IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
There are some warnings on older compilers (gcc 10, 7) or non-x86_64
architectures (aarch64). As btrfs wants to enable -Wmaybe-uninitialized
by default, fix the warnings even though it's not necessary on recent
compilers (gcc 12+).
../fs/btrfs/volumes.c: In function ‘btrfs_init_new_device’:
../fs/btrfs/volumes.c:2703:3: error: ‘seed_devices’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
2703 | btrfs_setup_sprout(fs_info, seed_devices);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
../fs/btrfs/send.c: In function ‘get_cur_inode_state’:
../include/linux/compiler.h:70:32: error: ‘right_gen’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
70 | (__if_trace.miss_hit[1]++,1) : \
| ^
../fs/btrfs/send.c:1878:6: note: ‘right_gen’ was declared here
1878 | u64 right_gen;
| ^~~~~~~~~
Reported-by: k2ci <kernel-bot@kylinos.cn>
Signed-off-by: Genjian Zhang <zhanggenjian@kylinos.cn>
Reviewed-by: David Sterba <dsterba@suse.com>
[ update changelog ]
Signed-off-by: David Sterba <dsterba@suse.com>
When logging dir dentries of a directory, we iterate over the subvolume
tree to find dir index keys on leaves modified in the current transaction.
This however is heavy on locking, since btrfs_search_forward() may often
keep locks on extent buffers for quite a while when walking the tree to
find a suitable leaf modified in the current transaction and with a key
not smaller than then the provided minimum key. That means it will block
other tasks trying to access the subvolume tree, which may be common fs
operations like creating, renaming, linking, unlinking, reflinking files,
etc.
A better solution is to iterate the log tree, since it's much smaller than
a subvolume tree and just use plain btrfs_search_slot() (or the wrapper
btrfs_for_each_slot()) and only contains dir index keys added in the
current transaction.
The following bonnie++ test on a non-debug kernel (with Debian's default
kernel config) on a 20G null block device, was used to measure the impact:
$ cat test.sh
#!/bin/bash
DEV=/dev/nullb0
MNT=/mnt/nullb0
NR_DIRECTORIES=20
NR_FILES=20480 # must be a multiple of 1024
DATASET_SIZE=$(( (8 * 1024 * 1024 * 1024) / 1048576 )) # 8 GiB as megabytes
DIRECTORY_SIZE=$(( DATASET_SIZE / NR_FILES ))
NR_FILES=$(( NR_FILES / 1024 ))
umount $DEV &> /dev/null
mkfs.btrfs -f $DEV
mount $DEV $MNT
bonnie++ -u root -d $MNT \
-n $NR_FILES:$DIRECTORY_SIZE:$DIRECTORY_SIZE:$NR_DIRECTORIES \
-r 0 -s $DATASET_SIZE -b
umount $MNT
Before patchset:
Version 2.00a ------Sequential Output------ --Sequential Input- --Random-
-Per Chr- --Block-- -Rewrite- -Per Chr- --Block-- --Seeks--
Name:Size etc /sec %CP /sec %CP /sec %CP /sec %CP /sec %CP /sec %CP
debian0 8G 376k 99 1.1g 98 939m 92 1527k 99 3.2g 99 9060 256
Latency 24920us 207us 680ms 5594us 171us 2891us
Version 2.00a ------Sequential Create------ --------Random Create--------
debian0 -Create-- --Read--- -Delete-- -Create-- --Read--- -Delete--
files /sec %CP /sec %CP /sec %CP /sec %CP /sec %CP /sec %CP
20/20 20480 96 +++++ +++ 20480 95 20480 99 +++++ +++ 20480 97
Latency 8708us 137us 5128us 6743us 60us 19712us
After patchset:
Version 2.00a ------Sequential Output------ --Sequential Input- --Random-
-Per Chr- --Block-- -Rewrite- -Per Chr- --Block-- --Seeks--
Name:Size etc /sec %CP /sec %CP /sec %CP /sec %CP /sec %CP /sec %CP
debian0 8G 384k 99 1.2g 99 971m 91 1533k 99 3.3g 99 9180 309
Latency 24930us 125us 661ms 5587us 46us 2020us
Version 2.00a ------Sequential Create------ --------Random Create--------
debian0 -Create-- --Read--- -Delete-- -Create-- --Read--- -Delete--
files /sec %CP /sec %CP /sec %CP /sec %CP /sec %CP /sec %CP
20/20 20480 90 +++++ +++ 20480 99 20480 99 +++++ +++ 20480 97
Latency 7030us 61us 1246us 4942us 56us 16855us
The patchset consists of this patch plus a previous one that has the
following subject:
"btrfs: avoid iterating over all indexes when logging directory"
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When logging a directory, after copying all directory index items from the
subvolume tree to the log tree, we iterate over the subvolume tree to find
all dir index items that are located in leaves COWed (or created) in the
current transaction. If we keep logging a directory several times during
the same transaction, we end up iterating over the same dir index items
everytime we log the directory, wasting time and adding extra lock
contention on the subvolume tree.
