IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Implement Host Performance Buffer (HPB) initialization and add function
calls to UFS core driver.
NAND flash-based storage devices, including UFS, have mechanisms to
translate logical addresses of I/O requests to the corresponding physical
addresses of the flash storage. In UFS, logical-to-physical-address (L2P)
map data, which is required to identify the physical address for the
requested I/Os, can only be partially stored in SRAM from NAND flash. Due
to this partial loading, accessing the flash address area, where the L2P
information for that address is not loaded in the SRAM, can result in
serious performance degradation.
The basic concept of HPB is to cache L2P mapping entries in host system
memory so that both physical block address (PBA) and logical block address
(LBA) can be delivered in HPB read command. The HPB read command allows to
read data faster than a regular read command in UFS since it provides the
physical address (HPB Entry) of the desired logical block in addition to
its logical address. The UFS device can access the physical block in NAND
directly without searching and uploading L2P mapping table. This improves
read performance because the NAND read operation for uploading L2P mapping
table is removed.
In HPB initialization, the host checks if the UFS device supports HPB
feature and retrieves related device capabilities. Then, HPB parameters are
configured in the device.
Total start-up time of popular applications was measured and the difference
observed between HPB being enabled and disabled. Popular applications are
12 game apps and 24 non-game apps. Each test cycle consists of running 36
applications in sequence. We repeated the cycle for observing performance
improvement by L2P mapping cache hit in HPB.
The following is the test environment:
- kernel version: 4.4.0
- RAM: 8GB
- UFS 2.1 (64GB)
Results:
+-------+----------+----------+-------+
| cycle | baseline | with HPB | diff |
+-------+----------+----------+-------+
| 1 | 272.4 | 264.9 | -7.5 |
| 2 | 250.4 | 248.2 | -2.2 |
| 3 | 226.2 | 215.6 | -10.6 |
| 4 | 230.6 | 214.8 | -15.8 |
| 5 | 232.0 | 218.1 | -13.9 |
| 6 | 231.9 | 212.6 | -19.3 |
+-------+----------+----------+-------+
We also measured HPB performance using iozone:
$ iozone -r 4k -+n -i2 -ecI -t 16 -l 16 -u 16 -s $IO_RANGE/16 -F \
mnt/tmp_1 mnt/tmp_2 mnt/tmp_3 mnt/tmp_4 mnt/tmp_5 mnt/tmp_6 mnt/tmp_7 \
mnt/tmp_8 mnt/tmp_9 mnt/tmp_10 mnt/tmp_11 mnt/tmp_12 mnt/tmp_13 \
mnt/tmp_14 mnt/tmp_15 mnt/tmp_16
Results:
+----------+--------+---------+
| IO range | HPB on | HPB off |
+----------+--------+---------+
| 1 GB | 294.8 | 300.87 |
| 4 GB | 293.51 | 179.35 |
| 8 GB | 294.85 | 162.52 |
| 16 GB | 293.45 | 156.26 |
| 32 GB | 277.4 | 153.25 |
+----------+--------+---------+
Link: https://lore.kernel.org/r/20210712085830epcms2p8c1288b7f7a81b044158a18232617b572@epcms2p8
Reported-by: kernel test robot <lkp@intel.com>
Tested-by: Bean Huo <beanhuo@micron.com>
Tested-by: Can Guo <cang@codeaurora.org>
Tested-by: Stanley Chu <stanley.chu@mediatek.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Can Guo <cang@codeaurora.org>
Reviewed-by: Bean Huo <beanhuo@micron.com>
Reviewed-by: Stanley Chu <stanley.chu@mediatek.com>
Acked-by: Avri Altman <Avri.Altman@wdc.com>
Signed-off-by: Daejun Park <daejun7.park@samsung.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The macros cpu_to_le16() and cpu_to_le32() have special cases for
constants. Their __constant_<foo> versions are not required.
On little endian systems, both cpu_to_le16() and __constant_cpu_to_le16()
expand to the same expression. Same is the case with cpu_to_le32().
On big endian systems, cpu_to_le16() expands to __swab16() which has a
__builtin_constant_p check. Similarly, cpu_to_le32() expands to __swab32().
Consequently these macros can be safely used with constants, and hence all
those uses are converted. This was discovered as a part of a checkpatch
evaluation, looking at all reports of WARNING:CONSTANT_CONVERSION error
type.
