send frame and extended filtering
support, initial support for scanning available 15.4 networks.
- Tun: bump the link speed from 10Mbps to 10Gbps.
- Tun/VirtioNet: implement UDP segmentation offload support.
Driver API
----------
- PHY/SFP: improve power level switching between standard
level 1 and the higher power levels.
- New API for netdev <-> devlink_port linkage.
- PTP: convert existing drivers to new frequency adjustment
implementation.
- DSA: add support for rx offloading.
- Autoload DSA tagging driver when dynamically changing protocol.
- Add new PCP and APPTRUST attributes to Data Center Bridging.
- Add configuration support for 800Gbps link speed.
- Add devlink port function attribute to enable/disable RoCE and
migratable.
- Extend devlink-rate to support strict prioriry and weighted fair
queuing.
- Add devlink support to directly reading from region memory.
- New device tree helper to fetch MAC address from nvmem.
- New big TCP helper to simplify temporary header stripping.
New hardware / drivers
----------------------
- Ethernet:
- Marvel Octeon CNF95N and CN10KB Ethernet Switches.
- Marvel Prestera AC5X Ethernet Switch.
- WangXun 10 Gigabit NIC.
- Motorcomm yt8521 Gigabit Ethernet.
- Microchip ksz9563 Gigabit Ethernet Switch.
- Microsoft Azure Network Adapter.
- Linux Automation 10Base-T1L adapter.
- PHY:
- Aquantia AQR112 and AQR412.
- Motorcomm YT8531S.
- PTP:
- Orolia ART-CARD.
- WiFi:
- MediaTek Wi-Fi 7 (802.11be) devices.
- RealTek rtw8821cu, rtw8822bu, rtw8822cu and rtw8723du USB
devices.
- Bluetooth:
- Broadcom BCM4377/4378/4387 Bluetooth chipsets.
- Realtek RTL8852BE and RTL8723DS.
- Cypress.CYW4373A0 WiFi + Bluetooth combo device.
Drivers
-------
- CAN:
- gs_usb: bus error reporting support.
- kvaser_usb: listen only and bus error reporting support.
- Ethernet NICs:
- Intel (100G):
- extend action skbedit to RX queue mapping.
- implement devlink-rate support.
- support direct read from memory.
- nVidia/Mellanox (mlx5):
- SW steering improvements, increasing rules update rate.
- Support for enhanced events compression.
- extend H/W offload packet manipulation capabilities.
- implement IPSec packet offload mode.
- nVidia/Mellanox (mlx4):
- better big TCP support.
- Netronome Ethernet NICs (nfp):
- IPsec offload support.
- add support for multicast filter.
- Broadcom:
- RSS and PTP support improvements.
- AMD/SolarFlare:
- netlink extened ack improvements.
- add basic flower matches to offload, and related stats.
- Virtual NICs:
- ibmvnic: introduce affinity hint support.
- small / embedded:
- FreeScale fec: add initial XDP support.
- Marvel mv643xx_eth: support MII/GMII/RGMII modes for Kirkwood.
- TI am65-cpsw: add suspend/resume support.
- Mediatek MT7986: add RX wireless wthernet dispatch support.
- Realtek 8169: enable GRO software interrupt coalescing per
default.
- Ethernet high-speed switches:
- Microchip (sparx5):
- add support for Sparx5 TC/flower H/W offload via VCAP.
- Mellanox mlxsw:
- add 802.1X and MAC Authentication Bypass offload support.
- add ip6gre support.
- Embedded Ethernet switches:
- Mediatek (mtk_eth_soc):
- improve PCS implementation, add DSA untag support.
- enable flow offload support.
- Renesas:
- add rswitch R-Car Gen4 gPTP support.
- Microchip (lan966x):
- add full XDP support.
- add TC H/W offload via VCAP.
- enable PTP on bridge interfaces.
- Microchip (ksz8):
- add MTU support for KSZ8 series.
- Qualcomm 802.11ax WiFi (ath11k):
- support configuring channel dwell time during scan.
- MediaTek WiFi (mt76):
- enable Wireless Ethernet Dispatch (WED) offload support.