So just keep track of the last logged dir index offset in order to start
the search for that index (+1) the next time the directory is logged, as
dir index values (key offsets) come from a monotonically increasing
counter.
The following test measures the difference before and after this change:
$ cat test.sh
#!/bin/bash
DEV=/dev/nullb0
MNT=/mnt/nullb0
umount $DEV &> /dev/null
mkfs.btrfs -f $DEV
mount -o ssd $DEV $MNT
# Time values in milliseconds.
declare -a fsync_times
# Total number of files added to the test directory.
num_files=1000000
# Fsync directory after every N files are added.
fsync_period=100
mkdir $MNT/testdir
fsync_total_time=0
for ((i = 1; i <= $num_files; i++)); do
echo -n > $MNT/testdir/file_$i
if [ $((i % fsync_period)) -eq 0 ]; then
start=$(date +%s%N)
xfs_io -c "fsync" $MNT/testdir
end=$(date +%s%N)
fsync_total_time=$((fsync_total_time + (end - start)))
fsync_times[i]=$(( (end - start) / 1000000 ))
echo -n -e "Progress $i / $num_files\r"
fi
done
echo -e "\nHistogram of directory fsync duration in ms:\n"
printf '%s\n' "${fsync_times[@]}" | \
perl -MStatistics::Histogram -e '@d = <>; print get_histogram(\@d);'
fsync_total_time=$((fsync_total_time / 1000000))
echo -e "\nTotal time spent in fsync: $fsync_total_time ms\n"
echo
umount $MNT
The test was run on a non-debug kernel (Debian's default kernel config)
against a 15G null block device.
Result before this change:
Histogram of directory fsync duration in ms:
Count: 10000
Range: 3.000 - 362.000; Mean: 34.556; Median: 31.000; Stddev: 25.751
Percentiles: 90th: 71.000; 95th: 77.000; 99th: 81.000
3.000 - 5.278: 1423 #################################
5.278 - 8.854: 1173 ###########################
8.854 - 14.467: 591 ##############
14.467 - 23.277: 1025 #######################
23.277 - 37.105: 1422 #################################
37.105 - 58.809: 2036 ###############################################
58.809 - 92.876: 2316 #####################################################
92.876 - 146.346: 6 |
146.346 - 230.271: 6 |
230.271 - 362.000: 2 |
Total time spent in fsync: 350527 ms
Result after this change:
Histogram of directory fsync duration in ms:
Count: 10000
Range: 3.000 - 1088.000; Mean: 8.704; Median: 8.000; Stddev: 12.576
Percentiles: 90th: 12.000; 95th: 14.000; 99th: 17.000
3.000 - 6.007: 3222 #################################
6.007 - 11.276: 5197 #####################################################
11.276 - 20.506: 1551 ################
20.506 - 36.674: 24 |
36.674 - 201.552: 1 |
201.552 - 353.841: 4 |
353.841 - 1088.000: 1 |
Total time spent in fsync: 92114 ms
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
[BUG]
Even before the scrub rework, if we have some corrupted metadata failed
to be repaired during replace, we still continue replacing and let it
finish just as there is nothing wrong:
BTRFS info (device dm-4): dev_replace from /dev/mapper/test-scratch1 (devid 1) to /dev/mapper/test-scratch2 started
BTRFS warning (device dm-4): tree block 5578752 mirror 1 has bad csum, has 0x00000000 want 0xade80ca1
BTRFS warning (device dm-4): tree block 5578752 mirror 0 has bad csum, has 0x00000000 want 0xade80ca1
BTRFS warning (device dm-4): checksum error at logical 5578752 on dev /dev/mapper/test-scratch1, physical 5578752: metadata leaf (level 0) in tree 5
BTRFS warning (device dm-4): checksum error at logical 5578752 on dev /dev/mapper/test-scratch1, physical 5578752: metadata leaf (level 0) in tree 5
BTRFS error (device dm-4): bdev /dev/mapper/test-scratch1 errs: wr 0, rd 0, flush 0, corrupt 1, gen 0
BTRFS warning (device dm-4): tree block 5578752 mirror 1 has bad bytenr, has 0 want 5578752
BTRFS error (device dm-4): unable to fixup (regular) error at logical 5578752 on dev /dev/mapper/test-scratch1
BTRFS info (device dm-4): dev_replace from /dev/mapper/test-scratch1 (devid 1) to /dev/mapper/test-scratch2 finished
This can lead to unexpected problems for the resulting filesystem.
[CAUSE]
Btrfs reuses scrub code path for dev-replace to iterate all dev extents.