Link: https://lore.kernel.org/r/20210716112852.24598-1-dwaipayanray1@gmail.com
Signed-off-by: Dwaipayan Ray <dwaipayanray1@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
An earlier fix changed the print format specifier for adapter->bios_addr to
use %lX. However, the integer is a u32 so the fix was wrong. Fix this by
using the correct %X format specifier.
Link: https://lore.kernel.org/r/20210730095031.26981-1-colin.king@canonical.com
Fixes: 43622697117c ("scsi: BusLogic: use %lX for unsigned long rather than %X")
Acked-by: Khalid Aziz <khalid@gonehiking.org>
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Addresses-Coverity: ("Invalid type in argument")
Existing blogic_msg() invocations do not appear to overrun its internal
buffer of a fixed length of 100, which would cause stack corruption, but
it's easy to miss with possible further updates and a fix is cheap in
performance terms, so limit the output produced into the buffer by using
vscnprintf() rather than vsprintf().
Link: https://lore.kernel.org/r/alpine.DEB.2.21.2104201939390.44318@angie.orcam.me.uk
Acked-by: Khalid Aziz <khalid@gonehiking.org>
Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Set ret to 0 after the initial permission checks to avoid leaking -EPERM
for commands without data transfer.
Link: https://lore.kernel.org/r/20210731074027.1185545-2-hch@lst.de
Fixes: 75ca56409e5b ("scsi: bsg: Move the whole request execution into the SCSI/transport handlers")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Allow UFS suspend/resume callbacks to run in parallel with other
suspend/resume callbacks. This can recoup dozens of milliseconds on the
resume path if UFS hardware needs to be powered back on.
Suspending and resuming asynchronously is safe to do so long as the driver
callbacks only depend on resources made available by either a) parent
devices or b) devices explicitly marked as suppliers with device_link_add.
Link: https://lore.kernel.org/r/20210728012743.1063928-1-paillon@google.com
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Jaegeuk Kim <jaegeuk@kernel.org>
Cc: Bart Van Assche <bvanassche@acm.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Stanley Chu <stanley.chu@mediatek.com>
Cc: Can Guo <cang@codeaurora.org>
Cc: Asutosh Das <asutoshd@codeaurora.org>
Cc: Avri Altman <avri.altman@wdc.com>
Cc: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Vincent Palomares <paillon@google.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The lpfc_sli4_nvmet_xri_aborted() routine takes out the abts_buf_list_lock
and traverses the buffer contexts to match the xri. Upon match, it then
takes the context lock before potentially removing the context from the
associated buffer list. This violates the lock hierarchy used elsewhere in
the driver of locking context, then the abts_buf_list_lock - thus a
possible deadlock.
Resolve by: after matching, release the abts_buf_list_lock, then take the
context lock, and if to be deleted from the list, retake the
abts_buf_list_lock, maintaining lock hierarchy. This matches same list lock
hierarchy as elsewhere in the driver
Link: https://lore.kernel.org/r/20210730163309.25809-1-jsmart2021@gmail.com
Reported-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
There are two spelling mistakes with the same triple l in alloc, one in a
comment, the other in a ql_dbg() debug message. Fix them.
Link: https://lore.kernel.org/r/20210729082413.4761-1-colin.king@canonical.com
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Remove the amount of indirect calls by making the handler responsible for
the entire execution of the request.
Link: https://lore.kernel.org/r/20210729064845.1044147-5-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Move the sg_timeout and sg_reserved_size fields into the bsg_device and
scsi_device structures as they have nothing to do with generic block I/O.
Note that these values are now separate for bsg vs. SCSI device node
access, but that just matches how /dev/sg vs the other nodes has always
behaved.
Link: https://lore.kernel.org/r/20210729064845.1044147-4-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Use the per-device cdev_device_interface to store the bsg data in the char
device inode, and thus remove the need to embedd the bsg_class_device
structure in the request_queue.
Link: https://lore.kernel.org/r/20210729064845.1044147-2-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
cdrom_read_cdda_bpc() relies on sending SCSI command to the low level
driver using a REQ_OP_SCSI_IN request. This isn't generic block layer
functionality, so move the actual low-level code into the sr driver and
call it through a new read_cdda_bpc method in the cdrom_device_ops
structure.
With this the CDROM code does not have to pull in scsi_normalize_sense()
and depend on CONFIG_SCSI_COMMON.