- add ack signal support.
- enable coredump support.
- remain_on_channel support.
- Intel WiFi (iwlwifi):
- enable Wi-Fi 7 Extremely High Throughput (EHT) PHY capabilities.
- 320 MHz channels support.
- RealTek WiFi (rtw89):
- new dynamic header firmware format support.
- wake-over-WLAN support.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----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=CbJC
-----END PGP SIGNATURE-----
Merge tag 'net-next-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Paolo Abeni:
"Core:
- Allow live renaming when an interface is up
- Add retpoline wrappers for tc, improving considerably the
performances of complex queue discipline configurations
- Add inet drop monitor support
- A few GRO performance improvements
- Add infrastructure for atomic dev stats, addressing long standing
data races
- De-duplicate common code between OVS and conntrack offloading
infrastructure
- A bunch of UBSAN_BOUNDS/FORTIFY_SOURCE improvements
- Netfilter: introduce packet parser for tunneled packets
- Replace IPVS timer-based estimators with kthreads to scale up the
workload with the number of available CPUs
- Add the helper support for connection-tracking OVS offload
BPF:
- Support for user defined BPF objects: the use case is to allocate
own objects, build own object hierarchies and use the building
blocks to build own data structures flexibly, for example, linked
lists in BPF
- Make cgroup local storage available to non-cgroup attached BPF
programs
- Avoid unnecessary deadlock detection and failures wrt BPF task
storage helpers
- A relevant bunch of BPF verifier fixes and improvements
- Veristat tool improvements to support custom filtering, sorting,
and replay of results
- Add LLVM disassembler as default library for dumping JITed code
- Lots of new BPF documentation for various BPF maps
- Add bpf_rcu_read_{,un}lock() support for sleepable programs
- Add RCU grace period chaining to BPF to wait for the completion of
access from both sleepable and non-sleepable BPF programs
- Add support storing struct task_struct objects as kptrs in maps
- Improve helper UAPI by explicitly defining BPF_FUNC_xxx integer
values
- Add libbpf *_opts API-variants for bpf_*_get_fd_by_id() functions
Protocols:
- TCP: implement Protective Load Balancing across switch links
- TCP: allow dynamically disabling TCP-MD5 static key, reverting back
to fast[er]-path
- UDP: Introduce optional per-netns hash lookup table
- IPv6: simplify and cleanup sockets disposal
- Netlink: support different type policies for each generic netlink
operation
- MPTCP: add MSG_FASTOPEN and FastOpen listener side support
- MPTCP: add netlink notification support for listener sockets events
- SCTP: add VRF support, allowing sctp sockets binding to VRF devices
- Add bridging MAC Authentication Bypass (MAB) support
- Extensions for Ethernet VPN bridging implementation to better
support multicast scenarios
- More work for Wi-Fi 7 support, comprising conversion of all the
existing drivers to internal TX queue usage
- IPSec: introduce a new offload type (packet offload) allowing
complete header processing and crypto offloading
- IPSec: extended ack support for more descriptive XFRM error
reporting
- RXRPC: increase SACK table size and move processing into a
per-local endpoint kernel thread, reducing considerably the
required locking
- IEEE 802154: synchronous send frame and extended filtering support,
initial support for scanning available 15.4 networks
- Tun: bump the link speed from 10Mbps to 10Gbps
- Tun/VirtioNet: implement UDP segmentation offload support
Driver API:
- PHY/SFP: improve power level switching between standard level 1 and
the higher power levels
- New API for netdev <-> devlink_port linkage
- PTP: convert existing drivers to new frequency adjustment
implementation
- DSA: add support for rx offloading
- Autoload DSA tagging driver when dynamically changing protocol
- Add new PCP and APPTRUST attributes to Data Center Bridging
- Add configuration support for 800Gbps link speed
- Add devlink port function attribute to enable/disable RoCE and
migratable
- Extend devlink-rate to support strict prioriry and weighted fair
queuing