But unlike scrub, dev-replace doesn't really bother to check the scrub
progress, which records all the errors found during replace.
And even if we check the progress, we cannot really determine which
errors are minor, which are critical just by the plain numbers.
(remember we don't treat metadata/data checksum error differently).
This behavior is there from the very beginning.
[FIX]
Instead of continuing the replace, just error out if we hit an
unrepaired metadata sector.
Now the dev-replace would be rejected with -EIO, to let the user know.
Although it also means, the filesystem has some metadata error which
cannot be repaired, the user would be upset anyway.
The new dmesg would look like this:
BTRFS info (device dm-4): dev_replace from /dev/mapper/test-scratch1 (devid 1) to /dev/mapper/test-scratch2 started
BTRFS warning (device dm-4): tree block 5578752 mirror 1 has bad csum, has 0x00000000 want 0xade80ca1
BTRFS warning (device dm-4): tree block 5578752 mirror 1 has bad csum, has 0x00000000 want 0xade80ca1
BTRFS error (device dm-4): unable to fixup (regular) error at logical 5570560 on dev /dev/mapper/test-scratch1 physical 5570560
BTRFS warning (device dm-4): header error at logical 5570560 on dev /dev/mapper/test-scratch1, physical 5570560: metadata leaf (level 0) in tree 5
BTRFS warning (device dm-4): header error at logical 5570560 on dev /dev/mapper/test-scratch1, physical 5570560: metadata leaf (level 0) in tree 5
BTRFS error (device dm-4): stripe 5570560 has unrepaired metadata sector at 5578752
BTRFS error (device dm-4): btrfs_scrub_dev(/dev/mapper/test-scratch1, 1, /dev/mapper/test-scratch2) failed -5
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
It's pointless to have a while loop at btrfs_get_next_valid_item(), as if
the slot on the current leaf is beyond the last item, we call
btrfs_next_leaf(), which leaves us at a valid slot of the next leaf (or
a valid slot in the current leaf if after releasing the path an item gets
pushed from the next leaf to the current leaf).
So just call btrfs_next_leaf() if the current slot on the current leaf is
beyond the last item.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Since the introduction of scrub interface, the only flag that we support
is BTRFS_SCRUB_READONLY. Thus there is no sanity checks, if there are
some undefined flags passed in, we just ignore them.
This is problematic if we want to introduce new scrub flags, as we have
no way to determine if such flags are supported.
Address the problem by introducing a check for the flags, and if
unsupported flags are set, return -EOPNOTSUPP to inform the user space.
This check should be backported for all supported kernels before any new
scrub flags are introduced.
CC: stable@vger.kernel.org # 4.14+
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Currently, a limit of 0 results in a hard coded metering over 6 hours.
Since the default is a set limit, I suspect no one truly depends on this
rather arbitrary setting. Repurpose it for an arguably more useful
"unlimited" mode, where the delay is 0.
Note that if block groups are too new, or go fully empty, there is still
a delay associated with those conditions. Those delays implement
heuristics for not trimming a region we are relatively likely to fully
overwrite soon.
CC: stable@vger.kernel.org # 6.2+
Reviewed-by: Neal Gompa <neal@gompa.dev>
Signed-off-by: Boris Burkov <boris@bur.io>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Previously, the default was a relatively conservative 10. This results
in a 100ms delay, so with ~300 discards in a commit, it takes the full
30s till the next commit to finish the discards. On a workstation, this
results in the disk never going idle, wasting power/battery, etc.
Set the default to 1000, which results in using the smallest possible
delay, currently, which is 1ms. This has shown to not pathologically
keep the disk busy by the original reporter.
Link: https://lore.kernel.org/linux-btrfs/Y%2F+n1wS%2F4XAH7X1p@nz/
Link: https://bugzilla.redhat.com/show_bug.cgi?id=2182228
CC: stable@vger.kernel.org # 6.2+
Reviewed-by: Neal Gompa <neal@gompa.dev
Signed-off-by: Boris Burkov <boris@bur.io>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Since the scrub rework, the following RAID56 functions are no longer
called:
- raid56_add_scrub_pages()
- raid56_alloc_missing_rbio()
- raid56_submit_missing_rbio()
Those functions are all utilized by scrub to handle missing device cases
for RAID56.
However the new scrub code handle them in a completely different way:
- If it's data stripe, go recovery path through btrfs_submit_bio()
- If it's P/Q stripe, it would be handled through
raid56_parity_submit_scrub_rbio()
And that function would handle dev-replace and repair properly.
Thus we can safely remove those functions.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Since scrub path has been fully moved to scrub_stripe based facilities,
no more scrub_bio would be submitted.