Link: https://lore.kernel.org/r/20210730072752.GB23847%40lst.de
Tested-by: Anders Roxell <anders.roxell@linaro.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
After adding physical volumes to a volume group through vgextend, the
kernel will rescan the partitions. This in turn will cause the device
capacity to be queried.
If the device status is set to offline through sysfs at this time, READ
CAPACITY command will return a result which the host byte is
DID_NO_CONNECT, and the capacity of the device will be set to zero in
read_capacity_error(). After setting device status back to running, the
capacity of the device will remain stuck at zero.
Fix this issue by rescanning device when the device state changes to
SDEV_RUNNING.
Link: https://lore.kernel.org/r/20210727034455.1494960-1-lijinlin3@huawei.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: lijinlin <lijinlin3@huawei.com>
Signed-off-by: Wu Bo <wubo40@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Media event code 3 is defined in the MMC-6 spec as follows:
"MediaRemoval: The media has been removed from the specified slot, and
the Drive is unable to access the media without user intervention. This
applies to media changers only."
This indicated that treating the condition as an EJECT_REQUEST was
appropriate. However, doing so had the unfortunate side-effect of causing
the drive tray to be physically ejected on resume. Instead treat the event
as a MEDIA_CHANGE request.
Fixes: 7dd753ca59d6 ("scsi: sr: Return appropriate error code when disk is ejected")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=213759
Link: https://lore.kernel.org/r/20210726114913.6760-1-limanyi@uniontech.com
Signed-off-by: Li Manyi <limanyi@uniontech.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Prior to commit 1f4a4a19508d ("scsi: ibmvfc: Complete commands outside the
host/queue lock") responses to commands were completed sequentially with
the host lock held such that a command had a basic binary state of active
or free. It was therefore a simple affair of ensuring the assocaiated
ibmvfc_event to a VIOS response was valid by testing that it was not
already free. The lock relexation work to complete commands outside the
lock inadverdently made it a trinary command state such that a command is
either in flight, received and being completed, or completed and now
free. This breaks the stale command detection logic as a command may be
still marked active and been placed on the delayed completion list when a
second stale response for the same command arrives. This can lead to double
completions and list corruption. This issue was exposed by a recent VIOS
regression were a missing memory barrier could occasionally result in the
ibmvfc client receiving a duplicate response for the same command.
Fix the issue by introducing the atomic ibmvfc_event.active to track the
trinary state of a command. The state is explicitly set to 1 when a command
is successfully sent. The CRQ response handlers use
atomic_dec_if_positive() to test for stale responses and correctly
transition to the completion state when a active command is received.
Finally, atomic_dec_and_test() is used to sanity check transistions when
commands are freed as a result of a completion, or moved to the purge list
as a result of error handling or adapter reset.
Link: https://lore.kernel.org/r/20210716205220.1101150-1-tyreld@linux.ibm.com
Fixes: 1f4a4a19508d ("scsi: ibmvfc: Complete commands outside the host/queue lock")
Cc: stable@vger.kernel.org
Signed-off-by: Tyrel Datwyler <tyreld@linux.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Avoid printing a 'target allocation failed' error if the driver
target_alloc() callback function returns -ENXIO. This return value
indicates that the corresponding H:C:T:L entry is empty.
Removing this error reduces the scan time if the user issues SCAN_WILD_CARD
scan operation through sysfs parameter on a host with a lot of empty
H:C:T:L entries.
Avoiding the printk on -ENXIO matches the behavior of the other callback
functions during scanning.
Link: https://lore.kernel.org/r/20210726115402.1936-1-sreekanth.reddy@broadcom.com
Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Fix the following fallthrough warning (on ARM):
drivers/scsi/arm/fas216.c:1379:2: warning: unannotated fall-through between switch labels [-Wimplicit-fallthrough]
default:
^
drivers/scsi/arm/fas216.c:1379:2: note: insert 'break;' to avoid fall-through
default:
^
break;
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/lkml/202107260355.bF00i5bi-lkp@intel.com/
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Fix the following fallthrough warning (on ARM):
drivers/scsi/arm/acornscsi.c:2651:2: warning: unannotated fall-through between switch labels [-Wimplicit-fallthrough]
case res_success:
^
drivers/scsi/arm/acornscsi.c:2651:2: note: insert '__attribute__((fallthrough));' to silence this warning
case res_success:
^
__attribute__((fallthrough));
drivers/scsi/arm/acornscsi.c:2651:2: note: insert 'break;' to avoid fall-through
case res_success:
^
break;
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/lkml/202107260355.bF00i5bi-lkp@intel.com/
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
The list_for_each_entry() iterator, "adapter" in this code, can never be
NULL. If we exit the loop without finding the correct adapter then
"adapter" points invalid memory that is an offset from the list head. This
will eventually lead to memory corruption and presumably a kernel crash.