- Add devlink support to directly reading from region memory
- New device tree helper to fetch MAC address from nvmem
- New big TCP helper to simplify temporary header stripping
New hardware / drivers:
- Ethernet:
- Marvel Octeon CNF95N and CN10KB Ethernet Switches
- Marvel Prestera AC5X Ethernet Switch
- WangXun 10 Gigabit NIC
- Motorcomm yt8521 Gigabit Ethernet
- Microchip ksz9563 Gigabit Ethernet Switch
- Microsoft Azure Network Adapter
- Linux Automation 10Base-T1L adapter
- PHY:
- Aquantia AQR112 and AQR412
- Motorcomm YT8531S
- PTP:
- Orolia ART-CARD
- WiFi:
- MediaTek Wi-Fi 7 (802.11be) devices
- RealTek rtw8821cu, rtw8822bu, rtw8822cu and rtw8723du USB
devices
- Bluetooth:
- Broadcom BCM4377/4378/4387 Bluetooth chipsets
- Realtek RTL8852BE and RTL8723DS
- Cypress.CYW4373A0 WiFi + Bluetooth combo device
Drivers:
- CAN:
- gs_usb: bus error reporting support
- kvaser_usb: listen only and bus error reporting support
- Ethernet NICs:
- Intel (100G):
- extend action skbedit to RX queue mapping
- implement devlink-rate support
- support direct read from memory
- nVidia/Mellanox (mlx5):
- SW steering improvements, increasing rules update rate
- Support for enhanced events compression
- extend H/W offload packet manipulation capabilities
- implement IPSec packet offload mode
- nVidia/Mellanox (mlx4):
- better big TCP support
- Netronome Ethernet NICs (nfp):
- IPsec offload support
- add support for multicast filter
- Broadcom:
- RSS and PTP support improvements
- AMD/SolarFlare:
- netlink extened ack improvements
- add basic flower matches to offload, and related stats
- Virtual NICs:
- ibmvnic: introduce affinity hint support
- small / embedded:
- FreeScale fec: add initial XDP support
- Marvel mv643xx_eth: support MII/GMII/RGMII modes for Kirkwood
- TI am65-cpsw: add suspend/resume support
- Mediatek MT7986: add RX wireless wthernet dispatch support
- Realtek 8169: enable GRO software interrupt coalescing per
default
- Ethernet high-speed switches:
- Microchip (sparx5):
- add support for Sparx5 TC/flower H/W offload via VCAP
- Mellanox mlxsw:
- add 802.1X and MAC Authentication Bypass offload support
- add ip6gre support
- Embedded Ethernet switches:
- Mediatek (mtk_eth_soc):
- improve PCS implementation, add DSA untag support
- enable flow offload support
- Renesas:
- add rswitch R-Car Gen4 gPTP support
- Microchip (lan966x):
- add full XDP support
- add TC H/W offload via VCAP
- enable PTP on bridge interfaces
- Microchip (ksz8):
- add MTU support for KSZ8 series
- Qualcomm 802.11ax WiFi (ath11k):
- support configuring channel dwell time during scan
- MediaTek WiFi (mt76):
- enable Wireless Ethernet Dispatch (WED) offload support
- add ack signal support
- enable coredump support
- remain_on_channel support
- Intel WiFi (iwlwifi):
- enable Wi-Fi 7 Extremely High Throughput (EHT) PHY capabilities
- 320 MHz channels support
- RealTek WiFi (rtw89):
- new dynamic header firmware format support
- wake-over-WLAN support"
* tag 'net-next-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2002 commits)
ipvs: fix type warning in do_div() on 32 bit
net: lan966x: Remove a useless test in lan966x_ptp_add_trap()
net: ipa: add IPA v4.7 support
dt-bindings: net: qcom,ipa: Add SM6350 compatible
bnxt: Use generic HBH removal helper in tx path
IPv6/GRO: generic helper to remove temporary HBH/jumbo header in driver
selftests: forwarding: Add bridge MDB test
selftests: forwarding: Rename bridge_mdb test
bridge: mcast: Support replacement of MDB port group entries
bridge: mcast: Allow user space to specify MDB entry routing protocol
bridge: mcast: Allow user space to add (*, G) with a source list and filter mode
bridge: mcast: Add support for (*, G) with a source list and filter mode
bridge: mcast: Avoid arming group timer when (S, G) corresponds to a source
bridge: mcast: Add a flag for user installed source entries
bridge: mcast: Expose __br_multicast_del_group_src()
bridge: mcast: Expose br_multicast_new_group_src()
bridge: mcast: Add a centralized error path
bridge: mcast: Place netlink policy before validation functions
bridge: mcast: Split (*, G) and (S, G) addition into different functions
bridge: mcast: Do not derive entry type from its filter mode
...