Thus we can remove it completely, this involves:
- SCRUB_SECTORS_PER_BIO macro
- SCRUB_BIOS_PER_SCTX macro
- SCRUB_MAX_PAGES macro
- BTRFS_MAX_MIRRORS macro
- scrub_bio structure
- scrub_ctx::bios member
- scrub_ctx::curr member
- scrub_ctx::bios_in_flight member
- scrub_ctx::workers_pending member
- scrub_ctx::list_lock member
- scrub_ctx::list_wait member
- function scrub_bio_end_io_worker()
- function scrub_pending_bio_inc()
- function scrub_pending_bio_dec()
- function scrub_throttle()
- function scrub_submit()
- function scrub_find_csum()
- function drop_csum_range()
- Some unnecessary flush and scrub pauses
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Those two structures are used to represent a bunch of sectors for scrub,
but now they are fully replaced by scrub_stripe in one go, so we can
remove them. This involves:
- structure scrub_block
- structure scrub_sector
- structure scrub_page_private
- function attach_scrub_page_private()
- function detach_scrub_page_private()
Now we no longer need to use page::private to handle subpage.
- function alloc_scrub_block()
- function alloc_scrub_sector()
- function scrub_sector_get_page()
- function scrub_sector_get_page_offset()
- function scrub_sector_get_kaddr()
- function bio_add_scrub_sector()
- function scrub_checksum_data()
- function scrub_checksum_tree_block()
- function scrub_checksum_super()
- function scrub_check_fsid()
- function scrub_block_get()
- function scrub_block_put()
- function scrub_sector_get()
- function scrub_sector_put()
- function scrub_bio_end_io()
- function scrub_block_complete()
- function scrub_add_sector_to_rd_bio()
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The old scrub code has different entrance to verify the content, and
since we have removed the writeback path, now we can start removing the
re-check part, including:
- scrub_recover structure
- scrub_sector::recover member
- function scrub_setup_recheck_block()
- function scrub_recheck_block()
- function scrub_recheck_block_checksum()
- function scrub_repair_block_group_good_copy()
- function scrub_repair_sector_from_good_copy()
- function scrub_is_page_on_raid56()
- function full_stripe_lock()
- function search_full_stripe_lock()
- function get_full_stripe_logical()
- function insert_full_stripe_lock()
- function lock_full_stripe()
- function unlock_full_stripe()
- btrfs_block_group::full_stripe_locks_root member
- btrfs_full_stripe_locks_tree structure
This infrastructure is to ensure RAID56 scrub is properly handling
recovery and P/Q scrub correctly.
This is no longer needed, before P/Q scrub we will wait for all
the involved data stripes to be scrubbed first, and RAID56 code has
internal lock to ensure no race in the same full stripe.
- function scrub_print_warning()
- function scrub_get_recover()
- function scrub_put_recover()
- function scrub_handle_errored_block()
- function scrub_setup_recheck_block()
- function scrub_bio_wait_endio()
- function scrub_submit_raid56_bio_wait()
- function scrub_recheck_block_on_raid56()
- function scrub_recheck_block()
- function scrub_recheck_block_checksum()
- function scrub_repair_block_from_good_copy()
- function scrub_repair_sector_from_good_copy()
And two more functions exported temporarily for later cleanup:
- alloc_scrub_sector()
- alloc_scrub_block()
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Since the whole scrub path has been switched to scrub_stripe based
solution, the old writeback path can be removed completely, which
involves:
- scrub_ctx::wr_curr_bio member
- scrub_ctx::flush_all_writes member
- function scrub_write_block_to_dev_replace()
- function scrub_write_sector_to_dev_replace()
- function scrub_add_sector_to_wr_bio()
- function scrub_wr_submit()
- function scrub_wr_bio_end_io()
- function scrub_wr_bio_end_io_worker()
And one more function needs to be exported temporarily:
- scrub_sector_get()
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The structure scrub_parity is used to indicate that some extents are
scrubbed for the purpose of RAID56 P/Q scrubbing.
Since the whole RAID56 P/Q scrubbing path has been replaced with new
scrub_stripe infrastructure, and we no longer need to use scrub_parity
to modify the behavior of data stripes, we can remove it completely.
This removal involves:
- scrub_parity_workers
Now only one worker would be utilized, scrub_workers, to do the read
and repair.
All writeback would happen at the main scrub thread.
- scrub_block::sparity member
- scrub_parity structure
- function scrub_parity_get()
- function scrub_parity_put()
- function scrub_free_parity()
- function __scrub_mark_bitmap()
- function scrub_parity_mark_sectors_error()
- function scrub_parity_mark_sectors_data()
These helpers are no longer needed, scrub_stripe has its bitmaps and
we can use bitmap helpers to get the error/data status.