Link: https://lore.kernel.org/r/20210708074642.23599-1-harshvardhan.jha@oracle.com
Acked-by: Sumit Saxena <sumit.saxena@broadcom.com>
Signed-off-by: Harshvardhan Jha <harshvardhan.jha@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The TMF timeout timer may trigger at the same time when the response from a
controller is being handled. When this happens the SAS task may get freed
before the response processing is finished.
Fix this by calling complete() only when SAS_TASK_STATE_DONE is not set.
A similar race condition was fixed in commit b90cd6f2b905 ("scsi: libsas:
fix a race condition when smp task timeout")
Link: https://lore.kernel.org/r/20210707185945.35559-1-ipylypiv@google.com
Reviewed-by: Vishakha Channapattan <vishakhavc@google.com>
Acked-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Igor Pylypiv <ipylypiv@google.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Split the SCSI_IOCTL_GET_IDLUN handler from the main scsi_ioctl() routine.
Link: https://lore.kernel.org/r/20210724072033.1284840-23-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Factor out a helper for the various flavors of START STOP UNIT command
ioctls.
Link: https://lore.kernel.org/r/20210724072033.1284840-22-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Remove the comment above ioctl_internal_command() which doesn't document
this function at all.
Link: https://lore.kernel.org/r/20210724072033.1284840-21-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
CONFIG_BLK_SCSI_REQUEST is rather misnamed as it enables building a small
amount of code shared by the SCSI initiator, target, and consumers of the
scsi_request passthrough API. Rename it and also allow building it as a
module.
[mkp: add module license]
Link: https://lore.kernel.org/r/20210724072033.1284840-20-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Merge the ioctl handling in block/scsi_ioctl.c into its only caller in
drivers/scsi/scsi_ioctl.c.
Link: https://lore.kernel.org/r/20210724072033.1284840-19-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Remove the separate command filter structure and just use a switch
statement (which also cought two duplicate commands), return a bool and
give the function a sensible name.
Link: https://lore.kernel.org/r/20210724072033.1284840-18-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Move the SCSI-specific bsg code in the SCSI midlayer instead of in the
common bsg code. This just keeps the common bsg code block/ and also
allows building it as a module.
Link: https://lore.kernel.org/r/20210724072033.1284840-15-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Ensure SCSI ULD only has to call a single ioctl helper. This also adds a
bunch of missing ioctls to the ch driver, and removes the need for a
duplicate implementation of SCSI_IOCTL_SEND_COMMAND command.
Link: https://lore.kernel.org/r/20210724072033.1284840-12-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Manually verify that the device is not a partition and the caller has admin
privіleges at the beginning of the sr ioctl method and open code the
trivial check for sd as well.
Link: https://lore.kernel.org/r/20210724072033.1284840-11-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Only the sr driver can handle SCSI passthrough requests, so move the call
to scsi_cmd_blk_ioctl() there.
Link: https://lore.kernel.org/r/20210724072033.1284840-9-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Merge st_ioctl_common() into st_ioctl() and streamline the invocation of
the common ioctl helpers.
Link: https://lore.kernel.org/r/20210724072033.1284840-8-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Just handle the compat case in scsi_ioctl() using in_compat_syscall().
Link: https://lore.kernel.org/r/20210724072033.1284840-7-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Merge the native and compat ioctl handlers into a single one using
in_compat_syscall().
Link: https://lore.kernel.org/r/20210724072033.1284840-6-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Merge the native and compat ioctl handlers into a single one using
in_compat_syscall().
Link: https://lore.kernel.org/r/20210724072033.1284840-5-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Merge the native and compat ioctl handlers into a single one using
in_compat_syscall(), and also simplify the calling conventions by merging
sd_ioctl_common() into sd_ioctl().
Link: https://lore.kernel.org/r/20210724072033.1284840-4-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Merge the native and compat ioctl handlers into a single one using
in_compat_syscall().
Link: https://lore.kernel.org/r/20210724072033.1284840-3-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Increment the command and the completion counts.