This commit adds a few words to the informative message that appears
every ten seconds in RCU Tasks and RCU Tasks Trace grace periods.
This message currently reads as follows:
rcu_tasks_wait_gp: rcu_tasks grace period 1046 is 10088 jiffies old.
After this change, it provides additional context, instead reading
as follows:
rcu_tasks_wait_gp: rcu_tasks grace period number 1046 (since boot) is 10088 jiffies old.
Reported-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
As an accident of implementation, an RCU Tasks Trace grace period also
acts as an RCU grace period. However, this could change at any time.
This commit therefore creates an rcu_trace_implies_rcu_gp() that currently
returns true to codify this accident. Code relying on this accident
must call this function to verify that this accident is still happening.
Reported-by: Hou Tao <houtao@huaweicloud.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Martin KaFai Lau <martin.lau@linux.dev>
Link: https://lore.kernel.org/r/20221014113946.965131-2-houtao@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The RCU Tasks Trace grace-period kthread loops across all CPUs, and
there can be quite a few CPUs, with some commercially available systems
sporting well over a thousand of them. Some of these loops can feature
IPIs, which can take some time. This commit therefore places a call to
cond_resched_tasks_rcu_qs() in each such loop.
Link: https://docs.google.com/document/d/1V0YnG1HTWMt9WHJjroiJL9lf-hMrud4v8Fn3fhyY0cI/edit?usp=sharing
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Kernels built with CONFIG_PROVE_RCU=y and CONFIG_DEBUG_LOCK_ALLOC=y
attempt to emit a warning when the synchronize_rcu_tasks_generic()
function is called during early boot while the rcu_scheduler_active
variable is RCU_SCHEDULER_INACTIVE. However the warnings is not
actually be printed because the debug_lockdep_rcu_enabled() returns
false, exactly because the rcu_scheduler_active variable is still equal
to RCU_SCHEDULER_INACTIVE.
This commit therefore replaces RCU_LOCKDEP_WARN() with WARN_ONCE()
to force these warnings to actually be printed.
Signed-off-by: Zqiang <qiang1.zhang@intel.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Commit 2585014188d5 ("rcu-tasks: Be more patient for RCU Tasks
boot-time testing") fixes false positive rcu_tasks verification check
failure by repeating the test once every second until timeout using
schedule_timeout_uninterruptible().
Since rcu_tasks_verify_selft_tests() is called from do_initcalls()
as a late_initcall, this has the undesirable side effect of delaying
other late_initcall's queued after it by a second or more. Fix this by
instead using delayed_work to repeat the verification check.
Fixes: 2585014188d5 ("rcu-tasks: Be more patient for RCU Tasks boot-time testing")
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The RCU-Tasks family of grace-period primitives can take some time to
complete, and the amount of time can depend on the exact hardware and
software configuration. Some configurations boot up fast enough that the
RCU-Tasks verification process gets false-positive failures. This commit
therefore allows up to 30 seconds for the grace periods to complete, with
this value adjustable downwards using the rcupdate.rcu_task_stall_timeout
kernel boot parameter.