- scrub_parity_bio_endio()
- scrub_parity_check_and_repair()
- function scrub_sectors_for_parity()
- function scrub_extent_for_parity()
- function scrub_raid56_data_stripe_for_parity()
- function scrub_raid56_parity()
The new code would reuse the scrub read-repair and writeback path.
Just skip the dev-replace phase.
And scrub_stripe infrastructure allows us to submit and wait for those
data stripes before scrubbing P/Q, without extra infrastructure.
The following two functions are temporarily exported for later cleanup:
- scrub_find_csum()
- scrub_add_sector_to_rd_bio()
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Implement the only missing part for scrub: RAID56 P/Q stripe scrub.
The workflow is pretty straightforward for the new function,
scrub_raid56_parity_stripe():
- Go through the regular scrub path for each data stripe
- Wait for the verification and repair to finish
- Writeback the repaired sectors to data stripes
- Make sure all stripes are properly repaired
If we have sectors unrepaired, we cannot continue, or we could further
corrupt the P/Q stripe.
- Submit the rbio for P/Q stripe
The dev-replace would be handled inside
raid56_parity_submit_scrub_rbio() path.
- Wait for the above bio to finish
Although the old code is no longer used, we still keep the declaration,
as the cleanup can be several times larger than this patch itself.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Switch scrub_simple_mirror() to the new scrub_stripe infrastructure.
Since scrub_simple_mirror() is the core part of scrub (only RAID56
P/Q stripes don't utilize it), we can get rid of a big chunk of code,
mostly scrub_extent(), scrub_sectors() and directly called functions.
There is a functionality change:
- Scrub speed throttle now only affects read on the scrubbing device
Writes (for repair and replace), and reads from other mirrors won't
be limited by the set limits.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The new helper, queue_scrub_stripe(), would try to queue a stripe for
scrub. If all stripes are already in use, we will submit all the
existing ones and wait for them to finish.
Currently we would queue up to 8 stripes, to enlarge the blocksize to
512KiB to improve the performance. Sectors repaired on zoned need to be
relocated instead of in-place fix.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The new helper, scrub_stripe_report_errors(), will report the result of
the scrub to system log.
The main reporting is done by introducing a new helper,
scrub_print_common_warning(), which is mostly the same content from
scrub_print_wanring(), but without the need for a scrub_block.
Since we're reporting the errors, it's the perfect time to update the
scrub stats too.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Add a new helper, scrub_write_sectors(), to submit write bios for
specified sectors to the target disk.
There are several differences compared to read path:
- Utilize btrfs_submit_scrub_write()
Now we still rely on the @mirror_num based writeback, but the
requirement is also a little different than regular writeback or read,
thus we have to call btrfs_submit_scrub_write().
- We cannot write the full stripe back
We can only write the sectors we have. There will be two call sites
later, one for repaired sectors, one for all utilized sectors of
dev-replace.
Thus the callers should specify their own write_bitmap.
This function only submit the bios, will not wait for them unless for
zoned case.
Caller must explicitly wait for the IO to finish.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The new helper, scrub_stripe_read_repair_worker(), would handle the
read-repair part:
- Wait for the previous submitted read IO to finish
- Verify the contents of the stripe
- Go through the remaining mirrors, using as large blocksize as possible
At this stage, we just read out all the failed sectors from each
mirror and re-verify.
If no more failed sector, we can exit.
- Go through all mirrors again, sector-by-sector
This time, we read sector by sector, this is to address cases where
one bad sector mismatches the drive's internal checksum, and cause the
whole read range to fail.
We put this recovery method as the last resort, as sector-by-sector
reading is slow, and reading from other mirrors may have already fixed
the errors.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The new helper, scrub_verify_stripe(), shares the same main workflow of
the old scrub code.
The major differences are:
- How pages/page_offset is grabbed
Everything can be grabbed from scrub_stripe easily.
- When error report happens
Currently the helper only verifies the sectors, not really doing any
error reporting.
The error reporting would be done after we have done the repair.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The new helper, scrub_verify_one_metadata(), is almost the same as
scrub_checksum_tree_block().
The difference is in how we grab the pages from other structures.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The new helper will search the extent tree to find the first extent of a
logical range, then fill the sectors array by two loops:
- Loop 1 to fill common bits and metadata generation
- Loop 2 to fill csum data (only for data bgs)
This loop will use the new btrfs_lookup_csums_bitmap() to fill
the full csum buffer, and set scrub_sector_verification::csum.
With all the needed info filled by this function, later we only need to
submit and verify the stripe.
Here we temporarily export the helper to avoid warning on unused static
function.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This patch introduces the following structures:
- scrub_sector_verification
Contains all the needed info to verify one sector (data or metadata).
- scrub_stripe
Contains all needed members (mostly bitmap based) to scrub one stripe
(with a length of BTRFS_STRIPE_LEN).