Link: https://lore.kernel.org/r/20210624052606.21613-11-njavali@marvell.com
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Some FC adapters from Marvell offer the ability to encrypt data in flight
(EDIF). This feature requires an application to act as an authenticator.
After the completion of PLOGI, both sides have authenticated and PRLI
completed, encrypted I/Os are allowed to proceed.
- Use new firmware API to encrypt traffic on the wire
- Add driver parameter to enable|disable EDIF feature
# modprobe qla2xxx ql2xsecenable=1
Link: https://lore.kernel.org/r/20210624052606.21613-10-njavali@marvell.com
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Co-developed-by: Larry Wisneski <Larry.Wisneski@marvell.com>
Signed-off-by: Larry Wisneski <Larry.Wisneski@marvell.com>
Co-developed-by: Duane Grigsby <duane.grigsby@marvell.com>
Signed-off-by: Duane Grigsby <duane.grigsby@marvell.com>
Co-developed-by: Rick Hicksted Jr <rhicksted@marvell.com>
Signed-off-by: Rick Hicksted Jr <rhicksted@marvell.com>
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Some FC adapters from Marvell offer the ability to encrypt data in flight
(EDIF). This feature requires an application to act as an authenticator.
During runtime, driver and authentication application need to stay in sync
in terms of: Session being down|up, arrival of new authentication
message (AUTH ELS) and SADB update completion.
These events are queued up as doorbell to the authentication
application. Application would read this doorbell on regular basis to stay
up to date. Each SCSI host would have a separate doorbell queue.
The doorbell interface can daisy chain a list of events for each read. Each
event contains an event code + hint to help application steer the next
course of action.
Link: https://lore.kernel.org/r/20210624052606.21613-9-njavali@marvell.com
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Co-developed-by: Larry Wisneski <Larry.Wisneski@marvell.com>
Signed-off-by: Larry Wisneski <Larry.Wisneski@marvell.com>
Co-developed-by: Duane Grigsby <duane.grigsby@marvell.com>
Signed-off-by: Duane Grigsby <duane.grigsby@marvell.com>
Co-developed-by: Rick Hicksted Jr <rhicksted@marvell.com>
Signed-off-by: Rick Hicksted Jr <rhicksted@marvell.com>
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Some FC adapters from Marvell offer the ability to encrypt data in flight
(EDIF). This feature requires an application to act as an authenticator.
There is no FC switch scan service that can indicate whether a device is
secure or non-secure.
In order to detect whether the remote port supports encrypted operation,
driver must first do a PLOGI with the remote device. On completion of the
PLOGI, driver will query firmware to see if the device supports secure
login. To do that, driver + firmware must advertise the security bit via
PLOGI's service parameter. The remote device shall respond using the same
service parameter whether it supports it or not.
Link: https://lore.kernel.org/r/20210624052606.21613-8-njavali@marvell.com
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Co-developed-by: Larry Wisneski <Larry.Wisneski@marvell.com>
Signed-off-by: Larry Wisneski <Larry.Wisneski@marvell.com>
Co-developed-by: Duane Grigsby <duane.grigsby@marvell.com>
Signed-off-by: Duane Grigsby <duane.grigsby@marvell.com>
Co-developed-by: Rick Hicksted Jr <rhicksted@marvell.com>
Signed-off-by: Rick Hicksted Jr <rhicksted@marvell.com>
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Some FC adapters from Marvell offer the ability to encrypt data in flight
(EDIF). This feature requires an application to act as an authenticator.
On completion of the authentication process, the authentication application
will notify driver on whether it is successful or not.
In case of success, application will use the QL_VND_SC_AUTH_OK BSG call to
tell driver to proceed to the PRLI phase.
In case of failure, application will use the QL_VND_SC_AUTH_FAIL bsg call
to tell driver to tear down the connection and retry. In the case where an
existing session is active, the re-key process can fail. The session tear
down ensures data is not further compromised.
Link: https://lore.kernel.org/r/20210624052606.21613-7-njavali@marvell.com
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Co-developed-by: Larry Wisneski <Larry.Wisneski@marvell.com>
Signed-off-by: Larry Wisneski <Larry.Wisneski@marvell.com>
Co-developed-by: Duane Grigsby <duane.grigsby@marvell.com>
Signed-off-by: Duane Grigsby <duane.grigsby@marvell.com>
Co-developed-by: Rick Hicksted Jr <rhicksted@marvell.com>
Signed-off-by: Rick Hicksted Jr <rhicksted@marvell.com>
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