Reported-by: Matthew Wilcox <willy@infradead.org>
Reported-by: Zhouyi Zhou <zhouzhouyi@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Tested-by: Zhouyi Zhou <zhouzhouyi@gmail.com>
Tested-by: Mark Rutland <mark.rutland@arm.com>
This commit updates comments to reflect the changes in the series
of commits that eliminated the full task-list scan.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Cc: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: KP Singh <kpsingh@kernel.org>
The rcu_tasks_trace_pregp_step() function invokes cpus_read_lock() to
disable CPU hotplug, and a later call to the rcu_tasks_trace_postscan()
function invokes cpus_read_unlock() to re-enable it. This was absolutely
necessary in the past in order to protect the intervening scan of the full
tasks list, but there is no longer such a scan. This commit therefore
improves readability by moving the cpus_read_unlock() call to the end
of the rcu_tasks_trace_pregp_step() function. This commit is a pure
code-motion commit without any (intended) change in functionality.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Cc: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: KP Singh <kpsingh@kernel.org>
Currently, the RCU Tasks Trace grace-period kthread IPIs each online CPU
using smp_call_function_single() in order to track any tasks currently in
RCU Tasks Trace read-side critical sections during which the corresponding
task has neither blocked nor been preempted. These IPIs are annoying
and are also not strictly necessary because any task that blocks or is
preempted within its current RCU Tasks Trace read-side critical section
will be tracked on one of the per-CPU rcu_tasks_percpu structure's
->rtp_blkd_tasks list. So the only time that this is a problem is if
one of the CPUs runs through a long-duration RCU Tasks Trace read-side
critical section without a context switch.
Note that the task_call_func() function cannot help here because there is
no safe way to identify the target task. Of course, the task_call_func()
function will be very useful later, when processing the list of tasks,
but it needs to know the task.
This commit therefore creates a cpu_curr_snapshot() function that returns
a pointer the task_struct structure of some task that happened to be
running on the specified CPU more or less during the time that the
cpu_curr_snapshot() function was executing. If there was no context
switch during this time, this function will return a pointer to the
task_struct structure of the task that was running throughout. If there
was a context switch, then the outgoing task will be taken care of by
RCU's context-switch hook, and the incoming task was either already taken
care during some previous context switch, or it is not currently within an
RCU Tasks Trace read-side critical section. And in this latter case, the
grace period already started, so there is no need to wait on this task.
This new cpu_curr_snapshot() function is invoked on each CPU early in
the RCU Tasks Trace grace-period processing, and the resulting tasks
are queued for later quiescent-state inspection.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: KP Singh <kpsingh@kernel.org>
This commit maintains a new n_trc_holdouts counter that tracks the number
of tasks blocking the RCU Tasks grace period. This counter is useful
for debugging, and its value has been added to a diagostic message.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Cc: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: KP Singh <kpsingh@kernel.org>
This commit takes off the training wheels and relies only on scanning
currently running tasks and tasks that have blocked or been preempted
within their current RCU Tasks Trace read-side critical section.
Before this commit, the time complexity of an RCU Tasks Trace grace
period is O(T), where T is the number of tasks. After this commit,
this time complexity is O(C+B), where C is the number of CPUs and B
is the number of tasks that have blocked (or been preempted) at least
once during their current RCU Tasks Trace read-side critical sections.
Of course, if all tasks have blocked (or been preempted) at least once
during their current RCU Tasks Trace read-side critical sections, this is
still O(T), but current expectations are that RCU Tasks Trace read-side
critical section will be short and that there will normally not be large
numbers of tasks blocked within such a critical section.
Dave Marchevsky kindly measured the effects of this commit on the RCU
Tasks Trace grace-period latency and the rcu_tasks_trace_kthread task's
CPU consumption per RCU Tasks Trace grace period over the course of a
fixed test, all in milliseconds:
Before After
GP latency 22.3 ms stddev > 0.1 17.0 ms stddev < 0.1
GP CPU 2.3 ms stddev 0.3 1.1 ms stddev 0.2
This was on a system with 15,000 tasks, so it is reasonable to expect
much larger savings on the systems on which this issue was first noted,
given that they sport well in excess of 100,000 tasks. CPU consumption
was measured using profiling techniques.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Cc: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: KP Singh <kpsingh@kernel.org>
Tested-by: Dave Marchevsky <davemarchevsky@fb.com>
Now that RCU scans both running tasks and tasks that have blocked within
their current RCU Tasks Trace read-side critical section, there is no
need for it to scan the idle tasks. After all, an idle loop should not
be remain within an RCU Tasks Trace read-side critical section across
exit from idle, and from a BPF viewpoint, functions invoked from the
idle loop should not sleep. So only running idle tasks can be within
RCU Tasks Trace read-side critical sections.