The basic idea is, we keep the existing per-device scrub behavior, but
merge all the scrub_bio/scrub_bio into one generic structure, and read
the full BTRFS_STRIPE_LEN stripe on the first try.
This means we will read some sectors which are not scrub target, but
that's fine. At dev-replace time we only writeback the utilized and good
sectors, and for read-repair we only writeback the repaired sectors.
With every read submitted in BTRFS_STRIPE_LEN, the need for complex bio
form shaping would be gone.
Although to get the same performance of the old scrub behavior, we would
need to submit the initial read for two stripes at once.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Both scrub and read-repair are utilizing a special repair writes that:
- Only writes back to a single device
Even for read-repair on RAID56, we only update the corrupted data
stripe itself, not triggering the full RMW path.
- Requires a valid @mirror_num
For RAID56 case, only @mirror_num == 1 is valid.
For non-RAID56 cases, we need @mirror_num to locate our stripe.
- No data csum generation needed
These two call sites still have some differences though:
- Read-repair goes plain bio
It doesn't need a full btrfs_bio, and goes submit_bio_wait().
- New scrub repair would go btrfs_bio
To simplify both read and write path.
So here this patch would:
- Introduce a common helper, btrfs_map_repair_block()
Due to the single device nature, we can use an on-stack
btrfs_io_stripe to pass device and its physical bytenr.
- Introduce a new interface, btrfs_submit_repair_bio(), for later scrub
code
This is for the incoming scrub code.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Currently we're doing a lot of work for btrfs_bio:
- Checksum verification for data read bios
- Bio splits if it crosses stripe boundary
- Read repair for data read bios
However for the incoming scrub patches, we don't want this extra
functionality at all, just plain logical + mirror -> physical mapping
ability.
Thus here we do the following changes:
- Introduce btrfs_bio::fs_info
This is for the new scrub specific btrfs_bio, which would not populate
btrfs_bio::inode.
Thus we need such new member to grab a fs_info
This new member will always be populated.
- Replace @inode argument with @fs_info for btrfs_bio_init() and its
caller
Since @inode is no longer a mandatory member, replace it with
@fs_info, and let involved users populate @inode.
- Skip checksum verification and generation if @bbio->inode is NULL
- Add extra ASSERT()s
To make sure:
* bbio->inode is properly set for involved read repair path
* if @file_offset is set, bbio->inode is also populated
- Grab @fs_info from @bbio directly
We can no longer go @bbio->inode->root->fs_info, as bbio->inode can be
NULL. This involves:
* btrfs_simple_end_io()
* should_async_write()
* btrfs_wq_submit_bio()
* btrfs_use_zone_append()
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
There is really no need to go through the super complex scrub_sectors()
to just handle super blocks. Introduce a dedicated function to handle
super block scrubbing.
This new function will introduce a behavior change, instead of using the
complex but concurrent scrub_bio system, here we just go submit-and-wait.
There is really not much sense to care the performance of super block
scrubbing. It only has 3 super blocks at most, and they are all
scattered around the devices already.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Commit 321f69f86a0f ("btrfs: reset device back to allocation state when
removing") included adding extent_io_tree_release(&device->alloc_state)
to btrfs_close_one_device(), which had already been called in
btrfs_free_device().
The alloc_state tree (IO_TREE_DEVICE_ALLOC_STATE), is created in
btrfs_alloc_device() and released in btrfs_close_one_device(). Therefore,
the additional call to extent_io_tree_release(&device->alloc_state) in
btrfs_free_device() is unnecessary and can be removed.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
During my recent search for the root cause of a reported bug, I realized
that it's a good idea to issue a warning for missed cleanup instead of
using debug-only assertions. Since most installations run with debug off,
missed cleanups and premature calls to close could go unnoticed. However,
these issues are serious enough to warrant reporting and fixing.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Btrfs can use various different checksumming algorithms, and prints
the one used for a given file system at mount time. Don't bother
printing the crc32c implementation at module load time, the information
is available in /sys/fs/btrfs/FSID/checksum.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The tree-log code has three almost identical copies for the accounting on
an extent_buffer that doesn't need to be written any more. The only
difference is that walk_down_log_tree passed the bytenr used to find the
buffer instead of extent_buffer.start and calculates the length using the
nodesize, while the other two callers look at the extent_buffer.len
field that must always be equivalent to the nodesize.
Factor the code into a common helper.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Guard all the code to punt bios to a per-cgroup submission helper by a
new CONFIG_BLK_CGROUP_PUNT_BIO symbol that is selected by btrfs.
This way non-btrfs kernel builds don't need to have this code.
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
REQ_CGROUP_PUNT is a bit annoying as it is hard to follow and adds
a branch to the bio submission hot path. To fix this, export
blkcg_punt_bio_submit and let btrfs call it directly. Add a new
REQ_FS_PRIVATE flag for btrfs to indicate to it's own low-level
bio submission code that a punt to the cgroup submission helper
is required.