This commit therefore removes the scan of the idle tasks from the
rcu_tasks_trace_postscan() function.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Cc: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: KP Singh <kpsingh@kernel.org>
This commit scans each CPU's ->rtp_blkd_tasks list, adding them to
the list of holdout tasks. This will cause the current RCU Tasks Trace
grace period to wait until these tasks exit their RCU Tasks Trace
read-side critical sections. This commit will enable later work
omitting the scan of the full task list.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Cc: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: KP Singh <kpsingh@kernel.org>
A running task might be within an RCU Tasks Trace read-side critical
section for any length of time, but will not be placed on any of the
per-CPU rcu_tasks_percpu structure's ->rtp_blkd_tasks lists. Therefore
any RCU Tasks Trace grace-period processing that does not scan the full
task list must interact with the running tasks.
This commit therefore causes the rcu_tasks_trace_pregp_step() function
to IPI each CPU in order to place the corresponding task on the holdouts
list and to record whether or not it was in an RCU Tasks Trace read-side
critical section. Yes, it is possible to avoid adding it to that list
if it is not a reader, but that would prevent the system from remembering
that this task was in a quiescent state. Which is why the running tasks
are unconditionally added to the holdout list.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Cc: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: KP Singh <kpsingh@kernel.org>
This commit adds checks within rcu_tasks_trace_pertask() to avoid
duplicate (and destructive) additions to the holdouts list. These checks
will be required later due to the possibility of a given task having
blocked while in an RCU Tasks Trace read-side critical section, but now
running on a CPU.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Cc: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: KP Singh <kpsingh@kernel.org>
This is a code-motion-only commit that moves rcu_tasks_trace_pertask()
to precede rcu_tasks_trace_pregp_step(), so that the latter will be
able to invoke the other without forward references.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Cc: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: KP Singh <kpsingh@kernel.org>
This commit adds a "B" indicator to the RCU Tasks Trace CPU stall warning
when the task has blocked within its current read-side critical section.
This serves as a debugging aid.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Cc: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: KP Singh <kpsingh@kernel.org>
This commit causes rcu_read_unlock_trace() to check for the current
task being on a per-CPU list within the rcu_tasks_percpu structure,
and removes it from that list if so. This has the effect of curtailing
tracking of a task that blocked within an RCU Tasks Trace read-side
critical section once it exits that critical section.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Cc: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: KP Singh <kpsingh@kernel.org>
This commit places any task that has ever blocked within its current
RCU Tasks Trace read-side critical section on a per-CPU list within the
rcu_tasks_percpu structure. Tasks are removed from this list when they
exit by the exit_tasks_rcu_finish_trace() function. The purpose of this
commit is to provide the information needed to eliminate the current
scan of the full task list.
This commit offsets the INT_MIN value for ->trc_reader_nesting with the
new nesting level in order to avoid queueing tasks that are exiting
their read-side critical sections.
[ paulmck: Apply kernel test robot feedback. ]
[ paulmck: Apply feedback from syzbot+9bb26e7c5e8e4fa7e641@syzkaller.appspotmail.com ]
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Tested-by: syzbot <syzbot+9bb26e7c5e8e4fa7e641@syzkaller.appspotmail.com>
Tested-by: "Zhang, Qiang1" <qiang1.zhang@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: KP Singh <kpsingh@kernel.org>
This commit adds fields to task_struct and to rcu_tasks_percpu that will
be used to avoid the task-list scan for RCU Tasks Trace grace periods,
and also initializes these fields.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Cc: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: KP Singh <kpsingh@kernel.org>
When a CPU is offline, its idle task can appear to be running, but it
cannot be doing anything while CPU-hotplug operations are excluded.
This commit takes advantage of that fact by making trc_check_slow_task()
check for task_curr(t) && cpu_online(task_cpu(t)), and recording
full information in that case.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: KP Singh <kpsingh@kernel.org>
Currently, the RCU Tasks Trace CPU stall warning simply indicates
whether or not the .b.need_qs field is zero. This commit shows the
three permitted values and flags other values with either "!" or "?".
This is a debugging aid.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Cc: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: KP Singh <kpsingh@kernel.org>
This commit tags offline CPUs with "(offline)" in RCU Tasks Trace CPU
stall warnings. This is a debugging aid.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Cc: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: KP Singh <kpsingh@kernel.org>
This commit adds a "I" indicator to the RCU Tasks Trace CPU stall
warning when an IPI directed to a task has thus far failed to arrive.
This serves as a debugging aid.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Cc: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: KP Singh <kpsingh@kernel.org>
Currently, trc_inspect_reader() does one check for nesting less than
or equal to zero, then sorts out the distinctions within this single
"if" statement. This commit simplifies the logic by providing one
"if" statement for quiescent states (nesting of zero) and another "if"
statement for transitioning from one nesting level to another or the
outermost rcu_read_unlock_trace() (negative nesting).
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Cc: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: KP Singh <kpsingh@kernel.org>
Because the task driving the grace-period kthread is in quiescent state
throughout, this commit excludes it from the list of tasks from which
a quiescent state is needed.
This does mean that attaching a sleepable BPF program to function in
kernel/rcu/tasks.h is a bad idea, by the way.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Cc: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: KP Singh <kpsingh@kernel.org>
This commit identifies idle tasks for recently offlined CPUs as residing
in a quiescent state. This is safe only because CPU-hotplug operations
are excluded during these checks.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Cc: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: KP Singh <kpsingh@kernel.org>
Any idle task corresponding to an offline CPU is in an RCU Tasks Trace
quiescent state. This commit causes rcu_tasks_trace_postscan() to ignore
idle tasks for offline CPUs, which it can do safely due to CPU-hotplug
operations being disabled.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Cc: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: KP Singh <kpsingh@kernel.org>
This commit replaces the pair of READ_ONCE(t->trc_reader_nesting) calls
with a single such call and a local variable. This makes the code's
intent more clear.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Cc: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: KP Singh <kpsingh@kernel.org>
Now that tasks are not removed from the list until they have responded to
any needed request for a quiescent state, it is no longer necessary to
wait for the trc_n_readers_need_end counter to go to zero. This commit
therefore removes that waiting code.
It is therefore also no longer necessary for rcu_tasks_trace_postgp() to
do the final decrement of this counter, so that code is also removed.
This in turn means that trc_n_readers_need_end counter itself can
be removed, as can the rcu_tasks_trace_iw irq_work structure and the
rcu_read_unlock_iw() function.
[ paulmck: Apply feedback from Zqiang. ]
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Cc: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: KP Singh <kpsingh@kernel.org>
This commit gets rid of the task_struct structure's ->trc_reader_checked
field, making it instead be a bit within the task_struct structure's
existing ->trc_reader_special.b.need_qs field. This commit also
atomically loads, stores, and checks the resulting combination of the
reader-checked and need-quiescent state flags. This will in turn allow
significant simplification of the rcu_tasks_trace_postgp() function
as well as elimination of the trc_n_readers_need_end counter in later
commits. These changes will in turn simplify later elimination of the
RCU Tasks Trace scan of the task list, which will make RCU Tasks Trace
grace periods less CPU-intensive.
[ paulmck: Apply kernel test robot feedback. ]
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Cc: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: KP Singh <kpsingh@kernel.org>
This commit causes synchronous grace periods to be driven from the task
invoking synchronize_rcu_*(), allowing these functions to be invoked from
the mid-boot dead zone extending from when the scheduler was initialized
to to point that the various RCU tasks grace-period kthreads are spawned.
This change will allow the self-tests to run in a consistent manner.