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
punt_to_cgroup is only used by extent_write_locked_range, but that
function also directly controls the bio flags for the actual submission.
Remove th punt_to_cgroup field, and just set REQ_CGROUP_PUNT directly
in extent_write_locked_range.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David Sterba <dsterba@suse.com>
submit_one_async_extent needs to use submit_one_async_extent no matter
if the range it handles ends up beeing compressed or not as the deadlock
risk due to cgroup thottling is the same. Call kthread_associate_blkcg
earlier to cover submit_uncompressed_range case as well.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Let submit_one_async_extent, which is the only caller of
submit_uncompressed_range handle freeing of the async_extent in one
central place.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
btrfs_submit_compressed_write should not have to care if it is called
from a helper thread or not. Move the kthread_associate_blkcg handling
into submit_one_async_extent, as that is the one caller that needs it.
Also move the assignment of REQ_CGROUP_PUNT into cow_file_range_async,
as that is the routine that sets up the helper thread offload.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When starting a transaction, we are assuming the number of bytes used for
each delayed ref update matches the number of bytes used for each item
update, that is the return value of:
btrfs_calc_insert_metadata_size(fs_info, num_items)
However that is not correct when we are using the free space tree, as we
need to multiply that value by 2, since delayed ref updates need to modify
the free space tree besides the extent tree.
So fix this by using btrfs_calc_delayed_ref_bytes() to get the correct
number of bytes used for delayed ref updates.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When starting a transaction we are comparing the result of a call to
btrfs_block_rsv_full() with 0, but the function returns a boolean. While
in practice it is not incorrect, as 0 is equivalent to false, it makes it
a bit odd and less readable. So update the check to not compare against 0
and instead use the logical not (!) operator.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
If an application is doing direct io to a btrfs file and experiences a
page fault reading from the write buffer, iomap will issue a partial
bio, and allow the fs to keep going. However, there was a subtle bug in
this code path in the btrfs dio iomap implementation that led to the
partial write ending up as a gap in the file's extents and to be read
back as zeros.
The sequence of events in a partial write, lightly summarized and
trimmed down for brevity is as follows:
==== WRITING TASK ====
btrfs_direct_write
__iomap_dio_write
iomap_iter
btrfs_dio_iomap_begin # create full ordered extent
iomap_dio_bio_iter
bio_iov_iter_get_pages # page fault; partial read
submit_bio # partial bio
iomap_iter
btrfs_dio_iomap_end
btrfs_mark_ordered_io_finished # sets BTRFS_ORDERED_IOERR;
# submit to finish_ordered_fn wq
fault_in_iov_iter_readable # btrfs_direct_write detects partial write
__iomap_dio_write
iomap_iter
btrfs_dio_iomap_begin # create second partial ordered extent
iomap_dio_bio_iter
bio_iov_iter_get_pages # read all of remainder
submit_bio # partial bio with all of remainder
iomap_iter
btrfs_dio_iomap_end # nothing exciting to do with ordered io
==== DIO ENDIO ====
== FIRST PARTIAL BIO ==
btrfs_dio_end_io
btrfs_mark_ordered_io_finished # bytes_left > 0
# don't submit to finish_ordered_fn wq
== SECOND PARTIAL BIO ==
btrfs_dio_end_io
btrfs_mark_ordered_io_finished # bytes_left == 0
# submit to finish_ordered_fn wq
==== BTRFS FINISH ORDERED WQ ====
== FIRST PARTIAL BIO ==
btrfs_finish_ordered_io # called by dio_iomap_end_io, sees
# BTRFS_ORDERED_IOERR, just drops the
# ordered_extent
==SECOND PARTIAL BIO==
btrfs_finish_ordered_io # called by btrfs_dio_end_io, writes out file
# extents, csums, etc...
The essence of the problem is that while btrfs_direct_write and iomap
properly interact to submit all the correct bios, there is insufficient
logic in the btrfs dio functions (btrfs_dio_iomap_begin,
btrfs_dio_submit_io, btrfs_dio_end_io, and btrfs_dio_iomap_end) to
ensure that every bio is at least a part of a completed ordered_extent.
And it is completing an ordered_extent that results in crucial
functionality like writing out a file extent for the range.
More specifically, btrfs_dio_end_io treats the ordered extent as
unfinished but btrfs_dio_iomap_end sets BTRFS_ORDERED_IOERR on it.
Thus, the finish io work doesn't result in file extents, csums, etc.
In the aftermath, such a file behaves as though it has a hole in it,
instead of the purportedly written data.
We considered a few options for fixing the bug:
1. treat the partial bio as if we had truncated the file, which would
result in properly finishing it.
2. split the ordered extent when submitting a partial bio.
3. cache the ordered extent across calls to __iomap_dio_rw in
iter->private, so that we could reuse it and correctly apply
several bios to it.
I had trouble with 1, and it felt the most like a hack, so I tried 2
and 3. Since 3 has the benefit of also not creating an extra file
extent, and avoids an ordered extent lookup during bio submission, it
felt like the best option. However, that turned out to re-introduce a
deadlock which this code discarding the ordered_extent between faults
was meant to fix in the first place. (Link to an explanation of the
deadlock below.)
Therefore, go with fix 2, which requires a bit more setup work but fixes
the corruption without introducing the deadlock, which is fundamentally
caused by the ordered extent existing when we attempt to fault in a
range that overlaps with it.
Put succinctly, what this patch does is: when we submit a dio bio, check
if it is partial against the ordered extent stored in dio_data, and if it
is, extract the ordered_extent that matches the bio exactly out of the
larger ordered_extent. Keep the remaining ordered_extent around in dio_data
for cancellation in iomap_end.
Thanks to Josef, Christoph, and Filipe with their help figuring out the
bug and the fix.
Fixes: 51bd9563b678 ("btrfs: fix deadlock due to page faults during direct IO reads and writes")
Link: https://bugzilla.redhat.com/show_bug.cgi?id=2169947
Link: https://lore.kernel.org/linux-btrfs/aa1fb69e-b613-47aa-a99e-a0a2c9ed273f@app.fastmail.com/
Link: https://pastebin.com/3SDaH8C6
Link: https://lore.kernel.org/linux-btrfs/20230315195231.GW10580@twin.jikos.cz/T/#t
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Tested-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Boris Burkov <boris@bur.io>
[ hch: refactored the ordered_extent extraction ]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David Sterba <dsterba@suse.com>
NOCOW writes just overwrite an existing extent map, which thus should
not be split in btrfs_extract_ordered_extent. The NOCOW case can't
currently happen as btrfs_extract_ordered_extent is only used on zoned
devices that do not support NOCOW writes, but this will change soon.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Tested-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Boris Burkov <boris@bur.io>
[ hch: split from a larger patch, wrote a commit log ]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David Sterba <dsterba@suse.com>
To prepare for a new caller that already has the ordered_extent
available, change btrfs_extract_ordered_extent to take an argument
for it. Add a wrapper for the bio case that still has to do the
lookup (for now).
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Tested-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
split_zoned_em is only ever asked to split out the beginning of an extent
map. Change it to only take a len to split out instead of a pre and post
region.
Also rename the function to split_extent_map as there is nothing zoned
device specific about it.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Tested-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David Sterba <dsterba@suse.com>
The function btrfs_clone_ordered_extent is very specific to the usage in
btrfs_split_ordered_extent. Now that only a single call to
btrfs_clone_ordered_extent is left, just fold it into
btrfs_split_ordered_extent to make the operation more clear.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Tested-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David Sterba <dsterba@suse.com>
btrfs_split_ordered_extent is only ever asked to split out the beginning
of an ordered_extent (i.e. post == 0). Change it to only take a len to
split out, and switch it to allocate the new extent for the beginning,
as that helps with callers that want to keep a pointer to the
ordered_extent that it is stealing from.
Reviewed-by: Naohiro Aota <naohiro.aota@wdc.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Tested-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David Sterba <dsterba@suse.com>
btrfs_extract_ordered_extent is always used to split an ordered_extent
and extent_map into two parts, so it doesn't need to deal with a three
way split.
Simplify it by only allowing for a single split point, and always split
out the beginning of the extent, as that is what we'll later need to
be able to hold on to a reference to the original ordered_extent that
the first part is split off for submission.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Tested-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David Sterba <dsterba@suse.com>
Move the three checks that are about ordered extent internal sanity
checking into btrfs_split_ordered_extent instead of doing them in the
higher level btrfs_extract_ordered_extent routine.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Tested-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
While it is not feasible for an ordered extent to survive across the
calls btrfs_direct_write makes into __iomap_dio_rw, it is still helpful
to stash it on the dio_data in between creating it in iomap_begin and
finishing it in either end_io or iomap_end.
The specific use I have in mind is that we can check if a particular bio
is partial in submit_io without unconditionally looking up the ordered
extent. This is a preparatory patch for a later patch which does just
that.
Reviewed-by: Naohiro Aota <naohiro.aota@wdc.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Tested-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Boris Burkov <boris@bur.io>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David Sterba <dsterba@suse.com>
The ordered_extent flags are declared as unsigned long, so pass them as
such to btrfs_add_ordered_extent.
Reviewed-by: Naohiro Aota <naohiro.aota@wdc.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Tested-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Boris Burkov <boris@bur.io>
[ hch: split from a larger patch ]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