Reported-by: Matthew Wilcox <willy@infradead.org>
Reported-by: Zhouyi Zhou <zhouzhouyi@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This is strictly a code-motion commit that moves the
synchronize_rcu_tasks_generic() down to where it can invoke
rcu_tasks_one_gp() without the need for a forward declaration.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit abstracts most of the rcu_tasks_kthread() function's loop
body into a new rcu_tasks_one_gp() function. It also introduces
a new ->tasks_gp_mutex to synchronize concurrent calls to this new
rcu_tasks_one_gp() function. This commit is preparation for allowing
RCU tasks grace periods to be driven by the calling task during the
mid-boot dead zone.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit adds a debugging scan for callbacks that got lost during a
callback-queueing transition.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
If the cpu_possible_mask is sparse (for example, if bits are set only for
CPUs 0, 4, 8, ...), then rcu_tasks_invoke_cbs() will access per-CPU data
for a CPU not in cpu_possible_mask. It makes these accesses while doing
a workqueue-based binary search for non-empty callback lists. Although
this search must pass through CPUs not represented in cpu_possible_mask,
it has no need to check the callback list for such CPUs.
This commit therefore changes the rcu_tasks_invoke_cbs() function's
binary search so as to only check callback lists for CPUs present in
cpu_possible_mask.
Reported-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
If the rcupdate.rcu_task_enqueue_lim kernel boot parameter is set to
something greater than 1 and less than nr_cpu_ids, the code attempts to
use a subset of the CPU's RCU Tasks callback lists. This works, but only
if the cpu_possible_mask is contiguous. If there are "holes" in this
mask, the callback-enqueue code might attempt to access a non-existent
per-CPU ->rtcpu variable for a non-existent CPU. For example, if only
CPUs 0, 4, 8, 12, 16 and so on are in cpu_possible_mask, specifying
rcupdate.rcu_task_enqueue_lim=4 would cause the code to attempt to
use callback queues for non-existent CPUs 1, 2, and 3. Because such
systems have existed in the past and might still exist, the code needs
to gracefully handle this situation.
This commit therefore checks to see whether the desired CPU is present
in cpu_possible_mask, and, if not, searches for the next CPU. This means
that the systems administrator of a system with a sparse cpu_possible_mask
will need to account for this sparsity when specifying the value of
the rcupdate.rcu_task_enqueue_lim kernel boot parameter. For example,
setting this parameter to the value 4 will use only CPUs 0 and 4, which
CPU 4 getting three times the callback load of CPU 0.
This commit assumes that bit (nr_cpu_ids - 1) is always set in
cpu_possible_mask.
Link: https://lore.kernel.org/lkml/CANn89iKaNEwyNZ=L_PQnkH0LP_XjLYrr_dpyRKNNoDJaWKdrmg@mail.gmail.com/
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Currently, the show_rcu_tasks_generic_gp_kthread() function only looks
at CPU 0's callback lists. Although this is not fatal, it can confuse
debugging efforts in cases where any of the Tasks RCU flavors are in
per-CPU queueing mode. This commit therefore causes this function to
scan all CPUs' callback queues.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The use of hrtimers for RCU-tasks grace-period delays works well in
general, but can result in excessive grace-period delays for some
corner-case workloads. This commit therefore reverts to the use of
timers for non-RT kernels to mitigate those grace-period delays.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The synchronous RCU-tasks grace-period-wait primitives invoke
schedule_timeout_idle() to give readers a chance to exit their
read-side critical sections. Unfortunately, this fails during early
boot on PREEMPT_RT because PREEMPT_RT relies solely on ksoftirqd to run
timer handlers. Because ksoftirqd cannot operate until its kthreads
are spawned, there is a brief period of time following scheduler
initialization where PREEMPT_RT cannot run the timer handlers that
schedule_timeout_idle() relies on, resulting in a hang.
To avoid this boot-time hang, this commit replaces schedule_timeout_idle()
with schedule_hrtimeout(), so that the timer expires in hardirq context.
This is ensures that the timer fires even on PREEMPT_RT throughout the
irqs-enabled portions of boot as well as during runtime.
The timer is set to expire between fract and fract + HZ / 2 jiffies in
order to align with any other timers that might expire during that time,
thus reducing the number of wakeups.
Note that RCU-tasks grace periods are infrequent, so the use of hrtimer
should be fine. In contrast, in common-case code, user of hrtimer
could result in performance issues.
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
